Merge pull request #1903 from workingmonk/feature/zigbee_centralite_button

DVCSMP-2570 Adding centralite zigbee button fingerprint

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,13 +14,13 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
-        
+
         capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
@@ -28,26 +28,26 @@ metadata {
 	}
 
 	simulator {
-		
+
 	}
-    
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
             	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
                 attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
+			}
         }
-                
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -60,7 +60,7 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        
+
         main "FGK"
         details(["FGK","battery", "temperature"])
     }
@@ -68,9 +68,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"   
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -87,7 +87,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -125,13 +125,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
+    	switch (cmd.event) {
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-                
+
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -145,7 +145,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -153,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -166,7 +166,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -177,32 +177,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -221,7 +221,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
         map.name = "temperature"
         map.displayed = true
 	}
-	
+
     createEvent(map)
 }
 
@@ -231,9 +231,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+
     def cmds = []
-        
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -242,7 +242,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 
@@ -261,7 +261,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
+
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -269,4 +269,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/README.md

@@ -0,0 +1,41 @@
+# Fibaro Door Window Sensor ZW5
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor ZW5](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Tamper Alert** - detects tampers
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor ZW5 is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor ZW5 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,37 +14,38 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
+		capability "Health Check"
 
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
 	}
 
 	simulator {
-		
+
 	}
-        
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
             	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
                 attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
+			}
         }
-                
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         main "FGK"
         details(["FGK","battery"])
     }
@@ -52,9 +53,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"   
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -71,7 +72,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -109,13 +110,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
+    	switch (cmd.event) {
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-                
+
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -129,7 +130,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -137,7 +138,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -150,7 +151,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -159,32 +160,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -199,9 +200,11 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
     def cmds = []
-    
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -209,7 +212,7 @@ def configure() {
     cmds += zwave.batteryV1.batteryGet()
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 
@@ -228,7 +231,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
+
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -236,4 +239,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
@@ -34,16 +34,16 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
 			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
+				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
 			}
-			
+
 			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
+				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
 			}
 		}
-		
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -130,14 +130,14 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 	[event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
 	log.debug "manufacturerName: ${cmd.manufacturerName}"
 	log.debug "productId:        ${cmd.productId}"
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
 	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
 	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"
@@ -23,27 +23,27 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Health Check"
-        
+
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
-    
+
 	simulator {
-		
+
     }
-    
+
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
             	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
             }
-            
+
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}  
+			}
         }
-        
+
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -56,15 +56,15 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        
+
         valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
 			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
-        
+
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-        
+
         main "FGMS"
         details(["FGMS","battery","temperature","illuminance"])
     }
@@ -72,9 +72,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"        
+	log.debug "Parsing '${description}'"
     def result = []
-    
+
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -91,7 +91,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
+
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -159,13 +159,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                     map.descriptionText = "${device.displayName}: motion has stopped"
                 }
         		break
-                
+
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
                 map.descriptionText = "${device.displayName}: tamper alarm activated"
             	break
-                
+
             case 8:
                 map.name = "motion"
                 map.value = "active"
@@ -173,7 +173,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 break
         }
     }
-    
+
     createEvent(map)
 }
 
@@ -194,39 +194,39 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
     cmds << "delay 500"
     cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
     cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))
     cmds << "delay 1200"
     cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
     [event, response(cmds)]
-    
+
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
+
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-        
+
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-        
+
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -245,7 +245,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
     def cmds = []
-    
+
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -255,7 +255,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
+
     encapSequence(cmds, 500)
 }
 

devicetypes/keen-home/keen-home-smart-vent.src/README.md

@@ -0,0 +1,39 @@
+# Keen Home Smart Vent
+
+Cloud Execution
+
+Works with: 
+
+* [Keen Home Smart Vent](https://www.smartthings.com/works-with-smartthings/keen-home/keen-home-smart-vent)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Sensor** - detects sensor events
+* **Temperature Measurement** - represents capability to measure temperature
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Keen Home Smart Vent with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Keen Home Smart Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205302050-Keen-Home-Smart-Vent)

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,6 +11,7 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
+        capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -20,10 +21,7 @@ metadata {
         command "setZigBeeIdTile"
         command "clearObstruction"
 
-        fingerprint endpoint: "1",
-        profileId: "0104",
-        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
-        outClusters: "0019"
+        fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019"
     }
 
     // simulator metadata
@@ -466,15 +464,27 @@ def refresh() {
     getBattery()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def configure() {
     log.debug "CONFIGURE"
 
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()
 
     def configCmds = [
         // bind reporting clusters to hub
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
+            //commenting out switch cluster bind as using wrapper onOffConfig of zigbee class
+        //"zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
@@ -510,5 +520,5 @@ def configure() {
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
     ]
 
-    return configCmds + refresh()
+    return configCmds + zigbee.onOffConfig() + refresh()
 }

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -1,6 +1,5 @@
 /**
- *  Spruce Controller - Pre Release V2 10/11/2015
- *
+ *  Spruce Controller V2_4 Big Tiles *
  *  Copyright 2015 Plaid Systems
  *
  *	Author: NC
@@ -21,82 +20,96 @@
  */
 
 metadata {
-	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
-		capability "Switch"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Actuator"
-        capability "Valve"        
+	definition (name: 'Spruce Controller', namespace: 'plaidsystems', author: 'Plaid Systems') {
+		capability 'Switch'
+        capability 'Configuration'
+        capability 'Refresh'
+        capability 'Actuator'
+        capability 'Valve'        
 		
-        attribute "switch", "string"
-        attribute "switch1", "string"
-		attribute "switch2", "string"
-		attribute "switch8", "string"
-		attribute "switch5", "string"
-		attribute "switch3", "string"
-		attribute "switch4", "string"
-		attribute "switch6", "string"
-		attribute "switch7", "string"
-        attribute "switch9", "string"
-		attribute "switch10", "string"
-		attribute "switch11", "string"
-		attribute "switch12", "string"
-		attribute "switch13", "string"
-		attribute "switch14", "string"
-		attribute "switch15", "string"
-        attribute "switch16", "string"
-		attribute "status", "string"        
+        attribute 'switch', 'string'
+        attribute 'switch1', 'string'
+		attribute 'switch2', 'string'
+		attribute 'switch8', 'string'
+		attribute 'switch5', 'string'
+		attribute 'switch3', 'string'
+		attribute 'switch4', 'string'
+		attribute 'switch6', 'string'
+		attribute 'switch7', 'string'
+        attribute 'switch9', 'string'
+		attribute 'switch10', 'string'
+		attribute 'switch11', 'string'
+		attribute 'switch12', 'string'
+		attribute 'switch13', 'string'
+		attribute 'switch14', 'string'
+		attribute 'switch15', 'string'
+        attribute 'switch16', 'string'
+		attribute 'rainsensor', 'string'
+        attribute 'status', 'string'
+        attribute 'tileMessage', 'string'
+        attribute 'minutes', 'string'
+        attribute 'VALUE_UP', 'string'
+        attribute 'VALUE_DOWN', 'string'        
         
-        command "programOn"
-        command "programOff"
-        command "on"
-        command "off"
-        command "z1on"
-		command "z1off"
-		command "z2on"
-		command "z2off"        
-		command "z3on"
-		command "z3off"
-		command "z4on"
-		command "z4off"
-		command "z5on"
-		command "z5off"
-		command "z6on"
-		command "z6off"
-		command "z7on"
-		command "z7off"
-		command "z8on"
-		command "z8off"
-        command "z9on"
-        command "z9off"
-		command "z10on"
-		command "z10off"
-		command "z11on"
-		command "z11off"
-		command "z12on"
-		command "z12off"
-		command "z13on"
-		command "z13off"
-		command "z14on"
-		command "z14off"
-		command "z15on"
-		command "z15off"
-		command "z16on"
-		command "z16off"
-        command "offtime"
+        command 'levelUp'
+        command 'levelDown'
+        command 'programOn'
+        command 'programOff'
+        command 'programWait'
+        command 'programEnd'
         
-        command "refresh"        
-        command "rain"
-        command "manual"
-        command "setDisplay"
+        command 'on'
+        command 'off'
+        command 'zon'
+        command 'zoff'
+        command 'z1on'
+		command 'z1off'
+		command 'z2on'
+		command 'z2off'        
+		command 'z3on'
+		command 'z3off'
+		command 'z4on'
+		command 'z4off'
+		command 'z5on'
+		command 'z5off'
+		command 'z6on'
+		command 'z6off'
+		command 'z7on'
+		command 'z7off'
+		command 'z8on'
+		command 'z8off'
+        command 'z9on'
+        command 'z9off'
+		command 'z10on'
+		command 'z10off'
+		command 'z11on'
+		command 'z11off'
+		command 'z12on'
+		command 'z12off'
+		command 'z13on'
+		command 'z13off'
+		command 'z14on'
+		command 'z14off'
+		command 'z15on'
+		command 'z15off'
+		command 'z16on'
+		command 'z16off'
         
-        command "settingsMap"
-        command "writeTime"
-        command "writeType"        
-        command "notify"
-        command "updated"
-
-		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
+        command 'config'
+        command 'refresh'        
+        command 'rain'
+        command 'manual'
+        command 'manualTime'
+        command 'settingsMap'
+        command 'writeTime'
+        command 'writeType'        
+        command 'notify'
+        command 'updated'      
+        
+		//ST release
+		//fingerprint endpointId: '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18', profileId: '0104', deviceId: '0002', deviceVersion: '00', inClusters: '0000,0003,0004,0005,0006,000F', outClusters: '0003, 0019', manufacturer: 'PLAID SYSTEMS', model: 'PS-SPRZ16-01'
+		//new release
+        fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,0009,000A,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
 		
 	}
 
@@ -104,162 +117,230 @@ metadata {
 	simulator {
 		// status messages
 		
-		// reply messages
-		
+		// reply messages		
 	}
+    
     preferences {
-    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
-    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
-    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
-	}
+    input description: 'If you have a rain sensor wired to the rain sensor input on the Spruce controller, turn it on here.', displayDuringSetup: true, type: 'paragraph', element: 'paragraph', title: 'Rain Sensor'
+    input description: 'The SYNC SETTINGS button must be pressed after making a change to the Rain sensor:', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''     
+    input 'RainEnable', 'bool', title: 'Rain Sensor Attached?', required: false, displayDuringSetup: true
+    input description: 'Adjust manual water time with arrows on main tile.  The time indicated in the first small tile indicates the time the zone will water when manually switched on.', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''
+    }
 
