MSA-2140: MQTT Bridge to Home Assistant

Rolling down staging to master

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -Pre-release V2 10/8/2015
+ *  Spruce Sensor -updated with SLP model number 5/2017
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,25 +14,33 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh(?)
+ -remove polling and/or refresh
+ 
+ -------5/2017 Updates--------
+ -Add fingerprints for SLP
+ -add device health, check every 60mins + 2mins
  */
+ 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
+        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
+        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
 	}
 
 	preferences {
@@ -65,7 +73,7 @@ metadata {
 					[value: 64, color: "#44B621"],
 					[value: 80, color: "#3D79D9"],
 					[value: 96, color: "#0A50C2"]
-				]
+				], icon:"st.Weather.weather12"
 		}
         
         valueTile("maxHum", "device.maxHum", canChangeIcon: false, canChangeBackground: false) {
@@ -293,6 +301,11 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
+def installed(){
+	//check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -303,6 +316,8 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
+    //check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -395,4 +410,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -133,8 +133,8 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+	// Device only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
 
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -111,7 +111,6 @@ def configure() {
 	return cmds
 }
 
-
 def installed() {
 	initialize()
 }
@@ -121,7 +120,7 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+	// Device only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -27,13 +27,9 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor 6 is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+Aeon MultiSensor reports in once every hour.
 
-* __32min__ checkInterval
+* __122min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -130,13 +130,13 @@ metadata {
 }
 
 def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 

devicetypes/smartthings/aeon-multisensor-gen5.src/README.md

@@ -27,13 +27,9 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+Aeon MultiSensor Gen5 reports in once every hour.
 
-* __32min__ checkInterval
+* __122min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,12 +100,12 @@ metadata {
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def parse(String description)

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -28,13 +28,9 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+Aeon MultiSensor reports in once every hour.
 
-* __32min__ checkInterval
+* __122min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -96,12 +96,12 @@ metadata {
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 // Parse incoming device messages to generate events

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -6,7 +6,6 @@ metadata {
 		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Battery"
-		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
@@ -15,161 +14,173 @@ metadata {
 
 		command "switchMode"
 		command "switchFanMode"
-		command "quickSetCool"
-		command "quickSetHeat"
+		command "lowerHeatingSetpoint"
+		command "raiseHeatingSetpoint"
+		command "lowerCoolSetpoint"
+		command "raiseCoolSetpoint"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
 		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
-	// simulator metadata
-	simulator {
-		status "off"            : "command: 4003, payload: 00"
-		status "heat"           : "command: 4003, payload: 01"
-		status "cool"           : "command: 4003, payload: 02"
-		status "auto"           : "command: 4003, payload: 03"
-		status "emergencyHeat"  : "command: 4003, payload: 04"
-
-		status "fanAuto"        : "command: 4403, payload: 00"
-		status "fanOn"          : "command: 4403, payload: 01"
-		status "fanCirculate"   : "command: 4403, payload: 06"
-
-		status "heat 60"        : "command: 4303, payload: 01 09 3C"
-		status "heat 72"        : "command: 4303, payload: 01 09 48"
-
-		status "cool 76"        : "command: 4303, payload: 02 09 4C"
-		status "cool 80"        : "command: 4303, payload: 02 09 50"
-
-		status "temp 58"        : "command: 3105, payload: 01 2A 02 44"
-		status "temp 62"        : "command: 3105, payload: 01 2A 02 6C"
-		status "temp 78"        : "command: 3105, payload: 01 2A 03 0C"
-		status "temp 86"        : "command: 3105, payload: 01 2A 03 34"
-
-		status "idle"           : "command: 4203, payload: 00"
-		status "heating"        : "command: 4203, payload: 01"
-		status "cooling"        : "command: 4203, payload: 02"
-
-		// reply messages
-		reply "2502": "command: 2503, payload: FF"
-	}
-
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 32, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 92, color: "#d04e00"],
-					[value: 98, color: "#bc2323"]
-				]
-			)
+		multiAttributeTile(name:"temperature", type:"generic", width:3, height:2, canChangeIcon: true) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temperature", label:'${currentValue}°', icon: "st.alarm.temperature.normal",
+					backgroundColors:[
+							// Celsius
+							[value: 0, color: "#153591"],
+							[value: 7, color: "#1e9cbb"],
+							[value: 15, color: "#90d2a7"],
+							[value: 23, color: "#44b621"],
+							[value: 28, color: "#f1d801"],
+							[value: 35, color: "#d04e00"],
+							[value: 37, color: "#bc2323"],
+							// Fahrenheit
+							[value: 40, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+				)
+			}
+			tileAttribute("device.batteryIcon", key: "SECONDARY_CONTROL") {
+				attributeState "ok_battery", label:'${currentValue}%', icon:"st.arlo.sensor_battery_4"
+				attributeState "low_battery", label:'Low Battery', icon:"st.arlo.sensor_battery_0"
+			}
 		}
-		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "off", label:'${name}', action:"switchMode", nextState:"to_heat"
-			state "heat", label:'${name}', action:"switchMode", nextState:"to_cool"
-			state "cool", label:'${name}', action:"switchMode", nextState:"..."
-			state "auto", label:'${name}', action:"switchMode", nextState:"..."
-			state "emergency heat", label:'${name}', action:"switchMode", nextState:"..."
-			state "to_heat", label: "heat", action:"switchMode", nextState:"to_cool"
-			state "to_cool", label: "cool", action:"switchMode", nextState:"..."
-			state "...", label: "...", action:"off", nextState:"off"
+		standardTile("mode", "device.thermostatMode", width:2, height:2, inactiveLabel: false, decoration: "flat") {
+			state "off", action:"switchMode", nextState:"to_heat", icon: "st.thermostat.heating-cooling-off"
+			state "heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
+			state "auto", action:"switchMode", nextState:"...", icon: "st.thermostat.auto"
+			state "emergency heat", action:"switchMode", nextState:"...", icon: "st.thermostat.emergency-heat"
+			state "to_heat", action:"switchMode", nextState:"to_cool", icon: "st.secondary.secondary"
+			state "to_cool", action:"switchMode", nextState:"...", icon: "st.secondary.secondary"
+			state "...", label: "...", action:"off", nextState:"off", icon: "st.secondary.secondary"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "fanAuto", label:'${name}', action:"switchFanMode"
-			state "fanOn", label:'${name}', action:"switchFanMode"
-			state "fanCirculate", label:'${name}', action:"switchFanMode"
+		standardTile("fanMode", "device.thermostatFanMode", width:2, height:2, inactiveLabel: false, decoration: "flat") {
+			state "auto", action:"switchFanMode", icon: "st.thermostat.fan-auto"
+			state "on", action:"switchFanMode", icon: "st.thermostat.fan-on"
+			state "circulate", action:"switchFanMode", icon: "st.thermostat.fan-circulate"
 		}
-		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#e86d13"
+		valueTile("humidity", "device.humidity", width:2, height:2, inactiveLabel: false, decoration: "flat") {
+			state "humidity", label:'${currentValue}%', icon:"st.Weather.weather12"
 		}
-		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "heat", label:'${currentValue}° heat', backgroundColor:"#ffffff"
+		standardTile("lowerHeatingSetpoint", "device.heatingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpoint", action:"lowerHeatingSetpoint", icon:"st.thermostat.thermostat-left"
 		}
-		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#00a0dc"
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpoint", label:'${currentValue}° heat', backgroundColor:"#ffffff"
 		}
-		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
+		standardTile("raiseHeatingSetpoint", "device.heatingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpoint", action:"raiseHeatingSetpoint", icon:"st.thermostat.thermostat-right"
 		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, decoration: "flat") {
-			state "humidity", label:'${currentValue}% humidity', unit:""
+		standardTile("lowerCoolSetpoint", "device.coolingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "coolingSetpoint", action:"lowerCoolSetpoint", icon:"st.thermostat.thermostat-left"
 		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:""
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "coolingSetpoint", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
-		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+		standardTile("raiseCoolSetpoint", "device.heatingSetpoint", width:2, height:1, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpoint", action:"raiseCoolSetpoint", icon:"st.thermostat.thermostat-right"
+		}
+
+		standardTile("refresh", "device.thermostatMode", width:2, height:2, inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		main "temperature"
-		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh", "humidity", "battery"])
+		details(["temperature", "mode", "fanMode", "humidity", "lowerHeatingSetpoint", "heatingSetpoint", "raiseHeatingSetpoint", "lowerCoolSetpoint", "coolingSetpoint", "raiseCoolSetpoint", "refresh"])
 	}
 }
 
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// If not set update ManufacturerSpecific data
+	if (!getDataValue("manufacturer")) {
+		sendHubCommand(new physicalgraph.device.HubAction(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()))
+	}
+	initialize()
 }
 
 def installed() {
+	// Configure device
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format())
+	cmds << new physicalgraph.device.HubAction(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
+	sendHubCommand(cmds)
+	initialize()
+}
+
+def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Poll device for additional data that will be updated by refresh tile
+	refresh()
 }
 
 def parse(String description)
 {
-	def result = []
+	def result = null
 	if (description == "updated") {
 	} else {
 		def zwcmd = zwave.parse(description, [0x42:2, 0x43:2, 0x31: 2, 0x60: 3])
 		if (zwcmd) {
-			result += zwaveEvent(zwcmd)
+			result = zwaveEvent(zwcmd)
+			// Check battery level at least once every 2 days
+			if (!state.lastbatt || now() - state.lastbatt > 48*60*60*1000) {
+				sendHubCommand(new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format()))
+			}
 		} else {
 			log.debug "$device.displayName couldn't parse $description"
 		}
 	}
 	if (!result) {
-		return null
+		return []
 	}
-	if (result.size() == 1 && (!state.lastbatt || now() - state.lastbatt > 48*60*60*1000)) {
-		result << response(zwave.batteryV1.batteryGet().format())
-	}
-	log.debug "$device.displayName parsed '$description' to $result"
-	result
+	return [result]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	def result = null
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x42:2, 0x43:2, 0x31: 2])
-	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiInstanceCmdEncap cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 3])
+	log.debug ("multiinstancev1.MultiInstanceCmdEncap: command from instance ${cmd.instance}: ${encapsulatedCommand}")
 	if (encapsulatedCommand) {
-		result = zwaveEvent(encapsulatedCommand)
-		if (cmd.sourceEndPoint == 1) {    // indicates a response to refresh() vs an unrequested update
-			def event = ([] + result)[0]  // in case zwaveEvent returns a list
-			def resp = nextRefreshQuery(event?.name)
-			if (resp) {
-				log.debug("sending next refresh query: $resp")
-				result = [] + result + response(["delay 200", resp])
-			}
-		}
+		zwaveEvent(encapsulatedCommand)
 	}
-	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd)
 {
-	def cmdScale = cmd.scale == 1 ? "F" : "C"
-	def temp = convertTemperatureIfNeeded(cmd.scaledValue, cmdScale, cmd.precision)
+	def sendCmd = []
 	def unit = getTemperatureScale()
-	def map1 = [ value: temp, unit: unit, displayed: false ]
+	def cmdScale = cmd.scale == 1 ? "F" : "C"
+	def setpoint = getTempInLocalScale(cmd.scaledValue, cmdScale)
 	switch (cmd.setpointType) {
 		case 1:
-			map1.name = "heatingSetpoint"
+			//map1.name = "heatingSetpoint"
+			sendEvent(name: "heatingSetpoint", value: setpoint, unit: unit, displayed: false)
+			updateThermostatSetpoint("heatingSetpoint", setpoint)
+			// Enforce coolingSetpoint limits, as device doesn't
+			if (setpoint > getTempInLocalScale("coolingSetpoint")) {
+				sendCmd << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointSet(
+						setpointType: 2, scale: cmd.scale, precision: cmd.precision, scaledValue: cmd.scaledValue).format())
+				sendCmd << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
+				sendHubCommand(sendCmd)
+			}
 			break;
 		case 2:
-			map1.name = "coolingSetpoint"
+			//map1.name = "coolingSetpoint"
+			sendEvent(name: "coolingSetpoint", value: setpoint, unit: unit, displayed: false)
+			updateThermostatSetpoint("coolingSetpoint", setpoint)
+			// Enforce heatingSetpoint limits, as device doesn't
+			if (setpoint < getTempInLocalScale("heatingSetpoint")) {
+				sendCmd << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointSet(
+						setpointType: 1, scale: cmd.scale, precision: cmd.precision, scaledValue: cmd.scaledValue).format())
+				sendCmd << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+				sendHubCommand(sendCmd)
+			}
 			break;
 		default:
 			log.debug "unknown setpointType $cmd.setpointType"
@@ -180,33 +191,55 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpo
 	state.size = cmd.size
 	state.scale = cmd.scale
 	state.precision = cmd.precision
-
-	def mode = device.latestValue("thermostatMode")
-	if (mode && map1.name.startsWith(mode) || (mode == "emergency heat" && map1.name == "heatingSetpoint")) {
-		def map2 = [ name: "thermostatSetpoint", value: temp, unit: unit ]
-		[ createEvent(map1), createEvent(map2) ]
-	} else {
-		createEvent(map1)
-	}
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
-{
+// thermostatSetpoint is not displayed by any tile as it can't be predictable calculated due to
+// the device's quirkiness but it is defined by the capability so it must be set, set it to the most likely value
+def updateThermostatSetpoint(setpoint, value) {
+	def scale = getTemperatureScale()
+	def heatingSetpoint = (setpoint == "heatingSetpoint") ? value : getTempInLocalScale("heatingSetpoint")
+	def coolingSetpoint = (setpoint == "coolingSetpoint") ? value : getTempInLocalScale("coolingSetpoint")
+	def mode = device.currentValue("thermostatMode")
+	def thermostatSetpoint = heatingSetpoint    // corresponds to (mode == "heat" || mode == "emergency heat")
+	if (mode == "cool") {
+		thermostatSetpoint = coolingSetpoint
+	}
+	// Just set to average of heating + cooling for mode off and auto
+	if (mode == "off" || mode == "auto") {
+		thermostatSetpoint = getTempInLocalScale((heatingSetpoint + coolingSetpoint)/2, scale)
+	}
+	sendEvent(name: "thermostatSetpoint", value: thermostatSetpoint, unit: scale)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
 		map.name = "temperature"
 		map.unit = getTemperatureScale()
-		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmd.scale == 1 ? "F" : "C", cmd.precision)
+		map.value = getTempInLocalScale(cmd.scaledSensorValue, (cmd.scale == 1 ? "F" : "C"))
 	} else if (cmd.sensorType == 5) {
 		map.name = "humidity"
 		map.unit = "%"
 		map.value = cmd.scaledSensorValue
 	}
-	createEvent(map)
+	sendEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.thermostatoperatingstatev2.ThermostatOperatingStateReport cmd)
-{
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv3.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+		map.name = "temperature"
+		map.unit = getTemperatureScale()
+		map.value = getTempInLocalScale(cmd.scaledSensorValue, (cmd.scale == 1 ? "F" : "C"))
+	} else if (cmd.sensorType == 5) {
+		map.value = cmd.scaledSensorValue
+		map.unit = "%"
+		map.name = "humidity"
+	}
+	sendEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatoperatingstatev2.ThermostatOperatingStateReport cmd) {
 	def map = [name: "thermostatOperatingState" ]
 	switch (cmd.operatingState) {
 		case physicalgraph.zwave.commands.thermostatoperatingstatev2.ThermostatOperatingStateReport.OPERATING_STATE_IDLE:
@@ -231,12 +264,7 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatoperatingstatev2.Thermosta
 			map.value = "vent economizer"
 			break
 	}
-	def result = createEvent(map)
-	if (result.isStateChange && device.latestValue("thermostatMode") == "auto" && (result.value == "heating" || result.value == "cooling")) {
-		def thermostatSetpoint = device.latestValue("${result.value}Setpoint")
-		result = [result, createEvent(name: "thermostatSetpoint", value: thermostatSetpoint, unit: getTemperatureScale())]
-	}
-	result
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanstatev1.ThermostatFanStateReport cmd) {
@@ -252,203 +280,256 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanstatev1.ThermostatFanSt
 			map.value = "running high"
 			break
 	}
-	createEvent(map)
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd) {
-	def map = [name: "thermostatMode"]
-	def thermostatSetpoint = null
+	def map = [name: "thermostatMode", data:[supportedThermostatModes: state.supportedModes]]
 	switch (cmd.mode) {
 		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
 			map.value = "off"
 			break
 		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
 			map.value = "heat"
-			thermostatSetpoint = device.latestValue("heatingSetpoint")
 			break
 		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_AUXILIARY_HEAT:
 			map.value = "emergency heat"
-			thermostatSetpoint = device.latestValue("heatingSetpoint")
 			break
 		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_COOL:
 			map.value = "cool"
-			thermostatSetpoint = device.latestValue("coolingSetpoint")
 			break
 		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_AUTO:
 			map.value = "auto"
-			def temp = device.latestValue("temperature")
-			def heatingSetpoint = device.latestValue("heatingSetpoint")
-			def coolingSetpoint = device.latestValue("coolingSetpoint")
-			if (temp && heatingSetpoint && coolingSetpoint) {
-				if (temp < (heatingSetpoint + coolingSetpoint) / 2.0) {
-					thermostatSetpoint = heatingSetpoint
-				} else {
-					thermostatSetpoint = coolingSetpoint
-				}
-			}
 			break
 	}
 	state.lastTriedMode = map.value
-	if (thermostatSetpoint) {
-		[ createEvent(map), createEvent(name: "thermostatSetpoint", value: thermostatSetpoint, unit: getTemperatureScale()) ]
-	} else {
-		createEvent(map)
-	}
+	sendEvent(map)
+	updateThermostatSetpoint(null, null)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport cmd) {
-	def map = [name: "thermostatFanMode", displayed: false]
+	def map = [name: "thermostatFanMode", data:[supportedThermostatFanModes: state.supportedFanModes]]
 	switch (cmd.fanMode) {
-		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
-			map.value = "fanAuto"
+	case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
+			map.value = "auto"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_LOW:
-			map.value = "fanOn"
+			map.value = "on"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_CIRCULATION:
-			map.value = "fanCirculate"
+			map.value = "circulate"
 			break
 	}
 	state.lastTriedFanMode = map.value
-	createEvent(map)
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = ""
-	if(cmd.off) { supportedModes += "off " }
-	if(cmd.heat) { supportedModes += "heat " }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
-	if(cmd.cool) { supportedModes += "cool " }
-	if(cmd.auto) { supportedModes += "auto " }
+	def supportedModes = []
+	if(cmd.heat) { supportedModes << "heat" }
+	if(cmd.cool) { supportedModes << "cool" }
+	// Make sure off is before auto, this ensures the right setpoint is used based on current temperature when auto is set
+	if(cmd.off) { supportedModes << "off" }
+	if(cmd.auto) { supportedModes << "auto" }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
 
 	state.supportedModes = supportedModes
-	[ createEvent(name:"supportedModes", value: supportedModes, displayed: false),
-	  response(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet()) ]
+	sendEvent(name: "supportedThermostatModes", value: supportedModes, isStateChange: true, displayed: false)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "fanAuto " }
-	if(cmd.low) { supportedFanModes += "fanOn " }
-	if(cmd.circulation) { supportedFanModes += "fanCirculate " }
+	def supportedFanModes = []
+	if(cmd.auto) { supportedFanModes << "auto" }
+	if(cmd.low) { supportedFanModes << "on" }
+	if(cmd.circulation) { supportedFanModes << "circulate" }
 
 	state.supportedFanModes = supportedFanModes
-	[ createEvent(name:"supportedFanModes", value: supportedModes, displayed: false),
-	  response(refresh()) ]
+	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, isStateChange: true, displayed: false)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	log.debug "Zwave event received: $cmd"
+	log.debug "Zwave BasicReport: $cmd"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
+	def batteryState = cmd.batteryLevel
+	def map = [name: "battery", unit: "%", value: cmd.batteryLevel]
+	if ((cmd.batteryLevel == 0xFF) || (cmd.batteryLevel == 0x00)) {  // Special value for low battery alert
 		map.value = 1
 		map.descriptionText = "${device.displayName} battery is low"
 		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
+		batteryState = "low_battery"
 	}
 	state.lastbatt = now()
-	createEvent(map)
+	sendEvent(name: "batteryIcon", value: batteryState, displayed: false)
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.warn "Unexpected zwave command $cmd"
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+log.debug "ManufacturerSpecificReport ${cmd}: value:${cmd}"
+	if (cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
+	if (cmd.productTypeId) {
+		updateDataValue("productTypeId", cmd.productTypeId.toString())
+	}
+	if (cmd.productId) {
+		updateDataValue("productId", cmd.productId.toString())
+	}
+}
+
 def refresh() {
-	// Use encapsulation to differentiate refresh cmds from what the thermostat sends proactively on change
-	def cmd = zwave.sensorMultilevelV2.sensorMultilevelGet()
-	zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:1).encapsulate(cmd).format()
-}
-
-def nextRefreshQuery(name) {
-	def cmd = null
-	switch (name) {
-		case "temperature":
-			cmd = zwave.thermostatModeV2.thermostatModeGet()
-			break
-		case "thermostatMode":
-			cmd = zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1)
-			break
-		case "heatingSetpoint":
-			cmd = zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2)
-			break
-		case "coolingSetpoint":
-			cmd = zwave.thermostatFanModeV3.thermostatFanModeGet()
-			break
-		case "thermostatFanMode":
-			cmd = zwave.thermostatOperatingStateV2.thermostatOperatingStateGet()
-			break
-		case "thermostatOperatingState":
-			// get humidity, multilevel sensor get to endpoint 2
-			cmd = zwave.sensorMultilevelV2.sensorMultilevelGet()
-			return zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:2).encapsulate(cmd).format()
-		default: return null
+	// Only allow refresh every 2 minutes to prevent flooding the Zwave network
+	def timeNow = now()
+	if (!state.refreshTriggeredAt || (2 * 60 * 1000 < (timeNow - state.refreshTriggeredAt))) {
+		state.refreshTriggeredAt = timeNow
+		// refresh will request battery, prevent multiple request by setting lastbatt now
+		state.lastbatt = timeNow
+		// use runIn with overwrite to prevent multiple DTH instances run before state.refreshTriggeredAt has been saved
+		runIn(2, "poll", [overwrite: true])
 	}
-	zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:1).encapsulate(cmd).format()
 }
 
-def quickSetHeat(degrees) {
-	setHeatingSetpoint(degrees, 1000)
+def poll() {
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.multiChannelV3.multiInstanceCmdEncap(instance: 1).encapsulate(zwave.sensorMultilevelV3.sensorMultilevelGet()).format()) // temperature
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format()) // HeatingSetpoint
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format()) // CoolingSetpoint
+	cmds << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.multiChannelV3.multiInstanceCmdEncap(instance: 2).encapsulate(zwave.sensorMultilevelV3.sensorMultilevelGet()).format()) // humidity
+	def time = getTimeAndDay()
+log.debug "time: $time"
+	if (time) {
+		cmds << new physicalgraph.device.HubAction(zwave.clockV1.clockSet(time).format())
+	}
+	// Add 3 seconds delay between each command to avoid flooding the Z-Wave network choking the hub 
+	sendHubCommand(cmds, 3000)
 }
 
-def setHeatingSetpoint(degrees, delay = 30000) {
-	setHeatingSetpoint(degrees.toDouble(), delay)
+def raiseHeatingSetpoint() {
+	alterSetpoint(null, true, "heatingSetpoint")
 }
 
-def setHeatingSetpoint(Double degrees, Integer delay = 30000) {
-	log.trace "setHeatingSetpoint($degrees, $delay)"
-	def deviceScale = state.scale ?: 1
-	def deviceScaleString = deviceScale == 2 ? "C" : "F"
+def lowerHeatingSetpoint() {
+	alterSetpoint(null, false, "heatingSetpoint")
+}
+
+def raiseCoolSetpoint() {
+	alterSetpoint(null, true, "coolingSetpoint")
+}
+
+def lowerCoolSetpoint() {
+	alterSetpoint(null, false, "coolingSetpoint")
+}
+
+// Adjusts nextHeatingSetpoint either .5° C/1° F) if raise true/false
+def alterSetpoint(degrees, raise, setpoint) {
 	def locationScale = getTemperatureScale()
-	def p = (state.precision == null) ? 1 : state.precision
-
-	def convertedDegrees
-	if (locationScale == "C" && deviceScaleString == "F") {
-		convertedDegrees = celsiusToFahrenheit(degrees)
-	} else if (locationScale == "F" && deviceScaleString == "C") {
-		convertedDegrees = fahrenheitToCelsius(degrees)
+	def heatingSetpoint = getTempInLocalScale("heatingSetpoint")
+	def coolingSetpoint = getTempInLocalScale("coolingSetpoint")
+	def targetvalue = (setpoint == "heatingSetpoint") ? heatingSetpoint : coolingSetpoint
+	def delta = (locationScale == "F") ? 1 : 0.5
+	if (raise != null) {
+		targetvalue += raise ? delta : - delta
+	} else if (degrees) {
+		targetvalue = degrees
 	} else {
-		convertedDegrees = degrees
+		log.warn "alterSetpoint called with neither up/down/degree information"
+		return
+	}
+	def data = enforceSetpointLimits(setpoint, [targetvalue: targetvalue, heatingSetpoint: heatingSetpoint, coolingSetpoint: coolingSetpoint])
+	// update UI without waiting for the device to respond, this to give user a smoother UI experience
+	// also, as runIn's have to overwrite and user can change heating/cooling setpoint separately separate runIn's have to be used
+	if (data.targetHeatingSetpoint) {
+		sendEvent("name": "heatingSetpoint", "value": data.targetHeatingSetpoint, unit: locationScale, eventType: "ENTITY_UPDATE")//, displayed: false)
+		runIn(4, "updateHeatingSetpoint", [data: data, overwrite: true])
+	}
+	if (data.targetCoolingSetpoint) {
+		sendEvent("name": "coolingSetpoint", "value": data.targetCoolingSetpoint, unit: locationScale, eventType: "ENTITY_UPDATE")//, displayed: false)
+		runIn(4, "updateCoolingSetpoint", [data: data, overwrite: true])
+	}
+}
+
+def updateHeatingSetpoint(data) {
+	updateSetpoints(data)
+}
+
+def updateCoolingSetpoint(data) {
+	updateSetpoints(data)
+}
+
+def enforceSetpointLimits(setpoint, data) {
+	// Enforce max/min for setpoints
+	def maxSetpoint = getTempInLocalScale(95, "F")
+	def minSetpoint = getTempInLocalScale(35, "F")
+	def targetvalue = data.targetvalue
+	def heatingSetpoint = null
+	def coolingSetpoint = null
+
+	if (targetvalue > maxSetpoint) {
+		targetvalue = maxSetpoint
+	} else if (targetvalue < minSetpoint) {
+		targetvalue = minSetpoint
+	}
+	// Enforce limits, for now make sure heating <= cooling, and cooling >= heating
+	if (setpoint == "heatingSetpoint") {
+		heatingSetpoint = targetvalue
+		coolingSetpoint = (heatingSetpoint > data.coolingSetpoint) ? heatingSetpoint : null
+	}
+	if (setpoint == "coolingSetpoint") {
+		coolingSetpoint = targetvalue
+		heatingSetpoint = (coolingSetpoint < data.heatingSetpoint) ? coolingSetpoint : null
+	}
+	return [targetHeatingSetpoint: heatingSetpoint, targetCoolingSetpoint: coolingSetpoint]
+}
+
+def setHeatingSetpoint(degrees) {
+	if (degrees) {
+		def data = enforceSetpointLimits("heatingSetpoint",
+				[targetvalue: degrees.toDouble(), heatingSetpoint: getTempInLocalScale("heatingSetpoint"), coolingSetpoint: getTempInLocalScale("coolingSetpoint")])
+		updateSetpoints(data)
+	}
+}
+
+def setCoolingSetpoint(degrees) {
+	if (degrees) {
+		def data = enforceSetpointLimits("coolingSetpoint",
+				[targetvalue: degrees.toDouble(), heatingSetpoint: getTempInLocalScale("heatingSetpoint"), coolingSetpoint: getTempInLocalScale("coolingSetpoint")])
+		updateSetpoints(data)
+	}
+}
+
+def updateSetpoints(data) {
+	def cmds = []
+	if (data.targetHeatingSetpoint) {
+		cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointSet(
+					setpointType: 1, scale: state.scale, precision: state.precision, scaledValue: convertToDeviceScale(data.targetHeatingSetpoint)).format())
+	}
+	if (data.targetCoolingSetpoint) {
+		cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointSet(
+					setpointType: 2, scale: state.scale, precision: state.precision, scaledValue: convertToDeviceScale(data.targetCoolingSetpoint)).format())
 	}
 
-	delayBetween([
-		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 1, scale: deviceScale, precision: p, scaledValue: convertedDegrees).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format()
-	], delay)
+	// Always request both setpoints in case thermostat changed both
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
+	sendHubCommand(cmds)
 }
 
-def quickSetCool(degrees) {
-	setCoolingSetpoint(degrees, 1000)
-}
-
-def setCoolingSetpoint(degrees, delay = 30000) {
-	setCoolingSetpoint(degrees.toDouble(), delay)
-}
-
-def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
-	log.trace "setCoolingSetpoint($degrees, $delay)"
-	def deviceScale = state.scale ?: 1
-	def deviceScaleString = deviceScale == 2 ? "C" : "F"
+def convertToDeviceScale(setpoint) {
 	def locationScale = getTemperatureScale()
-	def p = (state.precision == null) ? 1 : state.precision
-
-	def convertedDegrees
-	if (locationScale == "C" && deviceScaleString == "F") {
-		convertedDegrees = celsiusToFahrenheit(degrees)
-	} else if (locationScale == "F" && deviceScaleString == "C") {
-		convertedDegrees = fahrenheitToCelsius(degrees)
-	} else {
-		convertedDegrees = degrees
-	}
-
-	delayBetween([
-		zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 2, scale: deviceScale, precision: p,	 scaledValue: convertedDegrees).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format()
-	], delay)
+	def deviceScale = (state.scale == 1) ? "F" : "C"
+	return (deviceScale == locationScale) ? setpoint :
+		(deviceScale == "F" ? celsiusToFahrenheit(setpoint.toBigDecimal()) : roundC(fahrenheitToCelsius(setpoint.toBigDecimal())))
 }
 
 /**
@@ -456,78 +537,56 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
  * */
 def ping() {
 	log.debug "ping() called"
-	refresh()
-}
-
-def configure() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
-	], 2300)
-}
-
-def modes() {
-	["off", "heat", "cool", "auto", "emergency heat"]
+	// Just get Operating State as it is not reported when it chnages and there's no need to flood more commands
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()))
 }
 
 def switchMode() {
-	def currentMode = device.currentState("thermostatMode")?.value
+	def currentMode = device.currentValue("thermostatMode")
 	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedModes")
-	def modeOrder = modes()
-	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
-	def nextMode = next(lastTriedMode)
-	if (supportedModes?.contains(currentMode)) {
-		while (!supportedModes.contains(nextMode) && nextMode != "off") {
-			nextMode = next(nextMode)
-		}
+	def supportedModes = state.supportedModes
+	if (supportedModes) {
+		def next = { supportedModes[supportedModes.indexOf(it) + 1] ?: supportedModes[0] }
+		def nextMode = next(lastTriedMode)
+		setThermostatMode(nextMode)
+		state.lastTriedMode = nextMode
+	} else {
+		log.warn "supportedModes not defined"
 	}
-	state.lastTriedMode = nextMode
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[nextMode]).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], 1000)
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedModes")
-	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
-	if (nextMode in modes()) {
+	def supportedModes = state.supportedModes
+	if (supportedModes && supportedModes.contains(nextMode)) {
+		setThermostatMode(nextMode)
 		state.lastTriedMode = nextMode
-		"$nextMode"()
 	} else {
-		log.debug("no mode method '$nextMode'")
+		log.debug("ThermostatMode $nextMode is not supported by ${device.displayName}")
 	}
 }
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
 	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "fanAuto fanOn"
-	def modeOrder = ["fanAuto", "fanCirculate", "fanOn"]
-	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
-	def nextMode = next(lastTriedMode)
-	while (!supportedModes?.contains(nextMode) && nextMode != "fanAuto") {
-		nextMode = next(nextMode)
+	def supportedFanModes = state.supportedFanModes
+	if (supportedFanModes) {
+		def next = { supportedFanModes[supportedFanModes.indexOf(it) + 1] ?: supportedFanModes[0] }
+		def nextMode = next(lastTriedMode)
+		setThermostatFanMode(nextMode)
+		state.lastTriedFanMode = nextMode
+	} else {
+		log.warn "supportedFanModes not defined"
 	}
-	switchToFanMode(nextMode)
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedFanModes")
-	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
-
-	def returnCommand
-	if (nextMode == "fanAuto") {
-		returnCommand = fanAuto()
-	} else if (nextMode == "fanOn") {
-		returnCommand = fanOn()
-	} else if (nextMode == "fanCirculate") {
-		returnCommand = fanCirculate()
+	def supportedFanModes = state.supportedFanModes
+	if (supportedFanModes && supportedFanModes.contains(nextMode)) {
+		setThermostatFanMode(nextMode)
+		state.lastTriedFanMode = nextMode
 	} else {
-		log.debug("no fan mode '$nextMode'")
+		log.debug("FanMode $nextMode is not supported by ${device.displayName}")
 	}
-	if(returnCommand) state.lastTriedFanMode = nextMode
-	returnCommand
 }
 
 def getDataByName(String name) {
@@ -543,10 +602,10 @@ def getModeMap() { [
 ]}
 
 def setThermostatMode(String value) {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[value]).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[value]).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+	sendHubCommand(cmds)
 }
 
 def getFanModeMap() { [
@@ -556,69 +615,70 @@ def getFanModeMap() { [
 ]}
 
 def setThermostatFanMode(String value) {
-	delayBetween([
-		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: fanModeMap[value]).format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
-	], standardDelay)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: fanModeMap[value]).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+	sendHubCommand(cmds)
 }
 
 def off() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: 0).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	switchToMode("off")
 }
 
 def heat() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: 1).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	switchToMode("heat")
 }
 
 def emergencyHeat() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: 4).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	switchToMode("emergency heat")
 }
 
 def cool() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	switchToMode("cool")
 }
 
 def auto() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSet(mode: 3).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format()
-	], standardDelay)
+	switchToMode("auto")
 }
 
 def fanOn() {
-	delayBetween([
-		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 1).format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
-	], standardDelay)
+	switchToFanMode("on")
 }
 
 def fanAuto() {
-	delayBetween([
-		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 0).format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
-	], standardDelay)
+	switchToFanMode("auto")
 }
 
 def fanCirculate() {
-	delayBetween([
-		zwave.thermostatFanModeV3.thermostatFanModeSet(fanMode: 6).format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format()
-	], standardDelay)
+	switchToFanMode("circulate")
 }
 
-private getStandardDelay() {
-	1000
+private getTimeAndDay() {
+	def timeNow = now()
+	// Need to check that location have timeZone as SC may have created the location without setting it
+	// Don't update clock more than once a day
+	if (location.timeZone && (!state.timeClockSet || (24 * 60 * 60 * 1000 < (timeNow - state.timeClockSet)))) {
+		def currentDate = Calendar.getInstance(location.timeZone)
+		state.timeClockSet = timeNow
+		return [hour: currentDate.get(Calendar.HOUR_OF_DAY), minute: currentDate.get(Calendar.MINUTE), weekday: currentDate.get(Calendar.DAY_OF_WEEK)]
+	}
 }
 
+// Get stored temperature from currentState in current local scale
+def getTempInLocalScale(state) {
+	def temp = device.currentState(state)
+	if (temp && temp.value && temp.unit) {
+		return getTempInLocalScale(temp.value.toBigDecimal(), temp.unit)
+	}
+	return 0
+}
+
+// get/convert temperature to current local scale
+def getTempInLocalScale(temp, scale) {
+	def scaledTemp = convertTemperatureIfNeeded(temp.toBigDecimal(), scale).toDouble()
+	return (getTemperatureScale() == "F" ? scaledTemp.round(0).toInteger() : roundC(scaledTemp))
+}
+
+def roundC (tempC) {
+	return (Math.round(tempC.toDouble() * 2))/2
+}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -171,8 +171,8 @@ private Map getBatteryResult(rawValue) {
 			def pct = batteryMap[volts]
 			result.value = pct
 		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
+			def minVolts = 2.4
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -274,7 +274,7 @@ private Map getBatteryResult(rawValue) {
 			result.value = pct
 		} else {
 			def minVolts = 2.1
-			def maxVolts = 3.0
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/zwave-basic-smoke-alarm.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-basic-smoke-alarm.src/README.md

@@ -0,0 +1,39 @@
+# Z-wave Basic Smoke Alarm
+
+Cloud Execution
+
+Works with: 
+
+* [First Alert Smoke Detector (ZSMOKE)](https://www.smartthings.com/products/first-alert-smoke-detector)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Smoke Detector** - measure smoke and optionally carbon monoxide levels
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+First Alert Smoke Detector (ZSMOKE) is a Z-wave sleepy device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+* __122min__ checkInterval
+
+## Battery Specification
+
+Two AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [First Alert Smoke Detector (ZSMOKE) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207150556-First-Alert-Smoke-Detector-ZSMOKE-)

devicetypes/smartthings/zwave-basic-smoke-alarm.src/zwave-basic-smoke-alarm.groovy

@@ -0,0 +1,181 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Basic Smoke Alarm", namespace: "smartthings", author: "SmartThings") {
+		capability "Smoke Detector"
+		capability "Sensor"
+		capability "Battery"
+		capability "Health Check"
+
+		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
+	}
+
+	simulator {
+		status "smoke": "command: 7105, payload: 01 FF"
+		status "clear": "command: 7105, payload: 01 00"
+		status "test": "command: 7105, payload: 0C FF"
+		status "battery 100%": "command: 8003, payload: 64"
+		status "battery 5%": "command: 8003, payload: 05"
+	}
+
+	tiles (scale: 2){
+		multiAttributeTile(name:"smoke", type: "lighting", width: 6, height: 4){
+			tileAttribute ("device.smoke", key: "PRIMARY_CONTROL") {
+				attributeState("clear", label:"clear", icon:"st.alarm.smoke.clear", backgroundColor:"#ffffff")
+				attributeState("detected", label:"SMOKE", icon:"st.alarm.smoke.smoke", backgroundColor:"#e86d13")
+				attributeState("tested", label:"TEST", icon:"st.alarm.smoke.test", backgroundColor:"#e86d13")
+			}
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main "smoke"
+		details(["smoke", "battery"])
+	}
+}
+
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	def cmds = []
+	createSmokeEvents("smokeClear", cmds)
+	cmds.each { cmd -> sendEvent(cmd) }
+}
+
+def updated() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def parse(String description) {
+	def results = []
+	if (description.startsWith("Err")) {
+	    results << createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [ 0x80: 1, 0x84: 1, 0x71: 2, 0x72: 1 ])
+		if (cmd) {
+			zwaveEvent(cmd, results)
+		}
+	}
+	log.debug "'$description' parsed to ${results.inspect()}"
+	return results
+}
+
+def createSmokeEvents(name, results) {
+	def text = null
+	switch (name) {
+		case "smoke":
+			text = "$device.displayName smoke was detected!"
+			// these are displayed:false because the composite event is the one we want to see in the app
+			results << createEvent(name: "smoke",          value: "detected", descriptionText: text)
+			break
+		case "tested":
+			text = "$device.displayName was tested"
+			results << createEvent(name: "smoke",          value: "tested", descriptionText: text)
+			break
+		case "smokeClear":
+			text = "$device.displayName smoke is clear"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text)
+			name = "clear"
+			break
+		case "testClear":
+			text = "$device.displayName test cleared"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text)
+			name = "clear"
+			break
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
+	if (cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_SMOKE) {
+		if (cmd.zwaveAlarmEvent == 3) {
+			createSmokeEvents("tested", results)
+		} else {
+			createSmokeEvents((cmd.zwaveAlarmEvent == 1 || cmd.zwaveAlarmEvent == 2) ? "smoke" : "smokeClear", results)
+		}
+	} else switch(cmd.alarmType) {
+		case 1:
+			createSmokeEvents(cmd.alarmLevel ? "smoke" : "smokeClear", results)
+			break
+		case 12:  // test button pressed
+			createSmokeEvents(cmd.alarmLevel ? "tested" : "testClear", results)
+			break
+		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
+			if (cmd.alarmLevel == 255) {
+				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
+			} else {
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
+			}
+			
+			// Clear smoke in case they pulled batteries and we missed the clear msg
+			if(device.currentValue("smoke") != "clear") {
+				createSmokeEvents("smokeClear", results)
+			}
+			
+			// Check battery if we don't have a recent battery event
+			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
+				results << response(zwave.batteryV1.batteryGet())
+			}
+			break
+		default:
+			results << createEvent(displayed: true, descriptionText: "Alarm $cmd.alarmType ${cmd.alarmLevel == 255 ? 'activated' : cmd.alarmLevel ?: 'deactivated'}".toString())
+			break
+	}
+}
+
+// SensorBinary and SensorAlarm aren't tested, but included to preemptively support future smoke alarms
+//
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd, results) {
+	if (cmd.sensorType == physicalgraph.zwave.commandclasses.SensorBinaryV2.SENSOR_TYPE_SMOKE) {
+		createSmokeEvents(cmd.sensorValue ? "smoke" : "smokeClear", results)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd, results) {
+	if (cmd.sensorType == 1) {
+		createSmokeEvents(cmd.sensorState ? "smoke" : "smokeClear", results)
+	}
+	
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
+	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
+	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
+		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
+	} else {
+		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
+	def map = [ name: "battery", unit: "%", isStateChange: true ]
+	state.lastbatt = now()
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "$device.displayName battery is low!"
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	results << createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd, results) {
+	def event = [ displayed: false ]
+	event.linkText = device.label ?: device.name
+	event.descriptionText = "$event.linkText: $cmd"
+	results << createEvent(event)
+}

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -72,7 +72,7 @@ def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 
 def poll() {
 	if (secondsPast(state.lastbatt, 36*60*60)) {
-		return zwave.batteryV1.batteryGet().format
+		return zwave.batteryV1.batteryGet().format()
 	} else {
 		return null
 	}

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -21,8 +21,6 @@ metadata {
 
 		attribute "alarmState", "string"
 
-		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
-		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 
@@ -57,6 +55,10 @@ metadata {
 def installed() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	def cmds = []
+	createSmokeOrCOEvents("allClear", cmds) // allClear to set inital states for smoke and CO
+	cmds.each { cmd -> sendEvent(cmd) }
 }
 
 def updated() {
@@ -105,6 +107,12 @@ def createSmokeOrCOEvents(name, results) {
 			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
 			name = "clear"
 			break
+		case "allClear":
+			text = "$device.displayName all clear"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
+			name = "clear"
+			break
 		case "testClear":
 			text = "$device.displayName test cleared"
 			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -15,10 +15,9 @@ metadata {
 	definition (name: "Z-Wave Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Configuration"
-		capability "Polling"
+		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
 		
@@ -117,7 +116,7 @@ metadata {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"polling.poll", icon:"st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		main "temperature"
 		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
@@ -125,13 +124,20 @@ metadata {
 }
 
 def installed(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format()))
+	initialize()
 }
 
 def updated(){
+	initialize()
+}
+
+def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	unschedule()
+	runEvery5Minutes("refresh")
+	refresh()
 }
 
 def parse(String description)
@@ -149,6 +155,7 @@ def parse(String description)
 		]
 		if (map.name == "thermostatMode") {
 			state.lastTriedMode = map.value
+			map.data = [supportedThermostatModes:state.supportedThermostatModes]
 			if (map.value == "cool") {
 				map2.value = device.latestValue("coolingSetpoint")
 				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
@@ -172,6 +179,7 @@ def parse(String description)
 		}
 	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
 		state.lastTriedFanMode = map.value
+		map.data = [supportedThermostatFanModes: state.supportedThermostatFanModes]
 	}
 	log.debug "Parse returned $result"
 	result
@@ -305,26 +313,26 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = ""
-	if(cmd.off) { supportedModes += "off " }
-	if(cmd.heat) { supportedModes += "heat " }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
-	if(cmd.cool) { supportedModes += "cool " }
-	if(cmd.auto) { supportedModes += "auto " }
+	def supportedModes = []
+	if(cmd.off) { supportedModes << "off" }
+	if(cmd.heat) { supportedModes << "heat" }
+	if(cmd.cool) { supportedModes << "cool" }
+	if(cmd.auto) { supportedModes << "auto" }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
 
-	state.supportedModes = supportedModes
-	// No events to be generated, return empty map
+	state.supportedThermostatModes = supportedModes
+	sendEvent(name: "supportedThermostatModes", value: supportedModes, displayed: false)
 	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
-	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
-	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
+	def supportedFanModes = []
+	if(cmd.auto) { supportedFanModes << "auto" } // "fanAuto "
+	if(cmd.circulation) { supportedFanModes << "circulate" } // "fanCirculate"
+	if(cmd.low) { supportedFanModes << "on" } // "fanOn"
 
-	state.supportedFanModes = supportedFanModes
-	// No events to be generated, return empty map
+	state.supportedThermostatFanModes = supportedFanModes
+	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, displayed: false)
 	return [:]
 }
 
@@ -337,15 +345,17 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 // Command Implementations
-def poll() {
-	delayBetween([
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
+def refresh() {
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.sensorMultilevelV2.sensorMultilevelGet().format()) // current temperature
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
+	sendHubCommand(cmds)
 }
 
 def quickSetHeat(degrees) {
@@ -416,28 +426,14 @@ def ping() {
 	poll()
 }
 
-def configure() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
-}
-
 def modes() {
-	["off", "heat", "cool", "auto", "emergency heat"]
+	return state.supportedThermostatModes
 }
 
 def switchMode() {
 	def currentMode = device.currentState("thermostatMode")?.value
-	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedModes")
+	def lastTriedMode = state.lastTriedMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatModes")
 	def modeOrder = modes()
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
@@ -454,7 +450,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedModes")
+	def supportedModes = getDataByName("supportedThermostatModes")
 	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
@@ -466,9 +462,9 @@ def switchToMode(nextMode) {
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
-	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
-	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
+	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatFanModes") ?: ["auto", "on"]
+	def modeOrder = state.supportedThermostatFanModes
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
 	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
@@ -478,7 +474,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedFanModes")
+	def supportedFanModes = getDataByName("supportedThermostatFanModes")
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand

devicetypes/stj/mqtt-bridge.src/mqtt-bridge.groovy

@@ -0,0 +1,108 @@
+/**
+ *  MQTT Bridge
+ *
+ * 	Authors
+ *   - st.john.johnson@gmail.com
+ *   - jeremiah.wuenschel@gmail.com
+ *
+ *  Copyright 2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ */
+
+import groovy.json.JsonSlurper
+import groovy.json.JsonOutput
+
+metadata {
+    definition (name: "MQTT Bridge", namespace: "stj", author: "St. John Johnson and Jeremiah Wuenschel") {
+        capability "Notification"
+    }
+
+    preferences {
+        input("ip", "string",
+            title: "MQTT Bridge IP Address",
+            description: "MQTT Bridge IP Address",
+            required: true,
+            displayDuringSetup: true
+        )
+        input("port", "string",
+            title: "MQTT Bridge Port",
+            description: "MQTT Bridge Port",
+            required: true,
+            displayDuringSetup: true
+        )
+        input("mac", "string",
+            title: "MQTT Bridge MAC Address",
+            description: "MQTT Bridge MAC Address",
+            required: true,
+            displayDuringSetup: true
+        )
+    }
+
+    simulator {}
+
+    tiles {
+        valueTile("basic", "device.ip", width: 3, height: 2) {
+            state("basic", label:'OK')
+        }
+        main "basic"
+    }
+}
+
+// Store the MAC address as the device ID so that it can talk to SmartThings
+def setNetworkAddress() {
+    // Setting Network Device Id
+    def hex = "$settings.mac".toUpperCase().replaceAll(':', '')
+    if (device.deviceNetworkId != "$hex") {
+        device.deviceNetworkId = "$hex"
+        log.debug "Device Network Id set to ${device.deviceNetworkId}"
+    }
+}
+
+// Parse events from the Bridge
+def parse(String description) {
+    setNetworkAddress()
+
+    log.debug "Parsing '${description}'"
+    def msg = parseLanMessage(description)
+
+    return createEvent(name: "message", value: new JsonOutput().toJson(msg.data))
+}
+
+// Send message to the Bridge
+def deviceNotification(message) {
+    if (device.hub == null)
+    {
+        log.error "Hub is null, must set the hub in the device settings so we can get local hub IP and port"
+        return
+    }
+    
+    log.debug "Sending '${message}' to device"
+    setNetworkAddress()
+
+    def slurper = new JsonSlurper()
+    def parsed = slurper.parseText(message)
+    
+    if (parsed.path == '/subscribe') {
+        parsed.body.callback = device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
+    }
+
+    def headers = [:]
+    headers.put("HOST", "$ip:$port")
+    headers.put("Content-Type", "application/json")
+
+    def hubAction = new physicalgraph.device.HubAction(
+        method: "POST",
+        path: parsed.path,
+        headers: headers,
+        body: parsed.body
+    )
+    hubAction
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -2,26 +2,11 @@ import javax.crypto.Mac;
 import javax.crypto.spec.SecretKeySpec;
 import java.security.InvalidKeyException;
 
-/**
- *  OpenT2T SmartApp Test
- *
- *  Copyright 2016 OpenT2T
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
 definition(
 		name: "OpenT2T SmartApp Test",
 		namespace: "opent2t",
-		author: "OpenT2T",
-		description: "Test app to test end to end SmartThings scenarios via OpenT2T",
+		author: "Microsoft",
+		description: "SmartApp for end to end SmartThings scenarios via OpenT2T",
 		category: "SmartThings Labs",
 		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
 		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -55,16 +40,16 @@ definition(
 
 //Device Inputs
 preferences {
-	section("Allow OpenT2T to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false, hideWhenEmpty: true
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+	section("Allow Microsoft to control these things...") {
+//		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+//		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+//		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+//		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+//		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+//		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
 		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
+//		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
@@ -82,36 +67,32 @@ def getInputs() {
 	return inputList
 }
 
+
 //API external Endpoints
 mappings {
 	path("/devices") {
-		action:
-		[
+		action: [
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
-		[
+		action: [
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
-		[
+		action: [
 				PUT: "updateDevice"
 		]
 	}
 	path("/deviceSubscription") {
-		action:
-		[
+		action: [
 				POST  : "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
 	path("/locationSubscription") {
-		action:
-		[
+		action: [
 				POST  : "registerDeviceGraph",
 				DELETE: "unregisterDeviceGraph"
 		]
@@ -196,7 +177,7 @@ def registerDeviceChange() {
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
 				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
-				// For now, we will only have one subscription endpoint per device
+                // For now, we will only have one subscription endpoint per device
 				state.deviceSubscriptionMap.remove(deviceId)
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
@@ -311,16 +292,16 @@ def deviceEventHandler(evt) {
 	def evtDeviceType = getDeviceType(evtDevice)
 	def deviceData = [];
 
-	if (evt.data != null) {
-		def evtData = parseJson(evt.data)
-		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
-	}
-
 	if (evtDeviceType == "thermostat") {
 		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id]
 	} else {
 		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id]
 	}
+    
+    if(evt.data != null){
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+	}
 
 	def params = [body: deviceData]
 
@@ -330,10 +311,10 @@ def deviceEventHandler(evt) {
 		params.uri = "${it}"
 		if (state.verificationKeyMap[it] != null) {
 			def key = state.verificationKeyMap[it]
-			params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+            params.headers = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
 		}
 		log.trace "POST URI: ${params.uri}"
-		log.trace "Header: ${params.header}"
+        log.trace "Headers: ${params.headers}"
 		log.trace "Payload: ${params.body}"
 		try {
 			httpPostJson(params) { resp ->
@@ -363,10 +344,10 @@ def locationEventHandler(evt) {
 				params.uri = "${it}"
 				if (state.verificationKeyMap[it] != null) {
 					def key = state.verificationKeyMap[it]
-					params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+                    params.headers = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
 				}
 				log.trace "POST URI: ${params.uri}"
-				log.trace "Header: ${params.header}"
+				log.trace "Headers: ${params.headers}"
 				log.trace "Payload: ${params.body}"
 				try {
 					httpPostJson(params) { resp ->
@@ -385,6 +366,7 @@ def locationEventHandler(evt) {
 
 private ComputHMACValue(key, data) {
 	try {
+    	log.debug "data hased: ${data}"
 		SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
 		Mac mac = Mac.getInstance("HmacSHA1")
 		mac.init(secretKeySpec)
@@ -507,7 +489,8 @@ private getDeviceType(device) {
 
 	//Loop through the device capability list to determine the device type.
 	capabilities.each { capability ->
-		switch (capability.name.toLowerCase()) {
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
 
@@ -652,7 +635,8 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -202,7 +202,8 @@ def inputSelectionPage() {
 
         section("options variations") {
             paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", options: ["Thing 1", "Thing 2", "(Complicated) Thing 3"])
+            input(type: "enum", name: "selectionSimpleGrouped", title: "Simple (Grouped) options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
             input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
         }
 
@@ -214,15 +215,15 @@ def inputSelectionPage() {
 
         section("segmented") {
             paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", options: ["One"])
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", options: ["One", "Two", "Three", "Four"])
 
             paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
             input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
             input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
 
             paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
+            input(type: "enum", name: "selectionSegmentedWithDefault", style: "segmented", title: "defaulted to 'two'", options: ["One", "Two", "Three"], defaultValue: "Two")
         }
 
         section("required: true") {
@@ -231,6 +232,8 @@ def inputSelectionPage() {
 
         section("multiple: true") {
             input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
+            input(type: "enum", name: "selectionMultipleDefault1", title: "This allows multiple selections with a single default", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: "an option")
+            input(type: "enum", name: "selectionMultipleDefault2", title: "This allows multiple selections with multiple defaults", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: ["an option", "another option"])
         }
 
         section("with image") {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -72,7 +72,7 @@ def authPage() {
 		log.debug "have LIFX access token"
 
 		def options = locationOptions() ?: []
-		def count = options.size()
+		def count = options.size().toString()
 
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {