MSA-2068: just for fun.

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -158,7 +158,7 @@ def generateEvent(Map results) {
 	if(results) {
 
 			def linkText = getLinkText(device)
-		def supportedThermostatModes = ["off"]
+		def supportedThermostatModes = []
 		def thermostatMode = null
 
 		results.each { name, value ->

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,8 +105,6 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -131,10 +129,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -203,8 +197,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,8 +111,6 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -137,10 +135,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -206,8 +200,7 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,9 +134,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
+
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -230,11 +229,6 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	translateZoneStatus(zs)
-}
-
-private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -319,7 +313,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
+			zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zigbee-button.src/README.md

@@ -28,8 +28,9 @@ Works with:
 
 ## Device Health
 
-ZigBee Button is marked offline only in the case when Hub is offline.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
 
+* __722min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,8 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-import groovy.json.JsonOutput
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
@@ -185,6 +183,13 @@ private Map parseNonIasButtonMessage(Map descMap){
     }
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    refresh()
+}
+
 def refresh() {
     log.debug "Refreshing Battery"
 
@@ -193,6 +198,8 @@ def refresh() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device (plus 2 mins lag time)
+    sendEvent(name: "checkInterval", value: 2 * 6 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting, IAS CIE, and Bindings."
     def cmds = []
     if (device.getDataValue("model") == "3450-L") {
@@ -252,8 +259,6 @@ def updated() {
 }
 
 def initialize() {
-    // Arrival sensors only goes OFFLINE when Hub is off
-    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -58,7 +58,6 @@ metadata {
 def installed() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	response(refresh())
 }
 
 def updated() {

smartapps/nanoheal/nanoheal-iot.src/nanoheal-iot.groovy

@@ -0,0 +1,89 @@
+/**
+ *  Nanoheal_IoT
+ *
+ *  Copyright 2017 ashoka
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Nanoheal_IoT",
+    namespace: "nanoheal",
+    author: "ashoka",
+    description: "Control IoT Devices.",
+    category: "Fun & Social",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Allow external service to control these things...") {
+		input "switches", "capability.switch", multiple: true, required: true
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+mappings {
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+}
+
+def listSwitches() {
+    def resp = []
+    switches.each {
+      resp << [name: it.displayName, value: it.currentValue("switch")]
+    }
+    return resp
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    // all switches have the command
+    // execute the command on all switches
+    // (note we can do this on the array - the command will be invoked on every element
+    switch(command) {
+        case "on":
+            switches.on()
+            break
+        case "off":
+            switches.off()
+            break
+        default:
+            httpError(400, "$command is not a valid command for all switches specified")
+    }
+}
+// TODO: implement event handlers

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,9 +27,10 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	for (def i=1; i<=8; i++) {
-		page(name: "configureButton$i")
-	}
+	page(name: "configureButton1")
+	page(name: "configureButton2")
+	page(name: "configureButton3")
+	page(name: "configureButton4")
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -59,45 +60,22 @@ def selectButton() {
 	}
 }
 
-def createPage(pageNum) {
-	if ((state.numButton == pageNum) || (pageNum == 8))
-		state.installCondition = true
-	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
-			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
-}
-
 def configureButton1() {
-	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
-	log.debug "state variable numButton: ${state.numButton}"
-	state.installCondition = false
-	createPage(1)
+	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
+		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
 }
 def configureButton2() {
-	createPage(2)
+	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
+		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
 }
 
 def configureButton3() {
-	createPage(3)
+	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
+		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
 }
-
 def configureButton4() {
-	createPage(4)
-}
-
-def configureButton5() {
-	createPage(5)
-}
-
-def configureButton6() {
-	createPage(6)
-}
-
-def configureButton7() {
-	createPage(7)
-}
-
-def configureButton8() {
-	createPage(8)
+	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
+		install: true, uninstall: true, getButtonSections(4))
 }
 
 def getButtonSections(buttonNumber) {