MSA-1899: Trane XL624 Thermostat with humidity display, up/down buttons instead of slider.

DVCSMP-2570 Adding centralite zigbee button fingerprint

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,7 +11,7 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
-        // capability "Health Check"
+        capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -476,7 +476,7 @@ def configure() {
 
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    // sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,6 +100,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,6 +58,11 @@ metadata {
  }
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -84,6 +84,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,13 +26,13 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
-		// capability "Health Check"
+		capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
-		// fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
+		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -85,10 +85,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	// sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -436,4 +436,3 @@ def listCurrentParams() {
 
 	delayBetween(cmds, 500)
 }
-

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,6 +50,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,10 +57,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,10 +45,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,10 +66,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,10 +50,19 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,10 +55,20 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -7,6 +8,7 @@ metadata {
 	definition (name: "Logitech Harmony Hub C2C", namespace: "smartthings", author: "SmartThings") {
 		capability "Media Controller"
         capability "Refresh"
+		capability "Health Check"
         
         command "activityoff"   
         command "alloff" 
@@ -38,6 +40,20 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
+def installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 def startActivity(String activityId) {
 	log.debug "Executing 'Start Activity'"
 	log.trace parent.activity("$device.deviceNetworkId-$activityId","start")    
@@ -58,6 +74,10 @@ def poll() {
 	log.trace parent.poll()
 }
 
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "Executing 'Refresh'"
 	log.trace parent.poll()

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -91,6 +91,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -135,10 +135,7 @@ def refresh() {
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
 			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
 			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 }
 
 def configure() {
@@ -150,5 +147,10 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() +
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0x104E]) +   // New firmware
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300)
+
 }

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -20,6 +20,7 @@ metadata {
 	definition(name: "Wattvision", namespace: "smartthings", author: "Steve Vlaminck") {
 		capability "Power Meter"
 		capability "Refresh"
+		capability "Sensor"
 		attribute "powerContent", "string"
 	}
 

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -18,7 +18,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
     	capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-lock.src/README.md

@@ -0,0 +1,46 @@
+# Zigbee Lock
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Push Button Deadbolt (YRD210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-deadbolt-yrd210)
+* [Yale Touchscreen Lever (YRL220-ZB)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-lever-yrl220)
+* [Yale Touchscreen Deadbolt (YRD220-HA))](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-deadbolt-yrd220)
+* [Yale Key Free Touchscreen Deadbolt (YRD240-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-key-free-touchscreen-deadbolt-yrd240)
+* [Yale Push Button Lever Lock (YRL210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-lever-lock-yrl210)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Lock** - allows for the control of a lock device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Yale Push Button Deadbolt (YRD210-HA) is a Zigbee device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+ * __122min__ checkInterval
+
+## Battery Specification
+
+Four AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Yale Locks Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205138400)

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -24,6 +24,7 @@ import physicalgraph.zigbee.zcl.DataType
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
@@ -83,6 +84,9 @@ def uninstalled() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
                                   DataType.ENUM8, 0, 3600, null) +
@@ -92,6 +96,13 @@ def configure() {
     return refresh() + cmds // send refresh cmds as part of config
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE)
+}
+
 def refresh() {
     def cmds =
         zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
 		capability "Actuator"
 		capability "Color Control"

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,6 +78,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -79,6 +79,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,6 +68,11 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,11 +25,13 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
+		capability "Health Check"
 		capability "Light"
 
 		command "reset"
 
 		fingerprint inClusters: "0x26,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"001B", deviceJoinName: "Aeon Labs Micro Smart Dimmer 2E"
 	}
 
 	simulator {
@@ -98,7 +100,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	response(refresh())
 }
 
@@ -163,6 +173,14 @@ def poll() {
 	], 1000)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -74,6 +74,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -51,7 +51,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 */
 
 metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/zwave-siren.src/README.md

