MSA-1903: Fibaro Dimmer 2

Rolling down staging to master

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -0,0 +1,426 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+//
+// 2017-04-10 - DrZwave (with help from Don Kirker) - changed fingerprint to the new format, lowered the OnTime 
+//              and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+// 2016-10-06 - erocm1231 - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being
+//              reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+// 2016-01-28 - erocm1231 - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers.
+//              Also, added configurationGet and a configurationReport method so that config values can be verified.
+// 2015-12-04 - erocm1231 - added range value to preferences as suggested by @Dela-Rick.
+// 2015-11-26 - erocm1231 - Fixed null condition error when adding as a new device. 
+// 2015-11-24 - erocm1231 - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed 
+//              the device not having its on/off status updated when colors are changed.
+// 2015-11-23 - erocm1231 - Changed the look to match SmartThings v2 devices. 
+// 2015-11-21 - erocm1231 - Made code much more efficient. Also made it compatible when setColor is passed a hex value.
+//              Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, 
+//              Daylight - Energize - Teal, Warm White - Relax - Yellow
+// 2015-11-19 - erocm1231 - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+// 2015-11-18 - erocm1231 - Added to setColor for compatibility with Smart Lighting
+// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
+// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
+// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Actuator"
+	capability "Sensor"
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    capability "Refresh"
+
+	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+	} //end simulator
+
+    
+    tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+				attributeState "statusText", label:'${currentValue}'
+			}
+        }
+
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 65, color: "#a0a0f0"],
+				[value: 70, color: "#e0e050"],
+				[value: 75, color: "#f0d030"], // yellow
+				[value: 80, color: "#fbf020"],
+				[value: 85, color: "#fbdc01"],
+				[value: 90, color: "#fb3a01"],
+				[value: 95, color: "#fb0801"]  // red=hot
+			]
+		}
+
+        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+			//state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"],
+                //lux measurement values
+                [value: 150, color: "#404040"],
+				[value: 300, color: "#808080"],
+				[value: 600, color: "#a0a0a0"],
+				[value: 900, color: "#e0e0e0"]
+			]
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}    
+		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["temperature","motion", "switch"])
+		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
+	}  // end tiles
+    
+	preferences {
+       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
+       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
+       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
+       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
+          [1:"Percent",
+           2:"Lux"])
+  }
+
+} // end metadata
+
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	//log.debug "==> New Zwave Event: ${description}"
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		def cmdData = zwaveEvent(cmd)
+		if (cmdData != [:])
+			result << createEvent(cmdData)
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == "" || lum == null || lum == 1) ? "%" : "LUX"}"
+    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
+	}
+    if (result != [null] && result != []) log.debug "Parse returned ${result}"
+    
+    
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+            if(lum == "" || lum == null || lum == 1) map.unit = "%"
+            else map.unit = "lux"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    if (cmd.value == 0 && device.latestState("color").value != "#ffffff") {
+        sendEvent(name: "color", value: "#ffffff", displayed: true)
+    }
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def updated()
+{
+    log.debug "updated() is being called"
+    
+    def cmds = configure()
+    
+    if (cmds != []) response(cmds)
+}
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value}"
+    def myred
+    def mygreen
+    def myblue
+    def hexValue
+    def cmds = []
+
+    if ( value.level == 1 && value.saturation > 20) {
+		def rgb = huesatToRGB(value.hue as Integer, 100)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if ( value.level > 1 ) {
+		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if (value.hex) {
+		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    }
+    else {
+        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+        mygreen=value.green >=128 ? 255 : 0
+        myblue=value.blue>=128 ? 255 : 0
+    }
+    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
+  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+    // So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    cmds << zwave.basicV1.basicGet().format()
+    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
+    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=60
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 60			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=10
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 10			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+def refresh() {
+	def cmd = []
+    cmd << zwave.switchColorV3.switchColorGet().format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
+    cmd << zwave.basicV1.basicGet().format()
+    delayBetween(cmd, 1000)
+}
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
+	], 100)
+	//log.debug cmd
+	cmd + refresh()
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}
+def rgbToHex(rgb) {
+    def r = hex(rgb.r)
+    def g = hex(rgb.g)
+    def b = hex(rgb.b)
+    def hexColor = "#${r}${g}${b}"
+    
+    hexColor
+}
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/erocm123/fibaro-dimmer-2.src/fibaro-dimmer-2.groovy