 	// UI tile definitions
 	tiles {
     
-    	standardTile("status", "device.status") {            
-            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
-            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
-            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
-            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
-            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
-            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#00A0DC"
-            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
-            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
-            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
-            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#cccccc"
-            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
-            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
+    	multiAttributeTile(name:"switchall", type:"generic", width:6, height:4) {        
+            tileAttribute('device.status', key: 'PRIMARY_CONTROL') {
+            attributeState 'schedule', label: 'Ready', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top.png'
+            attributeState 'finished', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#46c2e8'
+            attributeState 'raintoday', label: 'Rain Today', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'rainy', label: 'Rain', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'raintom', label: 'Rain Tomorrow', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'donewweek', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#00A0DC'
+            attributeState 'skipping', label: 'Skip', icon: 'st.Outdoor.outdoor20', backgroundColor: '#46c2e8'
+            attributeState 'moisture', label: 'Ready', icon: 'st.Weather.weather2', backgroundColor: '#46c2e8'
+            attributeState 'pause', label: 'PAUSE', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+			attributeState 'delayed', label: 'Delayed', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+            attributeState 'active', label: 'Active', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+            attributeState 'season', label: 'Adjust', icon: 'st.Outdoor.outdoor17', backgroundColor: '#ffb900'
+            attributeState 'disable', label: 'Off', icon: 'st.secondary.off', backgroundColor: '#cccccc'
+            attributeState 'warning', label: 'Warning', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top_yellow.png'
+            attributeState 'alarm', label: 'Alarm', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_s_red.png', backgroundColor: '#e66565'
+            }
+            
+            tileAttribute("device.minutes", key: "VALUE_CONTROL") {
+                attributeState "VALUE_UP", action: "levelUp"
+                attributeState "VALUE_DOWN", action: "levelDown"
+            }
+            
+            tileAttribute("device.tileMessage", key: "SECONDARY_CONTROL") {
+                attributeState "tileMessage", label: '${currentValue}'     
+            }            
+            
         }
-		standardTile("switch", "device.switch") {			
-			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
-            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-		}
-        standardTile("rainsensor", "device.rainsensor") {			
-			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
-            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
-		}    	
-        standardTile("switch1", "device.switch1") {			
-			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch2", "device.switch2") {            
-            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        valueTile('minutes', 'device.minutes'){
+        	state 'minutes', label: '${currentValue} min'
+        }
+        valueTile('dummy', 'device.minutes'){
+        	state 'minutes', label: ''
+        }
+		standardTile('switch', 'device.switch', width:2, height:2) {
+            state 'off', label: 'Start', action: 'programOn', icon: 'st.Outdoor.outdoor12', backgroundColor: '#a9a9a9'
+            state 'programOn', label: 'Wait', action: 'programOff', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'programWait', label: 'Wait', action: 'programEnd', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'on', label: 'Running', action: 'programEnd', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
 		}        
-        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
-			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile("rainsensor", "device.rainsensor", decoration: 'flat') {			
+			state "rainSensoroff", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
+            state "rainSensoron", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on_blue_small.png'
+            state "disable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_x_small.png'
+            state "enable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
 		}
-        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
-            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch1', 'device.switch1', inactiveLabel: false) {			
+			state 'z1off', label: '1', action: 'z1on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z1on', label: '1', action: 'z1off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
-            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
-            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
-            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
-            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
-			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
-            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch2', 'device.switch2', inactiveLabel: false) {            
+            state 'z2off', label: '2', action: 'z2on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z2on', label: '2', action: 'z2off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}        
-        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
-			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch3', 'device.switch3', inactiveLabel: false) {			
+			state 'z3off', label: '3', action: 'z3on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z3on', label: '3', action: 'z3off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
-            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch4', 'device.switch4', inactiveLabel: false) {            
+            state 'z4off', label: '4', action: 'z4on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z4on', label: '4', action: 'z4off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
-            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch5', 'device.switch5', inactiveLabel: false) {            
+            state 'z5off', label: '5', action: 'z5on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z5on', label: '5', action: 'z5off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
-            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+		standardTile('switch6', 'device.switch6', inactiveLabel: false) {            
+            state 'z6off', label: '6', action: 'z6on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z6on', label: '6', action: 'z6off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}
-        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
-            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch7', 'device.switch7', inactiveLabel: false) {            
+            state 'z7off', label: '7', action: 'z7on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z7on', label: '7', action: 'z7off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch8', 'device.switch8', inactiveLabel: false) {            
+            state 'z8off', label: '8', action: 'z8on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z8on', label: '8', action: 'z8off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch9', 'device.switch9', inactiveLabel: false) {			
+			state 'z9off', label: '9', action: 'z9on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z9on', label: '9', action: 'z9off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch10', 'device.switch10', inactiveLabel: false) {            
+            state 'z10off', label: '10', action: 'z10on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z10on', label: '10', action: 'z10off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}        
+        standardTile('switch11', 'device.switch11', inactiveLabel: false) {			
+			state 'z11off', label: '11', action: 'z11on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z11on', label: '11', action: 'z11off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch12', 'device.switch12', inactiveLabel: false) {            
+            state 'z12off', label: '12', action: 'z12on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z12on', label: '12', action: 'z12off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch13', 'device.switch13', inactiveLabel: false) {            
+            state 'z13off', label: '13', action: 'z13on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z13on', label: '13', action: 'z13off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch14', 'device.switch14', inactiveLabel: false) {            
+            state 'z14off', label: '14', action: 'z14on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z14on', label: '14', action: 'z14off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch15', 'device.switch15', inactiveLabel: false) {            
+            state 'z15off', label: '15', action: 'z15on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z15on', label: '15', action: 'z15off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}		
-        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
-            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+        standardTile('switch16', 'device.switch16', inactiveLabel: false) {            
+            state 'z16off',  label: '16', action: 'z16on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z16on',  label: '16', action: 'z16off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}        
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", action: "refresh", icon:"st.secondary.refresh"            
+        standardTile('refresh', 'device.switch', inactiveLabel: false, decoration: 'flat') {
+			state 'default', action: 'refresh', icon:'st.secondary.refresh'//-icon'            
 		}
-        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}		
+        standardTile('configure', 'device.configure', inactiveLabel: false, decoration: 'flat') {
+			state 'configure', label:'', action:'configuration.configure', icon:'http://www.plaidsystems.com/smartthings/st_syncsettings.png'//sync_icon_small.png'
+		}        
 		
-        main (["status"])        
-        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
-    }    
+        main (['switchall'])        
+        details(['switchall','minutes','rainsensor','switch1','switch2','switch3','switch4','switch','switch5','switch6','switch7','switch8','switch9','switch10','switch11','switch12','refresh','configure','switch13','switch14','switch15','switch16'])		
+    }       
 }
 
+//used for schedule 
 def programOn(){
-    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Program turned on')    
+    }
+
+def programWait(){    
+    sendEvent(name: 'switch', value: 'programWait', descriptionText: "Initializing Schedule")
+    }
+
+def programEnd(){
+	//sets switch to off and tells schedule switch is off/schedule complete with manaual
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program manually turned off')
+    zoff() 
     }
     
 def programOff(){    
-    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program turned off')
     off()
     }
-    
-def updated(){
-	log.debug "updated"    
+
+//set minutes
+def levelUp(){
+	def newvalue = 1
+    if (device.latestValue('minutes') != null) newvalue = device.latestValue('minutes').toInteger()+1
+    if (newvalue >= 60) newvalue = 60
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)    
+}
+
+def levelDown(){
+	def newvalue = device.latestValue('minutes').toInteger()-1
+    if (newvalue <= 0) newvalue = 1
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {	
-	//log.debug "Parse description $description"
+	log.debug "Parse description ${description}"
     def result = null
     def map = [:]
-	if (description?.startsWith("read attr -")) {
+	if (description?.startsWith('read attr -')) {
 		def descMap = parseDescriptionAsMap(description)
 		//log.debug "Desc Map: $descMap"
         //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
-		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
-			log.debug "Zone"
+		if (descMap.cluster == '000F' && descMap.attrId == '0055') {
+			log.debug 'Zone'
             map = getZone(descMap)            
 		}
-        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
-			log.debug "Alarm"            
+        else if (descMap.cluster == '0009' && descMap.attrId == '0000') {
+			log.debug 'Alarm'
             map = getAlarm(descMap)
             }
-	}     
-	
-	if (map) {
-		result = createEvent(map)
 	}
-	log.debug "Parse returned $map $result"
+    else if (description?.startsWith('catchall: 0104 0009')){
+    	log.debug 'Sync settings to controller complete'
+        if (device.latestValue('status') != 'alarm'){
+        	def configEvt = createEvent(name: 'status', value: 'schedule', descriptionText: "Sync settings to controller complete")
+            def configMsg = createEvent(name: 'tileMessage', value: 'Sync settings to controller complete', descriptionText: "Sync settings to controller complete", displayed: false)
+        	result = [configEvt, configMsg]
+            }
+        return result
+    }
+  
+    if (map) {
+    	result = createEvent(map)
+    	//configure after reboot
+        if (map.value == 'warning' || map.value == 'alarm'){
+            def cmds = config()       
+            def alarmEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) } + createEvent(map) + alarmEvt           
+			return result
+		}
+        else if (map.name == 'rainsensor'){
+        	def rainEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+        	result = [createEvent(map), rainEvt]
+            return result
+        }
+	}
+	if (map) log.debug "Parse returned ${map} ${result}"
 	return result
 }
 
 def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
+	(description - 'read attr - ').split(',').inject([:]) { map, param ->
+		def nameAndValue = param.split(':')
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 }
@@ -270,27 +351,28 @@ def getZone(descMap){
     def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
     
     String onoff
-    if(descMap.value == "00"){
-    	onoff = "off"        
+    if(descMap.value == '00'){
+    	onoff = 'off'        
     }    
-    else onoff = "on"
+    else onoff = 'on'
             
     if (EP == 1){
-    	map.name = "switch"
+    	map.name = 'switch'
         map.value = onoff
-        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
+        map.descriptionText = "${device.displayName} turned sprinkler program ${onoff}"
         }
         
     else if (EP == 18) {
-        map.name = "rainsensor"
-    	map.value = "rainSensor" + onoff
-        map.descriptionText = "${device.displayName} rain sensor is $onoff"
+        map.name = 'rainsensor'
+    	log.debug "Rain enable: ${RainEnable}, sensor: ${onoff}"
+        map.value = 'rainSensor' + onoff
+        map.descriptionText = "${device.displayName} rain sensor is ${onoff}"
         }
    	else {
         EP -= 1
-        map.name = "switch" + EP
-    	map.value = "z" + EP + onoff
-    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
+        map.name = 'switch' + EP
+    	map.value = 'z' + EP + onoff
+    	map.descriptionText = "${device.displayName} turned Zone $EP ${onoff}"
     	}
         
     map.isStateChange = true 
@@ -300,37 +382,59 @@ def getZone(descMap){
 
 def getAlarm(descMap){
 	def map = [:]
-    map.name = "status"
+    map.name = 'status'
     def alarmID = Integer.parseInt(descMap.value.trim(), 16)
     log.debug "${alarmID}"
-    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
-    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
-	map.value = "alarm"
-    map.isStateChange = true
+    map.value = 'alarm'
     map.displayed = true
+    map.isStateChange = true
+    if(alarmID <= 0){
+    	map.descriptionText = "${device.displayName} reboot, no other alarms"
+        map.value = 'warning'
+        //map.isStateChange = false
+        }
+    else map.descriptionText = "${device.displayName} reboot, reported zone ${alarmID - 1} error, please check zone is working correctly, press SYNC SETTINGS button to clear"
+       
     return map        
 }
 
