MSA-1448: Manages door equipped with both an open/close sensor and an actuated door lock. Sends push notification or text message if the door is left open or left unlocked for a preset amount of time. Also automatically locks the door after the door has been closed with a preset delay.

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -274,7 +274,6 @@ private Map makeTemperatureResult(value) {
         name: 'temperature',
         value: "" + value,
         descriptionText: "${linkText} is ${value}°${temperatureScale}",
-        unit: temperatureScale
     ]
 }
 

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -254,8 +254,7 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+		descriptionText: descriptionText
 	]
 }
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -327,6 +328,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		command "configureAfterSecure"
 
@@ -247,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -47,9 +47,6 @@ metadata {
 
         command "everywhereJoin"
         command "everywhereLeave"
-
-        command "forceOff"
-        command "forceOn"
     }
 
     /**
@@ -67,9 +64,9 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
         state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
-        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
         state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
@@ -143,22 +140,8 @@ metadata {
  * one place.
  *
  */
-def off() {
-    if (device.currentState("switch")?.value == "on") {
-        onAction("off")
-    }
-}
-def forceOff() {
-    onAction("off")
-}
-def on() {
-    if (device.currentState("switch")?.value == "off") {
-        onAction("on")
-    }
-}
-def forceOn() {
-    onAction("on")
-}
+def off() { onAction("off") }
+def on() { onAction("on") }
 def volup() { onAction("volup") }
 def voldown() { onAction("voldown") }
 def preset1() { onAction("1") }
@@ -257,11 +240,11 @@ def onAction(String user, data=null) {
     def actions = null
     switch (user) {
         case "on":
-            boseSetPowerState(true)
+            actions = boseSetPowerState(true)
             break
         case "off":
             boseSetNowPlaying(null, "STANDBY")
-            boseSetPowerState(false)
+            actions = boseSetPowerState(false)
             break
         case "volume":
             actions = boseSetVolume(data)

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -89,17 +89,14 @@ def parse(String description) {
 			log.debug "TEMP"
 			map.name = "temperature"
 			map.value = getTemperature(descMap.value)
-			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
 			map.value = getTemperature(descMap.value)
-			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
 			map.value = getTemperature(descMap.value)
-			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
@@ -172,7 +169,7 @@ def setHeatingSetpoint(degrees) {
 
 		def degreesInteger = Math.round(degrees)
 		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "heatingSetpoint", "value": degreesInteger, "unit": temperatureScale)
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
 
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
@@ -183,7 +180,7 @@ def setCoolingSetpoint(degrees) {
 	if (degrees != null) {
 		def degreesInteger = Math.round(degrees)
 		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "coolingSetpoint", "value": degreesInteger, "unit": temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
 	}

devicetypes/smartthings/cree-bulb.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,36 +0,0 @@
-# Connected Cree LED Bulb
-
-
-
-Works with: 
-
-* [Connected Cree LED Bulb](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Cree Connected LED Bulb Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,7 +23,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -86,13 +85,6 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
@@ -103,8 +95,5 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -152,11 +152,11 @@ def generateEvent(Map results) {
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
-				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
-				event << [value: sendValue, unit: temperatureScale, displayed: false]
+				event << [value: sendValue, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
@@ -234,9 +234,9 @@ void setHeatingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -271,9 +271,9 @@ void setCoolingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -287,14 +287,14 @@ void resumeProgram() {
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.resumeProgram(deviceId)) {
+	if (parent.resumeProgram(this, deviceId)) {
 		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
 		runIn(5, "poll")
 		log.debug "resumeProgram() is done"
 		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
 	} else {
 		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
-		log.error "Error resumeProgram() check parent.resumeProgram(deviceId)"
+		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
 	}
 
 }
@@ -406,7 +406,7 @@ def generateOperatingStateEvent(operatingState) {
 def off() {
 	log.debug "off"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode ("off", deviceId))
+	if (parent.setMode (this,"off", deviceId))
 		generateModeEvent("off")
 	else {
 		log.debug "Error setting new mode."
@@ -420,7 +420,7 @@ def off() {
 def heat() {
 	log.debug "heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode ("heat", deviceId))
+	if (parent.setMode (this,"heat", deviceId))
 		generateModeEvent("heat")
 	else {
 		log.debug "Error setting new mode."
@@ -438,7 +438,7 @@ def emergencyHeat() {
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode ("auxHeatOnly", deviceId))
+	if (parent.setMode (this,"auxHeatOnly", deviceId))
 		generateModeEvent("auxHeatOnly")
 	else {
 		log.debug "Error setting new mode."
@@ -452,7 +452,7 @@ def auxHeatOnly() {
 def cool() {
 	log.debug "cool"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode ("cool", deviceId))
+	if (parent.setMode (this,"cool", deviceId))
 		generateModeEvent("cool")
 	else {
 		log.debug "Error setting new mode."
@@ -466,7 +466,7 @@ def cool() {
 def auto() {
 	log.debug "auto"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode ("auto", deviceId))
+	if (parent.setMode (this,"auto", deviceId))
 		generateModeEvent("auto")
 	else {
 		log.debug "Error setting new mode."
@@ -489,7 +489,7 @@ def fanOn() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -510,7 +510,7 @@ def fanAuto() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -556,12 +556,12 @@ def generateSetpointEvent() {
 
 	if (mode == "heat") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
 
 	}
 	else if (mode == "cool") {
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
 
 	} else if (mode == "auto") {
 
@@ -573,7 +573,7 @@ def generateSetpointEvent() {
 
 	} else if (mode == "auxHeatOnly") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
 
 	}
 
@@ -608,7 +608,7 @@ void raiseSetpoint() {
 			targetvalue = maxCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -644,7 +644,7 @@ void lowerSetpoint() {
 			targetvalue = minCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -690,10 +690,10 @@ void alterSetpoint(temp) {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
 
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
 		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
 		log.error "Error alterSetpoint()"

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -682,7 +682,7 @@ def setHeatingSetpoint(degrees) {
 	def temperatureScale = getTemperatureScale()
 
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger, "unit":temperatureScale)
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
 
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
@@ -691,7 +691,7 @@ def setHeatingSetpoint(degrees) {
 
 def setCoolingSetpoint(degrees) {
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger, "unit":temperatureScale)
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
 

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -16,7 +16,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -44,7 +43,7 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -52,14 +51,10 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "reset", "refresh"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -80,78 +75,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	def value = [hue:20, saturation:2]
-	setAdjustedColor(value)
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -160,6 +195,22 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
 
 def verifyPercent(percent) {
     if (percent == null)
@@ -171,7 +222,3 @@ def verifyPercent(percent) {
         return false
     }
 }
-
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,13 +7,8 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		attribute "serialNumber", "string"
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
-		attribute "status", "string"
-		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
-		// This is also used in the Hue application as ID
-		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -22,23 +17,22 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
-	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
+			tileAttribute ("", key: "PRIMARY_CONTROL") {
+	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
 			}
+	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
+	            attributeState "default", label:'SN: ${currentValue}'
 			}
-		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'If removed, Hue lights will not work properly'
+        }
+		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
+			state "default", label:'SN: ${currentValue}'
 		}
-		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'ID: ${currentValue}'
-		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'IP: ${currentValue}'
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
+			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
+		details(["rich-control", "networkAddress"])
 	}
 }
 
@@ -62,7 +56,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-			log.trace "Parsing description"
+        	log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -72,13 +66,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
+                        if (parent.state.inBulbDiscovery)
+                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-					parent.hubVerification(device.hub.id, msg.body)
+                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -17,7 +17,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -44,16 +43,16 @@ metadata {
 			}
 		}
 
-    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-        state "colorTemperature", action:"color temperature.setColorTemperature"
-    }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
 
-    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        state "colorTemperature", label: 'WHITES'
-    }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -65,10 +64,6 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -89,86 +84,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	setColorTemperature(4000)
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-	    log.trace parent.setColorTemperature(this, value)
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
     } else {
-        log.warn "Invalid color temperature $value"
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -177,6 +204,23 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+
 def verifyPercent(percent) {
     if (percent == null)
         return false
@@ -187,7 +231,3 @@ def verifyPercent(percent) {
         return false
     }
 }
-
-def ping() {
-    log.trace "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-        capability "Health Check"
 
         command "refresh"
 	}
@@ -49,10 +48,6 @@ metadata {
     }
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -73,16 +68,20 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
+		sendEvent(name: "level", value: percent)
+		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }
@@ -92,7 +91,3 @@ void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }
-
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -15,7 +15,6 @@ metadata {
         capability "Color Temperature"
         capability "Switch"
         capability "Refresh"
-        capability "Health Check"
 
         command "refresh"
     }
@@ -37,12 +36,12 @@ metadata {
             }
         }
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
 
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: 'WHITES'
+            state "colorTemperature", label: '${currentValue} K'
         }
 
         standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -54,10 +53,6 @@ metadata {
     }
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"
@@ -78,16 +73,20 @@ def parse(description) {
 // handle commands
 void on() {
     log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
 }
 
 void off() {
     log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
-        log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
     } else {
         log.warn "$percent is not 0-100"
     }
@@ -96,7 +95,9 @@ void setLevel(percent) {
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        log.trace parent.setColorTemperature(this, value)
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
     } else {
         log.warn "Invalid color temperature"
     }
@@ -107,6 +108,3 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -147,8 +147,8 @@ private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
 
-	resultMap.name = 'motion'
-	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	result.name = 'motion'
+	result.value = zs.isAlarm2Set() ? 'active' : 'inactive'
 	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
 	return resultMap

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -91,7 +91,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +203,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
+    if(hueValue>360 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/*
+/* 
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-
+        
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-
+                        
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+		
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
+    if(hueValue>360 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-
+    
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/smartpower-outlet.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -1,38 +0,0 @@
-# SmartPower Outlet
-
-
-
-Works with: 
-
-* [Samsung SmartPower Outlet](https://shop.smartthings.com/#!/products/smartpower-outlet)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Actuator** - represents that a Device has commands
-* **Switch** - can detect state (possible values: on/off)
-* **Refresh** - _refresh()_ command for status updates
-* **Power Meter** - detects power meter for device in either w or kw.
-* **Health Check** - indicates ability to get device health notifications
-* **Sensor** - detects sensor events
-
-## Device Health
-
-A Category C1 smart power outlet with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
-for the different models:
-* [SmartPower Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201084854-SmartPower-Outlet)
-* [Samsung SmartThings Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957620)

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastOnOff == null){
+				state.lastOnOff = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+			}
+			state.lastOnOff = now()
 		}
 	}
 	else {
@@ -117,10 +123,19 @@ def on() {
 	zigbee.on()
 }
 /**
- * PING is used by Device-Watch in attempt to reach the Device
+ * PING is used by Device-Watch in attempt to reach the Outlet
  * */
 def ping() {
-	return zigbee.onOffRefresh()
+
+	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
+	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
+		state.lastOnOff = null
+		return zigbee.onOffRefresh()
+	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
+		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -128,10 +143,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
+	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -1,44 +0,0 @@
-# Smartsense Moisture Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Moisture Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-water-leak-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - defines device measures current temperature
-* **Water Sensor** - can detect presence of water (dry or wet)
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 moisture sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
-
-## Battery Specification
-
-One CR2 3V battery required.
-
-## Troubleshooting
-
-If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different sensors from SmartThings can be found in the following links
-for the different models:
-* [SmartSense Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202847044-SmartSense-Moisture-Sensor)
-* [Samsung SmartThings Water Leak Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957630)
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting: Samsung SmartThings Water Leak Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-		capability "Sensor"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -226,8 +226,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -254,8 +252,7 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
+        translatable: true
 	]
 }
 
@@ -274,13 +271,6 @@ private Map getMoistureResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -292,19 +282,23 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -9,8 +9,7 @@ Works with:
 ## Table of contents
 
 * [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
+* [Health]($health)
 
 ## Capabilities
 
@@ -22,24 +21,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+A Category C2 motion sensor that has 120min check-in interval
+
+
 
-## Battery Specification
 
-One CR2477 (for Samsung SmartThings Motion Sensor) / CR123A (SmartSense Motion Sensor) 3V battery is required.
 
-## Troubleshooting
 
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [SmartSense Motion Sensor (original model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903280-SmartSense-Motion-Sensor-original-model-)
-* [SmartSense Motion Sensor (2014 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203077520-SmartSense-Motion-Sensor-2014-model-)
-* [Samsung SmartThings Motion Sensor (2015 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957580-Samsung-SmartThings-Motion-Sensor-2015-model-)
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting: Samsung SmartThings Motion Sensor is stuck showing "Motion Detected" or "No Motion"](https://support.smartthings.com/hc/en-us/articles/200961130-Troubleshooting-Samsung-SmartThings-Motion-Sensor-is-stuck-showing-Motion-Detected-or-No-Motion-)
-* [Troubleshooting: Samsung SmartThings Motion Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -241,8 +241,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -269,8 +267,7 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
+        translatable: true
 	]
 }
 