@@ -0,0 +1,839 @@
+/**
+ *
+ *  Fibaro Dimmer 2 (US)
+ *   
+ *	github: Eric Maycock (erocm123)
+ *	email: erocmail@gmail.com
+ *	Date: 2016-07-31 8:03PM
+ *	Copyright Eric Maycock
+ *
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+	definition (name: "Fibaro Dimmer 2", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Switch Level"
+		capability "Refresh"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Polling"
+        capability "Energy Meter"
+        capability "Power Meter"
+        capability "Button"
+        capability "Health Check"
+        
+        attribute   "needUpdate", "string"
+
+		fingerprint deviceId: "0x1101", inClusters: "0x72,0x86,0x70,0x85,0x8E,0x26,0x7A,0x27,0x73,0xEF,0x26,0x2B"
+        fingerprint deviceId: "0x1101", inClusters: "0x5E,0x20,0x86,0x72,0x26,0x5A,0x59,0x85,0x73,0x98,0x7A,0x56,0x70,0x31,0x32,0x8E,0x60,0x75,0x71,0x27"
+        
+	}
+    
+    preferences {
+        input description: "Once you change values on this page, the corner of the \"configuration\" icon will change orange until all configuration parameters are updated.", title: "Settings", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		generate_preferences(configuration_model())
+    }
+
+	simulator {
+
+	}
+
+	tiles(scale: 2){
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+            tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+           		attributeState "statusText", label:'${currentValue}'       		
+            }
+	    }
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'${currentValue} W'
+		}
+		valueTile("energy", "device.energy", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'reset kWh', action:"reset"
+		}
+        standardTile("configure", "device.needUpdate", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "NO" , label:'', action:"configuration.configure", icon:"st.secondary.configure"
+            state "YES", label:'', action:"configuration.configure", icon:"https://github.com/erocm123/SmartThingsPublic/raw/master/devicetypes/erocm123/qubino-flush-1d-relay.src/configure@2x.png"
+        }
+
+
+		main "switch"
+		details (["switch", "power", "energy", "refresh", "configure", "reset"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err")) {
+	    result = createEvent(descriptionText:description, isStateChange:true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x84: 1, 0x98: 1, 0x56: 1, 0x60: 3])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('power') && device.currentState('energy')) statusTextmsg = "${device.currentState('power').value} W ${device.currentState('energy').value} kWh"
+    sendEvent(name:"statusText", value:statusTextmsg, displayed:false)
+    
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    logging("BasicReport: $cmd")
+    def events = []
+	if (cmd.value == 0) {
+		events << createEvent(name: "switch", value: "off")
+	} else if (cmd.value == 255) {
+		events << createEvent(name: "switch", value: "on")
+	} else {
+		events << createEvent(name: "switch", value: "on")
+        events << createEvent(name: "switchLevel", value: cmd.value)
+	}
+    
+    def request = update_needed_settings()
+    
+    if(request != []){
+        return [response(commands(request)), events]
+    } else {
+        return events
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sceneactivationv1.SceneActivationSet cmd) {
+    logging("SceneActivationSet: $cmd")
+    logging("sceneId: $cmd.sceneId")
+    logging("dimmingDuration: $cmd.dimmingDuration")
+    logging("Configuration for preference \"Switch Type\" is set to ${settings."20"}")
+    
+    if (settings."20" == "2") {
+        logging("Switch configured as Roller blinds")
+        switch (cmd.sceneId) {
+            // Roller blinds S1
+            case 10: // Turn On (1x click)
+                buttonEvent(1, "pushed")
+            break
+            case 13: // Release
+                buttonEvent(1, "held")
+            break
+            case 14: // 2x click
+                buttonEvent(2, "pushed")
+            break
+            case 17: // Brightening
+                buttonEvent(2, "held")
+            break
+            // Roller blinds S2
+            case 11: // Turn Off
+                buttonEvent(3, "pushed")
+            break
+            case 13: // Release
+                buttonEvent(3, "held")
+            break
+            case 14: // 2x click
+                buttonEvent(4, "pushed")
+            break
+            case 15: // 3x click
+                buttonEvent(5, "pushed")
+            break
+            case 18: // Dimming
+                buttonEvent(4, "held")
+            break
+            default:
+                logging("Unhandled SceneActivationSet: ${cmd}")
+            break
+        }
+    } else if (settings."20" == "1") {
+        logging("Switch configured as Toggle")
+        switch (cmd.sceneId) {
+            // Toggle S1
+            case 10: // Off to On
+                buttonEvent(1, "pushed")
+            break
+            case 11: // On to Off
+                buttonEvent(1, "held")
+            break
+            case 14: // 2x click
+                buttonEvent(2, "pushed")
+            break
+            // Toggle S2
+            case 20: // Off to On
+                buttonEvent(3, "pushed")
+            break
+            case 21: // On to Off
+                buttonEvent(3, "held")
+            break
+            case 24: // 2x click
+                buttonEvent(4, "pushed")
+            break
+            case 25: // 3x click
+                buttonEvent(5, "pushed")
+            break
+            default:
