Zach Varberg 5429986e81 Set level on sengled bulbs configure ...

This works around the sengled bulbs not following the ZCL spec and using
the value 0xFF as a valid level (the spec says it should be invalid).
It does this by manually setting the level of the bulb to
0xFE (SmartThings 100%) when it is configured, or if it previously had a
level set, manually setting it to that value.  This avoids the issue of
the bulb reporting 0xFF and having the library ignore it because it is
an invalid value.

This resolves: https://smartthings.atlassian.net/browse/ICP-691

2017-04-17 12:36:13 -05:00

..

aeon-home-energy-meter-c3.src

Revert "DVCSMP-1739 Revert "Undo DVCSMP-1739 Revert "make sure reformat the storeGraphData"""

2016-05-23 14:38:40 -07:00

aeon-home-energy-meter.src

Initial commit

2015-08-04 15:49:03 -07:00

aeon-illuminator-module.src

[DVCSMP-2448]

2017-02-28 17:23:13 +05:30

aeon-key-fob.src

[DVCSMP-2443] Standardize Page 4 of DTH UX Improvements

2017-02-28 18:32:02 +05:30

aeon-led-bulb.src

DTH UX Improvements for Page 12 of DTHs:

2017-02-20 18:41:46 +05:30

aeon-minimote.src

DVCSMP-2211 - Update Button Number

2016-11-18 11:28:30 -05:00

aeon-multisensor-6.src

[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements

2017-03-15 09:57:37 -07:00

aeon-multisensor-gen5.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

aeon-multisensor.src

[DVCSMP-2509] Standardize Page 14 of DTH UX Improvements

2017-03-15 05:26:41 +05:30

aeon-outlet.src

DTH UX Improvements for Page 11 of DTHs:

2017-02-20 17:39:27 +05:30

aeon-secure-smart-energy-switch-uk.src

[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements

2017-03-15 09:57:37 -07:00

aeon-siren.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

aeon-smartstrip.src

DTH UX Improvements for Page 12 of DTHs:

2017-02-20 18:41:46 +05:30

arduino-thingshield.src

Initial commit

2015-08-04 15:49:03 -07:00

arrival-sensor-ha.src

arrival-sensor-ha: Read battery level on join

2017-04-12 12:19:36 -07:00

arrival-sensor.src

[DVCSMP-2509] Standardize Page 14 of DTH UX Improvements

2017-03-15 05:26:41 +05:30

bose-soundtouch.src

To Bose Soundtouch DTHs, added Capability "Sensor" & Capability "Actuator" (#1800)

2017-03-27 16:16:57 -07:00

centralite-thermostat.src

DTH UX Improvements for Page 12 of DTHs:

2017-02-20 18:41:46 +05:30

cooper-rf9500.src

DTH UX Improvements for Page 13 of DTHs:

2017-02-21 11:28:27 +05:30

cree-bulb.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

ct100-thermostat.src

[DVCSMP-2513] Standardize Page 18 of DTH UX Improvements

2017-03-15 23:58:43 +05:30

danalock.src

DTH UX Improvements for Page 11 of DTHs:

2017-02-20 17:39:27 +05:30

dimmer-switch.src

[ICP-598] Adding Z-Wave device manufacturer

2017-04-11 17:39:17 -07:00

door-shield.src

Initial commit

2015-08-04 15:49:03 -07:00

ecobee-sensor.src

[DVCSMP-2446]

2017-02-20 18:08:12 +05:30

ecobee-thermostat.src

ICP-448 Thermostat resource works weirdly.

2017-04-03 13:59:47 -07:00

econet-vent.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

everspring-flood-sensor.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

fibaro-dimmer.src

[DVCSMP-2509] Standardize Page 14 of DTH UX Improvements

2017-03-15 05:26:41 +05:30

fibaro-door-window-sensor.src

Added health-check for Fibaro Door Window Sensor

2017-03-27 15:05:39 -07:00

fibaro-flood-sensor.src

Merge pull request #1779 from jackchi/dth_ux_page16

2017-03-16 11:19:59 -07:00

fibaro-motion-sensor.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

fibaro-rgbw-controller.src

[DVCSMP-2442] Standardize Page 3 of DTH UX Improvements

2017-02-28 19:12:34 +05:30

fibaro-smoke-sensor.src

INTL-626 Add mfr fingerprint for Fibaro Smoke Sensor

2016-05-31 14:00:59 -04:00

fidure-thermostat.src

SSVD-2534 Set temperature unit/scale when sending temperature events

2016-08-29 12:40:11 -05:00

fortrezz-water-valve.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

foscam.src

[DVCSMP-2448]

2017-02-28 17:23:13 +05:30

ge-link-bulb.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

gentle-wake-up-controller.src

[DVCSMP-2442] Standardize Page 3 of DTH UX Improvements

2017-02-28 19:12:34 +05:30

harmony-activity.src

[DVCSMP-2447]

2017-02-28 16:22:14 +05:30

home-energy-meter.src

Initial commit

2015-08-04 15:49:03 -07:00

homeseer-multisensor.src

[DVCSMP-2510] Standardize Page 15 of DTH UX Improvements

2017-03-14 14:47:56 -07:00

hue-bloom.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

hue-bridge.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

hue-bulb.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

hue-lux-bulb.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

hue-white-ambiance-bulb.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

life360-user.src

[DVCSMP-2446]

2017-02-20 18:08:12 +05:30

lifx-color-bulb.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

lifx-white-bulb.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

light-sensor.src

Initial commit

2015-08-04 15:49:03 -07:00

logitech-harmony-hub-c2c.src

[CHF-595] Device Health enrollment needs to be in both updated() & installed()

2017-04-11 12:16:05 -07:00

mimolite-garage-door-controller.src

Merge pull request #1723 from pchomal/dth_ux_page3

2017-02-28 08:46:45 -08:00

mobile-presence.src

[DVCSMP-2446]

2017-02-20 18:08:12 +05:30

momentary-button-tile.src

[DVCSMP-2445]

2017-02-17 18:21:16 +05:30

motion-detector.src

[DVCSMP-2443] Standardize Page 4 of DTH UX Improvements

2017-02-28 18:32:02 +05:30

nyce-motion-sensor.src

Merge pull request #1777 from jackchi/dth_ux_page15

2017-03-14 17:36:30 -07:00

nyce-open-closed-sensor.src

[DVCSMP-2513] Standardize Page 18 of DTH UX Improvements

2017-03-15 23:58:43 +05:30

on-off-button-tile.src

[DVCSMP-2444] Standardize Page 5 of DTH UX Improvements

2017-02-28 19:07:03 +05:30

on-off-shield.src

[DVCSMP-2446]

2017-02-20 18:08:12 +05:30

open-closed-sensor.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

particulate-detector.src

Initial commit

2015-08-04 15:49:03 -07:00

pet-feeder-shield.src

Initial commit

2015-08-04 15:49:03 -07:00

plant-link.src

[CHF-561] Fixing Typo Error in Plant Link Readme

2017-03-24 17:23:29 +05:30

rgbw-light.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

secure-dimmer.src

[DVCSMP-2448]

2017-02-28 17:23:13 +05:30

smart-body-analyzer.src

Initial commit

2015-08-04 15:49:03 -07:00

smartalert-siren.src

fixing ocfDeviceType

2017-03-27 21:46:25 -05:00

smartpower-dimming-outlet.src

adding ocfDeviceType

2017-03-27 21:29:33 -05:00

smartpower-outlet-v1.src

Merge pull request #1724 from pchomal/dth_ux_page4

2017-02-28 08:50:37 -08:00

smartpower-outlet.src

adding ocfDeviceType

2017-03-27 21:29:33 -05:00

smartsense-garage-door-multi.src

[DVCSMP-2447]

2017-02-28 16:22:14 +05:30

smartsense-garage-door-sensor-button.src

[DVCSMP-2447]

2017-02-28 16:22:14 +05:30

smartsense-moisture-sensor.src

Merge pull request #1808 from SmartThingsCommunity/staging

2017-03-21 11:48:22 -07:00

smartsense-moisture.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

smartsense-motion-sensor.src

Merge pull request #1808 from SmartThingsCommunity/staging

2017-03-21 11:48:22 -07:00

smartsense-motion.src

[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements

2017-03-15 09:57:37 -07:00

smartsense-multi-sensor.src

DVCSMP-2504: Add fingerprints for Centrailte generic multi, motion, water leak

2017-03-20 07:39:37 -07:00

smartsense-multi.src

DVCSMP-2533 Fix backgroundColor on SmartSense Multi

2017-03-22 11:21:04 -05:00

smartsense-open-closed-sensor.src

Properly handle tempOffset in smartsense sensors

2017-03-16 09:30:52 -05:00

smartsense-temp-humidity-sensor.src

Support config on both temp-humidty firmwares

2017-03-30 15:44:40 -05:00

smartsense-virtual-open-closed.src

DTH UX Improvements for Page 13 of DTHs:

2017-02-21 11:28:27 +05:30

smartweather-station-tile.src

added "Sensor" capability

2015-08-24 11:51:47 -06:00

spark.src

[DVCSMP-2444] Standardize Page 5 of DTH UX Improvements

2017-02-28 19:07:03 +05:30

sylvania-ultra-iq.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

temperature-sensor.src

Initial commit

2015-08-04 15:49:03 -07:00

testing

Merge pull request #1725 from pchomal/dth_ux_page5

2017-02-28 08:50:54 -08:00

thing.src

Initial commit

2015-08-04 15:49:03 -07:00

tile-ux

Merge pull request #1723 from pchomal/dth_ux_page3

2017-02-28 08:46:45 -08:00

tyco-door-window-sensor.src

To Tyco Door-Window Sensor DTH, added Capability "Sensor" per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html?highlight=sensor%20actuator#actuator-and-sensor.

2017-03-27 01:08:16 -07:00

unknown.src

[DVCSMP-2445]

2017-02-17 18:21:16 +05:30

wattvision.src

To Wattvision power metering Sensor DTH, added Capability "Sensor" per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html?highlight=sensor%20actuator#actuator-and-sensor.

2017-04-03 00:21:11 -07:00

wemo-bulb.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

wemo-light-switch.src

ICP-381 - Add ocfDeviceType to switch devices (#1856)

2017-03-31 11:05:26 -07:00

wemo-motion.src

[DVCSMP-2447]

2017-02-28 16:22:14 +05:30

wemo-switch.src

ICP-381 - Add ocfDeviceType to switch devices (#1856)

2017-03-31 11:05:26 -07:00

wireless-scale.src

Initial commit

2015-08-04 15:49:03 -07:00

zigbee-button.src

[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements

2017-03-15 09:57:37 -07:00

zigbee-dimmer-power.src

Set level on sengled bulbs configure

2017-04-17 12:36:13 -05:00

zigbee-dimmer.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zigbee-lock.src

Added health-check for Zigbee Lock

2017-03-30 17:22:43 -07:00

zigbee-rgb-bulb.src

Merge pull request #1732 from SmartThingsCommunity/staging

2017-03-01 07:56:42 -08:00

zigbee-rgbw-bulb.src

Merge pull request #1732 from SmartThingsCommunity/staging

2017-03-01 07:56:42 -08:00

zigbee-switch-power.src

adding ocfDeviceType

2017-03-27 21:29:33 -05:00

zigbee-switch.src

Merge pull request #1844 from SmartThingsCommunity/staging

2017-03-28 14:14:54 -07:00

zigbee-valve.src

[DVCSMP-2445]

2017-02-17 18:21:16 +05:30

zigbee-white-color-temperature-bulb.src

ICP-375 Dimming level reporting with osram and wemo f/w bug

2017-02-28 14:29:02 -08:00

zll-dimmer-bulb.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

zll-rgb-bulb.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zll-rgbw-bulb.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zll-white-color-temperature-bulb-5000k.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zll-white-color-temperature-bulb.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zooz-power-strip-outlet.src

DVCSMP-2399 Added Zooz ZEN20 DTH

2017-03-22 20:00:54 -07:00

zooz-power-strip.src

Check for null device and send refresh() from configure()

2017-04-03 15:39:48 -07:00

zwave-controller.src

Initial commit

2015-08-04 15:49:03 -07:00

zwave-device-multichannel.src

[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements

2017-03-15 09:57:37 -07:00

zwave-device.src

[DVCSMP-2510] Standardize Page 15 of DTH UX Improvements

2017-03-14 14:47:56 -07:00

zwave-dimmer-switch-generic.src

ICP-554 - ocfDeviceType: "oic.d.light"

2017-04-11 14:17:31 -04:00

zwave-door-window-sensor.src

[ICP-598] Adding Enerwave Door/Window Sensor

2017-04-11 21:49:51 -07:00

zwave-garage-door-opener.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-lock.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-metering-dimmer.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-metering-switch.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-motion-sensor.src

Merge pull request #1893 from SmartThingsCommunity/production

2017-04-11 13:34:30 -07:00

zwave-plus-door-window-sensor.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

zwave-plus-motion-temp-sensor.src

Z-Wave Plus Secure Sensors: reduce configure() delay for join v2

2016-06-22 11:12:10 -04:00

zwave-relay.src

DTH UX Improvements for Page 12 of DTHs:

2017-02-20 18:41:46 +05:30

zwave-remote.src

Initial commit

2015-08-04 15:49:03 -07:00

zwave-sensor.src

[DVCSMP-2510] Standardize Page 15 of DTH UX Improvements

2017-03-14 14:47:56 -07:00

zwave-siren.src

Revert "Added health-check for FortrezZ Siren Strobe Alarm"

2017-04-06 14:15:08 -07:00

zwave-smoke-alarm.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-switch-generic.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-switch-secure.src

ICP-381 - Add ocfDeviceType to switch devices (#1856)

2017-03-31 11:05:26 -07:00

zwave-switch.src

[ICP-598] Adding Z-Wave device manufacturer

2017-04-11 17:39:17 -07:00

zwave-thermostat.src

Added checkInterval sendEvent in installed() section for all zwave DTHs

2017-04-11 09:37:09 +05:30

zwave-virtual-momentary-contact-switch.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

zwave-water-sensor.src

ICP-554 - OCF device types Public Repo

2017-04-05 20:34:14 -04:00

zwave-water-valve.src

[DVCSMP-2445]

2017-02-17 18:21:16 +05:30