@@ -285,13 +282,6 @@ private Map getMotionResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -303,19 +293,24 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
+	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -206,8 +206,6 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
@@ -228,8 +226,7 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+		descriptionText: descriptionText
 	]
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -1,45 +0,0 @@
-# Smartsense Multi Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Multi Sensor](https://shop.smartthings.com/#!/products/smartsense-multi)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Three Axis** - monitors the state of a single axis
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Battery** - defines device uses a battery
-* **Sensor** - detects sensor events
-* **Contact Sensor** - can detect contact (possible values: open,closed)
-* **Acceleration Sensor** - allows for acceleration detection.
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - defines device measures current temperature
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 multi sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
-
-## Battery Specification
-
-One CR2450 (for Samsung SmartThings Multipurpose Sensor) battery / Two AAAA (for SmartSense Multi Sensor) batteries required.
-
-## Troubleshooting
-
-If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting: Samsung SmartThings Multipurpose Sensor is stuck on "open" or "closed"](https://support.smartthings.com/hc/en-us/articles/200955940-Troubleshooting-Samsung-SmartThings-Multipurpose-Sensor-is-stuck-on-open-or-closed-)
-* [Troubleshooting: Temperature reading for the Samsung SmartThings Multipurpose Sensor is off](https://support.smartthings.com/hc/en-us/articles/200756845-Troubleshooting-Temperature-reading-for-the-Samsung-SmartThings-Multipurpose-Sensor-is-off)
-* [Troubleshooting: Samsung SmartThings Multipurpose Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -228,9 +228,9 @@ private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
 
-			if (garageSensor != "Yes"){
+	if(garageSensor !=  "Yes") {
 		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-			}
+	}
 
 	return resultMap
 }
@@ -306,8 +306,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -328,11 +326,10 @@ private Map getTemperatureResult(value) {
 			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
+	name: 'temperature',
+	value: value,
+	descriptionText: descriptionText,
+    translatable: true
 	]
 }
 
@@ -367,13 +364,6 @@ private getAccelerationResult(numValue) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -401,16 +391,13 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting"
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	def configCmds = enrollResponse() +
 			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300) +
+			zigbee.temperatureConfig() +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,8 +206,6 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-	        if (roundedPct <= 0)
-		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
@@ -225,10 +223,9 @@ def getTemperature(value) {
 		}
 		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 		return [
-			name: 'temperature',
-			value: value,
-			descriptionText: descriptionText,
-			unit: temperatureScale
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
 		]
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -1,41 +0,0 @@
-# Smartsense Open/Closed Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Open/Closed Sensor](https://shop.smartthings.com/#!/packs/smartsense-open-closed-sensor/)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Battery** - defines device uses a battery
-* **Contact Sensor** - can detect contact (possible values: open,closed)
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - defines device measures current temperature
-* **Health Check** - indicates ability to get device health notifications
-* **Sensor** - detects sensor events
-
-## Device Health
-
-A Category C2 open/closed sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
-
-## Battery Specification
-
-One CR2 3V battery required.
-
-## Troubleshooting
-
-If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [SmartSense Open/Closed Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202836844-SmartSense-Open-Closed-Sensor)

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -200,8 +200,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -221,8 +219,7 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+		descriptionText: descriptionText
 	]
 }
 
@@ -237,13 +234,6 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -255,19 +245,23 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -1,41 +0,0 @@
-# SmartSense Temp/Humidity Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartSense Temp/Humidity Sensor](https://shop.smartthings.com/#!/products/smartsense-temp-humidity-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Battery** - defines device uses a battery
-* **Relative Humidity Measurement** - defines device measures relative humidity
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - defines device measures current temperature
-* **Health Check** - indicates ability to get device health notifications
-* **Sensor** - detects sensor events
-
-## Device Health
-
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
-
-## Battery Specification
-
-One CR2 battery is required.
-
-## Troubleshooting
-
-If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203040294)

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -207,8 +207,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -228,8 +226,7 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+		descriptionText: descriptionText
 	]
 }
 
@@ -242,13 +239,6 @@ private Map getHumidityResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -264,19 +254,23 @@ def refresh()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
-	def humidityConfigCmds = [
+	def configCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -213,8 +213,7 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+		descriptionText: descriptionText
 	]
 }
 

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -19,7 +19,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -54,10 +53,7 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        if (event.name=="level" && event.value==0) {}
-        else {
-            sendEvent(event)
-        }
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -76,12 +72,6 @@ def on() {
 def setLevel(value) {
     zigbee.setLevel(value)
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
@@ -89,8 +79,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -27,10 +27,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
-
-        attribute "colorName", "string"
-        command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
@@ -58,15 +54,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -82,16 +78,10 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
-    if (event) {
-        log.debug event
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -99,12 +89,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
                 def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
         else {
@@ -120,47 +110,20 @@ def on() {
 def off() {
     zigbee.off()
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
-    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}
-
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Actuator"
         capability "Color Temperature"
         capability "Configuration"
-        capability "Health Check"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -36,7 +35,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -51,6 +49,9 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -60,12 +61,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -74,13 +75,7 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -100,23 +95,13 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
-
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