+                logging("Unhandled SceneActivationSet: ${cmd}")
+            break
+        
+        }
+    } else {
+        if (settings."20" == "0") logging("Switch configured as Momentary") else logging("Switch type not configured") 
+        switch (cmd.sceneId) {
+            // Momentary S1
+            case 16: // 1x click
+                buttonEvent(1, "pushed")
+            break
+            case 14: // 2x click
+                buttonEvent(2, "pushed")
+            break
+            case 12: // held
+                buttonEvent(1, "held")
+            break
+            case 13: // release
+                buttonEvent(2, "held")
+            break
+            // Momentary S2
+            case 26: // 1x click
+                buttonEvent(3, "pushed")
+            break
+            case 24: // 2x click
+                buttonEvent(4, "pushed")
+            break
+            case 25: // 3x click
+                buttonEvent(5, "pushed")
+            break
+            case 22: // held
+                buttonEvent(3, "held")
+            break
+            case 23: // release
+                buttonEvent(4, "held")
+            break
+            default:
+                logging("Unhandled SceneActivationSet: ${cmd}")
+            break
+        }
+    }  
+}
+
+def buttonEvent(button, value) {
+    logging("buttonEvent() Button:$button, Value:$value")
+	createEvent(name: "button", value: value, data: [buttonNumber: button], descriptionText: "$device.displayName button $button was $value", isStateChange: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
+	logging(cmd)
+	dimmerEvents(cmd)
+}
+
+def dimmerEvents(physicalgraph.zwave.Command cmd) {
+	logging(cmd)
+	def result = []
+	def value = (cmd.value ? "on" : "off")
+	def switchEvent = createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")
+	result << switchEvent
+	if (cmd.value) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
+	}
+	if (switchEvent.isStateChange) {
+		result << response(["delay 3000", zwave.meterV2.meterGet(scale: 2).format()])
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
+	logging("AssociationReport $cmd")
+    state."association${cmd.groupingIdentifier}" = cmd.nodeId[0]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x84: 1])
+	if (encapsulatedCommand) {
+		state.sec = 1
+		def result = zwaveEvent(encapsulatedCommand)
+		result = result.collect {
+			if (it instanceof physicalgraph.device.HubAction && !it.toString().startsWith("9881")) {
+				response(cmd.CMD + "00" + it.toString())
+			} else {
+				it
+			}
+		}
+		result
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = [0x31: 5, 0x30: 1, 0x9C: 1, 0x70: 2, 0x85: 2]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+    logging("Unhandled Z-Wave Event: $cmd")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
+	logging(cmd)
+	if (cmd.meterType == 1) {
+		if (cmd.scale == 0) {
+			return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+		} else if (cmd.scale == 1) {
+			return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
+		} else if (cmd.scale == 2) {
+			return createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+		} else {
+			return createEvent(name: "electric", value: cmd.scaledMeterValue, unit: ["pulses", "V", "A", "R/Z", ""][cmd.scale - 3])
+		}
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+    logging("SensorMultilevelReport: $cmd")
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 4:
+			map.name = "power"
+            map.value = cmd.scaledSensorValue.toInteger().toString()
+            map.unit = cmd.scale == 1 ? "Btu/h" : "W"
+            break
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	createEvent(map)
+}
+
+def on() {
+	commands([zwave.basicV1.basicSet(value: 0xFF), zwave.basicV1.basicGet()])
+}
+
+def off() {
+	commands([zwave.basicV1.basicSet(value: 0x00), zwave.basicV1.basicGet()])
+}
+
+def refresh() {
+   	logging("$device.displayName refresh()")
+
+    def cmds = []
+    if (state.lastRefresh != null && now() - state.lastRefresh < 5000) {
+        logging("Refresh Double Press")
+        def configuration = parseXml(configuration_model())
+        configuration.Value.each
+        {
+            if ( "${it.@setting_type}" == "zwave" ) {
+                cmds << zwave.configurationV1.configurationGet(parameterNumber: "${it.@index}".toInteger())
+            }
+        } 
+        cmds << zwave.firmwareUpdateMdV2.firmwareMdGet()
+    } else {
+        cmds << zwave.meterV2.meterGet(scale: 0)
+        cmds << zwave.meterV2.meterGet(scale: 2)
+	    cmds << zwave.basicV1.basicGet()
+    }
+
+    state.lastRefresh = now()
+    
+    commands(cmds)
+}
+
+def ping() {
+   	logging("$device.displayName ping()")
+
+    def cmds = []
+
+    cmds << zwave.meterV2.meterGet(scale: 0)
+    cmds << zwave.meterV2.meterGet(scale: 2)
+	cmds << zwave.basicV1.basicGet()
+
+    commands(cmds)
+}
+
+def setLevel(level) {
+	if(level > 99) level = 99
+    if(level < 1) level = 1
+    def cmds = []
+    cmds << zwave.basicV1.basicSet(value: level)
+    cmds << zwave.switchMultilevelV1.switchMultilevelGet()
+    
+	commands(cmds)
+}
+
+def updated()
+{
+    state.enableDebugging = settings.enableDebugging
+    logging("updated() is being called")
+    sendEvent(name: "checkInterval", value: 2 * 30 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+    state.needfwUpdate = ""
+    
+    def cmds = update_needed_settings()
+    
+    sendEvent(name:"needUpdate", value: device.currentValue("needUpdate"), displayed:false, isStateChange: true)
+    
+    response(commands(cmds))
