MSA-2073: Multifunction pool control

Rolling down staging to master

devicetypes/bigpunk6/intermatic-pe653-pool-control-system.src/intermatic-pe653-pool-control-system.groovy

@@ -0,0 +1,464 @@
+/**
+ *  Intermatic PE653 Pool Control System
+ *
+ *  Copyright 2014 bigpunk6
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Don't use Cooper Lee's code (vTile_ms, ms_w_vts) he was working on a different implementation than me.
+ *
+ *  Install my device type then use the Multi-Channel Controll App by SmartThings from the Marketplace under the More section.
+ *
+ */
+metadata {
+	definition (name: "Intermatic PE653 Pool Control System", author: "bigpunk6", namespace:  "bigpunk6") {
+        capability "Actuator"
+		capability "Switch"
+		capability "Polling"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Temperature Measurement"
+		capability "Sensor"
+		capability "Zw Multichannel"
+        capability "Thermostat"
+        
+        attribute "operationMode", "string"
+        attribute "firemanTimeout", "string"
+        attribute "temperatureOffsets", "string"
+        attribute "poolspaConfig", "string"
+        attribute "poolSetpoint", "string"
+        attribute "spaSetpoint", "string"
+        attribute "setPoolSetpoint", "string"
+        attribute "pool", "string"
+        attribute "setSpaSetpoint", "string"
+        attribute "spa", "string"
+        
+        command "quickSetPool"
+        command "quickSetSpa"
+		
+		fingerprint deviceId: "0x1001", inClusters: "0x91,0x73,0x72,0x86,0x81,0x60,0x70,0x85,0x25,0x27,0x43,0x31", outClusters: "0x82"
+	}
+    
+    preferences {
+        input "operationMode1", "enum", title: "Boster/Cleaner Pump",
+            options:[1:"No",
+                     2:"Uses Circuit-1",
+                     3:"Variable Speed pump Speed-1",
+                     4:"Variable Speed pump Speed-2",
+                     5:"Variable Speed pump Speed-3",
+                     6:"Variable Speed pump Speed-4"]
+        input "operationMode2", "enum", title: "Pump Type", 
+            options:[0:"1 Speed Pump without Booster/Cleaner",
+                     1:"1 Speed Pump with Booster/Cleaner",
+                     2:"2 Speed Pump without Booster/Cleaner",
+                     3:"2 Speed Pump with Booster/Cleaner"]
+        input "poolSpa1", "enum", title: "Pool or Spa", options:[0:"Pool",1:"Spa",2:"Both"]
+	    input "fireman", "enum", title: "Fireman Timeout",
+            options:["255":"No heater installed",
+                     "0":"No cool down period",
+                     "1":"1 minute",
+                     "2":"2 minute",
+                     "3":"3 minute",
+                     "4":"4 minute",
+                     "5":"5 minute",
+                     "6":"6 minute",
+                     "7":"7 minute",
+                     "8":"8 minute",
+                     "9":"9 minute",
+                     "10":"10 minute",
+                     "11":"11 minute",
+                     "12":"12 minute",
+                     "13":"13 minute",
+                     "14":"14 minute",
+                     "15":"15 minute"]
+        input "tempOffsetwater", "number", title: "Water temperature offset", defaultValue: 0, required: true
+        input "tempOffsetair", "number",
+            title: "Air temperature offset - Sets the Offset of the air temerature for the add-on Thermometer in degrees Fahrenheit -20F to +20F", defaultValue: 0, required: true
+    }
+
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+		reply "8E010101,delay 800,6007": "command: 6008, payload: 4004"
+		reply "8505": "command: 8506, payload: 02"
+		reply "59034002": "command: 5904, payload: 8102003101000000"
+		reply "6007":  "command: 6008, payload: 0002"
+		reply "600901": "command: 600A, payload: 10002532"
+		reply "600902": "command: 600A, payload: 210031"
+	}
+    
+	// tile definitions
+	tiles(scale: 2) {
+        multiAttributeTile(name:"temperature", type: "thermostat", width: 6, height: 4){
+			tileAttribute ("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState "temperature", label:'${currentValue}°',
+					backgroundColors:[
+						[value: 32, color: "#153591"],
+					    [value: 54, color: "#1e9cbb"],
+				    	[value: 64, color: "#90d2a7"],
+				    	[value: 74, color: "#44b621"],
+				    	[value: 90, color: "#f1d801"],
+				    	[value: 98, color: "#d04e00"],
+				    	[value: 110, color: "#bc2323"]
+					]
+			}
+            tileAttribute ("device.poolSetpoint", key: "VALUE_CONTROL") {
+				attributeState "poolSetpoint", action:"quickSetPool"
+			}
+			tileAttribute ("device.spaSetpoint", key: "SECONDARY_CONTROL") {
+				attributeState "spaSetpoint", label:'Spa set to ${currentValue}°F'
+			}
+            
+		}
+        controlTile("poolSliderControl", "device.poolSetpoint", "slider", height: 2, width: 4, inactiveLabel: false, range:"(40..104)") {
+			state "setPoolSetpoint", action:"quickSetPool", backgroundColor:"#d04e00"
+		}
+		valueTile("poolSetpoint", "device.poolSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "pool", label:'${currentValue}° pool', backgroundColor:"#ffffff"
+		}
+		controlTile("spaSliderControl", "device.spaSetpoint", "slider", height: 2, width: 4, inactiveLabel: false, range:"(40..104)") {
+			state "setSpaSetpoint", action:"quickSetSpa", backgroundColor: "#1e9cbb"
+		}
+		valueTile("spaSetpoint", "device.spaSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "spa", label:'${currentValue}° spa', backgroundColor:"#ffffff"
+		}
+        /*valueTile("temperature", "device.temperature") {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 32, color: "#153591"],
+					[value: 54, color: "#1e9cbb"],
+					[value: 64, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 90, color: "#f1d801"],
+					[value: 98, color: "#d04e00"],
+					[value: 110, color: "#bc2323"]
+				]
+			)
+		}*/
+        standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("configure", "device.configure", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+        
+		main "temperature"
+        details(["temperature", "poolSliderControl", "poolSetpoint", "spaSliderControl", "spaSetpoint", "configure", "refresh"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err")) {
+        log.warn "Error in Parse"
+	    result = createEvent(descriptionText:description, isStateChange:true)
+	} else {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25:1, 0x27:1, 0x31:1, 0x43:1, 0x60:3, 0x70:2, 0x81:1, 0x85:1, 0x86: 1, 0x73:1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	log.debug("'$description' parsed to $result")
+	return result
+}
+
+    //Thermostat
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd) {
+	log.debug "ThermostatModeReport $cmd"
+    def map = [:]
+	switch (cmd.mode) {
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+			map.value = "pool"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_FURNACE:
+			map.value = "spa"
+			break
+	}
+	map.name = "thermostatMode"
+	map
+}
+
+def quickSetPool(degrees) {
+    log.debug "quickSetPool $degrees"
+	setPoolSetpoint(degrees, 1000)
+}
+
+def setPoolSetpoint(degrees, delay = 30000) {
+	setPoolSetpoint(degrees.toDouble(), delay)
+}
+
+def setPoolSetpoint(Double degrees, Integer delay = 30000) {
+	log.trace "setPoolSetpoint($degrees, $delay)"
+	def deviceScale = state.scale ?: 1
+	def deviceScaleString = deviceScale == 2 ? "C" : "F"
+    def locationScale = getTemperatureScale()
+	def p = (state.precision == null) ? 1 : state.precision
+
+    def convertedDegrees
+    if (locationScale == "C" && deviceScaleString == "F") {
+    	convertedDegrees = celsiusToFahrenheit(degrees)
+    } else if (locationScale == "F" && deviceScaleString == "C") {
+    	convertedDegrees = fahrenheitToCelsius(degrees)
+    } else {
+    	convertedDegrees = degrees
+    }
+
+	delayBetween([
+		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 1, scale: deviceScale, precision: p, scaledValue: convertedDegrees).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format()
+	], delay)
+}
+
+def quickSetSpa(degrees) {
+	setSpaSetpoint(degrees, 1000)
+}
+
+def setSpaSetpoint(degrees, delay = 30000) {
+	setSpaSetpoint(degrees.toDouble(), delay)
+}
+
+def setSpaSetpoint(Double degrees, Integer delay = 30000) {
+    log.trace "setSpaSetpoint($degrees, $delay)"
+	def deviceScale = state.scale ?: 1
+	def deviceScaleString = deviceScale == 2 ? "C" : "F"
+    def locationScale = getTemperatureScale()
+	def p = (state.precision == null) ? 1 : state.precision
+
+    def convertedDegrees
+    if (locationScale == "C" && deviceScaleString == "F") {
+    	convertedDegrees = celsiusToFahrenheit(degrees)
+    } else if (locationScale == "F" && deviceScaleString == "C") {
+    	convertedDegrees = fahrenheitToCelsius(degrees)
+    } else {
+    	convertedDegrees = degrees
+    }
+
+	delayBetween([
+		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 7, scale: deviceScale, precision: p,  scaledValue: convertedDegrees).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 7).format()
+	], delay)
+}
+
+//Reports
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "configuration: $cmd"
+    def map = [:]
+	map.value = cmd.configurationValue
+	map.displayed = false
+    switch (cmd.parameterNumber) {
+        case 1:
+			map.name = "operationMode"
+			break;
+        case 2:
+			map.name = "firemanTimeout"
+			break;
+        case 3:
+			map.name = "temperatureOffsets"
+			break;
+        case 19:
+			map.name = "poolspaConfig"
+			break;
+		default:
+			return [:]
+	}
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv1.SensorMultilevelReport cmd) {
+    log.debug "Sensor: $cmd"
+    def map = [:]
+    map.value = cmd.scaledSensorValue.toString()
+    map.unit = cmd.scale == 1 ? "F" : "C"
+    map.name = "temperature"
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv1.ThermostatSetpointReport cmd) {
+	def map = [:]
+	map.value = cmd.scaledValue.toString()
+	map.unit = cmd.scale == 1 ? "F" : "C"
+	map.displayed = false
+	switch (cmd.setpointType) {
+		case 1:
+			map.name = "poolSetpoint"
+			break;
+		case 7:
+			map.name = "spaSetpoint"
+			break;
+		default:
+			return [:]
+	}
+	// So we can respond with same format
+	state.size = cmd.size
+	state.scale = cmd.scale
+	state.precision = cmd.precision
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	log.debug "$cmd"
+    if (cmd.value == 0) {
+		createEvent(name: "switch", value: "off")
+	} else if (cmd.value == 255) {
+		createEvent(name: "switch", value: "on")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiInstanceReport cmd) {
+    log.debug "MultiInstanceReport $cmd"
+}
+
+private List loadEndpointInfo() {
+	if (state.endpointInfo) {
+		state.endpointInfo
+	} else if (device.currentValue("epInfo")) {
+		fromJson(device.currentValue("epInfo"))
+	} else {
+		[]
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelEndPointReport cmd) {
+	log.debug "$cmd"
+    updateDataValue("endpoints", cmd.endPoints.toString())
+	if (!state.endpointInfo) {
+		state.endpointInfo = loadEndpointInfo()
+	}
+	if (state.endpointInfo.size() > cmd.endPoints) {
+		cmd.endpointInfo
+	}
+	state.endpointInfo = [null] * cmd.endPoints
+	//response(zwave.associationV2.associationGroupingsGet())
+	[ createEvent(name: "epInfo", value: util.toJson(state.endpointInfo), displayed: false, descriptionText:""),
+	  response(zwave.multiChannelV3.multiChannelCapabilityGet(endPoint: 1)) ]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCapabilityReport cmd) {
+	log.debug "$cmd"
+    def result = []
+	def cmds = []
+	if(!state.endpointInfo) state.endpointInfo = []
+	state.endpointInfo[cmd.endPoint - 1] = cmd.format()[6..-1]
+	if (cmd.endPoint < getDataValue("endpoints").toInteger()) {
+		cmds = zwave.multiChannelV3.multiChannelCapabilityGet(endPoint: cmd.endPoint + 1).format()
+	} else {
+		log.debug "endpointInfo: ${state.endpointInfo.inspect()}"
+	}
+	result << createEvent(name: "epInfo", value: util.toJson(state.endpointInfo), displayed: false, descriptionText:"")
+	if(cmds) result << response(cmds)
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationGroupingsReport cmd) {
+	log.debug "$cmd"
+    state.groups = cmd.supportedGroupings
+	if (cmd.supportedGroupings > 1) {
+		[response(zwave.associationGrpInfoV1.associationGroupInfoGet(groupingIdentifier:2, listMode:1))]
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationgrpinfov1.AssociationGroupInfoReport cmd) {
+	log.debug "$cmd"
+    def cmds = []
+	for (def i = 2; i <= state.groups; i++) {
+		cmds << response(zwave.multiChannelAssociationV2.multiChannelAssociationSet(groupingIdentifier:i, nodeId:zwaveHubNodeId))
+	}
+	cmds
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	log.debug "$cmd"
+    def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		if (state.enabledEndpoints.find { it == cmd.sourceEndPoint }) {
+			def formatCmd = ([cmd.commandClass, cmd.command] + cmd.parameter).collect{ String.format("%02X", it) }.join()
+            createEvent(name: "epEvent", value: "$cmd.sourceEndPoint:$formatCmd", isStateChange: true, displayed: false, descriptionText: "(fwd to ep $cmd.sourceEndPoint)")
+        } else {
+			zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+		}
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+    log.warn "Captured zwave command $cmd"
+	createEvent(descriptionText: "$device.displayName: $cmd", isStateChange: true)
+}
+
+//Commands
+
+def epCmd(Integer ep, String cmds) {
+    log.debug "epCmd: $ep $cmds"
+    if (cmds.contains('2001FF')){
+        log.debug "contained 2001FF"
+        delayBetween([
+            encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF), ep),
+            encap(zwave.switchBinaryV1.switchBinaryGet(), ep)
+	    ], 2300)
+    } else if (cmds.contains('200100')) {
+        log.debug "contained 2001FF"
+        delayBetween([
+            encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0), ep),
+            encap(zwave.switchBinaryV1.switchBinaryGet(), ep)
+	    ], 2300)
+    } else if (cmds.contains('2002')) {
+        encap(zwave.switchBinaryV1.switchBinaryGet(), ep)
+    } else {
+        log.warn "No CMD found"
+    }
+}
+
+def enableEpEvents(enabledEndpoints) {
+	state.enabledEndpoints = enabledEndpoints.split(",").findAll()*.toInteger()
+	null
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	log.debug "command: $cmd"
+    cmd.format()
+}
+
+private encap(cmd, endpoint) {
+	if (endpoint) {
+        command(zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:endpoint, sourceEndPoint: endpoint).encapsulate(cmd))
+	} else {
+		command(cmd)
+	}
+}
+
+def poll() {
+    zwave.sensorMultilevelV1.sensorMultilevelGet().format()
+}
+
+def refresh() {
+	delayBetween([
+    zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format(),
+    zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:2, destinationEndPoint:2, commandClass:37, command:2).format(),
+    zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:3, destinationEndPoint:3, commandClass:37, command:2).format(),
+    zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:4, destinationEndPoint:4, commandClass:37, command:2).format(),
+    zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:5, destinationEndPoint:5, commandClass:37, command:2).format(),
+    zwave.sensorMultilevelV1.sensorMultilevelGet().format(),
+    zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+    zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 7).format(),
+    zwave.configurationV2.configurationGet(parameterNumber: 1).format(),
+    zwave.configurationV2.configurationGet(parameterNumber: 2).format(),
+    zwave.configurationV2.configurationGet(parameterNumber: 3).format(),
+    zwave.configurationV2.configurationGet(parameterNumber: 19).format()
+    ], 3000)
+}
+
+def configure() {
+    def cmds = []
+        cmds << zwave.configurationV2.configurationSet(configurationValue: [operationMode1.toInteger(), operationMode2.toInteger()], parameterNumber: 1, size: 2).format()
+        cmds << zwave.configurationV2.configurationSet(configurationValue: [tempOffsetwater.toInteger(), tempOffsetair.toInteger(), 0, 0], parameterNumber: 3, size: 4).format()
+        cmds << zwave.configurationV2.configurationSet(configurationValue: [poolSpa1.toInteger()], parameterNumber: 19, size: 1).format()
+        cmds << zwave.configurationV2.configurationSet(configurationValue: [fireman.toInteger()], parameterNumber: 2, size: 1).format()
+	delayBetween(cmds, 2500)
+}

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -0,0 +1,34 @@
+# Aeon Labs Key Fob
+
+Cloud Execution
+
+Works with:
+
+* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
+* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -131,6 +133,9 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -0,0 +1,33 @@
+# Aeon Minimote
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
+* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -18,6 +19,7 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -119,5 +121,7 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
+			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -156,47 +156,49 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
-		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-			def isChange = false
+		def supportedThermostatModes = []
-			def isDisplayed = true
+		def thermostatMode = null
+
+		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
-				isChange = isTemperatureStateChange(device, name, value.toString())
+				event << [value: sendValue, unit: temperatureScale]
-				isDisplayed = isChange
-				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				isChange = isStateChange(device, name, value.toString())
+				if (value == true) {
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				}
+				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
+				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
 			}  else if (name=="humidity") {
-				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), displayed: false, unit: "%"]
-				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
 			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
 				event['displayed'] = false
 			} else if (name == "thermostatMode") {
-				def mode = value.toString()
+				thermostatMode = value.toLowerCase()
-				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				return // as we don't want to send this event here, proceed to next name/value pair
-				isChange = isStateChange(device, name, mode)
-				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
-				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString()]
-				isDisplayed = isChange
-				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
 			}
 			sendEvent(event)
 		}
+		if (state.supportedThermostatModes != supportedThermostatModes) {
+			state.supportedThermostatModes = supportedThermostatModes
+			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
+		}
+		if (thermostatMode) {
+			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
+					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
+		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -322,15 +324,7 @@ void resumeProgram() {
 }
 
 def modes() {
-	if (state.modes) {
+	return state.supportedThermostatModes
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
-	else {
-		state.modes = parent.availableModes(this)
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
 }
 
 def fanModes() {
@@ -413,11 +407,13 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
+	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
+	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -453,14 +449,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxHeatOnly()
+	auxheatonly()
 }
 
-def auxHeatOnly() {
+def auxheatonly() {
-	log.debug "auxHeatOnly = emergency heat"
+	log.debug "auxheatonly()"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
+		generateModeEvent("auxheatonly")
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -593,7 +589,7 @@ def generateSetpointEvent() {
 	} else if (mode == "off") {
 		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
+	} else if (mode == "auxheatonly") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
@@ -632,7 +628,7 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
@@ -678,7 +674,7 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
@@ -719,7 +715,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+		if (mode == "heat" || mode == "auxheatonly"){
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -754,7 +750,7 @@ void alterSetpoint(temp) {
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+			if (mode == "heat" || mode == "auxheatonly"){
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
@@ -783,7 +779,7 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat") {
+	if (mode == "heat" || mode == "auxheatonly") {
 		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
 		} else {
@@ -806,8 +802,6 @@ def generateStatusEvent() {
 		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
-		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
 	}

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,15 +300,21 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-	sendEvent(name: "hue", value: value.hue, displayed: false)
+    if(value.hue) {
-	sendEvent(name: "saturation", value: value.saturation, displayed: false)
+        sendEvent(name: "hue", value: value.hue, displayed: false)
-	sendEvent(name: "color", value: value.hex, displayed: false)
+    }
-	if (value.level) {
+    if(value.saturation) {
-		sendEvent(name: "level", value: value.level)
+        sendEvent(name: "saturation", value: value.saturation, displayed: false)
-	}
+    }
-	if (value.switch) {
+    if(value.hex?.trim()) {
-		sendEvent(name: "switch", value: value.switch)
+        sendEvent(name: "color", value: value.hex, displayed: false)
-	}
+    }
+    if (value.level) {
+        sendEvent(name: "level", value: value.level)
+    }
+    if (value.switch?.trim()) {
+        sendEvent(name: "switch", value: value.switch)
+    }
 
     sendRGB(value.rh, value.gh, value.bh)
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -0,0 +1,43 @@
+# ZigBee Button
+
+Cloud Execution
+
+Works with: 
+
+* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Battery** - It defines that the device has a battery
+* **Button** - It defines that a device has one or more buttons
+* **Holdable Button** - It defines that a device has one or more holdable buttons
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - it represents that a Device has attributes.
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __722min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -24,6 +24,7 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
+        capability "Health Check"
 
         command "enrollResponse"
 
@@ -182,6 +183,13 @@ private Map parseNonIasButtonMessage(Map descMap){
     }
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    refresh()
+}
+
 def refresh() {
     log.debug "Refreshing Battery"
 
@@ -190,6 +198,8 @@ def refresh() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device (plus 2 mins lag time)
+    sendEvent(name: "checkInterval", value: 2 * 6 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting, IAS CIE, and Bindings."
     def cmds = []
     if (device.getDataValue("model") == "3450-L") {