MSA-1395: Smart Family Presence is a smart app with no handlers or device type dependencies.

The presence sensors have little/no configuration, especially when it comes to alerts.  I found lots of room for improvement regarding how those alerts are carried out.  Here are the problems with the original implementation of presence alerts:

1)  Each person gets and individual alert.  If you have a family of 4, each person will receive a *separate* alert for every person.
2)  There are no exceptions.  Even if the family is all together, it still individually alerts that everyone arrived/departed.
3)  Since you can't control which person gets the push alert, #1 and #2 exacerbate the issue by people receiving alerts for themselves.

The Smart Family Presence app lets the user select how and when they receive alerts.  The code is commented to explain the edge cases, but essentially, if the family arrives or departs together, no alert should be sent.  The app tracks state for whether the family was previously apart, so that it knows when and when not to send alerts.

I have found this code extremely fun to write and configure, and I believe others out in the community could benefit from it as I saw very few smart apps related to presence sensors themselves.

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-
+        
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    }
-
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
@@ -22,25 +22,24 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -73,10 +72,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -90,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -101,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -127,7 +126,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -137,14 +136,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +152,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -169,7 +168,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -202,7 +201,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -215,11 +214,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -230,8 +229,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -277,7 +275,7 @@ def refresh() {
 
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
+	
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-
+    	
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+        
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+        
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
-
+ 
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -262,7 +261,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-
+    
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -275,24 +274,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-
+        
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
+        
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -300,11 +299,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [
-
+    [	
+    	
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-
+        
     ]
 }
 private hex(value) {

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -83,12 +83,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }
@@ -175,7 +175,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }

smartapps/ddspivey/smart-family-presence.src/smart-family-presence.groovy

@@ -0,0 +1,251 @@
+/**
+ *  Smart Family Presence
+ *
+ *  Copyright 2016 Darin Spivey
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Smart Family Presence",
+    namespace: "ddspivey",
+    author: "Darin Spivey",
+    description: "Smart arrival and departure push messages for couples/families that are traveling together.  When family members arrive and depart together, there is no need to send an individual push alert for each.",
+    category: "Family",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png")
+
+
+preferences {
+	section("Family Members") {
+		input "familySensors", "capability.presenceSensor", required: true, title: "Who's in your family?", multiple: true
+	}
+    section("Threshold") {
+    	paragraph "Set the time in seconds to allow for group arrival/departure"
+    	input "timeThreshold", "text", required: false, title: "Default is ${defaultThreshold}."
+    }
+	section("Smart departure alerts") {
+    	paragraph "When family members are home together, departure push alerts may not be necessary because most of the time, people are aware when their family members are leaving.  This feature will only send a push alert if the the entire family was previously apart."
+		paragraph "For example, when my wife and I are home together, I know when she's leaving; I don't need an alert for that.  If this feature is off, it will send a departure alert when she leaves."
+        input("smartDepartureFeature", "enum", title: "Default is On.", default:"On", options: ["On","Off"])
+	}
+    section("Verbose logging") {
+    	paragraph "For debugging, you may log all the app's decisions to the notifications log."
+    	input("logToNotifications", "enum", title: "Default is No.", default:"No", options: ["Yes", "No" ])
+	}
+}
+
+/****************************
+	Auto-getters and setters
+*****************************/
+
+def getDefaultThreshold() {
+	60
+}
+
+def setInProgress(value) {
+	state.inProgress = value
+}
+
+def getInProgress() {
+	state.inProgress == true
+}
+
+def getSmartDeparture() {
+	settings.smartDepartureFeature == 'On'
+}
+
+def getLogToNotifications() {
+	settings.logToNotifications == 'Yes'
+}
+
+def getThreshold() {
+	settings.timeThreshold ? settings.timeThreshold.toInteger() : defaultThreshold
+}
+
+/****************************
+ Framework methods
+*****************************/
+
+def installed() {
+	initialize()
+}
+ 
+def logit(msg) {
+	log.debug msg
+    if (logToNotifications) {
+    	sendNotificationEvent("[Smart Family Presense] $msg")
+    }
+}
+
+def updated() {
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+    subscribe(familySensors, "presence", presenceHandler)
+    log.debug("Subscribed ${familySensors.toString()} to presenceHandler")
+
+	/*
+    	Regular usage shows that, during certain cases such as the hub going offline,
+        or power outages, the app may lose state and not send alerts.  This will ensure that
+        it re-evaluates its state at least once per hour.
+    */
+    
+	logit "Scheduling a re-calibration at the top of every hour."
+    schedule("0 0 0/1 1/1 * ? *", reset)
+	reset()
+}
+
+/*****************************
+ Smart Family Presence methods
+******************************/
+
+def reset() {
+	if (inProgress) {
+    	logit "Skipping re-calibration, execution in progress!"
+        return
+    }    
+    logit "Re-calibrating."
+    state.baseCase = null
+    state.changedThisTime = []
+    wasApart()
+}
+
+def isFamilyTogether() {
+	// Check to see if the entire family has arrived/departed together
+
+	if (state.changedThisTime.size() == 0) {
+    	logit "No changes."
+        reset()
+    	return
+	}
+    
+	logit "People who changed presence: ${state.changedThisTime}"
+
+	def theirState = state.baseCase
+  	def notTogether = statusNotEquals(theirState)
+    
+  	if (notTogether) {
+    	// The family is not together, send an alert as normal
+        
+    	logit "${notTogether.join(", ")} is not with the rest of the family (who are $theirState)"
+        sendPushAlert()
+    }
+    else {
+    	/* 
+        	Special case - When everyone is gone, but they *previously* weren't together,
+        	then technically they were apart to begin with and are still apart upon leaving
+        */
+            
+        if (state.wasApart && theirState == 'not present') {
+           	logit "Family was previously apart and now all gone.  Alert."
+        	sendPushAlert()
+        }
+        else {    
+    		logit "OK!  Everyone has arrived/departed together.  The family is $theirState"
+        }
+    }
+    inProgress = false
+    reset()
+}
+
+def wasApart() {
+	// This is true if everyone is gone, or some were home
+	def allGone = statusEquals('not present') == familySensors
+    def someHome = statusEquals('present') != familySensors
+    if (allGone || someHome) {
+    	state.wasApart = true
+    }
+    else {
+    	state.wasApart = false
+    }
+}
+
+
+def presenceHandler(evt) {
+    def person = evt.displayName
+
+	logit "Presence Event: $person is $evt.value"
+    
+	if (! inProgress) {
+    	inProgress = true
+    	state.baseCase = evt.value
+        logit "First person sensed.  Checking for others to be $evt.value in ${threshold} seconds"
+        runIn(threshold, isFamilyTogether, [overwrite: false])
+	}
+    
+	if (! state.changedThisTime.contains(person)) {    
+    	state.changedThisTime.push person
+    }
+    else {
+    	// Special case - presence has changed within the threshold.  Remove this person.
+        state.changedThisTime = state.changedThisTime - person
+		logit "Ignoring flapping presence event for $person"
+    }
+}
+
+def statusEquals(status) {
+	if (status == null) return
+    
+	familySensors.findAll {
+        it.currentPresence == status
+    }
+}
+
+def statusNotEquals(status) {
+	if (status == null) return
+      
+	familySensors.findAll {
+        it.currentPresence != status 
+    }
+}
+
+def sendPushAlert() {
+	def baseCase = state.baseCase
+    def changedPeople = state.changedThisTime
+    
+    if (baseCase == 'not present' && state.wasApart == false && smartDeparture) {
+      logit "Not sending departure alert because smartDeparture is $smartDeparture"
+        return
+    }
+    
+	def statuses = [ 'present':[], 'not present':[] ]
+
+	for (sensor in familySensors) {
+    	def person = sensor.toString()       
+        if (changedPeople.contains(person)) {
+        	def currentState = sensor.currentPresence
+        	log.debug "$person is now $currentState"
+            statuses[currentState].push person
+        } 
+	}
+    logit "Statuses: $statuses"
+    
+    // Construct the message payload
+    
+    def pushMsg = ""    
+    def home = statuses.present
+    def notHome = statuses['not present']
+ 	String adVerb;
+   
+    if (home.size() > 0) {
+    	adVerb = home.size > 1 ? "have" : "has"
+    	pushMsg += "${home.join(", ")} $adVerb arrived $location.name. "
+    }
+    if (notHome.size() > 0) {
+    	adVerb = notHome.size > 1 ? "have" : "has"
+    	pushMsg += "${notHome.join(", ")} $adVerb left $location.name"
+    }    	
+    
+    sendPush pushMsg
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+    
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-
+    
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)
+        if (huesettings.saturation != null)   
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-
-    // Default behavior is to turn light on
+    
+    // Default behavior is to turn light on 
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else
+        else 
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"