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=1500) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def generate_preferences(configuration_model)
+{
+    def configuration = parseXml(configuration_model)
+   
+    configuration.Value.each
+    {
+        switch(it.@type)
+        {   
+            case ["byte","short","four"]:
+                input "${it.@index}", "number",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    range: "${it.@min}..${it.@max}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+            case "list":
+                def items = []
+                it.Item.each { items << ["${it.@value}":"${it.@label}"] }
+                input "${it.@index}", "enum",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}",
+                    options: items
+            break
+            case "decimal":
+               input "${it.@index}", "decimal",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    range: "${it.@min}..${it.@max}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+            case "boolean":
+               input "${it.@index}", "boolean",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+        }  
+    }
+}
+
+
+def update_current_properties(cmd)
+{
+    def currentProperties = state.currentProperties ?: [:]
+    
+    currentProperties."${cmd.parameterNumber}" = cmd.configurationValue
+
+    if (settings."${cmd.parameterNumber}" != null)
+    {
+        if (settings."${cmd.parameterNumber}".toInteger() == convertParam("${cmd.parameterNumber}".toInteger(), cmd2Integer(cmd.configurationValue)))
+        {
+            sendEvent(name:"needUpdate", value:"NO", displayed:false, isStateChange: true)
+        }
+        else
+        {
+            sendEvent(name:"needUpdate", value:"YES", displayed:false, isStateChange: true)
+        }
+    }
+
+    state.currentProperties = currentProperties
+}
+
+def update_needed_settings()
+{
+    def cmds = []
+    def currentProperties = state.currentProperties ?: [:]
+     
+    def configuration = parseXml(configuration_model())
+    def isUpdateNeeded = "NO"
+    
+    if(!state.needfwUpdate || state.needfwUpdate == ""){
+       logging("Requesting device firmware version")
+       cmds << zwave.firmwareUpdateMdV2.firmwareMdGet()
+    }   
+    if(!state.association1 || state.association1 == "" || state.association1 == "1"){
+       logging("Setting association group 1")
+       cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId)
+       cmds << zwave.associationV2.associationGet(groupingIdentifier:1)
+    }
+    if(!state.association2 || state.association2 == "" || state.association1 == "2"){
+       logging("Setting association group 2")
+       cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId)
+       cmds << zwave.associationV2.associationGet(groupingIdentifier:2)
+    }
+   
+    configuration.Value.each
+    {     
+        if ("${it.@setting_type}" == "zwave"){
+            if (currentProperties."${it.@index}" == null)
+            {
+                if (device.currentValue("currentFirmware") == null || "${it.@fw}".indexOf(device.currentValue("currentFirmware")) >= 0){
+                    isUpdateNeeded = "YES"
+                    logging("Current value of parameter ${it.@index} is unknown")
+                    cmds << zwave.configurationV1.configurationGet(parameterNumber: it.@index.toInteger())
+                }
+            }
+            else if (settings."${it.@index}" != null && convertParam(it.@index.toInteger(), cmd2Integer(currentProperties."${it.@index}")) != settings."${it.@index}".toInteger())
+            { 
+                if (device.currentValue("currentFirmware") == null || "${it.@fw}".indexOf(device.currentValue("currentFirmware")) >= 0){
+                    isUpdateNeeded = "YES"
+
+                    logging("Parameter ${it.@index} will be updated to " + settings."${it.@index}")
+                    def convertedConfigurationValue = convertParam(it.@index.toInteger(), settings."${it.@index}".toInteger())
+                    cmds << zwave.configurationV1.configurationSet(configurationValue: integer2Cmd(convertedConfigurationValue, it.@byteSize.toInteger()), parameterNumber: it.@index.toInteger(), size: it.@byteSize.toInteger())
+                    cmds << zwave.configurationV1.configurationGet(parameterNumber: it.@index.toInteger())
+                }
+            } 
+        }
+    }
+    
+    sendEvent(name:"needUpdate", value: isUpdateNeeded, displayed:false, isStateChange: true)
+    return cmds
+}
+
+/**
+* Convert 1 and 2 bytes values to integer
+*/
+def cmd2Integer(array) { 
+
+switch(array.size()) {
+	case 1:
+		array[0]
+    break
+	case 2:
+    	((array[0] & 0xFF) << 8) | (array[1] & 0xFF)
+    break
+    case 3:
+    	((array[0] & 0xFF) << 16) | ((array[1] & 0xFF) << 8) | (array[2] & 0xFF)
+    break
+	case 4:
+    	((array[0] & 0xFF) << 24) | ((array[1] & 0xFF) << 16) | ((array[2] & 0xFF) << 8) | (array[3] & 0xFF)
+	break
+    }
+}
+
+def integer2Cmd(value, size) {
+	switch(size) {
+	case 1:
+		[value]
+    break
+	case 2:
+    	def short value1   = value & 0xFF
+        def short value2 = (value >> 8) & 0xFF
+        [value2, value1]
+    break
+    case 3:
+    	def short value1   = value & 0xFF
+        def short value2 = (value >> 8) & 0xFF
+        def short value3 = (value >> 16) & 0xFF
+        [value3, value2, value1]
+    break
+	case 4:
+    	def short value1 = value & 0xFF
+        def short value2 = (value >> 8) & 0xFF
+        def short value3 = (value >> 16) & 0xFF
+        def short value4 = (value >> 24) & 0xFF
+		[value4, value3, value2, value1]
+	break
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+     update_current_properties(cmd)
