Modifying 'SmartApps for Switch'

DVCSMP-2570 Adding centralite zigbee button fingerprint

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

smartapps/blingsmartapps/bling-smartapps.src/bling-smartapps.groovy

@@ -0,0 +1,64 @@
+import grails.converters.JSON
+
+/**
+*  JSON API Access App
+*/
+
+definition(
+  name: "Bling_SmartApps",
+  namespace: "BlingSmartApps",
+  author: "Bling",
+  description: "Return things as JSON",
+  category: "My Apps",
+  iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+  iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+  oauth: [displayName: "JSON API", displayLink: ""]
+)
+
+
+preferences {
+  	section("Allow these things to be exposed via JSON...") {
+    	input "switches", "capability.switch", title: "Switches", multiple: true, required: true, hideWhenEmpty: true
+
+    	//input "temperatures", "capability.temperatureMeasurement", title: "Temp Measurements", multiple: true, required: false
+    	//input "contacts", "capability.contactSensor", title: "Open/Closed Devices", multiple: true, required: false
+    	//input "presences", "capability.presenceSensor", title: "Presence Sensors", multiple: true, required: false
+    	//input "motions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
+  	}
+}
+
+mappings {
+ 	path("/things") {
+    	action: [
+      		GET: "listThings"
+    	]
+  	}
+}
+
+def	listThings() {
+	[
+  		switches: switches.collect{device(it,"switch")}
+  		/*
+  		switches: switches.collect{device(it,"switch")},
+  		temperatures: temperatures.collect{device(it,"temperature")},
+  		contacts: contacts.collect{device(it,"contact")},
+  		presences: presences.collect{device(it,"presence")},
+  		motions: motions.collect{device(it,"motion")}
+  		*/
+	]
+}
+
+private device(it, type) {
+	def device_state = [label:it.label, type:type, id:it.id, devtest:it]
+
+	for (attribute in it.supportedAttributes) {
+		device_state."${attribute}" = it.currentValue("${attribute}")
+  	}
+
+  	device_state ? device_state : null
+}
+
+def installed() {}
+
+def updated() {}
+