MSA-1947: .

devicetypes/sensative/sensative-zb-strips.src/sensative-zb-strips.groovy

@@ -1,182 +0,0 @@
-/**
- *  SmartSense Open/Closed Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-metadata {
-	definition(name: "Sensative ZB Strips", namespace: "sensative", author: "SmartThings") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Contact Sensor"
-		capability "Refresh"
-		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Sensative", model: "Strips-001"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Sensative", model: "Strips-001"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Sensativee", model: "Strips-001", deviceJoinName: "Sensative ZB Strips"
-        
-	}
-
-	simulator {
-
-	}
-
-	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
-			}
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°F',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: 'Battery\n${currentValue}%', unit: ""
-		}
-
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
-		}
-
-		main(["contact"])
-		details(["contact", "battery", "temperature", "refresh"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
-	}
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
-}
-
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
-	def linkText = getLinkText(device)
-
-    def result = [:]
-
-	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def minVolts = 2.1
-		def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
-		result.value = Math.min(100, roundedPct)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
-	}
-
-	return result
-}
-
-private Map getContactResult(value) {
-	log.debug 'Contact Status'
-	def linkText = getLinkText(device)
-	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-	return [
-			name           : 'contact',
-			value          : value,
-			descriptionText: descriptionText
-	]
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
-def refresh() {
-	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
-
-	return refreshCmds + zigbee.enrollResponse()
-}
-
-def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
-}