MSA-1522: controls one z wave switch via another z wave temp sensor to check for a max temp limit and turns off the switch, useful for heating applications.

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,10 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-            map.unit = getTemperatureScale()
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -93,7 +93,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def healthPoll() {
@@ -105,7 +105,9 @@ def healthPoll() {
 def configure() {
     unschedule()
     runEvery5Minutes("healthPoll")
+    log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -104,21 +104,8 @@ def parse(String description) {
 		}
 	}
 	else {
-		def cluster = zigbee.parse(description)
-
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
-			if (cluster.data[0] == 0x00) {
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.warn "DID NOT PARSE MESSAGE for description : $description"
-			log.debug "${cluster}"
-		}
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
@@ -141,10 +128,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -118,28 +118,14 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -149,8 +135,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -304,9 +292,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -122,37 +122,19 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
 				break
 
 			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
+				log.debug 'motion'
+				resultMap.name = 'motion'
 				break
 		}
 	}
@@ -162,8 +144,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -319,9 +303,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -147,33 +147,20 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+			resultMap = getBatteryResult(cluster.data.last())
 			break
 
 			case 0xFC02:
-				log.debug 'ACCELERATION'
+			log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-			break
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 		}
 	}
 
@@ -182,8 +169,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -412,9 +401,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -109,28 +109,15 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07){
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -140,8 +127,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -266,9 +255,8 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -93,37 +93,20 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0xFC45:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-					resultMap = getHumidityResult(display)
-				}
+                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+                resultMap = getHumidityResult(display)
                 break
         }
     }
@@ -133,8 +116,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -279,9 +264,8 @@ def refresh()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -60,21 +60,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -97,15 +84,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -95,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
+        log.trace "zigbeeMap : $zigbeeMap"
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -107,18 +107,8 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
         }
     }
 }
@@ -138,15 +128,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
@@ -189,5 +177,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -83,21 +83,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -121,15 +108,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -37,10 +37,7 @@ preferences {
 
 def mainPage() {
 	def bridges = bridgesDiscovered()
-
-	if (state.refreshUsernameNeeded) {
-		return bridgeLinking()
-	} else if (state.username && bridges) {
+	if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
@@ -105,22 +102,13 @@ def bridgeLinking() {
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-	def paragraphText
+    def paragraphText
 	if (selectedHue) {
-		if (state.refreshUsernameNeeded) {
-			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
-		} else {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-		}
-	} else {
-		paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-	}
+    } else {
+    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+    }
 	if (state.username) { //if discovery worked
-		if (state.refreshUsernameNeeded) {
-			state.refreshUsernameNeeded = false
-			// Issue one poll with new username to cancel local polling with old username
-			poll()
-		}
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
@@ -927,15 +915,8 @@ private handleCommandResponse(body) {
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
-		} else if (payload?.error) {
-			log.warn "Error returned from Hue bridge, error = ${payload?.error}"
-			// Check for unauthorized user
-			if (payload?.error?.type?.value == 1) {
-				log.error "Hue username is not valid"
-				state.refreshUsernameNeeded = true
-				state.username = null
-			}
-			return []
+		} else if (payload.error) {
+			log.warn "Error returned from Hue bridge error = ${body?.error}"
 		}
 	}
 
@@ -1213,7 +1194,7 @@ private poll() {
 }
 
 private isOnline(id) {
-	return (state.bulbs[id]?.online != null && state.bulbs[id]?.online) || state.bulbs[id]?.online == null
+	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
 }
 
 private put(path, body) {
@@ -1280,7 +1261,7 @@ def convertBulbListToMap() {
 	try {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
-			state.bulbs?.unique {it.id}.each { bulb ->
+			state.bulbs.unique {it.id}.each { bulb ->
 				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -12,13 +12,13 @@
  *
  *  It's Too Hot
  *
- *  Author: SmartThings
+ *  Author: SmartThings - zahir
  */
 definition(
     name: "It's Too Hot",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Monitor the temperature and when it rises above your setting get a notification and/or turn on an A/C unit or fan.",
+    description: "Monitor the temperature and when it rises above your setting get a notification and/or turn off underfloor heating.",
     category: "Convenience",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/its-too-hot.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/its-too-hot@2x.png"
@@ -37,7 +37,7 @@ preferences {
             input "phone1", "phone", title: "Send a Text Message?", required: false
         }
     }
-	section("Turn on which A/C or fan...") {
+	section("Turn off which A/C or fan...") {
 		input "switch1", "capability.switch", required: false
 	}
 }
@@ -73,9 +73,9 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
+			def tempScale = location.temperatureScale ?: "C"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
-			switch1?.on()
+			switch1?.off()
 		}
 	}
 }
@@ -98,4 +98,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -97,7 +97,7 @@ def authPage() {
     def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
-			log.debug "Harmony - About to create access token"
+			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
@@ -141,13 +141,13 @@ def callback() {
 	def redirectUrl = null
 	if (params.authQueryString) {
 		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
-		log.debug "Harmony - redirectUrl: ${redirectUrl}"
+		log.debug "redirectUrl: ${redirectUrl}"
 	} else {
-		log.warn "Harmony - No authQueryString"
+		log.warn "No authQueryString"
 	}
 
 	if (state.HarmonyAccessToken) {
-		log.debug "Harmony - Access token already exists"
+		log.debug "Access token already exists"
 		discovery()
 		success()
 	} else {
@@ -155,27 +155,27 @@ def callback() {
 		if (code) {
 			if (code.size() > 6) {
 				// Harmony code
-				log.debug "Harmony - Exchanging code for access token"
+				log.debug "Exchanging code for access token"
 				receiveToken(redirectUrl)
 			} else {
 				// Initiate the Harmony OAuth flow.
 				init()
 			}
 		} else {
-			log.debug "Harmony - This code should be unreachable"
+			log.debug "This code should be unreachable"
 			success()
 		}
 	}
 }
 
 def init() {
-	log.debug "Harmony - Requesting Code"
+	log.debug "Requesting Code"
 	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${servercallbackUrl}" ]
 	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
-	log.debug "Harmony - receiveToken"
+	log.debug "receiveToken"
     def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
@@ -186,7 +186,7 @@ def receiveToken(redirectUrl = null) {
         }
 	} catch (java.util.concurrent.TimeoutException e) {
     	fail(e)
-		log.warn "Harmony - Connection timed out, please try again later."
+		log.warn "Connection timed out, please try again later."
 	}
     discovery()
 	if (state.HarmonyAccessToken) {
@@ -310,7 +310,7 @@ def buildRedirectUrl(page) {
 
 def installed() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -319,7 +319,7 @@ def installed() {
 
 def updated() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -330,9 +330,9 @@ def uninstalled() {
 	if (state.HarmonyAccessToken) {
 		try {
         	state.HarmonyAccessToken = ""
-        	log.debug "Harmony - Success disconnecting Harmony from SmartThings"
+        	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "Harmony - Error disconnecting Harmony from SmartThings: ${e.statusCode}"
+			log.error "Error disconnecting Harmony from SmartThings: ${e.statusCode}"
 		}
 	}
 }
@@ -341,8 +341,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-    runEvery5Minutes("poll")
-    getActivityList()
+        runEvery5Minutes("poll")
 	}
 }
 
@@ -351,7 +350,7 @@ def getHarmonydevices() {
 }
 
 Map discoverDevices() {
-    log.trace "Harmony - Discovering devices..."
+    log.trace "Discovering devices..."
     discovery()
     if (getHarmonydevices() != []) {
         def devices = state.Harmonydevices.hubs
@@ -381,52 +380,52 @@ def discovery() {
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
 	    	if (response.status == 200) {
-            	log.debug "Harmony - valid Token"
+            	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
 	        } else {
-            	log.debug "Harmony - Error: $response.status"
+            	log.debug "Error: $response.status"
             }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
             state.remove("HarmonyAccessToken")
-            log.warn "Harmony - Harmony Access token has expired"
+            log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
-		log.warn "Harmony - Connection to the hub timed out. Please restart the hub and try again."
+		log.warn "Connection to the hub timed out. Please restart the hub and try again."
     state.resethub = true
  	} catch (e) {
-    log.info "Harmony - Error: $e"
+    log.info "Logitech Harmony - Error: $e"
 	}
     return null
 }
 
 def addDevice() {
-    log.trace "Harmony - Adding Hubs"
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyHubs.find { it.key == dni }
             d = addChildDevice("smartthings", "Logitech Harmony Hub C2C", dni, null, [label:"${newAction.value}"])
-            log.trace "Harmony - Created ${d.displayName} with id $dni"
+            log.trace "created ${d.displayName} with id $dni"
             poll()
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
-    log.trace "Harmony - Adding Activities"
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
             if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-	            log.trace "Harmony - Created ${d.displayName} with id $dni"
+	            log.trace "created ${d.displayName} with id $dni"
 	            poll()
             }
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
 }
@@ -456,17 +455,17 @@ def activity(dni,mode) {
 
 def activityResponse(response, data) {
   if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+      log.warn "Logitech Harmony - Access token has expired"
     }
   } else {
     if (response.status == 200) {
-      log.trace "Harmony - Command sent succesfully"
+      log.trace "Command sent succesfully"
       poll()
     } else {
-      log.trace "Harmony - Command failed. Error: $response.status"
+      log.trace "Command failed. Error: $response.status"
     }
   }
 }
@@ -482,16 +481,16 @@ def poll() {
         ]
         asynchttp_v1.get('pollResponse', params)
       } else {
-        log.warn "Harmony - Access token has expired"
+        log.warn "Logitech Harmony - Access token has expired"
       }
 }
 
 def pollResponse(response, data) {
 	if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+      log.warn "Logitech Harmony - Access token has expired"
     }
 	} else {
 			def ResponseValues
@@ -499,7 +498,7 @@ def pollResponse(response, data) {
 					// json response already parsed into JSONElement object
 					ResponseValues = response.json
 			} catch (e) {
-					log.error "Harmony - error parsing json from response: $e"
+					log.error "Logitech Harmony - error parsing json from response: $e"
 			}
 			if (ResponseValues) {
         def map = [:]
@@ -521,7 +520,7 @@ def pollResponse(response, data) {
                   }
               }
           } else {
-            log.trace "Harmony - error response: $it.value.message"
+            log.trace "Logitech Harmony - error response: $it.value.message"
           }
         }
         def activities = getChildDevices()
@@ -546,43 +545,11 @@ def pollResponse(response, data) {
             }
         }
 			} else {
-					log.debug "Harmony - did not get json results from response body: $response.data"
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
 			}
 	}
 }
 
-def getActivityList() {
-    if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                response.data.hubs.each {
-                    def hub = getChildDevice("harmony-${it.key}")
-                    if (hub) {
-                    	def hubname = getHubName("${it.key}")
-                        def activities = []
-                        def aux = it.value.response.data.activities.size()
-                        if (aux >= 1) {
-                            activities = it.value.response.data.activities.collect {
-                                [id: it.key, name: it.value['name'], type: it.value['type']]
-                            }
-                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					          }
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-        	log.trace e
-        } catch (java.net.SocketTimeoutException e) {
-        	log.trace e
-		    } catch(Exception e) {
-        	log.trace e
-		    }
-    }
-}
-
 def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
@@ -643,7 +610,7 @@ def sendNotification(msg) {
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
-    log.debug "Harmony - request = ${request}"
+    log.debug "request = ${request}"
 
     def json = request.JSON
 
@@ -652,14 +619,14 @@ def hookEventHandler() {
 }
 
 def listDevices() {
-	log.debug "Harmony - getDevices(), params: ${params}"
+	log.debug "getDevices, params: ${params}"
 	allDevices.collect {
 		deviceItem(it)
 	}
 }
 
 def getDevice() {
-	log.debug "Harmony - getDevice(), params: ${params}"
+	log.debug "getDevice, params: ${params}"
 	def device = allDevices.find { it.id == params.id }
 	if (!device) {
 		render status: 404, data: '{"msg": "Device not found"}'
@@ -672,7 +639,7 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-	log.debug "Harmony - updateDevice(), params: ${params}, request: ${data}"
+	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
@@ -740,7 +707,7 @@ def getDeviceCapabilityCommands(deviceCapabilities) {
 }
 
 def listSubscriptions() {
-	log.debug "Harmony - listSubscriptions()"
+	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
 		def deviceInfo = state[it.device.id]
 		def response = [
@@ -761,17 +728,17 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
 		def device = allDevices.find { it.id == data.deviceId }
 		if (device) {
 			if (!state.harmonyHubs) {
-				log.debug "Harmony - Adding callbackUrl: $callbackUrl"
+				log.debug "Adding callbackUrl: $callbackUrl"
 				state[device.id] = [callbackUrl: callbackUrl]
 			}
-			log.debug "Harmony - Adding subscription"
+			log.debug "Adding subscription"
 			def subscription = subscribe(device, attribute, deviceHandler)
 			if (!subscription || !subscription.eventSubscription) {
 				subscription = app.subscriptions?.find { it.device?.device && it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
@@ -799,7 +766,7 @@ def removeSubscription() {
 
 	log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
 	if (device) {
-		log.debug "Harmony - Removing subscription for device: ${device.id}"
+		log.debug "Removing subscription for device: ${device.id}"
 		state.remove(device.id)
 		unsubscribe(device)
 	}
@@ -823,17 +790,17 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Harmony - Sending data to $harmonyHub.name"
+      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {
 		if (deviceInfo.callbackUrl) {
 			sendToHarmony(evt, deviceInfo.callbackUrl)
 		} else {
-			log.warn "Harmony - No callbackUrl set for device: ${evt.deviceId}"
+			log.warn "No callbackUrl set for device: ${evt.deviceId}"
 		}
 	} else {
-		log.warn "Harmony - No subscribed device found for device: ${evt.deviceId}"
+		log.warn "No subscribed device found for device: ${evt.deviceId}"
 	}
 }
 
@@ -857,12 +824,12 @@ def sendToHarmony(evt, String callbackUrl) {
       body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
     ]
     try {
-        log.debug "Harmony - Sending data to Harmony Cloud: $params"
+        log.debug "Sending data to Harmony Cloud: $params"
         httpPostJson(params) { resp ->
-            log.debug "Harmony - Cloud Response: ${resp.status}"
+            log.debug "Harmony Cloud - Response: ${resp.status}"
         }
     } catch (e) {
-        log.error "Harmony - Cloud Something went wrong: $e"
+        log.error "Harmony Cloud - Something went wrong: $e"
     }
   }
 }
@@ -887,10 +854,10 @@ def activityCallback() {
 		if (data.errorCode == "200") {
 			device.setCurrentActivity(data.currentActivityId)
 		} else {
-			log.warn "Harmony - Activity callback error: ${data}"
+			log.warn "Activity callback error: ${data}"
 		}
 	} else {
-		log.warn "Harmony - Activity callback sent to non-existant dni: ${params.dni}"
+		log.warn "Activity callback sent to non-existant dni: ${params.dni}"
 	}
 	render status: 200, data: '{"msg": "Successfully received callbackUrl"}'
 }
@@ -924,13 +891,13 @@ def harmony() {
 }
 
 def deleteHarmony() {
-	log.debug "Harmony - Trying to delete Harmony hub with mac: ${params.mac}"
+	log.debug "Trying to delete Harmony hub with mac: ${params.mac}"
 	def harmonyHub = state.harmonyHubs?.find { it.mac == params.mac }
 	if (harmonyHub) {
-		log.debug "Harmony - Deleting Harmony hub with mac: ${params.mac}"
+		log.debug "Deleting Harmony hub with mac: ${params.mac}"
 		state.harmonyHubs.remove(harmonyHub)
 	} else {
-		log.debug "Harmony - Couldn't find Harmony hub with mac: ${params.mac}"
+		log.debug "Couldn't find Harmony hub with mac: ${params.mac}"
 	}
 	render status: 204, data: "{}"
 }