MSA-933: 스마트싱작업 테스트해보는중입니다

[DVCSMP-1442] Cree bulb does not properly reflect dimming value

devicetypes/-/test.src/test.groovy

@@ -0,0 +1,93 @@
+/**
+ *  TEST
+ *
+ *  Copyright 2016 박춘영
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "TEST", namespace: "스마트보안", author: "박춘영") {
+		capability "Button"
+		capability "Samsung TV"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'button' attribute
+	// TODO: handle 'volume' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'pictureMode' attribute
+	// TODO: handle 'soundMode' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'messageButton' attribute
+
+}
+
+// handle commands
+def volumeUp() {
+	log.debug "Executing 'volumeUp'"
+	// TODO: handle 'volumeUp' command
+}
+
+def volumeDown() {
+	log.debug "Executing 'volumeDown'"
+	// TODO: handle 'volumeDown' command
+}
+
+def setVolume() {
+	log.debug "Executing 'setVolume'"
+	// TODO: handle 'setVolume' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setPictureMode() {
+	log.debug "Executing 'setPictureMode'"
+	// TODO: handle 'setPictureMode' command
+}
+
+def setSoundMode() {
+	log.debug "Executing 'setSoundMode'"
+	// TODO: handle 'setSoundMode' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def showMessage() {
+	log.debug "Executing 'showMessage'"
+	// TODO: handle 'showMessage' command
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  Cree Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,29 +15,29 @@
  */
  
 metadata {
-	definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
-		capability "Actuator"
+        capability "Actuator"
         capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
-	}
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
+    // UI tile definitions
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -62,18 +62,12 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getKnownDescription(description)
+    def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
+        sendEvent(resultMap)
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
         log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
@@ -87,7 +81,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -1,7 +1,5 @@
 /**
- *  Ecobee Sensor
- *
- *  Copyright 2015 Juan Risso
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -12,6 +10,9 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
+ *	Ecobee Sensor
+ *
+ *	Author: SmartThings
  */
 metadata {
 	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -26,7 +27,16 @@ metadata {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
 					backgroundColors:[
-							[value: 31, color: "#153591"],
+							// Celsius
+							[value: 0, color: "#153591"],
+							[value: 7, color: "#1e9cbb"],
+							[value: 15, color: "#90d2a7"],
+							[value: 23, color: "#44b621"],
+							[value: 28, color: "#f1d801"],
+							[value: 35, color: "#d04e00"],
+							[value: 37, color: "#bc2323"],
+							// Fahrenheit
+							[value: 40, color: "#153591"],
 							[value: 44, color: "#1e9cbb"],
 							[value: 59, color: "#90d2a7"],
 							[value: 74, color: "#44b621"],
@@ -38,8 +48,8 @@ metadata {
 		}
 
 		standardTile("motion", "device.motion") {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,4 +1,3 @@
-
 /**
  *  Hue Bulb
  *
@@ -11,13 +10,14 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-                command "reset"        
-                command "refresh"
+        command "reset"
+        command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,23 +33,58 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-	}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
+		main(["switch"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
 }
 
 // parse events into attributes
@@ -68,17 +103,17 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
+void on() {
 	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
+void off() {
 	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def nextLevel() {
+void nextLevel() {
 	def level = device.latestValue("level") as Integer ?: 0
 	if (level <= 100) {
 		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
@@ -89,25 +124,25 @@ def nextLevel() {
 	setLevel(level)
 }
 
-def setLevel(percent) {
+void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-def setSaturation(percent) {
+void setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	parent.setSaturation(this, percent)
 	sendEvent(name: "saturation", value: percent)
 }
 
-def setHue(percent) {
+void setHue(percent) {
 	log.debug "Executing 'setHue'"
 	parent.setHue(this, percent)
 	sendEvent(name: "hue", value: percent)
 }
 