 //status notify and change status
-def notify(value, text){	
-	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
+def notify(String val, String txt){
+	sendEvent(name: 'status', value: val, descriptionText: txt, isStateChange: true, display: false)
+    
+    //String txtShort = txt.take(100)
+    sendEvent(name: 'tileMessage', value: txt, descriptionText: "", isStateChange: true, display: false)
+}
 
+def updated(){
+	log.debug "updated"
+    
 }
 
 //prefrences - rain sensor, manual time
 def rain() {
-    log.debug "Rain $RainEnable"
+    log.debug "Rain sensor: ${RainEnable}"
+    if (RainEnable) sendEvent(name: 'rainsensor', value: 'enable', descriptionText: "${device.displayName} rain sensor is enabled", isStateChange: true)
+    else sendEvent(name: 'rainsensor', value: 'disable', descriptionText: "${device.displayName} rain sensor is disabled", isStateChange: true)
+    
     if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
     else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
 }
-def manual(){
-	log.debug "Time $ManualTime"
-    def mTime = 10
-    if (ManualTime) mTime = ManualTime
-    def manualTime = hex(mTime)
-    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"
+
+def manualTime(value){	
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
+}
+
+def manual(){    
+    def newManaul = 10    
+    if (device.latestValue('minutes')) newManaul = device.latestValue('minutes').toInteger()    
+    log.debug "Manual Zone runtime ${newManaul} mins"    
+    def manualTime = hex(newManaul)  
     
-    }
+    def sendCmds = []
+    sendCmds.push("st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}")
+    return sendCmds
+}
 
 //write switch time settings map
 def settingsMap(WriteTimes, attrType){
@@ -366,13 +470,20 @@ def writeTime(wEP, runTime){
 
 //set reporting and binding
 def configure() {
+	
+    sendEvent(name: 'status', value: 'schedule', descriptionText: "Syncing settings to controller")
+    sendEvent(name: 'minutes', value: "10", descriptionText: "Manual Time set to 10 mins", display: false)
+    sendEvent(name: 'tileMessage', value: 'Syncing settings to controller', descriptionText: 'Syncing settings to controller')
+    config()    
+}
+
+def config(){
 
 	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
-	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+	log.debug "Configuring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
     
     def configCmds = [	
-        //program on/off
+        //program on/off        
         "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x09 {${device.zigbeeId}} {}", "delay 1000",        
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
@@ -458,38 +569,16 @@ def configure() {
         "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
         "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + rain() + manual()
+    return configCmds + rain()
 }
 
-
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}    
-
 def refresh() {
 
-	log.debug "refresh"
-    def refreshCmds = [
-	        
+	log.debug "refresh pressed"
+    sendEvent(name: 'tileMessage', value: 'Refresh', descriptionText: 'Refresh')
+        
+    def refreshCmds = [	    
+        
         "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
         
         "st rattr 0x${device.deviceNetworkId} 2 0x0F 0x55", "delay 500",
@@ -513,64 +602,96 @@ def refresh() {
         "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
  	
     ]
-    return refreshCmds + rain() + manual()
+    
+    return refreshCmds
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+//on & off redefined for Alexa to start manual schedule
+def on() {    
+    log.debug 'Alexa on'
+    //schedule subscribes to programOn
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Alexa turned program on')           
+}
+def off() {
+	log.debug 'Alexa off'
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Alexa turned program off')
+    zoff()        
 }
 
 // Commands to device
 //zones on - 8
-def on() {
-    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
-    log.debug "on"
-    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"    
+def zon() {
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
-def off() {
-    log.debug "off"
-    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"    
+def zoff() {
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}" 
 }
 def z1on() {	
-    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
+    return manual() + "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"    
 }
 def z1off() {    
     "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
 }
 def z2on() {	
-    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
 }
 def z2off() {    
     "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
 }
 def z3on() {        
-    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
 }
 def z3off() {	
     "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
 }
 def z4on() {	
-    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
 }
 def z4off() {    
     "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
 }
 def z5on() {	
-	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
 }
 def z5off() {
 	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
 }
 def z6on() {
-	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
 }
 def z6off() {
     "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
 }
 def z7on() {
-	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
 }
 def z7off() {
 	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
 }
 def z8on() {
-	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
 }
 def z8off() {
 	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
@@ -578,50 +699,51 @@ def z8off() {
 
 //zones 9 - 16
 def z9on() {	
-    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
 }
 def z9off() {	    
     "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
 }
 def z10on() {	
-    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
 }
 def z10off() {    
     "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
 }
 def z11on() {        
-    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
 }
 def z11off() {	
     "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
 }
 def z12on() {	
-    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
 }
 def z12off() {    
     "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
 }
 def z13on() {	
-	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
 }
 def z13off() {
 	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
 }
 def z14on() {
-	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
 }
 def z14off() {
     "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
 }
 def z15on() {
-	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
 }
 def z15off() {
 	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
 }
 def z16on() {
-	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
 }
 def z16off() {
 	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
-}
+}
+

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,6 +100,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,6 +58,11 @@ metadata {
  }
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -28,6 +28,8 @@ metadata {
         capability "Refresh"
         capability "Music Player"
         capability "Health Check"
+        capability "Sensor"
+        capability "Actuator"
 
         /**
          * Define all commands, ie, if you have a custom action not

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"
@@ -84,6 +84,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -32,7 +32,7 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
+		attribute "displayThermostatSetpoint", "string" // Added to be able to show "Auto"/"Off" keeping attribute thermostatSetpoint a number
 		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
@@ -43,8 +43,8 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
+		standardTile("temperature", "device.temperature", width: 2, height: 2, decoration: "flat") {
+			state("temperature", label:'${currentValue}°', unit:"F", icon: "st.thermostat.ac.air-conditioning",
 					backgroundColors:[
 							// Celsius
 							[value: 0, color: "#153591"],
@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -81,8 +81,8 @@ metadata {
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("displayThermostatSetpoint", "device.displayThermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "displayThermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
@@ -113,7 +113,7 @@ metadata {
 			state "humidity", label:'${currentValue}%'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "displayThermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}
 
 	preferences {
@@ -185,6 +185,11 @@ def generateEvent(Map results) {
 				isChange = isStateChange(device, name, value.toString())
 				event['isStateChange'] = isChange
 				event['displayed'] = false
+			} else if (name == "thermostatMode") {
+				def mode = value.toString()
+				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				isChange = isStateChange(device, name, mode)
+				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -452,10 +457,10 @@ def emergencyHeat() {
 }
 
 def auxHeatOnly() {
-	log.debug "auxHeatOnly"
+	log.debug "auxHeatOnly = emergency heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxHeatOnly")
+		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -574,17 +579,23 @@ def generateSetpointEvent() {
 	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
+	def averageSetpoint = roundC((heatingSetpoint + coolingSetpoint) / 2)
 	if (mode == "heat") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 	else if (mode == "cool") {
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale, displayed: false)
 	} else if (mode == "auto") {
-		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Auto", displayed: false)
 	} else if (mode == "off") {
-		sendEvent("name":"thermostatSetpoint", "value":"Off")
-	} else if (mode == "auxHeatOnly") {
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 }
 
@@ -621,13 +632,14 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -666,13 +678,14 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -706,7 +719,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
+		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -735,15 +748,18 @@ void alterSetpoint(temp) {
 
 		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "displayThermostatSetpoint", "value": temp.value, displayed: false)
 			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
 			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
+			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			}
 		}
 
@@ -759,6 +775,7 @@ def generateStatusEvent() {
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
 	def statusText
+	def operatingState = "idle"
 
 	log.debug "Generate Status Event for Mode = ${mode}"
 	log.debug "Temperature = ${temperature}"
@@ -767,20 +784,29 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-		if (temperature >= heatingSetpoint)
+		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+			operatingState = "heating"
+		}
 	} else if (mode == "cool") {
-		if (temperature <= coolingSetpoint)
+		if (temperature <= coolingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
+			operatingState = "cooling"
+		}
 	} else if (mode == "auto") {
 		statusText = "Right Now: Auto"
+		if (temperature < heatingSetpoint) {
+			operatingState = "heating"
+		} else if (temperature > coolingSetpoint) {
+			operatingState = "cooling"
+		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
@@ -788,6 +814,7 @@ def generateStatusEvent() {
 
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
+	sendEvent("name":"thermostatOperatingState", "value":operatingState, "description":operatingState, displayed: false)
 }
 
 def generateActivityFeedsEvent(notificationMessage) {

devicetypes/smartthings/econet-vent.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/econet-vent.src/README.md

@@ -1,10 +1,10 @@
-# Z-wave Siren
+# EcoNet Vent
 
 Cloud Execution
 
 Works with: 
 
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+* [EcoNet Controls Z-Wave Vent](https://www.smartthings.com/works-with-smartthings/econet-controls/econet-controls-z-wave-vent)
 
 ## Table of contents
 
@@ -14,18 +14,19 @@ Works with:
 
 ## Capabilities
 
+* **Switch Level** - allows for the control of the level attribute of a light
 * **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
+* **Switch** - allows for the control of a switch device
+* **Battery** - defines that the device has a battery
 * **Refresh** - _refresh()_ command for status updates
 * **Sensor** - detects sensor events
-* **Switch** - can detect state (possible values: on/off)
+* **Polling** - allows for the polling of devices that support it
+* **Configuration** - allow configuration of devices that support it
+* **Health Check** - indicates ability to get device health notifications
 
 ## Device Health
 
-FortrezZ Siren Strobe Alarm is polled by the hub.
+EcoNet Controls Z-Wave Vent is polled by the hub.
 As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
 Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
 Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
@@ -39,4 +40,4 @@ it is not polled for 5 minutes by the hub. This can delay up the process of bein
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)
+* [EcoNet Controls Z-Wave Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204556420-EcoNet-EV100-Vent)

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,11 +26,13 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
+		capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
+		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -83,8 +85,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 
@@ -169,6 +178,13 @@ def setLevel(value, duration) {
 	setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/everspring-flood-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/everspring-flood-sensor.src/README.md

