MSA-1391: This app takes the events from a switch and uses them to toggle multiple outlets or other switches. The idea is to be able to leverage a physical switch to control multiple outlets to enable a whole room to turn on at the touch of a switch.

devicetypes/living-room/fan.src/fan.groovy

@@ -1,47 +0,0 @@
-/**
- *  Fan
- *
- *  Copyright 2016 Mike
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fan", namespace: "Living Room", author: "Mike") {
-		capability "Switch"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'switch' attribute
-
-}
-
-// handle commands
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -327,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -82,12 +83,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }

smartapps/mdvickst/use-switch-to-control-outlets.src/use-switch-to-control-outlets.groovy

@@ -1,7 +1,7 @@
 /**
- *  Fan
+ *  Use Switch to Control Outlets
  *
- *  Copyright 2016 Mike
+ *  Copyright 2016 Mark Vickstrom
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,10 +14,10 @@
  *
  */
 definition(
-    name: "Fan",
+    name: "Use Switch to Control Outlets",
-    namespace: "Living Room",
+    namespace: "mdvickst",
-    author: "Mike",
+    author: "Mark Vickstrom",
-    description: "Turn Fan on/off",
+    description: "Use a Switch to control multiple outlets",
     category: "Convenience",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,9 +25,12 @@ definition(
 
 
 preferences {
-	section("Title") {
+	section("Use this Switch") {
-		// TODO: put inputs here
+		input "triggerSwitch", "capability.switch", title: "Which Switch?", required: true
 	}
+    section("To Control these Devices") {
+    	input "switchesToControl", "capability.switch", title: "Which Outlets/Switches?", multiple: true, required: true
+    }
 }
 
 def installed() {
@@ -44,7 +47,15 @@ def updated() {
 }
 
 def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
+	subscribe(triggerSwitch, "switch", triggerSwitchPressed)
 }
 
-// TODO: implement event handlers
+def triggerSwitchPressed(evt){
+    if (evt.value == "on") {
+        log.debug "swtich pressed On"
+        switchesToControl?.on()
+    } else if (evt.value == "off") {
+        log.debug "swtich pressed Off"
+        switchesToControl?.off()
+    }
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+    
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-
+    
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)
+        if (huesettings.saturation != null)   
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-
+    
-    // Default behavior is to turn light on
+    // Default behavior is to turn light on 
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else
+        else 
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")