9a760b778c
MSA-1875: Originally developed by Don Caruanna with minor changes from Sensative.
...
This is intended to be the official/default device handler for Strips by Sensative.
The preference defaults are set to the device defaults.
(If you are looking for accurate values in the IDE, you have to hit "Done" in preferences once, even if you don't change any settings.)
Preferences with an asterisk have to wait for the next wakeup, automatic or manual. The pending icon will display if there are changes pending and say "Synced" otherwise. If you revert your preferences to values that match the device before the next wakeup, it will go back to "Synced". Only changed preferences are pushed to the device.
The actual wakeup by the device is approximately 90% of the wakeupinterval setting. So the observed wakeup interval will be a little less than the chosen one. Also, the wakeupinterval has a minimum of 1800 and a maximum of 86400.
A tamper notification is sent in 2 cases:
Putting a magnet on the round edge when there is a magnet on the square one triggers tamper
During a Manual Wake Up, a tamper is sent before the Node Info.
The tamper event time can be cleared by just tapping on the time itself. Tamper events are reported so they can be seen historically in the GUI.
2017-04-07 02:01:23 -07:00
63d8e6444b
Merge pull request #1881 from bflorian/SAPLAT-41-composite-refrigerator-example
...
SAPLAT-41 added simulated refrigerator composite device type example
2017-04-05 11:55:20 -07:00
24f63a514a
SAPLAT-41 added simulated refrigerator composite device type example
2017-04-05 11:40:46 -07:00
2bc44e0205
Merge pull request #1877 from SmartThingsCommunity/staging
...
Rolling down staging to master
2017-04-04 14:41:02 -07:00
24d079db7c
Merge pull request #1876 from SmartThingsCommunity/revert-1870-revert-phase2
...
Revert "[CHF-571] [CHF-568] Revert untested Health Check on Keen Home EcoNet"
2017-04-04 14:39:37 -07:00
283ed425d8
Merge pull request #1875 from SmartThingsCommunity/revert-1872-revert-harmony
...
CHF-574 Revert "Revert "Added health-check for Logitech Harmony Hub""
2017-04-04 14:39:10 -07:00
1545707ae3
Revert "[CHF-571] [CHF-568] Revert untested Health Check on Keen Home EcoNet"
2017-04-04 14:38:54 -07:00
2fd8cf1416
Revert "Revert "Added health-check for Logitech Harmony Hub""
2017-04-04 14:38:11 -07:00
a397fe9fc3
Merge pull request #1873 from SmartThingsCommunity/production
...
Rolling down production to staging
2017-04-04 13:49:04 -07:00
f83500fbf8
Merge pull request #1872 from SmartThingsCommunity/revert-harmony
...
Revert "Added health-check for Logitech Harmony Hub"
2017-04-04 10:27:20 -07:00
a297e79b0e
Revert "Added health-check for Logitech Harmony Hub"
...
This reverts commit cbd15ae9cc
2017-04-04 10:23:04 -07:00
69d52093dc
Merge pull request #1852 from marstorp/zwaveThermostat-ICP493-fixInvalidValues
...
ICP-493 Thermostat Capabilities Payload Issues
2017-04-03 19:52:00 -07:00
fda743a801
Merge pull request #1870 from jackchi/revert-phase2
...
[CHF-571] [CHF-568] Revert untested Health Check on Keen Home EcoNet
2017-04-03 16:51:45 -07:00
f7a5ea4820
Merge pull request #1868 from bflorian/DVCSMP-2399-zooz-zen20-staging
...
DVCSMP Check for null device and send refresh() from configure()
2017-04-03 16:48:44 -07:00
d51ec9e518
[CHF-571] [CHF-568] Revert untested Health Check on Keen Home & EcoNet Vents
2017-04-03 16:47:15 -07:00
fe4a5239c7
Merge pull request #1869 from SmartThingsCommunity/staging
...
Rolling down staging to master
2017-04-03 15:59:49 -07:00
ae41b4adbe
Merge pull request #1867 from workingmonk/bug/name_fix
...
DVCSMP-2523 Removing generation name from model name
2017-04-03 15:42:27 -07:00
bdcaf175f0
Check for null device and send refresh() from configure()
2017-04-03 15:39:48 -07:00
ba10869dd5
removing generation name from model name
2017-04-03 15:00:41 -07:00
6f411e1a3e
Merge pull request #1866 from marstorp/ecobee3-EmergencyHeatFix
...
ICP-448 Thermostat resource works weirdly.
2017-04-03 14:07:49 -07:00
4cc41d9d9b
ICP-448 Thermostat resource works weirdly.
...
Fixing change of auxHeatOnly to emergency heat.
Also adding main tile icon so Things view doesn’t show a grey blob
2017-04-03 13:59:47 -07:00
66875170f4
Merge pull request #1850 from parijatdas/everspring
...
[CHF-559] Health Check everspring-flood-sensor
2017-04-03 09:49:49 -07:00
9e80a188df
Merge pull request #1851 from parijatdas/fibaro_door_window_sensor_zw5
...
[CHF-582] Health Check fibaro-door-window-sensor-zw5
2017-04-03 09:48:43 -07:00
ec781b18be
Merge pull request #1865 from CosmicPuppy/ActionTiles-Wattvision-CapabilitySensor-Patch
...
To Wattvision power metering Sensor DTH, added Capability "Sensor"
2017-04-03 03:08:10 -07:00
43bedd41a8
To Wattvision power metering Sensor DTH, added Capability "Sensor" per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html?highlight=sensor%20actuator#actuator-and-sensor .
2017-04-03 00:21:11 -07:00
f75e8a6b2d
Merge pull request #1853 from parijatdas/zigbee_lock
...
[CHF-557] Health Check ZigBee Lock
2017-04-02 09:50:44 -07:00
ce10bcf2cd
Merge pull request #1862 from juano2310/CP-381
...
HOTFIX - ICP-381
2017-03-31 13:55:41 -07:00
0c8de4402b
HOTFIX - ICP-381
...
CP-381 - OCF device type
Remove space
DVCSMP-2523
Revert DVCSMP-2523
spaces
2017-03-31 16:53:04 -04:00
a112d4b00e
ICP-381 - Add ocfDeviceType to switch devices ( #1856 )
2017-03-31 11:05:26 -07:00
515fab9fa4
Added health-check for Zigbee Lock
2017-03-30 17:22:43 -07:00
100e696d02
Merge pull request #1857 from varzac/fix-humidity-configuration
...
Support config on both temp-humidty firmwares
2017-03-30 16:58:12 -07:00
3e988ce657
Merge pull request #1860 from SmartThingsCommunity/staging
...
Rolling down staging to master
2017-03-30 15:50:32 -07:00
fe887121d3
[CHF-568] Remove Keen Smart Home Vent fingerprint ( #1859 )
2017-03-30 15:49:28 -07:00
7375abf9c0
Merge pull request #1848 from jackchi/staging
...
[DVCSMP-2451] Fix Fibaro-flood-sensor-zw5 dry/wet state
2017-03-30 15:12:45 -07:00
00224c2d0b
Support config on both temp-humidty firmwares
...
This solves an issue with invalid configuration of the reporting for
humidity on the smartsense-temp-humidity-sensor. This issue was masked
by the fact that the device has a default configuration for reporting
humidity, but the configuration has never been valid as it used an
incorrect dataType for the configuration.
This resolves: https://smartthings.atlassian.net/browse/DPROT-263
This resolves: https://smartthings.atlassian.net/browse/EBF-1205
This resolves: https://smartthings.atlassian.net/browse/DVCSMP-2420
2017-03-30 15:44:40 -05:00
e985f38cf4
ICP-493 Thermostat Capabilities Payload Issues
...
thermostatFanMode reports "fanAuto", but "fanAuto" is not listed in the supported modes
Changing capability attributes to follow specified values.
Also adding icons/removing configure tile to realigning with other thermostats,
adding poll of device data in configure() to allow for faster initialization of device data.
2017-03-29 17:45:01 -07:00
a79e0f70fd
Merge pull request #1846 from marstorp/ecobee3-ICP429-fixnotSetUnknownValues
...
ICP-448 Thermostat resource works weirdly.
2017-03-29 14:44:42 -07:00
f05daf2f34
Merge pull request #1538 from pchomal/zwave_metering_dimmer
...
[CHF-482] Health Check implementation for Z-Wave Metering Dimmer
2017-03-29 14:42:39 -07:00
f26b9ce6b2
Added health-check for Fibaro Door Window Sensor ZW5
2017-03-29 14:41:43 -07:00
ac4c353287
Added health-check for Everspring Flood Sensor
2017-03-29 10:43:02 -07:00
ed40ca7017
[DVCSMP-2451] Fix Fibaro-flood-sensor-zw5 dry/wet state
2017-03-28 23:34:38 -07:00
7aa8be4322
ICP-448 Thermostat resource works weirdly.
...
Mapping between ST and SC fails at times due to improper implementation of capability attributes.
Some violates the attribute types, others are not initialized to a valid value, most due to not having one.
However, mapping requires right type and values.
This PR fixes Ecobee thermostats attributes.
2017-03-28 16:14:49 -07:00
23a0b26cb9
Merge pull request #1845 from SmartThingsCommunity/master
...
Rolling up master to staging
2017-03-28 14:15:25 -07:00
00fc9e1ab3
Merge pull request #1844 from SmartThingsCommunity/staging
...
Rolling down staging to master
2017-03-28 14:14:54 -07:00
3b2d955c55
Merge pull request #1843 from SmartThingsCommunity/revert-1818-spruce_controller
...
Revert "[CHF-577] Added Health Check Implementation for Spruce Controller."
2017-03-28 14:14:11 -07:00
44facec5df
Revert "[CHF-577] Added Health Check Implementation for Spruce Controller."
2017-03-28 14:13:37 -07:00
9f944df598
Merge pull request #1842 from SmartThingsCommunity/staging
...
Rolling up staging to production
2017-03-28 13:48:28 -07:00
e3c1442278
MSA-1813 Spruce merge ( #1841 )
...
* Hand merge changes from 379e70b343https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/1737
* Spruce Scheduler from https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/1737
2017-03-28 11:31:04 -07:00
59bfdc9b06
Merge pull request #1835 from parijatdas/fibaro_door_window_sensor
...
[CHF-563] Health Check fibaro-door-window-sensor
2017-03-28 10:47:55 -07:00
e274f2d3fe
Merge pull request #1839 from pchomal/smartsense_moisture_hc
...
[CHF-560] Health Check Smartsense Moisture
2017-03-28 10:46:53 -07:00
Fredrik Westman