@@ -1,42 +0,0 @@
-# Z-wave Siren
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Switch** - can detect state (possible values: on/off)
-
-## Device Health
-
-FortrezZ Siren Strobe Alarm is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
-		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -28,7 +27,6 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
-		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -60,11 +58,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -126,13 +119,6 @@ def both() {
 	on()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,7 +53,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -61,6 +61,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -65,6 +65,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -124,6 +124,11 @@ metadata {
 	}
 }
 
+def installed(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-virtual-momentary-contact-switch.src/zwave-virtual-momentary-contact-switch.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-07
  */
 metadata {
-	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Refresh"

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"

devicetypes/waymirenet/trane-xl624-thermostat.src/trane-xl624-thermostat.groovy

@@ -0,0 +1,568 @@
+/* TraneXL624.device.groovy
+ *
+ * Variation of the stock SmartThings "Zwave-Thermostat" & Better-Thermostat by todd@wackford.net
+ *
+ *
+ *
+ * Original Modified Code:
+ * twack@wackware.net
+ * 20140209
+ *
+ * Modified to add Humidity & Clock Set
+ * Justin Waymire
+ * justin@waymirenet.com
+ * 04-01-15
+ *
+*/
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Trane XL624 Thermostat", author: "justin@waymirenet.com") {
+    	capability "Relative Humidity Measurement"
+		capability "Temperature Measurement"
+		capability "Refresh"
+		capability "Thermostat"
+		capability "Configuration"
+		capability "Polling"
+
+		command "heatLevelUp"
+		command "heatLevelDown"
+		command "coolLevelUp"
+		command "coolLevelDown"
+		command "switchMode"
+		command "switchFanMode"
+	}
+
+	// simulator metadata
+	simulator {
+		status "off"			: "command: 4003, payload: 00"
+		status "heat"			: "command: 4003, payload: 01"
+		status "cool"			: "command: 4003, payload: 02"
+		status "auto"			: "command: 4003, payload: 03"
+		status "emergencyHeat"	: "command: 4003, payload: 04"
+
+		status "fanAuto"		: "command: 4403, payload: 00"
+		status "fanOn"			: "command: 4403, payload: 01"
+		status "fanCirculate"	: "command: 4403, payload: 06"
+
+		status "heat 60"        : "command: 4303, payload: 01 01 3C"
+		status "heat 68"        : "command: 4303, payload: 01 01 44"
+		status "heat 72"        : "command: 4303, payload: 01 01 48"
+
+		status "cool 72"        : "command: 4303, payload: 02 01 48"
+		status "cool 76"        : "command: 4303, payload: 02 01 4C"
+		status "cool 80"        : "command: 4303, payload: 02 01 50"
+
+		status "temp 58"        : "command: 3105, payload: 01 22 02 44"
+		status "temp 62"        : "command: 3105, payload: 01 22 02 6C"
+		status "temp 70"        : "command: 3105, payload: 01 22 02 BC"
+		status "temp 74"        : "command: 3105, payload: 01 22 02 E4"
+		status "temp 78"        : "command: 3105, payload: 01 22 03 0C"
+		status "temp 82"        : "command: 3105, payload: 01 22 03 34"
+
+		status "idle"			: "command: 4203, payload: 00"
+		status "heating"		: "command: 4203, payload: 01"
+		status "cooling"		: "command: 4203, payload: 02"
+		status "fan only"		: "command: 4203, payload: 03"
+		status "pending heat"	: "command: 4203, payload: 04"
+		status "pending cool"	: "command: 4203, payload: 05"
+		status "vent economizer": "command: 4203, payload: 06"
+
+		// reply messages
+		reply "2502": "command: 2503, payload: FF"
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:'F',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+        valueTile("humidity", "device.humidity", inactiveLabel: false, decoration: "flat") { 
+			state "humidity", label:'Humidity ${currentValue}%', backgroundColor:"#ffffff"
+		}
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+			state "off", label:'', action:"switchMode", icon:"st.thermostat.heating-cooling-off"
+			state "heat", label:'', action:"switchMode", icon:"st.thermostat.heat"
+			state "emergencyHeat", label:'', action:"switchMode", icon:"st.thermostat.emergency-heat"
+			state "cool", label:'', action:"switchMode", icon:"st.thermostat.cool"
+			state "auto", label:'', action:"switchMode", icon:"st.thermostat.auto"
+		}
