Merge pull request #1555 from skt123/micro_smart_switch

[CHF-493] Added Health Check Implementation for Micro Smart Switch 2E.
Merge pull request #1820 from rappleg/FixSmartSenseMultiBackgroundColor
2026-03-09 05:11:52 +00:00 · 2017-03-22 10:06:11 -07:00 · 2017-03-22 11:28:03 -05:00 · 2017-03-22 11:21:04 -05:00 · 2017-03-22 15:22:13 +05:30 · 2017-03-22 15:17:55 +05:30
49 changed files with 495 additions and 56 deletions
--- a/devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy
+++ b/devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy
@@ -40,10 +40,10 @@ metadata {
    // UI tile definitions
    tiles {
        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#00a0dc"
            state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#e86d13"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
        }
        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
            state "level", action:"switch level.setLevel"
--- a/devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy
+++ b/devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy
@@ -22,7 +22,7 @@ metadata
    {
 		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
        {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#00a0dc"
 		}
        
    	def detailTiles = ["mainTile"]
--- a/devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy
+++ b/devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy
@@ -82,8 +82,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/aeon-multisensor-gen5.src/.st-ignore
+++ b/devicetypes/smartthings/aeon-multisensor-gen5.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/aeon-multisensor-gen5.src/README.md
+++ b/devicetypes/smartthings/aeon-multisensor-gen5.src/README.md
@@ -0,0 +1,43 @@
+# Aeon Multisensor Gen5
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs MultiSensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/sensors/aeon-labs-multisensor-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Aeon Labs MultiSensor (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs MultiSensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-Aeon-Labs-MultiSensor-Gen-5-)
--- a/devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy
+++ b/devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy
@@ -20,10 +20,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"

 		command "configureAfterSecure"

 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
+		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}

 	simulator {
@@ -64,8 +66,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -98,6 +100,11 @@ metadata {
 	}
 }

+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def result = null
@@ -244,6 +251,13 @@ def configureAfterSecure() {
    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	// log.debug "configure()"
    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
--- a/devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy
+++ b/devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy
@@ -59,8 +59,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy
+++ b/devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy
@@ -53,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {
--- a/devicetypes/smartthings/aeon-siren.src/.st-ignore
+++ b/devicetypes/smartthings/aeon-siren.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/aeon-siren.src/README.md
+++ b/devicetypes/smartthings/aeon-siren.src/README.md
@@ -0,0 +1,37 @@
+# Aeon Siren
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs Siren (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)
--- a/devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy
+++ b/devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy
@@ -20,10 +20,11 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
+	capability "Health Check"

 	command "test"

-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
 }

 simulator {
@@ -58,6 +59,9 @@ metadata {
 }

 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3

@@ -148,3 +152,10 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}
--- a/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
+++ b/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
@@ -42,8 +42,8 @@ metadata {

 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
--- a/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
+++ b/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
@@ -67,10 +67,10 @@ metadata {
    }

    standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#00a0dc", nextState:"turningOff"
        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#00a0dc"
    }
    valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
        state "station1", label:'${currentValue}', action:"preset1"
--- a/devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy
+++ b/devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy
@@ -81,13 +81,13 @@ metadata {
 			state "fanCirculate", label:'${name}', action:"switchFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
+			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#e86d13"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#1e9cbb"
+			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#00a0dc"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
--- a/devicetypes/smartthings/econet-vent.src/econet-vent.groovy
+++ b/devicetypes/smartthings/econet-vent.src/econet-vent.groovy
@@ -53,7 +53,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
+			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#00a0dc"
 			state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
 		}
        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy
+++ b/devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy
@@ -56,9 +56,9 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy
@@ -77,7 +77,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -93,7 +93,7 @@ metadata {
 		}
 		standardTile("tamper", "device.tamper") {
 			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
--- a/devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy
@@ -82,8 +82,8 @@

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
--- a/devicetypes/smartthings/fortrezz-water-valve.src/.st-ignore
+++ b/devicetypes/smartthings/fortrezz-water-valve.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/fortrezz-water-valve.src/README.md
+++ b/devicetypes/smartthings/fortrezz-water-valve.src/README.md
@@ -0,0 +1,39 @@
+# FortrezZ Water Valve
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Water Valve](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Valve** - allows for the control of a valve device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+FortrezZ Water Valve is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Water Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088434-FortrezZ-Water-Valve-Shutoff)
--- a/devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy
+++ b/devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy
@@ -14,11 +14,13 @@
 metadata {
 	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
+		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
        
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
+		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}

 	// simulator metadata
@@ -48,6 +50,11 @@ metadata {
 	}
 }

+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	log.trace description
 	def result = null
@@ -76,6 +83,13 @@ def close() {
 	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
--- a/devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy
@@ -42,8 +42,8 @@ metadata {

 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
 		}

 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -33,6 +33,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-G", deviceJoinName: "Centralite Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}

@@ -58,7 +59,7 @@ metadata {
 		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
+				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#00A0DC"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -106,6 +107,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -34,6 +34,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3328-G", deviceJoinName: "Centralite Micro Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv5", deviceJoinName: "Motion Sensor"
 	}
@@ -112,6 +113,12 @@ def parse(String description) {
 				map = getMotionResult(value)
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
--- a/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
+++ b/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
@@ -30,8 +30,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -33,6 +33,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"

 		attribute "status", "string"
--- a/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
+++ b/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
@@ -52,14 +52,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}

 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -95,6 +95,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -88,6 +88,12 @@ def parse(String description) {
 				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
--- a/devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy
+++ b/devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy
@@ -41,8 +41,8 @@ metadata {

 	tiles {
    	standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}

 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
--- a/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
+++ b/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
@@ -44,7 +44,7 @@ metadata {
    tiles {
        standardTile("button", "device.button", width: 2, height: 2) {
            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
        }

        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
--- a/devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy
+++ b/devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy
@@ -40,7 +40,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
@@ -41,8 +41,8 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
--- a/devicetypes/smartthings/zwave-garage-door-opener.src/.st-ignore
+++ b/devicetypes/smartthings/zwave-garage-door-opener.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zwave-garage-door-opener.src/README.md
+++ b/devicetypes/smartthings/zwave-garage-door-opener.src/README.md
@@ -0,0 +1,41 @@
+# Z-wave Garage Door Opener
+
+Cloud Execution
+
+Works with: 
+
+* [Linear GoControl Garage Door Opener](https://www.smartthings.com/works-with-smartthings/other/linear-gocontrol-garage-door-opener)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Door Control** - allow for the control of a door
+* **Garage Door Control** - allow for the control of a garage door
+* **Health Check** - indicates ability to get device health notifications
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Linear GoControl Garage Door Opener is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Linear GoControl Garage Door Opener Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204831116-GoControl-Linear-Garage-Door-Opener-GD00Z-4-)
--- a/devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy
+++ b/devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy
@@ -18,12 +18,14 @@ metadata {
 		capability "Actuator"
 		capability "Door Control"
 		capability "Garage Door Control"
+		capability "Health Check"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Sensor"

 		fingerprint deviceId: "0x4007", inClusters: "0x98"
 		fingerprint deviceId: "0x4006", inClusters: "0x98"
+		fingerprint mfr:"014F", prod:"4744", model:"3030", deviceJoinName: "Linear GoControl Garage Door Opener"
 	}

 	simulator {
@@ -39,11 +41,11 @@ metadata {

 	tiles {
 		standardTile("toggle", "device.door", width: 2, height: 2) {
-			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
-			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
-			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
-			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffffff")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#00a0dc", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#e86d13", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#e86d13")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00a0dc")
 			
 		}
 		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
@@ -63,6 +65,11 @@ metadata {

 import physicalgraph.zwave.commands.barrieroperatorv1.*

+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description.startsWith("Err")) {
@@ -287,6 +294,13 @@ def close() {
 	secure(zwave.barrierOperatorV1.barrierOperatorSet(requestedBarrierState: BarrierOperatorSet.REQUESTED_BARRIER_STATE_CLOSE))
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	secure(zwave.barrierOperatorV1.barrierOperatorGet())
 }
--- a/devicetypes/smartthings/zwave-lock.src/.st-ignore
+++ b/devicetypes/smartthings/zwave-lock.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zwave-lock.src/README.md
+++ b/devicetypes/smartthings/zwave-lock.src/README.md
@@ -0,0 +1,45 @@
+# Z-Wave Switch
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Key Free Touchscreen Deadbolt (YRD240)](https://www.smartthings.com/works-with-smartthings/yale/yale-key-free-touchscreen-deadbolt-yrd240)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Battery** - defines device uses a battery
+* **Lock** - allows for the control of a lock device
+* **Lock Codes** - allows for the lock code control of a lock device
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Locks are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave/ZigBee Yale Lock Troubleshooting](https://support.smartthings.com/hc/en-us/articles/205138400-How-to-connect-Yale-locks)
+
+
--- a/devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy
+++ b/devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy
@@ -20,11 +20,13 @@ metadata {
 		capability "Sensor"
 		capability "Lock Codes"
 		capability "Battery"
+		capability "Health Check"

 		command "unlockwtimeout"

 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
 	}

 	simulator {
@@ -38,10 +40,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.lock", key: "PRIMARY_CONTROL") {
-				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
+				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC", nextState:"unlocking"
 				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
+				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
 				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 			}
 		}
@@ -67,6 +69,8 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*

 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -504,6 +508,13 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	def cmds = [secure(zwave.doorLockV1.doorLockOperationGet())]
 	if (state.assoc == zwaveHubNodeId) {
--- a/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
+++ b/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
@@ -22,10 +22,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Light"
+		capability "Health Check"

 		command "reset"

 		fingerprint inClusters: "0x25,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"0012", deviceJoinName: "Aeon Labs Micro Smart Switch 2E"
 	}

 	// simulator metadata
@@ -73,6 +75,8 @@ metadata {
 }

 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.MSR) {
 			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -179,6 +183,14 @@ def poll() {
 	])
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),
--- a/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
@@ -37,8 +37,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/zwave-siren.src/.st-ignore
+++ b/devicetypes/smartthings/zwave-siren.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zwave-siren.src/README.md
+++ b/devicetypes/smartthings/zwave-siren.src/README.md
@@ -0,0 +1,42 @@
+# Z-wave Siren
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Switch** - can detect state (possible values: on/off)
+
+## Device Health
+
+FortrezZ Siren Strobe Alarm is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)
--- a/devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy
+++ b/devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy
@@ -20,6 +20,7 @@ metadata {
 		capability "Actuator"
        capability "Alarm"
        capability "Battery"
+		capability "Health Check"
        capability "Polling"
        capability "Refresh"
        capability "Sensor"
@@ -27,6 +28,7 @@ metadata {


 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}

 	simulator {
@@ -58,6 +60,11 @@ metadata {
 	}
 }

+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -119,6 +126,13 @@ def both() {
 	on()
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()
--- a/devicetypes/smartthings/zwave-smoke-alarm.src/.st-ignore
+++ b/devicetypes/smartthings/zwave-smoke-alarm.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zwave-smoke-alarm.src/README.md
+++ b/devicetypes/smartthings/zwave-smoke-alarm.src/README.md
@@ -0,0 +1,40 @@
+# Z-wave Smoke Alarm
+
+Cloud Execution
+
+Works with: 
+
+* [First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)](https://www.smartthings.com/works-with-smartthings/sensors/first-alert-smoke-detector-and-carbon-monoxide-alarm-zcombo)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Smoke Detector** - measure smoke and optionally carbon monoxide levels
+* **Carbon Monoxide Detector** - measure carbon monoxide levels
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO) is a Z-wave sleepy device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+* __122min__ checkInterval
+
+## Battery Specification
+
+Two AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201581984-First-Alert-Smoke-Detector-and-Carbon-Monoxide-Alarm-ZCOMBO-)
--- a/devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy
+++ b/devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy
@@ -17,10 +17,12 @@ metadata {
 		capability "Carbon Monoxide Detector"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"

 		attribute "alarmState", "string"

 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}

 	simulator {
@@ -51,6 +53,11 @@ metadata {
 	}
 }

+def updated(){
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def results = []
 	if (description.startsWith("Err")) {
@@ -65,7 +72,6 @@ def parse(String description) {
 	return results
 }

-
 def createSmokeOrCOEvents(name, results) {
 	def text = null
 	switch (name) {
--- a/devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy
+++ b/devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy
@@ -20,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Polling"
 		capability "Sensor"
+		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"

@@ -30,6 +31,7 @@ metadata {

 		fingerprint deviceId: "0x08"
 		fingerprint inClusters: "0x43,0x40,0x44,0x31"
+		fingerprint mfr:"0039", prod:"0011", model:"0001", deviceJoinName: "Honeywell Z-Wave Thermostat"
 	}

 	// simulator metadata
@@ -123,6 +125,11 @@ metadata {
 	}
 }

+def updated(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def map = createEvent(zwaveEvent(zwave.parse(description, [0x42:1, 0x43:2, 0x31: 3])))
@@ -393,6 +400,14 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	poll()
+}
+
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
--- a/smartapps/smartthings/hue-connect.src/hue-connect.groovy
+++ b/smartapps/smartthings/hue-connect.src/hue-connect.groovy
@@ -472,8 +472,6 @@ def addBridge() {
 					log.error "Failed to create Hue Bridge device"
 				}
 			}
-		} else {
-			log.debug "found ${d.displayName} with id $selectedHue already exists"
 		}
 	}
 }
@@ -715,6 +713,9 @@ def doDeviceSync(){
 		log.warn "state.updating failed to clear"
 	}

+	if (selectedHue) {
+		addBridge()
+	}
 	convertBulbListToMap()
 	poll()
 	ssdpSubscribe()
@@ -1358,7 +1359,7 @@ private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 private colorPointsForModel(model = null) {
 	def result = null
 	switch (model) {
-		// Gamut A
+	// Gamut A
 		case "LLC001": /* Monet, Renoir, Mondriaan (gen II) */
 		case "LLC005": /* Bloom (gen II) */
 		case "LLC006": /* Iris (gen III) */
@@ -1370,12 +1371,12 @@ private colorPointsForModel(model = null) {
 		case "LLC010": /* Hue Living Colors Iris + */
 			result = [r:[x: 0.704f, y: 0.296f], g:[x: 0.2151f, y: 0.7106f], b:[x: 0.138f, y: 0.08f]];
 			break
-		// Gamut C
+	// Gamut C
 		case "LLC020": /* Hue Go */
 		case "LST002": /* Hue LightStrips Plus */
 			result = [r:[x: 0.692f, y: 0.308f], g:[x: 0.17f, y: 0.7f], b:[x: 0.153f, y: 0.048f]];
 			break
-		// Gamut B
+	// Gamut B
 		case "LCT001": /* Hue A19 */
 		case "LCT002": /* Hue BR30 */
 		case "LCT003": /* Hue GU10 */
@@ -1803,4 +1804,3 @@ def hsvToHex(hue, sat, value = 100){

 	return "#$r1$g1$b1"
 }
-
Author	SHA1	Message	Date
Jack Chi	78a509e8f5	Merge pull request #1555 from skt123/micro_smart_switch [CHF-493] Added Health Check Implementation for Micro Smart Switch 2E.	2017-03-22 10:06:11 -07:00
Ryan Applegate	42d31f29cc	Merge pull request #1820 from rappleg/FixSmartSenseMultiBackgroundColor DVCSMP-2533 Fix backgroundColor on SmartSense Multi	2017-03-22 11:28:03 -05:00
rappleg	9b4f6974de	DVCSMP-2533 Fix backgroundColor on SmartSense Multi	2017-03-22 11:21:04 -05:00
Sushant	ea5344f9c8	Merge branch 'master' into micro_smart_switch	2017-03-22 15:22:13 +05:30
sushant.k1	b5e1d652fd	[CHF-493] Added Health Check Implementation for Micro Smart Switch 2E.	2017-03-22 15:17:55 +05:30
Jack Chi	a03e8f20c5	Merge pull request #1537 from pchomal/zwave_thermostat [CHF-480] Health Check implementation for Z-Wave Thermostat	2017-03-21 18:01:13 -07:00
Vinay Rao	e0d307f6b5	Merge pull request #1808 from SmartThingsCommunity/staging Rolling down staging to master	2017-03-21 11:48:22 -07:00
Vinay Rao	0ec8cba885	Merge pull request #1806 from SmartThingsCommunity/production Rolling down production hotfix to staging	2017-03-21 11:37:04 -07:00
Jack Chi	bcfece27c4	Merge pull request #1789 from parijatdas/firstalert_smoke_alarm [CHF-544] Health Check Zwave Smoke Alarm	2017-03-20 19:13:07 -07:00
Parijat Das	26f9690190	Added health-check for First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)	2017-03-20 17:58:32 -07:00
Vinay Rao	eca8fda0f2	Merge pull request #1805 from larsfinander/revert_hue_i18_changes_staging Hue: Revert i18 changes	2017-03-20 16:35:29 -07:00
Lars Finander	ce07c065c8	Hue: Revert i18 changes	2017-03-20 17:31:05 -06:00
Jack Chi	640f9413c3	Merge pull request #1767 from parijatdas/fortrezz_siren_strobe_alarm [CHF-453] Health Check Zwave Siren	2017-03-20 16:05:18 -07:00
Jack Chi	1c52f80eae	Merge pull request #1769 from parijatdas/fortrezz_water_valve [CHF-539] Health Check FortrezZ Water Valve	2017-03-20 16:04:25 -07:00
Jack Chi	de4d52a28b	Merge pull request #1790 from parijatdas/zwave_garage_door_opener [CHF-540] Health Check Zwave-garage-door-opener	2017-03-20 16:01:39 -07:00
Jack Chi	6892965cf1	Merge pull request #1804 from parijatdas/aeon_gen5 [CHF-545] Health Check Aeon MultiSensor Gen5	2017-03-20 15:54:02 -07:00
Vinay Rao	17ec6270d6	Merge pull request #1803 from larsfinander/hue_translations_updated_staging Hue: Updated errors in text not matching i18 files	2017-03-20 15:46:15 -07:00
Lars Finander	d233a65ef5	Hue: Updated errors in text not matching i18 files	2017-03-20 16:44:10 -06:00
Jack Chi	b36a985d92	Merge pull request #1785 from pchomal/zwave_lock_hc [CHF-551] Health Check Z-Wave Lock	2017-03-20 15:05:24 -07:00
Parijat Das	8a3c9edf0a	Added health-check for Aeon Multisensor Gen5	2017-03-20 14:54:14 -07:00
Vinay Rao	a560c5b040	Merge pull request #1795 from larsfinander/hue_connect_translations_staging DVCSMP-2453 HUE: add code to enable localization for Service Manage	2017-03-20 11:42:26 -07:00
Vinay Rao	3ee374028f	Merge pull request #1801 from dkirker/DVCSMP-2504 DVCSMP-2504: Add fingerprints for Centrailte generic multi, motion, water leak	2017-03-20 09:45:18 -07:00
Donald Kirker	7ac7bd3034	DVCSMP-2504: Add fingerprints for Centrailte generic multi, motion, water leak	2017-03-20 07:39:37 -07:00
Zach Varberg	f734c5490b	Merge pull request #1793 from varzac/fix-open-close-temp-offset [DVCSMP-2516] Properly handle tempOffset in smartsense sensors	2017-03-17 08:56:17 -05:00
Lars Finander	b93a05d450	DVCSMP-2453 HUE: add code to enable localization for Service Manage -Updated strings in app -Added i18 files	2017-03-16 19:09:23 -06:00
Vinay Rao	f5186a41c7	Merge pull request #1787 from jackchi/dth_ux_page17 [DVCSMP-2512] Standardize Page 17 of DTH UX Improvements	2017-03-16 11:20:15 -07:00
Vinay Rao	c505f95e7a	Merge pull request #1788 from ShunmugaSundar/Page_18 [DVCSMP-2513] Standardize Page 18 of DTH UX Improvements	2017-03-16 11:20:07 -07:00
Vinay Rao	173c34150a	Merge pull request #1779 from jackchi/dth_ux_page16 [DVCSMP-2511] Standardize Page 16 of DTH UX Improvements	2017-03-16 11:19:59 -07:00
Vinay Rao	f6b850500e	Merge pull request #1780 from ShunmugaSundar/Page_14_Changes [DVCSMP-2509] Standardize Page 14 of DTH UX Improvements	2017-03-16 11:19:52 -07:00
Jack Chi	4dac7b5379	Merge pull request #1786 from skt123/aeon_siren [CHF-552] Implementation of Health Check for Aeon Siren.	2017-03-16 10:18:08 -07:00
Zach Varberg	a79d56e467	Properly handle tempOffset in smartsense sensors This was accidentally dropped as a part of the zigbee DTH cleanup that was done a while ago. This properly adjusts according to the offset. This resolves: https://smartthings.atlassian.net/browse/DVCSMP-2516	2017-03-16 09:30:52 -05:00
Vinay Rao	e2d8af48a8	Merge pull request #1792 from SmartThingsCommunity/revert-1784-revert-1783-hue_add_bridge_if_missing_production Revert "Revert "Hue: Re-add Hue bridge if deleted""	2017-03-16 04:37:53 -07:00
Vinay Rao	0f00c3c7c0	Revert "Revert "Hue: Re-add Hue bridge if deleted""	2017-03-16 04:37:35 -07:00
piyush.c	0a4d56be04	[CHF-551] Health Check Z-Wave Lock	2017-03-16 15:48:42 +05:30
sushant.k1	1326881142	Implemented of Health Check for Aeon Siren.	2017-03-16 15:24:53 +05:30
Parijat Das	d30494172f	Added health-check for Linear GoControl Garage Door Opener	2017-03-15 16:52:53 -07:00
ShunmugaSundar	2678480244	[DVCSMP-2513] Standardize Page 18 of DTH UX Improvements	2017-03-15 23:58:43 +05:30
jackchi	b5e8a46143	[DVCSMP-2512] Standardize Page 17 of DTH UX Improvements	2017-03-15 09:57:37 -07:00
Vinay Rao	6237dbd179	Merge pull request #1784 from SmartThingsCommunity/revert-1783-hue_add_bridge_if_missing_production Revert "Hue: Re-add Hue bridge if deleted"	2017-03-14 21:18:43 -07:00
Vinay Rao	65f5597ccc	Revert "Hue: Re-add Hue bridge if deleted"	2017-03-14 21:00:22 -07:00
Vinay Rao	fced2d7c61	Merge pull request #1783 from larsfinander/hue_add_bridge_if_missing_production Hue: Re-add Hue bridge if deleted	2017-03-14 18:42:40 -07:00
Lars Finander	74552420ba	Hue: Re-add Hue bridge if deleted -Add Hue Bridge if missing during deviceSync	2017-03-14 19:28:15 -06:00
ShunmugaSundar	6d0f9d101d	[DVCSMP-2509] Standardize Page 14 of DTH UX Improvements [DVCSMP-2509] Standardize Page 14 of DTH UX Improvements	2017-03-15 05:26:41 +05:30
jackchi	4ba55e7f0a	[DVCSMP-2511] Standardize Page 16 of DTH UX Improvements	2017-03-14 15:29:37 -07:00
Vinay Rao	79c254cfac	Merge pull request #1774 from SmartThingsCommunity/staging Rolling up staging to production	2017-03-14 11:40:39 -07:00
Parijat Das	7a7a08ea6e	Added health-check for FortrezZ Siren Strobe Alarm	2017-03-13 18:05:22 -07:00
Parijat Das	950a33dc74	Added health-check for FortrezZ Water Valve	2017-03-13 16:35:46 -07:00
piyush.c	648dee90b6	[CHF-480] Health Check implementation for Z-Wave Thermostat	2016-12-20 12:57:13 +05:30