@@ -0,0 +1,40 @@
+# Everspring Flood Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Everspring Water Detector](https://www.smartthings.com/works-with-smartthings/sensors/everspring-water-detector)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Everspring Water Detector is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+Three AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Everspring Water Detector Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088304-Everspring-Water-Detector)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,11 +12,12 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0xA102", inClusters: "0x86,0x72,0x85,0x84,0x80,0x70,0x9C,0x20,0x71"
 	}
@@ -28,7 +29,7 @@ metadata {
 			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage()
 		}
 	}
-	
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -138,6 +139,8 @@ def zwaveEvent(physicalgraph.zwave.Command cmd)
 
 def configure()
 {
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	if (!device.currentState("battery")) {
 		sendEvent(name: "battery", value:100, unit:"%", descriptionText:"(Default battery event)", displayed:false)
 	}

devicetypes/smartthings/fibaro-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/fibaro-door-window-sensor.src/README.md

@@ -0,0 +1,40 @@
+# Fibaro Door Window Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -39,7 +39,8 @@
 		capability 	"Contact Sensor"
 		capability 	"Sensor"
 		capability 	"Battery"
-        capability 	"Configuration"
+		capability 	"Configuration"
+		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -266,6 +267,9 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
  */
 def configure() {
 	log.debug "Configuring Device..."
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	def cmds = []
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], parameterNumber: 1, size: 2).format()
 	// send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -29,7 +29,7 @@
  * 2.	20150125	Todd Wackford
  *		Leaned out parse and moved most device info getting into configuration method.
  */
- 
+
  /**
  * Sets up metadata, simulator info and tile definition.
  *
@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -47,7 +47,7 @@
 		capability 	"Sensor"
 		capability 	"Battery"
 		capability  "Health Check"
-        
+
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
         command		"updateZwaveParam"
@@ -110,7 +110,7 @@
 			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
-        
+
 
 		main(["motion", "temperature", "acceleration", "illuminance"])
 		details(["motion", "temperature", "acceleration", "battery", "illuminance", "configure"])
@@ -130,18 +130,18 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
     def cmds = []
-    
+
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// turn on tamper sensor with active/inactive reports (use it as an acceleration sensor) default is 0, or off
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [4], parameterNumber: 24, size: 1).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 24).format()
-        
+
     // temperature change report threshold (0-255 = 0.1 to 25.5C) default is 1.0 Celcius, setting to .5 Celcius
     cmds << zwave.configurationV1.configurationSet(configurationValue: [5], parameterNumber: 60, size: 1).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format() 
-    
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format()
+
     cmds << response(zwave.batteryV1.batteryGet())
     cmds << response(zwave.versionV1.versionGet().format())
     cmds << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -155,20 +155,20 @@ def parse(String description)
 {
 	def result = []
 	def cmd = zwave.parse(description, [0x72: 2, 0x31: 2, 0x30: 1, 0x84: 1, 0x9C: 1, 0x70: 2, 0x80: 1, 0x86: 1, 0x7A: 1, 0x56: 1])
-    
+
     if (description == "updated") {
         result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 7200, nodeid:zwaveHubNodeId))
-		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())            
+		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 	}
-    
+
 	if (cmd) {
-		if( cmd.CMD == "8407" ) { 
+		if( cmd.CMD == "8407" ) {
             result << response(zwave.batteryV1.batteryGet().format())
-        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format()) 
+        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
         }
 		result << createEvent(zwaveEvent(cmd))
 	}
-    
+
     if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
@@ -189,14 +189,14 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 	}
 }
 
-def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) {
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -205,7 +205,7 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
@@ -304,7 +304,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
     updateDataValue("MSR", msr)
-    
+
     if ( msr == "010F-0800-2001" ) { //this is the msr and device type for the fibaro motion sensor
     	configure()
     }
@@ -334,7 +334,7 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {   
+	if ( params ) {
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -344,7 +344,7 @@ def updateZwaveParam(params) {
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)        
+        delayBetween(cmds, 1000)
     }
 }
 
@@ -388,13 +388,13 @@ def resetParams2StDefaults() {
     cmds << zwave.configurationV1.configurationSet(configurationValue: [18], parameterNumber: 86, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [28], parameterNumber: 87, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 89, size: 1).format()
-    
+
     delayBetween(cmds, 500)
 }
 
  /**
- * Lists all of available Fibaro parameters and thier current settings out to the 
- * logging window in the IDE This will be called from the "Fibaro Tweaker" or 
+ * Lists all of available Fibaro parameters and thier current settings out to the
+ * logging window in the IDE This will be called from the "Fibaro Tweaker" or
  * user's own app.
  *
  * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
@@ -433,7 +433,6 @@ def listCurrentParams() {
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 86).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 87).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 89).format()
-    
+
 	delayBetween(cmds, 500)
 }
-

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,6 +50,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,10 +57,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,10 +45,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,10 +66,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,10 +50,19 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,10 +55,20 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -190,7 +200,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -119,7 +129,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -7,6 +8,7 @@ metadata {
 	definition (name: "Logitech Harmony Hub C2C", namespace: "smartthings", author: "SmartThings") {
 		capability "Media Controller"
         capability "Refresh"
+		capability "Health Check"
         
         command "activityoff"   
         command "alloff" 
@@ -38,6 +40,20 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
+def installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 def startActivity(String activityId) {
 	log.debug "Executing 'Start Activity'"
 	log.trace parent.activity("$device.deviceNetworkId-$activityId","start")    
@@ -58,6 +74,10 @@ def poll() {
 	log.trace parent.poll()
 }
 
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "Executing 'Refresh'"
 	log.trace parent.poll()

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 
@@ -44,7 +44,7 @@ def parse(String description) {
 	if (description.startsWith("zone")) {
 		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
 	}
-	
+
 	log.debug "Parse returned $resMap"
 	return resMap
 }

devicetypes/smartthings/plant-link.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/plant-link.src/README.md

@@ -0,0 +1,35 @@
+# Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Relative Humidity Measurement** - allows reading the relative humidity from devices that support it
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a Z-wave sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)

devicetypes/smartthings/plant-link.src/plant-link.groovy

@@ -21,8 +21,10 @@ metadata {
 		capability "Relative Humidity Measurement"
 		capability "Battery"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0405,FC08", outClusters: "0003"
+		fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0B04", outClusters: "0003", manufacturer: "", model: "", deviceJoinName: "OSO Technologies PlantLink Soil Moisture Sensor"
 	}
 
 	tiles {
@@ -48,6 +50,11 @@ metadata {
 	}
 }
 
+def updated() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description) {
 	log.debug "Parse description $description"

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -16,7 +16,7 @@
  *	Date: 2013-12-04
  */
 metadata {
-	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Power Meter"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -15,7 +15,7 @@
  */
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"

devicetypes/smartthings/smartsense-moisture.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-moisture.src/README.md

@@ -0,0 +1,36 @@
+# Smartsense Moisture
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Moisture Sensor](https://www.smartthings.com/works-with-smartthings/fortrezz/fortrezz-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Temperature Measurement** - represents capability to measure temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Smartsense Moisture is a Z-wave sleepy device type and checks in every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [FortrezZ Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200930740-FortrezZ-Moisture-Sensor)

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -17,9 +17,11 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
         capability "Temperature Measurement"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
+		fingerprint mfr:"0084", prod:"0063", model:"010C", deviceJoinName: "FortrezZ Moisture Sensor"
 	}
 
 	simulator {
@@ -89,6 +91,16 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 {
 	[descriptionText: "${device.displayName} woke up", isStateChange: false]

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -52,7 +52,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"##e86d13"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
 				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -135,10 +135,7 @@ def refresh() {
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
 			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
 			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 }
 
 def configure() {
@@ -150,5 +147,10 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() +
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0x104E]) +   // New firmware
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300)
+
 }

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -23,6 +23,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -20,6 +20,7 @@ metadata {
 	definition(name: "Wattvision", namespace: "smartthings", author: "Steve Vlaminck") {
 		capability "Power Meter"
 		capability "Refresh"
+		capability "Sensor"
 		attribute "powerContent", "string"
 	}
 

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -18,8 +18,8 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
-	
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+
     	capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -57,7 +57,7 @@ metadata {
 		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
 			state "level", label: 'Level ${currentValue}%'
 		}
-		
+
 
 		main(["switch"])
 		details(["switch", "level", "levelSliderControl", "refresh"])
@@ -87,11 +87,11 @@ def parse(String description) {
     if (description?.startsWith("read attr")) {
     	log.debug description[-2..-1]
         def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-        
+
 		sendEvent( name: "level", value: i )
     }
-    
-	
+
+
 }
 
 def on() {
@@ -136,16 +136,16 @@ def setLevel(value) {
 def configure() {
 
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [	
-  
+	def configCmds = [
+
         //Switch Reporting
         "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-        
+
         //Level Control Reporting
         "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 500",
 	]

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -18,7 +18,7 @@
 
 
 metadata {
-	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Polling"

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -16,7 +16,7 @@
  * Date: 2015-10-11
  */
  metadata {
- 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
         capability "Actuator"
         capability "Switch"
         capability "Polling"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-lock.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-lock.src/README.md

@@ -0,0 +1,46 @@
+# Zigbee Lock
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Push Button Deadbolt (YRD210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-deadbolt-yrd210)
+* [Yale Touchscreen Lever (YRL220-ZB)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-lever-yrl220)
+* [Yale Touchscreen Deadbolt (YRD220-HA))](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-deadbolt-yrd220)
+* [Yale Key Free Touchscreen Deadbolt (YRD240-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-key-free-touchscreen-deadbolt-yrd240)
+* [Yale Push Button Lever Lock (YRL210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-lever-lock-yrl210)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Lock** - allows for the control of a lock device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Yale Push Button Deadbolt (YRD210-HA) is a Zigbee device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+ * __122min__ checkInterval
+
+## Battery Specification
+
+Four AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Yale Locks Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205138400)

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -24,6 +24,7 @@ import physicalgraph.zigbee.zcl.DataType
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
@@ -83,6 +84,9 @@ def uninstalled() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
                                   DataType.ENUM8, 0, 3600, null) +
@@ -92,6 +96,13 @@ def configure() {
     return refresh() + cmds // send refresh cmds as part of config
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE)
+}
+
 def refresh() {
     def cmds =
         zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-switch.src/README.md

@@ -0,0 +1,35 @@
+# Leviton Switch (ZigBee)
+
+Cloud Execution
+
+Works with:
+
+* [Leviton Switch (ZigBee)](https://www.smartthings.com/works-with-smartthings/leviton/leviton-switch)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Zigbee Switch with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209686003-How-to-connect-Leviton-ZigBee-devices)

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -13,11 +13,12 @@
  */
 
 metadata {
-    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
         capability "Switch"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
@@ -75,11 +76,20 @@ def on() {
     zigbee.on()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.onOffConfig()
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffRefresh() + zigbee.onOffConfig()
 }

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
 		capability "Actuator"
 		capability "Color Control"

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -30,7 +30,7 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_LT01", deviceJoinName: "Halo RL56 Wireless"
+        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_RL5601", deviceJoinName: "Halo RL56"
     }
 
     // UI tile definitions
@@ -101,7 +101,7 @@ def refresh() {
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
         cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
     }
-    
+
 	cmds
 }
 

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zooz-power-strip-outlet.src/zooz-power-strip-outlet.groovy

@@ -0,0 +1,41 @@
+/**
+ *  Zooz Power Strip Outlet
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip Outlet", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}

devicetypes/smartthings/zooz-power-strip.src/zooz-power-strip.groovy

@@ -0,0 +1,217 @@
+/**
+ *  Zooz ZEN20 Power Strip Outlet
+ *
+ *  Implementation of the Zooz ZEN20 power strip that uses the new composite device capabilities to provide individual
+ *  control of each outlet from SmartApps as well as the mobile app. Incorporates contributions from:
+ *
+ *  Eric Maycock (https://github.com/erocm123/SmartThingsPublic/blob/master/devicetypes/erocm123/zooz-power-strip.src/zooz-power-strip.groovy)
+ *  Robert Vandervoort (https://github.com/robertvandervoort/SmartThings/blob/master/zooZ-Strip-ZEN20/device_type-zooZ-strip-ZEN20_v1.0)
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Configuration"
+
+		fingerprint manufacturer: "015D", prod: "0651", model: "F51C", deviceJoinName: "Zooz ZEN 20 Power Strip"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		childDeviceTiles("outlets")
+		standardTile("refresh", "device.switch", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def installed() {
+	createChildDevices()
+}
+
+def updated() {
+	if (!childDevices) {
+		createChildDevices()
+	}
+	else if (device.label != state.oldLabel) {
+		childDevices.each {
+			def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+			it.setLabel(newLabel)
+		}
+		state.oldLabel = device.label
+	}
+}
+
+def configure() {
+	refresh()
+}
+
+
+//////////////////////
+// Event Generation //
+//////////////////////
+def parse(String description) {
+	trace "parse('$description')"
+	def result = []
+	if (description.startsWith("Err")) {
+		result = createEvent(descriptionText:description, isStateChange:true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x60: 3, 0x32: 3, 0x25: 1, 0x20: 1])
+		if (cmd) {
+			result += zwaveEvent(cmd, 1)
+		}
+		else {
+			log.warn "Unparsed description $description"
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd, ep) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveBinaryEvent(cmd, endpoint) {
+	def result = []
+	def children = childDevices
+	def childDevice = children.find{it.deviceNetworkId.endsWith("$endpoint")}
+	if (childDevice) {
+		childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+
+		if (cmd.value) {
+			// One on and the strip is on
+			result << createEvent(name: "switch", value: "on")
+		} else {
+			// All off and the strip is off
+			if (!children.any { it.currentValue("switch") == "on" }) {
+				result << createEvent(name: "switch", value: "off")
+			}
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, ep) {
+	updateDataValue("MSR", String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId))
+	return null
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, ep) {
+	trace "applicationVersion $cmd.applicationVersion"
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd, ep) {
+	log.warn("${device.displayName}: Unhandled ${cmd}" + (ep ? " from endpoint $ep" : ""))
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def on() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+def off() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+//////////////////////
+// Child Device API //
+//////////////////////
+void childOn(String dni) {
+	onOffCmd(0xFF, channelNumber(dni))
+}
+
+void childOff(String dni) {
+	onOffCmd(0, channelNumber(dni))
+}
+
+def refresh() {
+	def cmds = (1..5).collect { endpoint ->
+		encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)
+	}
+	delayBetween(cmds, 100)
+}
+
+///////////////////
+// Local Methods //
+///////////////////
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+
+private void onOffCmd(value, endpoint = null) {
+	def actions = [
+			new physicalgraph.device.HubAction(encap(zwave.basicV1.basicSet(value: value), endpoint)),
+			new physicalgraph.device.HubAction(encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)),
+	]
+	sendHubCommand(actions, 500)
+}
+
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..5) {
+		addChildDevice("Zooz Power Strip Outlet", "${device.deviceNetworkId}-ep${i}", null,
+				[completedSetup: true, label: "${device.displayName} (CH${i})",
+				 isComponent: true, componentName: "ch$i", componentLabel: "Channel $i"])
+	}
+}
+
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:endpoint).encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private trace(msg) {
+	//log.trace(msg)
+}

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,6 +78,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-door-window-sensor.src/README.md

@@ -0,0 +1,36 @@
+# Z-Wave Door Window Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Door/Window Sensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-doorwindow-sensor-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+* **Battery** - defines that the device has a battery
+* **Contact Sensor** - allows reading the value of a contact sensor device
+
+## Device Health
+
+Z-Wave Door Window Sensor is a Z-wave sleepy device and checks in every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
+for the different models:
+* [Aeon Labs Door/Window Sensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/211834163-How-to-connect-Aeon-Labs-door-window-sensors)

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -17,17 +17,19 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 		capability "Battery"
 		capability "Configuration"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
 	}
 
 	// simulator metadata
@@ -77,7 +79,14 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,6 +68,11 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"
@@ -25,11 +25,13 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
+		capability "Health Check"
 		capability "Light"
 
 		command "reset"
 
 		fingerprint inClusters: "0x26,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"001B", deviceJoinName: "Aeon Labs Micro Smart Dimmer 2E"
 	}
 
 	simulator {
@@ -98,7 +100,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	response(refresh())
 }
 
@@ -163,6 +173,14 @@ def poll() {
 	], 1000)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Energy Meter"
 		capability "Actuator"
 		capability "Switch"
@@ -22,10 +22,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Light"
+		capability "Health Check"
 
 		command "reset"
 
 		fingerprint inClusters: "0x25,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"0012", deviceJoinName: "Aeon Labs Micro Smart Switch"
 	}
 
 	// simulator metadata
@@ -72,7 +74,14 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.MSR) {
 			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -82,7 +91,7 @@ def updated() {
 
 def parse(String description) {
 	def result = null
-	if(description == "updated") return 
+	if(description == "updated") return
 	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
 	if (cmd) {
 		result = zwaveEvent(cmd)
@@ -179,6 +188,14 @@ def poll() {
 	])
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-motion-sensor.src/README.md

@@ -0,0 +1,39 @@
+# Z-wave Motion Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Ecolink PIR Motion Detector with Pet Immunity](https://www.smartthings.com/works-with-smartthings/sensors/ecolink-pir-motion-detector-with-pet-immunity)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Ecolink PIR Motion Detector with Pet Immunity is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One CR123A Lithium 3V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Ecolink PIR Motion Detector with Pet Immunity Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294400-Ecolink-PIR-Motion-Detector-PIRZWAVE2-ECO-)

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -17,10 +17,11 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
 		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
@@ -35,7 +36,7 @@ metadata {
 		status "inactive": "command: 3003, payload: 00"
 		status "active": "command: 3003, payload: FF"
 	}
-	
+
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
@@ -50,6 +51,16 @@ metadata {
 	}
 }
 
+def installed() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description.startsWith("Err")) {
@@ -191,4 +202,4 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
-}
+}

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 */
 
 metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
-		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -28,7 +27,6 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
-		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -60,11 +58,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -126,13 +119,6 @@ def both() {
 	on()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,7 +53,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Health Check"
  		capability "Switch"
@@ -61,6 +61,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch-secure.src/zwave-switch-secure.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Refresh"
 		capability "Polling"

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Indicator"
  		capability "Switch"
@@ -65,6 +65,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -42,9 +42,9 @@ metadata {
 		status "auto"			: "command: 4003, payload: 03"
 		status "emergencyHeat"	: "command: 4003, payload: 04"
 
-		status "fanAuto"		: "command: 4403, payload: 00"
-		status "fanOn"			: "command: 4403, payload: 01"
-		status "fanCirculate"	: "command: 4403, payload: 06"
+		status "auto"			: "command: 4403, payload: 00" // "fanAuto"
+		status "on"				: "command: 4403, payload: 01" // "fanOn"
+		status "circulate"		: "command: 4403, payload: 06" // "fanCirculate
 
 		status "heat 60"        : "command: 4303, payload: 01 09 3C"
 		status "heat 68"        : "command: 4303, payload: 01 09 44"
@@ -74,8 +74,9 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
+		// Using standardTile instead of valueTile as it renders the icon better
+		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', icon: "st.thermostat.ac.air-conditioning",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -88,19 +89,20 @@ metadata {
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "off", label:'${name}', action:"switchMode", nextState:"to_heat"
-			state "heat", label:'${name}', action:"switchMode", nextState:"to_cool"
-			state "cool", label:'${name}', action:"switchMode", nextState:"..."
-			state "auto", label:'${name}', action:"switchMode", nextState:"..."
-			state "emergency heat", label:'${name}', action:"switchMode", nextState:"..."
-			state "to_heat", label: "heat", action:"switchMode", nextState:"to_cool"
-			state "to_cool", label: "cool", action:"switchMode", nextState:"..."
+			state "off", action:"switchMode", nextState:"to_heat", icon: "st.thermostat.heating-cooling-off"
+			state "heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
+			state "auto", action:"switchMode", nextState:"...", icon: "st.thermostat.auto"
+			state "emergency heat", action:"switchMode", nextState:"...", icon: "st.thermostat.emergency-heat"
+			state "to_heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "to_cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
 			state "...", label: "...", action:"off", nextState:"off"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "fanAuto", label:'${name}', action:"switchFanMode"
-			state "fanOn", label:'${name}', action:"switchFanMode"
-			state "fanCirculate", label:'${name}', action:"switchFanMode"
+			state "auto", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-auto" // "fanAuto"
+			state "on", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-on" // "fanOn"
+			state "circulate", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-circulate" // "fanCirculate"
+			state "...", label: "...", nextState:"..."
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
@@ -117,14 +119,16 @@ metadata {
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"polling.poll", icon:"st.secondary.refresh"
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
 		main "temperature"
-		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh", "configure"])
+		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
 	}
 }
 
+def installed(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
@@ -286,13 +290,13 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 	def map = [:]
 	switch (cmd.fanMode) {
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
-			map.value = "fanAuto"
+			map.value = "auto" // "fanAuto"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_LOW:
-			map.value = "fanOn"
+			map.value = "on" // "fanOn"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_CIRCULATION:
-			map.value = "fanCirculate"
+			map.value = "circulate" // "fanCirculate"
 			break
 	}
 	map.name = "thermostatFanMode"
@@ -309,15 +313,19 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSuppo
 	if(cmd.auto) { supportedModes += "auto " }
 
 	state.supportedModes = supportedModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
 	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "fanAuto " }
-	if(cmd.low) { supportedFanModes += "fanOn " }
-	if(cmd.circulation) { supportedFanModes += "fanCirculate " }
+	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
+	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
+	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
 
 	state.supportedFanModes = supportedFanModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
@@ -412,7 +420,13 @@ def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
 		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format()
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
 	], 2300)
 }
 
@@ -453,11 +467,11 @@ def switchToMode(nextMode) {
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
 	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "fanAuto fanOn"
-	def modeOrder = ["fanAuto", "fanCirculate", "fanOn"]
+	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
+	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
-	while (!supportedModes?.contains(nextMode) && nextMode != "fanAuto") {
+	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
 		nextMode = next(nextMode)
 	}
 	switchToFanMode(nextMode)
@@ -468,11 +482,11 @@ def switchToFanMode(nextMode) {
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand
-	if (nextMode == "fanAuto") {
+	if (nextMode == "auto") { // "fanAuto"
 		returnCommand = fanAuto()
-	} else if (nextMode == "fanOn") {
+	} else if (nextMode == "on") { // "fanOn"
 		returnCommand = fanOn()
-	} else if (nextMode == "fanCirculate") {
+	} else if (nextMode == "circulate") { // "fanCirculate"
 		returnCommand = fanCirculate()
 	} else {
 		log.debug("no fan mode '$nextMode'")

devicetypes/smartthings/zwave-virtual-momentary-contact-switch.src/zwave-virtual-momentary-contact-switch.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-07
  */
 metadata {
-	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Refresh"

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -29,7 +29,7 @@ metadata {
 		status "dry": "command: 3003, payload: 00"
 		status "wet": "command: 3003, payload: FF"
 	}
-	
+
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"

devicetypes/zenwithin/zen-thermostat.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/zenwithin/zen-thermostat.src/README.md

@@ -0,0 +1,37 @@
+# Zen Thermostat
+
+Cloud Execution
+
+Works with: 
+
+* [Zen Thermostat](https://www.smartthings.com/works-with-smartthings/zen/zen-thermostat)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Thermostat** - allows for the control of a thermostat device
+* **Temperature Measurement** - get the temperature from a Device that reports current temperature
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - it represents that a Device has attributes
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Zen Thermostat with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Zen Thermostat Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204356564-Zen-Thermostat)

devicetypes/zenwithin/zen-thermostat.src/zen-thermostat.groovy

@@ -12,8 +12,9 @@ metadata {
     capability "Configuration"
     capability "Refresh"
     capability "Sensor"
-    
-    fingerprint profileId: "0104", endpointId: "01", inClusters: "0000,0001,0003,0004,0005,0020,0201,0202,0204,0B05", outClusters: "000A, 0019"
+    capability "Health Check"
+
+    fingerprint profileId: "0104", endpointId: "01", inClusters: "0000,0001,0003,0004,0005,0020,0201,0202,0204,0B05", outClusters: "000A, 0019", manufacturer: "Zen Within", model: "Zen-01", deviceJoinName: "Zen Thermostat"
     
     //attribute "temperatureUnit", "number"
       
@@ -467,8 +468,12 @@ def fanAuto() {
     "st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
 }
 
-
-
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    refresh()
+}
 
 // =============== SmartThings Default Fucntions: refresh, configure, poll ===============
 def refresh()
@@ -502,6 +507,7 @@ def poll()
 
 def configure() 
 {
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "configure() - binding & attribute report"
     [
           //Set long poll interval to 2 qs
@@ -511,7 +517,7 @@ def configure()
       	  //Thermostat - Cluster 201
           "zdo bind 0x${device.deviceNetworkId} 1 1 0x201 {${device.zigbeeId}} {}", "delay 500",
           
-          "zcl global send-me-a-report 0x201 0 0x29 5 300 {3200}", 
+          "zcl global send-me-a-report 0x201 0 0x29 5 300 {3200}",
           "send 0x${device.deviceNetworkId} 1 1", "delay 500",
           
           "zcl global send-me-a-report 0x201 0x0011 0x29 5 300 {3200}", 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,12 +15,13 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+include 'localization'
 
 definition(
 		name: "Hue (Connect)",
 		namespace: "smartthings",
 		author: "SmartThings",
-		description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
+		description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Please update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
 		category: "SmartThings Labs",
 		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
@@ -28,11 +29,11 @@ definition(
 )
 
 preferences {
-	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
-	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
-	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
-	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
-	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
+	page(name: "mainPage", title: "", content: "mainPage", refreshTimeout: 5)
+	page(name: "bridgeDiscovery", title: "", content: "bridgeDiscovery", refreshTimeout: 5)
+	page(name: "bridgeDiscoveryFailed", title: "", content: "bridgeDiscoveryFailed", refreshTimeout: 0)
+	page(name: "bridgeBtnPush", title: "", content: "bridgeLinking", refreshTimeout: 5)
+	page(name: "bulbDiscovery", title: "", content: "bulbDiscovery", refreshTimeout: 5)
 }
 
 def mainPage() {
@@ -47,15 +48,14 @@ def mainPage() {
 	}
 }
 
-def bridgeDiscovery(params=[:])
-{
+def bridgeDiscovery(params = [:]) {
 	def bridges = bridgesDiscovered()
 	int bridgeRefreshCount = !state.bridgeRefreshCount ? 0 : state.bridgeRefreshCount as int
 	state.bridgeRefreshCount = bridgeRefreshCount + 1
 	def refreshInterval = 3
 
 	def options = bridges ?: []
-	def numFound = options.size() ?: 0
+	def numFound = options.size() ?: "0"
 	if (numFound == 0) {
 		if (state.bridgeRefreshCount == 25) {
 			log.trace "Cleaning old bridges memory"
@@ -75,25 +75,26 @@ def bridgeDiscovery(params=[:])
 	ssdpSubscribe()
 
 	//bridge discovery request every 15 //25 seconds
-	if((bridgeRefreshCount % 5) == 0) {
+	if ((bridgeRefreshCount % 5) == 0) {
 		discoverBridges()
 	}
 
 	//setup.xml request every 3 seconds except on discoveries
-	if(((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
+	if (((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
 		verifyHueBridges()
 	}
 
-	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
+	return dynamicPage(name: "bridgeDiscovery", title: "Discovery Started!", nextPage: "bridgeBtnPush", refreshInterval: refreshInterval, uninstall: true) {
+		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+
+
+			input(name: "selectedHue", type: "enum", required: false, title: "Select Hue Bridge ({{numFound}} found)", messageArgs: [numFound: numFound], multiple: false, options: options, submitOnChange: true)
 		}
 	}
 }
 
 def bridgeDiscoveryFailed() {
-	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+	return dynamicPage(name: "bridgeDiscoveryFailed", title: "Bridge Discovery Failed!", nextPage: "bridgeDiscovery") {
 		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
 		}
 	}
@@ -109,12 +110,12 @@ def bridgeLinking() {
 	def paragraphText
 	if (selectedHue) {
 		if (state.refreshUsernameNeeded) {
-			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
+			paragraphText = "The current Hue username is invalid. Please press the button on your Hue Bridge to relink."
 		} else {
-			paragraphText = "Press the button on your Hue Bridge to setup a link. "
+			paragraphText = "Press the button on your Hue Bridge to setup a link."
 		}
 	} else {
-		paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+		paragraphText = "You haven't selected a Hue Bridge, please Press 'Done' and select one before clicking next."
 	}
 	if (state.username) { //if discovery worked
 		if (state.refreshUsernameNeeded) {
@@ -127,13 +128,13 @@ def bridgeLinking() {
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
 	}
 
-	if((linkRefreshcount % 2) == 0 && !state.username) {
+	if ((linkRefreshcount % 2) == 0 && !state.username) {
 		sendDeveloperReq()
 	}
 
-	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
+	return dynamicPage(name: "bridgeBtnPush", title: title, nextPage: nextPage, refreshInterval: refreshInterval) {
 		section("") {
-			paragraph """${paragraphText}"""
+			paragraph "$paragraphText"
 		}
 	}
 }
@@ -149,18 +150,18 @@ def bulbDiscovery() {
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
 	// List lights currently not added to the user (editable)
-	def newLights = allLightsFound.findAll {getChildDevice(it.key) == null} ?: [:]
-	newLights = newLights.sort {it.value.toLowerCase()}
+	def newLights = allLightsFound.findAll { getChildDevice(it.key) == null } ?: [:]
+	newLights = newLights.sort { it.value.toLowerCase() }
 
 	// List lights already added to the user (not editable)
-	def existingLights = allLightsFound.findAll {getChildDevice(it.key) != null} ?: [:]
-	existingLights = existingLights.sort {it.value.toLowerCase()}
+	def existingLights = allLightsFound.findAll { getChildDevice(it.key) != null } ?: [:]
+	existingLights = existingLights.sort { it.value.toLowerCase() }
 
-	def numFound = newLights.size() ?: 0
-	if (numFound == 0)
+	def numFound = newLights.size() ?: "0"
+	if (numFound == "0")
 		app.updateSetting("selectedBulbs", "")
 
-	if((bulbRefreshCount % 5) == 0) {
+	if ((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
 	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
@@ -178,14 +179,14 @@ def bulbDiscovery() {
 		}
 	}
 
-	if (bulbRefreshCount > 200 && numFound == 0) {
+	def existingLightsSize = "${existingLights.size()}"
+	if (bulbRefreshCount > 200 && numFound == "0") {
 		// Time out after 10 minutes
 		state.inBulbDiscovery = false
 		bulbRefreshCount = 0
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
-			section("Failed to discover any lights, please try again later. Click Done to exit.") {
-				//input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
+		return dynamicPage(name: "bulbDiscovery", title: "Light Discovery Failed!", nextPage: "", refreshInterval: 0, install: true, uninstall: true) {
+			section("Failed to discover any lights, please try again later. Click 'Done' to exit.") {
+				paragraph title: "Previously added Hue Lights ({{existingLightsSize}} added)", messageArgs: [existingLightsSize: existingLightsSize], existingLightsDescription
 			}
 			section {
 				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
@@ -193,10 +194,10 @@ def bulbDiscovery() {
 		}
 
 	} else {
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+		return dynamicPage(name: "bulbDiscovery", title: "Light Discovery Started!", nextPage: "", refreshInterval: refreshInterval, install: true, uninstall: true) {
 			section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
+				input(name: "selectedBulbs", type: "enum", required: false, title: "Select Hue Lights to add ({{numFound}} found)", messageArgs: [numFound: numFound], multiple: true, submitOnChange: true, options: newLights)
+				paragraph title: "Previously added Hue Lights ({{existingLightsSize}} added)", messageArgs: [existingLightsSize: existingLightsSize], existingLightsDescription
 			}
 			section {
 				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
@@ -217,19 +218,19 @@ private sendDeveloperReq() {
 	def token = app.id
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "POST",
-			path: "/api",
+			method : "POST",
+			path   : "/api",
 			headers: [
 					HOST: host
 			],
-			body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
+			body   : [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/api/${state.username}/lights",
+			method : "GET",
+			path   : "/api/${state.username}/lights",
 			headers: [
 					HOST: host
 			]], "${selectedHue}", [callback: "lightsHandler"]))
@@ -238,8 +239,8 @@ private discoverHueBulbs() {
 private verifyHueBridge(String deviceNetworkId, String host) {
 	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/description.xml",
+			method : "GET",
+			path   : "/description.xml",
 			headers: [
 					HOST: host
 			]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
@@ -266,18 +267,18 @@ Map bridgesDiscovered() {
 }
 
 Map bulbsDiscovered() {
-	def bulbs =  getHueBulbs()
+	def bulbs = getHueBulbs()
 	def bulbmap = [:]
 	if (bulbs instanceof java.util.Map) {
 		bulbs.each {
 			def value = "${it.value.name}"
-			def key = app.id +"/"+ it.value.id
+			def key = app.id + "/" + it.value.id
 			bulbmap["${key}"] = value
 		}
 	} else { //backwards compatable
 		bulbs.each {
 			def value = "${it.name}"
-			def key = app.id +"/"+ it.id
+			def key = app.id + "/" + it.id
 			logg += "$value - $key, "
 			bulbmap["${key}"] = value
 		}
@@ -294,7 +295,7 @@ def getHueBridges() {
 }
 
 def getVerifiedHueBridges() {
-	getHueBridges().findAll{ it?.value?.verified == true }
+	getHueBridges().findAll { it?.value?.verified == true }
 }
 
 def installed() {
@@ -331,7 +332,7 @@ def manualRefresh() {
 	poll()
 }
 
-def uninstalled(){
+def uninstalled() {
 	// Remove bridgedevice connection to allow uninstall of smartapp even though bridge is listed
 	// as user of smartapp
 	app.updateSetting("bridgeDevice", null)
@@ -371,7 +372,7 @@ private getDeviceType(hueType) {
 		return null
 }
 
-private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
+private addChildBulb(dni, hueType, name, hub, update = false, device = null) {
 	def deviceType = getDeviceType(hueType)
 
 	if (deviceType) {
@@ -386,7 +387,7 @@ def addBulbs() {
 	def bulbs = getHueBulbs()
 	selectedBulbs?.each { dni ->
 		def d = getChildDevice(dni)
-		if(!d) {
+		if (!d) {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
@@ -419,11 +420,11 @@ def addBulbs() {
 
 def addBridge() {
 	def vbridges = getVerifiedHueBridges()
-	def vbridge = vbridges.find {"${it.value.mac}" == selectedHue}
+	def vbridge = vbridges.find { "${it.value.mac}" == selectedHue }
 
-	if(vbridge) {
+	if (vbridge) {
 		def d = getChildDevice(selectedHue)
-		if(!d) {
+		if (!d) {
 			// compatibility with old devices
 			def newbridge = true
 			childDevices.each {
@@ -458,20 +459,22 @@ def addBridge() {
 					childDevice?.sendEvent(name: "idNumber", value: idNumber)
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
-							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
-							childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
+							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" + vbridge.value.port)
+							childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" + vbridge.value.port)
 						} else {
-							childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-							childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
+							childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" + convertHexToInt(vbridge.value.port))
+							childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" + convertHexToInt(vbridge.value.port))
 						}
 					} else {
-						childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
-						childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
+						childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" + convertHexToInt(vbridge.value.deviceAddress))
+						childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" + convertHexToInt(vbridge.value.deviceAddress))
 					}
 				} else {
 					log.error "Failed to create Hue Bridge device"
 				}
 			}
+		} else {
+			log.debug "found ${d.displayName} with id $selectedHue already exists"
 		}
 	}
 }
@@ -482,14 +485,14 @@ def ssdpBridgeHandler(evt) {
 
 	def hub = evt?.hubId
 	def parsedEvent = parseLanMessage(description)
-	parsedEvent << ["hub":hub]
+	parsedEvent << ["hub": hub]
 
 	def bridges = getHueBridges()
 	log.trace bridges.toString()
 	if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
 		//bridge does not exist
 		log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
-		bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+		bridges << ["${parsedEvent.ssdpUSN.toString()}": parsedEvent]
 	} else {
 		// update the values
 		def ip = convertHexToIP(parsedEvent.networkAddress)
@@ -510,7 +513,7 @@ def ssdpBridgeHandler(evt) {
 				bridge.setDeviceNetworkId("${dniReceived}")
 				dstate.mac = dniReceived
 				// Check to see if selectedHue is a valid bridge, otherwise update it
-				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				def isSelectedValid = bridges?.find { it.value?.mac == selectedHue }
 				if (isSelectedValid == null) {
 					log.warn "Correcting selectedHue in state"
 					app.updateSetting("selectedHue", dniReceived)
@@ -530,7 +533,7 @@ def ssdpBridgeHandler(evt) {
 				dstate.ip = ip
 				dstate.port = port
 				dstate.name = "Philips hue ($ip)"
-				d.sendEvent(name:"networkAddress", value: host)
+				d.sendEvent(name: "networkAddress", value: host)
 				d.updateDataValue("networkAddress", host)
 			}
 			if (dstate.mac != dniReceived) {
@@ -539,7 +542,7 @@ def ssdpBridgeHandler(evt) {
 			}
 			if (selectedHue != dniReceived) {
 				// Check to see if selectedHue is a valid bridge, otherwise update it
-				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				def isSelectedValid = bridges?.find { it.value?.mac == selectedHue }
 				if (isSelectedValid == null) {
 					log.warn "Correcting selectedHue in state"
 					app.updateSetting("selectedHue", dniReceived)
@@ -554,7 +557,7 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 	def body = hubResponse.xml
 	if (body?.device?.modelName?.text()?.startsWith("Philips hue bridge")) {
 		def bridges = getHueBridges()
-		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		def bridge = bridges.find { it?.key?.contains(body?.device?.UDN?.text()) }
 		if (bridge) {
 			def idNumber = getBridgeIdNumber(body?.device?.serialNumber?.text())
 
@@ -563,10 +566,10 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 			def name = body?.device?.friendlyName?.text()
 			def index = name?.indexOf('(')
 			if (index != -1) {
-				name = name.substring(0,index)
+				name = name.substring(0, index)
 				name += " ($idNumber)"
 			}
-			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), idNumber: idNumber, verified: true]
+			bridge.value << [name: name, serialNumber: body?.device?.serialNumber?.text(), idNumber: idNumber, verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}
@@ -609,7 +612,7 @@ def locationHandler(evt) {
 
 	def hub = evt?.hubId
 	def parsedEvent = parseLanMessage(description)
-	parsedEvent << ["hub":hub]
+	parsedEvent << ["hub": hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
 		//SSDP DISCOVERY EVENTS
@@ -619,7 +622,7 @@ def locationHandler(evt) {
 		if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
 			//bridge does not exist
 			log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
-			bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+			bridges << ["${parsedEvent.ssdpUSN.toString()}": parsedEvent]
 		} else {
 			// update the values
 			def ip = convertHexToIP(parsedEvent.networkAddress)
@@ -654,12 +657,12 @@ def locationHandler(evt) {
 					networkAddress = d.latestState('networkAddress').stringValue
 				}
 				log.trace "Host: $host - $networkAddress"
-				if(host != networkAddress) {
+				if (host != networkAddress) {
 					log.debug "Device's port or ip changed for device $d..."
 					dstate.ip = ip
 					dstate.port = port
 					dstate.name = "Philips hue ($ip)"
-					d.sendEvent(name:"networkAddress", value: host)
+					d.sendEvent(name: "networkAddress", value: host)
 					d.updateDataValue("networkAddress", host)
 				}
 			}
@@ -672,14 +675,14 @@ def locationHandler(evt) {
 			def body = new XmlSlurper().parseText(parsedEvent.body)
 			if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
 				def bridges = getHueBridges()
-				def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+				def bridge = bridges.find { it?.key?.contains(body?.device?.UDN?.text()) }
 				if (bridge) {
-					bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+					bridge.value << [name: body?.device?.friendlyName?.text(), serialNumber: body?.device?.serialNumber?.text(), verified: true]
 				} else {
 					log.error "/description.xml returned a bridge that didn't exist"
 				}
 			}
-		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
+		} else if (headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
 			log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
@@ -704,7 +707,7 @@ def locationHandler(evt) {
 	}
 }
 
-def doDeviceSync(){
+def doDeviceSync() {
 	log.trace "Doing Hue Device Sync!"
 
 	// Check if state.updating failed to clear
@@ -713,9 +716,6 @@ def doDeviceSync(){
 		log.warn "state.updating failed to clear"
 	}
 
-	if (selectedHue) {
-		addBridge()
-	}
 	convertBulbListToMap()
 	poll()
 	ssdpSubscribe()
@@ -788,7 +788,7 @@ private void checkBridgeStatus() {
 
 def isValidSource(macAddress) {
 	def vbridges = getVerifiedHueBridges()
-	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
+	return (vbridges?.find { "${it.value.mac}" == macAddress }) != null
 }
 
 def isInBulbDiscovery() {
@@ -802,19 +802,19 @@ private updateBulbState(messageBody, hub) {
 	def toRemove = [:]
 	toRemove << bulbs
 
-	messageBody.each { k,v ->
+	messageBody.each { k, v ->
 
 		if (v instanceof Map) {
 			if (bulbs[k] == null) {
 				bulbs[k] = [:]
 			}
-			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
+			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hub, remove: false]
 			toRemove.remove(k)
 		}
 	}
 
 	// Remove bulbs from state that are no longer discovered
-	toRemove.each { k,v ->
+	toRemove.each { k, v ->
 		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
 		bulbs.remove(k)
 	}
@@ -938,12 +938,11 @@ private sendBasicEvents(device, param, value) {
  *
  * 	Example payload
  * [,
- * {"success":{"/lights/5/state/bri":87}},
- * {"success":{"/lights/5/state/transitiontime":4}},
- * {"success":{"/lights/5/state/on":true}},
- * {"success":{"/lights/5/state/xy":[0.4152,0.5336]}},
- * {"success":{"/lights/5/state/alert":"none"}}
- * ]
+ *{"success":{"/lights/5/state/bri":87}},
+ *{"success":{"/lights/5/state/transitiontime":4}},
+ *{"success":{"/lights/5/state/on":true}},
+ *{"success":{"/lights/5/state/xy":[0.4152,0.5336]}},
+ *{"success":{"/lights/5/state/alert":"none"}}* ]
  *
  * @param body a data structure of lists and maps based on a JSON data
  * @return empty array
@@ -996,7 +995,7 @@ private handleCommandResponse(body) {
  *
  * 	Example payload
  *
- * {"5":{"state": {"on":true,"bri":102,"hue":25600,"sat":254,"effect":"none","xy":[0.1700,0.7000],"ct":153,"alert":"none",
+ *{"5":{"state": {"on":true,"bri":102,"hue":25600,"sat":254,"effect":"none","xy":[0.1700,0.7000],"ct":153,"alert":"none",
  * "colormode":"xy","reachable":true}, "type": "Extended color light", "name": "Go", "modelid": "LLC020", "manufacturername": "Philips",
  * "uniqueid":"00:17:88:01:01:13:d5:11-0b", "swversion": "5.38.1.14378"},
  * "6":{"state": {"on":true,"bri":103,"hue":14910,"sat":144,"effect":"none","xy":[0.4596,0.4105],"ct":370,"alert":"none",
@@ -1070,9 +1069,9 @@ def hubVerification(bodytext) {
 	def body = new XmlSlurper().parseText(bodytext)
 	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
 		def bridges = getHueBridges()
-		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		def bridge = bridges.find { it?.key?.contains(body?.device?.UDN?.text()) }
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			bridge.value << [name: body?.device?.friendlyName?.text(), serialNumber: body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}
@@ -1108,7 +1107,7 @@ def setLevel(childDevice, percent) {
 	else
 		level = Math.min(Math.round(percent * 254 / 100), 254)
 
-	createSwitchEvent(childDevice, level > 0 ,percent)
+	createSwitchEvent(childDevice, level > 0, percent)
 
 	// For Zigbee lights, if level is set to 0 ST just turns them off without changing level
 	// that means that the light will still be on when on is called next time
@@ -1138,7 +1137,7 @@ def setHue(childDevice, percent) {
 	def id = getId(childDevice)
 	updateInProgress()
 	// 0 - 65535
-	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
+	def level = Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [hue: level, on: true])
@@ -1150,7 +1149,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def id = getId(childDevice)
 	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
-	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
+	def ct = hueSettings == 6500 ? 153 : Math.round(1000000 / huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $ct"
@@ -1268,7 +1267,7 @@ private getBridgeIP() {
 		def d = getChildDevice(selectedHue)
 		if (d) {
 			if (d.getDeviceDataByName("networkAddress"))
-				host =  d.getDeviceDataByName("networkAddress")
+				host = d.getDeviceDataByName("networkAddress")
 			else
 				host = d.latestState('networkAddress').stringValue
 		}
@@ -1292,26 +1291,26 @@ private getBridgeIP() {
 }
 
 private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
+	Integer.parseInt(hex, 16)
 }
 
 def convertBulbListToMap() {
 	try {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
-			state.bulbs?.unique {it.id}.each { bulb ->
-				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
+			state.bulbs?.unique { it.id }.each { bulb ->
+				map << ["${bulb.id}": ["id": bulb.id, "name": bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub": bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map
 		}
 	}
-	catch(Exception e) {
+	catch (Exception e) {
 		log.error "Caught error attempting to convert bulb list to map: $e"
 	}
 }
 
 private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+	[convertHexToInt(hex[0..1]), convertHexToInt(hex[2..3]), convertHexToInt(hex[4..5]), convertHexToInt(hex[6..7])].join(".")
 }
 
 private Boolean hasAllHubsOver(String desiredFirmware) {
@@ -1328,7 +1327,7 @@ private List getRealHubFirmwareVersions() {
  * @param childDevice device to send event for
  * @param setSwitch The new switch state, "on" or "off"
  * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- *				  that should generate "off" instead of level change
+ * 				  that should generate "off" instead of level change
  */
 private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 
@@ -1369,12 +1368,12 @@ private colorPointsForModel(model = null) {
 		case "LLC013": /* Storylight */
 		case "LST001": /* Light Strips */
 		case "LLC010": /* Hue Living Colors Iris + */
-			result = [r:[x: 0.704f, y: 0.296f], g:[x: 0.2151f, y: 0.7106f], b:[x: 0.138f, y: 0.08f]];
+			result = [r: [x: 0.704f, y: 0.296f], g: [x: 0.2151f, y: 0.7106f], b: [x: 0.138f, y: 0.08f]];
 			break
 	// Gamut C
 		case "LLC020": /* Hue Go */
 		case "LST002": /* Hue LightStrips Plus */
-			result = [r:[x: 0.692f, y: 0.308f], g:[x: 0.17f, y: 0.7f], b:[x: 0.153f, y: 0.048f]];
+			result = [r: [x: 0.692f, y: 0.308f], g: [x: 0.17f, y: 0.7f], b: [x: 0.153f, y: 0.048f]];
 			break
 	// Gamut B
 		case "LCT001": /* Hue A19 */
@@ -1383,7 +1382,7 @@ private colorPointsForModel(model = null) {
 		case "LCT007": /* Hue A19 + */
 		case "LLM001": /* Color Light Module + */
 		default:
-			result = [r:[x: 0.675f, y: 0.322f], g:[x: 0.4091f, y: 0.518f], b:[x: 0.167f, y: 0.04f]];
+			result = [r: [x: 0.675f, y: 0.322f], g: [x: 0.4091f, y: 0.518f], b: [x: 0.167f, y: 0.04f]];
 
 	}
 	return result;
@@ -1402,9 +1401,9 @@ private colorPointsForModel(model = null) {
 private float[] calculateXY(colorStr, model = null) {
 
 	// #ffa013
-	def cred = Integer.valueOf( colorStr.substring( 1, 3 ), 16 )
-	def cgreen = Integer.valueOf( colorStr.substring( 3, 5 ), 16 )
-	def cblue = Integer.valueOf( colorStr.substring( 5, 7 ), 16 )
+	def cred = Integer.valueOf(colorStr.substring(1, 3), 16)
+	def cgreen = Integer.valueOf(colorStr.substring(3, 5), 16)
+	def cblue = Integer.valueOf(colorStr.substring(5, 7), 16)
 
 	float red = cred / 255.0f;
 	float green = cgreen / 255.0f;
@@ -1474,7 +1473,6 @@ private float[] calculateXY(colorStr, model = null) {
 	//		xy[0] = PHHueHelper.precision(4, xy[0]);
 	//		xy[1] = PHHueHelper.precision(4, xy[1]);
 
-
 	// TODO needed, assume it just sets number of decimals?
 	//xy[0] = PHHueHelper.precision(xy[0]);
 	//xy[1] = PHHueHelper.precision(xy[1]);
@@ -1490,10 +1488,10 @@ private float[] calculateXY(colorStr, model = null) {
  *
  * @param points the float array contain x and the y value. [x,y]
  * @param model the model of the lamp, example: "LCT001" for hue bulb. Used to calculate the color gamut.
- *		If this value is empty the default gamut values are used.
+ * 		If this value is empty the default gamut values are used.
  * @return the color value in hex (#ff03d3). If xy is null OR xy is not an array of size 2, Color. BLACK will be returned
  */
-private String colorFromXY(points, model ) {
+private String colorFromXY(points, model) {
 
 	if (points == null || model == null) {
 		log.warn "Input color missing"
@@ -1551,9 +1549,9 @@ private String colorFromXY(points, model ) {
 	// float b = X * 0.0556f - Y * 0.2040f + Z * 1.0570f;
 
 	// sRGB D65 conversion
-	float r =  x2 * 1.656492f  - y2 * 0.354851f - z2 * 0.255038f;
-	float g = -x2 * 0.707196f  + y2 * 1.655397f + z2 * 0.036152f;
-	float b =  x2 *  0.051713f - y2 * 0.121364f + z2 * 1.011530f;
+	float r = x2 * 1.656492f - y2 * 0.354851f - z2 * 0.255038f;
+	float g = -x2 * 0.707196f + y2 * 1.655397f + z2 * 0.036152f;
+	float b = x2 * 0.051713f - y2 * 0.121364f + z2 * 1.011530f;
 
 	if (r > b && r > g && r > 1.0f) {
 		// red is too big
@@ -1615,7 +1613,6 @@ private String colorFromXY(points, model ) {
 	return "#$r1$g1$b1"
 }
 
-
 /**
  * Calculates crossProduct of two 2D vectors / points.
  *
@@ -1644,8 +1641,8 @@ private getClosestPointToPoints(A, B, P) {
 	def AP = [x: (P.x - A.x), y: (P.y - A.y)];
 	def AB = [x: (B.x - A.x), y: (B.y - A.y)];
 
-	float ab2 = AB.x*AB.x + AB.y*AB.y;
-	float ap_ab = AP.x*AB.x + AP.y*AB.y;
+	float ab2 = AB.x * AB.x + AB.y * AB.y;
+	float ap_ab = AP.x * AB.x + AP.y * AB.y;
 
 	float t = ap_ab / ab2;
 
@@ -1685,9 +1682,9 @@ private float getDistanceBetweenTwoPoints(one, two) {
  */
 private boolean checkPointInLampsReach(p, colorPoints) {
 
-	def red =   colorPoints.r;
+	def red = colorPoints.r;
 	def green = colorPoints.g;
-	def blue =  colorPoints.b;
+	def blue = colorPoints.b;
 
 	def v1 = [x: (green.x - red.x), y: (green.y - red.y)];
 	def v2 = [x: (blue.x - red.x), y: (blue.y - red.y)];
@@ -1697,12 +1694,9 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 	float s = crossProduct(q, v2) / crossProduct(v1, v2);
 	float t = crossProduct(v1, q) / crossProduct(v1, v2);
 
-	if ( (s >= 0.0f) && (t >= 0.0f) && (s + t <= 1.0f))
-	{
+	if ((s >= 0.0f) && (t >= 0.0f) && (s + t <= 1.0f)) {
 		return true;
-	}
-	else
-	{
+	} else {
 		return false;
 	}
 }
@@ -1715,10 +1709,10 @@ private boolean checkPointInLampsReach(p, colorPoints) {
  *
  * @return HSV representation in an array (0-100) [hue, sat, value]
  */
-def hexToHsv(colorStr){
-	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
-	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
-	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255
+def hexToHsv(colorStr) {
+	def r = Integer.valueOf(colorStr.substring(1, 3), 16) / 255
+	def g = Integer.valueOf(colorStr.substring(3, 5), 16) / 255
+	def b = Integer.valueOf(colorStr.substring(5, 7), 16) / 255
 
 	def max = Math.max(Math.max(r, g), b)
 	def min = Math.min(Math.min(r, g), b)
@@ -1728,10 +1722,10 @@ def hexToHsv(colorStr){
 	def d = max - min
 	s = max == 0 ? 0 : d / max
 
-	if(max == min){
+	if (max == min) {
 		h = 0
-	}else{
-		switch(max){
+	} else {
+		switch (max) {
 			case r: h = (g - b) / d + (g < b ? 6 : 0); break
 			case g: h = (b - r) / d + 2; break
 			case b: h = (r - g) / d + 4; break
@@ -1746,13 +1740,13 @@ def hexToHsv(colorStr){
  * Converts HSV/HSB color to RGB in hex.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
- * @param  hue hue 0-100
- * @param  sat saturation 0-100
- * @param  value value 0-100 (defaults to 100)
+ * @param hue hue 0-100
+ * @param sat saturation 0-100
+ * @param value value 0-100 (defaults to 100)
 
  * @return the color in hex (#ff03d3)
  */
-def hsvToHex(hue, sat, value = 100){
+def hsvToHex(hue, sat, value = 100) {
 	def r, g, b;
 	def h = hue / 100
 	def s = sat / 100