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'', action:"switchFanMode", icon:"st.thermostat.fan-auto"
+			state "fanOn", label:'', action:"switchFanMode", icon:"st.thermostat.fan-on"
+			state "fanCirculate", label:'  ', action:"switchFanMode", icon:"st.thermostat.fan-circulate"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue}° heat', unit:"F", backgroundColor:"#ffffff"
+		}
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue}° cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"polling.poll", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'  ', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+        standardTile("heatLevelUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+                        state "heatLevelUp", label:'  ', action:"heatLevelUp", icon:"st.thermostat.thermostat-up"
+        }
+        standardTile("heatLevelDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+                        state "heatLevelDown", label:'  ', action:"heatLevelDown", icon:"st.thermostat.thermostat-down"
+        }
+        standardTile("coolLevelUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+                        state "coolLevelUp", label:'  ', action:"coolLevelUp", icon:"st.thermostat.thermostat-up"
+        }
+        standardTile("coolLevelDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+                        state "coolLevelDown", label:'  ', action:"coolLevelDown", icon:"st.thermostat.thermostat-down"
+        }
+        
+		main (["temperature", "humidity"])
+		details(["temperature", "humidity", "mode", "heatLevelDown", "heatingSetpoint", "heatLevelUp", "coolLevelDown", "coolingSetpoint", "coolLevelUp", "refresh", "configure"])
+	}
+}
+
+def coolLevelUp(){
+    int nextLevel = device.currentValue("coolingSetpoint") + 1
+    
+    if( nextLevel > 99){
+    	nextLevel = 99
+    }
+    log.debug "Setting cool set point up to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+}
+
+def coolLevelDown(){
+    int nextLevel = device.currentValue("coolingSetpoint") - 1
+    
+    if( nextLevel < 50){
+    	nextLevel = 50
+    }
+    log.debug "Setting cool set point down to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+}
+
+def heatLevelUp(){
+    int nextLevel = device.currentValue("heatingSetpoint") + 1
+    
+    if( nextLevel > 90){
+    	nextLevel = 90
+    }
+    log.debug "Setting heat set point up to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+def heatLevelDown(){
+    int nextLevel = device.currentValue("heatingSetpoint") - 1
+    
+    if( nextLevel < 40){
+    	nextLevel = 40
+    }
+    log.debug "Setting heat set point down to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+def parse(String description)
+{
+	def map = createEvent(zwaveEvent(zwave.parse(description, [0x42:1, 0x43:2, 0x31: 3])))
+	if (!map) {
+		return null
+	}
+
+	def result = [map]
+	if (map.isStateChange && map.name in ["heatingSetpoint","coolingSetpoint","thermostatMode"]) {
+		def map2 = [
+			name: "thermostatSetpoint",
+			unit: "F"
+		]
+		if (map.name == "thermostatMode") {
+			updateState("lastTriedMode", map.value)
+			if (map.value == "cool") {
+				map2.value = device.latestValue("coolingSetpoint")
+				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
+			}
+			else {
+				map2.value = device.latestValue("heatingSetpoint")
+				log.info "THERMOSTAT, latest heating setpoint = ${map2.value}"
+			}
+		}
+		else {
+			def mode = device.latestValue("thermostatMode")
+			log.info "THERMOSTAT, latest mode = ${mode}"
+			if ((map.name == "heatingSetpoint" && mode == "heat") || (map.name == "coolingSetpoint" && mode == "cool")) {
+				map2.value = map.value
+				map2.unit = map.unit
+			}
+		}
+		if (map2.value != null) {
+			log.debug "THERMOSTAT, adding setpoint event: $map"
+			result << createEvent(map2)
+		}
+	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
+		updateState("lastTriedFanMode", map.value)
+	}
+	log.debug "Parse returned $result"
+	result
+}
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd)
+{
+	def map = [:]
+	map.value = cmd.scaledValue.toString()
+	map.unit = cmd.scale == 1 ? "F" : "C"
+	map.displayed = false
+	switch (cmd.setpointType) {
+		case 1:
+			map.name = "heatingSetpoint"
+			break;
+		case 2:
+			map.name = "coolingSetpoint"
+			break;
+		default:
+			return [:]
+	}
+	// So we can respond with same format
+	state.size = cmd.size
+	state.scale = cmd.scale
+	state.precision = cmd.precision
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv3.SensorMultilevelReport cmd)
+{
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			// temperature
+			map.value = cmd.scaledSensorValue.toString()
+			map.unit = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			break;
+		case 5:
+			// humidity
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "humidity"
+			break;
+	}
+    map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport cmd)
+{
+	def map = [:]
+	switch (cmd.operatingState) {
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_IDLE:
+			map.value = "idle"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_HEATING:
+			map.value = "heating"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_COOLING:
+			map.value = "cooling"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_FAN_ONLY:
+			map.value = "fan only"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_PENDING_HEAT:
+			map.value = "pending heat"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_PENDING_COOL:
+			map.value = "pending cool"
+			break
+		case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_VENT_ECONOMIZER:
+			map.value = "vent economizer"
+			break
+	}
+	map.name = "thermostatOperatingState"
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd) {
+	def map = [:]
+	switch (cmd.mode) {
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
+			map.value = "off"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+			map.value = "heat"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_AUXILIARY_HEAT:
+			map.value = "emergencyHeat"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_COOL:
+			map.value = "cool"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_AUTO:
+			map.value = "auto"
+			break
+	}
+	map.name = "thermostatMode"
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport cmd) {
+	def map = [:]
+	switch (cmd.fanMode) {
+		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
+			map.value = "fanAuto"
+			break
+		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_LOW:
+			map.value = "fanOn"
+			break
+		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_CIRCULATION:
+			map.value = "fanCirculate"
+			break
+	}
+	map.name = "thermostatFanMode"
+	map.displayed = false
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
+	def supportedModes = ""
+	if(cmd.off) { supportedModes += "off " }
+	if(cmd.heat) { supportedModes += "heat " }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergencyHeat " }
+	if(cmd.cool) { supportedModes += "cool " }
+	if(cmd.auto) { supportedModes += "auto " }
+
+	updateState("supportedModes", supportedModes)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
+	def supportedFanModes = ""
+	if(cmd.auto) { supportedFanModes += "fanAuto " }
+	if(cmd.low) { supportedFanModes += "fanOn " }
+	if(cmd.circulation) { supportedFanModes += "fanCirculate " }
+
+	updateState("supportedFanModes", supportedFanModes)
+}
+
+def updateState(String name, String value) {
+	state[name] = value
+	device.updateDataValue(name, value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	log.debug "Zwave event received: $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.warn "Unexpected zwave command $cmd"
+}
+
+// Command Implementations
+def poll() {
+	delayBetween([
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format(),
+        setClock()
+	], 2300)
+}
+
+private setClock() {	//once a day
+	def nowTime = new Date().time
+	def ageInMinutes = state.lastClockSet ? (nowTime - state.lastClockSet)/60000 : 1440
+    log.debug "Clock set age: ${ageInMinutes} minutes"
+    if (ageInMinutes >= 1440) {
+        log.debug "Setting clock"
+		state.lastClockSet = nowTime
+        def nowCal = Calendar.getInstance(TimeZone.getTimeZone("America/Chicago"));
+		zwave.clockV1.clockSet(hour: nowCal.get(Calendar.HOUR_OF_DAY), minute: nowCal.get(Calendar.MINUTE), weekday: nowCal.get(Calendar.DAY_OF_WEEK)).format()
+    } else "delay 87"
+}
+
+def setHeatingSetpoint(degreesF) {
+	setHeatingSetpoint(degreesF.toDouble())
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	def p = (state.precision == null) ? 1 : state.precision
+	delayBetween([
+		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 1, scale: 1, precision: p, scaledValue: degreesF).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format()
+	])
+}
+
+def setCoolingSetpoint(degreesF) {
+	setCoolingSetpoint(degreesF.toDouble())
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	def p = (state.precision == null) ? 1 : state.precision
+	delayBetween([
