MSA-958: This module controls light bulbs along with door open/close sensors. If a light bulb is already on when a door opens, it stays on. Else, it will switch off after specified interval.

[DVCSMP-1107] Prepping up v1 multi for garage door functionality

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,6 +11,17 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+ 
+ /*
+ *  Purpose: Arrival Sensor HA DTH File
+ *
+ *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
+ *
+ *  Change History:
+ *  1. 20160115 TW - Update/Edit to support i18n translations
+ *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
+ */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -32,7 +43,7 @@ metadata {
                 ])
         }
         section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            input "checkInterval", "enum", title: "Presence timeout (minutes)", description: "Tap to set",
                     defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
         }
     }
@@ -82,7 +93,6 @@ def parse(String description) {
 
 private handleReportAttributeMessage(String description) {
     def descMap = zigbee.parseDescriptionAsMap(description)
-
     if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
         handleBatteryEvent(Integer.parseInt(descMap.value, 16))
     }
@@ -94,6 +104,7 @@ private handleReportAttributeMessage(String description) {
  * @param volts Battery voltage in .1V increments
  */
 private handleBatteryEvent(volts) {
+	def descriptionText
     if (volts == 0 || volts == 255) {
         log.debug "Ignoring invalid value for voltage (${volts/10}V)"
     }
@@ -107,15 +118,17 @@ private handleBatteryEvent(volts) {
             volts = minVolts
         else if (volts > maxVolts)
             volts = maxVolts
-        def pct = batteryMap[volts]
-        if (pct != null) {
+        def value = batteryMap[volts]
+        if (value != null) {
             def linkText = getLinkText(device)
+            descriptionText = '{{ linkText }} battery was {{ value }}'
             def eventMap = [
                 name: 'battery',
-                value: pct,
-                descriptionText: "${linkText} battery was ${pct}%"
+                value: value,
+                descriptionText: descriptionText,
+                translatable: true
             ]
-            log.debug "Creating battery event for voltage=${volts/10}V: ${eventMap}"
+            log.debug "Creating battery event for voltage=${volts/10}V: ${linkText} ${eventMap.name} is ${eventMap.value}%"
             sendEvent(eventMap)
         }
     }
@@ -131,13 +144,19 @@ private handlePresenceEvent(present) {
         stopTimer()
     }
     def linkText = getLinkText(device)
+    def descriptionText
+    if ( present )
+    	descriptionText = "{{ linkText }} has arrived"
+    else
+    	descriptionText = "{{ linkText }} has left"
     def eventMap = [
         name: "presence",
         value: present ? "present" : "not present",
         linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+        descriptionText: descriptionText,
+        translatable: true
     ]
-    log.debug "Creating presence event: ${eventMap}"
+    log.debug "Creating presence event: ${device.displayName} ${eventMap.name} is ${eventMap.value}"
     sendEvent(eventMap)
 }
 
@@ -158,4 +177,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -0,0 +1,35 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: Arrival Sensor HA i18n Translation File
+#
+# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160115 TW Initial release with informal Korean translation.
+#	2. 20160121 TW Added def preference section titles.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Set Device Image'''.ko=기기 이미지 설정
+'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Tap to set'''.ko=눌러서 설정
+'''Arrival Sensor'''.ko=도착알림 센서
+# Events / Notifications
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
+'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+#==============================================================================

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Motion Sensor"
 		capability "Refresh"
-		capability "Polling"
 	}
 
 	tiles {
@@ -68,6 +67,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild(this)
+	parent.pollChild()
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
 		capability "Thermostat"
 		capability "Temperature Measurement"
-		capability "Polling"
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
@@ -134,9 +133,7 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-
-	def results = parent.pollChild(this)
-	generateEvent(results) //parse received message from parent
+	parent.pollChild()
 }
 
