MSA-1321: Little SmartApp to flash the lights if the multi sensor detects acceleration at the door. Very useful for deaf people like myself to ensure we don't miss the door.

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -18,6 +18,7 @@ metadata {
 	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Sensor"
 		capability "Temperature Measurement"
+		capability "Motion Sensor"
 		capability "Refresh"
 	}
 

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -45,28 +45,17 @@ metadata {
 	}
 
 	preferences {
-		section {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
-		}
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 			}
 		}
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-		}
 
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
@@ -89,8 +78,8 @@ metadata {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
-		main(["status", "acceleration", "temperature"])
+		main(["contact", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 
@@ -98,9 +87,7 @@ def parse(String description) {
 	def results
 
 	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
-		if (garageSensor != "Yes") {
+		results = parseSingleMessage(description)
-			results = parseSingleMessage(description)
-		}
 	}
 	else if (description == 'updated') {
 		//TODO is there a better way to handle this like the other device types?
@@ -216,9 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			if (garageSensor != "Yes") {
+			results.addAll(getContactResult(part, description))
-				results.addAll(getContactResult(part, description))
-			}
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -240,29 +225,6 @@ private List parseContactMessage(String description) {
 	results
 }
 
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
-		}
-		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
-		}
-	}
-	else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
-		}
-		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
-		}
-	}
-}
-
 private List parseOrientationMessage(String description) {
 	def results = []
 	def xyzResults = [x: 0, y: 0, z: 0]
@@ -292,34 +254,7 @@ private List parseOrientationMessage(String description) {
 		}
 	}
 
-	def xyz = getXyzResult(xyzResults, description)
+	results << getXyzResult(xyzResults, description)
-	results << xyz
-
-	if (garageSensor == "Yes") {
-		// Looks for Z-axis orientation as virtual contact state
-		def a = xyz.value.split(',').collect{it.toInteger()}
-		def absValueXY = Math.max(Math.abs(a[0]), Math.abs(a[1]))
-		def absValueZ = Math.abs(a[2])
-		log.debug "absValueXY: $absValueXY, absValueZ: $absValueZ"
-
-		def contactValue = null
-		def garageValue = null
-
-		if (absValueZ > 825 && absValueXY < 175) {
-			contactValue = 'open'
-			garageValue = 'garage-open'
-			log.debug "STATUS: open"
-		}
-		else if (absValueZ < 75 && absValueXY > 825) {
-			contactValue = 'closed'
-			garageValue = 'garage-closed'
-			log.debug "STATUS: closed"
-		}
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
-		results << createEvent(name: "contact", value: contactValue, descriptionText: descriptionText, unit: "", displayed: false)
-		results << createEvent(name: "status", value: garageValue, descriptionText: descriptionText, unit: "")
-	}
 
 	results
 }

smartapps/com-stormwave-doorknock/lights-flash-on-door-knock.src/lights-flash-on-door-knock.groovy

@@ -0,0 +1,170 @@
+/**
+ *  Lights Flash on Door Knock
+ *
+ *  Copyright 2016 Andrew Cornforth
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Lights Flash on Door Knock",
+    namespace: "com.stormwave.doorknock",
+    author: "Andrew Cornforth",
+    description: "Flashes lights when activity is noticed at the door.",
+    category: "Safety & Security",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn@2x.png")
+
+
+preferences {
+	section("Things") 
+    {
+		input "doorsensor", "capability.accelerationSensor", title: "Door Sensor", required: true, multiple: true
+        input "lights", "capability.switch", title:"Lights", required:true, multiple:true
+	}
+    section("Settings")
+    {
+    	input "numFlashes", "number", title:"Number of Flashes", required:true, defaultValue:"5"
+    	input "onFor", "number", title:"Time On (ms)", required:true, defaultValue:"1000"
+    	input "offFor", "number", title:"Time Off (ms)", required:true, defaultValue:"1000"
+	}
+    section("Only If")
+    {
+    	input "switcheson", "capability.switch", title:"Switches Are On", required:false, multiple:true
+    	input "switchesoff", "capability.switch", title:"Switches Are Off", required:false, multiple:true
+    	input "sleepon", "capability.sleepSensor", title:"Thing Is Asleep", required:false, multiple:true
+    	input "sleepoff", "capability.sleepSensor", title:"Thing Is Awake", required:false, multiple:true
+    }
+    section("Or If")
+    {
+    	input "or_switcheson", "capability.switch", title:"Switches Are On", required:false, multiple:true
+    	input "or_switchesoff", "capability.switch", title:"Switches Are Off", required:false, multiple:true
+    	input "or_sleepon", "capability.sleepSensor", title:"Thing Is Asleep", required:false, multiple:true
+    	input "or_sleepoff", "capability.sleepSensor", title:"Thing Is Awake", required:false, multiple:true
+    }
+}
+
+def flashLights()
+{
+    lights.each 
+    { 
+        light ->
+            def delay = 0L
+            if (light.latestValue("switch")=="on")
+            {
+                numFlashes.times 
+                {
+                    light.off(delay: delay)
+                    delay += offFor
+                    light.on(delay: delay)
+                    delay += onFor
+                }
+            }
+	        else
+            {
+                numFlashes.times 
+                {
+                    light.on(delay: delay)
+                    delay += onFor
+                    light.off(delay: delay)
+                    delay += offFor
+                }
+			}
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def unsubcribe()
+{
+	unsubscribe(doorsensor)
+}
+
+def initialize() 
+{
+	subscribe(doorsensor, "acceleration", activityHandler)
+}
+
+def activityHandler(evt) 
+{
+	if (evt.value=="active")
+    {
+    	// Check conditions
+        def valid = true
+        switcheson.each 
+        { 
+            device ->
+            	if (device.latestValue("switch")=="off") { valid = false; }
+        }
+        if (valid)
+            switchesoff.each 
+            { 
+                device ->
+                    if (device.latestValue("switch")=="on") { valid = false; }
+            }
+        if (valid)
+            sleepon.each 
+            { 
+                device ->
+                    if (device.latestValue("sleeping")=="not sleeping") { valid = false; }
+            }
+        if (valid)
+            sleepoff.each 
+            { 
+                device ->
+                    if (device.latestValue("sleeping")=="sleeping") { valid = false; }
+            }
+            
+        // Check for "or" values if failed first step
+		if (!valid)
+        {
+        	valid = true
+            or_switcheson.each 
+            { 
+                device ->
+                    if (device.latestValue("switch")=="off") { valid = false; }
+            }
+            if (valid)
+                or_switchesoff.each 
+                { 
+                    device ->
+                        if (device.latestValue("switch")=="on") { valid = false; }
+                }
+            if (valid)
+                or_sleepon.each 
+                { 
+                    device ->
+                        if (device.latestValue("sleeping")=="not sleeping") { valid = false; }
+                }
+            if (valid)
+                or_sleepoff.each 
+                { 
+                    device ->
+                        if (device.latestValue("sleeping")=="sleeping") { valid = false; }
+                }
+		}
+        if (valid)
+        {
+    		flashLights()
+        }
+	}
+}