-def setColor(value) {
+void setColor(value) {
 	log.debug "setColor: ${value}, $this"
 	parent.setColor(this, value)
 	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
@@ -117,25 +152,33 @@ def setColor(value) {
 	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
 }
 
-def reset() {
+void reset() {
 	log.debug "Executing 'reset'"
     def value = [level:100, hex:"#90C638", saturation:56, hue:23]
     setAdjustedColor(value)
 	parent.poll()
 }
 
-def setAdjustedColor(value) {
+void setAdjustedColor(value) {
 	if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
         adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
-        adjusted.level = null 
+        adjusted.level = null
         setColor(adjusted)
     }
 }
 
-def refresh() {
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+	}
+}
+
+void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -9,17 +9,18 @@ metadata {
 	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-       
-        command "refresh"       
+
+        command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-    
+
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -35,25 +36,32 @@ metadata {
 	            attributeState "level", label: 'Level ${currentValue}%'
 			}
         }
-    
+
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
         }
-        
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
-           
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }        
+        }
 
         main(["switch"])
-        details(["rich-control", "refresh"])
-    }    
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
 }
 
 // parse events into attributes
@@ -74,23 +82,31 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
+void on() {
 	parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
+void off() {
 	parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def setLevel(percent) {
+void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-def refresh() {
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+	}
+}
+
+void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -0,0 +1,31 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: Mobile Presence i18n Translation File
+#
+# Filename: mobile-presence.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160205 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Set Device Image'''.ko=디바이스 이미지 설정
+# Events / Notifications
+'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
+'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
+'''present'''.ko=집안
+'''not present'''.ko=부재중

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -0,0 +1,14 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
+'''dry'''.ko=건조
+'''wet'''.ko=누수
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -0,0 +1,13 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -14,6 +14,8 @@
  *
  */
 
+//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
@@ -25,10 +27,6 @@ metadata {
         
         command "enrollResponse"
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 	}
 
 	simulator {
@@ -233,7 +231,7 @@ private Map getBatteryResult(rawValue) {
 	def volts = rawValue / 10
 	def descriptionText
 
-	if (rawValue == 0) {}
+    if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -0,0 +1,20 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+'''No'''.ko=아니요
+'''Tap to set'''.ko=눌러서 설정
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
+'''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''Yes'''.ko=예
+'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
+'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -72,15 +72,12 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -23,8 +24,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
  		command "enrollResponse"
- 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
+
  	}
 
  	simulator {
@@ -225,7 +225,8 @@ def getTemperature(value) {
 
 		def volts = rawValue / 10
 		def descriptionText
-		if (volts > 3.5) {
+        if (rawValue == 0 || rawValue == 255) {}
+		else if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -220,7 +220,8 @@ private Map getBatteryResult(rawValue) {
     
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -196,7 +196,8 @@ private Map getBatteryResult(rawValue) {
 
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -44,7 +44,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -39,7 +39,7 @@ metadata {
                 attributeState "level", action:"switch level.setLevel"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -63,7 +63,7 @@ metadata {
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -52,7 +52,7 @@
 		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+		standardTile("refresh", "device.refresh", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -57,7 +57,7 @@ metadata {
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -40,7 +40,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -42,7 +42,7 @@ metadata {
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -54,7 +54,7 @@ metadata {
             }
         }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -235,6 +235,7 @@ def connectionStatus(message, redirectUrl = null) {
 
 def getEcobeeThermostats() {
 	log.debug "getting device list"
+	atomicState.remoteSensors = []
 
 	def requestBody = '{"selection":{"selectionType":"registered","selectionMatch":"","includeRuntime":true,"includeSensors":true}}'
 
@@ -251,7 +252,7 @@ def getEcobeeThermostats() {
 
 			if (resp.status == 200) {
 				resp.data.thermostatList.each { stat ->
-					atomicState.remoteSensors = stat.remoteSensors
+					atomicState.remoteSensors = atomicState.remoteSensors == null ? stat.remoteSensors : atomicState.remoteSensors <<  stat.remoteSensors
 					def dni = [app.id, stat.identifier].join('.')
 					stats[dni] = getThermostatDisplayName(stat)
 				}
@@ -273,11 +274,14 @@ def getEcobeeThermostats() {
 
