Merge pull request #1874 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/README.md

@@ -0,0 +1,41 @@
+# Fibaro Door Window Sensor ZW5
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor ZW5](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Tamper Alert** - detects tampers
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor ZW5 is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor ZW5 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
+		capability "Health Check"
 
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
 	}
@@ -199,7 +200,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
     def cmds = []
     
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -22,28 +22,29 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-        
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+		fingerprint mfr:"010F", prod:"0B01", model:"2002"
+		fingerprint mfr:"010F", prod:"0B01", model:"1002"
 	}
 
 	simulator {
-    
 	}
-    
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}       
-        }
-        
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
+				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
+			}
+			
+			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
+			}
+		}
+		
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -55,22 +56,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-       	        
-        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        	state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "FGFS"
-        details(["FGFS","battery", "temperature"])
-    }
+
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main "FGFS"
+		details(["FGFS","battery", "temperature"])
+	}
 }
 
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-    
-    if (description.startsWith("Err 106")) {
+
+	if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -85,13 +86,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
 
-        if (cmd) {
-            log.debug "Parsed '${cmd}'"
-            zwaveEvent(cmd)
-        }
-    }
+		if (cmd) {
+			log.debug "Parsed '${cmd}'"
+			zwaveEvent(cmd)
+		}
+	}
 }
 
 //security
@@ -108,7 +109,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -122,105 +123,124 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
+	def cmds = []
+	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	// cmds << "delay 500"
+	cmds << encap(zwave.batteryV1.batteryGet())
+	[event, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+	log.debug "deviceIdType:                ${cmd.deviceIdType}"
+
+	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
 		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
+
+		cmd.deviceIdData.each{ data ->
+			serialNumber += "${String.format("%02X", data)}"
+		}
+
+		updateDataValue("serialNumber", serialNumber)
+		log.debug "${device.displayName} - serial number: ${serialNumber}"
+	}
+
+	def response_cmds = []
+	if (!device.currentState("temperature")) {
+		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	}
+	if (!getDataValue("version") && !zwaveInfo.ver) {
+		log.debug "Requesting Version Report"
+		response_cmds << "delay 500"
+		response_cmds << encap(zwave.versionV1.versionGet())
+	}
+	response_cmds << "delay 1000"
+	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
+	[[:], response(response_cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+	log.debug "applicationVersion:      ${cmd.applicationVersion}"
+	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
+
+	result << createEvent(map)
+
+	if (!getDataValue("serialNumber")) {
+		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
+	} else {
+		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
+	}
+	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-    if (cmd.notificationType == 5) {
-    	switch (cmd.event) {                
-        	case 2:
-            	map.name = "water"
-                map.value = "wet"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-                
-            case 0:
-            	map.name = "water"
-                map.value = "dry"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-        }
-    } else if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	map.name = "tamper"
-                map.value = "inactive"
-                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+	if (cmd.notificationType == 5) {
+		switch (cmd.event) {
+			case 2:
+				map.name = "water"
+				map.value = "wet"
+				map.descriptionText = "${device.displayName} is ${map.value}"
 				break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-        }
-    }
-    
-    createEvent(map)
+
+			case 0:
+				map.name = "water"
+				map.value = "dry"
+				map.descriptionText = "${device.displayName} is ${map.value}"
+				break
+		}
+	} else if (cmd.notificationType == 7) {
+		switch (cmd.event) {
+			case 0:
+				map.name = "tamper"
+				map.value = "inactive"
+				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+
+			case 3:
+				map.name = "tamper"
+				map.value = "active"
+				map.descriptionText = "${device.displayName}: tamper alarm activated"
+				break
+		}
+	}
+
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-        // temperature
-        def cmdScale = cmd.scale == 1 ? "F" : "C"
-        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-        map.unit = getTemperatureScale()
-        map.name = "temperature"
-        map.displayed = true
+		// temperature
+		def cmdScale = cmd.scale == 1 ? "F" : "C"
+		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+		map.unit = getTemperatureScale()
+		map.name = "temperature"
+		map.displayed = true
 	}
-	
-    createEvent(map)
+
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -229,21 +249,18 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-    def cmds = []
-    
-	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+	// default initial state
+	sendEvent(name: "water", value: "dry")
 
-	encapSequence(cmds, 500)
+	def cmds = []
+
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
+
+	encapSequence(cmds, 200)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -252,7 +269,7 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
+	"5601${cmd.format()}0000"
 }
 
 private encapSequence(commands, delay=200) {
@@ -260,13 +277,10 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
-	//todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}
+	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
+		// Secure inclusion failed
+		crc16(cmd)
+	} else {
+		secure(cmd)
+	}
+}

devicetypes/keen-home/keen-home-smart-vent.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/keen-home/keen-home-smart-vent.src/README.md

@@ -0,0 +1,39 @@
+# Keen Home Smart Vent
+
+Cloud Execution
+
+Works with: 
+
+* [Keen Home Smart Vent](https://www.smartthings.com/works-with-smartthings/keen-home/keen-home-smart-vent)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Sensor** - detects sensor events
+* **Temperature Measurement** - represents capability to measure temperature
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Keen Home Smart Vent with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Keen Home Smart Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205302050-Keen-Home-Smart-Vent)

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,6 +11,7 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
+        // capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -20,10 +21,7 @@ metadata {
         command "setZigBeeIdTile"
         command "clearObstruction"
 
-        fingerprint endpoint: "1",
-        profileId: "0104",
-        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
-        outClusters: "0019"
+        fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019"
     }
 
     // simulator metadata
@@ -40,10 +38,10 @@ metadata {
     // UI tile definitions
     tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#00a0dc"
             state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#e86d13"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
         }
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
             state "level", action:"switch level.setLevel"
@@ -466,15 +464,27 @@ def refresh() {
     getBattery()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def configure() {
     log.debug "CONFIGURE"
 
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    // sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()
 
     def configCmds = [
         // bind reporting clusters to hub
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
+            //commenting out switch cluster bind as using wrapper onOffConfig of zigbee class
+        //"zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
@@ -510,5 +520,5 @@ def configure() {
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
     ]
 
-    return configCmds + refresh()
+    return configCmds + zigbee.onOffConfig() + refresh()
 }

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -1,6 +1,5 @@
 /**
- *  Spruce Controller - Pre Release V2 10/11/2015
- *
+ *  Spruce Controller V2_4 Big Tiles *
  *  Copyright 2015 Plaid Systems
  *
  *	Author: NC
@@ -21,82 +20,96 @@
  */
 
 metadata {
-	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
-		capability "Switch"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Actuator"
-        capability "Valve"        
+	definition (name: 'Spruce Controller', namespace: 'plaidsystems', author: 'Plaid Systems') {
+		capability 'Switch'
+        capability 'Configuration'
+        capability 'Refresh'
+        capability 'Actuator'
+        capability 'Valve'        
 		
-        attribute "switch", "string"
-        attribute "switch1", "string"
-		attribute "switch2", "string"
-		attribute "switch8", "string"
-		attribute "switch5", "string"
-		attribute "switch3", "string"
-		attribute "switch4", "string"
-		attribute "switch6", "string"
-		attribute "switch7", "string"
-        attribute "switch9", "string"
-		attribute "switch10", "string"
-		attribute "switch11", "string"
-		attribute "switch12", "string"
-		attribute "switch13", "string"
-		attribute "switch14", "string"
-		attribute "switch15", "string"
-        attribute "switch16", "string"
-		attribute "status", "string"        
+        attribute 'switch', 'string'
+        attribute 'switch1', 'string'
+		attribute 'switch2', 'string'
+		attribute 'switch8', 'string'
+		attribute 'switch5', 'string'
+		attribute 'switch3', 'string'
+		attribute 'switch4', 'string'
+		attribute 'switch6', 'string'
+		attribute 'switch7', 'string'
+        attribute 'switch9', 'string'
+		attribute 'switch10', 'string'
+		attribute 'switch11', 'string'
+		attribute 'switch12', 'string'
+		attribute 'switch13', 'string'
+		attribute 'switch14', 'string'
+		attribute 'switch15', 'string'
+        attribute 'switch16', 'string'
+		attribute 'rainsensor', 'string'
+        attribute 'status', 'string'
+        attribute 'tileMessage', 'string'
+        attribute 'minutes', 'string'
+        attribute 'VALUE_UP', 'string'
+        attribute 'VALUE_DOWN', 'string'        
         