+     logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.firmwareupdatemdv2.FirmwareMdReport cmd){
+    logging("Firmware Report ${cmd.toString()}")
+    def firmwareVersion
+    switch(cmd.checksum){
+       case "3281":
+          firmwareVersion = "3.08"
+       break;
+       default:
+          firmwareVersion = cmd.checksum
+    }
+    state.needfwUpdate = "false"
+    updateDataValue("firmware", firmwareVersion.toString())
+    createEvent(name: "currentFirmware", value: firmwareVersion)
+}
+
+def configure() {
+    state.enableDebugging = settings.enableDebugging
+    logging("Configuring Device For SmartThings Use")
+    def cmds = []
+
+    cmds = update_needed_settings()
+    
+    if (cmds != []) commands(cmds)
+}
+
+def convertParam(number, value) {
+	switch (number){
+    	case 201:
+        	if (value < 0)
+            	256 + value
+        	else if (value > 100)
+            	value - 256
+            else
+            	value
+        break
+        case 202:
+        	if (value < 0)
+            	256 + value
+        	else if (value > 100)
+            	value - 256
+            else
+            	value
+        break
+        case 203:
+            if (value < 0)
+            	65536 + value
+        	else if (value > 1000)
+            	value - 65536
+            else
+            	value
+        break
+        case 204:
+        	if (value < 0)
+            	256 + value
+        	else if (value > 100)
+            	value - 256
+            else
+            	value
+        break
+        default:
+        	value
+        break
+    }
+}
+
+private def logging(message) {
+    if (state.enableDebugging == null || state.enableDebugging == "true") log.debug "$message"
+}
+
+
+def configuration_model()
+{
+'''
+<configuration>
+  <Value type="byte" byteSize="1" index="1" label="Minimum brightness level" min="1" max="98" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+(parameter is set automatically during the calibration process)
+The parameter can be changed manually after the calibration.
+Range: 1~98
+Default: 1
+    </Help>
+  </Value>
+  <Value type="byte" byteSize="1" index="2" label="Maximum brightness level" min="2" max="99" value="99" setting_type="zwave" fw="3.08">
+    <Help>
+(parameter is set automatically during the calibration process)
+The parameter can be changed manually after the calibration.
+Range: 2~99
+Default: 99
+    </Help>
+  </Value>
+  <Value type="byte" byteSize="1" index="5" label="Automatic control - dimming step size" min="1" max="99" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter defines the percentage value of dimming step during the automatic control.
+Range: 1~99
+Default: 1
+    </Help>
+  </Value>
+    <Value type="short" byteSize="2" index="6" label="Automatic control - time of a dimming step" min="0" max="255" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter defines the time of single dimming step set in parameter 5 during the automatic control.
+Range: 0~255
+Default: 1
+    </Help>
+  </Value>
+  <Value type="byte" byteSize="1" index="7" label="Manual control - dimming step size" min="1" max="99" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter defines the percentage value of dimming step during the manual control.
+Range: 1~99
+Default: 1
+    </Help>
+  </Value>
+    <Value type="short" byteSize="2" index="8" label="Manual control - time of a dimming step" min="0" max="255" value="5" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter defines the time of single dimming step set in parameter 7 during the manual control.
+Range: 0~255
+Default: 5
+    </Help>
+  </Value>
+    <Value type="list" byteSize="1" index="9" label="State of the device after a power failure" min="0" max="1" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+The Dimmer 2 will return to the last state before power failure.
+0 - the Dimmer 2 does not save the state before a power failure, it returns to the "off" position
+1 - the Dimmer 2 restores its state before power failure
+Range: 0~1
+Default: 1
+    </Help>
+        <Item label="Off" value="0" />
+        <Item label="Previous State" value="1" />
+  </Value>
+  <Value type="short" byteSize="2" index="10" label="Timer functionality (auto - off)" min="0" max="32767" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter allows to automatically switch off the device after specified time (seconds) from switching on the light source.
+Range: 1~32767
+Default: 0
+    </Help>
+  </Value>
+  <Value type="byte" byteSize="1" index="19" label="Forced switch on brightness level" min="0" max="99" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+If the parameter is active, switching on the Dimmer 2 (S1 single click) will always set this brightness level.
+Range: 0~99
+Default: 0
+    </Help>
+  </Value>
+    <Value type="list" byteSize="1" index="20" label="Switch type" min="0" max="2" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+Choose between momentary, toggle and roller blind switch.
+Range: 0~2
+Default: 0
+    </Help>
+    <Item label="Momentary" value="0" />
+    <Item label="Toggle" value="1" />
+    <Item label="Roller Blind" value="2" />
+  </Value>
+      <Value type="list" byteSize="1" index="22" label="Assign toggle switch status to the device status " min="0" max="1" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+By default each change of toggle switch position results in action of Dimmer 2 (switch on/off) regardless the physical connection of contacts.
+0 - device changes status on switch status change
+1 - device status is synchronized with switch status 