 Map sensorsDiscovered() {
 	def map = [:]
-	atomicState.remoteSensors.each {
-		if (it.type != "thermostat") {
-			def value = "${it?.name}"
-			def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
-			map["${key}"] = value
+	log.info "list ${atomicState.remoteSensors}"
+	atomicState.remoteSensors.each { sensors ->
+		sensors.each {
+			if (it.type != "thermostat") {
+				def value = "${it?.name}"
+				def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
+				map["${key}"] = value
+			}
 		}
 	}
 	atomicState.sensors = map
@@ -541,10 +545,15 @@ def updateSensorData() {
 				def occupancy = ""
 				it.capability.each {
 					if (it.type == "temperature") {
-						if (location.temperatureScale == "F") {
-							temperature = Math.round(it.value.toDouble() / 10)
+						if (it.value == "unknown") {
+							temperature = "--"
 						} else {
-							temperature = convertFtoC(it.value.toDouble() / 10)
+							if (location.temperatureScale == "F") {
+								temperature = Math.round(it.value.toDouble() / 10)
+							} else {
+								temperature = convertFtoC(it.value.toDouble() / 10)
+							}
+
 						}
 
 					} else if (it.type == "occupancy") {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -58,7 +58,7 @@ def bridgeDiscovery(params=[:])
     	state.bridges = [:]
         state.bridgeRefreshCount = 0
         app.updateSetting("selectedHue", "")
-    }    
+    }
 
 	subscribe(location, null, locationHandler, [filterEvents:false])
 
@@ -130,8 +130,8 @@ def bulbDiscovery() {
 	def bulboptions = bulbsDiscovered() ?: [:]
 	def numFound = bulboptions.size() ?: 0
     if (numFound == 0)
-    	app.updateSetting("selectedBulbs", "") 
-        
+    	app.updateSetting("selectedBulbs", "")
+
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
@@ -140,7 +140,7 @@ def bulbDiscovery() {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {				
+		section {
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -246,13 +246,13 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
-	unsubscribe() 
-    unschedule()    
+	unsubscribe()
+    unschedule()
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"  
+	log.debug "Initializing"
     unsubscribe(bridge)
     state.inBulbDiscovery = false
     state.bridgeRefreshCount = 0
@@ -281,18 +281,18 @@ def uninstalled(){
 def bulbListHandler(hub, data = "") {
 	def msg = "Bulbs list not processed. Only while in settings menu."
     def bulbs = [:]
-	if (state.inBulbDiscovery) {       
+	if (state.inBulbDiscovery) {
         def logg = ""
         log.trace "Adding bulbs to state..."
         state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)   
+        def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
-            if (v instanceof Map) 
+            if (v instanceof Map)
                 bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
         }
-    }  
+    }
     def bridge = null
-	if (selectedHue) 
+	if (selectedHue)
         bridge = getChildDevice(selectedHue)
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
@@ -318,7 +318,7 @@ def addBulbs() {
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
-			} else { 
+			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -344,7 +344,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true 
+            def newbridge = true
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -354,10 +354,10 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false 
+                        newbridge = false
                     }
-                }    
-            }  
+                }
+            }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
@@ -368,13 +368,13 @@ def addBridge() {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
                         childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
                     } else {
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
                         childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-                    }    
+                    }
 				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
                     childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
-                }    
+                }
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -436,7 +436,7 @@ def locationHandler(evt) {
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
                     d.updateDataValue("networkAddress", host)
-            	} 
+            	}
             }
 		}
 	}
@@ -455,7 +455,7 @@ def locationHandler(evt) {
 					log.error "/description.xml returned a bridge that didn't exist"
 				}
 			}
-		} else if(headerString?.contains("json")) {
+		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
             log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
@@ -494,16 +494,21 @@ def doDeviceSync(){
 	discoverBridges()
 }
 
+def isValidSource(macAddress) {
+	def vbridges = getVerifiedHueBridges()
+	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description) 
+	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
         def bodyString = parsedEvent.body.toString()
-		if (headerString?.contains("json")) { 
+		if (headerString?.contains("json")) {
         	def body
         	try {
             	body = new groovy.json.JsonSlurper().parseText(bodyString)
@@ -511,11 +516,11 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) { 
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
                     if (d) {
                         if (bulb.value.state?.reachable) {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
@@ -530,18 +535,18 @@ def parse(childDevice, description) {
                             }
                         } else {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])
                             if (bulb.value.state.sat) {
                                 def hue = 23
                                 def sat = 56
                                 def hex = colorUtil.hslToHex(23, 56)
                                 sendEvent(d.deviceNetworkId, [name: "color", value: hex])
                                 sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
-                            }    
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
                         }
                     }
-                }     
+                }
             }
             else
             { //put response
@@ -590,7 +595,7 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}        
+    	}
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
@@ -611,7 +616,7 @@ def off(childDevice) {
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-    def level 
+    def level
     if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
@@ -628,6 +633,14 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
+def setColorTemperature(childDevice, huesettings) {
+	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
+	def value = [ct: ct, on: true]
+	log.trace "sending command $value"
+	put("lights/${getId(childDevice)}/state", value)
+}
+
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
@@ -684,7 +697,7 @@ HOST: ${host}
 }
 
 private put(path, body) {
-	def host = getBridgeIP()	
+	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -710,11 +723,11 @@ private getBridgeIP() {
             	host =  d.getDeviceDataByName("networkAddress")
             else
         		host = d.latestState('networkAddress').stringValue
-        }    
+        }
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) { 
+            if (!bridge) {
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {
@@ -724,9 +737,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }    
+        }
         log.trace "Bridge: $selectedHue - Host: $host"
-    }    
+    }
     return host
 }
 

