Modifying 'Reminders using notifications and light'

Additionally, the Temp-Motion app sends an in-app notification if the temperature of the container exceeds a particular threshold.

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -18,6 +18,7 @@ metadata {
 	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Sensor"
 		capability "Temperature Measurement"
+		capability "Motion Sensor"
 		capability "Refresh"
 	}
 

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,39 +403,21 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
@@ -443,38 +425,15 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig() +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -45,28 +45,17 @@ metadata {
 	}
 
 	preferences {
-		section {
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
-		}
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
-				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-		}
 
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
@@ -89,8 +78,8 @@ metadata {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
-		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery"])
+		main(["contact", "acceleration", "temperature"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 
@@ -98,9 +87,7 @@ def parse(String description) {
 	def results
 
 	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
-		if (garageSensor != "Yes") {
-			results = parseSingleMessage(description)
-		}
+		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
 		//TODO is there a better way to handle this like the other device types?
@@ -216,9 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			if (garageSensor != "Yes") {
-				results.addAll(getContactResult(part, description))
-			}
+			results.addAll(getContactResult(part, description))
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -240,29 +225,6 @@ private List parseContactMessage(String description) {
 	results
 }
 
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
-		}
-		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
-		}
-	}
-	else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
-		}
-		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
-		}
-	}
-}
-
 private List parseOrientationMessage(String description) {
 	def results = []
 	def xyzResults = [x: 0, y: 0, z: 0]
@@ -292,34 +254,7 @@ private List parseOrientationMessage(String description) {
 		}
 	}
 
-	def xyz = getXyzResult(xyzResults, description)
-	results << xyz
-
-	if (garageSensor == "Yes") {
-		// Looks for Z-axis orientation as virtual contact state
-		def a = xyz.value.split(',').collect{it.toInteger()}
-		def absValueXY = Math.max(Math.abs(a[0]), Math.abs(a[1]))
-		def absValueZ = Math.abs(a[2])
-		log.debug "absValueXY: $absValueXY, absValueZ: $absValueZ"
-
-		def contactValue = null
-		def garageValue = null
-
-		if (absValueZ > 825 && absValueXY < 175) {
-			contactValue = 'open'
-			garageValue = 'garage-open'
-			log.debug "STATUS: open"
-		}
-		else if (absValueZ < 75 && absValueXY > 825) {
-			contactValue = 'closed'
-			garageValue = 'garage-closed'
-			log.debug "STATUS: closed"
-		}
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
-		results << createEvent(name: "contact", value: contactValue, descriptionText: descriptionText, unit: "", displayed: false)
-		results << createEvent(name: "status", value: garageValue, descriptionText: descriptionText, unit: "")
-	}
+	results << getXyzResult(xyzResults, description)
 
 	results
 }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
 	}
 
 	// simulator metadata
@@ -263,5 +264,9 @@ def retypeBasedOnMSR() {
 			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
 			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
+			setDeviceType("Vision Motion Sensor Plus (SG)")
+			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def detail = state?.deviceDetail[deviceId]
+		def data = state?.deviceState[deviceId]
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Medicine Management - Contact Sensor
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
+ * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
+ * --- ----- Once draw IS open, LED will return back to it's original color
+ *
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Contact Sensor",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+
+	section("My Medicine Draw/Cabinet"){
+		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
+	} 
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceContactSensor, "contact", contactHandler)
+
+    // how many minutes to look in the past from the reminder time, for an open draw
+    state.minutesToCheckOpenDraw = 60
+    
+    // is true when LED notification is set after exceeding 10 minutes past reminder time
+    state.ledNotificationTriggered = false
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkOpenDrawInPast)
+   
+}
+
+// Should turn off any LED notification on OPEN state
+def contactHandler(evt){
+	if (evt.value == "open") {
+        // if LED notification triggered, reset it.
+        log.debug "Cabinet opened"
+        if (state.ledNotificationTriggered) {
+            resetLEDNotification()
+        }
+	}
+}
+
+// If the draw was NOT opened within 60 minutes of the timer send notification out.
+def checkOpenDrawInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
+	log.debug "Cabinet found opened: $cabinetOpened"
+    
+    // if it's opened, then do nothing and assume they took their meds
+    if (!cabinetOpened) {    
+    	sendNotification("Hi, please remember to take your meds in the cabinet")
+       
+       // if no open activity, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
+    }
+}
+
+// If the draw was NOT opened after 10 minutes past reminder, use LED notification
+def checkOpenDrawAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def cabinetOpened = isOpened(10)    
+    
+   	log.debug "Cabinet found opened: $cabinetOpened"
+        
+    // if no open activity, blink lights
+    if (!cabinetOpened) {
+    	log.debug "Set LED to Notification color"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the sensor has been opened since the minutes entered
+// Return true if opened found, else false.
+def isOpened(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceContactSensor.eventsSince(previousDateTime)   
+    def cabinetOpened = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "open") {
+                cabinetOpened = true 
+            }
+        }
+	}
+    
+    return cabinetOpened
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	state.ledNotificationTriggered = true
+    
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+	state.ledNotificationTriggered = false
+    
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    if (state.origColor != null) {
+    	deviceLight.setHue(state.origColor)
+    }
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+
+}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Medicine Management - Temp-Motion
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- If temp > threshold set, send notification
+ * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
+ * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
+ * --- ----- Once motion is detected, LED will turn back to it's original color
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Temp-Motion",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+ 
+     section("My Medicine in the Refrigerator"){
+		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
+        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
+	} 
+
+	section("Temperature Threshold"){
+    	input "tempThreshold", "number", title: "Temperature Threshold"
+    }
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }    
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+	// will notify when temp exceeds max
+    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
+    
+    // how many minutes to look in the past from the reminder time
+    state.minutesToCheckPriorToReminder = 60
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkMotionInPast)
+}
+
+
+// If temp > 39 then send an app notification out.
+def tempHandler(evt){
+	if (evt.doubleValue > tempThreshold) {
+    	log.debug "Fridge temp of $evt.value exceeded threshold"
+   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
+	}
+}
+
+// Should turn off any LED notification once motion detected
+def motionHandler(evt){
+    // always call out to stop any possible LED notification
+	log.debug "Medication moved. Send stop LED notification"
+    resetLEDNotification()
+}
+
+// If no motion detected within 60 minutes of the timer send notification out.
+def checkMotionInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def movement = isMoved(state.minutesToCheckPriorToReminder)
+	log.debug "Motion found: $movement"
+    
+    // if there was movement, then do nothing and assume they took their meds
+    if (!movement) {    
+    	sendNotification("Hi, please remember to take your meds in the fridge")
+    
+        // if no movement, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkMotionAfterReminder)
+    }
+}
+
+// If still no movement after 10 minutes past reminder, use LED notification
+def checkMotionAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def movement = isMoved(10)    
+    
+   	log.debug "Motion found: $movement"
+        
+    // if no open activity, blink lights
+    if (!movement) {
+    	log.debug "Notify LED API"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the accelerometer has been activated since the minutes entered
+// Return true if active, else false.
+def isMoved(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
+    def motion = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "active") {
+                motion = true 
+            }
+        }
+	}
+    
+    return motion
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    deviceLight.setHue(state.origColor)
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+}

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -1,345 +0,0 @@
-/**
- *  SmartThings service for Prempoint
- *
- *  Author: Prempoint Inc. (c) 2016
- *   
- */
-definition(
-    name: "Prempoint",
-    namespace: "prempoint.com",
-    author: "Prempoint Inc.",
-    description: "SmartThings service for Prempoint",
-    category: "Connections",
-    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
-    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
-    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
-    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
-
-preferences {
-	section("Allow Prempoint to Control & Access These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
-        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/list") {
-		action: [
-			GET: "listDevices"
-		]
-	}
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-    path("/switches/:id/:command") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/switches/:id/:command/:level") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/locks") {
-		action: [
-			GET: "listLocks"
-		]
-	}
-	path("/locks/:id") {
-		action: [
-			GET: "showLock"
-		]
-	}
-	path("/locks/:id/:command") {
-		action: [
-			GET: "updateLock"
-		]
-	}
-    path("/doors/:id") {
-		action: [
-			GET: "showDoor"
-		]
-	}
-   	path("/doors/:id/:command") {
-		action: [
-			GET: "updateDoor"
-		]
-	}
-	path("/garagedoors/:id") {
-		action: [
-			GET: "showGarageDoor"
-		]
-	}
-   	path("/garagedoors/:id/:command") {
-		action: [
-			GET: "updateGarageDoor"
-		]
-	}
-    path("/cameras/:id") {
-		action: [
-			GET: "showCamera"
-		]
-	}  
-    path("/cameras/:id/:command") {
-		action: [
-			GET: "updateCamera"
-		]
-	}  
-}
-
-def installed() {}
-
-def updated() {}
-
-def listDevices() {
-	log.debug "entering listDevices"
-    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
-    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
-}
-
-//switches
-def listSwitches() {
-    log.debug "entering listSwitches"
-	switches.collect{showDevice(it,"switch")}
-}
-
-def showSwitch() {
-	log.debug "entering showSwitches"
-	show(switches, "switch")
-}
-
-def updateSwitch() {
-	log.debug "entering updateSwitches"
-	update(switches, "switch")
-}
-
-//locks
-def listLocks() {
-	log.debug "entering listLocks"
-	locks.collect{showDevice(it,"lock")}
-}
-
-def showLock() {
-	log.debug "entering showLock"
-	show(locks, "lock")
-}
-
-def updateLock() {
-	log.debug "entering updateLock"
-	update(locks, "lock")
-}
-
-//doors
-def listDoors() {
-	log.debug "entering listDoors"
-	locks.collect{showDevice(it,"door")}
-}
-
-def showDoor() {
-	log.debug "entering showDoors"
-	show(doors, "door")
-}
-
-def updateDoor() {
-	log.debug "entering updateDoor"
-	update(doors, "door")
-}
-
-//garagedoors
-def listGarageDoors() {
-	log.debug "entering listGarageDoors"
-	locks.collect{showDevice(it,"garagedoor")}
-}
-
-def showGarageDoor() {
-	log.debug "entering showGarageDoors"
-	show(garagedoors, "garagedoor")
-}
-
-def updateGarageDoor() {
-	log.debug "entering updateGarageDoor"
-	update(gargedoors, "garagedoor")
-}
-
-//cameras
-def listCameras() {
-	log.debug "entering listCameras"
-	cameras.collect{showDevice(it,"image")}
-}
-
-def showCamera() {
-	log.debug "entering showCameras"
-	show(cameras, "camera")
-}
-
-def updateCamera() {
-	log.debug "entering updateCamera"
-	update(cameras, "camera")
-}
-
-def deviceHandler(evt) {}
-
-private update(devices, type) {
-	def rc = null
-
-	//def command = request.JSON?.command
-    def command = params.command
-    
-    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
-    
-    // Process the command.
-	if (command) 
-    {
-		def dev = devices.find { it.id == params.id }
-		if (!dev) {
-			httpError(404, "Device not found: $params.id")
-		} else if (type == "switch") {
-			switch(command) {
-			    case "on":
-			    	rc = dev.on()
-			    	break
-			    case "off":
-			    	rc = dev.off()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "lock") {
-			switch(command) {
-			    case "lock":
-			    	rc = dev.lock()
-			    	break
-			    case "unlock":
-			    	rc = dev.unlock()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
-			}
-		} else if (type == "door") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "garagedoor") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "camera") {
-			switch(command) {
-			    case "take":
-			    	rc = dev.take()
-			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		}
-
-		log.debug "executed device=$it.id $dev command=$command rc=$rc"
-        
-        // Check that the device is a switch that is currently on, supports 'setLevel"
-        // and that a level was specified.
-        int level = params.level ? params.level as int : -1;
-        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
-            log.debug "device about to setLevel=$level"
-            dev.setLevel(level);
-        }
-        
-        // Show the device info if necessary.
-        if (rc == null) {
-        	rc = showDevice(dev, type)
-        }
-	}
-    
-    return rc
-}
-
-private show(devices, type) {
-	def dev = devices.find { it.id == params.id }
-	if (!dev) {
-		httpError(404, "Device not found")
-	} else { 
-        // Show the device info.
-        showDevice(dev, type)
-	}
-}
-
-private showDevice(it, type) {
-	def props = null
-
-	// Get the current state for the device type.
-	def state = [it.currentState(type)]
-    
-	// Check that whether the a switch device with level support is located and update the returned device type.
-    def devType =  type
-    
-    if (type == "switch" && hasLevel(it)) {
-    	// Assign "switchWithLevel" to device type.
-    	devType = "switchWithLevel"
-        // Add the level state.
-        def levelState = it.currentState("level")
-        if (levelState) {
-        	state.add(levelState)
-        }
-    }
-    
-    log.debug "device label=$it.label type=$devType"
-    
-    // Assign the device item properties if appropriate.
-    if (it) {
-    	props = [id: it.id, label: it.label, type: devType, state: state]
-        // Add the hub information to the device properties
-        // if appropriate.
-        if (it.hub) {
-        	props.put("location", it.hub.hub.location)
-        }
-        if (it.currentImage) {
-        	props.put("currentImage", it.currentImage)
-        }
-    }
-    
-    return props
-}
-
-private hasLevel(device) {
-    // Default return value.
-    def rc = false;
-
-	// Get the device supported commands.
-    def supportedCommands = device.supportedCommands
-    
-    // Check to see if the "setLevel" was found and assign
-    // the appropriate return value.
-    if (supportedCommands) {
-        // Find the "setLevel" command. 
-        rc = supportedCommands.toString().indexOf("setLevel") != -1
-    }
-    
-    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
-            
-    return rc
-}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-
-			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else {
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+				def hue = getHue(dimmer, nextLevel)
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
+	return hasCommand(device, "setLevel")
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
-	device.supportedCommands.each {
-		if (it.name.contains("setColor")) {
-			hasColor = true
-		}
-	}
-	return hasColor
+	return hasCommand(device, "setColor")
+}
+
+private hasCommand(device, String command) {
+	return (device.supportedCommands.find { it.name == command } != null)
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -348,26 +360,29 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
+						d.completedSetup = true
 						d.refresh()
 					}
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
+				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -399,6 +414,7 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
+				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -486,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,29 +658,73 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-			}
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
+    if (device) {
+        if (validateCommand(device, command)) {
+            if (arguments) {
+                device."$command"(*arguments)
+            } else {
+                device."$command"()
+            }
+            render status: 204, data: "{}"
+        } else {
+          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+        }
+    } else {
+      render status: 404, data: '{"msg": "Device not found"}'
+    }
+  }
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(device)
+	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
 	}
 }
 
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(device) {
+    def capName = ""
+    if (switches.find{it.id == device.id})
+			capName = "Switch"
+		else if (alarms.find{it.id == device.id})
+			capName = "Alarm"
+		else if (locks.find{it.id == device.id})
+			capName = "Lock"
+    log.trace "Device: $device - Capability Name: $capName"
+		return capName
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -780,17 +824,51 @@ def deviceHandler(evt) {
 
 def sendToHarmony(evt, String callbackUrl) {
 	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
+  if(isIP(callback.host)){
+  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+  	sendHubCommand(new physicalgraph.device.HubAction(
+  		method: "POST",
+  		path: path,
+  		headers: [
+  			"Host": host,
+  			"Content-Type": "application/json"
+  		],
+  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+  	))
+  } else {
+    def params = [
+      uri: callbackUrl,
+      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+    ]
+    try {
+        log.debug "Sending data to Harmony Cloud: $params"
+        httpPostJson(params) { resp ->
+            log.debug "Harmony Cloud - Response: ${resp.status}"
+        }
+    } catch (e) {
+        log.error "Harmony Cloud - Something went wrong: $e"
+    }
+  }
+}
+
+public static boolean isIP(String str) {
+    try {
+         String[] parts = str.split("\\.");
+         if (parts.length != 4) return false;
+         for (int i = 0; i < 4; ++i) {
+             int p
+             try {
+               p = Integer.parseInt(parts[i]);
+             } catch (Exception e) {
+               return false;
+             }
+             if (p > 255 || p < 0) return false;
+         }
+         return true;
+    } catch (Exception e) {
+        return false;
+    }
 }
 
 def listHubs() {

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,22 +92,87 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	if (command) {
-		devices."$command"()
+	def type = params.param1
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	if (command) {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	def type = params.param1
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
+		httpError(404, "Device not found")
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, name) {