+		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 2, scale: 1, precision: p,  scaledValue: degreesF).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format()
+	])
+}
+
+def configure() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format()
+	], 2300)
+}
+
+def modes() {
+	["off", "auto", "emergencyHeat", "heat", "cool"]
+}
+
+def switchMode() {
+	def currentMode = device.currentState("thermostatMode")?.value
+	def lastTriedMode = getDataByName("lastTriedMode") ?: currentMode ?: "off"
+	def supportedModes = getDataByName("supportedModes")
+	def modeOrder = modes()
+	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
+	def nextMode = next(lastTriedMode)
+	if (supportedModes?.contains(currentMode)) {
+		while (!supportedModes.contains(nextMode) && nextMode != "off") {
+			nextMode = next(nextMode)
+		}
+	}
+    log.debug "Switching to mode: ${nextMode}"
+	switchToMode(nextMode)
+}
+
+def switchToMode(nextMode) {
+	def supportedModes = getDataByName("supportedModes")
+	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
+	if (nextMode in modes()) {
+		updateState("lastTriedMode", nextMode)
+		return "$nextMode"()
+	} else {
+		log.debug("no mode method '$nextMode'")
+	}
+}
+
+def switchFanMode() {
+	def currentMode = device.currentState("thermostatFanMode")?.value
+	def lastTriedMode = getDataByName("lastTriedFanMode") ?: currentMode ?: "off"
+	def supportedModes = getDataByName("supportedFanModes") ?: "fanAuto fanOn"
+	def modeOrder = ["fanAuto", "fanCirculate", "fanOn"]
+	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
+	def nextMode = next(lastTriedMode)
+	while (!supportedModes?.contains(nextMode) && nextMode != "fanAuto") {
+		nextMode = next(nextMode)
+	}
+	switchToFanMode(nextMode)
+}
+
+def switchToFanMode(nextMode) {
+	def supportedFanModes = getDataByName("supportedFanModes")
+	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
+
+	def returnCommand
+	if (nextMode == "fanAuto") {
+		returnCommand = fanAuto()
+	} else if (nextMode == "fanOn") {
+		returnCommand = fanOn()
+	} else if (nextMode == "fanCirculate") {
+		returnCommand = fanCirculate()
+	} else {
+		log.debug("no fan mode '$nextMode'")
+	}
+	if(returnCommand) updateState("lastTriedFanMode", nextMode)
+	returnCommand
+}
+
+def getDataByName(String name) {
+	state[name] ?: device.getDataValue(name)
+}
+
+def getModeMap() { [
+	"off": 0,
+	"heat": 1,
+	"cool": 2,
+	"emergency heat": 4
+]}
+
+def setThermostatMode(String value) {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[value]).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def getFanModeMap() { [
+	"auto": 0,
+	"on": 1,
+	"circulate": 6
+]}
+
+def setThermostatFanMode(String value) {
+	delayBetween([
+		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: fanModeMap[value]).format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
+	])
+}
+
+def off() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 0).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def heat() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 1).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def emergencyHeat() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 4).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def cool() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def auto() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 3).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format()
+	])
+}
+
+def fanOn() {
+	delayBetween([
+		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 1).format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
+	])
+}
+
+def fanAuto() {
+	delayBetween([
+		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 0).format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
+	])
+}
+
+def fanCirculate() {
+	delayBetween([
+		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 6).format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
+	])
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -511,6 +511,10 @@ def pollResponse(response, data) {
 			if (ResponseValues) {
         def map = [:]
         ResponseValues.hubs.each {
+        // Device-Watch relies on the Logitech Harmony Cloud to get the Device state.
+        def isAlive = it.value.status
+        def d = getChildDevice("harmony-${it.key}")
+        d?.sendEvent(name: "DeviceWatch-DeviceStatus", value: isAlive!=504? "online":"offline", displayed: false, isStateChange: true)
         if (it.value.message == "OK") {
               map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
               def hub = getChildDevice("harmony-${it.key}")