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -1,317 +1,317 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Smart Security
- *
- *  Author: SmartThings
- *  Date: 2013-03-07
- */
-definition(
-    name: "Smart Security",
-    namespace: "smartthings",
-    author: "SmartThings",
-    description: "Alerts you when there are intruders but not when you just got up for a glass of water in the middle of the night",
-    category: "Safety & Security",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/SafetyAndSecurity/App-IsItSafe.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/SafetyAndSecurity/App-IsItSafe@2x.png"
-)
-
-preferences {
-	section("Sensors detecting an intruder") {
-		input "intrusionMotions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
-		input "intrusionContacts", "capability.contactSensor", title: "Contact Sensors", multiple: true, required: false
-	}
-	section("Sensors detecting residents") {
-		input "residentMotions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
-	}
-	section("Alarm settings and actions") {
-		input "alarms", "capability.alarm", title: "Which Alarm(s)", multiple: true, required: false
-        input "silent", "enum", options: ["Yes","No"], title: "Silent alarm only (Yes/No)"
-		input "seconds", "number", title: "Delay in seconds before siren sounds"
-		input "lights", "capability.switch", title: "Flash these lights (optional)", multiple: true, required: false
-		input "newMode", "mode", title: "Change to this mode (optional)", required: false
-	}
-	section("Notify others (optional)") {
-		input "textMessage", "text", title: "Send this message", multiple: false, required: false
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone", "phone", title: "To this phone", multiple: false, required: false
-        }
-	}
-	section("Arm system when residents quiet for (default 3 minutes)") {
-		input "residentsQuietThreshold", "number", title: "Time in minutes", required: false
-	}
-}
-
-def installed() {
-	log.debug "INSTALLED"
-	subscribeToEvents()
-	state.alarmActive = null
-}
-
-def updated() {
-	log.debug "UPDATED"
-	unsubscribe()
-	subscribeToEvents()
-	unschedule()
-	state.alarmActive = null
-	state.residentsAreUp = null
-	state.lastIntruderMotion = null
-	alarms?.off()
-}
-
-private subscribeToEvents()
-{
-	subscribe intrusionMotions, "motion", intruderMotion
-	subscribe residentMotions, "motion", residentMotion
-	subscribe intrusionContacts, "contact", contact
-	subscribe alarms, "alarm", alarm
-	subscribe(app, appTouch)
-}
-
-private residentsHaveBeenQuiet()
-{
-	def threshold = ((residentsQuietThreshold != null && residentsQuietThreshold != "") ? residentsQuietThreshold : 3) * 60 * 1000
-	def result = true
-	def t0 = new Date(now() - threshold)
-	for (sensor in residentMotions) {
-		def recentStates = sensor.statesSince("motion", t0)
-		if (recentStates.find{it.value == "active"}) {
-			result = false
-			break
-		}
-	}
-	log.debug "residentsHaveBeenQuiet: $result"
-	result
-}
-
-private intruderMotionInactive()
-{
-	def result = true
-	for (sensor in intrusionMotions) {
-		if (sensor.currentMotion == "active") {
-			result = false
-			break
-		}
-	}
-	result
-}
-
-private isResidentMotionSensor(evt)
-{
-	residentMotions?.find{it.id == evt.deviceId} != null
-}
-
-def appTouch(evt)
-{
-	alarms?.off()
-	state.alarmActive = false
-}
-
-// Here to handle old subscriptions
-def motion(evt)
-{
-	if (isResidentMotionSensor(evt)) {
-		log.debug "resident motion, $evt.name: $evt.value"
-		residentMotion(evt)
-	}
-	else {
-		log.debug "intruder motion, $evt.name: $evt.value"
-		intruderMotion(evt)
-	}
-}
-
-def intruderMotion(evt)
-{
-	if (evt.value == "active") {
-		log.debug "motion by potential intruder, residentsAreUp: $state.residentsAreUp"
-		if (!state.residentsAreUp) {
-			log.trace "checking if residents have been quiet"
-			if (residentsHaveBeenQuiet()) {
-				log.trace "calling startAlarmSequence"
-				startAlarmSequence()
-			}
-			else {
-				log.trace "calling disarmIntrusionDetection"
-				disarmIntrusionDetection()
-			}
-		}
-	}
-	state.lastIntruderMotion = now()
-}
-
-def residentMotion(evt)
-{
-	// Don't think we need this any more
-	//if (evt.value == "inactive") {
-	//	if (state.residentsAreUp) {
-	//    	startReArmSequence()
-	//    }
-	//}
-}
-
-def contact(evt)
-{
-	if (evt.value == "open") {
-		// TODO - check for residents being up?
-		if (!state.residentsAreUp) {
-			if (residentsHaveBeenQuiet()) {
-				startAlarmSequence()
-			}
-			else {
-				disarmIntrusionDetection()
-			}
-		}
-	}
-}
-
-def alarm(evt)
-{
-	log.debug "$evt.name: $evt.value"
-	if (evt.value == "off") {
-		alarms?.off()
-		state.alarmActive = false
-	}
-}
-
-private disarmIntrusionDetection()
-{
-	log.debug "residents are up, disarming intrusion detection"
-	state.residentsAreUp = true
-	scheduleReArmCheck()
-}
-
-private scheduleReArmCheck()
-{
-	def cron = "0 * * * * ?"
-	schedule(cron, "checkForReArm")
-	log.debug "Starting re-arm check, cron: $cron"
-}
-
-def checkForReArm()
-{
-	def threshold = ((residentsQuietThreshold != null && residentsQuietThreshold != "") ? residentsQuietThreshold : 3) * 60 * 1000
-	log.debug "checkForReArm: threshold is $threshold"
-	// check last intruder motion
-	def lastIntruderMotion = state.lastIntruderMotion
-	log.debug "checkForReArm: lastIntruderMotion=$lastIntruderMotion"
-	if (lastIntruderMotion != null)
-	{
-		log.debug "checkForReArm, time since last intruder motion: ${now() - lastIntruderMotion}"
-		if (now() - lastIntruderMotion > threshold) {
-			log.debug "re-arming intrusion detection"
-			state.residentsAreUp = false
-			unschedule()
-		}
-	}
-	else {
-		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
-	}	
-}
-
-private startAlarmSequence()
-{
-	if (state.alarmActive) {
-		log.debug "alarm already active"
-	}
-	else {
-		state.alarmActive = true
-		log.debug "starting alarm sequence"
-
-		sendPush("Potential intruder detected!")
-
-		if (newMode) {
-			setLocationMode(newMode)
-		}
-
-		if (silentAlarm()) {
-			log.debug "Silent alarm only"
-			alarms?.strobe()
-            if (location.contactBookEnabled) {
-                sendNotificationToContacts(textMessage ?: "Potential intruder detected", recipients)
-            }
-            else {
-                if (phone) {
-                    sendSms(phone, textMessage ?: "Potential intruder detected")
-                }
-            }
-		}
-		else {
-			def delayTime = seconds
-			if (delayTime) {
-				alarms?.strobe()
-				runIn(delayTime, "soundSiren")
-				log.debug "Sounding siren in $delayTime seconds"
-			}
-			else {
-				soundSiren()
-			}
-		}
-
-		if (lights) {
-			flashLights(Math.min((seconds/2) as Integer, 10))
-		}
-	}
-}
-
-def soundSiren()
-{
-	if (state.alarmActive) {
-		log.debug "Sounding siren"
-        if (location.contactBookEnabled) {
-            sendNotificationToContacts(textMessage ?: "Potential intruder detected", recipients)
-        }
-        else {
-            if (phone) {
-                sendSms(phone, textMessage ?: "Potential intruder detected")
-            }
-        }
-		alarms?.both()
-		if (lights) {
-			log.debug "continue flashing lights"
-			continueFlashing()
-		}
-	}
-	else {
-		log.debug "alarm activation aborted"
-	}
-	unschedule("soundSiren") // Temporary work-around to scheduling bug
-}
-
-def continueFlashing()
-{
-	unschedule()
-	if (state.alarmActive) {
-		flashLights(10)
-		schedule(util.cronExpression(now() + 10000), "continueFlashing")
-	}
-}
-
-private flashLights(numFlashes) {
-	def onFor = 1000
-	def offFor = 1000
-
-	log.debug "FLASHING $numFlashes times"
-	def delay = 1L
-	numFlashes.times {
-		log.trace "Switch on after  $delay msec"
-		lights?.on(delay: delay)
-		delay += onFor
-		log.trace "Switch off after $delay msec"
-		lights?.off(delay: delay)
-		delay += offFor
-	}
-}
-
-private silentAlarm()
-{
-	silent?.toLowerCase() in ["yes","true","y"]
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Smart Security
+ *
+ *  Author: SmartThings
+ *  Date: 2013-03-07
+ */
+definition(
+    name: "Smart Security",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Alerts you when there are intruders but not when you just got up for a glass of water in the middle of the night",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/SafetyAndSecurity/App-IsItSafe.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/SafetyAndSecurity/App-IsItSafe@2x.png"
+)
+
+preferences {
+	section("Sensors detecting an intruder") {
+		input "intrusionMotions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
+		input "intrusionContacts", "capability.contactSensor", title: "Contact Sensors", multiple: true, required: false
+	}
+	section("Sensors detecting residents") {
+		input "residentMotions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
+	}
+	section("Alarm settings and actions") {
+		input "alarms", "capability.alarm", title: "Which Alarm(s)", multiple: true, required: false
+        input "silent", "enum", options: ["Yes","No"], title: "Silent alarm only (Yes/No)"
+		input "seconds", "number", title: "Delay in seconds before siren sounds"
+		input "lights", "capability.switch", title: "Flash these lights (optional)", multiple: true, required: false
+		input "newMode", "mode", title: "Change to this mode (optional)", required: false
+	}
+	section("Notify others (optional)") {
+		input "textMessage", "text", title: "Send this message", multiple: false, required: false
+        input("recipients", "contact", title: "Send notifications to") {
+            input "phone", "phone", title: "To this phone", multiple: false, required: false
+        }
+	}
+	section("Arm system when residents quiet for (default 3 minutes)") {
+		input "residentsQuietThreshold", "number", title: "Time in minutes", required: false
+	}
+}
+
+def installed() {
+	log.debug "INSTALLED"
+	subscribeToEvents()
+	state.alarmActive = null
+}
+
+def updated() {
+	log.debug "UPDATED"
+	unsubscribe()
+	subscribeToEvents()
+	unschedule()
+	state.alarmActive = null
+	state.residentsAreUp = null
+	state.lastIntruderMotion = null
+	alarms?.off()
+}
+
+private subscribeToEvents()
+{
+	subscribe intrusionMotions, "motion", intruderMotion
+	subscribe residentMotions, "motion", residentMotion
+	subscribe intrusionContacts, "contact", contact
+	subscribe alarms, "alarm", alarm
+	subscribe(app, appTouch)
+}
+
+private residentsHaveBeenQuiet()
+{
+	def threshold = ((residentsQuietThreshold != null && residentsQuietThreshold != "") ? residentsQuietThreshold : 3) * 60 * 1000
+	def result = true
+	def t0 = new Date(now() - threshold)
+	for (sensor in residentMotions) {
+		def recentStates = sensor.statesSince("motion", t0)
+		if (recentStates.find{it.value == "active"}) {
+			result = false
+			break
+		}
+	}
+	log.debug "residentsHaveBeenQuiet: $result"
+	result
+}
+
+private intruderMotionInactive()
+{
+	def result = true
+	for (sensor in intrusionMotions) {
+		if (sensor.currentMotion == "active") {
+			result = false
+			break
+		}
+	}
+	result
+}
+
+private isResidentMotionSensor(evt)
+{
+	residentMotions?.find{it.id == evt.deviceId} != null
+}
+
+def appTouch(evt)
+{
+	alarms?.off()
+	state.alarmActive = false
+}
+
+// Here to handle old subscriptions
+def motion(evt)
+{
+	if (isResidentMotionSensor(evt)) {
+		log.debug "resident motion, $evt.name: $evt.value"
+		residentMotion(evt)
+	}
+	else {
+		log.debug "intruder motion, $evt.name: $evt.value"
+		intruderMotion(evt)
+	}
+}
+
+def intruderMotion(evt)
+{
+	if (evt.value == "active") {
+		log.debug "motion by potential intruder, residentsAreUp: $state.residentsAreUp"
+		if (!state.residentsAreUp) {
+			log.trace "checking if residents have been quiet"
+			if (residentsHaveBeenQuiet()) {
+				log.trace "calling startAlarmSequence"
+				startAlarmSequence()
+			}
+			else {
+				log.trace "calling disarmIntrusionDetection"
+				disarmIntrusionDetection()
+			}
+		}
+	}
+	state.lastIntruderMotion = now()
+}
+
+def residentMotion(evt)
+{
+	// Don't think we need this any more
+	//if (evt.value == "inactive") {
+	//	if (state.residentsAreUp) {
+	//    	startReArmSequence()
+	//    }
+	//}
+}
+
+def contact(evt)
+{
+	if (evt.value == "open") {
+		// TODO - check for residents being up?
+		if (!state.residentsAreUp) {
+			if (residentsHaveBeenQuiet()) {
+				startAlarmSequence()
+			}
+			else {
+				disarmIntrusionDetection()
+			}
+		}
+	}
+}
+
+def alarm(evt)
+{
+	log.debug "$evt.name: $evt.value"
+	if (evt.value == "off") {
+		alarms?.off()
+		state.alarmActive = false
+	}
+}
+
+private disarmIntrusionDetection()
+{
+	log.debug "residents are up, disarming intrusion detection"
+	state.residentsAreUp = true
+	scheduleReArmCheck()
+}
+
+private scheduleReArmCheck()
+{
+	def cron = "0 * * * * ?"
+	schedule(cron, "checkForReArm")
+	log.debug "Starting re-arm check, cron: $cron"
+}
+
+def checkForReArm()
+{
+	def threshold = ((residentsQuietThreshold != null && residentsQuietThreshold != "") ? residentsQuietThreshold : 3) * 60 * 1000
+	log.debug "checkForReArm: threshold is $threshold"
+	// check last intruder motion
+	def lastIntruderMotion = state.lastIntruderMotion
+	log.debug "checkForReArm: lastIntruderMotion=$lastIntruderMotion"
+	if (lastIntruderMotion != null)
+	{
+		log.debug "checkForReArm, time since last intruder motion: ${now() - lastIntruderMotion}"
+		if (now() - lastIntruderMotion > threshold) {
+			log.debug "re-arming intrusion detection"
+			state.residentsAreUp = false
+			unschedule()
+		}
+	}
+	else {
+		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
+	}	
+}
+
+private startAlarmSequence()
+{
+	if (state.alarmActive) {
+		log.debug "alarm already active"
+	}
+	else {
+		state.alarmActive = true
+		log.debug "starting alarm sequence"
+
+		sendPush("Potential intruder detected!")
+
+		if (newMode) {
+			setLocationMode(newMode)
+		}
+
+		if (silentAlarm()) {
+			log.debug "Silent alarm only"
+			alarms?.strobe()
+            if (location.contactBookEnabled) {
+                sendNotificationToContacts(textMessage ?: "Potential intruder detected", recipients)
+            }
+            else {
+                if (phone) {
+                    sendSms(phone, textMessage ?: "Potential intruder detected")
+                }
+            }
+		}
+		else {
+			def delayTime = seconds
+			if (delayTime) {
+				alarms?.strobe()
+				runIn(delayTime, "soundSiren")
+				log.debug "Sounding siren in $delayTime seconds"
+			}
+			else {
+				soundSiren()
+			}
+		}
+
+		if (lights) {
+			flashLights(Math.min((seconds/2) as Integer, 10))
+		}
+	}
+}
+
+def soundSiren()
+{
+	if (state.alarmActive) {
+		log.debug "Sounding siren"
+        if (location.contactBookEnabled) {
+            sendNotificationToContacts(textMessage ?: "Potential intruder detected", recipients)
+        }
+        else {
+            if (phone) {
+                sendSms(phone, textMessage ?: "Potential intruder detected")
+            }
+        }
+		alarms?.both()
+		if (lights) {
+			log.debug "continue flashing lights"
+			continueFlashing()
+		}
+	}
+	else {
+		log.debug "alarm activation aborted"
+	}
+	unschedule("soundSiren") // Temporary work-around to scheduling bug
+}
+
+def continueFlashing()
+{
+	unschedule()
+	if (state.alarmActive) {
+		flashLights(10)
+		schedule(util.cronExpression(now() + 10000), "continueFlashing")
+	}
+}
+
+private flashLights(numFlashes) {
+	def onFor = 1000
+	def offFor = 1000
+
+	log.debug "FLASHING $numFlashes times"
+	def delay = 1L
+	numFlashes.times {
+		log.trace "Switch on after  $delay msec"
+		lights?.on(delay: delay)
+		delay += onFor
+		log.trace "Switch off after $delay msec"
+		lights?.off(delay: delay)
+		delay += offFor
+	}
+}
+
+private silentAlarm()
+{
+	silent?.toLowerCase() in ["yes","true","y"]
+}