 def generateEvent(Map results) {

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,97 +1,96 @@
-/**
- *  Hue Lux Bulb
- *
- *  Author: SmartThings
- */
-// for the UI
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Color Temperature"
-		capability "Switch"
-		capability "Refresh"
-		capability "Sensor"
-
-        command "refresh"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-    tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
-        }
-
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-        }
-				
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["rich-control", "colorTempSliderControl","refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-	log.debug "parse() - $description"
-	def results = []
-
-	def map = description
-	if (description instanceof String)  {
-		log.debug "Hue Bulb stringToMap - ${map}"
-		map = stringToMap(description)
-	}
-
-	if (map?.name && map?.value) {
-		results << createEvent(name: "${map?.name}", value: "${map?.value}")
-	}
-	results
-}
-
-// handle commands
-void on() {
-	parent.on(this)
-	sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-	parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void setLevel(percent) {
-	log.debug "Executing 'setLevel'"
-	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent)
-}
-
-void refresh() {
-	log.debug "Executing 'refresh'"
-	parent.manualRefresh()
-}
+/**
+ *  Hue Lux Bulb
+ *
+ *  Author: SmartThings
+ */
+// for the UI
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+        command "refresh"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
+        }
+
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+void on() {
+	parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+	parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+	log.debug "Executing 'setLevel'"
+	parent.setLevel(this, percent)
+	sendEvent(name: "level", value: percent)
+}
+
+void refresh() {
+	log.debug "Executing 'refresh'"
+	parent.manualRefresh()
+}

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -19,13 +19,14 @@
 #
 # Change History:
 #	1. 20160205 TW Initial release with informal Korean translation.
+#	2. 20160224 TW Updated with formal Korean translation.
 #==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Set Device Image'''.ko=디바이스 이미지 설정
+'''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
-'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
+'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
 '''present'''.ko=집안
-'''not present'''.ko=부재중
+'''not present'''.ko=외출

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,16 +1,28 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: Mobile Presence DTH File
  *
+ *  Filename: mobile-presence.src/mobile-presence.groovy
+ *
+ *  Change History:
+ *  1. 20160205 TW - Update/Edit to support i18n translations
+===============================================================================
  */
+ 
 metadata {
 	definition (name: "Mobile Presence", namespace: "smartthings", author: "SmartThings") {
 		capability "Presence Sensor"
@@ -41,6 +53,7 @@ def parse(String description) {
 	def isStateChange = isStateChange(device, name, value)
 
 	def results = [
+    	translatable: true,
 		name: name,
 		value: value,
 		unit: null,
@@ -72,8 +85,8 @@ private String parseValue(String description) {
 
 private parseDescriptionText(String linkText, String value, String description) {
 	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
+		case "present": return "{{ linkText }} has arrived"
+		case "not present": return "{{ linkText }} has left"
 		default: return value
 	}
 }
@@ -84,4 +97,4 @@ private getState(String value) {
 		case "not present": return "left"
 		default: return value
 	}
-}
+}

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -0,0 +1,30 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartPower Outlet i18n Translation File
+#
+# Filename: SmartPower-Outlet.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
+#==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,20 +1,28 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartPower Outlet DTH File
  *
- *	SmartPower Outlet (CentraLite)
+ *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
  *
- *	Author: SmartThings
- *	Date: 2015-08-23
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -91,22 +99,24 @@ def parse(String description) {
 		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
 
 	if (finalResult) {
-		log.info finalResult
+		log.info "final result = $finalResult"
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
+			def value = (finalResult.value as Integer)/10
+			createEvent(name: "power", value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
 				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
 			*/
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+        	if ( finalResult.value == "on" )
+				createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is On', translatable: true)
+            else
+            	createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is Off', translatable: true)
 		}
 	}
 	else {
@@ -167,4 +177,4 @@ def getPowerDescription(descMap) {
 	else {
 		return [:]
 	}
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,14 +1,40 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
-'''battery'''.ko=배터리
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Moisture Sensor i18n Translation File
+#
+# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
 '''dry'''.ko=건조
 '''wet'''.ko=누수
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
+'''battery'''.ko=배터리
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
+'''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+#==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,18 +1,29 @@
-/**
- *  SmartSense Moisture Sensor
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Moisture Sensor DTH File
  *
+ *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
+
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
@@ -20,18 +31,17 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-
-		command "enrollResponse"
-
+        
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
@@ -43,11 +53,11 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -56,7 +66,7 @@ metadata {
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
+			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -78,7 +88,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -92,59 +102,59 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +163,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,42 +177,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMoistureResult('dry')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0022': // Tamper Alarm
+            break
 