smartapps/airoscar/door-lock-manager.src/door-lock-manager.groovy

@@ -0,0 +1,146 @@
+
+definition(
+    name: "Door & Lock Manager",
+    namespace: "airoscar",
+    author: "Oscar Chen",
+    description: "Manages door and lock behaviors. Send push notification or text message if the door is left open or if the lock is left unlocked for a preset amount of time; as well as automatically locking the lock with a preset delay after the door has been closed.",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage%402x.png"
+)
+
+preferences {
+
+	section("Monitor this door") {
+		input "contact", "capability.contactSensor"
+    }
+    section ("Monitor this lock") {
+        input "lock", "capability.lock"
+	}
+	section("And notify me if it's open for more than this many minutes (default: 3)") {
+		input "openThreshold", "number", description: "Number of minutes", required: false
+	}
+    section("Delay between notifications (default 10 minutes") {
+        input "frequency", "number", title: "Number of minutes", description: "", required: false
+    }
+    section("Automatically lock this door after this many minutes (default: 0.5)") {
+    	input "lockDelay", "number", title: "Number of minutes", required: false
+    }
+	section("Via text message at this number (or via push notification if not specified") {
+        input("recipients", "contact", title: "Send notifications to") {
+            input "phone", "phone", title: "Phone number (optional)", required: false
+        }
+	}
+}
+
+def installed() {
+	log.trace "installed()"
+	subscribe()
+}
+
+def updated() {
+	log.trace "updated()"
+	unsubscribe()
+	subscribe()
+}
+
+def subscribe() {
+	subscribe(contact, "contact", doorHandler)
+    subscribe(lock, "lock", lockHandler)
+}
+
+def lockHandler(evt)
+{
+	log.trace "LockHandler($evt.name: $evt.value)"
+    def t0 = now()
+    def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 180 //unlocked notification delay
+    runIn(delay, doorOpenTooLong, [overwrite: false])
+    log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
+}
+
+def doorHandler(evt)
+{
+	log.trace "doorHandler($evt.name: $evt.value)"
+	def t0 = now()
+	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 180 //door open notification delay
+    def delay2 = (lockDelay != null && lockDelay != "") ? lockDelay * 60 : 30 // auto lock delay
+    runIn(delay2, autoLock, [overwrite: false])
+	runIn(delay, doorOpenTooLong, [overwrite: false])
+	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
+}
+
+def autoLock() {
+	def contactState = contact.currentState("contact")
+    def lockState = lock.currentState("lock")
+    def elapsed = now() - contactState.rawDateCreated.time
+	def autoLockDelay = ((delay2 != null && delay2 != "") ? delay2 * 60000 : 60000) - 1000
+	
+    if (elapsed >= threshold) {
+    	if (contactState.value == "closed" && lockState.value == "unlocked") {
+    		lock.lock()
+       	}
+    }
+}
+
+
+def doorOpenTooLong() {
+	def contactState = contact.currentState("contact")
+    def lockState = lock.currentState("lock")
+    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600 //notification frequency
+	
+	if (contactState.value == "open") {
+    
+		def elapsed = now() - contactState.rawDateCreated.time
+		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+        
+		if (elapsed >= threshold) {
+			log.debug "contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+			sendMessage()
+            runIn(freq, doorOpenTooLong, [overwrite: false])
+		} else {
+			log.debug "contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+		}
+        
+	} else if (lockState.value =="unlocked") {
+    
+    	def elapsed = now() - contactState.rawDateCreated.time
+        def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+        
+        if (elapsed >= threshold) {
+        	log.debug "lock has stayed unlocked long enough since last check ($elapsed ms): calling sendMessage()"
+            sendMessage()
+            runIn(freq, doorOpenTooLong, [overwrite: false])
+        } else {
+        	log.debug "lock has not stayed unlocked long enough since last check ($elapsed ms): doing nothing"
+        }
+        
+    } else {
+		log.warn "doing nothing"
+	}
+}
+
+void sendMessage()
+{
+	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 3
+	def msg = ""
+
+    if (contact.currentState("contact").value == "open") {
+    	msg = "${contact.displayName} has been left open for ${minutes} minutes."
+    } else if (lock.currentState("lock").value == "unlocked") {
+    	msg = "${contact.displayName} is closed but ${lock.displayName} has been left unlocked for ${minutes} minutes."
+    } else {
+    	msg = "No message"
+    }
+
+	log.info msg
+    if (location.contactBookEnabled) {
+        sendNotificationToContacts(msg, recipients)
+    }
+    else {
+        if (phone) {
+            sendSms phone, msg
+        } else {
+            sendPush msg
+        }
+    }
+}

smartapps/juano2310/jawbone-button-notifier.src/jawbone-button-notifier.groovy

@@ -62,7 +62,7 @@ def initialize() {
 }
 
 def sendit(evt) {
-	log.debug "$evt.value: $evt"
+	log.debug "$evt.value: $evt, $settings"
 	sendMessage()
 }
 
@@ -80,6 +80,6 @@ def sendMessage() {
         sendSms phone3, msg
     }
     if (!phone1 && !phone2 && !phone3) {
-    	sendPush msg
+    	sendPush msg    
     }
 }

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on switch when vibration is sensed",
+    description: "Turn on Monitor when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When vibration is sensed...") {
+	section("When the keyboard is used...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on switch...") {
+section("Turn on/off a light...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,3 +47,5 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
+
+

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -66,7 +66,7 @@ def authPage() {
 	// get rid of next button until the user is actually auth'd
 	if (!oauthTokenProvided) {
 		return dynamicPage(name: "auth", title: "Login", nextPage: "", uninstall:uninstallAllowed) {
-			section() {
+			section(){
 				paragraph "Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button."
 				href url:redirectUrl, style:"embedded", required:true, title:"ecobee", description:description
 			}
@@ -76,7 +76,7 @@ def authPage() {
 		log.debug "thermostat list: $stats"
 		log.debug "sensor list: ${sensorsDiscovered()}"
 		return dynamicPage(name: "auth", title: "Select Your Thermostats", uninstall: true) {
-			section("") {
+			section(""){
 				paragraph "Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings."
 				input(name: "thermostats", title:"", type: "enum", required:true, multiple:true, description: "Tap to choose", metadata:[values:stats])
 			}
@@ -84,7 +84,7 @@ def authPage() {
 			def options = sensorsDiscovered() ?: []
 			def numFound = options.size() ?: 0
 			if (numFound > 0)  {
-				section("") {
+				section(""){
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
 					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
@@ -115,12 +115,13 @@ def callback() {
 	def code = params.code
 	def oauthState = params.state
 
-	if (oauthState == atomicState.oauthInitState) {
+	if (oauthState == atomicState.oauthInitState){
+
 		def tokenParams = [
-			grant_type: "authorization_code",
-			code      : code,
-			client_id : smartThingsClientId,
-			redirect_uri: callbackUrl
+				grant_type: "authorization_code",
+				code      : code,
+				client_id : smartThingsClientId,
+				redirect_uri: callbackUrl
 		]
 
 		def tokenUrl = "https://www.ecobee.com/home/token?${toQueryString(tokenParams)}"
@@ -128,6 +129,9 @@ def callback() {
 		httpPost(uri: tokenUrl) { resp ->
 			atomicState.refreshToken = resp.data.refresh_token
 			atomicState.authToken = resp.data.access_token
+			log.debug "swapped token: $resp.data"
+			log.debug "atomicState.refreshToken: ${atomicState.refreshToken}"
+			log.debug "atomicState.authToken: ${atomicState.authToken}"
 		}
 
 		if (atomicState.authToken) {
@@ -144,8 +148,8 @@ def callback() {
 
 def success() {
 	def message = """
-        <p>Your ecobee Account is now connected to SmartThings!</p>
-        <p>Click 'Done' to finish setup.</p>
+    <p>Your ecobee Account is now connected to SmartThings!</p>
+    <p>Click 'Done' to finish setup.</p>
     """
 	connectionStatus(message)
 }
@@ -167,63 +171,64 @@ def connectionStatus(message, redirectUrl = null) {
 	}
 
 	def html = """
-        <!DOCTYPE html>
-        <html>
-            <head>
-                <meta name="viewport" content="width=640">
-                <title>Ecobee & SmartThings connection</title>
-                <style type="text/css">
-                    @font-face {
-                        font-family: 'Swiss 721 W01 Thin';
-                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                        font-weight: normal;
-                        font-style: normal;
-                    }
-                    @font-face {
-                        font-family: 'Swiss 721 W01 Light';
-                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                        font-weight: normal;
-                        font-style: normal;
-                    }
-                    .container {
-                        width: 90%;
-                        padding: 4%;
-                        text-align: center;
-                    }
-                    img {
-                        vertical-align: middle;
-                    }
-                    p {
-                        font-size: 2.2em;
-                        font-family: 'Swiss 721 W01 Thin';
-                        text-align: center;
-                        color: #666666;
-                        padding: 0 40px;
-                        margin-bottom: 0;
-                    }
-                    span {
-                        font-family: 'Swiss 721 W01 Light';
-                    }
-                </style>
-            </head>
-        <body>
-            <div class="container">
+<!DOCTYPE html>
+<html>
+<head>
+<meta name="viewport" content="width=640">
+<title>Ecobee & SmartThings connection</title>
+<style type="text/css">
+        @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+        }
+        @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+        }
+        .container {
+                width: 90%;
+                padding: 4%;
+                /*background: #eee;*/
+                text-align: center;
+        }
+        img {
+                vertical-align: middle;
+        }
+        p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                padding: 0 40px;
+                margin-bottom: 0;
+        }
+        span {
+                font-family: 'Swiss 721 W01 Light';
+        }
+</style>
+</head>
+<body>
+        <div class="container">
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/ecobee%402x.png" alt="ecobee icon" />
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
                 ${message}
-            </div>
-        </body>
-    </html>
-    """
+        </div>
+</body>
+</html>
+"""
 
 	render contentType: 'text/html', data: html
 }
@@ -232,26 +237,19 @@ def getEcobeeThermostats() {
 	log.debug "getting device list"
 	atomicState.remoteSensors = []
 
-    def bodyParams = [
-        selection: [
-            selectionType: "registered",
-            selectionMatch: "",
-            includeRuntime: true,
-            includeSensors: true
-        ]
-    ]
+	def requestBody = '{"selection":{"selectionType":"registered","selectionMatch":"","includeRuntime":true,"includeSensors":true}}'
+
 	def deviceListParams = [
-		uri: apiEndpoint,
-		path: "/1/thermostat",
-		headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        // TODO - the query string below is not consistent with the Ecobee docs:
-        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
-		query: [format: 'json', body: toJson(bodyParams)]
+			uri: apiEndpoint,
+			path: "/1/thermostat",
+			headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
+			query: [format: 'json', body: requestBody]
 	]
 
 	def stats = [:]
 	try {
 		httpGet(deviceListParams) { resp ->
+
 			if (resp.status == 200) {
 				resp.data.thermostatList.each { stat ->
 					atomicState.remoteSensors = atomicState.remoteSensors == null ? stat.remoteSensors : atomicState.remoteSensors <<  stat.remoteSensors
@@ -291,10 +289,9 @@ Map sensorsDiscovered() {
 }
 
 def getThermostatDisplayName(stat) {
-    if(stat?.name) {
-        return stat.name.toString()
-    }
-    return (getThermostatTypeName(stat) + " (${stat.identifier})").toString()
+	if(stat?.name)
+		return stat.name.toString()
+	return (getThermostatTypeName(stat) + " (${stat.identifier})").toString()
 }
 
 def getThermostatTypeName(stat) {
@@ -313,6 +310,7 @@ def updated() {
 }
 
 def initialize() {
+
 	log.debug "initialize"
 	def devices = thermostats.collect { dni ->
 		def d = getChildDevice(dni)
@@ -352,6 +350,8 @@ def initialize() {
 	log.warn "delete: ${delete}, deleting ${delete.size()} thermostats"
 	delete.each { deleteChildDevice(it.deviceNetworkId) } //inherits from SmartApp (data-management)
 
+	atomicState.thermostatData = [:] //reset Map to store thermostat data
+
 	//send activity feeds to tell that device is connected
 	def notificationMessage = "is connected to SmartThings"
 	sendActivityFeeds(notificationMessage)
@@ -381,41 +381,75 @@ def pollHandler() {
 }
 
 def pollChildren(child = null) {
-    def thermostatIdsString = getChildDeviceIdsString()
-    log.debug "polling children: $thermostatIdsString"
-
-    def requestBody = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: thermostatIdsString,
-            includeExtendedRuntime: true,
-            includeSettings: true,
-            includeRuntime: true,
-            includeSensors: true
-        ]
-    ]
+	def thermostatIdsString = getChildDeviceIdsString()
+	log.debug "polling children: $thermostatIdsString"
+	def data = ""
 
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeExtendedRuntime":"true","includeSettings":"true","includeRuntime":"true","includeSensors":true}}'
 	def result = false
 
 	def pollParams = [
-        uri: apiEndpoint,
-        path: "/1/thermostat",
-        headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        // TODO - the query string below is not consistent with the Ecobee docs:
-        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
-        query: [format: 'json', body: toJson(requestBody)]
-    ]
+			uri: apiEndpoint,
+			path: "/1/thermostat",
+			headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
+			query: [format: 'json', body: jsonRequestBody]
+	]
 
 	try{
 		httpGet(pollParams) { resp ->
 			if(resp.status == 200) {
-                log.debug "poll results returned resp.data ${resp.data}"
-                atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
-                updateSensorData()
-                storeThermostatData(resp.data.thermostatList)
-                result = true
-                log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
-            }
+				log.debug "poll results returned resp.data ${resp.data}"
+				atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
+				atomicState.thermostatData = resp.data
+				updateSensorData()
+				atomicState.thermostats = resp.data.thermostatList.inject([:]) { collector, stat ->
+					def dni = [ app.id, stat.identifier ].join('.')
+
+					log.debug "updating dni $dni"
+
+					data = [
+							coolMode: (stat.settings.coolStages > 0),
+							heatMode: (stat.settings.heatStages > 0),
+							deviceTemperatureUnit: stat.settings.useCelsius,
+							minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
+							maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
+							minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
+							maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
+							autoMode: stat.settings.autoHeatCoolFeatureEnabled,
+							auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
+							temperature: (stat.runtime.actualTemperature / 10),
+							heatingSetpoint: stat.runtime.desiredHeat / 10,
+							coolingSetpoint: stat.runtime.desiredCool / 10,
+							thermostatMode: stat.settings.hvacMode,
+							humidity: stat.runtime.actualHumidity,
+							thermostatFanMode: stat.runtime.desiredFanMode
+					]
+
+					if (location.temperatureScale == "F")
+					{
+						data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
+						data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
+						data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
+						data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
+						data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
+						data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
+						data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
+
+					}
+
+					if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
+						data["deviceTemperatureUnit"] = "F"
+
+					} else {
+						data["deviceTemperatureUnit"] = "C"
+					}
+
+					collector[dni] = [data:data]
+					return collector
+				}
+				result = true
+				log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
+			}
 		}
 	} catch (groovyx.net.http.HttpResponseException e) {
 		log.trace "Exception polling children: " + e.response.data.status
@@ -429,12 +463,13 @@ def pollChildren(child = null) {
 }
 
 // Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild() {
+def pollChild(){
+
 	def devices = getChildDevices()
 
-	if (pollChildren()) {
+	if (pollChildren()){
 		devices.each { child ->
-			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")) {
+			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
 				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
 					def tData = atomicState.thermostats[child.device.deviceNetworkId]
 					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
@@ -457,38 +492,36 @@ void poll() {
 }
 
 def availableModes(child) {
+
 	debugEvent ("atomicState.thermostats = ${atomicState.thermostats}")
+
 	debugEvent ("Child DNI = ${child.device.deviceNetworkId}")
 
 	def tData = atomicState.thermostats[child.device.deviceNetworkId]
 
 	debugEvent("Data = ${tData}")
 
-	if(!tData) {
+	if(!tData)
+	{
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
+
 		return null
 	}
 
 	def modes = ["off"]
 
-    if (tData.data.heatMode) {
-        modes.add("heat")
-    }
-    if (tData.data.coolMode) {
-        modes.add("cool")
-    }
-    if (tData.data.autoMode) {
-        modes.add("auto")
-    }
-    if (tData.data.auxHeatMode) {
-        modes.add("auxHeatOnly")
-    }
+	if (tData.data.heatMode) modes.add("heat")
+	if (tData.data.coolMode) modes.add("cool")
+	if (tData.data.autoMode) modes.add("auto")
+	if (tData.data.auxHeatMode) modes.add("auxHeatOnly")
+
+	modes
 
-    return modes
 }
 
 def currentMode(child) {
 	debugEvent ("atomicState.Thermos = ${atomicState.thermostats}")
+
 	debugEvent ("Child DNI = ${child.device.deviceNetworkId}")
 
 	def tData = atomicState.thermostats[child.device.deviceNetworkId]
@@ -497,11 +530,14 @@ def currentMode(child) {
 
 	if(!tData) {
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
+
+
 		return null
 	}
 
 	def mode = tData.data.thermostatMode
-	return mode
+
+	mode
 }
 
 def updateSensorData() {
@@ -522,12 +558,12 @@ def updateSensorData() {
 							}
 
 						}
+
 					} else if (it.type == "occupancy") {
-						if(it.value == "true") {
-                            occupancy = "active"
-                        } else {
+						if(it.value == "true")
+							occupancy = "active"
+						else
 							occupancy = "inactive"
-                        }
 					}
 				}
 				def dni = "ecobee_sensor-"+ it?.id + "-" + it?.code
@@ -546,7 +582,7 @@ def getChildDeviceIdsString() {
 }
 
 def toJson(Map m) {
-    return groovy.json.JsonOutput.toJson(m)
+	return new org.json.JSONObject(m).toString()
 }
 
 def toQueryString(Map m) {
@@ -559,24 +595,54 @@ private refreshAuthToken() {
 	if(!atomicState.refreshToken) {
 		log.warn "Can not refresh OAuth token since there is no refreshToken stored"
 	} else {
+
 		def refreshParams = [
-			method: 'POST',
-			uri   : apiEndpoint,
-			path  : "/token",
-			query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
+				method: 'POST',
+				uri   : apiEndpoint,
+				path  : "/token",
+				query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
 		]
 
+		log.debug refreshParams
+
 		def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
 		//changed to httpPost
 		try {
 			def jsonMap
 			httpPost(refreshParams) { resp ->
+
 				if(resp.status == 200) {
 					log.debug "Token refreshed...calling saved RestAction now!"
+
 					debugEvent("Token refreshed ... calling saved RestAction now!")
-					saveTokenAndResumeAction(resp.data)
-			    }
-            }
+
+					log.debug resp
+
+					jsonMap = resp.data
+
+					if(resp.data) {
+
+						log.debug resp.data
+						debugEvent("Response = ${resp.data}")
+
+						atomicState.refreshToken = resp?.data?.refresh_token
+						atomicState.authToken = resp?.data?.access_token
+
+						debugEvent("Refresh Token = ${atomicState.refreshToken}")
+						debugEvent("OAUTH Token = ${atomicState.authToken}")
+
+						if(atomicState.action && atomicState.action != "") {
+							log.debug "Executing next action: ${atomicState.action}"
+
+							"${atomicState.action}"()
+
+							atomicState.action = ""
+						}
+
+					}
+					atomicState.action = ""
+				}
+			}
 		} catch (groovyx.net.http.HttpResponseException e) {
 			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
 			def reAttemptPeriod = 300 // in sec
@@ -596,220 +662,118 @@ private refreshAuthToken() {
 	}
 }
 
-/**
- * Saves the refresh and auth token from the passed-in JSON object,
- * and invokes any previously executing action that did not complete due to
- * an expired token.
- *
- * @param json - an object representing the parsed JSON response from Ecobee
- */
-private void saveTokenAndResumeAction(json) {
-    log.debug "token response json: $json"
-    if (json) {
-        debugEvent("Response = $json")
-        atomicState.refreshToken = json?.refresh_token
-        atomicState.authToken = json?.access_token
-        if (atomicState.action) {
-            log.debug "got refresh token, executing next action: ${atomicState.action}"
-            "${atomicState.action}"()
-        }
-    } else {
-        log.warn "did not get response body from refresh token response"
-    }
-    atomicState.action = ""
+def resumeProgram(child, deviceId) {
+
+
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}]}'
+	def result = sendJson(jsonRequestBody)
+	return result
 }
 
-/**
- * Executes the resume program command on the Ecobee thermostat
- * @param deviceId - the ID of the device
- *
- * @retrun true if the command was successful, false otherwise.
- */
-boolean resumeProgram(deviceId) {
-    def payload = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: deviceId,
-            includeRuntime: true
-        ],
-        functions: [
-            [
-                type: "resumeProgram"
-            ]
-        ]
-    ]
-    return sendCommandToEcobee(payload)
+def setHold(child, heating, cooling, deviceId, sendHoldType) {
+
+	int h = heating * 10
+	int c = cooling * 10
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
+
+	def result = sendJson(child, jsonRequestBody)
+	return result
 }
 
-/**
- * Executes the set hold command on the Ecobee thermostat
- * @param heating - The heating temperature to set in fahrenheit
- * @param cooling - the cooling temperature to set in fahrenheit
- * @param deviceId - the ID of the device
- * @param sendHoldType - the hold type to execute
- *
- * @return true if the command was successful, false otherwise
- */
-boolean setHold(heating, cooling, deviceId, sendHoldType) {
-    // Ecobee requires that temp values be in fahrenheit multiplied by 10.
-    int h = heating * 10
-    int c = cooling * 10
+def setFanMode(child, heating, cooling, deviceId, sendHoldType, fanMode) {
 
-    def payload = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: deviceId,
-            includeRuntime: true
-        ],
-        functions: [
-            [
-                type: "setHold",
-                params: [
-                    coolHoldTemp: c,
-                    heatHoldTemp: h,
-                    holdType: sendHoldType
-                ]
-            ]
-        ]
-    ]
+	int h = heating * 10
+	int c = cooling * 10
 
-    return sendCommandToEcobee(payload)
+
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+', "fan": '+fanMode+' } } ]}'
+	def result = sendJson(child, jsonRequestBody)
+	return result
 }
 
-/**
- * Executes the set fan mode command on the Ecobee thermostat
- * @param heating - The heating temperature to set in fahrenheit
- * @param cooling - the cooling temperature to set in fahrenheit
- * @param deviceId - the ID of the device
- * @param sendHoldType - the hold type to execute
- * @param fanMode - the fan mode to set to
- *
- * @return true if the command was successful, false otherwise
- */
-boolean setFanMode(heating, cooling, deviceId, sendHoldType, fanMode) {
-    // Ecobee requires that temp values be in fahrenheit multiplied by 10.
-    int h = heating * 10
-    int c = cooling * 10
+def setMode(child, mode, deviceId) {
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"thermostat": {"settings":{"hvacMode":"'+"${mode}"+'"}}}'
 
-    def payload = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: deviceId,
-            includeRuntime: true
-        ],
-        functions: [
-            [
-                type: "setHold",
-                params: [
-                    coolHoldTemp: c,
-                    heatHoldTemp: h,
-                    holdType: sendHoldType,
-                    fan: fanMode
-                ]
-            ]
-        ]
-    ]
-
-	return sendCommandToEcobee(payload)
+	def result = sendJson(jsonRequestBody)
+	return result
 }
 
-/**
- * Sets the mode of the Ecobee thermostat
- * @param mode - the mode to set to
- * @param deviceId - the ID of the device
- *
- * @return true if the command was successful, false otherwise
- */
-boolean setMode(mode, deviceId) {
-    def payload = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: deviceId,
-            includeRuntime: true
-        ],
-        thermostat: [
-            settings: [
-                hvacMode: mode
-            ]
-        ]
-    ]
-	return sendCommandToEcobee(payload)
-}
+def sendJson(child = null, String jsonBody) {
 
-/**
- * Makes a request to the Ecobee API to actuate the thermostat.
- * Used by command methods to send commands to Ecobee.
- *
- * @param bodyParams - a map of request parameters to send to Ecobee.
- *
- * @return true if the command was accepted by Ecobee without error, false otherwise.
- */
-private boolean sendCommandToEcobee(Map bodyParams) {
-	def isSuccess = false
+	def returnStatus = false
 	def cmdParams = [
-		uri: apiEndpoint,
-		path: "/1/thermostat",
-		headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-		body: toJson(bodyParams)
+			uri: apiEndpoint,
+			path: "/1/thermostat",
+			headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+			body: jsonBody
 	]
 
 	try{
-        httpPost(cmdParams) { resp ->
-            if(resp.status == 200) {
-                log.debug "updated ${resp.data}"
-                def returnStatus = resp.data.status.code
-                if (returnStatus == 0) {
-                    log.debug "Successful call to ecobee API."
-                    isSuccess = true
-                } else {
-                    log.debug "Error return code = ${returnStatus}"
-                    debugEvent("Error return code = ${returnStatus}")
-                }
-            }
-        }
+		httpPost(cmdParams) { resp ->
+
+			if(resp.status == 200) {
+
+				log.debug "updated ${resp.data}"
+				returnStatus = resp.data.status.code
+				if (resp.data.status.code == 0)
+					log.debug "Successful call to ecobee API."
+				else {
+					log.debug "Error return code = ${resp.data.status.code}"
+					debugEvent("Error return code = ${resp.data.status.code}")
+				}
+			}
+		}
 	} catch (groovyx.net.http.HttpResponseException e) {
         log.trace "Exception Sending Json: " + e.response.data.status
         debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
         if (e.response.data.status.code == 14) {
-            // TODO - figure out why we're setting the next action to be pollChildren
-            // after refreshing auth token. Is it to keep UI in sync, or just copy/paste error?
             atomicState.action = "pollChildren"
             log.debug "Refreshing your auth_token!"
             refreshAuthToken()
-        } else {
+        }
+        else {
             debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
             log.error "Authentication error, invalid authentication method, lack of credentials, etc."
         }
     }
 
-    return isSuccess
+	if (returnStatus == 0)
+		return true
+	else
+		return false
 }
 
-def getChildName()           { return "Ecobee Thermostat" }
-def getSensorChildName()     { return "Ecobee Sensor" }
+def getChildName()           { "Ecobee Thermostat" }
+def getSensorChildName()     { "Ecobee Sensor" }
 def getServerUrl()           { return "https://graph.api.smartthings.com" }
 def getShardUrl()            { return getApiServerUrl() }
-def getCallbackUrl()         { return "https://graph.api.smartthings.com/oauth/callback" }
-def getBuildRedirectUrl()    { return "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}&apiServerUrl=${shardUrl}" }
-def getApiEndpoint()         { return "https://api.ecobee.com" }
-def getSmartThingsClientId() { return appSettings.clientId }
+def getCallbackUrl()        { "https://graph.api.smartthings.com/oauth/callback" }
+def getBuildRedirectUrl()   { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}&apiServerUrl=${shardUrl}" }
+def getApiEndpoint()        { "https://api.ecobee.com" }
+def getSmartThingsClientId() { appSettings.clientId }
 
 def debugEvent(message, displayEvent = false) {
+
 	def results = [
-		name: "appdebug",
-		descriptionText: message,
-		displayed: displayEvent
+			name: "appdebug",
+			descriptionText: message,
+			displayed: displayEvent
 	]
 	log.debug "Generating AppDebug Event: ${results}"
 	sendEvent (results)
+
+}
+
+def debugEventFromParent(child, message) {
+	if (child != null) { child.sendEvent("name":"debugEventFromParent", "value":message, "description":message, displayed: true, isStateChange: true)}
 }
 
 //send both push notification and mobile activity feeds
-def sendPushAndFeeds(notificationMessage) {
+def sendPushAndFeeds(notificationMessage){
 	log.warn "sendPushAndFeeds >> notificationMessage: ${notificationMessage}"
 	log.warn "sendPushAndFeeds >> atomicState.timeSendPush: ${atomicState.timeSendPush}"
-	if (atomicState.timeSendPush) {
-		if (now() - atomicState.timeSendPush > 86400000) { // notification is sent to remind user once a day
+	if (atomicState.timeSendPush){
+		if (now() - atomicState.timeSendPush > 86400000){ // notification is sent to remind user once a day
 			sendPush("Your Ecobee thermostat " + notificationMessage)
 			sendActivityFeeds(notificationMessage)
 			atomicState.timeSendPush = now()
@@ -822,58 +786,6 @@ def sendPushAndFeeds(notificationMessage) {
 	atomicState.authToken = null
 }
 
-/**
- * Stores data about the thermostats in atomicState.
- * @param thermostats - a list of thermostats as returned from the Ecobee API
- */
-private void storeThermostatData(thermostats) {
-    log.trace "Storing thermostat data: $thermostats"
-    def data
-    atomicState.thermostats = thermostats.inject([:]) { collector, stat ->
-        def dni = [ app.id, stat.identifier ].join('.')
-        log.debug "updating dni $dni"
-
-        data = [
-            coolMode: (stat.settings.coolStages > 0),
-            heatMode: (stat.settings.heatStages > 0),
-            deviceTemperatureUnit: stat.settings.useCelsius,
-            minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
-            maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
-            minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
-            maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
-            autoMode: stat.settings.autoHeatCoolFeatureEnabled,
-            auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
-            temperature: (stat.runtime.actualTemperature / 10),
-            heatingSetpoint: stat.runtime.desiredHeat / 10,
-            coolingSetpoint: stat.runtime.desiredCool / 10,
-            thermostatMode: stat.settings.hvacMode,
-            humidity: stat.runtime.actualHumidity,
-            thermostatFanMode: stat.runtime.desiredFanMode
-        ]
-        if (location.temperatureScale == "F") {
-            data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
-            data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
-            data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
-            data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
-            data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
-            data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
-            data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
-
-        }
-
-        if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
-            data["deviceTemperatureUnit"] = "F"
-
-        } else {
-            data["deviceTemperatureUnit"] = "C"
-        }
-
-        collector[dni] = [data:data]
-        return collector
-    }
-    log.debug "updated ${atomicState.thermostats?.size()} thermostats: ${atomicState.thermostats}"
-}
-
 def sendActivityFeeds(notificationMessage) {
 	def devices = getChildDevices()
 	devices.each { child ->
@@ -881,6 +793,14 @@ def sendActivityFeeds(notificationMessage) {
 	}
 }
 
+def roundC (tempC) {
+	return String.format("%.1f", (Math.round(tempC * 2))/2)
+}
+
 def convertFtoC (tempF) {
 	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
+
+def convertCtoF (tempC) {
+	return (Math.round(tempC * (9/5)) + 32).toInteger()
+}

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,12 +64,10 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
-    def dUnit = evt.unit ?: "Watts"
-
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -80,7 +78,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -761,7 +761,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padLeft(2, "0")
+	def seconds = "${60 * fraction as int}".padRight(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -74,6 +74,8 @@ def authPage()
 
 		def redirectUrl = oauthInitUrl()
     
+  	  	log.debug "RedirectURL = ${redirectUrl}"
+
 		return dynamicPage(name: "Credentials", title: "Life360", nextPage:"listCirclesPage", uninstall: uninstallOption, install:false) {
 		    section {
     			href url:redirectUrl, style:"embedded", required:false, title:"Life360", description:description
@@ -255,6 +257,8 @@ def initializeLife360Connection() {
 	def oauthClientId = appSettings.clientId
 	def oauthClientSecret = appSettings.clientSecret
 
+	log.debug "Installed with settings: ${settings}"
+
 	initialize()
     
     def username = settings.username
@@ -265,6 +269,8 @@ def initializeLife360Connection() {
   	def basicCredentials = "${oauthClientId}:${oauthClientSecret}"
     def encodedCredentials = basicCredentials.encodeAsBase64().toString()
     
+    log.debug "Encoded Creds: ${encodedCredentials}"
+
     
     // call life360, get OAUTH token using password flow, save
     // curl -X POST -H "Authorization: Basic cFJFcXVnYWJSZXRyZTRFc3RldGhlcnVmcmVQdW1hbUV4dWNyRUh1YzptM2ZydXBSZXRSZXN3ZXJFQ2hBUHJFOTZxYWtFZHI0Vg==" 
@@ -278,6 +284,8 @@ def initializeLife360Connection() {
     				"username=${username}&"+
                     "password=${password}"
 
+    log.debug "Post Body: ${postBody}"
+	   
     def result = null
     
     try {
@@ -287,6 +295,7 @@ def initializeLife360Connection() {
 		}
         if (result.data.access_token) {
        		state.life360AccessToken = result.data.access_token
+       		log.debug "Access Token = ${state.life360AccessToken}"
             return true;
    		}
 		log.debug "Response=${result.data}"
@@ -524,6 +533,8 @@ def createCircleSubscription() {
         
     def postBody =  "url=${hookUrl}"
 
+    log.debug "Post Body: ${postBody}"
+	   
     def result = null
     
     try {
@@ -575,6 +586,8 @@ def updated() {
         
         	// log.debug "After Find Attempt."
 
+       		log.debug "Member Id = ${member.id}, Name = ${member.firstName} ${member.lastName}, Email Address = ${member.loginEmail}"
+        
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -48,9 +48,9 @@ preferences {
 	}
 	section("Via a push notification and/or an SMS message"){
 		input("recipients", "contact", title: "Send notifications to") {
-			input "phone", "phone", title: "Enter a phone number to get SMS", required: false
+			input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
 			paragraph "If outside the US please make sure to enter the proper country code"
-			input "pushAndPhone", "enum", title: "Notify me via Push Notification", required: false, options: ["Yes", "No"]
+			input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
 		}
 	}
 	section("Minimum time between messages (optional, defaults to every message)") {
@@ -111,24 +111,19 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
+		if (!phone || pushAndPhone != 'No') {
+			log.debug 'sending push'
+			options.method = 'push'
+			//sendPush(msg)
+		}
 		if (phone) {
 			options.phone = phone
-			if (pushAndPhone != 'No') {
-				log.debug 'Sending push and SMS'
-				options.method = 'both'
-			} else {
-				log.debug 'Sending SMS'
-				options.method = 'phone'
-			}
-		} else if (pushAndPhone != 'No') {
-			log.debug 'Sending push'
-			options.method = 'push'
-		} else {
-			log.debug 'Sending nothing'
-			options.method = 'none'
+			log.debug 'sending SMS'
+			//sendSms(phone, msg)
 		}
 		sendNotification(msg, options)
 	}
+
 	if (frequency) {
 		state[evt.deviceId] = now()
 	}