+Range: 0~1
+Default: 0
+    </Help>
+    <Item label="Default" value="0" />
+    <Item label="Synchronized" value="1" />
+  </Value>
+  <Value type="list" byteSize="1" index="23" label="Double click option" min="0" max="1" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+set the brightness level to MAX
+Range: 0~1
+Default: 1
+    </Help>
+    <Item label="Disabled" value="0" />
+    <Item label="Enabled" value="1" />
+  </Value>
+    <Value type="list" byteSize="1" index="26" label="The function of 3-way switch" min="0" max="1" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+Switch no. 2 controls the Dimmer 2 additionally (in 3-way switch mode). Function disabled for parameter 20 set to 2 (roller blind switch). 
+Range: 0~1
+Default: 0
+    </Help>
+    <Item label="Disabled" value="0" />
+    <Item label="Enabled" value="1" />
+  </Value>
+  <Value type="list" byteSize="1" index="28" label="Scene activation functionality" min="0" max="1" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+SCENE ID depends on the switch type configurations. 
+Range: 0~1
+Default: 0
+    </Help>
+    <Item label="Disabled" value="0" />
+    <Item label="Enabled" value="1" />
+  </Value>
+  <Value type="list" byteSize="1" index="29" label="Switch functionality of S1 and S2" min="0" max="1" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter allows for switching the role of keys connected to S1 and S2 without changes in connection. 
+Range: 0~1
+Default: 0
+    </Help>
+    <Item label="Standard" value="0" />
+    <Item label="Switched" value="1" />
+  </Value>
+    <Value type="list" byteSize="1" index="35" label="Auto-calibration after power on" min="0" max="4" value="1" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter determines the trigger of auto-calibration procedure, e.g. power on, load error, etc.
+0 - No auto-calibration of the load after power on
+1 - Auto-calibration performed after first power on
+2 - Auto-calibration performed after each power on
+3 - Auto-calibration performed after first power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent)
+4 - Auto-calibration performed after each power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent) 
+Range: 0~4
+Default: 1
+    </Help>
+    <Item label="0" value="0" />
+    <Item label="1" value="1" />
+    <Item label="2" value="2" />
+    <Item label="3" value="3" />
+    <Item label="4" value="4" />
+  </Value>
+<Value type="short" byteSize="2" index="39" label="Max Power load" min="0" max="350" value="250" setting_type="zwave" fw="3.08">
+    <Help>
+This parameter defines the maximum load for a dimmer.
+Range: 0~350
+Default: 250
+    </Help>
+  </Value>
+    <Value type="byte" byteSize="1" index="50" label="Active power reports" min="0" max="100" value="10" setting_type="zwave" fw="3.08">
+    <Help>
+The parameter defines the power level change that will result in a new power report being sent. The value is a percentage of the previous report.
+Range: 0~100
+Default: 10
+    </Help>
+  </Value>
+    <Value type="short" byteSize="2" index="52" label="Periodic active power and energy reports" min="0" max="32767" value="3600" setting_type="zwave" fw="3.08">
+    <Help>
+Parameter 52 defines a time period between consecutive reports. Timer is reset and counted from zero after each report. 
+Range: 0~32767
+Default: 3600
+    </Help>
+  </Value>
+    <Value type="short" byteSize="2" index="53" label="Energy reports" min="0" max="255" value="10" setting_type="zwave" fw="3.08">
+    <Help>
+Energy level change which will result in sending a new energy report.
+Range: 0~255
+Default: 10
+    </Help>
+  </Value>
+    <Value type="list" byteSize="1" index="54" label="Self-measurement" min="0" max="1" value="0" setting_type="zwave" fw="3.08">
+    <Help>
+The Dimmer 2 may include active power and energy consumed by itself in reports sent to the main controller.
+Range: 0~1
+Default: 0
+    </Help>
+    <Item label="Disabled" value="0" />
+    <Item label="Enabled" value="1" />
+  </Value>
+    <Value type="boolean" index="enableDebugging" label="Enable Debug Logging?" value="true" setting_type="preference" fw="3.08">
+    <Help>
+    </Help>
+  </Value>
+</configuration>
+'''
+}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -59,7 +59,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }
@@ -166,4 +166,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -23,9 +23,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer"
 		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -114,9 +114,17 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
+    def cmds = []
+    if (device.getDataValue("manufacturer") == "sengled") {
+        def startLevel = 0xFE
+        if ((device.currentState("level")?.value != null)) {
+            startLevel = Math.round(Integer.parseInt(device.currentState("level").value) * 0xFE / 100)
+        }
+        // Level Control Cluster, command Move to Level, level start level, transition time 0
+        cmds << zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, sprintf("%02X0000", startLevel))
+    }
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    cmds + refresh()
 }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,6 +30,9 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -22,9 +22,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "GE Plug-In Switch"
 		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -52,15 +52,15 @@ definition(
 //Device Inputs
 preferences {
 	section("Allow OpenT2T to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
@@ -80,16 +80,6 @@ def getInputs() {
 