-		case '0x0022': // Tamper Alarm
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	 log.debug 'dry with tamper alarm'
+        	resultMap = getMoistureResult('dry')
+            break
 
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0025': // Restore Report
+        	log.debug 'water with tamper alarm'
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0026': // Trouble/Failure
+            break
 
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -220,7 +230,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -228,10 +239,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -245,7 +256,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -253,44 +265,53 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
 
 	return result
 }
-
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMoistureResult(value) {
-	log.debug 'water'
-	String descriptionText = "${device.displayName} is ${value}"
+	log.debug "water" 
+    def descriptionText
+    if ( value == "wet" )
+    	descriptionText = '{{ device.displayName }} is wet'
+    else
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
 		name: 'water',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -300,32 +321,32 @@ def refresh() {
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def configCmds = [	
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
+    [
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
+    ]
 }
 
 private getEndpointId() {
@@ -337,19 +358,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,13 +1,39 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Motion Sensor i18n Translation File
+#
+# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
 '''battery'''.ko=배터리
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+#==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,17 +1,27 @@
-/**
- *  SmartSense Motion/Temp Sensor
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Motion Sensor DTH File
  *
+ *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
@@ -19,18 +29,17 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-		capability "Temperature Measurement"
+        capability "Temperature Measurement"
 		capability "Refresh"
-
-		command "enrollResponse"
+        
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -47,7 +56,7 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
@@ -86,7 +95,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -97,55 +106,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0x0406:
-				log.debug 'motion'
-				resultMap.name = 'motion'
-				break
-		}
-	}
+            	log.debug 'motion'
+                resultMap.name = 'motion'
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -154,7 +163,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -163,14 +172,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
-	}
-
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	resultMap = getMotionResult(value)
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -181,44 +190,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMotionResult('inactive')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
+        case '0x0022': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+        	resultMap = getMotionResult('inactive')
+            break
 
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0025': // Restore Report
+            break
 
-		case '0x0025': // Restore Report
-			break
+        case '0x0026': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -236,7 +245,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -244,10 +254,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -261,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -269,7 +280,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -279,33 +290,39 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMotionResult(value) {
 	log.debug 'motion'
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
+    //String descriptionText = '{{ device.displayName }} is {{ value | translate }}'
 	return [
 		name: 'motion',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 def refresh() {
-	log.debug "refresh called"
+	log.debug "refresh executed"
 	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
@@ -355,19 +372,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,20 +1,46 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Multi Sensor i18n Translation File
+#
+# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160117 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Yes'''.ko=예
 '''No'''.ko=아니요
-'''Tap to set'''.ko=눌러서 설정
+'''battery'''.ko=배터리
 '''Temperature Offset'''.ko=온도 직접 설정
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+'''Tap to set'''.ko=눌러서 설정
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Yes'''.ko=예
 '''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
 '''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,41 +1,50 @@
-/**
- *  SmartSense Multi
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Multi Sensor DTH File
  *
+ *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
-metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Three Axis"
+ metadata {
+ 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+        capability "Three Axis"
 		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
+ 		capability "Configuration"
+        capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-
+        
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
-	}
+ 	}
 
-	simulator {
+ 	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -52,7 +61,7 @@ metadata {
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
-	preferences {
+ 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -62,13 +71,13 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", translatable: true, description: "Tap to set", options: ["Yes","No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
-	}
+ 	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -100,16 +109,19 @@ metadata {
 				]
 			)
 		}
+		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
+			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
+		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+ 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+ 		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
 	}
  }
 
@@ -118,61 +130,61 @@ def parse(String description) {
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
 	}
-	else if (description?.startsWith('temperature: ')) {
+    else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
 	else if (description?.startsWith('zone status')) {
 		map = parseIasMessage(description)
 	}
 
-	def result = map ? createEvent(map) : null
+ 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
-	}
+    else if (description?.startsWith('read attr -')) {
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
+    }
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	log.debug cluster
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
-			break
+ private Map parseCatchAllMessage(String description) {
+ 	Map resultMap = [:]
+ 	def cluster = zigbee.parse(description)
+    log.debug cluster
+ 	if (shouldProcessMessage(cluster)) {
+ 		switch(cluster.clusterId) {
+ 			case 0x0001:
+ 			resultMap = getBatteryResult(cluster.data.last())
+ 			break
 
-			case 0xFC02:
-			log.debug 'ACCELERATION'
-			break
+ 			case 0xFC02:
+            log.debug 'ACCELERATION'
+ 			break
 
-			case 0x0402:
-			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+ 			case 0x0402:
+ 			log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+            }
+        }
 
-	return resultMap
-}
+        return resultMap
+    }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-	cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
-	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    cluster.command == 0x0B ||
+    cluster.command == 0x07 ||
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
 private List parseReportAttributeMessage(String description) {
@@ -199,12 +211,10 @@ private List parseReportAttributeMessage(String description) {
 			result << parseAxis(threeAxisAttributes)
 			descMap.value = descMap.value[-2..-1]
 		}
-		result << getAccelerationResult(descMap.value)
+        result << getAccelerationResult(descMap.value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -228,43 +238,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0022': // Tamper Alarm
-		break
+        case '0x0022': // Tamper Alarm
+        break
 
-		case '0x0023': // Battery Alarm
-		break
+        case '0x0023': // Battery Alarm
+        break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0026': // Trouble/Failure
-		break
+        case '0x0026': // Trouble/Failure
+        break
 
-		case '0x0028': // Test Mode
-		break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+        break
+    }
+    return resultMap
 }
 
 def updated() {
@@ -273,19 +283,19 @@ def updated() {
 	if (garageSensor == "Yes") {
 		def descriptionText = "Updating device to garage sensor"
 		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
 		def descriptionText = "Updating device to open/close sensor"
 		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 }
@@ -305,7 +315,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -313,10 +324,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -330,7 +341,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -338,7 +350,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -347,41 +359,71 @@ private Map getBatteryResult(rawValue) {
 }
 
 private Map getTemperatureResult(value) {
-	log.debug "Temperature"
-	def linkText = getLinkText(device)
+	log.debug 'TEMP'
+    def name = "temperature"
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getContactResult(value) {
-	log.debug "Contact"
-	def linkText = getLinkText(device)
-	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText)
-}
-
-private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
-	def name = "acceleration"
-	def value = numValue.endsWith("1") ? "active" : "inactive"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value"
-	def isStateChange = isStateChange(device, name, value)
-	[
+	log.debug "Contact: ${device.displayName} value = ${value}"
+    def name = "contact"
+    
+    def descriptionText    
+    if ( value == 'open' )    
+		descriptionText = '{{ device.displayName }} was opened'
+    else
+    	descriptionText = '{{ device.displayName }} was closed'
+        
+    sendEvent(name: 'status', value: value, descriptionText: descriptionText, displayed: false)
+    def isStateChange = isStateChange(device, name, value)
+	return [
 		name: name,
 		value: value,
 		descriptionText: descriptionText,
-		isStateChange: isStateChange
+        isStateChange: isStateChange,
+        translatable: true
+	]
+	
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration is $value"
+	def name = "acceleration"
+    def value
+    def descriptionText
+    
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
 	]
 }
 
@@ -431,38 +473,37 @@ def refresh() {
 
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting"
-
+	log.debug "Configuring Device Reporting"
+		
 	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
-
+	]
 	return configCmds + refresh()
 }
 
@@ -478,12 +519,17 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
 private Map parseAxis(String description) {
+	def hexToSignedInt = { hexVal ->
+		def unsignedVal = hexToInt(hexVal)
+		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+	}
+
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -510,11 +556,6 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
-private hexToSignedInt(hexVal) {
-	def unsignedVal = hexToInt(hexVal)
-	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-}
-
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -529,9 +570,14 @@ def garageEvent(zValue) {
 	}
 	if (contactValue != null){
 		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
+        if ( contactValue == 'open' ) {
+        	descriptionText: '{{ device.displayName }} was opened'
+            sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was opened', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was opened', translatable: true)
+        } else {
+			sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was closed', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was closed', translatable: true)
+        }
 	}
 }
 
@@ -586,4 +632,4 @@ private byte[] reverseArray(byte[] array) {
 		i++;
 	}
 	return array
-}
+}

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -22,6 +22,8 @@ metadata {
 		capability "Battery"
 
 		fingerprint profileId: "FC01", deviceId: "0139"
+
+		attribute "status", "string"
 	}
 
 	simulator {
@@ -99,7 +101,7 @@ def parse(String description) {
 
 }
 
-private Map parseSingleMessage(description) {
+private List parseSingleMessage(description) {
 
 	def name = parseName(description)
 	def value = parseValue(description)
@@ -108,8 +110,9 @@ private Map parseSingleMessage(description) {
 	def handlerName = value == 'open' ? 'opened' : value
 	def isStateChange = isStateChange(device, name, value)
 
-	def results = [
-		name: name,
+	def results = []
+	results << createEvent(
+		name: "contact",
 		value: value,
 		unit: null,
 		linkText: linkText,
@@ -117,8 +120,18 @@ private Map parseSingleMessage(description) {
 		handlerName: handlerName,
 		isStateChange: isStateChange,
 		displayed: displayed(description, isStateChange)
-	]
-	log.debug "Parse results for $device: $results"
+	)
+
+	results << createEvent(
+		name: "status",
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	)
 
 	results
 }
@@ -269,7 +282,7 @@ private List parseRssiLqiMessage(String description) {
 	results
 }
 
-private getContactResult(part, description) {
+private List getContactResult(part, description) {
 	def name = "contact"
 	def value = part.endsWith("1") ? "open" : "closed"
 	def handlerName = value == 'open' ? 'opened' : value
@@ -277,16 +290,30 @@ private getContactResult(part, description) {
 	def descriptionText = "$linkText was $handlerName"
 	def isStateChange = isStateChange(device, name, value)
 
-	[
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
+	def results = []
+	results << createEvent(
+			name: "contact",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed:false
+	)
+
+	results << createEvent(
+			name: "status",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed: displayed(description, isStateChange)
+	)
+
+	results
 }
 
 private getAccelerationResult(part, description) {
@@ -449,6 +476,7 @@ private Boolean isOrientationMessage(String description) {
 	description ==~ /x:.*y:.*z:.*rssi:.*lqi:.*/
 }
 
+//Note: Not using this method anymore
 private String parseName(String description) {
 	if (isSupportedDescription(description)) {
 		return "contact"

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -463,29 +463,33 @@ def pollChildren(child = null) {
 }
 
 // Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild(child){
+def pollChild(){
 
-	if (pollChildren(child)){
-		if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
-			if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
-				def tData = atomicState.thermostats[child.device.deviceNetworkId]
-				log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
-				child.generateEvent(tData.data) //parse received message from parent
-			} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-				log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
-				return null
+	def devices = getChildDevices()
+
+	if (pollChildren()){
+		devices.each { child ->
+			log.info "***found $child"
+			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
+					def tData = atomicState.thermostats[child.device.deviceNetworkId]
+					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
+					child.generateEvent(tData.data) //parse received message from parent
+				} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
+					log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
+					return null
+				}
 			}
 		}
 	} else {
-		log.info "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling"
+		log.info "ERROR: pollChildren()"
 		return null
 	}
 
 }
 
 void poll() {
-	def devices = getChildDevices()
-	devices.each {pollChild(it)}
+	pollChild()
 }
 
 def availableModes(child) {

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -1,31 +1,31 @@
-'''Acceleration Detected'''.ko=가속화 감지됨
-'''Arrival Of'''.ko=도착
-'''Both Push and SMS?'''.ko=푸시 메시지와 SMS를 모두 사용하시겠습니까?
-'''Button Pushed'''.ko=버튼이 눌렸습니다
-'''Contact Closes'''.ko=접점 닫힘
-'''Contact Opens'''.ko=접점 열림
-'''Departure Of'''.ko=출발
+'''Acceleration Detected'''.ko=가속이 감지되었을 때
+'''Arrival Of'''.ko=도착했을 때
+'''Both Push and SMS?'''.ko=푸시 알람과 SMS 모두 사용
+'''Button Pushed'''.ko=버튼이 눌렸을 때
+'''Contact Closes'''.ko=닫힘이 감지되었을 때
+'''Contact Opens'''.ko=열림이 감지되었을 때
+'''Departure Of'''.ko=출발할 때
 '''Message Text'''.ko=문자 메시지
-'''Minutes'''.ko=분
-'''Motion Here'''.ko=동작
-'''Phone Number (for SMS, optional)'''.ko=휴대전화 번호(문자 메시지 - 옵션)
+'''Minutes'''.ko=메시지 전송 간격(분)
+'''Motion Here'''.ko=움직임이 감지되었을 때
+'''Phone Number (for SMS, optional)'''.ko=전화번호 (옵션)
 '''Receive notifications when anything happens in your home.'''.ko=집 안에 무슨 일이 일어나면 알림이 전송됩니다.
-'''Smoke Detected'''.ko=연기가 감지되었습니다
-'''Switch Turned Off'''.ko=스위치 꺼짐
-'''Switch Turned On'''.ko=스위치 꺼짐
-'''Choose one or more, when...'''.ko=다음의 경우 하나 이상 선택
+'''Smoke Detected'''.ko=연기가 감지되었을 때
+'''Switch Turned Off'''.ko=스위치가 꺼졌을 때
+'''Switch Turned On'''.ko=스위치가 켜졌을 때
+'''Choose one or more, when...'''.ko=다음 상황 중 하나 이상 선택
 '''Yes'''.ko=예
 '''No'''.ko=아니요
-'''Send this message (optional, sends standard status message if not specified)'''.ko=이 메시지 전송(선택적, 지정되지 않은 경우 표준 상태 메시지를 보냅니다)
-'''Via a push notification and/or an SMS message'''.ko=푸시 알림 및/또는 문자 메시지를 통해
-'''Set for specific mode(s)'''.ko=특정 모드 설정
+'''Send this message (optional, sends standard status message if not specified)'''.ko=메시지 작성 (작성하지 않을 경우 디폴트 메시지 전송)
+'''Via a push notification and/or an SMS message'''.ko=푸시 알람 및 SMS 설정
+'''Set for specific mode(s)'''.ko=특정 상태 설정
 '''Tap to set'''.ko=눌러서 설정
-'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지작 간 최소 시간(선택 사항, 모든 메시지의 기본 설정)
-'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 거주자는 적절한 국가 코드를 입력했는지 확인하십시오
-'''Water Sensor Wet'''.ko=Water Sensor에서 물이 감지되었습니다
+'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
+'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
+'''Water Sensor Wet'''.ko=누수가 감지되었을 때
 '''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
 '''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
 '''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
 '''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
-'''Assign a name'''.ko=이름 배정
-'''Choose Modes'''.ko=모드 선택
+'''Assign a name'''.ko=이름 설정
+'''Choose Modes'''.ko=상태 선택

smartapps/smartthings/smart-timer.src/smart-timer.groovy

@@ -0,0 +1,62 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  CoolDeep
+ *
+ *  Author: CoolDeep
+ */
+
+definition(
+    name: "Smart Timer",
+    namespace: "smartthings",
+    author: "CoolDeep",
+    description: "If a light/device is already on, leave it on. Else, if a light/device switches on on a trigger, switch off in a given time",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	section("When a sesonsor triggers(turns on)...") {
+		input "mySwitch", "capability.switch", title: "Switches", multiple: true, required: true
+        input "mySensor", "capability.contactSensor", title: "Sensors", multiple: true, required: true
+	}
+    section("Turn it off after how many minutes?") {
+		input "minutesLater", "decimal", title: "When?"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(mySensor, "contact.opened", myHandler)
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribe(mySensor, "contact.open", myHandler)
+}
+    
+def myHandler(evt) {
+	def lightVal = mySwitch.currentSwitch
+    log.debug ">> TheSwitch current value turned ${lightVal}"
+   
+  	if (lightVal.contains("off")) {
+    	def delay = minutesLater * 60
+    	log.debug ">>> Turning off in ${minutesLater} minutes (${delay}seconds)"
+    	runIn(delay, turnOffSwitch)
+    }
+}
+
+def turnOffSwitch() {
+	mySwitch.off()
+}