MSA-1793: Hi,

We update the zwave version with our fingerprint data and we add the tamper alert.
Regards,
Andres V.

devicetypes/besense/besense-door-window-sensor.src/besense-door-window-sensor.groovy

@@ -0,0 +1,256 @@
+/**
+ *  Besense z-wave Door/window sensor
+ */
+
+metadata {
+	definition (name: "BeSense Door/Window Sensor", namespace: "BeSense", author: "BeSense") {
+		capability "Contact Sensor"
+		capability "Sensor"
+		capability "Battery"
+		capability "Configuration"
+
+		fingerprint mfr: "0214", prod: "0002", model: "0001", deviceJoinName: "BeSense Door/window sensor" 
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "open":  "command: 2001, payload: FF"
+		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
+	}
+
+	// UI tile definitions
+	tiles(scale: 1) {
+		standardTile("contact", "device.contact", width: 3, height: 3, canChangeIcon: true) {
+			state ("open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ea0f46")
+			state ("closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#27CC73")
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main "contact"
+		details(["contact", "battery"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			log.debug description
+		} else {
+			result = createEvent(
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				isStateChange: true,
+			)
+		}
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	log.debug "parsed '$description' to $result"
+	return result
+}
+
+def updated() {
+	def cmds = []
+	if (!state.MSR) {
+		cmds = [
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			"delay 1200",
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		]
+	} else if (!state.lastbat) {
+		cmds = []
+	} else {
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+	}
+	response(cmds)
+}
+
+def configure() {
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
+	], 6000)
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
+{
+	sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	def cmds = []
+	if (!state.MSR) {
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 1200"
+	}
+	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
+		cmds << command(zwave.batteryV1.batteryGet())
+	} else {
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+	}
+	[event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbat = now()
+	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	retypeBasedOnMSR()
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
+		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	} else if (!device.currentState("battery")) {
+		if (msr == "0086-0102-0059") {
+			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
+		} else {
+			result << response(command(zwave.batteryV1.batteryGet()))
+		}
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	// log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def retypeBasedOnMSR() {
+	switch (state.MSR) {
+		case "0086-0002-002D":
+			log.debug "Changing device type to Z-Wave Water Sensor"
+			setDeviceType("Z-Wave Water Sensor")
+			break
+		case "011F-0001-0001":  // Schlage motion
+		case "014A-0001-0001":  // Ecolink motion
+		case "014A-0004-0001":  // Ecolink motion +
+		case "0060-0001-0002":  // Everspring SP814
+		case "0060-0001-0003":  // Everspring HSP02
+		case "011A-0601-0901":  // Enerwave ZWN-BPC
+        case "0214-0002-0002": // Besense pir or ceiling sensor
+			log.debug "Changing device type to Z-Wave Motion Sensor"
+			setDeviceType("Z-Wave Motion Sensor")
+			break
+		case "013C-0002-000D":  // Philio multi +
+			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
+			setDeviceType("3-in-1 Multisensor Plus (SG)")
+			break
+		case "0109-2001-0106":  // Vision door/window
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			break
+	}
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,6 +23,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
+        capability "Light"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,6 +14,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,6 +13,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,6 +36,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
+		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -40,14 +40,11 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	def name = null
-	def value = description
-	if (zigbee.isZoneType19(description)) {
-		name = "contact"
-		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
+	def resMap
+	if (description.startsWith("zone")) {
+		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
 	}
 	
-	def result = createEvent(name: name, value: value)
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Parse returned $resMap"
+	return resMap
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,6 +23,8 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
+		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -88,7 +88,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = [:]
 
-	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
+	if (!isSupportedDescription(description) || description.startsWith("zone")) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null
 
-	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
+	if (!isSupportedDescription(description) || description.startsWith("zone")) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -45,7 +45,7 @@ metadata {
 
 def parse(String description) {
 	def results = [:]
-	if (isZoneType19(description) || !isSupportedDescription(description)) {
+	if (description.startsWith("zone") || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -87,16 +87,12 @@ private String parseName(String description) {
 }
 
 private String parseValue(String description) {
-	if (isZoneType19(description)) {
-		if (translateStatusZoneType19(description)) {
-			return "active"
-		}
-		else {
-			return "inactive"
-		}
+	def zs = zigbee.parseZoneStatus(description)
+	if (zs) {
+		zs.isAlarm1Set() ? "active" : "inactive"
+	} else {
+		description
 	}
-
-	description
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
+	if (!isSupportedDescription(description) || description.startsWith("zone")) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,12 +488,7 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	else if (zigbee.translateStatusZoneType19(description)) {
-		return "open"
-	}
-	else {
-		return "closed"
-	}
+	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
+	if (!isSupportedDescription(description) || description.startsWith("zone")) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -118,15 +118,38 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
     def buttonState = ""
     def buttonNumber = 0
-    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
-            &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.command == "01") {
+    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.commandInt == 1) {
             getButtonResult("press")
         }
-        else if (descMap.command == "00") {
+        else if (descMap.commandInt == 0) {
             getButtonResult("release")
         }
     }
+    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
+        if (descMap.commandInt == 1) {
+            getButtonResult("press")
+        }
+        else if (descMap.commandInt == 0) {
+            def button = 1
+            switch(descMap.sourceEndpoint) {
+                case "01":
+                    button = 4
+                    break
+                case "02":
+                    button = 3
+                    break
+                case "03":
+                    button = 1
+                    break
+                case "04":
+                    button = 2
+                    break
+            }
+        
+            getButtonResult("release", button)
+        }
+    }
     else if (descMap.clusterInt == 0x0006) {
         buttonState = "pushed"
         if (descMap.command == "01") {

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,6 +23,7 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
+* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,6 +22,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
+        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
+        capability "Light"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -93,7 +94,13 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    def additionalCmds = []
+    if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
+        additionalCmds = zigbee.on()
+    } else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
+        additionalCmds = refresh()
+    }
+    zigbee.setLevel(value) + additionalCmds
 }
 /**
  * PING is used by Device-Watch in attempt to reach the Device
@@ -103,7 +110,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def configure() {
@@ -113,5 +120,5 @@ def configure() {
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,6 +28,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Health Check"
+		capability "Light"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -29,6 +29,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
+        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
+        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -26,6 +26,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,6 +6,12 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
+* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
+* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
+* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
+* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
+* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
+* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -40,4 +46,9 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
+* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -28,6 +29,8 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
+		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
+		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,6 +25,7 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
+		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,6 +19,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -26,6 +27,8 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
+		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
+		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -20,6 +20,9 @@
  *      JLH - 02-15-2014 - Fuller use of ecobee API
  *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
  */
+
+include 'localization'
+
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -86,7 +89,7 @@ def authPage() {
 			if (numFound > 0)  {
 				section("") {
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
-					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
+					input(name: "ecobeesensors", title: "Select Ecobee Sensors ({{numFound}} found)", messageArgs: [numFound: numFound], type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
 			}
 		}

smartapps/smartthings/ecobee-connect.src/i18n/ar.properties

@@ -0,0 +1,17 @@
+'''Connect your Ecobee thermostat to SmartThings.'''.ar=قم بتوصيل ثرموستات Ecobee بـ SmartThings.
+'''You are connected.'''.ar=أنت متصل.
+'''Click to enter Ecobee Credentials'''.ar=النقر لإدخال بيانات اعتماد Ecobee
+'''Login'''.ar=تسجيل الدخول
+'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.ar=انقر أدناه لتسجيل الدخول إلى خدمة ecobee والمصادقة على الوصول إلى SmartThings. تأكد من التمرير للأسفل على الصفحة ٢ والضغط على زر ”السماح“.
+'''Select Your Thermostats'''.ar=تحديد الثرموستات
+'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة أجهزة ثرموستات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
+'''Tap to choose'''.ar=النقر لاختيار
+'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة مستشعرات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
+'''Select Ecobee Sensors ({{numFound}} found)'''.ar=تحديد مستشعرات Ecobee‏ ‎({{numFound}} found)‎
+'''Your ecobee Account is now connected to SmartThings!'''.ar=حساب ecobee متصل الآن بـ SmartThings!
+'''Click 'Done' to finish setup.'''.ar=انقر فوق ”تم“ لإنهاء الإعداد.
+'''The connection could not be established!'''.ar=يتعذر إنشاء الاتصال!
+'''Click 'Done' to return to the menu.'''.ar=انقر فوق ”تم“ للعودة إلى القائمة.
+'''{{deviceName}} is connected to SmartThings'''.ar={{deviceName}} متصل بـ SmartThings
+'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.ar=تم قطع اتصال {{deviceName}} بـ SmartThings، لأن بيانات اعتماد الوصول قد تغيرت أو فُقدت. يُرجى الانتقال إلى التطبيق الذكي Ecobee (Connect)‎ وإعادة إدخال بيانات اعتماد تسجيل الدخول إلى حسابك.
+'''Your Ecobee thermostat'''.ar=ثرموستات Ecobee

smartapps/smartthings/ecobee-connect.src/i18n/th.properties

@@ -0,0 +1,17 @@
+'''Connect your Ecobee thermostat to SmartThings.'''.th=เชื่อมต่อตัวควบคุมอุณหภูมิ Ecobee ของคุณเข้ากับ SmartThings
+'''You are connected.'''.th=คุณได้เชื่อมต่อแล้ว
+'''Click to enter Ecobee Credentials'''.th=คลิกเพื่อใส่ ข้อมูลยืนยันตัวตน Ecobee
+'''Login'''.th=เข้าสู่ระบบ
+'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.th=แตะด้านล่างเพื่อเข้าสู่บริการ Ecobee และอนุญาตการเข้าถึงของ SmartThings ดูให้แน่ใจว่าได้เลื่อนลงมาที่หน้า 2 แล้วกดปุ่ม 'อนุญาต'
+'''Select Your Thermostats'''.th=เลือกตัวควบคุมอุณหภูมิของคุณ
+'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการตัวควบคุมอุณหภูมิ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกตัวควบคุมอุณหภูมิที่คุณต้องการจะเชื่อมต่อกับ SmartThings
+'''Tap to choose'''.th=แตะเพื่อเลือก
+'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการเซ็นเซอร์ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกเซ็นเซอร์ที่คุณต้องการจะเชื่อมต่อกับ SmartThings
+'''Select Ecobee Sensors ({{numFound} found)'''.th=เลือกเซ็นเซอร์ Ecobee ({{numFound}} found)
+'''Your ecobee Account is now connected to SmartThings!'''.th=ตอนนี้บัญชีผู้ใช้ Ecobee ของคุณเชื่อมต่อกับ SmartThings แล้ว
+'''Click 'Done' to finish setup.'''.th=คลิก 'เสร็จสิ้น' เพื่อทำการตั้งค่าให้เสร็จสิ้น
+'''The connection could not be established!'''.th=ไม่สามารถสร้างการเชื่อมต่อได้!
+'''Click 'Done' to return to the menu.'''.th=คลิก 'เสร็จสิ้น' เพื่อกลับไปยังเมนู
+'''{{deviceName}} is connected to SmartThings'''.th={{deviceName}} เชื่อมต่อกับ SmartThings แล้ว
+'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.th={{deviceName}} ถูกตัดการเชื่อมต่อจาก SmartThings เนื่องจากข้อมูลการเข้าถึงถูกเปลี่ยนแปลงหรือหายไป กรุณาไปที่ Ecobee (การเชื่อมต่อ) SmartApp และใส่ข้อมูลยืนยันตัวตนการเข้าสู่บัญชีผู้ใช้ของคุณอีกครั้ง
+'''Your Ecobee thermostat'''.th=ตัวควบคุมอุณหภูมิ Ecobee ของคุณ

smartapps/smartthings/ecobee-connect.src/i18n/tr.properties

@@ -0,0 +1,17 @@
+'''Connect your Ecobee thermostat to SmartThings.'''.tr=Ecobee termostatınızı SmartThings'e bağlayın.
+'''You are connected.'''.tr=Bağlantı kurdunuz.
+'''Click to enter Ecobee Credentials'''.tr=Ecobee Kimlik Bilgilerinizi girmek için tıklayın
+'''Login'''.tr=Oturum aç
+'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.tr=Ecobee servisinde oturum açmak ve SmartThings erişimine izin vermek için aşağıya dokunun. Ekranı 2. sayfaya kaydırdığınızdan emin olun ve 'İzin Ver' tuşuna basın.
+'''Select Your Thermostats'''.tr=Termostatlarınızı Seçin
+'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee termostatlarının listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
+'''Tap to choose'''.tr=Seçmek için dokunun
+'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee sensörlerinin listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
+'''Select Ecobee Sensors ({{numFound}} found)'''.tr=Ecobee Sensörlerini seçin ({{numFound}} bulundu)
+'''Your ecobee Account is now connected to SmartThings!'''.tr=Ecobee Hesabınız artık SmartThings'e bağlandı!
+'''Click 'Done' to finish setup.'''.tr=Kurulumu bitirmek için 'Bitti' öğesine tıklayın.
+'''The connection could not be established!'''.tr=Bağlantı kurulamadı!
+'''Click 'Done' to return to the menu.'''.tr=Menüye dönmek için 'Bitti' öğesine tıklayın.
+'''{{deviceName}} is connected to SmartThings'''.tr={{cihazİsmi}} SmartThings'e bağlandı
+'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.tr=Ecobee termostatınız
+'''Your Ecobee thermostat'''.tr=Ecobee termostatınız