 //API external Endpoints
 mappings {
-	path("/subscriptionURL/:url") {
-		action: [
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action: [
-				PUT: "updateConnectionId"
-		]
-	}
 	path("/devices") {
 		action: [
 				GET: "getDevices"
@@ -105,33 +95,52 @@ mappings {
 				PUT: "updateDevice"
 		]
 	}
-	path("/subscription/:id") {
+	path("/deviceSubscription") {
 		action: [
 				POST: "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
+	path("/locationSubscription") {
+		action: [
+				POST: "registerDeviceGraph",
+				DELETE: "unregisterDeviceGraph"
+		]
+	}
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+	log.debug "Installing with settings: ${settings}"
 	initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+	log.debug "Updating with settings: ${settings}"
+	if(state.deviceSubscriptionMap == null){
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+	if( state.locationSubscriptionMap == null){
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
 	unsubscribe()
-	registerSubscriptions()
+	registerAllDeviceSubscriptions()
 }
 
 def initialize() {
-	state.connectionId = ""
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
-	registerSubscriptions()
+	log.debug "Initializing with settings: ${settings}"
+	state.deviceSubscriptionMap = [:]
+	log.debug "deviceSubscriptionMap created."
+	registerAllDeviceSubscriptions()
+	state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
 }
 
+/*** Subscription Functions  ***/
+
 //Subscribe events for all devices
-def registerSubscriptions() {
+def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
@@ -140,101 +149,195 @@ def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
 		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+			subscribe(myDevice, att.name, deviceEventHandler)
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
 	}
 }
 
