MSA-1463: The device type is to control Glazing Vision rooflights. The main bulk of the app is to open and close the rooflight . The device can be stopped while it is opening, then either opened further or closed using the arrow icons. Level control is included for future functionality. There is also an optional rain sensor that can be attached to the rooflight. If no rain sensor is connected the tile for it will remain blank from set up. If rain sensor is connected the tile will display if its raining or dry. There is also an event for if an optional thermostat is attached that produces an event on the recent tab to show that its been opened or closed by the thermostat.

devicetypes/cr76/rooflight-controller.src/rooflight-controller.groovy

@@ -0,0 +1,183 @@
+metadata {
+	definition (name: "Rooflight Controller", namespace: "CR76", author: "Cameron.Reid@Glazingvision.co.uk") {
+        capability "Refresh"
+        capability "Polling"
+        capability "Switch"
+        capability "Switch level"
+
+        attribute "Rooflight", "string"
+        attribute "Weather", "string"
+        attribute "Thermostat", "string"
+        
+        command "Stop"
+        
+    	fingerprint profileId: "0104", inClusters: "0000,0006,0008"    
+	}
+
+	// simulator metadata
+	simulator {
+    }
+
+	// UI tile definitions
+	tiles {
+		multiAttributeTile(name:"sliderTile", type: "generic", width:6, height:4) {
+    		tileAttribute("device.Rooflight", key: "PRIMARY_CONTROL") {
+        		attributeState "Open", label:'Open', action: "Switch.off", backgroundColor:"#79b821", nextState:"Closing"
+        		attributeState "Closed", label:'Closed', action: "Switch.on", backgroundColor:"#ffffff", nextState:"Opening"
+        		attributeState "Opening", label:'Opening', backgroundColor:"#79b821"
+        		attributeState "Closing", label:'Closing', backgroundColor:"#ffffff"
+    		}
+        	tileAttribute ("device.Rooflight", key: "SECONDARY_CONTROL") {
+				attributeState "Open", label: 'Push to close.', nextState:"Closing"
+            	attributeState "Closed", label: 'Push to open.', nextState:"Opening"
+            	attributeState "Opening", label: 'Skylight opening.'
+            	attributeState "Closing", label: 'Skylight closing.'
+            }
+        }
+        standardTile("Close", "device.Rooflight", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
+			state "default", label: 'Close', action:"Switch.off", icon:"st.thermostat.thermostat-left"
+		}
+        standardTile("Stop", "device.level", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
+			state "default", action:"Stop", icon:"st.sonos.stop-btn"
+		}
+        standardTile("Open", "device.Rooflight", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
+			state "default", label: 'open', action:"Switch.on", icon:"st.thermostat.thermostat-right"
+		}
+        standardTile("Rain", "device.Weather", width: 2, height: 2) {
+        	state "No", backgroundColor: "#ffffff"
+    		state "Dry", label: 'Dry', icon:"st.Weather.weather14", backgroundColor: "#ffffff"
+    		state "Raining", label: 'Raining', icon:"st.Weather.weather10", backgroundColor: "#153591"
+		}
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		main ("sliderTile")
+		details (["sliderTile","Close","Stop","Open","Rain","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "Parse description $description"
+    def name = null
+    def value = null
+ 	
+    if (description?.startsWith("catchall: 0104 0006 38")) {
+        log.debug "On/Off command received from EP 38 open / close command"
+        if (description?.endsWith("01 01 0000001000")) {
+        	name = "Rooflight"
+        	value = "Closed"
+        }
+        else if (description?.endsWith("01 01 0000001001")) {
+        	name = "Rooflight"
+            value = "Open"
+        }
+       else if (description?.endsWith("01 01 0000001003")) {
+        	name = "Rooflight"
+            value = "Opening"
+       } 
+       else if (description?.endsWith("01 01 0000001004")) {
+        	name = "Rooflight"
+            value = "Closing"
+       } 
+    }
+    if (description?.startsWith("catchall: 0104 0006 39")) {
+        log.debug "On/Off command received from EP 39 is rain sensor connected"
+        if (description?.endsWith("01 01 0000001000")) {
+        	name = "Weather"
+            value = "No"
+            state.tile = 1
+        }
+        else if (description?.endsWith("01 01 0000001001")) {
+        	name = "Weather"
+            value = "Dry"
+            state.tile = 0
+            log.debug "${state.tile}"
+        }
+    }
+    if (description?.startsWith("catchall: 0104 0006 40"))  {
+        log.debug "On/Off command received from EP 40 Thermostat"
+        if (description?.endsWith("01 01 0000001000")){
+        	name = "Switch"
+            value = "on"
+        }
+        else if (description?.endsWith("01 01 0000001001")) {
+        	name = "Switch"
+            value = "off"
+        }
+    }
+    if (description?.startsWith("catchall: 0104 0006 41")) {
+        log.debug "On/Off command received from EP 41 rain sensor"
+       	if (description?.endsWith("01 01 0000001000")) {
+        	name = "Weather"
+        	value = "Dry"
+        }
+        else if (description?.endsWith("01 01 0000001001")) {
+        	name = "Weather"
+        	value = "Raining"
+        }
+    }
+    if(description?.startsWith('read attr -')) {
+        def descMap = parseDescriptionAsMap(description) 						//Get level value.
+        value = zigbee.convertHexToInt(descMap.value)
+        log.debug " level = $value"
+        name = "level"
+    }
+    def result = createEvent(name: name, value: value)
+    log.debug "Parse returned ${result?.descriptionText}"
+    return result 
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) {
+    	map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+// Commands to device
+def on() {
+	log.debug "Rooflight Opening"
+    def cmd = []
+	cmd <<"st cmd 0x${device.deviceNetworkId} 0x38 0x0006 0x1 {}"
+	cmd << "delay 250"
+    cmd << zigbee.command(0x0008, 0x04, "64")
+}
+
+def off() {
+	log.debug "Rooflight Closing"
+    def cmd = []
+	cmd << "st cmd 0x${device.deviceNetworkId} 0x38 0x0006 0x0 {}"
+    cmd << "delay 250"
+    cmd << zigbee.command(0x0008, 0x04, "00")
+}
+
+def Stop() {																//Send stop command in the level control cluster.
+	log.debug "send stop"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0008 0x07 {}"
+}
+
+def poll() {
+	log.debug "Poll is calling refresh"
+	refresh()
+}
+
+def refresh() {
+    log.debug "sending refresh command"
+    log.debug "Tile State: ${state.tile}"
+    def cmd = []
+    if("${state.tile}" == "0") {											//If rain sensor is connected refresh rain sensor and rooflight position.
+    	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0006 0x0000"	// Read on / off attribute at End point 0x38 Rooflight open / closed.
+    	cmd << "delay 250"
+        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0008 0x0000"	// Read Level position at End point 0x38 Rooflight Position.
+        cmd << "delay 250"
+    	cmd << "st rattr 0x${device.deviceNetworkId} 0x41 0x0006 0x0000"	// Read on / off attribute at End point 0x41 Rain sensor.
+    }
+    else {
+        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0006 0x0000"	// Read on / off attribute at End point 0x38 Rooflight open / closed.
+        cmd << "delay 250"
+        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0008 0x0000"	// Read on / off attribute at End point 0x88 Rain sensor.
+    }
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -67,6 +67,12 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -90,7 +96,15 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-    return zigbee.levelRefresh()
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.levelRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
 }
 
 def refresh() {
@@ -103,8 +117,6 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -62,7 +62,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-			log.trace "Parsing description"
+        	log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -72,13 +72,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
+                        if (parent.state.inBulbDiscovery)
+                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-					parent.hubVerification(device.hub.id, msg.body)
+                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -91,7 +91,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +203,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
+    if(hueValue>360 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/*
+/* 
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-
+        
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-
+                        
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+		
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
+    if(hueValue>360 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-
+    
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastActivity == null){
+				state.lastActivity = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+			}
+			state.lastActivity = now()
 		}
 	}
 	else {
@@ -120,7 +126,15 @@ def on() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.onOffRefresh()
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.onOffRefresh()
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -128,10 +142,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
+	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
+	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -101,6 +101,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -226,8 +233,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -278,7 +283,15 @@ private Map getMoistureResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -292,19 +305,23 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -105,6 +105,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -241,8 +248,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -289,7 +294,15 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else { 
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -303,19 +316,24 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -206,8 +206,6 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -127,6 +127,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -306,8 +313,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -371,7 +376,15 @@ private getAccelerationResult(numValue) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -401,16 +414,13 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	def configCmds = enrollResponse() +
 			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300) +
+			zigbee.temperatureConfig() +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,8 +206,6 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-	        if (roundedPct <= 0)
-		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -92,6 +92,13 @@ def parse(String description) {
     	map = parseIasMessage(description)
     }
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -200,8 +207,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -241,7 +246,15 @@ private Map getContactResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh() {
@@ -255,19 +268,23 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
 
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -83,6 +83,13 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -207,8 +214,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -246,7 +251,14 @@ private Map getHumidityResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
 }
 
 def refresh()
@@ -264,19 +276,23 @@ def refresh()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
-	def humidityConfigCmds = [
+	def configCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -54,6 +54,12 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             sendEvent(event)
@@ -80,7 +86,15 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-    return zigbee.onOffRefresh()
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
 }
 
 def refresh() {
@@ -89,8 +103,7 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -85,6 +85,12 @@ def parse(String description) {
     def event = zigbee.getEvent(description)
     if (event) {
         log.debug event
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -99,7 +105,7 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
@@ -124,7 +130,15 @@ def off() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-    return zigbee.onOffRefresh()
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
 }
 
 def refresh() {
@@ -133,10 +147,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -74,6 +74,12 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -104,7 +110,15 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-    return zigbee.onOffRefresh()
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
 }
 
 def refresh() {
@@ -113,10 +127,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
-    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on switch when vibration is sensed",
+    description: "Turn on Monitor when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When vibration is sensed...") {
+	section("When the keyboard is used...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on switch...") {
+section("Turn on/off a light...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,3 +47,5 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
+
+

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,12 +64,10 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
-    def dUnit = evt.unit ?: "Watts"
-
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -80,7 +78,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -761,7 +761,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padLeft(2, "0")
+	def seconds = "${60 * fraction as int}".padRight(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -170,7 +170,7 @@ def bulbDiscovery() {
 
 	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, options:newLights
 			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
 		}
 		section {
@@ -724,13 +724,13 @@ private void updateBridgeStatus(childDevice) {
 }
 
 /**
- * Check if all Hue bridges have been heard from in the last 11 minutes, if not an Offline event will be sent
- * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
+ * Check if all Hue bridges have been heard from in the last 16 minutes, if not an Offline event will be sent
+ * for the bridge. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
     def bridges = getHueBridges()
-    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 11)
+    // Check if each bridge has been heard from within the last 16 minutes (3 poll intervals times 5 minutes plus buffer)
+    def time = now() - (1000 * 60 * 30)
     bridges.each {
         def d = getChildDevice(it.value.mac)
 	    if(d) {
@@ -740,21 +740,16 @@ private void checkBridgeStatus() {
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
 		    }
 
-			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.key is Offline"
-				d.sendEvent(name: "status", value: "Offline")
-
-				state.bulbs?.each {
-					it.value.online = false
-				}
-				getChildDevices().each {
-					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
-				}
-			} else {
+	        if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
+	            log.warn "Bridge $it.key is Offline"
+	            d.sendEvent(name: "status", value: "Offline")
+                // set all lights to offline since bridge is not reachable
+                state.bulbs?.each {it.value.online = false}
+	        } else {
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
-			}
-		}
-	}
+	        }
+	    }
+    }
 }
 
 def isValidSource(macAddress) {
@@ -762,10 +757,6 @@ def isValidSource(macAddress) {
 	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
 }
 
-def isInBulbDiscovery() {
-	return state.inBulbDiscovery
-}
-
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -960,7 +951,6 @@ private handlePoll(body) {
 			} else {
 				state.bulbs[bulb.key]?.online = false
 				log.warn "$device is not reachable by Hue bridge"
-				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
 			}
 		}
 	}

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -111,23 +111,16 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
+		if (pushAndPhone != 'No') {
+			log.debug 'sending push'
+			options.method = 'push'
+			sendNotification(msg, options)
+		}
 		if (phone) {
 			options.phone = phone
-			if (pushAndPhone != 'No') {
-				log.debug 'Sending push and SMS'
-				options.method = 'both'
-			} else {
-				log.debug 'Sending SMS'
-				options.method = 'phone'
-			}
-		} else if (pushAndPhone != 'No') {
-			log.debug 'Sending push'
-			options.method = 'push'
-		} else {
-			log.debug 'Sending nothing'
-			options.method = 'none'
+			log.debug 'sending SMS'
+			sendNotification(msg, options)
 		}
-		sendNotification(msg, options)
 	}
 	if (frequency) {
 		state[evt.deviceId] = now()