-        command "programOn"
-        command "programOff"
-        command "on"
-        command "off"
-        command "z1on"
-		command "z1off"
-		command "z2on"
-		command "z2off"        
-		command "z3on"
-		command "z3off"
-		command "z4on"
-		command "z4off"
-		command "z5on"
-		command "z5off"
-		command "z6on"
-		command "z6off"
-		command "z7on"
-		command "z7off"
-		command "z8on"
-		command "z8off"
-        command "z9on"
-        command "z9off"
-		command "z10on"
-		command "z10off"
-		command "z11on"
-		command "z11off"
-		command "z12on"
-		command "z12off"
-		command "z13on"
-		command "z13off"
-		command "z14on"
-		command "z14off"
-		command "z15on"
-		command "z15off"
-		command "z16on"
-		command "z16off"
-        command "offtime"
+        command 'levelUp'
+        command 'levelDown'
+        command 'programOn'
+        command 'programOff'
+        command 'programWait'
+        command 'programEnd'
         
-        command "refresh"        
-        command "rain"
-        command "manual"
-        command "setDisplay"
+        command 'on'
+        command 'off'
+        command 'zon'
+        command 'zoff'
+        command 'z1on'
+		command 'z1off'
+		command 'z2on'
+		command 'z2off'        
+		command 'z3on'
+		command 'z3off'
+		command 'z4on'
+		command 'z4off'
+		command 'z5on'
+		command 'z5off'
+		command 'z6on'
+		command 'z6off'
+		command 'z7on'
+		command 'z7off'
+		command 'z8on'
+		command 'z8off'
+        command 'z9on'
+        command 'z9off'
+		command 'z10on'
+		command 'z10off'
+		command 'z11on'
+		command 'z11off'
+		command 'z12on'
+		command 'z12off'
+		command 'z13on'
+		command 'z13off'
+		command 'z14on'
+		command 'z14off'
+		command 'z15on'
+		command 'z15off'
+		command 'z16on'
+		command 'z16off'
         
-        command "settingsMap"
-        command "writeTime"
-        command "writeType"        
-        command "notify"
-        command "updated"
-
-		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
+        command 'config'
+        command 'refresh'        
+        command 'rain'
+        command 'manual'
+        command 'manualTime'
+        command 'settingsMap'
+        command 'writeTime'
+        command 'writeType'        
+        command 'notify'
+        command 'updated'      
+        
+		//ST release
+		//fingerprint endpointId: '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18', profileId: '0104', deviceId: '0002', deviceVersion: '00', inClusters: '0000,0003,0004,0005,0006,000F', outClusters: '0003, 0019', manufacturer: 'PLAID SYSTEMS', model: 'PS-SPRZ16-01'
+		//new release
+        fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,0009,000A,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
 		
 	}
 
@@ -104,162 +117,230 @@ metadata {
 	simulator {
 		// status messages
 		
-		// reply messages
-		
+		// reply messages		
 	}
+    
     preferences {
-    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
-    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
-    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
-	}
+    input description: 'If you have a rain sensor wired to the rain sensor input on the Spruce controller, turn it on here.', displayDuringSetup: true, type: 'paragraph', element: 'paragraph', title: 'Rain Sensor'
+    input description: 'The SYNC SETTINGS button must be pressed after making a change to the Rain sensor:', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''     
+    input 'RainEnable', 'bool', title: 'Rain Sensor Attached?', required: false, displayDuringSetup: true
+    input description: 'Adjust manual water time with arrows on main tile.  The time indicated in the first small tile indicates the time the zone will water when manually switched on.', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''
+    }
 
 	// UI tile definitions
 	tiles {
     
-    	standardTile("status", "device.status") {            
-            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
-            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
-            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
-            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
-            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
-            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#00A0DC"
-            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
-            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
-            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
-            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#cccccc"
-            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
-            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
+    	multiAttributeTile(name:"switchall", type:"generic", width:6, height:4) {        
+            tileAttribute('device.status', key: 'PRIMARY_CONTROL') {
+            attributeState 'schedule', label: 'Ready', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top.png'
+            attributeState 'finished', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#46c2e8'
+            attributeState 'raintoday', label: 'Rain Today', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'rainy', label: 'Rain', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'raintom', label: 'Rain Tomorrow', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'donewweek', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#00A0DC'
+            attributeState 'skipping', label: 'Skip', icon: 'st.Outdoor.outdoor20', backgroundColor: '#46c2e8'
+            attributeState 'moisture', label: 'Ready', icon: 'st.Weather.weather2', backgroundColor: '#46c2e8'
+            attributeState 'pause', label: 'PAUSE', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+			attributeState 'delayed', label: 'Delayed', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+            attributeState 'active', label: 'Active', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+            attributeState 'season', label: 'Adjust', icon: 'st.Outdoor.outdoor17', backgroundColor: '#ffb900'
+            attributeState 'disable', label: 'Off', icon: 'st.secondary.off', backgroundColor: '#cccccc'
+            attributeState 'warning', label: 'Warning', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top_yellow.png'
+            attributeState 'alarm', label: 'Alarm', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_s_red.png', backgroundColor: '#e66565'
+            }
+            
+            tileAttribute("device.minutes", key: "VALUE_CONTROL") {
+                attributeState "VALUE_UP", action: "levelUp"
+                attributeState "VALUE_DOWN", action: "levelDown"
+            }
+            
+            tileAttribute("device.tileMessage", key: "SECONDARY_CONTROL") {
+                attributeState "tileMessage", label: '${currentValue}'     
+            }            
+            
         }
-		standardTile("switch", "device.switch") {			
-			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
-            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-		}
-        standardTile("rainsensor", "device.rainsensor") {			
-			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
-            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
-		}    	
-        standardTile("switch1", "device.switch1") {			
-			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch2", "device.switch2") {            
-            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        valueTile('minutes', 'device.minutes'){
+        	state 'minutes', label: '${currentValue} min'
+        }
+        valueTile('dummy', 'device.minutes'){
+        	state 'minutes', label: ''
+        }
+		standardTile('switch', 'device.switch', width:2, height:2) {
+            state 'off', label: 'Start', action: 'programOn', icon: 'st.Outdoor.outdoor12', backgroundColor: '#a9a9a9'
+            state 'programOn', label: 'Wait', action: 'programOff', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'programWait', label: 'Wait', action: 'programEnd', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'on', label: 'Running', action: 'programEnd', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
 		}        
-        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
-			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile("rainsensor", "device.rainsensor", decoration: 'flat') {			
+			state "rainSensoroff", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
+            state "rainSensoron", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on_blue_small.png'
+            state "disable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_x_small.png'
+            state "enable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
 		}
-        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
-            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch1', 'device.switch1', inactiveLabel: false) {			
+			state 'z1off', label: '1', action: 'z1on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z1on', label: '1', action: 'z1off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
-            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
-            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
-            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
-            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
-			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
-            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch2', 'device.switch2', inactiveLabel: false) {            
+            state 'z2off', label: '2', action: 'z2on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z2on', label: '2', action: 'z2off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}        
-        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
-			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch3', 'device.switch3', inactiveLabel: false) {			
+			state 'z3off', label: '3', action: 'z3on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z3on', label: '3', action: 'z3off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
-            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch4', 'device.switch4', inactiveLabel: false) {            
+            state 'z4off', label: '4', action: 'z4on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z4on', label: '4', action: 'z4off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
-            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch5', 'device.switch5', inactiveLabel: false) {            
+            state 'z5off', label: '5', action: 'z5on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z5on', label: '5', action: 'z5off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
-            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+		standardTile('switch6', 'device.switch6', inactiveLabel: false) {            
+            state 'z6off', label: '6', action: 'z6on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z6on', label: '6', action: 'z6off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
-            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch7', 'device.switch7', inactiveLabel: false) {            
+            state 'z7off', label: '7', action: 'z7on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z7on', label: '7', action: 'z7off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch8', 'device.switch8', inactiveLabel: false) {            
+            state 'z8off', label: '8', action: 'z8on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z8on', label: '8', action: 'z8off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch9', 'device.switch9', inactiveLabel: false) {			
+			state 'z9off', label: '9', action: 'z9on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z9on', label: '9', action: 'z9off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch10', 'device.switch10', inactiveLabel: false) {            
+            state 'z10off', label: '10', action: 'z10on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z10on', label: '10', action: 'z10off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}        
+        standardTile('switch11', 'device.switch11', inactiveLabel: false) {			
+			state 'z11off', label: '11', action: 'z11on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z11on', label: '11', action: 'z11off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch12', 'device.switch12', inactiveLabel: false) {            
+            state 'z12off', label: '12', action: 'z12on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z12on', label: '12', action: 'z12off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch13', 'device.switch13', inactiveLabel: false) {            
+            state 'z13off', label: '13', action: 'z13on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z13on', label: '13', action: 'z13off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch14', 'device.switch14', inactiveLabel: false) {            
+            state 'z14off', label: '14', action: 'z14on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z14on', label: '14', action: 'z14off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch15', 'device.switch15', inactiveLabel: false) {            
+            state 'z15off', label: '15', action: 'z15on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z15on', label: '15', action: 'z15off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}		
-        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
-            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch16', 'device.switch16', inactiveLabel: false) {            
+            state 'z16off',  label: '16', action: 'z16on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z16on',  label: '16', action: 'z16off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}        
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", action: "refresh", icon:"st.secondary.refresh"            
+        standardTile('refresh', 'device.switch', inactiveLabel: false, decoration: 'flat') {
+			state 'default', action: 'refresh', icon:'st.secondary.refresh'//-icon'            
 		}
-        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}		
+        standardTile('configure', 'device.configure', inactiveLabel: false, decoration: 'flat') {
+			state 'configure', label:'', action:'configuration.configure', icon:'http://www.plaidsystems.com/smartthings/st_syncsettings.png'//sync_icon_small.png'
+		}        
 		
-        main (["status"])        
-        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
-    }    
+        main (['switchall'])        
+        details(['switchall','minutes','rainsensor','switch1','switch2','switch3','switch4','switch','switch5','switch6','switch7','switch8','switch9','switch10','switch11','switch12','refresh','configure','switch13','switch14','switch15','switch16'])		
+    }       
 }
 
+//used for schedule 
 def programOn(){
-    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Program turned on')    
+    }
+
+def programWait(){    
+    sendEvent(name: 'switch', value: 'programWait', descriptionText: "Initializing Schedule")
+    }
+
+def programEnd(){
+	//sets switch to off and tells schedule switch is off/schedule complete with manaual
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program manually turned off')
+    zoff() 
     }
     
 def programOff(){    
-    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program turned off')
     off()
     }
-    
-def updated(){
-	log.debug "updated"    
+
+//set minutes
+def levelUp(){
+	def newvalue = 1
+    if (device.latestValue('minutes') != null) newvalue = device.latestValue('minutes').toInteger()+1
+    if (newvalue >= 60) newvalue = 60
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)    
+}
+
+def levelDown(){
+	def newvalue = device.latestValue('minutes').toInteger()-1
+    if (newvalue <= 0) newvalue = 1
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {	
-	//log.debug "Parse description $description"
+	log.debug "Parse description ${description}"
     def result = null
     def map = [:]
-	if (description?.startsWith("read attr -")) {
+	if (description?.startsWith('read attr -')) {
 		def descMap = parseDescriptionAsMap(description)
 		//log.debug "Desc Map: $descMap"
         //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
-		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
-			log.debug "Zone"
+		if (descMap.cluster == '000F' && descMap.attrId == '0055') {
+			log.debug 'Zone'
             map = getZone(descMap)            
 		}
-        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
-			log.debug "Alarm"            
+        else if (descMap.cluster == '0009' && descMap.attrId == '0000') {
+			log.debug 'Alarm'
             map = getAlarm(descMap)
             }
-	}     
-	
-	if (map) {
-		result = createEvent(map)
 	}
-	log.debug "Parse returned $map $result"
+    else if (description?.startsWith('catchall: 0104 0009')){
+    	log.debug 'Sync settings to controller complete'
+        if (device.latestValue('status') != 'alarm'){
+        	def configEvt = createEvent(name: 'status', value: 'schedule', descriptionText: "Sync settings to controller complete")
+            def configMsg = createEvent(name: 'tileMessage', value: 'Sync settings to controller complete', descriptionText: "Sync settings to controller complete", displayed: false)
+        	result = [configEvt, configMsg]
+            }
+        return result
+    }
+  
+    if (map) {
+    	result = createEvent(map)
+    	//configure after reboot
+        if (map.value == 'warning' || map.value == 'alarm'){
+            def cmds = config()       
+            def alarmEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) } + createEvent(map) + alarmEvt           
+			return result
+		}
+        else if (map.name == 'rainsensor'){
+        	def rainEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+        	result = [createEvent(map), rainEvt]
+            return result
+        }
+	}
+	if (map) log.debug "Parse returned ${map} ${result}"
 	return result
 }
 
 def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
+	(description - 'read attr - ').split(',').inject([:]) { map, param ->
+		def nameAndValue = param.split(':')
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 }
@@ -270,27 +351,28 @@ def getZone(descMap){
     def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
     
     String onoff
-    if(descMap.value == "00"){
-    	onoff = "off"        
+    if(descMap.value == '00'){
+    	onoff = 'off'        
     }    
-    else onoff = "on"
+    else onoff = 'on'
             
     if (EP == 1){
-    	map.name = "switch"
+    	map.name = 'switch'
         map.value = onoff
-        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
+        map.descriptionText = "${device.displayName} turned sprinkler program ${onoff}"
         }
         
     else if (EP == 18) {
-        map.name = "rainsensor"
-    	map.value = "rainSensor" + onoff
-        map.descriptionText = "${device.displayName} rain sensor is $onoff"
+        map.name = 'rainsensor'
+    	log.debug "Rain enable: ${RainEnable}, sensor: ${onoff}"
+        map.value = 'rainSensor' + onoff
+        map.descriptionText = "${device.displayName} rain sensor is ${onoff}"
         }
    	else {
         EP -= 1
-        map.name = "switch" + EP
-    	map.value = "z" + EP + onoff
-    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
+        map.name = 'switch' + EP
+    	map.value = 'z' + EP + onoff
+    	map.descriptionText = "${device.displayName} turned Zone $EP ${onoff}"
     	}
         
     map.isStateChange = true 
@@ -300,37 +382,59 @@ def getZone(descMap){
 
 def getAlarm(descMap){
 	def map = [:]
-    map.name = "status"
+    map.name = 'status'
     def alarmID = Integer.parseInt(descMap.value.trim(), 16)
     log.debug "${alarmID}"
-    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
-    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
-	map.value = "alarm"
-    map.isStateChange = true
+    map.value = 'alarm'
     map.displayed = true
+    map.isStateChange = true
+    if(alarmID <= 0){
+    	map.descriptionText = "${device.displayName} reboot, no other alarms"
+        map.value = 'warning'
+        //map.isStateChange = false
+        }
+    else map.descriptionText = "${device.displayName} reboot, reported zone ${alarmID - 1} error, please check zone is working correctly, press SYNC SETTINGS button to clear"
+       
     return map        
 }
 
 //status notify and change status
-def notify(value, text){	
-	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
+def notify(String val, String txt){
+	sendEvent(name: 'status', value: val, descriptionText: txt, isStateChange: true, display: false)
+    
+    //String txtShort = txt.take(100)
+    sendEvent(name: 'tileMessage', value: txt, descriptionText: "", isStateChange: true, display: false)
+}
 
+def updated(){
+	log.debug "updated"
+    
 }
 
 //prefrences - rain sensor, manual time
 def rain() {
-    log.debug "Rain $RainEnable"
+    log.debug "Rain sensor: ${RainEnable}"
+    if (RainEnable) sendEvent(name: 'rainsensor', value: 'enable', descriptionText: "${device.displayName} rain sensor is enabled", isStateChange: true)
+    else sendEvent(name: 'rainsensor', value: 'disable', descriptionText: "${device.displayName} rain sensor is disabled", isStateChange: true)
+    
     if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
     else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
 }
-def manual(){
-	log.debug "Time $ManualTime"
-    def mTime = 10
-    if (ManualTime) mTime = ManualTime
-    def manualTime = hex(mTime)
-    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"
+
+def manualTime(value){	
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
+}
+
+def manual(){    
+    def newManaul = 10    
+    if (device.latestValue('minutes')) newManaul = device.latestValue('minutes').toInteger()    
+    log.debug "Manual Zone runtime ${newManaul} mins"    
+    def manualTime = hex(newManaul)  
     
-    }
+    def sendCmds = []
+    sendCmds.push("st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}")
+    return sendCmds
+}
 
 //write switch time settings map
 def settingsMap(WriteTimes, attrType){
@@ -366,13 +470,20 @@ def writeTime(wEP, runTime){
 
 //set reporting and binding
 def configure() {
+	
+    sendEvent(name: 'status', value: 'schedule', descriptionText: "Syncing settings to controller")
+    sendEvent(name: 'minutes', value: "10", descriptionText: "Manual Time set to 10 mins", display: false)
+    sendEvent(name: 'tileMessage', value: 'Syncing settings to controller', descriptionText: 'Syncing settings to controller')
+    config()    
+}
+
+def config(){
 
 	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
-	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+	log.debug "Configuring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
     
     def configCmds = [	
-        //program on/off
+        //program on/off        
         "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x09 {${device.zigbeeId}} {}", "delay 1000",        
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
@@ -458,38 +569,16 @@ def configure() {
         "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
         "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + rain() + manual()
+    return configCmds + rain()
 }
 
-
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}    
-
 def refresh() {
 
-	log.debug "refresh"
-    def refreshCmds = [
-	        
+	log.debug "refresh pressed"
+    sendEvent(name: 'tileMessage', value: 'Refresh', descriptionText: 'Refresh')
+        
+    def refreshCmds = [	    
+        
         "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
         
         "st rattr 0x${device.deviceNetworkId} 2 0x0F 0x55", "delay 500",
@@ -513,64 +602,96 @@ def refresh() {
         "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
  	
     ]
-    return refreshCmds + rain() + manual()
+    
+    return refreshCmds
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+//on & off redefined for Alexa to start manual schedule
+def on() {    
+    log.debug 'Alexa on'
+    //schedule subscribes to programOn
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Alexa turned program on')           
+}
+def off() {
+	log.debug 'Alexa off'
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Alexa turned program off')
+    zoff()        
 }
 
 // Commands to device
 //zones on - 8
-def on() {
-    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
-    log.debug "on"
-    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"    
+def zon() {
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
-def off() {
-    log.debug "off"
-    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"    
+def zoff() {
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}" 
 }
 def z1on() {	
-    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
+    return manual() + "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"    
 }
 def z1off() {    
     "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
 }
 def z2on() {	
-    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
 }
 def z2off() {    
     "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
 }
 def z3on() {        
-    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
 }
 def z3off() {	
     "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
 }
 def z4on() {	
-    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
 }
 def z4off() {    
     "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
 }
 def z5on() {	
-	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
 }
 def z5off() {
 	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
 }
 def z6on() {
-	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
 }
 def z6off() {
     "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
 }
 def z7on() {
-	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
 }
 def z7off() {
 	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
 }
 def z8on() {
-	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
 }
 def z8off() {
 	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
@@ -578,50 +699,51 @@ def z8off() {
 
 //zones 9 - 16
 def z9on() {	
-    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
 }
 def z9off() {	    
     "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
 }
 def z10on() {	
-    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
 }
 def z10off() {    
     "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
 }
 def z11on() {        
-    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
 }
 def z11off() {	
     "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
 }
 def z12on() {	
-    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
 }
 def z12off() {    
     "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
 }
 def z13on() {	
-	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
 }
 def z13off() {
 	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
 }
 def z14on() {
-	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
 }
 def z14off() {
     "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
 }
 def z15on() {
-	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
 }
 def z15off() {
 	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
 }
 def z16on() {
-	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
 }
 def z16off() {
 	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
-}
+}
+

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -22,7 +22,7 @@ metadata
     {
 		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
         {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#00a0dc"
 		}
         
     	def detailTiles = ["mainTile"]

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -82,8 +82,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/aeon-multisensor-gen5.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor-gen5.src/README.md

@@ -0,0 +1,43 @@
+# Aeon Multisensor Gen5
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs MultiSensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/sensors/aeon-labs-multisensor-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Aeon Labs MultiSensor (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs MultiSensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-Aeon-Labs-MultiSensor-Gen-5-)

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,10 +20,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
+		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
 
 	simulator {
@@ -64,8 +66,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -98,6 +100,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def result = null
@@ -244,6 +251,13 @@ def configureAfterSecure() {
     secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -59,8 +59,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy

@@ -53,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -0,0 +1,37 @@
+# Aeon Siren
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs Siren (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -20,10 +20,11 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
+	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
  }
 
  simulator {
@@ -58,6 +59,9 @@ metadata {
 }
 
 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -148,3 +152,10 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -42,8 +42,8 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -28,6 +28,8 @@ metadata {
         capability "Refresh"
         capability "Music Player"
         capability "Health Check"
+        capability "Sensor"
+        capability "Actuator"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -67,10 +69,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#00a0dc", nextState:"turningOff"
         state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
         state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#00a0dc"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -81,13 +81,13 @@ metadata {
 			state "fanCirculate", label:'${name}', action:"switchFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
+			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#e86d13"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#1e9cbb"
+			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#00a0dc"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -32,7 +32,7 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
+		attribute "displayThermostatSetpoint", "string" // Added to be able to show "Auto"/"Off" keeping attribute thermostatSetpoint a number
 		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
@@ -43,8 +43,8 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
+		standardTile("temperature", "device.temperature", width: 2, height: 2, decoration: "flat") {
+			state("temperature", label:'${currentValue}°', unit:"F", icon: "st.thermostat.ac.air-conditioning",
 					backgroundColors:[
 							// Celsius
 							[value: 0, color: "#153591"],
@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -81,8 +81,8 @@ metadata {
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("displayThermostatSetpoint", "device.displayThermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "displayThermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
@@ -113,7 +113,7 @@ metadata {
 			state "humidity", label:'${currentValue}%'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "displayThermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}
 
 	preferences {
@@ -185,6 +185,11 @@ def generateEvent(Map results) {
 				isChange = isStateChange(device, name, value.toString())
 				event['isStateChange'] = isChange
 				event['displayed'] = false
+			} else if (name == "thermostatMode") {
+				def mode = value.toString()
+				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				isChange = isStateChange(device, name, mode)
+				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -452,10 +457,10 @@ def emergencyHeat() {
 }
 
 def auxHeatOnly() {
-	log.debug "auxHeatOnly"
+	log.debug "auxHeatOnly = emergency heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxHeatOnly")
+		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -574,17 +579,23 @@ def generateSetpointEvent() {
 	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
+	def averageSetpoint = roundC((heatingSetpoint + coolingSetpoint) / 2)
 	if (mode == "heat") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 	else if (mode == "cool") {
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale, displayed: false)
 	} else if (mode == "auto") {
-		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Auto", displayed: false)
 	} else if (mode == "off") {
-		sendEvent("name":"thermostatSetpoint", "value":"Off")
-	} else if (mode == "auxHeatOnly") {
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 }
 
@@ -621,13 +632,14 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -666,13 +678,14 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -706,7 +719,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
+		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -735,15 +748,18 @@ void alterSetpoint(temp) {
 
 		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "displayThermostatSetpoint", "value": temp.value, displayed: false)
 			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
 			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
+			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			}
 		}
 
@@ -759,6 +775,7 @@ def generateStatusEvent() {
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
 	def statusText
+	def operatingState = "idle"
 
 	log.debug "Generate Status Event for Mode = ${mode}"
 	log.debug "Temperature = ${temperature}"
@@ -767,20 +784,29 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-		if (temperature >= heatingSetpoint)
+		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+			operatingState = "heating"
+		}
 	} else if (mode == "cool") {
-		if (temperature <= coolingSetpoint)
+		if (temperature <= coolingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
+			operatingState = "cooling"
+		}
 	} else if (mode == "auto") {
 		statusText = "Right Now: Auto"
+		if (temperature < heatingSetpoint) {
+			operatingState = "heating"
+		} else if (temperature > coolingSetpoint) {
+			operatingState = "cooling"
+		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
@@ -788,6 +814,7 @@ def generateStatusEvent() {
 
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
+	sendEvent("name":"thermostatOperatingState", "value":operatingState, "description":operatingState, displayed: false)
 }
 
 def generateActivityFeedsEvent(notificationMessage) {

devicetypes/smartthings/econet-vent.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/econet-vent.src/README.md

@@ -0,0 +1,43 @@
+# EcoNet Vent
+
+Cloud Execution
+
+Works with: 
+
+* [EcoNet Controls Z-Wave Vent](https://www.smartthings.com/works-with-smartthings/econet-controls/econet-controls-z-wave-vent)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - allows for the control of the level attribute of a light
+* **Actuator** - represents that a Device has commands
+* **Switch** - allows for the control of a switch device
+* **Battery** - defines that the device has a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Polling** - allows for the polling of devices that support it
+* **Configuration** - allow configuration of devices that support it
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+EcoNet Controls Z-Wave Vent is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [EcoNet Controls Z-Wave Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204556420-EcoNet-EV100-Vent)

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,11 +26,13 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
+		// capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
+		// fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -53,7 +55,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
+			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#00a0dc"
 			state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
 		}
         valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
@@ -85,6 +87,8 @@ def parse(String description) {
 
 //send the command to stop polling
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	// sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 
@@ -169,6 +173,13 @@ def setLevel(value, duration) {
 	setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/everspring-flood-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/everspring-flood-sensor.src/README.md

@@ -0,0 +1,40 @@
+# Everspring Flood Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Everspring Water Detector](https://www.smartthings.com/works-with-smartthings/sensors/everspring-water-detector)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Everspring Water Detector is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+Three AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Everspring Water Detector Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088304-Everspring-Water-Detector)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0xA102", inClusters: "0x86,0x72,0x85,0x84,0x80,0x70,0x9C,0x20,0x71"
 	}
@@ -138,6 +139,8 @@ def zwaveEvent(physicalgraph.zwave.Command cmd)
 
 def configure()
 {
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	if (!device.currentState("battery")) {
 		sendEvent(name: "battery", value:100, unit:"%", descriptionText:"(Default battery event)", displayed:false)
 	}

devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy

@@ -56,9 +56,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/fibaro-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/fibaro-door-window-sensor.src/README.md

@@ -0,0 +1,40 @@
+# Fibaro Door Window Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -39,7 +39,8 @@
 		capability 	"Contact Sensor"
 		capability 	"Sensor"
 		capability 	"Battery"
-        capability 	"Configuration"
+		capability 	"Configuration"
+		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -266,6 +267,9 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
  */
 def configure() {
 	log.debug "Configuring Device..."
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	def cmds = []
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], parameterNumber: 1, size: 2).format()
 	// send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -1,12 +1,12 @@
 /**
  *  Device Type Definition File
  *
- *  Device Type:		Fibaro Flood Sensor
- *  File Name:			fibaro-flood-sensor.groovy
- *	Initial Release:	2014-12-10
- *	@author:			Todd Wackford
- *  Email:				todd@wackford.net
- *  @version:			1.0
+ *  Device Type:        Fibaro Flood Sensor
+ *  File Name:          fibaro-flood-sensor.groovy
+ *  Initial Release:    2014-12-10
+ *  @author:            Todd Wackford
+ *  Email:              todd@wackford.net
+ *  @version:           1.0
  *
  *  Copyright 2014 SmartThings
  *
@@ -26,8 +26,8 @@
  * not displayed to the user. We do this so we can receive events and display on device 
  * activity. If the user wants to display the tamper tile, adjust the tile display lines
  * with the following:
- *		main(["water", "temperature", "tamper"])
- *		details(["water", "temperature", "battery", "tamper"])
+ *      main(["water", "temperature", "tamper"])
+ *      details(["water", "temperature", "battery", "tamper"])
  *
  * @param none
  *
@@ -40,13 +40,17 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Health Check"
-       
-        command		"resetParams2StDefaults"
-        command		"listCurrentParams"
-        command		"updateZwaveParam"
-        command		"test"
-        
+    capability "Sensor"
+    
+		command    "resetParams2StDefaults"
+		command    "listCurrentParams"
+		command    "updateZwaveParam"
+		command    "test"
+
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
+		fingerprint mfr:"010F", prod:"0000", model:"2002"
+		fingerprint mfr:"010F", prod:"0000", model:"1002"
+		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -73,7 +77,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -87,9 +91,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        standardTile("tamper", "device.tamper") {
-			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+		standardTile("tamper", "device.tamper") {
+			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -107,26 +111,17 @@ metadata {
 def parse(String description)
 {
 	def result = []
-	
-    if (description == "updated") {
-    	if (!state.MSR) {
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
-			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		} 
-    } else {
-		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
-    
-		if (cmd) {
-			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
-		}
-    }
-    
-    result << response(zwave.batteryV1.batteryGet().format())
-    
-    if ( result[0] != null ) {
+
+	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+
+	if (cmd) {
+		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+	}
+
+	if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-    }
+	}
 }
 
 
@@ -143,10 +138,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result += lateConfigure(true)
+		result << lateConfigure(true)
 	} else {
-		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-        log.debug "We're done with WakeUp!"
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
 	result
 }
@@ -154,7 +148,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-    
+
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -185,7 +179,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-    
+
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -200,49 +194,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-    log.debug "BasicSet with CMD = ${cmd}"
-    
-    if (!isConfigured()) {
-    	def result = []
-    	def map = [:]
-    
-    	map.name = "water"
+	log.debug "BasicSet with CMD = ${cmd}"
+
+	if (!isConfigured()) {
+		def result = []
+		def map = [:]
+
+		map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-    
-    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-    	result += lateConfigure(true)
-    
-    	result << createEvent(map)
-        
-        result
-    }
+
+		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+		result += lateConfigure(true)
+
+		result << createEvent(map)
+
+		result
+	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-    
+
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-        
-        log.debug "CMD = SensorAlarmReport: ${cmd}"
-    	setConfigured()
-    } else if ( cmd.sensorType == 0) {
-    	map.name = "tamper"
-        map.isStateChange = true
-        map.value = cmd.sensorState ? "tampered" : "secure"
-        map.descriptionText = "${device.displayName} has been tampered with"
-        runIn(30, "resetTamper") //device does not send alarm cancelation
-        
-    } else if ( cmd.sensorType == 1) {
-    	map.name = "tamper"
-        map.value = cmd.sensorState ? "tampered" : "secure"
-        map.descriptionText = "${device.displayName} has been tampered with"
-        runIn(30, "resetTamper") //device does not send alarm cancelation
-        
+
+		log.debug "CMD = SensorAlarmReport: ${cmd}"
+		setConfigured()
+	} else if ( cmd.sensorType == 0) {
+		map.name = "tamper"
+		map.isStateChange = true
+		map.value = cmd.sensorState ? "tampered" : "secure"
+		map.descriptionText = "${device.displayName} has been tampered with"
+		runIn(30, "resetTamper") //device does not send alarm cancelation
+
+	} else if ( cmd.sensorType == 1) {
+		map.name = "tamper"
+		map.value = cmd.sensorState ? "tampered" : "secure"
+		map.descriptionText = "${device.displayName} has been tampered with"
+		runIn(30, "resetTamper") //device does not send alarm cancelation
+
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -251,10 +245,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 
 def resetTamper() {
 	def map = [:]
-    map.name = "tamper"
-    map.value = "secure"
-    map.descriptionText = "$device.displayName is secure"
-    sendEvent(map)
+	map.name = "tamper"
+	map.value = "secure"
+	map.descriptionText = "$device.displayName is secure"
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -268,10 +262,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-    
-    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-    	result += lateConfigure(true)
-    }
+
+	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+		result += lateConfigure(true)
+	}
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -283,17 +277,17 @@ def setConfigured() {
 
 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-    
-    return configured
+
+	return configured
 }
 
 def lateConfigure(setConf = False) {
 	def res = response(configure())
-    
-    if (setConf)
-        setConfigured()
-        
-    return res
+
+	if (setConf)
+		setConfigured()
+
+	return res
 }
 
  /**
@@ -305,29 +299,34 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-    def cmds = []
-    
-    // send associate to group 2 to get alarm data
-    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-    
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-    
-    // send associate to group 3 to get sensor data reported only to hub
-    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
+	// default initial state
+	sendEvent(name: "water", value: "dry")
 
-	// temp hysteresis set to .5 degrees celcius
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+	def cmds = []
+
+	// send associate to group 2 to get alarm data
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
+
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
+
+	// send associate to group 3 to get sensor data reported only to hub
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// reporting frequency of temps and battery set to one hour
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-    
-    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-    
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+
+	// temp hysteresis set to .5 degrees celcius
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+
+	cmds << zwave.batteryV1.batteryGet().format()
+
+	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
 	delayBetween(cmds, 100)
 }
 
@@ -353,18 +352,18 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {     
-        def pNumber = params.paramNumber
-        def pSize	= params.size
-        def pValue	= [params.value]
-        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+	if ( params ) {
+		def pNumber = params.paramNumber
+		def pSize	= params.size
+		def pValue	= [params.value]
+		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
 
 		def cmds = []
-        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)        
-    }
+		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+		delayBetween(cmds, 1000)
+	}
 }
 
  /**
@@ -381,26 +380,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
-    
-    delayBetween(cmds, 1200)
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
+
+	delayBetween(cmds, 1200)
 }
 
  /**
@@ -417,25 +416,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-    
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+
 	delayBetween(cmds, 1200)
 }
 

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -82,8 +82,8 @@
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',

devicetypes/smartthings/fortrezz-water-valve.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/fortrezz-water-valve.src/README.md

@@ -0,0 +1,39 @@
+# FortrezZ Water Valve
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Water Valve](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Valve** - allows for the control of a valve device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+FortrezZ Water Valve is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Water Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088434-FortrezZ-Water-Valve-Shutoff)

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -14,11 +14,13 @@
 metadata {
 	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
+		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
         
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
+		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
 
 	// simulator metadata
@@ -48,6 +50,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	log.trace description
 	def result = null
@@ -76,6 +83,13 @@ def close() {
 	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -39,8 +39,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -32,8 +32,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
         
          valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -42,8 +42,8 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
 		}
 
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/plant-link.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/plant-link.src/README.md

@@ -0,0 +1,35 @@
+# Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Relative Humidity Measurement** - allows reading the relative humidity from devices that support it
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a Z-wave sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)

devicetypes/smartthings/plant-link.src/plant-link.groovy

@@ -21,8 +21,10 @@ metadata {
 		capability "Relative Humidity Measurement"
 		capability "Battery"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0405,FC08", outClusters: "0003"
+		fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0B04", outClusters: "0003", manufacturer: "", model: "", deviceJoinName: "OSO Technologies PlantLink Soil Moisture Sensor"
 	}
 
 	tiles {
@@ -48,6 +50,11 @@ metadata {
 	}
 }
 
+def updated() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description) {
 	log.debug "Parse description $description"

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -16,7 +16,7 @@
  *	Date: 2013-12-04
  */
 metadata {
-	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Power Meter"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -15,7 +15,7 @@
  */
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -33,6 +33,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-G", deviceJoinName: "Centralite Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -58,7 +59,7 @@ metadata {
 		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
+				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#00A0DC"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -106,6 +107,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-moisture.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-moisture.src/README.md

@@ -0,0 +1,36 @@
+# Smartsense Moisture
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Moisture Sensor](https://www.smartthings.com/works-with-smartthings/fortrezz/fortrezz-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Temperature Measurement** - represents capability to measure temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Smartsense Moisture is a Z-wave sleepy device type and checks in every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [FortrezZ Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200930740-FortrezZ-Moisture-Sensor)

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -17,9 +17,11 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
         capability "Temperature Measurement"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
+		fingerprint mfr:"0084", prod:"0063", model:"010C", deviceJoinName: "FortrezZ Moisture Sensor"
 	}
 
 	simulator {
@@ -89,6 +91,11 @@ def parse(String description) {
 	return result
 }
 
+def updated() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 {
 	[descriptionText: "${device.displayName} woke up", isStateChange: false]

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -34,6 +34,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3328-G", deviceJoinName: "Centralite Micro Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv5", deviceJoinName: "Motion Sensor"
 	}
@@ -112,6 +113,12 @@ def parse(String description) {
 				map = getMotionResult(value)
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -30,8 +30,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -33,6 +33,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -52,14 +52,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}
 
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 			}
 		}
 
@@ -95,6 +95,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -88,6 +88,12 @@ def parse(String description) {
 				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -23,6 +23,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -41,8 +42,8 @@ metadata {
 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -18,7 +18,7 @@
 
 
 metadata {
-	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Polling"

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -16,7 +16,7 @@
  * Date: 2015-10-11
  */
  metadata {
- 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
         capability "Actuator"
         capability "Switch"
         capability "Polling"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -44,7 +44,7 @@ metadata {
     tiles {
         standardTile("button", "device.button", width: 2, height: 2) {
             state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
         }
 
         valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-switch.src/README.md

@@ -0,0 +1,35 @@
+# Leviton Switch (ZigBee)
+
+Cloud Execution
+
+Works with:
+
+* [Leviton Switch (ZigBee)](https://www.smartthings.com/works-with-smartthings/leviton/leviton-switch)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Zigbee Switch with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209686003-How-to-connect-Leviton-ZigBee-devices)

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -13,11 +13,12 @@
  */
 
 metadata {
-    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
         capability "Switch"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
@@ -75,11 +76,20 @@ def on() {
     zigbee.on()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.onOffConfig()
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffRefresh() + zigbee.onOffConfig()
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Health Check"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_RL5601", deviceJoinName: "Halo RL56"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..5000)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if (event.name == "colorTemperature") {
+            event.unit = "K"
+        }
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def refresh() {
+	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
+	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
+        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    }
+    
+	cmds
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
+def configure() {
+    log.debug "configure()"
+    configureHealthCheck()
+    // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName, displayed: false)
+    }
+}

devicetypes/smartthings/zooz-power-strip-outlet.src/zooz-power-strip-outlet.groovy

@@ -0,0 +1,41 @@
+/**
+ *  Zooz Power Strip Outlet
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip Outlet", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}

devicetypes/smartthings/zooz-power-strip.src/zooz-power-strip.groovy

@@ -0,0 +1,217 @@
+/**
+ *  Zooz ZEN20 Power Strip Outlet
+ *
+ *  Implementation of the Zooz ZEN20 power strip that uses the new composite device capabilities to provide individual
+ *  control of each outlet from SmartApps as well as the mobile app. Incorporates contributions from:
+ *
+ *  Eric Maycock (https://github.com/erocm123/SmartThingsPublic/blob/master/devicetypes/erocm123/zooz-power-strip.src/zooz-power-strip.groovy)
+ *  Robert Vandervoort (https://github.com/robertvandervoort/SmartThings/blob/master/zooZ-Strip-ZEN20/device_type-zooZ-strip-ZEN20_v1.0)
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Configuration"
+
+		fingerprint manufacturer: "015D", prod: "0651", model: "F51C", deviceJoinName: "Zooz ZEN 20 Power Strip"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		childDeviceTiles("outlets")
+		standardTile("refresh", "device.switch", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def installed() {
+	createChildDevices()
+}
+
+def updated() {
+	if (!childDevices) {
+		createChildDevices()
+	}
+	else if (device.label != state.oldLabel) {
+		childDevices.each {
+			def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+			it.setLabel(newLabel)
+		}
+		state.oldLabel = device.label
+	}
+}
+
+def configure() {
+	refresh()
+}
+
+
+//////////////////////
+// Event Generation //
+//////////////////////
+def parse(String description) {
+	trace "parse('$description')"
+	def result = []
+	if (description.startsWith("Err")) {
+		result = createEvent(descriptionText:description, isStateChange:true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x60: 3, 0x32: 3, 0x25: 1, 0x20: 1])
+		if (cmd) {
+			result += zwaveEvent(cmd, 1)
+		}
+		else {
+			log.warn "Unparsed description $description"
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd, ep) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveBinaryEvent(cmd, endpoint) {
+	def result = []
+	def children = childDevices
+	def childDevice = children.find{it.deviceNetworkId.endsWith("$endpoint")}
+	if (childDevice) {
+		childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+
+		if (cmd.value) {
+			// One on and the strip is on
+			result << createEvent(name: "switch", value: "on")
+		} else {
+			// All off and the strip is off
+			if (!children.any { it.currentValue("switch") == "on" }) {
+				result << createEvent(name: "switch", value: "off")
+			}
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, ep) {
+	updateDataValue("MSR", String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId))
+	return null
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, ep) {
+	trace "applicationVersion $cmd.applicationVersion"
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd, ep) {
+	log.warn("${device.displayName}: Unhandled ${cmd}" + (ep ? " from endpoint $ep" : ""))
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def on() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+def off() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+//////////////////////
+// Child Device API //
+//////////////////////
+void childOn(String dni) {
+	onOffCmd(0xFF, channelNumber(dni))
+}
+
+void childOff(String dni) {
+	onOffCmd(0, channelNumber(dni))
+}
+
+def refresh() {
+	def cmds = (1..5).collect { endpoint ->
+		encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)
+	}
+	delayBetween(cmds, 100)
+}
+
+///////////////////
+// Local Methods //
+///////////////////
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+
+private void onOffCmd(value, endpoint = null) {
+	def actions = [
+			new physicalgraph.device.HubAction(encap(zwave.basicV1.basicSet(value: value), endpoint)),
+			new physicalgraph.device.HubAction(encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)),
+	]
+	sendHubCommand(actions, 500)
+}
+
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..5) {
+		addChildDevice("Zooz Power Strip Outlet", "${device.deviceNetworkId}-ep${i}", null,
+				[completedSetup: true, label: "${device.displayName} (CH${i})",
+				 isComponent: true, componentName: "ch$i", componentLabel: "Channel $i"])
+	}
+}
+
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:endpoint).encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private trace(msg) {
+	//log.trace(msg)
+}

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -40,7 +40,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/zwave-device.src/zwave-device.groovy

@@ -33,7 +33,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"

devicetypes/smartthings/zwave-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-door-window-sensor.src/README.md

@@ -0,0 +1,36 @@
+# Z-Wave Door Window Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Door/Window Sensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-doorwindow-sensor-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+* **Battery** - defines that the device has a battery
+* **Contact Sensor** - allows reading the value of a contact sensor device
+
+## Device Health
+
+Z-Wave Door Window Sensor is a Z-wave sleepy device and checks in every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
+for the different models:
+* [Aeon Labs Door/Window Sensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/211834163-How-to-connect-Aeon-Labs-door-window-sensors)

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -22,12 +22,14 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
 		capability "Configuration"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
 	}
 
 	// simulator metadata
@@ -41,8 +43,8 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -78,6 +80,8 @@ def parse(String description) {
 }
 
 def updated() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [

devicetypes/smartthings/zwave-garage-door-opener.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-garage-door-opener.src/README.md

@@ -0,0 +1,41 @@
+# Z-wave Garage Door Opener
+
+Cloud Execution
+
+Works with: 
+
+* [Linear GoControl Garage Door Opener](https://www.smartthings.com/works-with-smartthings/other/linear-gocontrol-garage-door-opener)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Door Control** - allow for the control of a door
+* **Garage Door Control** - allow for the control of a garage door
+* **Health Check** - indicates ability to get device health notifications
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Linear GoControl Garage Door Opener is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Linear GoControl Garage Door Opener Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204831116-GoControl-Linear-Garage-Door-Opener-GD00Z-4-)

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -18,12 +18,14 @@ metadata {
 		capability "Actuator"
 		capability "Door Control"
 		capability "Garage Door Control"
+		capability "Health Check"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x4007", inClusters: "0x98"
 		fingerprint deviceId: "0x4006", inClusters: "0x98"
+		fingerprint mfr:"014F", prod:"4744", model:"3030", deviceJoinName: "Linear GoControl Garage Door Opener"
 	}
 
 	simulator {
@@ -39,11 +41,11 @@ metadata {
 
 	tiles {
 		standardTile("toggle", "device.door", width: 2, height: 2) {
-			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
-			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
-			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
-			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffffff")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#00a0dc", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#e86d13", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#e86d13")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00a0dc")
 			
 		}
 		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
@@ -63,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description.startsWith("Err")) {
@@ -287,6 +294,13 @@ def close() {
 	secure(zwave.barrierOperatorV1.barrierOperatorSet(requestedBarrierState: BarrierOperatorSet.REQUESTED_BARRIER_STATE_CLOSE))
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	secure(zwave.barrierOperatorV1.barrierOperatorGet())
 }

devicetypes/smartthings/zwave-lock.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-lock.src/README.md

@@ -0,0 +1,45 @@
+# Z-Wave Switch
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Key Free Touchscreen Deadbolt (YRD240)](https://www.smartthings.com/works-with-smartthings/yale/yale-key-free-touchscreen-deadbolt-yrd240)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Battery** - defines device uses a battery
+* **Lock** - allows for the control of a lock device
+* **Lock Codes** - allows for the lock code control of a lock device
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Locks are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave/ZigBee Yale Lock Troubleshooting](https://support.smartthings.com/hc/en-us/articles/205138400-How-to-connect-Yale-locks)
+
+

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -20,11 +20,13 @@ metadata {
 		capability "Sensor"
 		capability "Lock Codes"
 		capability "Battery"
+		capability "Health Check"
 
 		command "unlockwtimeout"
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
 	}
 
 	simulator {
@@ -38,10 +40,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.lock", key: "PRIMARY_CONTROL") {
-				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
+				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC", nextState:"unlocking"
 				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
+				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
 				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 			}
 		}
@@ -67,6 +69,8 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -504,6 +508,13 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	def cmds = [secure(zwave.doorLockV1.doorLockOperationGet())]
 	if (state.assoc == zwaveHubNodeId) {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Energy Meter"
 		capability "Actuator"
 		capability "Switch"
@@ -22,10 +22,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Light"
+		capability "Health Check"
 
 		command "reset"
 
 		fingerprint inClusters: "0x25,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"0012", deviceJoinName: "Aeon Labs Micro Smart Switch"
 	}
 
 	// simulator metadata
@@ -51,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power") {
@@ -73,6 +75,8 @@ metadata {
 }
 
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.MSR) {
 			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -82,7 +86,7 @@ def updated() {
 
 def parse(String description) {
 	def result = null
-	if(description == "updated") return 
+	if(description == "updated") return
 	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
 	if (cmd) {
 		result = zwaveEvent(cmd)
@@ -179,6 +183,14 @@ def poll() {
 	])
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-motion-sensor.src/README.md

@@ -0,0 +1,39 @@
+# Z-wave Motion Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Ecolink PIR Motion Detector with Pet Immunity](https://www.smartthings.com/works-with-smartthings/sensors/ecolink-pir-motion-detector-with-pet-immunity)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Ecolink PIR Motion Detector with Pet Immunity is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One CR123A Lithium 3V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Ecolink PIR Motion Detector with Pet Immunity Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294400-Ecolink-PIR-Motion-Detector-PIRZWAVE2-ECO-)

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
 		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
@@ -38,8 +39,8 @@ metadata {
 	
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state("battery", label:'${currentValue}% battery', unit:"")
@@ -50,6 +51,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description.startsWith("Err")) {

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/zwave-sensor.src/zwave-sensor.groovy

@@ -32,8 +32,8 @@ metadata {
 
 	tiles {
 		standardTile("sensor", "device.sensor", width: 2, height: 2) {
-			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#ffffff")
-			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#53a7c0")
+			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#cccccc")
+			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#00A0DC")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/zwave-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-siren.src/README.md

@@ -0,0 +1,42 @@
+# Z-wave Siren
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Switch** - can detect state (possible values: on/off)
+
+## Device Health
+
+FortrezZ Siren Strobe Alarm is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
+		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -27,6 +28,7 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -58,6 +60,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -119,6 +126,13 @@ def both() {
 	on()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-smoke-alarm.src/README.md

@@ -0,0 +1,40 @@
+# Z-wave Smoke Alarm
+
+Cloud Execution
+
+Works with: 
+
+* [First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)](https://www.smartthings.com/works-with-smartthings/sensors/first-alert-smoke-detector-and-carbon-monoxide-alarm-zcombo)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Smoke Detector** - measure smoke and optionally carbon monoxide levels
+* **Carbon Monoxide Detector** - measure carbon monoxide levels
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO) is a Z-wave sleepy device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+* __122min__ checkInterval
+
+## Battery Specification
+
+Two AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201581984-First-Alert-Smoke-Detector-and-Carbon-Monoxide-Alarm-ZCOMBO-)

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -17,10 +17,12 @@ metadata {
 		capability "Carbon Monoxide Detector"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 
 	simulator {
@@ -51,6 +53,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def results = []
 	if (description.startsWith("Err")) {
@@ -65,7 +72,6 @@ def parse(String description) {
 	return results
 }
 
-
 def createSmokeOrCOEvents(name, results) {
 	def text = null
 	switch (name) {

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Health Check"
  		capability "Switch"
@@ -47,7 +47,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-switch-secure.src/zwave-switch-secure.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Refresh"
 		capability "Polling"

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Indicator"
  		capability "Switch"
@@ -46,7 +46,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Polling"
 		capability "Sensor"
+		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -30,6 +31,7 @@ metadata {
 
 		fingerprint deviceId: "0x08"
 		fingerprint inClusters: "0x43,0x40,0x44,0x31"
+		fingerprint mfr:"0039", prod:"0011", model:"0001", deviceJoinName: "Honeywell Z-Wave Thermostat"
 	}
 
 	// simulator metadata
@@ -40,9 +42,9 @@ metadata {
 		status "auto"			: "command: 4003, payload: 03"
 		status "emergencyHeat"	: "command: 4003, payload: 04"
 
-		status "fanAuto"		: "command: 4403, payload: 00"
-		status "fanOn"			: "command: 4403, payload: 01"
-		status "fanCirculate"	: "command: 4403, payload: 06"
+		status "auto"			: "command: 4403, payload: 00" // "fanAuto"
+		status "on"				: "command: 4403, payload: 01" // "fanOn"
+		status "circulate"		: "command: 4403, payload: 06" // "fanCirculate
 
 		status "heat 60"        : "command: 4303, payload: 01 09 3C"
 		status "heat 68"        : "command: 4303, payload: 01 09 44"
@@ -72,8 +74,9 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
+		// Using standardTile instead of valueTile as it renders the icon better
+		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', icon: "st.thermostat.ac.air-conditioning",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -86,19 +89,20 @@ metadata {
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "off", label:'${name}', action:"switchMode", nextState:"to_heat"
-			state "heat", label:'${name}', action:"switchMode", nextState:"to_cool"
-			state "cool", label:'${name}', action:"switchMode", nextState:"..."
-			state "auto", label:'${name}', action:"switchMode", nextState:"..."
-			state "emergency heat", label:'${name}', action:"switchMode", nextState:"..."
-			state "to_heat", label: "heat", action:"switchMode", nextState:"to_cool"
-			state "to_cool", label: "cool", action:"switchMode", nextState:"..."
+			state "off", action:"switchMode", nextState:"to_heat", icon: "st.thermostat.heating-cooling-off"
+			state "heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
+			state "auto", action:"switchMode", nextState:"...", icon: "st.thermostat.auto"
+			state "emergency heat", action:"switchMode", nextState:"...", icon: "st.thermostat.emergency-heat"
+			state "to_heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "to_cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
 			state "...", label: "...", action:"off", nextState:"off"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "fanAuto", label:'${name}', action:"switchFanMode"
-			state "fanOn", label:'${name}', action:"switchFanMode"
-			state "fanCirculate", label:'${name}', action:"switchFanMode"
+			state "auto", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-auto" // "fanAuto"
+			state "on", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-on" // "fanOn"
+			state "circulate", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-circulate" // "fanCirculate"
+			state "...", label: "...", nextState:"..."
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
@@ -115,14 +119,16 @@ metadata {
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"polling.poll", icon:"st.secondary.refresh"
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
 		main "temperature"
-		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh", "configure"])
+		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
 	}
 }
 
+def updated(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def map = createEvent(zwaveEvent(zwave.parse(description, [0x42:1, 0x43:2, 0x31: 3])))
@@ -279,13 +285,13 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 	def map = [:]
 	switch (cmd.fanMode) {
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
-			map.value = "fanAuto"
+			map.value = "auto" // "fanAuto"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_LOW:
-			map.value = "fanOn"
+			map.value = "on" // "fanOn"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_CIRCULATION:
-			map.value = "fanCirculate"
+			map.value = "circulate" // "fanCirculate"
 			break
 	}
 	map.name = "thermostatFanMode"
@@ -302,15 +308,19 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSuppo
 	if(cmd.auto) { supportedModes += "auto " }
 
 	state.supportedModes = supportedModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
 	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "fanAuto " }
-	if(cmd.low) { supportedFanModes += "fanOn " }
-	if(cmd.circulation) { supportedFanModes += "fanCirculate " }
+	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
+	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
+	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
 
 	state.supportedFanModes = supportedFanModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
@@ -393,11 +403,25 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	poll()
+}
+
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
 		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format()
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
 	], 2300)
 }
 
@@ -438,11 +462,11 @@ def switchToMode(nextMode) {
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
 	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "fanAuto fanOn"
-	def modeOrder = ["fanAuto", "fanCirculate", "fanOn"]
+	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
+	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
-	while (!supportedModes?.contains(nextMode) && nextMode != "fanAuto") {
+	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
 		nextMode = next(nextMode)
 	}
 	switchToFanMode(nextMode)
@@ -453,11 +477,11 @@ def switchToFanMode(nextMode) {
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand
-	if (nextMode == "fanAuto") {
+	if (nextMode == "auto") { // "fanAuto"
 		returnCommand = fanAuto()
-	} else if (nextMode == "fanOn") {
+	} else if (nextMode == "on") { // "fanOn"
 		returnCommand = fanOn()
-	} else if (nextMode == "fanCirculate") {
+	} else if (nextMode == "circulate") { // "fanCirculate"
 		returnCommand = fanCirculate()
 	} else {
 		log.debug("no fan mode '$nextMode'")

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -33,7 +33,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""