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	def theAtts = myDevice.supportedAttributes
 	try {
 		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+			subscribe(myDevice, att.name, deviceEventHandler)
+		}
+		log.info "Subscribing for ${myDevice.displayName}"
+
+		if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
 		}
-		return ["succeed"]
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	return ["succeed"]
 }
 
 //Endpoints function: Unsubscribe to events from a specific device
 def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	try {
-		unsubscribe(myDevice)
-		log.info "Unregistering ${myDevice.displayName}"
-		return ["succeed"]
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+		} else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+		if(state.locationSubscriptionMap[location.id] == null){
+			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+			state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		}
+		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+		return ["succeed"]
+	} else {
+		httpError(400, "missing input parameter: subscriptionURL")
+	}
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+		}else{
+			httpError(400, "missing input parameter: subscriptionURL")
+		}
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
-	def evt_device_id = evt.deviceId
-	def evt_device_value = evt.value
-	def evt_name = evt.name
+def deviceEventHandler(evt) {
 	def evt_device = evt.device
-	def evt_deviceType = getDeviceType(evt_device);
+	def evt_deviceType = getDeviceType(evt_device)
 	def deviceInfo
 
-	if(evt_deviceType == "thermostat")
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
+	def params = [ body: [deviceName: evt_device.displayName, deviceId: evt_device.id,  locationId: location.id] ]
+
+	if(evt.data != null){
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evt_device.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
-	def params = [
-			uri: "${state.endpointURL}/${state.connectionId}",
-			body: [ deviceInfo ]
-	]
-	try {
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evt_device.displayName} is ${state.deviceSubscriptionMap[evt_device.id]}"
+	state.deviceSubscriptionMap[evt_device.id].each {
+		params.uri = "${it}"
 		log.trace "POST URI: ${params.uri}"
 		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
-			resp.headers.each {
-				log.debug "${it.name} : ${it.value}"
+		try{
+			httpPostJson(params) { resp ->
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
 			}
-			log.trace "response status code: ${resp.status}"
-			log.trace "response data: ${resp.data}"
+		} catch (e) {
+			log.error "something went wrong: $e"
 		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
 	}
 }
 
-//Endpoints function: update subcription endpoint url [state.endpoint]
-void updateEndpointURL() {
-	state.endpointURL = params.url
-	log.info "Updated EndpointURL to ${state.endpointURL}"
+def locationEventHandler(evt) {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
+	switch(evt.name){
+		case "DeviceCreated":
+		case "DeviceDeleted":
+			def evt_device = evt.device
+			def evt_deviceType = getDeviceType(evt_device)
+			log.info "DeviceName: ${evt_device.displayName}, DeviceID: ${evt_device.id}, deviceType: ${evt_deviceType}"
+
+			def params = [ body: [ eventType:evt.name, deviceId: evt_device.id, locationId: location.id ] ]
+
+			state.locationSubscriptionMap[location.id].each {
+				params.uri = "${it}"
+				log.trace "POST URI: ${params.uri}"
+				log.trace "Payload: ${params.body}"
+				try{
+					httpPostJson(params) { resp ->
+						log.trace "response status code: ${resp.status}"
+						log.trace "response data: ${resp.data}"
+					}
+				} catch (e) {
+					log.error "something went wrong: $e"
+				}
+			}
+		case "DeviceUpdated":
+		default:
+			break
+	}
 }
 
-//Endpoints function: update global variable [state.connectionId]
-void updateConnectionId() {
-	def connId = params.connId
-	state.connectionId = connId
-	log.info "Updated ConnectionID to ${state.connectionId}"
-}
+
+/*** Device Query/Update Functions  ***/
 
 //Endpoints function: return all device data in json format
 def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat")
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		}
-		else
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -247,14 +350,12 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat")
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
+
 	log.debug "getDevice, return: ${device}"
 	return device
 }
@@ -350,9 +451,6 @@ private getDeviceType(device) {
 					}
 				}
 				break
-			case "contact sensor":
-				deviceType = "contactSensor"
-				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
 				return deviceType
@@ -362,17 +460,15 @@ private getDeviceType(device) {
 			case "video camera":
 				deviceType = "camera"
 				return deviceType
-			case "motion sensor":
-				deviceType = "motionSensor"
-				return deviceType
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
 				return deviceType
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
 			case "water sensor":
-				deviceType = "waterSensor"
+				deviceType = "genericSensor"
 				return deviceType
 			default:
 				break
@@ -387,14 +483,33 @@ private findDevice(deviceId) {
 }
 
 //Return a list of device attributes
-private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute->
+private deviceAttributeList(device, deviceType) {
+	def attributeList = [:]
+	def allAttributes = device.supportedAttributes
+	allAttributes.each { attribute ->
 		try {
-			[ (attribute.name): device.currentValue(attribute.name) ]
+			def currentState = device.currentState(attribute.name)
+			if(currentState != null ){
+				switch(attribute.name){
+					case 'temperature':
+						attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+						break;
+					default:
+						attributeList.putAll([(attribute.name): currentState.value ])
+						break;
+				}
+				if( deviceType == "genericSensor" ){
+					def key = attribute.name + "_lastUpdated"
+					attributeList.putAll([ (key): currentState.isoDate ])
+				}
+			} else {
+				attributeList.putAll([ (attribute.name): null ]);
+			}
 		} catch(e) {
-			[ (attribute.name): null ]
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
+	return attributeList
 }
 
 //Map device command and value. 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -73,7 +73,7 @@ def bridgeDiscovery(params = [:]) {
 	}
 
 	ssdpSubscribe()
-
+	log.trace "bridgeRefreshCount: $bridgeRefreshCount"
 	//bridge discovery request every 15 //25 seconds
 	if ((bridgeRefreshCount % 5) == 0) {
 		discoverBridges()
@@ -207,6 +207,7 @@ def bulbDiscovery() {
 }
 
 private discoverBridges() {
+	log.trace "Sending Hue Discovery message to the hub"
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }