MSA-2038: testing the iot devices

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+        url "https://artifactory.smartthings.com/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.9'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'DEV'
+            username = 'Hickory'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'STG'
+            username = 'Dickory'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'PRD'
+            username = 'Dock'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -1,34 +0,0 @@
-# Aeon Labs Key Fob
-
-Cloud Execution
-
-Works with:
-
-* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
-* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -20,7 +19,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -133,9 +131,6 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
-
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -1,33 +0,0 @@
-# Aeon Minimote
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
-* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,7 +18,6 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -121,7 +119,5 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -156,49 +156,47 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
+		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-		def supportedThermostatModes = ["off"]
+			def isChange = false
-		def thermostatMode = null
+			def isDisplayed = true
-
-		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
-				event << [value: sendValue, unit: temperatureScale]
+				isChange = isTemperatureStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				if (value == true) {
+				isChange = isStateChange(device, name, value.toString())
-					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
-				}
-				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
+				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
 			}  else if (name=="humidity") {
-				event << [value: value.toString(), displayed: false, unit: "%"]
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
 			} else if (name == "deviceAlive") {
+				isChange = isStateChange(device, name, value.toString())
+				event['isStateChange'] = isChange
 				event['displayed'] = false
 			} else if (name == "thermostatMode") {
-				thermostatMode = value.toLowerCase()
+				def mode = value.toString()
-				return // as we don't want to send this event here, proceed to next name/value pair
+				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				isChange = isStateChange(device, name, mode)
+				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
-				event << [value: value.toString()]
+				isChange = isStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
 			}
 			sendEvent(event)
 		}
-		if (state.supportedThermostatModes != supportedThermostatModes) {
-			state.supportedThermostatModes = supportedThermostatModes
-			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
-		}
-		if (thermostatMode) {
-			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
-					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
-		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -324,7 +322,15 @@ void resumeProgram() {
 }
 
 def modes() {
-	return state.supportedThermostatModes
+	if (state.modes) {
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
+	else {
+		state.modes = parent.availableModes(this)
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
 }
 
 def fanModes() {
@@ -407,13 +413,11 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
-			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
-			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -449,14 +453,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxheatonly()
+	auxHeatOnly()
 }
 
-def auxheatonly() {
+def auxHeatOnly() {
-	log.debug "auxheatonly()"
+	log.debug "auxHeatOnly = emergency heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxheatonly")
+		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -589,7 +593,7 @@ def generateSetpointEvent() {
 	} else if (mode == "off") {
 		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
-	} else if (mode == "auxheatonly") {
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
@@ -628,7 +632,7 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
@@ -674,7 +678,7 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
@@ -715,7 +719,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxheatonly"){
+		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -750,7 +754,7 @@ void alterSetpoint(temp) {
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxheatonly"){
+			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
@@ -779,7 +783,7 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat" || mode == "auxheatonly") {
+	if (mode == "heat") {
 		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
 		} else {
@@ -802,6 +806,8 @@ def generateStatusEvent() {
 		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
+		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
 	}

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,21 +300,15 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-    if(value.hue) {
+	sendEvent(name: "hue", value: value.hue, displayed: false)
-        sendEvent(name: "hue", value: value.hue, displayed: false)
+	sendEvent(name: "saturation", value: value.saturation, displayed: false)
-    }
+	sendEvent(name: "color", value: value.hex, displayed: false)
-    if(value.saturation) {
+	if (value.level) {
-        sendEvent(name: "saturation", value: value.saturation, displayed: false)
+		sendEvent(name: "level", value: value.level)
-    }
+	}
-    if(value.hex?.trim()) {
+	if (value.switch) {
-        sendEvent(name: "color", value: value.hex, displayed: false)
+		sendEvent(name: "switch", value: value.switch)
-    }
+	}
-    if (value.level) {
-        sendEvent(name: "level", value: value.level)
-    }
-    if (value.switch?.trim()) {
-        sendEvent(name: "switch", value: value.switch)
-    }
 
     sendRGB(value.rh, value.gh, value.bh)
 }

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -35,8 +35,8 @@ metadata {
 
 	// tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -48,8 +48,8 @@ metadata {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
+		main "valve"
-		details(["contact","refresh"])
+		details(["valve","refresh"])
 	}
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,6 +23,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,8 +105,6 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -131,10 +129,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -203,8 +197,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,8 +111,6 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -137,10 +135,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -206,8 +200,7 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,9 +134,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
+
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -230,11 +229,6 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	translateZoneStatus(zs)
-}
-
-private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -319,7 +313,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
+			zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -1,42 +0,0 @@
-# ZigBee Button
-
-Cloud Execution
-
-Works with: 
-
-* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
-* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
-* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - It represents that a device has commands.
-* **Battery** - It defines that the device has a battery
-* **Button** - It defines that a device has one or more buttons
-* **Holdable Button** - It defines that a device has one or more holdable buttons
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - it represents that a Device has attributes.
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-ZigBee Button is marked offline only in the case when Hub is offline.
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-It may also happen that you need to reset the device.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
-* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
-* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,8 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-import groovy.json.JsonOutput
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
@@ -26,7 +24,6 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
-        capability "Health Check"
 
         command "enrollResponse"
 
@@ -252,8 +249,6 @@ def updated() {
 }
 
 def initialize() {
-    // Arrival sensors only goes OFFLINE when Hub is off
-    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -38,8 +38,8 @@ metadata {
     }
 
     tiles(scale: 2) {
-        multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -58,8 +58,8 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["contact"])
+        main(["valve"])
-        details(["contact", "battery", "refresh"])
+        details(["valve", "battery", "refresh"])
     }
 }
 

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -58,7 +58,6 @@ metadata {
 def installed() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	response(refresh())
 }
 
 def updated() {

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -195,10 +195,7 @@ def registerDeviceChange() {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
-				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
-				// For now, we will only have one subscription endpoint per device
-				state.deviceSubscriptionMap.remove(deviceId)
-				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,9 +27,10 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	for (def i=1; i<=8; i++) {
+	page(name: "configureButton1")
-		page(name: "configureButton$i")
+	page(name: "configureButton2")
-	}
+	page(name: "configureButton3")
+	page(name: "configureButton4")
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -59,45 +60,22 @@ def selectButton() {
 	}
 }
 
-def createPage(pageNum) {
-	if ((state.numButton == pageNum) || (pageNum == 8))
-		state.installCondition = true
-	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
-			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
-}
-
 def configureButton1() {
-	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
+	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-	log.debug "state variable numButton: ${state.numButton}"
+		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
-	state.installCondition = false
-	createPage(1)
 }
 def configureButton2() {
-	createPage(2)
+	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
+		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
 }
 
 def configureButton3() {
-	createPage(3)
+	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
+		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
 }
-
 def configureButton4() {
-	createPage(4)
+	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-}
+		install: true, uninstall: true, getButtonSections(4))
-
-def configureButton5() {
-	createPage(5)
-}
-
-def configureButton6() {
-	createPage(6)
-}
-
-def configureButton7() {
-	createPage(7)
-}
-
-def configureButton8() {
-	createPage(8)
 }
 
 def getButtonSections(buttonNumber) {

smartapps/smartthings/json-complete-api.src/json-complete-api.groovy

@@ -0,0 +1,447 @@
+/**
+ *  JSON Complete API
+ *
+ *  Copyright 2017 Paul Lovelace
+ *
+ */
+definition(
+    name: "JSON Complete API",
+    namespace: "smartthings",
+    author: "Ashok Malhotra",
+    description: "API for JSON with complete set of devices",
+    category: "SmartThings Labs",
+    iconUrl:   "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%401.png",
+    iconX2Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%402.png",
+    iconX3Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%403.png",
+    oauth: true)
+
+
+preferences {
+    page(name: "copyConfig")
+}
+
+//When adding device groups, need to add here
+def copyConfig() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+    dynamicPage(name: "copyConfig", title: "Configure Devices", install:true, uninstall:true) {
+        section("Select devices to include in the /devices API call") {
+            paragraph "Version 0.5.5"
+            input "deviceList", "capability.refresh", title: "Most Devices", multiple: true, required: false
+            input "sensorList", "capability.sensor", title: "Sensor Devices", multiple: true, required: false
+            input "switchList", "capability.switch", title: "All Switches", multiple: true, required: false
+            //paragraph "Devices Selected: ${deviceList ? deviceList?.size() : 0}\nSensors Selected: ${sensorList ? sensorList?.size() : 0}\nSwitches Selected: ${switchList ? switchList?.size() : 0}"
+        }
+        section("Configure Pubnub") {
+            input "pubnubSubscribeKey", "text", title: "PubNub Subscription Key", multiple: false, required: false
+            input "pubnubPublishKey", "text", title: "PubNub Publish Key", multiple: false, required: false
+            input "subChannel", "text", title: "Channel (Can be anything)", multiple: false, required: false
+        }
+        section() {
+            paragraph "View this SmartApp's configuration to use it in other places."
+            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
+        }
+ 
+        section() {
+        	paragraph "View the JSON generated from the installed devices."
+            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Device Results", description:"View accessories JSON"
+        }
+        section() {
+        	paragraph "Enter the name you would like shown in the smart app list"
+        	label title:"SmartApp Label (optional)", required: false 
+        }
+    }
+}
+
+def renderDevices() {
+    def deviceData = []
+        deviceList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+        sensorList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+        switchList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+    return deviceData
+}
+
+def findDevice(paramid) {
+	def device = deviceList.find { it.id == paramid }
+  	if (device) return device
+	device = sensorList.find { it.id == paramid }
+	if (device) return device
+  	device = switchList.find { it.id == paramid }
+
+	return device
+ }
+//No more individual device group definitions after here.
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	if(!state.accessToken) {
+         createAccessToken()
+    }
+    registerAll()
+	state.subscriptionRenewed = 0
+    subscribe(location, null, HubResponseEvent, [filterEvents:false])
+    log.debug "0.5.5"
+}
+
+def authError() {
+    [error: "Permission denied"]
+}
+def renderConfig() {
+    def configJson = new groovy.json.JsonOutput().toJson([
+        description: "JSON API",
+        platforms: [
+            [
+                platform: "SmartThings",
+                name: "SmartThings",
+                app_url: apiServerUrl("/api/smartapps/installations/"),
+                app_id: app.id,
+                access_token:  state.accessToken
+            ]
+        ],
+    ])
+
+    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
+    render contentType: "text/plain", data: configString
+}
+def renderLocation() {
+  	[
+    	latitude: location.latitude,
+    	longitude: location.longitude,
+    	mode: location.mode,
+    	name: location.name,
+    	temperature_scale: location.temperatureScale,
+    	zip_code: location.zipCode,
+        hubIP: location.hubs[0].localIP,
+        smartapp_version: '0.5.5'
+  	]
+}
+def CommandReply(statusOut, messageOut) {
+	def replyData =
+    	[
+        	status: statusOut,
+            message: messageOut
+        ]
+
+    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
+    render contentType: "application/json", data: replyJson
+}
+def deviceCommand() {
+	log.info("Command Request")
+	def device = findDevice(params.id)    
+    def command = params.command
+    
+  	if (!device) {
+		log.error("Device Not Found")
+      	CommandReply("Failure", "Device Not Found")
+  	} else if (!device.hasCommand(command)) {
+      	log.error("Device "+device.displayName+" does not have the command "+command)
+      	CommandReply("Failure", "Device "+device.displayName+" does not have the command "+command)
+  	} else {
+      	def value1 = request.JSON?.value1
+      	def value2 = request.JSON?.value2
+      	try {
+      		if (value2) {
+	       		device."$command"(value1,value2)
+	    	} else if (value1) {
+	    		device."$command"(value1)
+	    	} else {
+	    		device."$command"()
+	    	}
+        	log.info("Command Successful for Device "+device.displayName+", Command "+command)
+        	CommandReply("Success", "Device "+device.displayName+", Command "+command)
+      	} catch (e) {
+      		log.error("Error Occurred For Device "+device.displayName+", Command "+command)
+ 	    	CommandReply("Failure", "Error Occurred For Device "+device.displayName+", Command "+command)
+      	}
+  	}
+}
+def deviceAttribute() {
+	def device = findDevice(params.id)    
+    def attribute = params.attribute
+  	if (!device) {
+    	httpError(404, "Device not found")
+  	} else {
+      	def currentValue = device.currentValue(attribute)
+      	[currentValue: currentValue]
+  	}
+}
+def deviceQuery() {
+	def device = findDevice(params.id)    
+    if (!device) { 
+    	device = null
+        httpError(404, "Device not found")
+    } 
+    
+    if (result) {
+    	def jsonData =
+        	[
+         		name: device.displayName,
+            	deviceid: device.id,
+            	capabilities: deviceCapabilityList(device),
+            	commands: deviceCommandList(device),
+            	attributes: deviceAttributeList(device)
+         	]
+    	def resultJson = new groovy.json.JsonOutput().toJson(jsonData)
+    	render contentType: "application/json", data: resultJson
+    }
+}
+def deviceCapabilityList(device) {
+  	def i=0
+  	device.capabilities.collectEntries { capability->
+    	[
+      		(capability.name):1
+    	]
+  	}
+}
+def deviceCommandList(device) {
+  	def i=0
+  	device.supportedCommands.collectEntries { command->
+    	[
+      		(command.name): (command.arguments)
+    	]
+  	}
+}
+def deviceAttributeList(device) {
+  	device.supportedAttributes.collectEntries { attribute->
+    	try {
+      		[
+        		(attribute.name): device.currentValue(attribute.name)
+      		]
+    	} catch(e) {
+      		[
+        		(attribute.name): null
+      		]
+    	}
+  	}
+}
+def getAllData() {
+	//Since we're about to send all of the data, we'll count this as a subscription renewal and clear out pending changes.
+	state.subscriptionRenewed = now()
+    state.devchanges = []
+
+
+	def deviceData =
+    [	location: renderLocation(),
+        deviceList: renderDevices() ]
+    def deviceJson = new groovy.json.JsonOutput().toJson(deviceData)
+    render contentType: "application/json", data: deviceJson
+}
+def startSubscription() {
+//This simply registers the subscription.
+    state.subscriptionRenewed = now()
+	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
+    render contentType: "application/json", data: deviceJson    
+}
+def endSubscription() {
+//Because it takes too long to register for an api command, we don't actually unregister.
+//We simply blank the devchanges and change the subscription renewal to two hours ago.
+	state.devchanges = []
+    state.subscriptionRenewed = 0
+ 	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
+    render contentType: "application/json", data: deviceJson     
+}
+def registerAll() {
+//This has to be done at startup because it takes too long for a normal command.
+	log.debug "Registering All Events"
+    state.devchanges = []
+	registerChangeHandler(deviceList)
+	registerChangeHandler(sensorList)
+	registerChangeHandler(switchList)
+}
+def registerChangeHandler(myList) {
+	myList.each { myDevice ->
+		def theAtts = myDevice.supportedAttributes
+		theAtts.each {att ->
+		    subscribe(myDevice, att.name, changeHandler)
+    	log.debug "Registering ${myDevice.displayName}.${att.name}"
+		}
+	}
+}
+def changeHandler(evt) {
+	//Send to Pubnub if we need to.
+    if (pubnubPublishKey!=null) {
+	    def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+		def changeJson = new groovy.json.JsonOutput().toJson(deviceData)
+		def changeData = URLEncoder.encode(changeJson)
+        def uri = "http://pubsub.pubnub.com/publish/${pubnubPublishKey}/${pubnubSubscribeKey}/0/${subChannel}/0/${changeData}"
+		log.debug "${uri}"
+    	httpGet(uri)
+    }
+  
+  	if (state.directIP!="") {
+    	//Send Using the Direct Mechanism
+        def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+        //How do I control the port?!?
+        log.debug "Sending Update to ${state.directIP}:${state.directPort}"
+        def result = new physicalgraph.device.HubAction(
+    		method: "GET",
+    		path: "/update",
+    		headers: [
+        		HOST: "${state.directIP}:${state.directPort}",
+                change_device: evt.deviceId,
+                change_attribute: evt.name,
+                change_value: evt.value,
+                change_date: evt.date
+    		]
+		)
+        sendHubCommand(result)
+    }
+    
+	//Only add to the state's devchanges if the endpoint has renewed in the last 10 minutes.
+    if (state.subscriptionRenewed>(now()-(1000*60*10))) {
+  		if (evt.isStateChange()) {
+			state.devchanges << [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+      }
+    } else if (state.subscriptionRenewed>0) { //Otherwise, clear it
+    	log.debug "Endpoint Subscription Expired. No longer storing changes for devices."
+        state.devchanges=[]
+        state.subscriptionRenewed=0
+    }
+}
+def getChangeEvents() {
+    //Store the changes so we can swap it out very quickly and eliminate the possibility of losing any.
+    //This is mainly to make this thread safe because I'm willing to bet that a change event can fire
+    //while generating/sending the JSON.
+    def oldchanges = state.devchanges
+    state.devchanges=[]
+    state.subscriptionRenewed = now()
+	if (oldchanges.size()==0) {
+        def deviceJson = new groovy.json.JsonOutput().toJson([status: "None"])
+	    render contentType: "application/json", data: deviceJson    
+    } else {
+    	def changeJson = new groovy.json.JsonOutput().toJson([status: "Success", attributes:oldchanges])
+    	render contentType: "application/json", data: changeJson
+	}
+}
+def enableDirectUpdates() {
+	log.debug("Command Request")
+	state.directIP = params.ip
+    state.directPort = params.port
+	log.debug("Trying ${state.directIP}:${state.directPort}")
+	def result = new physicalgraph.device.HubAction(
+    		method: "GET",
+    		path: "/initial",
+    		headers: [
+        		HOST: "${state.directIP}:${state.directPort}"
+    		],
+    		query: deviceData
+		)
+     sendHubCommand(result)
+}
+
+def HubResponseEvent(evt) {
+	log.debug(evt.description)
+}
+
+def locationHandler(evt) {
+    def description = evt.description
+    def hub = evt?.hubId
+
+    log.debug "cp desc: " + description
+    if (description.count(",") > 4)
+    {
+def bodyString = new String(description.split(',')[5].split(":")[1].decodeBase64())
+log.debug(bodyString)
+}
+}
+
+def getSubscriptionService() {
+	def replyData =
+    	[
+        	pubnub_publishkey: pubnubPublishKey,
+            pubnub_subscribekey: pubnubSubscribeKey,
+            pubnub_channel: subChannel
+        ]
+
+    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
+    render contentType: "application/json", data: replyJson
+}
+
+mappings {
+    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
+        path("/devices")                        { action: [GET: "authError"] }
+        path("/config")                         { action: [GET: "authError"] }
+        path("/location")                       { action: [GET: "authError"] }
+        path("/:id/command/:command")     		{ action: [POST: "authError"] }
+        path("/:id/query")						{ action: [GET: "authError"] }
+        path("/:id/attribute/:attribute") 		{ action: [GET: "authError"] }
+        path("/subscribe")                      { action: [GET: "authError"] }
+        path("/getUpdates")                     { action: [GET: "authError"] }
+        path("/unsubscribe")                    { action: [GET: "authError"] }
+        path("/startDirect/:ip/:port")          { action: [GET: "authError"] }
+        path("/getSubcriptionService")          { action: [GET: "authError"] }
+
+    } else {
+        path("/devices")                        { action: [GET: "getAllData"] }
+        path("/config")                         { action: [GET: "renderConfig"]  }
+        path("/location")                       { action: [GET: "renderLocation"] }
+        path("/:id/command/:command")     		{ action: [POST: "deviceCommand"] }
+        path("/:id/query")						{ action: [GET: "deviceQuery"] }
+        path("/:id/attribute/:attribute") 		{ action: [GET: "deviceAttribute"] }
+        path("/subscribe")                      { action: [GET: "startSubscription"] }
+        path("/getUpdates")                     { action: [GET: "getChangeEvents"] }
+        path("/unsubscribe")                    { action: [GET: "endSubscription"] }
+        path("/startDirect/:ip/:port")          { action: [GET: "enableDirectUpdates"] }
+        path("/getSubcriptionService")          { action: [GET: "getSubscriptionService"] }
+    }
+}