MSA-1395: Smart Family Presence is a smart app with no handlers or device type dependencies.

The presence sensors have little/no configuration, especially when it comes to alerts.  I found lots of room for improvement regarding how those alerts are carried out.  Here are the problems with the original implementation of presence alerts:

1)  Each person gets and individual alert.  If you have a family of 4, each person will receive a *separate* alert for every person.
2)  There are no exceptions.  Even if the family is all together, it still individually alerts that everyone arrived/departed.
3)  Since you can't control which person gets the push alert, #1 and #2 exacerbate the issue by people receiving alerts for themselves.

The Smart Family Presence app lets the user select how and when they receive alerts.  The code is commented to explain the edge cases, but essentially, if the family arrives or departs together, no alert should be sent.  The app tracks state for whether the family was previously apart, so that it knows when and when not to send alerts.

I have found this code extremely fun to write and configure, and I believe others out in the community could benefit from it as I saw very few smart apps related to presence sensors themselves.

devicetypes/smartthings-users/nest.src/nest.groovy

@@ -1,600 +0,0 @@
-/**
- *  Nest Direct
- *
- *  Author: dianoga7@3dgo.net
- *  Code: https://github.com/smartthings-users/device-type.nest
- *
- * INSTALLATION
- * =========================================
- * 1) Create a new device type (https://graph.api.smartthings.com/ide/devices)
- *     Name: Nest
- *     Author: dianoga7@3dgo.net
- *     Capabilities:
- *         Polling
- *         Relative Humidity Measurement
- *         Thermostat
- *         Temperature Measurement
- *         Presence Sensor
- *         Sensor
- *     Custom Attributes:
- *         temperatureUnit
- *     Custom Commands:
- *         away
- *         present
- *         setPresence
- *         heatingSetpointUp
- *         heatingSetpointDown
- *         coolingSetpointUp
- *         coolingSetpointDown
- *         setFahrenheit
- *         setCelsius
- *
- * 2) If you want to switch from slider controls to buttons, comment out the slider details line and uncomment the button details line.
- *
- * 3) Create a new device (https://graph.api.smartthings.com/device/list)
- *     Name: Your Choice
- *     Device Network Id: Your Choice
- *     Type: Nest (should be the last option)
- *     Location: Choose the correct location
- *     Hub/Group: Leave blank
- *
- * 4) Update device preferences
- *     Click on the new device to see the details.
- *     Click the edit button next to Preferences
- *     Fill in your information.
- *     To find your serial number, login to http://home.nest.com. Click on the thermostat
- *     you want to control. Under settings, go to Technical Info. Your serial number is
- *     the second item.
- *
- * 5) That's it, you're done.
- *
- * Copyright (C) 2013 Brian Steere <dianoga7@3dgo.net>
- * Permission is hereby granted, free of charge, to any person obtaining a copy of this
- * software and associated documentation files (the "Software"), to deal in the Software
- * without restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to the following
- * conditions: The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
- * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
- * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
- * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- */
-
-preferences {
-	input("username", "text", title: "Username", description: "Your Nest username (usually an email address)")
-	input("password", "password", title: "Password", description: "Your Nest password")
-	input("serial", "text", title: "Serial #", description: "The serial number of your thermostat")
-}
-
-// for the UI
-metadata {
-	definition (name: "Nest", namespace: "smartthings-users", author: "dianoga7@3dgo.net") {
-		capability "Polling"
-		capability "Relative Humidity Measurement"
-		capability "Thermostat"
-		capability "Temperature Measurement"
-		capability "Presence Sensor"
-		capability "Sensor"
-
-		command "away"
-		command "present"
-		command "setPresence"
-		command "heatingSetpointUp"
-		command "heatingSetpointDown"
-		command "coolingSetpointUp"
-		command "coolingSetpointDown"
-		command "setFahrenheit"
-		command "setCelsius"
-
-		attribute "temperatureUnit", "string"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		valueTile("temperature", "device.temperature", canChangeIcon: true, canChangeBackground:true) {
-			state("temperature", label: '${currentValue}°', backgroundColors: [
-				// Celsius Color Range
-				[value: 0, color: "#153591"],
-				[value: 7, color: "#1e9cbb"],
-				[value: 15, color: "#90d2a7"],
-				[value: 23, color: "#44b621"],
-				[value: 29, color: "#f1d801"],
-				[value: 33, color: "#d04e00"],
-				[value: 36, color: "#bc2323"],
-				// Fahrenheit Color Range
-				[value: 40, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-			)
-		}
-
-		standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: true, decoration: "flat") {
-			state("auto", action:"thermostat.off", icon: "st.thermostat.auto")
-			state("off", action:"thermostat.cool", icon: "st.thermostat.heating-cooling-off")
-			state("cool", action:"thermostat.heat", icon: "st.thermostat.cool")
-			state("heat", action:"thermostat.auto", icon: "st.thermostat.heat")
-		}
-
-		standardTile("thermostatFanMode", "device.thermostatFanMode", inactiveLabel: true, decoration: "flat") {
-			state "auto", action:"thermostat.fanOn", icon: "st.thermostat.fan-auto"
-			state "on", action:"thermostat.fanCirculate", icon: "st.thermostat.fan-on"
-			state "circulate", action:"thermostat.fanAuto", icon: "st.thermostat.fan-circulate"
-		}
-
-		valueTile("heatingSetpoint", "device.heatingSetpoint") {
-			state "default", label:'${currentValue}°', unit:"Heat", backgroundColor:"#bc2323"
-		}
-
-		valueTile("coolingSetpoint", "device.coolingSetpoint") {
-			state "default", label:'${currentValue}°', unit:"Cool", backgroundColor:"#1e9cbb"
-		}
-
-		standardTile("thermostatOperatingState", "device.thermostatOperatingState", inactiveLabel: false, decoration: "flat") {
-			state "idle", action:"polling.poll", label:'${name}', icon: "st.sonos.pause-icon"
-			state "cooling", action:"polling.poll", label:'  ', icon: "st.thermostat.cooling", backgroundColor:"#1e9cbb"
-			state "heating", action:"polling.poll", label:'  ', icon: "st.thermostat.heating", backgroundColor:"#bc2323"
-			state "fan only", action:"polling.poll", label:'${name}', icon: "st.Appliances.appliances11"
-		}
-
-		valueTile("humidity", "device.humidity", inactiveLabel: false) {
-			state "default", label:'${currentValue}%', unit:"Humidity"
-		}
-
-		standardTile("presence", "device.presence", inactiveLabel: false, decoration: "flat") {
-			state "present", label:'${name}', action:"away", icon: "st.Home.home2"
-			state "not present", label:'away', action:"present", icon: "st.Transportation.transportation5"
-		}
-
-		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"polling.poll", icon:"st.secondary.refresh"
-		}
-
-		standardTile("temperatureUnit", "device.temperatureUnit", canChangeIcon: false) {
-			state "fahrenheit",  label: "°F", icon: "st.alarm.temperature.normal", action:"setCelsius"
-			state "celsius", label: "°C", icon: "st.alarm.temperature.normal", action:"setFahrenheit"
-		}
-
-		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", label:'Set temperature to', action:"thermostat.setHeatingSetpoint"
-		}
-		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", label:'Set temperature to', action:"thermostat.setCoolingSetpoint"
-		}
-
-		standardTile("heatingSetpointUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "heatingSetpointUp", label:'  ', action:"heatingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#bc2323"
-		}
-
-		standardTile("heatingSetpointDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "heatingSetpointDown", label:'  ', action:"heatingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#bc2323"
-		}
-
-		standardTile("coolingSetpointUp", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "coolingSetpointUp", label:'  ', action:"coolingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#1e9cbb"
-		}
-
-		standardTile("coolingSetpointDown", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "coolingSetpointDown", label:'  ', action:"coolingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#1e9cbb"
-		}
-
-		main(["temperature", "thermostatOperatingState", "humidity"])
-
-		// ============================================================
-		// Slider or Buttons...
-		// To expose buttons, comment out the first detials line below and uncomment the second details line below.
-		// To expose sliders, uncomment the first details line below and comment out the second details line below.
-
-		details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpoint", "heatSliderControl", "coolingSetpoint", "coolSliderControl", "temperatureUnit", "refresh"])
-		// details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpointDown", "heatingSetpoint", "heatingSetpointUp", "coolingSetpointDown", "coolingSetpoint", "coolingSetpointUp", "temperatureUnit", "refresh"])
-
-		// ============================================================
-
-	}
-
-}
-
-// parse events into attributes
-def parse(String description) {
-
-}
-
-// handle commands
-def setHeatingSetpoint(temp) {
-	def latestThermostatMode = device.latestState('thermostatMode')
-	def temperatureUnit = device.latestValue('temperatureUnit')
-
-	switch (temperatureUnit) {
-		case "celsius":
-			if (temp) {
-				if (temp < 9) {
-					temp = 9
-				}
-				if (temp > 32) {
-					temp = 32
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_low': temp]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				} else if (latestThermostatMode.stringValue == 'heat') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
-							sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				}
-			}
-			break;
-		default:
-			if (temp) {
-				if (temp < 51) {
-					temp = 51
-				}
-				if (temp > 89) {
-					temp = 89
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_low': fToC(temp)]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				} else if (latestThermostatMode.stringValue == 'heat') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				}
-			}
-			break;
-	}
-	poll()
-}
-
-def coolingSetpointUp(){
-	int newSetpoint = device.currentValue("coolingSetpoint") + 1
-	log.debug "Setting cool set point up to: ${newSetpoint}"
-	setCoolingSetpoint(newSetpoint)
-}
-
-def coolingSetpointDown(){
-	int newSetpoint = device.currentValue("coolingSetpoint") - 1
-	log.debug "Setting cool set point down to: ${newSetpoint}"
-	setCoolingSetpoint(newSetpoint)
-}
-
-def setCoolingSetpoint(temp) {
-	def latestThermostatMode = device.latestState('thermostatMode')
-	def temperatureUnit = device.latestValue('temperatureUnit')
-
-	switch (temperatureUnit) {
-		case "celsius":
-			if (temp) {
-				if (temp < 9) {
-					temp = 9
-				}
-				if (temp > 32) {
-					temp = 32
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_high': temp]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				} else if (latestThermostatMode.stringValue == 'cool') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				}
-			}
-			break;
-		default:
-			if (temp) {
-				if (temp < 51) {
-					temp = 51
-				}
-				if (temp > 89) {
-					temp = 89
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_high': fToC(temp)]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				} else if (latestThermostatMode.stringValue == 'cool') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				}
-			}
-			break;
-	}
-	poll()
-}
-
-def heatingSetpointUp(){
-	int newSetpoint = device.currentValue("heatingSetpoint") + 1
-	log.debug "Setting heat set point up to: ${newSetpoint}"
-	setHeatingSetpoint(newSetpoint)
-}
-
-def heatingSetpointDown(){
-	int newSetpoint = device.currentValue("heatingSetpoint") - 1
-	log.debug "Setting heat set point down to: ${newSetpoint}"
-	setHeatingSetpoint(newSetpoint)
-}
-
-def setFahrenheit() {
-	def temperatureUnit = "fahrenheit"
-	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
-	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
-	poll()
-}
-
-def setCelsius() {
-	def temperatureUnit = "celsius"
-	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
-	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
-	poll()
-}
-
-def off() {
-	setThermostatMode('off')
-}
-
-def heat() {
-	setThermostatMode('heat')
-}
-
-def emergencyHeat() {
-	setThermostatMode('heat')
-}
-
-def cool() {
-	setThermostatMode('cool')
-}
-
-def auto() {
-	setThermostatMode('range')
-}
-
-def setThermostatMode(mode) {
-	mode = mode == 'emergency heat'? 'heat' : mode
-
-	api('thermostat_mode', ['target_change_pending': true, 'target_temperature_type': mode]) {
-		mode = mode == 'range' ? 'auto' : mode
-		sendEvent(name: 'thermostatMode', value: mode)
-		poll()
-	}
-}
-
-def fanOn() {
-	setThermostatFanMode('on')
-}
-
-def fanAuto() {
-	setThermostatFanMode('auto')
-}
-
-def fanCirculate() {
-	setThermostatFanMode('circulate')
-}
-
-def setThermostatFanMode(mode) {
-	def modes = [
-		on: ['fan_mode': 'on'],
-		auto: ['fan_mode': 'auto'],
-		circulate: ['fan_mode': 'duty-cycle', 'fan_duty_cycle': 900]
-	]
-
-	api('fan_mode', modes.getAt(mode)) {
-		sendEvent(name: 'thermostatFanMode', value: mode)
-		poll()
-	}
-}
-
-def away() {
-	setPresence('away')
-	sendEvent(name: 'presence', value: 'not present')
-}
-
-def present() {
-	setPresence('present')
-	sendEvent(name: 'presence', value: 'present')
-}
-
-def setPresence(status) {
-	log.debug "Status: $status"
-	api('presence', ['away': status == 'away', 'away_timestamp': new Date().getTime(), 'away_setter': 0]) {
-		poll()
-	}
-}
-
-def poll() {
-	log.debug "Executing 'poll'"
-	api('status', []) {
-		data.device = it.data.device.getAt(settings.serial)
-		data.shared = it.data.shared.getAt(settings.serial)
-		data.structureId = it.data.link.getAt(settings.serial).structure.tokenize('.')[1]
-		data.structure = it.data.structure.getAt(data.structureId)
-
-		data.device.fan_mode = data.device.fan_mode == 'duty-cycle'? 'circulate' : data.device.fan_mode
-		data.structure.away = data.structure.away ? 'away' : 'present'
-
-		log.debug(data.shared)
-
-		def humidity = data.device.current_humidity
-		def temperatureType = data.shared.target_temperature_type
-		def fanMode = data.device.fan_mode
-		def heatingSetpoint = '--'
-		def coolingSetpoint = '--'
-
-		temperatureType = temperatureType == 'range' ? 'auto' : temperatureType
-
-		sendEvent(name: 'humidity', value: humidity)
-		sendEvent(name: 'thermostatFanMode', value: fanMode)
-		sendEvent(name: 'thermostatMode', value: temperatureType)
-
-		def temperatureUnit = device.latestValue('temperatureUnit')
-
-		switch (temperatureUnit) {
-			case "celsius":
-				def temperature = Math.round(data.shared.current_temperature)
-				def targetTemperature = Math.round(data.shared.target_temperature)
-
-				if (temperatureType == "cool") {
-					coolingSetpoint = targetTemperature
-				} else if (temperatureType == "heat") {
-					heatingSetpoint = targetTemperature
-				} else if (temperatureType == "auto") {
-					coolingSetpoint = Math.round(data.shared.target_temperature_high)
-					heatingSetpoint = Math.round(data.shared.target_temperature_low)
-				}
-
-				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
-				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-				break;
-			default:
-				def temperature = Math.round(cToF(data.shared.current_temperature))
-				def targetTemperature = Math.round(cToF(data.shared.target_temperature))
-
-				if (temperatureType == "cool") {
-					coolingSetpoint = targetTemperature
-				} else if (temperatureType == "heat") {
-					heatingSetpoint = targetTemperature
-				} else if (temperatureType == "auto") {
-					coolingSetpoint = Math.round(cToF(data.shared.target_temperature_high))
-					heatingSetpoint = Math.round(cToF(data.shared.target_temperature_low))
-				}
-
-				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
-				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-				break;
-			}
-
-		switch (device.latestValue('presence')) {
-			case "present":
-				if (data.structure.away == 'away') {
-					sendEvent(name: 'presence', value: 'not present')
-				}
-				break;
-			case "not present":
-				if (data.structure.away == 'present') {
-					sendEvent(name: 'presence', value: 'present')
-				}
-				break;
-		}
-
-		if (data.shared.hvac_ac_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "cooling")
-		} else if (data.shared.hvac_heater_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "heating")
-		} else if (data.shared.hvac_fan_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "fan only")
-		} else {
-			sendEvent(name: 'thermostatOperatingState', value: "idle")
-		}
-	}
-}
-
-def api(method, args = [], success = {}) {
-	if(!isLoggedIn()) {
-		log.debug "Need to login"
-		login(method, args, success)
-		return
-	}
-
-	def methods = [
-		'status': [uri: "/v2/mobile/${data.auth.user}", type: 'get'],
-		'fan_mode': [uri: "/v2/put/device.${settings.serial}", type: 'post'],
-		'thermostat_mode': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
-		'temperature': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
-		'presence': [uri: "/v2/put/structure.${data.structureId}", type: 'post']
-	]
-
-	def request = methods.getAt(method)
-
-	log.debug "Logged in"
-	doRequest(request.uri, args, request.type, success)
-}
-
-// Need to be logged in before this is called. So don't call this. Call api.
-def doRequest(uri, args, type, success) {
-	log.debug "Calling $type : $uri : $args"
-
-	if(uri.charAt(0) == '/') {
-		uri = "${data.auth.urls.transport_url}${uri}"
-	}
-
-	def params = [
-		uri: uri,
-		headers: [
-			'X-nl-protocol-version': 1,
-			'X-nl-user-id': data.auth.userid,
-			'Authorization': "Basic ${data.auth.access_token}"
-		],
-		body: args
-	]
-
-	def postRequest = { response ->
-		if (response.getStatus() == 302) {
-			def locations = response.getHeaders("Location")
-			def location = locations[0].getValue()
-			log.debug "redirecting to ${location}"
-			doRequest(location, args, type, success)
-		} else {
-			success.call(response)
-		}
-	}
-
-	try {
-		if (type == 'post') {
-			httpPostJson(params, postRequest)
-		} else if (type == 'get') {
-			httpGet(params, postRequest)
-		}
-	} catch (Throwable e) {
-		login()
-	}
-}
-
-def login(method = null, args = [], success = {}) {
-	def params = [
-		uri: 'https://home.nest.com/user/login',
-		body: [username: settings.username, password: settings.password]
-	]
-
-	httpPost(params) {response ->
-		data.auth = response.data
-		data.auth.expires_in = Date.parse('EEE, dd-MMM-yyyy HH:mm:ss z', response.data.expires_in).getTime()
-		log.debug data.auth
-
-		api(method, args, success)
-	}
-}
-
-def isLoggedIn() {
-	if(!data.auth) {
-		log.debug "No data.auth"
-		return false
-	}
-
-	def now = new Date().getTime();
-	return data.auth.expires_in > now
-}
-
-def cToF(temp) {
-	return (temp * 1.8 + 32).toDouble()
-}
-
-def fToC(temp) {
-	return ((temp - 32) / 1.8).toDouble()
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -326,6 +327,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

smartapps/ddspivey/smart-family-presence.src/smart-family-presence.groovy

@@ -0,0 +1,251 @@
+/**
+ *  Smart Family Presence
+ *
+ *  Copyright 2016 Darin Spivey
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Smart Family Presence",
+    namespace: "ddspivey",
+    author: "Darin Spivey",
+    description: "Smart arrival and departure push messages for couples/families that are traveling together.  When family members arrive and depart together, there is no need to send an individual push alert for each.",
+    category: "Family",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png")
+
+
+preferences {
+	section("Family Members") {
+		input "familySensors", "capability.presenceSensor", required: true, title: "Who's in your family?", multiple: true
+	}
+    section("Threshold") {
+    	paragraph "Set the time in seconds to allow for group arrival/departure"
+    	input "timeThreshold", "text", required: false, title: "Default is ${defaultThreshold}."
+    }
+	section("Smart departure alerts") {
+    	paragraph "When family members are home together, departure push alerts may not be necessary because most of the time, people are aware when their family members are leaving.  This feature will only send a push alert if the the entire family was previously apart."
+		paragraph "For example, when my wife and I are home together, I know when she's leaving; I don't need an alert for that.  If this feature is off, it will send a departure alert when she leaves."
+        input("smartDepartureFeature", "enum", title: "Default is On.", default:"On", options: ["On","Off"])
+	}
+    section("Verbose logging") {
+    	paragraph "For debugging, you may log all the app's decisions to the notifications log."
+    	input("logToNotifications", "enum", title: "Default is No.", default:"No", options: ["Yes", "No" ])
+	}
+}
+
+/****************************
+	Auto-getters and setters
+*****************************/
+
+def getDefaultThreshold() {
+	60
+}
+
+def setInProgress(value) {
+	state.inProgress = value
+}
+
+def getInProgress() {
+	state.inProgress == true
+}
+
+def getSmartDeparture() {
+	settings.smartDepartureFeature == 'On'
+}
+
+def getLogToNotifications() {
+	settings.logToNotifications == 'Yes'
+}
+
+def getThreshold() {
+	settings.timeThreshold ? settings.timeThreshold.toInteger() : defaultThreshold
+}
+
+/****************************
+ Framework methods
+*****************************/
+
+def installed() {
+	initialize()
+}
+ 
+def logit(msg) {
+	log.debug msg
+    if (logToNotifications) {
+    	sendNotificationEvent("[Smart Family Presense] $msg")
+    }
+}
+
+def updated() {
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+    subscribe(familySensors, "presence", presenceHandler)
+    log.debug("Subscribed ${familySensors.toString()} to presenceHandler")
+
+	/*
+    	Regular usage shows that, during certain cases such as the hub going offline,
+        or power outages, the app may lose state and not send alerts.  This will ensure that
+        it re-evaluates its state at least once per hour.
+    */
+    
+	logit "Scheduling a re-calibration at the top of every hour."
+    schedule("0 0 0/1 1/1 * ? *", reset)
+	reset()
+}
+
+/*****************************
+ Smart Family Presence methods
+******************************/
+
+def reset() {
+	if (inProgress) {
+    	logit "Skipping re-calibration, execution in progress!"
+        return
+    }    
+    logit "Re-calibrating."
+    state.baseCase = null
+    state.changedThisTime = []
+    wasApart()
+}
+
+def isFamilyTogether() {
+	// Check to see if the entire family has arrived/departed together
+
+	if (state.changedThisTime.size() == 0) {
+    	logit "No changes."
+        reset()
+    	return
+	}
+    
+	logit "People who changed presence: ${state.changedThisTime}"
+
+	def theirState = state.baseCase
+  	def notTogether = statusNotEquals(theirState)
+    
+  	if (notTogether) {
+    	// The family is not together, send an alert as normal
+        
+    	logit "${notTogether.join(", ")} is not with the rest of the family (who are $theirState)"
+        sendPushAlert()
+    }
+    else {
+    	/* 
+        	Special case - When everyone is gone, but they *previously* weren't together,
+        	then technically they were apart to begin with and are still apart upon leaving
+        */
+            
+        if (state.wasApart && theirState == 'not present') {
+           	logit "Family was previously apart and now all gone.  Alert."
+        	sendPushAlert()
+        }
+        else {    
+    		logit "OK!  Everyone has arrived/departed together.  The family is $theirState"
+        }
+    }
+    inProgress = false
+    reset()
+}
+
+def wasApart() {
+	// This is true if everyone is gone, or some were home
+	def allGone = statusEquals('not present') == familySensors
+    def someHome = statusEquals('present') != familySensors
+    if (allGone || someHome) {
+    	state.wasApart = true
+    }
+    else {
+    	state.wasApart = false
+    }
+}
+
+
+def presenceHandler(evt) {
+    def person = evt.displayName
+
+	logit "Presence Event: $person is $evt.value"
+    
+	if (! inProgress) {
+    	inProgress = true
+    	state.baseCase = evt.value
+        logit "First person sensed.  Checking for others to be $evt.value in ${threshold} seconds"
+        runIn(threshold, isFamilyTogether, [overwrite: false])
+	}
+    
+	if (! state.changedThisTime.contains(person)) {    
+    	state.changedThisTime.push person
+    }
+    else {
+    	// Special case - presence has changed within the threshold.  Remove this person.
+        state.changedThisTime = state.changedThisTime - person
+		logit "Ignoring flapping presence event for $person"
+    }
+}
+
+def statusEquals(status) {
+	if (status == null) return
+    
+	familySensors.findAll {
+        it.currentPresence == status
+    }
+}
+
+def statusNotEquals(status) {
+	if (status == null) return
+      
+	familySensors.findAll {
+        it.currentPresence != status 
+    }
+}
+
+def sendPushAlert() {
+	def baseCase = state.baseCase
+    def changedPeople = state.changedThisTime
+    
+    if (baseCase == 'not present' && state.wasApart == false && smartDeparture) {
+      logit "Not sending departure alert because smartDeparture is $smartDeparture"
+        return
+    }
+    
+	def statuses = [ 'present':[], 'not present':[] ]
+
+	for (sensor in familySensors) {
+    	def person = sensor.toString()       
+        if (changedPeople.contains(person)) {
+        	def currentState = sensor.currentPresence
+        	log.debug "$person is now $currentState"
+            statuses[currentState].push person
+        } 
+	}
+    logit "Statuses: $statuses"
+    
+    // Construct the message payload
+    
+    def pushMsg = ""    
+    def home = statuses.present
+    def notHome = statuses['not present']
+ 	String adVerb;
+   
+    if (home.size() > 0) {
+    	adVerb = home.size > 1 ? "have" : "has"
+    	pushMsg += "${home.join(", ")} $adVerb arrived $location.name. "
+    }
+    if (notHome.size() > 0) {
+    	adVerb = notHome.size > 1 ? "have" : "has"
+    	pushMsg += "${notHome.join(", ")} $adVerb left $location.name"
+    }    	
+    
+    sendPush pushMsg
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }