MSA-1914: nest protect

Rolling down staging to master

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -0,0 +1,426 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+//
+// 2017-04-10 - DrZwave (with help from Don Kirker) - changed fingerprint to the new format, lowered the OnTime 
+//              and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+// 2016-10-06 - erocm1231 - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being
+//              reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+// 2016-01-28 - erocm1231 - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers.
+//              Also, added configurationGet and a configurationReport method so that config values can be verified.
+// 2015-12-04 - erocm1231 - added range value to preferences as suggested by @Dela-Rick.
+// 2015-11-26 - erocm1231 - Fixed null condition error when adding as a new device. 
+// 2015-11-24 - erocm1231 - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed 
+//              the device not having its on/off status updated when colors are changed.
+// 2015-11-23 - erocm1231 - Changed the look to match SmartThings v2 devices. 
+// 2015-11-21 - erocm1231 - Made code much more efficient. Also made it compatible when setColor is passed a hex value.
+//              Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, 
+//              Daylight - Energize - Teal, Warm White - Relax - Yellow
+// 2015-11-19 - erocm1231 - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+// 2015-11-18 - erocm1231 - Added to setColor for compatibility with Smart Lighting
+// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
+// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
+// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Actuator"
+	capability "Sensor"
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    capability "Refresh"
+
+	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+	} //end simulator
+
+    
+    tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+				attributeState "statusText", label:'${currentValue}'
+			}
+        }
+
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 65, color: "#a0a0f0"],
+				[value: 70, color: "#e0e050"],
+				[value: 75, color: "#f0d030"], // yellow
+				[value: 80, color: "#fbf020"],
+				[value: 85, color: "#fbdc01"],
+				[value: 90, color: "#fb3a01"],
+				[value: 95, color: "#fb0801"]  // red=hot
+			]
+		}
+
+        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+			//state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"],
+                //lux measurement values
+                [value: 150, color: "#404040"],
+				[value: 300, color: "#808080"],
+				[value: 600, color: "#a0a0a0"],
+				[value: 900, color: "#e0e0e0"]
+			]
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}    
+		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["temperature","motion", "switch"])
+		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
+	}  // end tiles
+    
+	preferences {
+       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
+       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
+       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
+       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
+          [1:"Percent",
+           2:"Lux"])
+  }
+
+} // end metadata
+
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	//log.debug "==> New Zwave Event: ${description}"
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		def cmdData = zwaveEvent(cmd)
+		if (cmdData != [:])
+			result << createEvent(cmdData)
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == "" || lum == null || lum == 1) ? "%" : "LUX"}"
+    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
+	}
+    if (result != [null] && result != []) log.debug "Parse returned ${result}"
+    
+    
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+            if(lum == "" || lum == null || lum == 1) map.unit = "%"
+            else map.unit = "lux"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    if (cmd.value == 0 && device.latestState("color").value != "#ffffff") {
+        sendEvent(name: "color", value: "#ffffff", displayed: true)
+    }
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def updated()
+{
+    log.debug "updated() is being called"
+    
+    def cmds = configure()
+    
+    if (cmds != []) response(cmds)
+}
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value}"
+    def myred
+    def mygreen
+    def myblue
+    def hexValue
+    def cmds = []
+
+    if ( value.level == 1 && value.saturation > 20) {
+		def rgb = huesatToRGB(value.hue as Integer, 100)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if ( value.level > 1 ) {
+		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if (value.hex) {
+		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    }
+    else {
+        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+        mygreen=value.green >=128 ? 255 : 0
+        myblue=value.blue>=128 ? 255 : 0
+    }
+    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
+  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+    // So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    cmds << zwave.basicV1.basicGet().format()
+    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
+    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=60
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 60			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=10
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 10			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+def refresh() {
+	def cmd = []
+    cmd << zwave.switchColorV3.switchColorGet().format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
+    cmd << zwave.basicV1.basicGet().format()
+    delayBetween(cmd, 1000)
+}
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
+	], 100)
+	//log.debug cmd
+	cmd + refresh()
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}
+def rgbToHex(rgb) {
+    def r = hex(rgb.r)
+    def g = hex(rgb.g)
+    def b = hex(rgb.b)
+    def hexColor = "#${r}${g}${b}"
+    
+    hexColor
+}
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,13 +14,13 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
-        
+
         capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
@@ -28,26 +28,26 @@ metadata {
 	}
 
 	simulator {
-		
+
 	}
-    
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
             	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
                 attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
+			}
         }
-                
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -60,7 +60,7 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        
+
         main "FGK"
         details(["FGK","battery", "temperature"])
     }
@@ -68,9 +68,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"   
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -87,7 +87,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -125,13 +125,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
+    	switch (cmd.event) {
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-                
+
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -145,7 +145,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -153,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -166,7 +166,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -177,32 +177,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -221,7 +221,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
         map.name = "temperature"
         map.displayed = true
 	}
-	
+
     createEvent(map)
 }
 
@@ -231,9 +231,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+
     def cmds = []
-        
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -242,7 +242,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 
@@ -261,7 +261,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
+
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -269,4 +269,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
@@ -26,26 +26,26 @@ metadata {
 	}
 
 	simulator {
-		
+
 	}
-        
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
             	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
                 attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
+			}
         }
-                
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         main "FGK"
         details(["FGK","battery"])
     }
@@ -53,9 +53,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"   
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -72,7 +72,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -110,13 +110,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
+    	switch (cmd.event) {
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-                
+
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -130,7 +130,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -138,7 +138,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -151,7 +151,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -160,32 +160,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -204,7 +204,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
     def cmds = []
-    
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -212,7 +212,7 @@ def configure() {
     cmds += zwave.batteryV1.batteryGet()
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 
@@ -231,7 +231,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
+
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -239,4 +239,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
@@ -37,13 +37,13 @@ metadata {
 				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
 				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
 			}
-			
+
 			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
 			}
 		}
-		
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -130,14 +130,14 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 	[event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
 	log.debug "manufacturerName: ${cmd.manufacturerName}"
 	log.debug "productId:        ${cmd.productId}"
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
 	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
 	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"
@@ -23,27 +23,27 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Health Check"
-        
+
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
-    
+
 	simulator {
-		
+
     }
-    
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
             	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}  
+			}
         }
-        
+
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -56,15 +56,15 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        
+
         valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
 			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
-        
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         main "FGMS"
         details(["FGMS","battery","temperature","illuminance"])
     }
@@ -72,9 +72,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"        
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -91,7 +91,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -159,13 +159,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                     map.descriptionText = "${device.displayName}: motion has stopped"
                 }
         		break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
                 map.descriptionText = "${device.displayName}: tamper alarm activated"
             	break
-                
+
             case 8:
                 map.name = "motion"
                 map.value = "active"
@@ -173,7 +173,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -194,39 +194,39 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
     cmds << "delay 500"
     cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
     cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))
     cmds << "delay 1200"
     cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
     [event, response(cmds)]
-    
+
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -245,7 +245,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
     def cmds = []
-    
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -255,7 +255,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 

devicetypes/jaffala/nest-protect.src/nest-protect.groovy

@@ -0,0 +1,48 @@
+/**
+ *  Nest Protect
+ *
+ *  Copyright 2017 nick@nickhbailey.com
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Nest Protect", namespace: "jaffala", author: "nick@nickhbailey.com") {
+		capability "Battery"
+		capability "Carbon Monoxide Detector"
+		capability "Polling"
+		capability "Smoke Detector"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'battery' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'smoke' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+
+}
+
+// handle commands
+def poll() {
+	log.debug "Executing 'poll'"
+	// TODO: handle 'poll' command
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,6 +100,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,6 +58,11 @@ metadata {
  }
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -59,7 +59,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }
@@ -166,4 +166,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -23,9 +23,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer"
 		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 
@@ -84,6 +84,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -85,6 +85,11 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"
@@ -29,7 +29,7 @@ metadata {
 			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage()
 		}
 	}
-	
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -29,7 +29,7 @@
  * 2.	20150125	Todd Wackford
  *		Leaned out parse and moved most device info getting into configuration method.
  */
- 
+
  /**
  * Sets up metadata, simulator info and tile definition.
  *
@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -47,7 +47,7 @@
 		capability 	"Sensor"
 		capability 	"Battery"
 		capability  "Health Check"
-        
+
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
         command		"updateZwaveParam"
@@ -110,7 +110,7 @@
 			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
-        
+
 
 		main(["motion", "temperature", "acceleration", "illuminance"])
 		details(["motion", "temperature", "acceleration", "battery", "illuminance", "configure"])
@@ -130,18 +130,18 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
     def cmds = []
-    
+
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// turn on tamper sensor with active/inactive reports (use it as an acceleration sensor) default is 0, or off
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [4], parameterNumber: 24, size: 1).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 24).format()
-        
+
     // temperature change report threshold (0-255 = 0.1 to 25.5C) default is 1.0 Celcius, setting to .5 Celcius
     cmds << zwave.configurationV1.configurationSet(configurationValue: [5], parameterNumber: 60, size: 1).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format() 
-    
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format()
+
     cmds << response(zwave.batteryV1.batteryGet())
     cmds << response(zwave.versionV1.versionGet().format())
     cmds << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -155,20 +155,20 @@ def parse(String description)
 {
 	def result = []
 	def cmd = zwave.parse(description, [0x72: 2, 0x31: 2, 0x30: 1, 0x84: 1, 0x9C: 1, 0x70: 2, 0x80: 1, 0x86: 1, 0x7A: 1, 0x56: 1])
-    
+
     if (description == "updated") {
         result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 7200, nodeid:zwaveHubNodeId))
-		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())            
+		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 	}
-    
+
 	if (cmd) {
-		if( cmd.CMD == "8407" ) { 
+		if( cmd.CMD == "8407" ) {
             result << response(zwave.batteryV1.batteryGet().format())
-        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format()) 
+        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
         }
 		result << createEvent(zwaveEvent(cmd))
 	}
-    
+
     if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
@@ -189,14 +189,14 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 	}
 }
 
-def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -205,7 +205,7 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
@@ -304,7 +304,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
     updateDataValue("MSR", msr)
-    
+
     if ( msr == "010F-0800-2001" ) { //this is the msr and device type for the fibaro motion sensor
     	configure()
     }
@@ -334,7 +334,7 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {   
+	if ( params ) {
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -344,7 +344,7 @@ def updateZwaveParam(params) {
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)        
+        delayBetween(cmds, 1000)
     }
 }
 
@@ -388,13 +388,13 @@ def resetParams2StDefaults() {
     cmds << zwave.configurationV1.configurationSet(configurationValue: [18], parameterNumber: 86, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [28], parameterNumber: 87, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 89, size: 1).format()
-    
+
     delayBetween(cmds, 500)
 }
 
  /**
- * Lists all of available Fibaro parameters and thier current settings out to the 
- * logging window in the IDE This will be called from the "Fibaro Tweaker" or 
+ * Lists all of available Fibaro parameters and thier current settings out to the
+ * logging window in the IDE This will be called from the "Fibaro Tweaker" or
  * user's own app.
  *
  * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
@@ -433,7 +433,6 @@ def listCurrentParams() {
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 86).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 87).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 89).format()
-    
+
 	delayBetween(cmds, 500)
 }
-

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,6 +50,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,10 +57,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,10 +45,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,10 +66,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,10 +50,19 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,10 +55,20 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -190,7 +200,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -119,7 +129,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -39,14 +40,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
 def installed() {
 	log.debug "installed()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+	initialize()
 }
 
 def updated() {
 	log.debug "updated()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+	initialize()
 }
 
 def startActivity(String activityId) {

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 
@@ -44,7 +44,7 @@ def parse(String description) {
 	if (description.startsWith("zone")) {
 		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
 	}
-	
+
 	log.debug "Parse returned $resMap"
 	return resMap
 }

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -91,6 +91,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -18,8 +18,8 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
-	
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+
     	capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -57,7 +57,7 @@ metadata {
 		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
 			state "level", label: 'Level ${currentValue}%'
 		}
-		
+
 
 		main(["switch"])
 		details(["switch", "level", "levelSliderControl", "refresh"])
@@ -87,11 +87,11 @@ def parse(String description) {
     if (description?.startsWith("read attr")) {
     	log.debug description[-2..-1]
         def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-        
+
 		sendEvent( name: "level", value: i )
     }
-    
-	
+
+
 }
 
 def on() {
@@ -136,16 +136,16 @@ def setLevel(value) {
 def configure() {
 
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [	
-  
+	def configCmds = [
+
         //Switch Reporting
         "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-        
+
         //Level Control Reporting
         "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 500",
 	]

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -114,9 +114,17 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
+    def cmds = []
+    if (device.getDataValue("manufacturer") == "sengled") {
+        def startLevel = 0xFE
+        if ((device.currentState("level")?.value != null)) {
+            startLevel = Math.round(Integer.parseInt(device.currentState("level").value) * 0xFE / 100)
+        }
+        // Level Control Cluster, command Move to Level, level start level, transition time 0
+        cmds << zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, sprintf("%02X0000", startLevel))
+    }
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    cmds + refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
 		capability "Actuator"
 		capability "Color Control"

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -101,7 +101,7 @@ def refresh() {
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
         cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
     }
-    
+
 	cmds
 }
 

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,6 +78,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -30,6 +30,9 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
 	}
 
 	// simulator metadata
@@ -79,6 +82,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,6 +68,11 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -100,6 +100,11 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -74,6 +74,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -36,7 +36,7 @@ metadata {
 		status "inactive": "command: 3003, payload: 00"
 		status "active": "command: 3003, payload: FF"
 	}
-	
+
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
@@ -51,7 +51,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
@@ -197,4 +202,4 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
-}
+}

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 */
 
 metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,7 +53,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -61,6 +61,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -22,9 +22,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "GE Plug-In Switch"
 		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
@@ -65,6 +65,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -124,6 +124,11 @@ metadata {
 	}
 }
 
+def installed(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-virtual-momentary-contact-switch.src/zwave-virtual-momentary-contact-switch.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-07
  */
 metadata {
-	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Refresh"

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -29,7 +29,7 @@ metadata {
 		status "dry": "command: 3003, payload: 00"
 		status "wet": "command: 3003, payload: FF"
 	}
-	
+
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -52,15 +52,15 @@ definition(
 //Device Inputs
 preferences {
 	section("Allow OpenT2T to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
@@ -80,16 +80,6 @@ def getInputs() {
 
 //API external Endpoints
 mappings {
-	path("/subscriptionURL/:url") {
-		action: [
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action: [
-				PUT: "updateConnectionId"
-		]
-	}
 	path("/devices") {
 		action: [
 				GET: "getDevices"
@@ -105,33 +95,52 @@ mappings {
 				PUT: "updateDevice"
 		]
 	}
-	path("/subscription/:id") {
+	path("/deviceSubscription") {
 		action: [
 				POST: "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
+	path("/locationSubscription") {
+		action: [
+				POST: "registerDeviceGraph",
+				DELETE: "unregisterDeviceGraph"
+		]
+	}
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+	log.debug "Installing with settings: ${settings}"
 	initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+	log.debug "Updating with settings: ${settings}"
+	if(state.deviceSubscriptionMap == null){
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+	if( state.locationSubscriptionMap == null){
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
 	unsubscribe()
-	registerSubscriptions()
+	registerAllDeviceSubscriptions()
 }
 
 def initialize() {
-	state.connectionId = ""
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
-	registerSubscriptions()
+	log.debug "Initializing with settings: ${settings}"
+	state.deviceSubscriptionMap = [:]
+	log.debug "deviceSubscriptionMap created."
+	registerAllDeviceSubscriptions()
+	state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
 }
 
+/*** Subscription Functions  ***/
+
 //Subscribe events for all devices
-def registerSubscriptions() {
+def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
@@ -140,101 +149,195 @@ def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
 		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+			subscribe(myDevice, att.name, deviceEventHandler)
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
 	}
 }
 
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	def theAtts = myDevice.supportedAttributes
 	try {
 		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+			subscribe(myDevice, att.name, deviceEventHandler)
+		}
+		log.info "Subscribing for ${myDevice.displayName}"
+
+		if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
 		}
-		return ["succeed"]
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	return ["succeed"]
 }
 
 //Endpoints function: Unsubscribe to events from a specific device
 def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	try {
-		unsubscribe(myDevice)
-		log.info "Unregistering ${myDevice.displayName}"
-		return ["succeed"]
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+		} else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+		if(state.locationSubscriptionMap[location.id] == null){
+			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+			state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		}
+		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+		return ["succeed"]
+	} else {
+		httpError(400, "missing input parameter: subscriptionURL")
+	}
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+		}else{
+			httpError(400, "missing input parameter: subscriptionURL")
+		}
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
-	def evt_device_id = evt.deviceId
-	def evt_device_value = evt.value
-	def evt_name = evt.name
+def deviceEventHandler(evt) {
 	def evt_device = evt.device
-	def evt_deviceType = getDeviceType(evt_device);
+	def evt_deviceType = getDeviceType(evt_device)
 	def deviceInfo
 
-	if(evt_deviceType == "thermostat")
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
+	def params = [ body: [deviceName: evt_device.displayName, deviceId: evt_device.id,  locationId: location.id] ]
+
+	if(evt.data != null){
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evt_device.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
-	def params = [
-			uri: "${state.endpointURL}/${state.connectionId}",
-			body: [ deviceInfo ]
-	]
-	try {
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evt_device.displayName} is ${state.deviceSubscriptionMap[evt_device.id]}"
+	state.deviceSubscriptionMap[evt_device.id].each {
+		params.uri = "${it}"
 		log.trace "POST URI: ${params.uri}"
 		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
-			resp.headers.each {
-				log.debug "${it.name} : ${it.value}"
+		try{
+			httpPostJson(params) { resp ->
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
 			}
-			log.trace "response status code: ${resp.status}"
-			log.trace "response data: ${resp.data}"
+		} catch (e) {
+			log.error "something went wrong: $e"
 		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
 	}
 }
 
-//Endpoints function: update subcription endpoint url [state.endpoint]
-void updateEndpointURL() {
-	state.endpointURL = params.url
-	log.info "Updated EndpointURL to ${state.endpointURL}"
+def locationEventHandler(evt) {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
+	switch(evt.name){
+		case "DeviceCreated":
+		case "DeviceDeleted":
+			def evt_device = evt.device
+			def evt_deviceType = getDeviceType(evt_device)
+			log.info "DeviceName: ${evt_device.displayName}, DeviceID: ${evt_device.id}, deviceType: ${evt_deviceType}"
+
+			def params = [ body: [ eventType:evt.name, deviceId: evt_device.id, locationId: location.id ] ]
+
+			state.locationSubscriptionMap[location.id].each {
+				params.uri = "${it}"
+				log.trace "POST URI: ${params.uri}"
+				log.trace "Payload: ${params.body}"
+				try{
+					httpPostJson(params) { resp ->
+						log.trace "response status code: ${resp.status}"
+						log.trace "response data: ${resp.data}"
+					}
+				} catch (e) {
+					log.error "something went wrong: $e"
+				}
+			}
+		case "DeviceUpdated":
+		default:
+			break
+	}
 }
 
-//Endpoints function: update global variable [state.connectionId]
-void updateConnectionId() {
-	def connId = params.connId
-	state.connectionId = connId
-	log.info "Updated ConnectionID to ${state.connectionId}"
-}
+
+/*** Device Query/Update Functions  ***/
 
 //Endpoints function: return all device data in json format
 def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat")
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		}
-		else
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -247,14 +350,12 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat")
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
+
 	log.debug "getDevice, return: ${device}"
 	return device
 }
@@ -350,9 +451,6 @@ private getDeviceType(device) {
 					}
 				}
 				break
-			case "contact sensor":
-				deviceType = "contactSensor"
-				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
 				return deviceType
@@ -362,17 +460,15 @@ private getDeviceType(device) {
 			case "video camera":
 				deviceType = "camera"
 				return deviceType
-			case "motion sensor":
-				deviceType = "motionSensor"
-				return deviceType
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
 				return deviceType
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
 			case "water sensor":
-				deviceType = "waterSensor"
+				deviceType = "genericSensor"
 				return deviceType
 			default:
 				break
@@ -387,14 +483,33 @@ private findDevice(deviceId) {
 }
 
 //Return a list of device attributes
-private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute->
+private deviceAttributeList(device, deviceType) {
+	def attributeList = [:]
+	def allAttributes = device.supportedAttributes
+	allAttributes.each { attribute ->
 		try {
-			[ (attribute.name): device.currentValue(attribute.name) ]
+			def currentState = device.currentState(attribute.name)
+			if(currentState != null ){
+				switch(attribute.name){
+					case 'temperature':
+						attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+						break;
+					default:
+						attributeList.putAll([(attribute.name): currentState.value ])
+						break;
+				}
+				if( deviceType == "genericSensor" ){
+					def key = attribute.name + "_lastUpdated"
+					attributeList.putAll([ (key): currentState.isoDate ])
+				}
+			} else {
+				attributeList.putAll([ (attribute.name): null ]);
+			}
 		} catch(e) {
-			[ (attribute.name): null ]
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
+	return attributeList
 }
 
 //Map device command and value. 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -73,7 +73,7 @@ def bridgeDiscovery(params = [:]) {
 	}
 
 	ssdpSubscribe()
-
+	log.trace "bridgeRefreshCount: $bridgeRefreshCount"
 	//bridge discovery request every 15 //25 seconds
 	if ((bridgeRefreshCount % 5) == 0) {
 		discoverBridges()
@@ -207,6 +207,7 @@ def bulbDiscovery() {
 }
 
 private discoverBridges() {
+	log.trace "Sending Hue Discovery message to the hub"
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -47,6 +47,7 @@ def getCallbackUrl()             { return "${getServerUrl()}/oauth/callback" }
 def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
 def getSecretKey()               { return appSettings.secretKey }
 def getClientId()                { return appSettings.clientId }
+private getVendorName() { "LIFX" }
 
 def authPage() {
 	log.debug "authPage test1"
@@ -76,6 +77,7 @@ def authPage() {
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {
 				input "selectedLocationId", "enum", required:true, title:"Select location ({{count}} found)", messageArgs: [count: count], multiple:false, options:options, submitOnChange: true
+				paragraph "Devices will be added automatically from your ${vendorName} account. To add or delete devices please use the Official ${vendorName} App."
 			}
 		}
 	}