Modifying 'NetworkScan'

WeMo uninstall not available

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -0,0 +1,513 @@
+// keen home smart vent
+// http://www.keenhome.io
+// SmartThings Device Handler v1.0.0
+
+metadata {
+    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Keen Home") {
+        capability "Switch Level"
+        capability "Switch"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Temperature Measurement"
+        capability "Battery"
+
+        command "getLevel"
+        command "getOnOff"
+        command "getPressure"
+        command "getBattery"
+        command "getTemperature"
+        command "setZigBeeIdTile"
+        command "clearObstruction"
+
+        fingerprint endpoint: "1",
+        profileId: "0104",
+        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
+        outClusters: "0019"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
+            state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
+        }
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
+            state "level", action:"switch level.setLevel"
+        }
+        standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        valueTile("temperature", "device.temperature", inactiveLabel: false) {
+            state "temperature", label:'${currentValue}°',
+            backgroundColors:[
+                [value: 31, color: "#153591"],
+                [value: 44, color: "#1e9cbb"],
+                [value: 59, color: "#90d2a7"],
+                [value: 74, color: "#44b621"],
+                [value: 84, color: "#f1d801"],
+                [value: 95, color: "#d04e00"],
+                [value: 96, color: "#bc2323"]
+            ]
+        }
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+            state "battery", label: 'Battery \n${currentValue}%', backgroundColor:"#ffffff"
+        }
+        valueTile("zigbeeId", "device.zigbeeId", inactiveLabel: true, decoration: "flat") {
+            state "serial", label:'${currentValue}', backgroundColor:"#ffffff"
+        }
+        main "switch"
+        details(["switch","refresh","temperature","levelSliderControl","battery"])
+    }
+}
+
+/**** PARSE METHODS ****/
+def parse(String description) {
+    log.debug "description: $description"
+
+    Map map = [:]
+    if (description?.startsWith('catchall:')) {
+        map = parseCatchAllMessage(description)
+    }
+    else if (description?.startsWith('read attr -')) {
+        map = parseReportAttributeMessage(description)
+    }
+    else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+        map = parseCustomMessage(description)
+    }
+    else if (description?.startsWith('on/off: ')) {
+        map = parseOnOffMessage(description)
+    }
+
+    log.debug "Parse returned $map"
+    return map ? createEvent(map) : null
+}
+
+private Map parseCatchAllMessage(String description) {
+    log.debug "parseCatchAllMessage"
+
+    def cluster = zigbee.parse(description)
+    log.debug "cluster: ${cluster}"
+    if (shouldProcessMessage(cluster)) {
+        log.debug "processing message"
+        switch(cluster.clusterId) {
+            case 0x0001:
+                return makeBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = convertTemperatureHex(temp)
+                return makeTemperatureResult(value)
+                break
+
+            case 0x0006:
+                return makeOnOffResult(cluster.data[-1])
+                break
+        }
+    }
+
+    return [:]
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    if (cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)) {
+        return false
+    }
+
+    return true
+}
+
+private Map parseReportAttributeMessage(String description) {
+    log.debug "parseReportAttributeMessage"
+
+    Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+    log.debug "Desc Map: $descMap"
+
+    if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+        return makeOnOffResult(Int.parseInt(descMap.value));
+    }
+    else if (descMap.cluster == "0008" && descMap.attrId == "0000") {
+        return makeLevelResult(descMap.value)
+    }
+    else if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+        def value = convertTemperatureHex(descMap.value)
+        return makeTemperatureResult(value)
+    }
+    else if (descMap.cluster == "0001" && descMap.attrId == "0021") {
+        return makeBatteryResult(Integer.parseInt(descMap.value, 16))
+    }
+    else if (descMap.cluster == "0403" && descMap.attrId == "0020") {
+        return makePressureResult(Integer.parseInt(descMap.value, 16))
+    }
+    else if (descMap.cluster == "0000" && descMap.attrId == "0006") {
+        return makeSerialResult(new String(descMap.value.decodeHex()))
+    }
+
+    // shouldn't get here
+    return [:]
+}
+
+private Map parseCustomMessage(String description) {
+    Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        // log.debug "${description}"
+        // def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+        // log.debug "split: " + description.split(": ")
+        def value = Double.parseDouble(description.split(": ")[1])
+        // log.debug "${value}"
+        resultMap = makeTemperatureResult(convertTemperature(value))
+    }
+    return resultMap
+}
+
+private Map parseOnOffMessage(String description) {
+    Map resultMap = [:]
+    if (description?.startsWith('on/off: ')) {
+        def value = Integer.parseInt(description - "on/off: ")
+        resultMap = makeOnOffResult(value)
+    }
+    return resultMap
+}
+
+private Map makeOnOffResult(rawValue) {
+    log.debug "makeOnOffResult: ${rawValue}"
+    def linkText = getLinkText(device)
+    def value = rawValue == 1 ? "on" : "off"
+    return [
+        name: "switch",
+        value: value,
+        descriptionText: "${linkText} is ${value}"
+    ]
+}
+
+private Map makeLevelResult(rawValue) {
+    def linkText = getLinkText(device)
+    def value = Integer.parseInt(rawValue, 16)
+    def rangeMax = 254
+
+    // catch obstruction level
+    if (value == 255) {
+        log.debug "${linkText} is obstructed"
+        // Just return here. Once the vent is power cycled
+        // it will go back to the previous level before obstruction.
+        // Therefore, no need to update level on the display.
+        return [
+            name: "switch",
+            value: "obstructed",
+            descriptionText: "${linkText} is obstructed. Please power cycle."
+        ]
+    }
+
+    value = Math.floor(value / rangeMax * 100)
+
+    return [
+        name: "level",
+        value: value,
+        descriptionText: "${linkText} level is ${value}%"
+    ]
+}
+
+private Map makePressureResult(rawValue) {
+    log.debug 'makePressureResut'
+    def linkText = getLinkText(device)
+
+    def pascals = rawValue / 10
+    def result = [
+        name: 'pressure',
+        descriptionText: "${linkText} pressure is ${pascals}Pa",
+        value: pascals
+    ]
+
+    return result
+}
+
+private Map makeBatteryResult(rawValue) {
+    // log.debug 'makeBatteryResult'
+    def linkText = getLinkText(device)
+
+    // log.debug
+    [
+        name: 'battery',
+        value: rawValue,
+        descriptionText: "${linkText} battery is at ${rawValue}%"
+    ]
+}
+
+private Map makeTemperatureResult(value) {
+    // log.debug 'makeTemperatureResult'
+    def linkText = getLinkText(device)
+
+    // log.debug "tempOffset: ${tempOffset}"
+    if (tempOffset) {
+        def offset = tempOffset as int
+        // log.debug "offset: ${offset}"
+        def v = value as int
+        // log.debug "v: ${v}"
+        value = v + offset
+        // log.debug "value: ${value}"
+    }
+
+    return [
+        name: 'temperature',
+        value: "" + value,
+        descriptionText: "${linkText} is ${value}°${temperatureScale}",
+    ]
+}
+
+/**** HELPER METHODS ****/
+private def convertTemperatureHex(value) {
+    // log.debug "convertTemperatureHex(${value})"
+    def celsius = Integer.parseInt(value, 16).shortValue() / 100
+    // log.debug "celsius: ${celsius}"
+
+    return convertTemperature(celsius)
+}
+
+private def convertTemperature(celsius) {
+    // log.debug "convertTemperature()"
+
+    if(getTemperatureScale() == "C"){
+        return celsius
+    } else {
+        def fahrenheit = Math.round(celsiusToFahrenheit(celsius) * 100) /100
+        // log.debug "converted to F: ${fahrenheit}"
+        return fahrenheit
+    }
+}
+
+private def makeSerialResult(serial) {
+    log.debug "makeSerialResult: " + serial
+
+    def linkText = getLinkText(device)
+    sendEvent([
+        name: "serial",
+        value: serial,
+        descriptionText: "${linkText} has serial ${serial}" ])
+    return [
+        name: "serial",
+        value: serial,
+        descriptionText: "${linkText} has serial ${serial}" ]
+}
+
+// takes a level from 0 to 100 and translates it to a ZigBee move to level with on/off command
+private def makeLevelCommand(level) {
+    def rangeMax = 254
+    def scaledLevel = Math.round(level * rangeMax / 100)
+    log.debug "scaled level for ${level}%: ${scaledLevel}"
+
+    // convert to hex string and pad to two digits
+    def hexLevel = new BigInteger(scaledLevel.toString()).toString(16).padLeft(2, '0')
+
+    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${hexLevel} 0000}"
+}
+
+/**** COMMAND METHODS ****/
+def on() {
+    def linkText = getLinkText(device)
+    log.debug "open ${linkText}"
+
+    // only change the state if the vent is not obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot open because ${linkText} is obstructed")
+        return
+    }
+
+    sendEvent(makeOnOffResult(1))
+    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+}
+
+def off() {
+    def linkText = getLinkText(device)
+    log.debug "close ${linkText}"
+
+    // only change the state if the vent is not obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot close because ${linkText} is obstructed")
+        return
+    }
+
+    sendEvent(makeOnOffResult(0))
+    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+}
+
+def clearObstruction() {
+    def linkText = getLinkText(device)
+    log.debug "attempting to clear ${linkText} obstruction"
+
+    sendEvent([
+        name: "switch",
+        value: "clearing",
+        descriptionText: "${linkText} is clearing obstruction"
+    ])
+
+    // send a move command to ensure level attribute gets reset for old, buggy firmware
+    // then send a reset to factory defaults
+    // finally re-configure to ensure reports and binding is still properly set after the rtfd
+    [
+        makeLevelCommand(device.currentValue("level")), "delay 500",
+        "st cmd 0x${device.deviceNetworkId} 1 0 0 {}", "delay 5000"
+    ] + configure()
+}
+
+def setLevel(value) {
+    log.debug "setting level: ${value}"
+    def linkText = getLinkText(device)
+
+    // only change the level if the vent is not obstructed
+    def currentState = device.currentValue("switch")
+
+    if (currentState == "obstructed") {
+        log.error("cannot set level because ${linkText} is obstructed")
+        return
+    }
+
+    sendEvent(name: "level", value: value)
+    if (value > 0) {
+        sendEvent(name: "switch", value: "on", descriptionText: "${linkText} is on by setting a level")
+    }
+    else {
+        sendEvent(name: "switch", value: "off", descriptionText: "${linkText} is off by setting level to 0")
+    }
+
+    makeLevelCommand(value)
+}
+
+def getOnOff() {
+    log.debug "getOnOff()"
+
+    // disallow on/off updates while vent is obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot update open/close status because ${getLinkText(device)} is obstructed")
+        return []
+    }
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0006 0"]
+}
+
+def getPressure() {
+    log.debug "getPressure()"
+
+    // using a Keen Home specific attribute in the pressure measurement cluster
+    [
+        "zcl mfg-code 0x115B", "delay 200",
+        "zcl global read 0x0403 0x20", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 200"
+    ]
+}
+
+def getLevel() {
+    log.debug "getLevel()"
+
+    // disallow level updates while vent is obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot update level status because ${getLinkText(device)} is obstructed")
+        return []
+    }
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"]
+}
+
+def getTemperature() {
+    log.debug "getTemperature()"
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0402 0"]
+}
+
+def getBattery() {
+    log.debug "getBattery()"
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0001 0x0021"]
+}
+
+def setZigBeeIdTile() {
+    log.debug "setZigBeeIdTile() - ${device.zigbeeId}"
+
+    def linkText = getLinkText(device)
+
+    sendEvent([
+        name: "zigbeeId",
+        value: device.zigbeeId,
+        descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ])
+    return [
+        name: "zigbeeId",
+        value: device.zigbeeId,
+        descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ]
+}
+
+def refresh() {
+    getOnOff() +
+    getLevel() +
+    getTemperature() +
+    getPressure() +
+    getBattery()
+}
+
+def configure() {
+    log.debug "CONFIGURE"
+
+    // get ZigBee ID by hidden tile because that's the only way we can do it
+    setZigBeeIdTile()
+
+    def configCmds = [
+        // bind reporting clusters to hub
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500"
+
+        // configure report commands
+        // zcl global send-me-a-report [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // vent on/off state - type: boolean, change: 1
+        // "zcl global send-me-a-report 6 0 0x10 5 60 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // vent level - type: int8u, change: 1
+        // "zcl global send-me-a-report 8 0 0x20 5 60 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // temperature - type: int16s, change: 0xA = 10 = 0.1C
+        // "zcl global send-me-a-report 0x0402 0 0x29 60 60 {0A00}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // keen home custom pressure (tenths of Pascals) - type: int32u, change: 1 = 0.1Pa
+        // "zcl mfg-code 0x115B", "delay 200",
+        // "zcl global send-me-a-report 0x0403 0x20 0x22 60 60 {010000}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // battery - type: int8u, change: 1
+        // "zcl global send-me-a-report 1 0x21 0x20 60 3600 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+    ]
+
+    return configCmds + refresh()
+}

devicetypes/smartthings/aeon-home-energy-meter-c3.src/aeon-home-energy-meter-c3.groovy

@@ -56,7 +56,7 @@ metadata {
 			state "configure", label: '', action: "configuration.configure", icon: "st.secondary.configure"
 		}
 
-		PLATFORM_graphTile(name: "powerGraph", attribute: "device.power")
+		graphTile(name: "powerGraph", attribute: "device.power")
 
 		main(["power", "energy"])
 		details(["powerGraph", "power", "energy", "reset", "refresh", "configure"])
@@ -68,16 +68,8 @@ metadata {
 // ========================================================
 
 preferences {
-	input name: "graphPrecision", type: "enum", title: "Graph Precision", description: "Daily", required: true, options: PLATFORM_graphPrecisionOptions(), defaultValue: "Daily"
-	input name: "graphType", type: "enum", title: "Graph Type", description: selectedGraphType(), required: false, options: PLATFORM_graphTypeOptions()
-}
-
-def selectedGraphPrecision() {
-	graphPrecision ?: "Daily"
-}
-
-def selectedGraphType() {
-	graphType ?: "line"
+	input name: "graphPrecision", type: "enum", title: "Graph Precision", description: "Daily", required: true, options: graphPrecisionOptions(), defaultValue: "Daily"
+	input name: "graphType", type: "enum", title: "Graph Type", description: "line", required: false, options: graphTypeOptions()
 }
 
 // ========================================================
@@ -91,22 +83,6 @@ mappings {
 			GET: "renderGraph"
 		]
 	}
-	path("/graphDataSizes") { // for testing. remove before publishing
-		action:
-		[
-			GET: "graphDataSizes"
-		]
-	}
-}
-
-def graphDataSizes() { // for testing. remove before publishing
-	state.findAll { k, v -> k.startsWith("measure.") }.inject([:]) { attributes, attributeData ->
-		attributes[attributeData.key] = attributeData.value.inject([:]) { dateTypes, dateTypeData ->
-			dateTypes[dateTypeData.key] = dateTypeData.value.size()
-			dateTypes
-		}
-		attributes
-	}
 }
 
 // ========================================================
@@ -121,8 +97,7 @@ def parse(String description) {
 	}
 	log.debug "Parse returned ${result?.descriptionText}"
 
-	PLATFORM_migrateGraphDataIfNeeded()
-	PLATFORM_storeData(result.name, result.value)
+	storeGraphData(result.name, result.value)
 
 	return result
 }
@@ -176,535 +151,15 @@ def configure() {
 
 def renderGraph() {
 
-	def data = PLATFORM_fetchGraphData(params.attribute)
+	def data = fetchGraphData(params.attribute)
 
 	def totalData = data*.runningSum
 
 	def xValues = data*.unixTime
 
 	def yValues = [
-		Total: [color: "#49a201", data: totalData, type: selectedGraphType()]
+		Total: [color: "#49a201", data: totalData]
 	]
 
-	PLATFORM_renderGraph(attribute: params.attribute, xValues: xValues, yValues: yValues, focus: "Total", label: "Watts")
-}
-
-// TODO: // ========================================================
-// TODO: // PLATFORM CODE !!! DO NOT ALTER !!!
-// TODO: // ========================================================
-
-// ========================================================
-// PLATFORM TILES
-// ========================================================
-
-def PLATFORM_graphTile(Map tileParams) {
-	def cleanAttribute = tileParams.attribute - "device." - "capability."
-	htmlTile([name: tileParams.name, attribute: tileParams.attribute, action: "graph/${cleanAttribute}", width: 3, height: 2] + tileParams)
-}
-
-// ========================================================
-// PLATFORM GRAPH RENDERING
-// ========================================================
-
-private PLATFORM_graphTypeOptions() {
-	[
-		"line", // DEFAULT
-		"spline",
-		"step",
-		"area",
-		"area-spline",
-		"area-step",
-		"bar",
-		"scatter",
-		"pie",
-		"donut",
-		"gauge",
-	]
-}
-
-private PLATFORM_renderGraph(graphParams) {
-
-	String attribute = graphParams.attribute
-	List xValues = graphParams.xValues
-	Map yValues = graphParams.yValues
-	String focus = graphParams.focus ?: ""
-	String label = graphParams.label ?: ""
-
-	/*
-	def xValues = [1, 2]
-
-	def yValues = [
-			High: [type: "spline", data: [5, 6], color: "#bc2323"],
-			Low: [type: "spline", data: [0, 1], color: "#153591"]
-	]
-
-	Available type values:
-	line 	// DEFAULT
-	spline
-	step
-	area
-	area-spline
-	area-step
-	bar
-	scatter
-	pie
-	donut
-	gauge
-
-*/
-
-	def graphData = PLATFORM_buildGraphData(xValues, yValues, label)
-
-	def legendData = yValues*.key
-	def focusJS = focus ? "chart.focus('${focus}')" : "// focus not specified"
-	def flowColumn = focus ?: yValues ? yValues.keySet().first() : null
-
-	def htmlTitle = "${(device.label ?: device.name)} ${attribute.capitalize()} Graph"
-	renderHTML(htmlTitle) { html ->
-		html.head {
-			"""
-			<!-- Load c3.css -->
-			<link href="https://www.dropbox.com/s/m6ptp72cw4nx0sp/c3.css?dl=1" rel="stylesheet" type="text/css">
-
-			<!-- Load d3.js and c3.js -->
-			<script src="https://www.dropbox.com/s/9x22jyfu5qyacpp/d3.v3.min.js?dl=1" charset="utf-8"></script>
-			<script src="https://www.dropbox.com/s/to7dtcn403l7mza/c3.js?dl=1"></script>
-
-			<script>
-			function getDocumentHeight() {
-				var body = document.body;
-				var html = document.documentElement;
-
-				return html.clientHeight;
-			}
-			function getDocumentWidth() {
-				var body = document.body;
-				var html = document.documentElement;
-
-				return html.clientWidth;
-			}
-			</script>
-
-			<style>
-				.legend {
-					position: absolute;
-					width: 80%;
-					padding-left: 15%;
-					z-index: 999;
-					padding-top: 5px;
-				}
-				.legend span {
-					width: ${100 / yValues.size()}%;
-					display: inline-block;
-					text-align: center;
-					cursor: pointer;
-					color: white;
-				}
-			</style>
-			"""
-		}
-		html.body {
-			"""
-			<div class="legend"></div>
-			<div id="chart" style="max-height: 120px; position: relative;"></div>
-
-			<script>
-
-			// Generate the chart
-			var chart = c3.generate(${graphData as grails.converters.JSON});
-
-			// Resize the chart to the size of the device tile
-			chart.resize({height:getDocumentHeight(), width:getDocumentWidth()});
-
-			// Focus data if specified
-			${focusJS}
-
-			// Update the chart when ${attribute} events are received
-			function ${attribute}(evt) {
-				var newValue = ['${flowColumn}'];
-				newValue.push(evt.value);
-
-				var newX = ['x'];
-				newX.push(evt.unixTime);
-
-				chart.flow({
-					columns: [
-						newX,
-						newValue
-					]
-				});
-			}
-
-			// Build the custom legend
-			d3.select('.legend').selectAll('span')
-    		.data(${legendData as grails.converters.JSON})
-  			.enter().append('span')
-    		.attr('data-id', function (id) { return id; })
-    		.html(function (id) { return id; })
-    		.each(function (id) {
-        	d3.select(this).style('background-color', chart.color(id));
-    		})
-    		.on('mouseover', function (id) {
-     	   chart.focus(id);
-    		})
-    		.on('mouseout', function (id) {
-        	chart.revert();
-    		})
-    		.on('click', function (id) {
-        	chart.toggle(id);
-    		});
-
-			</script>
-			"""
-		}
-	}
-}
-
-private PLATFORM_buildGraphData(List xValues, Map yValues, String label = "") {
-
-	/*
-	def xValues = [1, 2]
-
-	def yValues = [
-			High: [type: "spline", data: [5, 6], color: "#bc2323"],
-			Low: [type: "spline", data: [0, 1], color: "#153591"]
-	]
-	*/
-
-	[
-		interaction: [
-			enabled: false
-		],
-		bindto     : '#chart',
-		padding    : [
-			left  : 30,
-			right : 30,
-			bottom: 0,
-			top   : 0
-		],
-		legend     : [
-			show: false,
-//			hide    : false,//(yValues.keySet().size() < 2),
-//			position: 'inset',
-//            inset: [
-//            	anchor: "top-right"
-//            ],
-//            item: [
-//            	onclick: "do nothing" // (yValues.keySet().size() > 1) ? null : "do nothing"
-//            ]
-		],
-		data       : [
-			x      : "x",
-			columns: [(["x"] + xValues)] + yValues.collect { k, v -> [k] + v.data },
-			types  : yValues.inject([:]) { total, current -> total[current.key] = current.value.type; return total },
-			colors : yValues.inject([:]) { total, current -> total[current.key] = current.value.color; return total }
-		],
-		axis       : [
-			x: [
-				type: 'timeseries',
-				tick: [
-					centered: true,
-					culling : [max: 7],
-					fit     : true,
-					format  : PLATFORM_getGraphDateFormat()
-//				format: PLATFORM_getGraphDateFormatFunction() // throws securityException when trying to escape javascript
-				]
-			],
-			y: [
-				label  : label,
-				padding: [
-					top: 50
-				]
-			]
-		]
-	]
-}
-
-private PLATFORM_getGraphDateFormat(dateType = selectedGraphPrecision()) {
-	// https://github.com/mbostock/d3/wiki/Time-Formatting
-	def graphDateFormat
-	switch (dateType) {
-		case "Live":
-			graphDateFormat = "%I:%M" // hour (12-hour clock) as a decimal number [00,12] // AM or PM
-			break
-		case "Hourly":
-			graphDateFormat = "%I %p" // hour (12-hour clock) as a decimal number [00,12] // AM or PM
-			break
-		case "Daily":
-			graphDateFormat = "%a" // abbreviated weekday name
-			break
-		case "Monthly":
-			graphDateFormat = "%b" // abbreviated month name
-			break
-		case "Annually":
-			graphDateFormat = "%y" // year without century as a decimal number [00,99]
-			break
-	}
-	graphDateFormat
-}
-
-private String PLATFORM_getGraphDateFormatFunction(dateType = selectedGraphPrecision()) {
-	def graphDateFunction = "function(date) { return date; }"
-	switch (dateType) {
-		case "Live":
-			graphDateFunction = """
-			function(date) {
-			 return.getMinutes();
-			}
-			"""
-			break;
-		case "Hourly":
-			graphDateFunction = """ function(date) {
-			  var hour = date.getHours();
-			  if (hour == 0) {
-			   return String(/12 am/).substring(1).slice(0,-1);
-			  } else if (hour > 12) {
-			   return hour -12 + String(/ pm/).substring(1).slice(0,-1);
-			  } else {
-			   return hour + String(/ am/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Daily":
-			graphDateFunction = """ function(date) {
-			  var day = date.getDay();
-			  switch(day) {
-			   case 0: return String(/Sun/).substring(1).slice(0,-1);
-			   case 1: return String(/Mon/).substring(1).slice(0,-1);
-			   case 2: return String(/Tue/).substring(1).slice(0,-1);
-			   case 3: return String(/Wed/).substring(1).slice(0,-1);
-			   case 4: return String(/Thu/).substring(1).slice(0,-1);
-			   case 5: return String(/Fri/).substring(1).slice(0,-1);
-			   case 6: return String(/Sat/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Monthly":
-			graphDateFunction = """ function(date) {
-			  var month = date.getMonth();
-			  switch(month) {
-			   case 0: return String(/Jan/).substring(1).slice(0,-1);
-			   case 1: return String(/Feb/).substring(1).slice(0,-1);
-			   case 2: return String(/Mar/).substring(1).slice(0,-1);
-			   case 3: return String(/Apr/).substring(1).slice(0,-1);
-			   case 4: return String(/May/).substring(1).slice(0,-1);
-			   case 5: return String(/Jun/).substring(1).slice(0,-1);
-			   case 6: return String(/Jul/).substring(1).slice(0,-1);
-			   case 7: return String(/Aug/).substring(1).slice(0,-1);
-			   case 8: return String(/Sep/).substring(1).slice(0,-1);
-			   case 9: return String(/Oct/).substring(1).slice(0,-1);
-			   case 10: return String(/Nov/).substring(1).slice(0,-1);
-			   case 11: return String(/Dec/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Annually":
-			graphDateFunction = """
-			function(date) {
-			 return.getFullYear();
-			}
-			"""
-			break
-	}
-	groovy.json.StringEscapeUtils.escapeJavaScript(graphDateFunction)
-}
-
-private jsEscapeString(str = "") {
-	"String(/${str}/).substring(1).slice(0,-1);"
-}
-
-private PLATFORM_fetchGraphData(attribute) {
-
-	log.debug "PLATFORM_fetchGraphData(${attribute})"
-
-	/*
-	[
-		[
-			dateString: "2014-12-1",
-			unixTime: 1421931600000,
-			min: 0,
-			max: 10,
-			average: 5
-		],
-		...
-	]
-	*/
-
-	def attributeBucket = state["measure.${attribute}"] ?: [:]
-	def dateType = selectedGraphPrecision()
-	attributeBucket[dateType]
-}
-
-// ========================================================
-// PLATFORM DATA STORAGE
-// ========================================================
-
-private PLATFORM_graphPrecisionOptions() { ["Live", "Hourly", "Daily", "Monthly", "Annually"] }
-
-private PLATFORM_storeData(attribute, value) {
-	PLATFORM_graphPrecisionOptions().each { dateType ->
-		PLATFORM_addDataToBucket(attribute, value, dateType)
-	}
-}
-
-/*
-[
-	Hourly: [
-		[
-			dateString: "2014-12-1",
-			unixTime: 1421931600000,
-			min: 0,
-			max: 10,
-			average: 5
-		],
-		...
-	],
-	...
-]
-*/
-
-private PLATFORM_addDataToBucket(attribute, value, dateType) {
-
-	def numberValue = value.toBigDecimal()
-
-	def attributeKey = "measure.${attribute}"
-	def attributeBucket = state[attributeKey] ?: [:]
-
-	def dateTypeBucket = attributeBucket[dateType] ?: []
-
-	def now = new Date()
-	def itemDateString = now.format("PLATFORM_get${dateType}Format"())
-	def item = dateTypeBucket.find { it.dateString == itemDateString }
-
-	if (!item) {
-		// no entry for this data point yet, fill with initial values
-		item = [:]
-		item.average = numberValue
-		item.runningSum = numberValue
-		item.runningCount = 1
-		item.min = numberValue
-		item.max = numberValue
-		item.unixTime = now.getTime()
-		item.dateString = itemDateString
-
-		// add the new data point
-		dateTypeBucket << item
-
-		// clear out old data points
-		def old = PLATFORM_getOldDateString(dateType)
-		if (old) { // annual data never gets cleared
-			dateTypeBucket.findAll { it.unixTime < old }.each { dateTypeBucket.remove(it) }
-		}
-
-		// limit the size of the bucket. Live data can stack up fast
-		def sizeLimit = 25
-		if (dateTypeBucket.size() > sizeLimit) {
-			dateTypeBucket = dateTypeBucket[-sizeLimit..-1]
-		}
-
-	} else {
-		//re-calculate average/min/max for this bucket
-		item.runningSum = (item.runningSum.toBigDecimal()) + numberValue
-		item.runningCount = item.runningCount.toInteger() + 1
-		item.average = item.runningSum.toBigDecimal() / item.runningCount.toInteger()
-
-		if (item.min == null) {
-			item.min = numberValue
-		} else if (numberValue < item.min.toBigDecimal()) {
-			item.min = numberValue
-		}
-		if (item.max == null) {
-			item.max = numberValue
-		} else if (numberValue > item.max.toBigDecimal()) {
-			item.max = numberValue
-		}
-	}
-
-	attributeBucket[dateType] = dateTypeBucket
-	state[attributeKey] = attributeBucket
-}
-
-private PLATFORM_getOldDateString(dateType) {
-	def now = new Date()
-	def date
-	switch (dateType) {
-		case "Live":
-			date = now.getTime() - 60 * 60 * 1000 // 1h * 60m * 60s * 1000ms // 1 hour
-			break
-		case "Hourly":
-			date = (now - 1).getTime()
-			break
-		case "Daily":
-			date = (now - 10).getTime()
-			break
-		case "Monthly":
-			date = (now - 30).getTime()
-			break
-		case "Annually":
-			break
-	}
-	date
-}
-
-private PLATFORM_getLiveFormat() { "HH:mm:ss" }
-
-private PLATFORM_getHourlyFormat() { "yyyy-MM-dd'T'HH" }
-
-private PLATFORM_getDailyFormat() { "yyyy-MM-dd" }
-
-private PLATFORM_getMonthlyFormat() { "yyyy-MM" }
-
-private PLATFORM_getAnnuallyFormat() { "yyyy" }
-
-// ========================================================
-// PLATFORM GRAPH DATA MIGRATION
-// ========================================================
-
-private PLATFORM_migrateGraphDataIfNeeded() {
-	if (!state.hasMigratedOldGraphData) {
-		def acceptableKeys = PLATFORM_graphPrecisionOptions()
-		def needsMigration = state.findAll { k, v -> v.keySet().findAll { !acceptableKeys.contains(it) } }.keySet()
-		needsMigration.each { PLATFORM_migrateGraphData(it) }
-		state.hasMigratedOldGraphData = true
-	}
-}
-
-private PLATFORM_migrateGraphData(attribute) {
-
-	log.trace "about to migrate ${attribute}"
-
-	def attributeBucket = state[attribute] ?: [:]
-	def migratedAttributeBucket = [:]
-
-	attributeBucket.findAll { k, v -> !PLATFORM_graphPrecisionOptions().contains(k) }.each { oldDateString, oldItem ->
-
-		def dateType = oldDateString.contains('T') ? "Hourly" : PLATFORM_graphPrecisionOptions().find {
-			"PLATFORM_get${it}Format"().size() == oldDateString.size()
-		}
-
-		def dateTypeFormat = "PLATFORM_get${dateType}Format"()
-
-		def newBucket = attributeBucket[dateType] ?: []
-/*
-		def existingNewItem = newBucket.find { it.dateString == oldDateString }
-		if (existingNewItem) {
-			newBucket.remove(existingNewItem)
-		}
-*/
-
-		def newItem = [
-			min         : oldItem.min,
-			max         : oldItem.max,
-			average     : oldItem.average,
-			runningSum  : oldItem.runningSum,
-			runningCount: oldItem.runningCount,
-			dateString  : oldDateString,
-			unixTime    : new Date().parse(dateTypeFormat, oldDateString).getTime()
-		]
-
-		newBucket << newItem
-		migratedAttributeBucket[dateType] = newBucket
-	}
-
-	state[attribute] = migratedAttributeBucket
+	renderGraph(attribute: params.attribute, xValues: xValues, yValues: yValues, focus: "Total", label: "Watts")
 }

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -24,6 +24,8 @@ metadata {
 		capability "Battery"
 
 		attribute "tamper", "enum", ["detected", "clear"]
+		attribute "batteryStatus", "string"
+		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 	}
@@ -63,6 +65,19 @@ metadata {
 		status "wake up" : "command: 8407, payload: "
 	}
 
+	preferences {
+		input description: "Please consult AEOTEC MULTISENSOR 6 operating manual for advanced setting options. You can skip this configuration to use default settings",
+				title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
+
+		input "motionDelayTime", "enum", title: "Motion Sensor Delay Time",
+				options: ["20 seconds", "40 seconds", "1 minute", "2 minutes", "3 minutes", "4 minutes"], defaultValue: "${motionDelayTime}", displayDuringSetup: true
+
+		input "motionSensitivity", "enum", title: "Motion Sensor Sensitivity", options: ["normal","maximum","minimum"], defaultValue: "${motionSensitivity}", displayDuringSetup: true
+
+		input "reportInterval", "enum", title: "Sensors Report Interval",
+				options: ["8 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${reportInterval}", displayDuringSetup: true
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
@@ -85,53 +100,78 @@ metadata {
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
+
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
 		}
+
+		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
+			state "ultravioletIndex", label:'${currentValue} UV index', unit:""
+		}
+
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
-		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery"])
+		valueTile("batteryStatus", "device.batteryStatus", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "batteryStatus", label:'${currentValue}', unit:""
+		}
+
+		valueTile("powerSupply", "device.powerSupply", height: 2, width: 2, decoration: "flat") {
+			state "powerSupply", label:'${currentValue} powered', backgroundColor:"#ffffff"
+		}
+
+		main(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex"])
+		details(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex", "batteryStatus"])
 	}
 }
 
-def updated()
-{
-	if (state.sec && !isConfigured()) {
-		// in case we miss the SCSR
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
+
+	if (device.latestValue("powerSupply") == "USB Cable") {  //case1: USB powered
 		response(configure())
+	} else if (device.latestValue("powerSupply") == "Battery") {  //case2: battery powered
+		// setConfigured("false") is used by WakeUpNotification
+		setConfigured("false") //wait until the next time device wakeup to send configure command after user change preference
+	} else { //case3: power source is not identified, ask user to properly pair the sensor again
+		log.warn "power source is not identified, check it sensor is powered by USB, if so > configure()"
+		def request = []
+		request << zwave.configurationV1.configurationGet(parameterNumber: 101)
+		response(commands(request))
 	}
 }
 
-def parse(String description)
-{
+def parse(String description) {
+	log.debug "parse() >> description: $description"
 	def result = null
 	if (description.startsWith("Err 106")) {
-		state.sec = 0
+		log.debug "parse() >> Err 106"
 		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
 	} else if (description != "updated") {
+		log.debug "parse() >> zwave.parse(description)"
 		def cmd = zwave.parse(description, [0x31: 5, 0x30: 2, 0x84: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
 	}
-	log.debug "Parsed '${description}' to ${result.inspect()}"
+	log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
 	return result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
+//this notification will be sent only when device is battery powered
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
-
+	def cmds = []
 	if (!isConfigured()) {
-		// we're still in the process of configuring a newly joined device
 		log.debug("late configure")
-		result += response(configure())
+		result << response(configure())
 	} else {
-		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		result << response(cmds)
 	}
 	result
 }
@@ -149,10 +189,29 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-	response(configure())
+	log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
+	state.sec = 1
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
+	state.sec = 1
+	log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
+	def result = [createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true)]
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.info "Executing zwaveEvent 72 (ManufacturerSpecificV2) : 05 (ManufacturerSpecificReport) with cmd: $cmd"
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
@@ -162,11 +221,14 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 		map.value = cmd.batteryLevel
 	}
 	state.lastbatt = now()
-	createEvent(map)
+	result << createEvent(map)
+	if (device.latestValue("powerSupply") != "USB Cable"){
+		result << createEvent(name: "batteryStatus", value: "${map.value} % battery", displayed: false)
+	}
+	result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
-{
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
 	def map = [:]
 	switch (cmd.sensorType) {
 		case 1:
@@ -208,7 +270,6 @@ def motionEvent(value) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	setConfigured()
 	motionEvent(cmd.sensorValue)
 }
 
@@ -225,47 +286,112 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 				result << createEvent(name: "tamper", value: "clear", displayed: false)
 				break
 			case 3:
-				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was moved")
+				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was tampered")
 				break
 			case 7:
 				result << motionEvent(1)
 				break
 		}
 	} else {
+		log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
 		result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
 	}
 	result
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport: $cmd"
+	def result = []
+	def value
+	if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 0) {
+		value = "USB Cable"
+		if (!isConfigured()) {
+			log.debug("ConfigurationReport: configuring device")
+			result << response(configure())
+		}
+		result << createEvent(name: "batteryStatus", value: value, displayed: false)
+		result << createEvent(name: "powerSupply", value: value, displayed: false)
+	}else if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 1) {
+		value = "Battery"
+		result << createEvent(name: "powerSupply", value: value, displayed: false)
+	} else if (cmd.parameterNumber == 101){
+		result << response(configure())
+	}
+	result
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "General zwaveEvent cmd: ${cmd}"
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
-	if (device.device.rawDescription =~ /98/ && !state.sec) {
-		log.debug "Multi 6 not sending configure until secure"
-		return []
-	}
-	log.debug "Multi 6 configure()"
-	def request = [
-		// send no-motion report 20 seconds after motion stops
-		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 20),
+	log.debug "${device.displayName} is configuring its settings"
+	def request = []
 
-		// report every 8 minutes (threshold reports don't work on battery power)
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
+	//1. set association groups for hub
+	request << zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId)
 
-		// report automatically on threshold change
-		zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1),
+	request << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId)
+
+	//2. automatic report flags
+	// param 101 -103 [4 bytes] 128: light sensor, 64 humidity, 32 temperature sensor, 2 ultraviolet sensor, 1 battery sensor -> send command 227 to get all reports
+	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 226) //association group 1
+
+	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1) //association group 2
+
+	//3. no-motion report x seconds after motion stops (default 20 secs)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: timeOptionValueMap[motionDelayTime] ?: 20)
+
+	//4. motionSensitivity 3 levels: 64-normal (default), 127-maximum, 0-minimum
+	request << zwave.configurationV1.configurationSet(parameterNumber: 6, size: 1,
+			scaledConfigurationValue:
+					motionSensitivity == "normal" ? 64 :
+							motionSensitivity == "maximum" ? 127 :
+									motionSensitivity == "minimum" ? 0 : 64)
+
+	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+
+	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
+
+	//6. report automatically on threshold change
+	request << zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1)
+
+	//7. query sensor data
+	request << zwave.batteryV1.batteryGet()
+	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x1B) //ultravioletIndex
+
+	setConfigured("true")
 
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C),
-    ]
 	commands(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
-private setConfigured() {
-	updateDataValue("configured", "true")
+private def getTimeOptionValueMap() { [
+		"20 seconds" : 20,
+		"40 seconds" : 40,
+		"1 minute"   : 60,
+		"2 minutes"  : 2*60,
+		"3 minutes"  : 3*60,
+		"4 minutes"  : 4*60,
+		"5 minutes"  : 5*60,
+		"8 minutes"  : 8*60,
+		"15 minutes" : 15*60,
+		"30 minutes" : 30*60,
+		"1 hours"    : 1*60*60,
+		"6 hours"    : 6*60*60,
+		"12 hours"   : 12*60*60,
+		"18 hours"   : 6*60*60,
+		"24 hours"   : 24*60*60,
+]}
+
+private setConfigured(configure) {
+	updateDataValue("configured", configure)
 }
 
 private isConfigured() {
@@ -281,5 +407,6 @@ private command(physicalgraph.zwave.Command cmd) {
 }
 
 private commands(commands, delay=200) {
+	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
 }

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Presence", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Arrival Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Tone"
 		capability "Actuator"
 		capability "Signal Strength"
@@ -31,10 +31,19 @@ metadata {
 		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
 	}
 
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
+				])
+		}
+	}
+
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
 			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -0,0 +1,989 @@
+/**
+ *  Bose SoundTouch
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+// Needed to be able to serialize the XmlSlurper data back to XML
+import groovy.xml.XmlUtil
+
+// for the UI
+metadata {
+    definition (name: "Bose SoundTouch", namespace: "smartthings", author: "SmartThings") {
+        /**
+         * List our capabilties. Doing so adds predefined command(s) which
+         * belong to the capability.
+         */
+        capability "Switch"
+        capability "Refresh"
+        capability "Music Player"
+        capability "Polling"
+
+        /**
+         * Define all commands, ie, if you have a custom action not
+         * covered by a capability, you NEED to define it here or
+         * the call will not be made.
+         *
+         * To call a capability function, just prefix it with the name
+         * of the capability, for example, refresh would be "refresh.refresh"
+         */
+        command "preset1"
+        command "preset2"
+        command "preset3"
+        command "preset4"
+        command "preset5"
+        command "preset6"
+        command "aux"
+
+        command "everywhereJoin"
+        command "everywhereLeave"
+    }
+
+    /**
+     * Define the various tiles and the states that they can be in.
+     * The 2nd parameter defines an event which the tile listens to,
+     * if received, it tries to map it to a state.
+     *
+     * You can also use ${currentValue} for the value of the event
+     * or ${name} for the name of the event. Just make SURE to use
+     * single quotes, otherwise it will only be interpreted at time of
+     * launch, instead of every time the event triggers.
+     */
+    valueTile("nowplaying", "device.nowplaying", width: 2, height: 1, decoration:"flat") {
+        state "nowplaying", label:'${currentValue}', action:"refresh.refresh"
+    }
+
+    standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+    }
+    valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
+        state "station1", label:'${currentValue}', action:"preset1"
+    }
+    valueTile("2", "device.station2", decoration: "flat", canChangeIcon: false) {
+        state "station2", label:'${currentValue}', action:"preset2"
+    }
+    valueTile("3", "device.station3", decoration: "flat", canChangeIcon: false) {
+        state "station3", label:'${currentValue}', action:"preset3"
+    }
+    valueTile("4", "device.station4", decoration: "flat", canChangeIcon: false) {
+        state "station4", label:'${currentValue}', action:"preset4"
+    }
+    valueTile("5", "device.station5", decoration: "flat", canChangeIcon: false) {
+        state "station5", label:'${currentValue}', action:"preset5"
+    }
+    valueTile("6", "device.station6", decoration: "flat", canChangeIcon: false) {
+        state "station6", label:'${currentValue}', action:"preset6"
+    }
+    valueTile("aux", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'Auxillary\nInput', action:"aux"
+    }
+
+    standardTile("refresh", "device.nowplaying", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"refresh", icon:"st.secondary.refresh"
+    }
+
+    controlTile("volume", "device.volume", "slider", height:1, width:3, range:"(0..100)") {
+        state "volume", action:"music Player.setLevel"
+    }
+
+    standardTile("playpause", "device.playpause", decoration: "flat") {
+        state "pause", label:'', icon:'st.sonos.play-btn', action:'music Player.play'
+        state "play", label:'', icon:'st.sonos.pause-btn', action:'music Player.pause'
+    }
+
+    standardTile("prev", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"music Player.previousTrack", icon:"st.sonos.previous-btn"
+    }
+    standardTile("next", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"music Player.nextTrack", icon:"st.sonos.next-btn"
+    }
+
+    valueTile("everywhere", "device.everywhere", width:2, height:1, decoration:"flat") {
+        state "join", label:"Join\nEverywhere", action:"everywhereJoin"
+        state "leave", label:"Leave\nEverywhere", action:"everywhereLeave"
+        // Final state is used if the device is in a state where joining is not possible
+        state "unavailable", label:"Not Available"
+    }
+
+    // Defines which tile to show in the overview
+    main "switch"
+
+    // Defines which tile(s) to show when user opens the detailed view
+    details ([
+        "nowplaying", "refresh",        // Row 1 (112)
+        "prev", "playpause", "next",    // Row 2 (123)
+        "volume",                       // Row 3 (111)
+        "1", "2", "3",                  // Row 4 (123)
+        "4", "5", "6",                  // Row 5 (123)
+        "aux", "everywhere"])           // Row 6 (122)
+}
+
+/**************************************************************************
+ * The following section simply maps the actions as defined in
+ * the metadata into onAction() calls.
+ *
+ * This is preferred since some actions can be dealt with more
+ * efficiently this way. Also keeps all user interaction code in
+ * one place.
+ *
+ */
+def off() { onAction("off") }
+def on() { onAction("on") }
+def volup() { onAction("volup") }
+def voldown() { onAction("voldown") }
+def preset1() { onAction("1") }
+def preset2() { onAction("2") }
+def preset3() { onAction("3") }
+def preset4() { onAction("4") }
+def preset5() { onAction("5") }
+def preset6() { onAction("6") }
+def aux() { onAction("aux") }
+def refresh() { onAction("refresh") }
+def setLevel(level) { onAction("volume", level) }
+def play() { onAction("play") }
+def pause() { onAction("pause") }
+def mute() { onAction("mute") }
+def unmute() { onAction("unmute") }
+def previousTrack() { onAction("previous") }
+def nextTrack() { onAction("next") }
+def everywhereJoin() { onAction("ejoin") }
+def everywhereLeave() { onAction("eleave") }
+/**************************************************************************/
+
+/**
+ * Main point of interaction with things.
+ * This function is called by SmartThings Cloud with the resulting data from
+ * any action (see HubAction()).
+ *
+ * Conversely, to execute any actions, you need to return them as a single
+ * item or a list (flattened).
+ *
+ * @param data Data provided by the cloud
+ * @return an action or a list() of actions. Can also return null if no further
+ *         action is desired at this point.
+ */
+def parse(String event) {
+    def data = parseLanMessage(event)
+    def actions = []
+
+    // List of permanent root node handlers
+    def handlers = [
+        "nowPlaying" : "boseParseNowPlaying",
+        "volume" : "boseParseVolume",
+        "presets" : "boseParsePresets",
+        "zone" : "boseParseEverywhere",
+    ]
+
+    // No need to deal with non-XML data
+    if (!data.headers || !data.headers?."content-type".contains("xml"))
+        return null
+
+    // Move any pending callbacks into ready state
+    prepareCallbacks()
+
+    def xml = new XmlSlurper().parseText(data.body)
+    // Let each parser take a stab at it
+    handlers.each { node,func ->
+        if (xml.name() == node)
+            actions << "$func"(xml)
+    }
+    // If we have callbacks waiting for this...
+    actions << processCallbacks(xml)
+
+    // Be nice and helpful
+    if (actions.size() == 0) {
+        log.warn "parse(): Unhandled data = " + lan
+        return null
+    }
+
+    // Issue new actions
+    return actions.flatten()
+}
+
+/**
+ * Called when the devicetype is first installed.
+ *
+ * @return action(s) to take or null
+ */
+def installed() {
+    onAction("refresh")
+}
+
+/**
+ * Responsible for dealing with user input and taking the
+ * appropiate action.
+ *
+ * @param user The user interaction
+ * @param data Additional data (optional)
+ * @return action(s) to take (or null if none)
+ */
+def onAction(String user, data=null) {
+    log.info "onAction(${user})"
+
+    // Keep IP address current (since device may have changed)
+    state.address = parent.resolveDNI2Address(device.deviceNetworkId)
+
+    // Process action
+    def actions = null
+    switch (user) {
+        case "on":
+            actions = boseSetPowerState(true)
+            break
+        case "off":
+            boseSetNowPlaying(null, "STANDBY")
+            actions = boseSetPowerState(false)
+            break
+        case "volume":
+            actions = boseSetVolume(data)
+            break
+        case "aux":
+            boseSetNowPlaying(null, "AUX")
+            boseZoneReset()
+            sendEvent(name:"everywhere", value:"unavailable")
+        case "1":
+        case "2":
+        case "3":
+        case "4":
+        case "5":
+        case "6":
+            actions = boseSetInput(user)
+            break
+        case "refresh":
+            boseSetNowPlaying(null, "REFRESH")
+            actions = [boseRefreshNowPlaying(), boseGetPresets(), boseGetVolume(), boseGetEverywhereState()]
+            break
+        case "play":
+            actions = [boseSetPlayMode(true), boseRefreshNowPlaying()]
+            break
+        case "pause":
+            actions = [boseSetPlayMode(false), boseRefreshNowPlaying()]
+            break
+        case "previous":
+            actions = [boseChangeTrack(-1), boseRefreshNowPlaying()]
+            break
+        case "next":
+            actions = [boseChangeTrack(1), boseRefreshNowPlaying()]
+            break
+        case "mute":
+            actions = boseSetMute(true)
+            break
+        case "unmute":
+            actions = boseSetMute(false)
+            break
+        case "ejoin":
+            actions = boseZoneJoin()
+            break
+        case "eleave":
+            actions = boseZoneLeave()
+            break
+        default:
+            log.error "Unhandled action: " + user
+    }
+
+    // Make sure we don't have nested lists
+    if (actions instanceof List)
+        return actions.flatten()
+    return actions
+}
+
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
+/**
+ * Joins this speaker into the everywhere zone
+ */
+def boseZoneJoin() {
+    def results = []
+    def posts = parent.boseZoneJoin(this)
+
+    for (post in posts) {
+        if (post['endpoint'])
+            results << bosePOST(post['endpoint'], post['body'], post['host'])
+    }
+    sendEvent(name:"everywhere", value:"leave")
+    results << boseRefreshNowPlaying()
+
+    return results
+}
+
+/**
+ * Removes this speaker from the everywhere zone
+ */
+def boseZoneLeave() {
+    def results = []
+    def posts = parent.boseZoneLeave(this)
+
+    for (post in posts) {
+        if (post['endpoint'])
+            results << bosePOST(post['endpoint'], post['body'], post['host'])
+    }
+    sendEvent(name:"everywhere", value:"join")
+    results << boseRefreshNowPlaying()
+
+    return results
+}
+
+/**
+ * Removes this speaker and any children WITHOUT
+ * signaling the speakers themselves. This is needed
+ * in certain cases where we know the user action will
+ * cause the zone to collapse (for example, AUX)
+ */
+def boseZoneReset() {
+    parent.boseZoneReset()
+}
+
+/**
+ * Handles <nowPlaying></nowPlaying> information and can also
+ * perform addtional actions if there is a pending command
+ * stored in the state variable. For example, the power is
+ * handled this way.
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParseNowPlaying(xmlData) {
+    def result = []
+
+    // Perform display update, allow it to add additional commands
+    if (boseSetNowPlaying(xmlData)) {
+        result << boseRefreshNowPlaying()
+    }
+
+    return result
+}
+
+/**
+ * Parses volume data
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParseVolume(xmlData) {
+    def result = []
+
+    sendEvent(name:"volume", value:xmlData.actualvolume.text())
+    sendEvent(name:"mute", value:(Boolean.toBoolean(xmlData.muteenabled.text()) ? "unmuted" : "muted"))
+
+    return result
+}
+
+/**
+ * Parses the result of the boseGetEverywhereState() call
+ *
+ * @param xmlData
+ */
+def boseParseEverywhere(xmlData) {
+    // No good way of detecting the correct state right now
+}
+
+/**
+ * Parses presets and updates the buttons
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParsePresets(xmlData) {
+    def result = []
+
+    state.preset = [:]
+
+    def missing = ["1", "2", "3", "4", "5", "6"]
+    for (preset in xmlData.preset) {
+        def id = preset.attributes()['id']
+        def name = preset.ContentItem.itemName[0].text().replaceAll(~/ +/, "\n")
+        if (name == "##TRANS_SONGS##")
+            name = "Local\nPlaylist"
+        sendEvent(name:"station${id}", value:name)
+        missing = missing.findAll { it -> it != id }
+
+        // Store the presets into the state for recall later
+        state.preset["$id"] = XmlUtil.serialize(preset.ContentItem)
+    }
+
+    for (id in missing) {
+        state.preset["$id"] = null
+        sendEvent(name:"station${id}", value:"Preset $id\n\nNot set")
+    }
+
+    return result
+}
+
+/**
+ * Based on <nowPlaying></nowPlaying>, updates the visual
+ * representation of the speaker
+ *
+ * @param xmlData The nowPlaying info
+ * @param override Provide the source type manually (optional)
+ *
+ * @return true if it would prefer a refresh soon
+ */
+def boseSetNowPlaying(xmlData, override=null) {
+    def needrefresh = false
+    def nowplaying = null
+
+    if (xmlData && xmlData.playStatus) {
+        switch(xmlData.playStatus) {
+            case "BUFFERING_STATE":
+                nowplaying = "Please wait\nBuffering..."
+                needrefresh = true
+                break
+            case "PLAY_STATE":
+                sendEvent(name:"playpause", value:"play")
+                break
+            case "PAUSE_STATE":
+            case "STOP_STATE":
+                sendEvent(name:"playpause", value:"pause")
+                break
+        }
+    }
+
+    // If the previous section didn't handle this, take another stab at it
+    if (!nowplaying) {
+        nowplaying = ""
+        switch (override ? override : xmlData.attributes()['source']) {
+            case "AUX":
+                nowplaying = "Auxiliary Input"
+                break
+            case "AIRPLAY":
+                nowplaying = "Air Play"
+                break
+            case "STANDBY":
+                nowplaying = "Standby"
+                break
+            case "INTERNET_RADIO":
+                nowplaying = "${xmlData.stationName.text()}\n\n${xmlData.description.text()}"
+                break
+            case "REFRESH":
+                nowplaying = "Please wait"
+                break
+            case "SPOTIFY":
+            case "DEEZER":
+            case "PANDORA":
+            case "IHEART":
+                if (xmlData.ContentItem.itemName[0])
+                    nowplaying += "[${xmlData.ContentItem.itemName[0].text()}]\n\n"
+            case "STORED_MUSIC":
+                nowplaying += "${xmlData.track.text()}"
+                if (xmlData.artist)
+                    nowplaying += "\nby\n${xmlData.artist.text()}"
+                if (xmlData.album)
+                    nowplaying += "\n\n(${xmlData.album.text()})"
+                break
+            default:
+                if (xmlData != null)
+                    nowplaying = "${xmlData.ContentItem.itemName[0].text()}"
+                else
+                    nowplaying = "Unknown"
+        }
+    }
+
+    // Some last parsing which only deals with actual data from device
+    if (xmlData) {
+        if (xmlData.attributes()['source'] == "STANDBY") {
+            log.trace "nowPlaying reports standby: " + XmlUtil.serialize(xmlData)
+            sendEvent(name:"switch", value:"off")
+        } else {
+            sendEvent(name:"switch", value:"on")
+        }
+        boseSetPlayerAttributes(xmlData)
+    }
+
+    // Do not allow a standby device or AUX to be master
+    if (!parent.boseZoneHasMaster() && (override ? override : xmlData.attributes()['source']) == "STANDBY")
+        sendEvent(name:"everywhere", value:"unavailable")
+    else if ((override ? override : xmlData.attributes()['source']) == "AUX")
+        sendEvent(name:"everywhere", value:"unavailable")
+    else if (boseGetZone()) {
+        log.info "We're in the zone: " + boseGetZone()
+        sendEvent(name:"everywhere", value:"leave")
+    } else
+        sendEvent(name:"everywhere", value:"join")
+
+    sendEvent(name:"nowplaying", value:nowplaying)
+
+    return needrefresh
+}
+
+/**
+ * Updates the attributes exposed by the music Player capability
+ *
+ * @param xmlData The NowPlaying XML data
+ */
+def boseSetPlayerAttributes(xmlData) {
+    // Refresh attributes
+    def trackText = ""
+    def trackDesc = ""
+    def trackData = [:]
+
+    switch (xmlData.attributes()['source']) {
+        case "STANDBY":
+            trackData["station"] = trackText = trackDesc = "Standby"
+            break
+        case "AUX":
+            trackData["station"] = trackText = trackDesc = "Auxiliary Input"
+            break
+        case "AIRPLAY":
+            trackData["station"] = trackText = trackDesc = "Air Play"
+            break
+        case "SPOTIFY":
+        case "DEEZER":
+        case "PANDORA":
+        case "IHEART":
+        case "STORED_MUSIC":
+            trackText = trackDesc = "${xmlData.track.text()}"
+            trackData["name"] = xmlData.track.text()
+            if (xmlData.artist) {
+                trackText += " by ${xmlData.artist.text()}"
+                trackDesc += " - ${xmlData.artist.text()}"
+                trackData["artist"] = xmlData.artist.text()
+            }
+            if (xmlData.album) {
+                trackText += " (${xmlData.album.text()})"
+                trackData["album"] = xmlData.album.text()
+            }
+            break
+        case "INTERNET_RADIO":
+            trackDesc = xmlData.stationName.text()
+            trackText = xmlData.stationName.text() + ": " + xmlData.description.text()
+            trackData["station"] = xmlData.stationName.text()
+            break
+        default:
+            trackText = trackDesc = xmlData.ContentItem.itemName[0].text()
+    }
+
+    sendEvent(name:"trackDescription", value:trackDesc, descriptionText:trackText)
+}
+
+/**
+ * Queries the state of the "play everywhere" mode
+ *
+ * @return command
+ */
+def boseGetEverywhereState() {
+    return boseGET("/getZone")
+}
+
+/**
+ * Generates a remote key event
+ *
+ * @param key The name of the key
+ *
+ * @return command
+ *
+ * @note It's VITAL that it's done as two requests, or it will ignore the
+ *       the second key info.
+ */
+def boseKeypress(key) {
+    def press = "<key state=\"press\" sender=\"Gabbo\">${key}</key>"
+    def release = "<key state=\"release\" sender=\"Gabbo\">${key}</key>"
+
+    return [bosePOST("/key", press), bosePOST("/key", release)]
+}
+
+/**
+ * Pauses or plays current preset
+ *
+ * @param play If true, plays, else it pauses (depending on preset, may stop)
+ *
+ * @return command
+ */
+def boseSetPlayMode(boolean play) {
+    log.trace "Sending " + (play ? "PLAY" : "PAUSE")
+    return boseKeypress(play ? "PLAY" : "PAUSE")
+}
+
+/**
+ * Sets the volume in a deterministic way.
+ *
+ * @param New volume level, ranging from 0 to 100
+ *
+ * @return command
+ */
+def boseSetVolume(int level) {
+    def result = []
+    int vol = Math.min(100, Math.max(level, 0))
+
+    sendEvent(name:"volume", value:"${vol}")
+
+    return [bosePOST("/volume", "<volume>${vol}</volume>"), boseGetVolume()]
+}
+
+/**
+ * Sets the mute state, unfortunately, for now, we need to query current
+ * state before taking action (no discrete mute/unmute)
+ *
+ * @param mute If true, mutes the system
+ * @return command
+ */
+def boseSetMute(boolean mute) {
+    queueCallback('volume', 'cb_boseSetMute', mute ? 'MUTE' : 'UNMUTE')
+    return boseGetVolume()
+}
+
+/**
+ * Callback for boseSetMute(), checks current state and changes it
+ * if it doesn't match the requested state.
+ *
+ * @param xml The volume XML data
+ * @param mute The new state of mute
+ *
+ * @return command
+ */
+def cb_boseSetMute(xml, mute) {
+    def result = []
+    if ((xml.muteenabled.text() == 'false' && mute == 'MUTE') ||
+        (xml.muteenabled.text() == 'true' && mute == 'UNMUTE'))
+    {
+        result << boseKeypress("MUTE")
+    }
+    log.trace("muteunmute: " + ((mute == "MUTE") ? "unmute" : "mute"))
+    sendEvent(name:"muteunmute", value:((mute == "MUTE") ? "unmute" : "mute"))
+    return result
+}
+
+/**
+ * Refreshes the state of the volume
+ *
+ * @return command
+ */
+def boseGetVolume() {
+    return boseGET("/volume")
+}
+
+/**
+ * Changes the track to either the previous or next
+ *
+ * @param direction > 0 = next track, < 0 = previous track, 0 = no action
+ * @return command
+ */
+def boseChangeTrack(int direction) {
+    if (direction < 0) {
+        return boseKeypress("PREV_TRACK")
+    } else if (direction > 0) {
+        return boseKeypress("NEXT_TRACK")
+    }
+    return []
+}
+
+/**
+ * Sets the input to preset 1-6 or AUX
+ *
+ * @param input The input (one of 1,2,3,4,5,6,aux)
+ *
+ * @return command
+ *
+ * @note If no presets have been loaded, it will first refresh the presets.
+ */
+def boseSetInput(input) {
+    log.info "boseSetInput(${input})"
+    def result = []
+
+    if (!state.preset) {
+        result << boseGetPresets()
+        queueCallback('presets', 'cb_boseSetInput', input)
+    } else {
+        result << cb_boseSetInput(null, input)
+    }
+    return result
+}
+
+/**
+ * Callback used by boseSetInput(), either called directly by
+ * boseSetInput() if we already have presets, or called after
+ * retreiving the presets for the first time.
+ *
+ * @param xml The presets XML data
+ * @param input Desired input
+ *
+ * @return command
+ *
+ * @note Uses KEY commands for AUX, otherwise /select endpoint.
+ *       Reason for this is latency. Since keypresses are done
+ *       in pairs (press + release), you could accidentally change
+ *       the preset if there is a long delay between the two.
+ */
+def cb_boseSetInput(xml, input) {
+    def result = []
+
+    if (input >= "1" && input <= "6" && state.preset["$input"])
+        result << bosePOST("/select", state.preset["$input"])
+    else if (input.toLowerCase() == "aux") {
+        result << boseKeypress("AUX_INPUT")
+    }
+
+    // Horrible workaround... but we need to delay
+    // the update by at least a few seconds...
+    result << boseRefreshNowPlaying(3000)
+    return result
+}
+
+/**
+ * Sets the power state of the bose unit
+ *
+ * @param device The device in-question
+ * @param enable True to power on, false to power off
+ *
+ * @return command
+ *
+ * @note Will first query state before acting since there
+ *       is no discreete call.
+ */
+def boseSetPowerState(boolean enable) {
+    log.info "boseSetPowerState(${enable})"
+    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
+    return boseRefreshNowPlaying()
+}
+
+/**
+ * Callback function used by boseSetPowerState(), is used
+ * to handle the fact that we only have a toggle for power.
+ *
+ * @param xml The XML data from nowPlaying
+ * @param state The requested state
+ *
+ * @return command
+ */
+def cb_boseSetPowerState(xml, state) {
+    def result = []
+    if ( (xml.attributes()['source'] == "STANDBY" && state == "POWERON") ||
+         (xml.attributes()['source'] != "STANDBY" && state == "POWEROFF") )
+    {
+        result << boseKeypress("POWER")
+        if (state == "POWERON") {
+            result << boseRefreshNowPlaying()
+            queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+        }
+    }
+    return result.flatten()
+}
+
+/**
+ * We're sometimes too quick on the draw and get a refreshed nowPlaying
+ * which shows standby (essentially, the device has yet to completely
+ * transition to awake state), so we need to poll a few times extra
+ * to make sure we get it right.
+ *
+ * @param xml The XML data from nowPlaying
+ * @param tries A counter which will decrease, once it reaches zero,
+ *              we give up and assume that whatever we got was correct.
+ * @return command
+ */
+def cb_boseConfirmPowerOn(xml, tries) {
+    def result = []
+    log.warn "boseConfirmPowerOn() attempt #" + tries
+    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+        result << boseRefreshNowPlaying()
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+    }
+    return result
+}
+
+/**
+ * Requests an update on currently playing item(s)
+ *
+ * @param delay If set to non-zero, delays x ms before issuing
+ *
+ * @return command
+ */
+def boseRefreshNowPlaying(delay=0) {
+    if (delay > 0) {
+        return ["delay ${delay}", boseGET("/now_playing")]
+    }
+    return boseGET("/now_playing")
+}
+
+/**
+ * Requests the list of presets
+ *
+ * @return command
+ */
+def boseGetPresets() {
+    return boseGET("/presets")
+}
+
+/**
+ * Utility function, makes GET requests to BOSE device
+ *
+ * @param path What endpoint
+ *
+ * @return command
+ */
+def boseGET(String path) {
+    new physicalgraph.device.HubAction([
+        method: "GET",
+        path: path,
+        headers: [
+            HOST: state.address + ":8090",
+        ]])
+}
+
+/**
+ * Utility function, makes a POST request to the BOSE device with
+ * the provided data.
+ *
+ * @param path What endpoint
+ * @param data What data
+ * @param address Specific ip and port (optional)
+ *
+ * @return command
+ */
+def bosePOST(String path, String data, String address=null) {
+    new physicalgraph.device.HubAction([
+        method: "POST",
+        path: path,
+        body: data,
+        headers: [
+            HOST: address ?: (state.address + ":8090"),
+        ]])
+}
+
+/**
+ * Queues a callback function for when a specific XML root is received
+ * Will execute on subsequent parse() call(s), never on the current
+ * parse() call.
+ *
+ * @param root The root node that this callback should react to
+ * @param func Name of the function
+ * @param param Parameters for function (optional)
+ */
+def queueCallback(String root, String func, param=null) {
+    if (!state.pending)
+        state.pending = [:]
+    if (!state.pending[root])
+        state.pending[root] = []
+    state.pending[root] << ["$func":"$param"]
+}
+
+/**
+ * Transfers the pending callbacks into readiness state
+ * so they can be executed by processCallbacks()
+ *
+ * This is needed to avoid reacting to queueCallbacks() within
+ * the same loop.
+ */
+def prepareCallbacks() {
+    if (!state.pending)
+        return
+    if (!state.ready)
+        state.ready = [:]
+    state.ready << state.pending
+    state.pending = [:]
+}
+
+/**
+ * Executes any ready callback for a specific root node
+ * with associated parameter and then clears that entry.
+ *
+ * If a callback returns data, it's added to a list of
+ * commands which is returned to the caller of this function
+ *
+ * Once a callback has been used, it's removed from the list
+ * of queued callbacks (ie, it executes only once!)
+ *
+ * @param xml The XML data to be examined and delegated
+ * @return list of commands
+ */
+def processCallbacks(xml) {
+    def result = []
+
+    if (!state.ready)
+        return result
+
+    if (state.ready[xml.name()]) {
+        state.ready[xml.name()].each { callback ->
+            callback.each { func, param ->
+                if (func != "func") {
+                    if (param)
+                    result << "$func"(xml, param)
+                    else
+                        result << "$func"(xml)
+                }
+            }
+        }
+        state.ready.remove(xml.name())
+    }
+    return result.flatten()
+}
+
+/**
+ * State managament for the Play Everywhere zone.
+ * This is typically called from the parent.
+ *
+ * A device is either:
+ *
+ * null = Not participating
+ * server = running the show
+ * client = under the control of the server
+ *
+ * @param newstate (see above for types)
+ */
+def boseSetZone(String newstate) {
+    log.debug "boseSetZone($newstate)"
+    state.zone = newstate
+
+    // Refresh our state
+    if (newstate) {
+        sendEvent(name:"everywhere", value:"leave")
+    } else {
+        sendEvent(name:"everywhere", value:"join")
+    }
+}
+
+/**
+ * Used by the Everywhere zone, returns the current state
+ * of zone membership (null, server, client)
+ * This is typically called from the parent.
+ *
+ * @return state
+ */
+def boseGetZone() {
+    return state.zone
+}
+
+/**
+ * Sets the DeviceID of this particular device.
+ *
+ * Needs to be done this way since DNI is not always
+ * the same as DeviceID which is used internally by
+ * BOSE.
+ *
+ * @param devID The DeviceID
+ */
+def boseSetDeviceID(String devID) {
+    state.deviceID = devID
+}
+
+/**
+ * Retrieves the DeviceID for this device
+ *
+ * @return deviceID
+ */
+def boseGetDeviceID() {
+    return state.deviceID
+}
+
+/**
+ * Returns the IP of this device
+ *
+ * @return IP address
+ */
+def getDeviceIP() {
+    return parent.resolveDNI2Address(device.deviceNetworkId)
+}

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -15,6 +15,7 @@
  *	Author: SmartThings
  *	Date: 2013-12-04
  */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 metadata {
 	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
@@ -25,7 +26,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019"
 	}
 
 	// simulator metadata
@@ -40,7 +40,7 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -153,31 +153,37 @@ def refresh()
 //}
 
 def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16) / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+	if (value != null) {
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
 	}
 }
 
 def setHeatingSetpoint(degrees) {
-	def temperatureScale = getTemperatureScale()
-	
-	def degreesInteger = degrees as Integer
-	log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
-	
-	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
-	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+
+		def degreesInteger = Math.round(degrees)
+		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
+	}
 }
 
 def setCoolingSetpoint(degrees) {
-	def degreesInteger = degrees as Integer
-	log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
-	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
-	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
 }
 
 def modes() {

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -38,169 +38,63 @@ metadata {
 	}
 
 	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		
-
-		main(["switch"])
-		details(["switch", "level", "levelSliderControl", "refresh"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
 }
 
 // Parse incoming device messages to generate events
-
 def parse(String description) {
-	log.trace description
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-        
-        if(description?.endsWith("0100") ||description?.endsWith("1001"))
-        {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
         }
-        
-        if(description?.endsWith("0000") || description?.endsWith("1000"))
-        {
-        	def result = createEvent(name: "switch", value: "off")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
-	}
-    
-    
-   if (description?.startsWith("read attr")) {
-   		
-        log.debug description[-2..-1]
-        def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-        
-		sendEvent( name: "level", value: i )
     }
-    
-	
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
 }
 
 def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-    
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-    }
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-    
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
- 
-}
-
-def refresh() {
-    // Schedule poll every 1 min
-    //schedule("0 */1 * * * ?", poll)
-    //poll()
-    
-    [
-	"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0"
-    ]
+    zigbee.on()
 }
 
 def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
+    zigbee.setLevel(value)
+}
 
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {0000 0000}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: value)
-    def level = hex(value * 255/100)
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-	//log.debug cmds
-	cmds
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
-
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
-	def configCmds = [	
-  
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-        
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-        
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def uninstalled() {
-
-	log.debug "uninstalled()"
-		
-	response("zcl rftd")
- 
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -55,141 +55,136 @@ metadata {
 			}
 		}
 
-		standardTile("indicator", "device.indicatorStatus", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("indicator", "device.indicatorStatus", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
 			state "when on", action:"indicator.indicatorNever", icon:"st.indicators.lit-when-on"
 			state "never", action:"indicator.indicatorWhenOff", icon:"st.indicators.never-lit"
 		}
-		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
 		}
 
 		main(["switch"])
-		details(["switch", "refresh", "indicator"])
+		details(["switch", "level", "indicator", "refresh"])
+
 	}
 }
 
 def parse(String description) {
-	def item1 = [
-		canBeCurrentState: false,
-		linkText: getLinkText(device),
-		isStateChange: false,
-		displayed: false,
-		descriptionText: description,
-		value:  description
-	]
-	def result
-	def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-	if (cmd) {
-		result = createEvent(cmd, item1)
+	def result = null
+	if (description != "updated") {
+		log.debug "parse() >> zwave.parse($description)"
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
 	}
-	else {
-		item1.displayed = displayed(description, item1.isStateChange)
-		result = [item1]
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	result
+	return result
 }
 
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value)]
+	if (cmd.value && cmd.value <= 100) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
 	}
-	result
+	return result
 }
 
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd, Map item1) {
-	[]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd, Map item1) {
-	[response(zwave.basicV1.basicGet())]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	result[0].descriptionText = "${item1.linkText} is ${item1.value}"
-	result[0].handlerName = cmd.value ? "statusOn" : "statusOff"
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "digital"
-	}
-	result
-}
-
-def doCreateEvent(physicalgraph.zwave.Command cmd, Map item1) {
-	def result = [item1]
-
-	item1.name = "switch"
-	item1.value = cmd.value ? "on" : "off"
-	item1.handlerName = item1.value
-	item1.descriptionText = "${item1.linkText} was turned ${item1.value}"
-	item1.canBeCurrentState = true
-	item1.isStateChange = isStateChange(device, item1.name, item1.value)
-	item1.displayed = item1.isStateChange
-
-	if (cmd.value >= 5) {
-		def item2 = new LinkedHashMap(item1)
-		item2.name = "level"
-		item2.value = cmd.value as String
-		item2.unit = "%"
-		item2.descriptionText = "${item1.linkText} dimmed ${item2.value} %"
-		item2.canBeCurrentState = true
-		item2.isStateChange = isStateChange(device, item2.name, item2.value)
-		item2.displayed = false
-		result << item2
-	}
-	result
-}
 
 def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport $cmd"
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	createEvent([name: "indicatorStatus", value: value])
 }
 
-def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
-	// Handles any Z-Wave commands we aren't interested in
-	log.debug "UNHANDLED COMMAND $cmd"
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
 }
 
 def on() {
-	log.info "on"
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
 }
 
 def off() {
-	delayBetween ([zwave.basicV1.basicSet(value: 0x00).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
 }
 
 def setLevel(value) {
+	log.debug "setLevel >> value: $value"
 	def valueaux = value as Integer
-	def level = Math.min(valueaux, 99)
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	if (level > 0) {
+		sendEvent(name: "switch", value: "on")
+	} else {
+		sendEvent(name: "switch", value: "off")
+	}
+	sendEvent(name: "level", value: level, unit: "%")
 	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
 def setLevel(value, duration) {
+	log.debug "setLevel >> value: $value, duration: $duration"
 	def valueaux = value as Integer
-	def level = Math.min(valueaux, 99)
+	def level = Math.max(Math.min(valueaux, 99), 0)
 	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format()
+	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
+	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
+				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
 }
 
 def poll() {
@@ -197,21 +192,27 @@ def poll() {
 }
 
 def refresh() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
+	log.debug "refresh() is called"
+	def commands = []
+	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
+	if (getDataValue("MSR") == null) {
+		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	}
+	delayBetween(commands,100)
 }
 
 def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on")
 	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
 def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off")
 	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
 def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never")
 	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 
@@ -222,4 +223,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -0,0 +1,455 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+    definition (name: "Fibaro Smoke Sensor", namespace: "smartthings", author: "SmartThings") {
+        capability "Battery" //attributes: battery
+        capability "Configuration"  //commands: configure()
+        capability "Sensor"
+        capability "Smoke Detector" //attributes: smoke ("detected","clear","tested")
+        capability "Temperature Measurement" //attributes: temperature
+        attribute "tamper", "enum", ["detected", "clear"]
+        attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+    }
+    simulator {
+        //battery
+        for (int i in [0, 5, 10, 15, 50, 99, 100]) {
+            status "battery ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
+                    new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i)
+            ).incomingMessage()
+        }
+        status "battery 100%": "command: 8003, payload: 64"
+        status "battery 5%": "command: 8003, payload: 05"
+        //smoke
+        status "smoke detected": "command: 7105, payload: 01 01"
+        status "smoke clear": "command: 7105, payload: 01 00"
+        status "smoke tested": "command: 7105, payload: 01 03"
+        //temperature
+        for (int i = 0; i <= 100; i += 20) {
+            status "temperature ${i}F": new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
+                    new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1)
+            ).incomingMessage()
+        }
+    }
+    preferences {
+        input description: "After successful installation, please click B-button at the Fibaro Smoke Sensor to update device status and configuration",
+                title: "Instructions", displayDuringSetup: true, type: "paragraph", element: "paragraph"
+        input description: "Enter the menu by press and hold B-button for 3 seconds. Once indicator glows WHITE, release the B-button. Visual indicator will start changing colours in sequence. Press B-button briefly when visual indicator glows GREEN",
+                title: "To check smoke detection state", displayDuringSetup: true, type: "paragraph", element: "paragraph"
+        input description: "Please consult Fibaro Smoke Sensor operating manual for advanced setting options. You can skip this configuration to use default settings",
+                title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
+        input "smokeSensorSensitivity", "enum", title: "Smoke Sensor Sensitivity", options: ["High","Medium","Low"], defaultValue: "${smokeSensorSensitivity}", displayDuringSetup: true
+        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
+                defaultValue: "${zwaveNotificationStatus}", displayDuringSetup: true
+        input "visualIndicatorNotificationStatus", "enum", title: "Visual Indicator Notifications Status",
+                options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
+                defaultValue: "${visualIndicatorNotificationStatus}", displayDuringSetup: true
+        input "soundNotificationStatus", "enum", title: "Sound Notifications Status",
+                options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
+                defaultValue: "${soundNotificationStatus}", displayDuringSetup: true
+        input "temperatureReportInterval", "enum", title: "Temperature Report Interval",
+                options: ["reports inactive", "5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${temperatureReportInterval}", displayDuringSetup: true
+        input "temperatureReportHysteresis", "number", title: "Temperature Report Hysteresis", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
+        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 0 or 2-100 C", range: "0..100", displayDuringSetup: true
+        input "excessTemperatureSignalingInterval", "enum", title: "Excess Temperature Signaling Interval",
+                options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${excessTemperatureSignalingInterval}", displayDuringSetup: true
+        input "lackOfZwaveRangeIndicationInterval", "enum", title: "Lack of Z-Wave Range Indication Interval",
+                options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${lackOfZwaveRangeIndicationInterval}", displayDuringSetup: true
+    }
+    tiles (scale: 2){
+        multiAttributeTile(name:"smoke", type: "lighting", width: 6, height: 4){
+            tileAttribute ("device.smoke", key: "PRIMARY_CONTROL") {
+                attributeState("clear", label:"CLEAR", icon:"st.alarm.smoke.clear", backgroundColor:"#ffffff")
+                attributeState("detected", label:"SMOKE", icon:"st.alarm.smoke.smoke", backgroundColor:"#e86d13")
+                attributeState("tested", label:"TEST", icon:"st.alarm.smoke.test", backgroundColor:"#e86d13")
+                attributeState("replacement required", label:"REPLACE", icon:"st.alarm.smoke.test", backgroundColor:"#FFFF66")
+                attributeState("unknown", label:"UNKNOWN", icon:"st.alarm.smoke.test", backgroundColor:"#ffffff")
+            }
+            tileAttribute ("device.battery", key: "SECONDARY_CONTROL") {
+                attributeState "battery", label:'Battery: ${currentValue}%', unit:"%"
+            }
+        }
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "battery", label:'${currentValue}% battery', unit:"%"
+        }
+        valueTile("temperature", "device.temperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "temperature", label:'${currentValue}°', unit:"C"
+        }
+        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "clear", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
+            state "overheat detected", label:'OVERHEAT DETECTED', backgroundColor:"#ffffff"
+            state "rapid temperature rise", label:'RAPID TEMP RISE', backgroundColor:"#ffffff"
+            state "underheat detected", label:'UNDERHEAT DETECTED', backgroundColor:"#ffffff"
+        }
+        valueTile("tamper", "device.tamper", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "clear", label:'NO TAMPER', backgroundColor:"#ffffff"
+            state "detected", label:'TAMPER DETECTED', backgroundColor:"#ffffff"
+        }
+
+        main "smoke"
+        details(["smoke","temperature"])
+    }
+}
+
+def updated() {
+    log.debug "Updated with settings: ${settings}"
+    setConfigured("false") //wait until the next time device wakeup to send configure command
+}
+
+def parse(String description) {
+    log.debug "parse() >> description: $description"
+    def result = null
+    if (description.startsWith("Err 106")) {
+        log.debug "parse() >> Err 106"
+        result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
+                descriptionText: "This sensor failed to complete the network security key exchange. " +
+                        "If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+    } else if (description != "updated") {
+        log.debug "parse() >> zwave.parse(description)"
+        def cmd = zwave.parse(description, [0x31: 5, 0x71: 3, 0x84: 1])
+        if (cmd) {
+            result = zwaveEvent(cmd)
+        }
+    }
+    log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
+    return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+    log.info "Executing zwaveEvent 86 (VersionV1): 12 (VersionReport) with cmd: $cmd"
+    def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+    updateDataValue("fw", fw)
+    def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+    createEvent(descriptionText: text, isStateChange: false)
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+    def map = [ name: "battery", unit: "%" ]
+    if (cmd.batteryLevel == 0xFF) {
+        map.value = 1
+        map.descriptionText = "${device.displayName} battery is low"
+        map.isStateChange = true
+    } else {
+        map.value = cmd.batteryLevel
+    }
+    setConfigured("true")  //when battery is reported back meaning configuration is done
+    //Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = now()
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationBusy cmd) {
+    def msg = cmd.status == 0 ? "try again later" :
+            cmd.status == 1 ? "try again in $cmd.waitTime seconds" :
+                    cmd.status == 2 ? "request queued" : "sorry"
+    createEvent(displayed: true, descriptionText: "$device.displayName is busy, $msg")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejectedRequest cmd) {
+    createEvent(displayed: true, descriptionText: "$device.displayName rejected the last request")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+    setSecured()
+    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x71: 3, 0x84: 1])
+    if (encapsulatedCommand) {
+        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
+        zwaveEvent(encapsulatedCommand)
+    } else {
+        log.warn "Unable to extract encapsulated cmd from $cmd"
+        createEvent(descriptionText: cmd.toString())
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+    log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
+    setSecured()
+    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
+    if (getDataValue("MSR")?.startsWith("010F-0C02")){
+        response(configure()) //configure device using SmartThings default settings
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
+    log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
+    createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true, displayed: true)
+    //after device securely joined the network, call configure() to config device
+    setSecured()
+    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
+    if (getDataValue("MSR")?.startsWith("010F-0C02")){
+        response(configure()) //configure device using SmartThings default settings
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+    log.info "Executing zwaveEvent 71 (NotificationV3): 05 (NotificationReport) with cmd: $cmd"
+    def result = []
+    if (cmd.notificationType == 7) {
+        switch (cmd.event) {
+            case 0:
+                result << createEvent(name: "tamper", value: "clear", displayed: false)
+                break
+            case 3:
+                result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName casing was opened")
+                break
+        }
+    } else if (cmd.notificationType == 1) { //Smoke Alarm (V2)
+        log.debug "notificationv3.NotificationReport: for Smoke Alarm (V2)"
+        result << smokeAlarmEvent(cmd.event)
+    }  else if (cmd.notificationType == 4) { // Heat Alarm (V2)
+        log.debug "notificationv3.NotificationReport: for Heat Alarm (V2)"
+        result << heatAlarmEvent(cmd.event)
+    } else {
+        log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
+        result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
+    }
+    result
+}
+
+def smokeAlarmEvent(value) {
+    log.debug "smokeAlarmEvent(value): $value"
+    def map = [name: "smoke"]
+    if (value == 1 || value == 2) {
+        map.value = "detected"
+        map.descriptionText = "$device.displayName detected smoke"
+    } else if (value == 0) {
+        map.value = "clear"
+        map.descriptionText = "$device.displayName is clear (no smoke)"
+    } else if (value == 3) {
+        map.value = "tested"
+        map.descriptionText = "$device.displayName smoke alarm test"
+    } else if (value == 4) {
+        map.value = "replacement required"
+        map.descriptionText = "$device.displayName replacement required"
+    } else {
+        map.value = "unknown"
+        map.descriptionText = "$device.displayName unknown event"
+    }
+    createEvent(map)
+}
+
+def heatAlarmEvent(value) {
+    log.debug "heatAlarmEvent(value): $value"
+    def map = [name: "heatAlarm"]
+    if (value == 1 || value == 2) {
+        map.value = "overheat detected"
+        map.descriptionText = "$device.displayName overheat detected"
+    } else if (value == 0) {
+        map.value = "clear"
+        map.descriptionText = "$device.displayName heat alarm cleared (no overheat)"
+    } else if (value == 3 || value == 4) {
+        map.value = "rapid temperature rise"
+        map.descriptionText = "$device.displayName rapid temperature rise"
+    } else if (value == 5 || value == 6) {
+        map.value = "underheat detected"
+        map.descriptionText = "$device.displayName underheat detected"
+    } else {
+        map.value = "unknown"
+        map.descriptionText = "$device.displayName unknown event"
+    }
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+    log.info "Executing zwaveEvent 84 (WakeUpV1): 07 (WakeUpNotification) with cmd: $cmd"
+    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
+    def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
+    def cmds = []
+    /* check MSR = "manufacturerId-productTypeId" to make sure configuration commands are sent to the right model */
+    if (!isConfigured() && getDataValue("MSR")?.startsWith("010F-0C02")) {
+        result << response(configure()) // configure a newly joined device or joined device with preference update
+    } else {
+        //Only ask for battery if we haven't had a BatteryReport in a while
+        if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
+            log.debug("Device has been configured sending >> batteryGet()")
+            cmds << zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format()
+            cmds << "delay 1200"
+        }
+        log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
+        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+        result << response(cmds) //tell device back to sleep
+    }
+    result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+    log.info "Executing zwaveEvent 31 (SensorMultilevelV5): 05 (SensorMultilevelReport) with cmd: $cmd"
+    def map = [:]
+    switch (cmd.sensorType) {
+        case 1:
+            map.name = "temperature"
+            def cmdScale = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+            map.unit = getTemperatureScale()
+            break
+        default:
+            map.descriptionText = cmd.toString()
+    }
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+    log.info "Executing zwaveEvent 5A (DeviceResetLocallyV1) : 01 (DeviceResetLocallyNotification) with cmd: $cmd"
+    createEvent(descriptionText: cmd.toString(), isStateChange: true, displayed: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+    log.info "Executing zwaveEvent 72 (ManufacturerSpecificV2) : 05 (ManufacturerSpecificReport) with cmd: $cmd"
+    log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+    def result = []
+    def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+    updateDataValue("MSR", msr)
+    log.debug "After device is securely joined, send commands to update tiles"
+    result << zwave.batteryV1.batteryGet()
+    result << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
+    result << zwave.wakeUpV1.wakeUpNoMoreInformation()
+    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 5000))]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
+    def result = []
+    if (cmd.nodeId.any { it == zwaveHubNodeId }) {
+        result << createEvent(descriptionText: "$device.displayName is associated in group ${cmd.groupingIdentifier}")
+    } else if (cmd.groupingIdentifier == 1) {
+        result << createEvent(descriptionText: "Associating $device.displayName in group ${cmd.groupingIdentifier}")
+        result << response(zwave.associationV1.associationSet(groupingIdentifier:cmd.groupingIdentifier, nodeId:zwaveHubNodeId))
+    }
+    result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+    log.warn "General zwaveEvent cmd: ${cmd}"
+    createEvent(descriptionText: cmd.toString(), isStateChange: false)
+}
+
+def configure() {
+// This sensor joins as a secure device if you tripple-click the button to include it
+    log.debug "configure() >> isSecured() : ${isSecured()}"
+    if (!isSecured()) {
+        log.debug "Fibaro smoke sensor not sending configure until secure"
+        return []
+    } else {
+        log.info "${device.displayName} is configuring its settings"
+        def request = []
+
+        //1. configure wakeup interval : available: 0, 4200s-65535s, device default 21600s(6hr)
+        request += zwave.wakeUpV1.wakeUpIntervalSet(seconds:6*3600, nodeid:zwaveHubNodeId)
+
+        //2. Smoke Sensitivity 3 levels: 1-HIGH , 2-MEDIUM (default), 3-LOW
+        if (smokeSensorSensitivity && smokeSensorSensitivity != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1,
+                    scaledConfigurationValue:
+                            smokeSensorSensitivity == "High" ? 1 :
+                                    smokeSensorSensitivity == "Medium" ? 2 :
+                                            smokeSensorSensitivity == "Low" ? 3 : 2)
+        }
+        //3. Z-Wave notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable
+        if (zwaveNotificationStatus && zwaveNotificationStatus != "null"){
+            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: notificationOptionValueMap[zwaveNotificationStatus] ?: 0)
+        }
+        //4. Visual indicator notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
+        if (visualIndicatorNotificationStatus && visualIndicatorNotificationStatus != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: notificationOptionValueMap[visualIndicatorNotificationStatus] ?: 0)
+        }
+        //5. Sound notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
+        if (soundNotificationStatus && soundNotificationStatus != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: notificationOptionValueMap[soundNotificationStatus] ?: 0)
+        }
+        //6. Temperature report interval: 0-report inactive, 1-8640 (multiply by 10 secs) [10s-24hr], default 180 (30 minutes)
+        if (temperatureReportInterval && temperatureReportInterval != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 20, size: 2, scaledConfigurationValue: timeOptionValueMap[temperatureReportInterval] ?: 180)
+        } else { //send SmartThings default configuration
+            request += zwave.configurationV1.configurationSet(parameterNumber: 20, size: 2, scaledConfigurationValue: 180)
+        }
+        //7. Temperature report hysteresis: 1-100 (in 0.1C step) [0.1C - 10C], default 10 (1 C)
+        if (temperatureReportHysteresis && temperatureReportHysteresis != null) {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 21, size: 1, scaledConfigurationValue: temperatureReportHysteresis < 1 ? 1 : temperatureReportHysteresis > 100 ? 100 : temperatureReportHysteresis)
+        }
+        //8. Temperature threshold: 1-100 (C), default 55 (C)
+        if (temperatureThreshold && temperatureThreshold != null) {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 30, size: 1, scaledConfigurationValue: temperatureThreshold < 1 ? 1 : temperatureThreshold > 100 ? 100 : temperatureThreshold)
+        }
+        //9. Excess temperature signaling interval: 1-8640 (multiply by 10 secs) [10s-24hr], default 180 (30 minutes)
+        if (excessTemperatureSignalingInterval && excessTemperatureSignalingInterval != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 31, size: 2, scaledConfigurationValue: timeOptionValueMap[excessTemperatureSignalingInterval] ?: 180)
+        } else { //send SmartThings default configuration
+            request += zwave.configurationV1.configurationSet(parameterNumber: 31, size: 2, scaledConfigurationValue: 180)
+        }
+        //10. Lack of Z-Wave range indication interval: 1-8640 (multiply by 10 secs) [10s-24hr], default 2160 (6 hours)
+        if (lackOfZwaveRangeIndicationInterval && lackOfZwaveRangeIndicationInterval != "null") {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 32, size: 2, scaledConfigurationValue: timeOptionValueMap[lackOfZwaveRangeIndicationInterval] ?: 2160)
+        } else {
+            request += zwave.configurationV1.configurationSet(parameterNumber: 32, size: 2, scaledConfigurationValue: 2160)
+        }
+        //11. get battery level when device is paired
+        request += zwave.batteryV1.batteryGet()
+
+        //12. get temperature reading from device
+        request += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
+
+        commands(request) + ["delay 10000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+    }
+}
+
+private def getTimeOptionValueMap() { [
+        "5 minutes"  : 30,
+        "15 minutes" : 90,
+        "30 minutes" : 180,
+        "1 hour"     : 360,
+        "6 hours"    : 2160,
+        "12 hours"   : 4320,
+        "18 hours"   : 6480,
+        "24 hours"   : 8640,
+        "reports inactive" : 0,
+]}
+
+private def getNotificationOptionValueMap() { [
+        "disabled" : 0,
+        "casing opened" : 1,
+        "exceeding temperature threshold" : 2,
+        "lack of Z-Wave range" : 4,
+        "all notifications" : 7,
+]}
+
+private command(physicalgraph.zwave.Command cmd) {
+    if (isSecured()) {
+        log.info "Sending secured command: ${cmd}"
+        zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+    } else {
+        log.info "Sending unsecured command: ${cmd}"
+        cmd.format()
+    }
+}
+
+private commands(commands, delay=200) {
+    log.info "inside commands: ${commands}"
+    delayBetween(commands.collect{ command(it) }, delay)
+}
+
+private setConfigured(configure) {
+    updateDataValue("configured", configure)
+}
+private isConfigured() {
+    getDataValue("configured") == "true"
+}
+private setSecured() {
+    updateDataValue("secured", "true")
+}
+private isSecured() {
+    getDataValue("secured") == "true"
+}

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -0,0 +1,887 @@
+/**
+ *	Fidure Thermostat, Based on ZigBee thermostat (SmartThings)
+ *
+ *	Author: Fidure
+ *	Date: 2014-12-13
+ *  Updated: 2015-08-26
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Fidure Thermostat", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Polling"
+
+		attribute "displayTemperature","number"
+		attribute "displaySetpoint", "string"
+		command 	"raiseSetpoint"
+		command 	"lowerSetpoint"
+		attribute "upButtonState", "string"
+		attribute "downButtonState", "string"
+
+		attribute "runningMode", "string"
+    	attribute "lockLevel", "string"
+
+		command "setThermostatTime"
+  		command "lock"
+
+ 		attribute "prorgammingOperation", "number"
+  		attribute "prorgammingOperationDisplay", "string"
+  		command   "Program"
+
+  		attribute "setpointHold", "string"
+		attribute "setpointHoldDisplay", "string"
+		command "Hold"
+  		attribute "holdExpiary", "string"
+
+		attribute "lastTimeSync", "string"
+
+		attribute "thermostatOperatingState", "string"
+
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0201,0204,0B05", outClusters: "000A, 0019"
+
+	}
+
+	// simulator metadata
+	simulator { }
+  // pref
+     preferences {
+
+		input ("hold_time", "enum", title: "Default Hold Time in Hours",
+        description: "Default Hold Duration in hours",
+        range: "1..24", options: ["No Hold", "2 Hours", "4 Hours", "8 Hours", "12 Hours", "1 Day"],
+        displayDuringSetup: false)
+        input ("sync_clock", "boolean", title: "Synchronize Thermostat Clock Automatically?", options: ["Yes","No"])
+        input ("lock_level", "enum", title: "Thermostat Screen Lock Level", options: ["Full","Mode Only", "Setpoint"])
+ 	}
+
+	tiles {
+		valueTile("temperature", "displayTemperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+        [value: 0, color: "#153591"],
+				[value: 7, color: "#1e9cbb"],
+				[value: 15, color: "#90d2a7"],
+				[value: 23, color: "#44b621"],
+				[value: 29, color: "#f1d801"],
+				[value: 35, color: "#d04e00"],
+				[value: 36, color: "#bc2323"],
+									// fahrenheit range
+				[value: 37, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+        ]
+			)
+		}
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+			state "off",   action:"thermostat.setThermostatMode", icon:"st.thermostat.heating-cooling-off"
+			state "cool",  action:"thermostat.setThermostatMode", icon:"st.thermostat.cool"
+			state "heat",  action:"thermostat.setThermostatMode", icon:"st.thermostat.heat"
+			state "auto",  action:"thermostat.setThermostatMode", icon:"st.thermostat.auto"
+		}
+
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.setThermostatFanMode"
+			state "fanOn", label:'${name}', action:"thermostat.setThermostatFanMode"
+		}
+
+    standardTile("hvacStatus", "thermostatOperatingState", inactiveLabel: false, decoration: "flat") {
+				state "Resting",  label: 'Resting'
+				state "Heating",  icon:"st.thermostat.heating"
+				state "Cooling",  icon:"st.thermostat.cooling"
+		}
+
+
+    standardTile("lock", "lockLevel", inactiveLabel: false, decoration: "flat") {
+        state "Unlocked",   action:"lock", label:'${name}'
+        state "Mode Only",  action:"lock", label:'${name}'
+        state "Setpoint",   action:"lock", label:'${name}'
+        state "Full",  action:"lock", label:'${name}'
+    }
+
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false, range: "$min..$max") {
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue}° heat', unit:"F", backgroundColor:"#ffffff"
+		}
+		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false, range: "$min..$max") {
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#1e9cbb"
+		}
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue}° cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("refresh", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+        valueTile("scheduleText", "prorgammingOperation", inactiveLabel: false, decoration: "flat", width: 2) {
+        	state "default", label: 'Schedule'
+    	}
+    	valueTile("schedule", "prorgammingOperationDisplay", inactiveLabel: false, decoration: "flat") {
+        	state "default", action:"Program", label: '${currentValue}'
+    	}
+
+    	valueTile("hold", "setpointHoldDisplay", inactiveLabel: false, decoration: "flat", width: 3) {
+            state "setpointHold", action:"Hold", label: '${currentValue}'
+		}
+
+		valueTile("setpoint", "displaySetpoint", width: 2, height: 2)
+		{
+			state("displaySetpoint", label: '${currentValue}°',
+				backgroundColor: "#919191")
+		}
+
+		standardTile("upButton", "upButtonState", decoration: "flat", inactiveLabel: false) {
+			state "normal", action:"raiseSetpoint", backgroundColor:"#919191", icon:"st.thermostat.thermostat-up"
+			state "pressed", action:"raiseSetpoint", backgroundColor:"#ff0000", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("downButton", "downButtonState", decoration: "flat", inactiveLabel: false) {
+			state "normal", action:"lowerSetpoint", backgroundColor:"#919191", icon:"st.thermostat.thermostat-down"
+			state "pressed", action:"lowerSetpoint", backgroundColor:"#ff9191", icon:"st.thermostat.thermostat-down"
+		}
+
+
+		main "temperature"
+		details([ "temperature", "mode", "hvacStatus","setpoint","upButton","downButton","scheduleText", "schedule", "hold",
+        "heatSliderControl", "heatingSetpoint","coolSliderControl", "coolingSetpoint", "lock", "refresh", "configure"])
+	}
+}
+
+def getMin() {
+	try
+	{
+	if (getTemperatureScale() == "C")
+	 	return 10
+	else
+		return 50
+	} catch (all)
+	{
+		return 10
+	}
+}
+
+def getMax() {
+	try {
+		if (getTemperatureScale() == "C")
+		return 30
+	else
+		return 86
+	} catch (all)
+	{
+		return 86
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def result = []
+
+	if (description?.startsWith("read attr -")) {
+
+		//TODO: Parse RAW strings for multiple attributes
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		for ( atMap in descMap.attrs)
+		{
+			def map = [:]
+
+		  if (descMap.cluster == "0201")
+			{
+				//log.trace "attribute: ${atMap.attrId} "
+                switch(atMap.attrId.toLowerCase())
+				{
+	            case "0000":
+	  						map.name = "temperature"
+	  						map.value = getTemperature(atMap.value)
+								result += createEvent("name":"displayTemperature", "value": getDisplayTemperature(atMap.value))
+	  					break;
+	            case "0005":
+	            //log.debug "hex time: ${descMap.value}"
+	            	if (atMap.encoding ==  "23")
+	                {
+	            	    	map.name = "holdExpiary"
+	                  	map.value = "${convertToTime(atMap.value).getTime()}"
+	                    //log.trace "HOLD EXPIRY: ${atMap.value} is ${map.value}"
+	                    updateHoldLabel("HoldExp", "${map.value}")
+	  				}
+	            break;
+	  				  case "0011":
+	  						map.name = "coolingSetpoint"
+	  						map.value = getDisplayTemperature(atMap.value)
+								updateSetpoint(map.name,map.value)
+	  					break;
+	  					case "0012":
+	  						map.name = "heatingSetpoint"
+	  						map.value = getDisplayTemperature(atMap.value)
+								updateSetpoint(map.name,map.value)
+	  					break;
+	  					case "001c":
+                        	map.name = "thermostatMode"
+	  						map.value = getModeMap()[atMap.value]
+							updateSetpoint(map.name,map.value)
+	  					break;
+							case "001e":   //running mode enum8
+			          			map.name = "runningMode"
+								map.value = getModeMap()[atMap.value]
+								updateSetpoint(map.name,map.value)
+							break;
+	            case "0023":   // setpoint hold enum8
+	            map.name = "setpointHold"
+	            map.value = getHoldMap()[atMap.value]
+	            updateHoldLabel("Hold", map.value)
+	            break;
+	            case "0024":   // hold duration int16u
+	            map.name = "setpointHoldDuration"
+	            map.value = Integer.parseInt("${atMap.value}", 16)
+
+	            break;
+	            case "0025":   // thermostat programming operation bitmap8
+	  					map.name = "prorgammingOperation"
+	                      def val = getProgrammingMap()[Integer.parseInt("${atMap.value}", 16) & 0x01]
+	  					result += createEvent("name":"prorgammingOperationDisplay", "value": val)
+	            map.value = atMap.value
+	  					break;
+	            case "0029":
+								// relay state
+	              map.name = "thermostatOperatingState"
+	              map.value = getThermostatOperatingState(atMap.value)
+	            break;
+	      }
+	    } else if (descMap.cluster == "0204")
+	    {
+	      if (atMap.attrId == "0001")
+	      {
+	  			map.name = "lockLevel"
+                map.value = getLockMap()[atMap.value]
+	      }
+	    }
+
+		 if (map) {
+            result += createEvent(map)
+ 	 	 }
+	  }
+  }
+
+	log.debug "Parse returned $result"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+  def map = (description - "read attr - ").split(",").inject([:]) { map, param ->
+  def nameAndValue = param.split(":")
+  map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+  }
+
+    def attrId = map.get('attrId')
+    def encoding = map.get('encoding')
+    def value = map.get('value')
+    def result = map.get('result')
+    def list = [];
+
+  if (getDataLengthByType(map.get('encoding')) < map.get('value').length()) {
+    def raw = map.get('raw')
+
+    def size = Long.parseLong(''+ map.get('size'), 16)
+    def index = 12;
+    def len
+	
+    //log.trace "processing multi attributes"
+    while((index-12) < size) {
+       attrId = flipHexStringEndianness(raw[index..(index+3)])
+       index+= 4;
+       if (result == "success")
+       index+=2;
+       encoding = raw[index..(index+1)]
+       index+= 2;
+       len =getDataLengthByType(encoding)
+       value = flipHexStringEndianness(raw[index..(index+len-1)])
+       index+=len;
+       list += ['attrId': "$attrId", 'encoding':"$encoding", 'value': "$value"]
+    }
+  }
+  else 
+    list += ['attrId': "$attrId", 'encoding': "$encoding", 'value': "$value"]
+  
+  map.remove('value')
+  map.remove('encoding')
+  map.remove('attrId')
+  map += ['attrs' : list ]
+}
+
+def flipHexStringEndianness(s)
+{
+  s = s.reverse()
+  def sb = new StringBuilder()
+  for (int i=0; i < s.length() -1; i+=2)
+   sb.append(s.charAt(i+1)).append(s.charAt(i))
+  sb
+}
+
+def getDataLengthByType(t)
+{
+	// number of bytes in each static data type
+	 def map = ["08":1,	"09":2,	"0a":3,	"0b":4,	"0c":5,	"0d":6,	"0e":7,	"0f":8,	"10":1,	"18":1,	"19":2,	"1a":3,	"1b":4,
+	 "1c":5,"1d":6,	"1e":7,	"1f":8,	"20":1,	"21":2,	"22":3,	"23":4,	"24":5,	"25":6,	"26":7,	"27":8,	"28":1,	"29":2,
+	 "2a":3,	"2b":4,	"2c":5,	"2d":6,	"2e":7,	"2f":8,	"30":1,	"31":2,	"38":2,	"39":4,	"40":8,	"e0":4,	"e1":4,	"e2":4,
+	 "e8":2,	"e9":2,	"ea":4,	"f0":8,	"f1":16]
+
+	// return number of hex chars
+	 return map.get(t) * 2
+}
+
+
+def getProgrammingMap() { [
+	0:"Off",
+	1:"On"
+]}
+
+def getModeMap() { [
+	"00":"off",
+	"01":"auto",
+	"03":"cool",
+	"04":"heat"
+]}
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+def getHoldMap()
+{[
+	"00":"Off",
+	"01":"On"
+]}
+
+
+def updateSetpoint(attrib, val)
+{
+	def cool = device.currentState("coolingSetpoint")?.value
+	def heat = device.currentState("heatingSetpoint")?.value
+	def runningMode = device.currentState("runningMode")?.value
+	def mode = device.currentState("thermostatMode")?.value
+
+	def value = '--';
+
+
+	if ("heat"  == mode && heat != null)
+		value = heat;
+	else if ("cool"  == mode && cool != null)
+		value = cool;
+    else if ("auto" == mode && runningMode == "cool" && cool != null)
+    	value = cool;
+    else if ("auto" == mode && runningMode == "heat" && heat != null)
+    	value = heat;
+
+	sendEvent("name":"displaySetpoint", "value": value)
+}
+
+def raiseSetpoint()
+{
+	sendEvent("name":"upButtonState", "value": "pressed")
+	sendEvent("name":"upButtonState", "value": "normal")
+	adjustSetpoint(5)
+}
+
+def lowerSetpoint()
+{
+	sendEvent("name":"downButtonState", "value": "pressed")
+	sendEvent("name":"downButtonState", "value": "normal")
+	adjustSetpoint(-5)
+}
+
+def adjustSetpoint(value)
+{
+	def runningMode = device.currentState("runningMode")?.value
+	def mode = device.currentState("thermostatMode")?.value
+
+		//default to both heat and cool
+    def modeData = 0x02
+
+    if ("heat" == mode || "heat" == runningMode)
+    		modeData = "00"
+    else if ("cool" == mode || "cool" == runningMode)
+    	modeData = "01"
+
+    def amountData = String.format("%02X", value)[-2..-1]
+
+
+	"st cmd 0x${device.deviceNetworkId} 1 0x201 0 {" + modeData + " " + amountData + "}"
+
+}
+
+
+def getDisplayTemperature(value)
+{
+	def t = Integer.parseInt("$value", 16);
+
+
+	if (getTemperatureScale() == "C") {
+		t = (((t + 4) / 10) as Integer) / 10;
+	} else {
+		t = ((10 *celsiusToFahrenheit(t/100)) as Integer)/ 10;
+	}
+
+
+	return t;
+}
+
+def updateHoldLabel(attr, value)
+{
+	def currentHold = (device?.currentState("setpointHold")?.value)?: "..."
+
+    def holdExp = device?.currentState("holdExpiary")?.value
+		holdExp = holdExp?: "${(new Date()).getTime()}"
+
+	if ("Hold" == attr)
+    {
+    	currentHold = value
+    }
+
+	    if ("HoldExp" == attr)
+		{
+			holdExp = value
+		}
+		boolean past = ( (new Date(holdExp.toLong()).getTime())  < (new Date().getTime()))
+
+		if ("HoldExp" == attr)
+		{
+  			if (!past)
+				currentHold = "On"
+            else
+				currentHold = "Off"
+    }
+
+	def holdString = (currentHold == "On")?
+			( (past)? "Is On" : "Ends ${compareWithNow(holdExp.toLong())}") :
+			((currentHold == "Off")? " is Off" : " ...")
+
+    sendEvent("name":"setpointHoldDisplay", "value": "Hold ${holdString}")
+}
+
+def getSetPointHoldDuration()
+{
+	def holdTime = 0
+
+    if (settings.hold_time?.contains("Hours"))
+    {
+    	holdTime = Integer.parseInt(settings.hold_time[0..1].trim())
+    }
+    else if (settings.hold_time?.contains("Day"))
+    {
+    	holdTime = Integer.parseInt(settings.hold_time[0..1].trim()) * 24
+    }
+
+    def currentHoldDuration = device.currentState("setpointHoldDuration")?.value
+
+
+    if (Short.parseShort('0'+ (currentHoldDuration?: 0)) != (holdTime * 60))
+    {
+    	[
+        	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x24 0x21 {" +
+            String.format("%04X", ((holdTime * 60) as Short))  // switch to zigbee endian
+
+            + "}", "delay 100",
+			"st rattr 0x${device.deviceNetworkId} 1 0x201 0x24", "delay 200",
+		]
+
+    } else
+    {
+    	[]
+    }
+
+}
+
+def Hold()
+{
+	def currentHold = device.currentState("setpointHold")?.value
+
+	def next = (currentHold == "On") ? "00" : "01"
+	def nextHold = getHoldMap()[next]
+
+	sendEvent("name":"setpointHold", "value":nextHold)
+
+	// set the duration first if it's changed
+
+    [
+    "st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {$next}", "delay 100" ,
+
+    "raw 0x201 {04 21 11 00 00 05 00 }","delay 200",      // hold expiry time
+  	"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+    ] + getSetPointHoldDuration()
+}
+
+def compareWithNow(d)
+{
+	long mins = (new Date(d)).getTime() - (new Date()).getTime()
+
+	mins /= 1000 * 60;
+
+    log.trace "mins: ${mins}"
+
+    boolean past = (mins < 0)
+    def ret = (past)? "" : "in "
+
+    if (past)
+    	mins *= -1;
+
+    float t = 0;
+	// minutes
+	if (mins < 60)
+	{
+			ret +=  (mins as Integer) + " min" + ((mins > 1)? 's' : '')
+	}else if (mins < 1440)
+	{
+		t = ( Math.round((14 + mins)/30) as Integer) / 2
+        ret += t + " hr" +  ((t > 1)? 's' : '')
+	} else
+    {
+		t = (Math.round((359 + mins)/720) as Integer) / 2
+        ret +=  t + " day" + ((t > 1)? 's' : '')
+	}
+    ret += (past)? " ago": ""
+
+    log.trace "ret: ${ret}"
+
+    ret
+}
+
+def convertToTime(data)
+{
+	def time = Integer.parseInt("$data", 16) as long;
+    time *= 1000;
+    time += 946684800000; // 481418694
+    time -= location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
+
+    def d = new Date(time);
+
+	//log.trace "converted $data to Time $d"
+	return d;
+}
+
+def Program()
+{
+   	def currentSched = device.currentState("prorgammingOperation")?.value
+
+    def next = Integer.parseInt(currentSched?: "00", 16);
+    if ( (next & 0x01) == 0x01)
+    	next = next & 0xfe;
+    else
+    	next = next | 0x01;
+
+	def nextSched = getProgrammingMap()[next & 0x01]
+
+    "st wattr 0x${device.deviceNetworkId} 1 0x201 0x25 0x18 {$next}"
+
+}
+
+
+def getThermostatOperatingState(value)
+{
+	String[] m = [ "heating", "cooling", "fan", "Heat2", "Cool2", "Fan2", "Fan3"]
+	String desc = 'idle'
+		value = Integer.parseInt(''+value, 16)
+
+		// only check for 1-stage  for A1730
+	for ( i in 0..2 ) {
+		if (value & 1 << i)
+			desc = m[i]
+	}
+
+	desc
+}
+
+def checkLastTimeSync(delay)
+{
+	def lastSync = device.currentState("lastTimeSync")?.value
+    if (!lastSync)
+    	lastSync = "${new Date(0)}"
+
+    if (settings.sync_clock ?: false && lastSync != new Date(0))
+    	{
+        	sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+    	}
+
+
+
+	long duration = (new Date()).getTime() - (new Date(lastSync)).getTime()
+
+  //  log.debug "check Time: $lastSync duration: ${duration} settings.sync_clock: ${settings.sync_clock}"
+	if (duration > 86400000)
+		{
+			sendEvent("name":"lastTimeSync", "value":"${new Date()}")
+			return setThermostatTime()
+		}
+
+	return []
+}
+
+def readAttributesCommand(cluster, attribList)
+{
+	def attrString = ''
+
+	for ( val in attribList ) {
+    attrString += ' ' + String.format("%02X %02X", val & 0xff , (val >> 8) & 0xff)
+	}
+
+	//log.trace "list: " + attrString
+
+	["raw "+ cluster + " {00 00 00 $attrString}","delay 100",
+	"send 0x${device.deviceNetworkId} 1 1", "delay 100",
+	]
+}
+
+def refresh()
+{
+	log.debug "refresh called"
+     // log.trace "list: " +       readAttributesCommand(0x201, [0x1C,0x1E,0x23])
+      
+        readAttributesCommand(0x201, [0x00,0x11,0x12]) +
+        readAttributesCommand(0x201, [0x1C,0x1E,0x23]) +
+        readAttributesCommand(0x201, [0x24,0x25,0x29]) +
+        [
+	    "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01", "delay 200",  // lock status
+        "raw 0x201 {04 21 11 00 00 05 00 }"                , "delay 500",  // hold expiary
+	    "send 0x${device.deviceNetworkId} 1 1"             , "delay 1500",
+		]  + checkLastTimeSync(2000)
+}
+
+
+
+
+def poll() {
+	log.trace "poll called"
+	refresh()
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt("$value", 16) / 100
+
+	if(getTemperatureScale() == "C"){
+		return celsius as Integer
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+def setHeatingSetpoint(degrees) {
+	def temperatureScale = getTemperatureScale()
+
+	def degreesInteger = degrees as Integer
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
+
+	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
+
+}
+
+def setCoolingSetpoint(degrees) {
+	def degreesInteger = degrees as Integer
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
+	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
+
+}
+
+def modes() {
+	["off", "heat", "cool"]
+}
+
+def setThermostatFanMode() {
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	//log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+def setThermostatMode() {
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+	def index = modeOrder.indexOf(currentMode)
+	def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+
+	setThermostatMode(next)
+}
+
+def setThermostatMode(String next) {
+	def val = (getModeMap().find { it.value == next }?.key)?: "00"
+
+	// log.trace "mode changing to $next sending value: $val"
+    
+	sendEvent("name":"thermostatMode", "value":"$next")
+	["st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {$val}"] +
+    refresh()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def off() {
+	setThermostatMode("off")
+}
+
+def cool() {
+	setThermostatMode("cool")}
+
+def heat() {
+	setThermostatMode("heat")
+}
+
+def auto() {
+	setThermostatMode("auto")
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	 sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {04}"
+}
+
+
+def fanAuto() {
+	 sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def updated()
+{
+	def lastSync = device.currentState("lastTimeSync")?.value
+	if ((settings.sync_clock ?: false) == false)
+			{
+            	log.debug "resetting last sync time.  Used to be: $lastSync"
+                sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+
+      }
+
+}
+
+def getLockMap()
+{[
+  "00":"Unlocked",
+  "01":"Mode Only",
+  "02":"Setpoint",
+  "03":"Full",
+  "04":"Full",
+  "05":"Full",
+
+]}
+def lock()
+{
+
+	def currentLock = device.currentState("lockLevel")?.value
+  def val = getLockMap().find { it.value == currentLock }?.key
+
+
+
+  //log.debug "current lock is: ${val}"
+
+  if (val == "00")
+      val = getLockMap().find { it.value == (settings.lock_level ?: "Full") }?.key
+  else
+      val = "00"
+
+ "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01"
+
+}
+
+
+def setThermostatTime()
+{
+
+  if ((settings.sync_clock ?: false))
+    {
+      log.debug "sync time is disabled, leaving"
+      return []
+    }
+
+
+  	Date date = new Date();
+  	String zone = location.timeZone.getRawOffset() + " DST " + location.timeZone.getDSTSavings();
+
+	long millis = date.getTime(); // Millis since Unix epoch
+  	millis -= 946684800000;  // adjust for ZigBee EPOCH
+  // adjust for time zone and DST offset
+	millis += location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
+	//convert to seconds
+	millis /= 1000;
+
+	// print to a string for hex capture
+  	String s = String.format("%08X", millis);
+	// hex capture for message format
+  	String data = " " + s.substring(6, 8) + " " + s.substring(4, 6) + " " + s.substring(2, 4)+ " " + s.substring(0, 2);
+
+	[
+  	"raw 0x201 {04 21 11 00 02 0f 00 23 ${data} }",
+  	"send 0x${device.deviceNetworkId} 1 ${endpointId}"
+  	]
+}
+
+def configure() {
+
+ 	[
+			"zdo bind 0x${device.deviceNetworkId} 1 1 0x201 {${device.zigbeeId}} {}", "delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0000 0x29 20 300 {19 00}",  // report temperature changes over 0.2C
+  		    "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+            "zcl global send-me-a-report 0x201 0x001C 0x30 10 305 { }",  // mode
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0025 0x18 10 310 { 00 }",  // schedule on/off
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x001E 0x30 10 315 { 00 }",  // running mode
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0011 0x29 10 320 {32 00}",  // cooling setpoint delta: 0.5C (0x3200 in little endian)
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0012 0x29 10 320 {32 00}", // cooling setpoint delta: 0.5C (0x3200 in little endian)
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0029 0x19 10 325 { 00 }", "delay 200",  // relay status
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0023 0x30 10 330 { 00 }", 		// hold
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 1500",
+
+	] + refresh()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private getEndpointId()
+{
+	new BigInteger(device.endpointId, 16).toString()
+}

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Sensor"
         
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
-		fingerprint deviceId: "0x1006", inClusters: "0x25"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 		capability "Switch Level"
         capability "Polling"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
 	}
 
 	// UI tile definitions
@@ -317,7 +317,7 @@ def setLevel(value) {
     state.trigger = "setLevel"
     state.lvl = "${level}"
 
-    if (dimRate) {
+    if (dimRate && (state?.rate != null)) {
     	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} ${state.rate}}"
     }
     else {
@@ -330,8 +330,7 @@ def setLevel(value) {
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [
 
         //Switch Reporting

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -26,8 +26,6 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45852"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45857"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -26,8 +26,6 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "0003, 000A,0019", manufacturer: "Jasco Products", model: "45853"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45856"
 	}
 
 	// simulator metadata

devicetypes/smartthings/harmony-activity.src/harmony-activity.groovy

@@ -0,0 +1,81 @@
+/**
+ *  Logitech Harmony Activity
+ *
+ *  Copyright 2015 Juan Risso
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+        definition (name: "Harmony Activity", namespace: "smartthings", author: "Juan Risso") {
+        capability "Switch"
+        capability "Actuator"
+		capability "Refresh"
+
+        command "huboff"
+        command "alloff"
+        command "refresh"
+	}
+
+	// simulator metadata
+	simulator {
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: 'Off', action: "switch.on", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#ffffff", nextState: "on"
+			state "on", label: 'On', action: "switch.off", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#79b821", nextState: "off"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("forceoff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'Force End', action:"switch.off", icon:"st.secondary.off"
+		}
+		standardTile("huboff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'End Hub Action', action:"huboff", icon:"st.harmony.harmony-hub-icon"
+		}
+		standardTile("alloff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'All Actions', action:"alloff", icon:"st.secondary.off"
+		}
+		main "button"
+		details(["button", "refresh", "forceoff", "huboff", "alloff"])
+	}
+}
+
+def parse(String description) {
+}
+
+def on() {
+	sendEvent(name: "switch", value: "on")
+    log.trace parent.activity(device.deviceNetworkId,"start")
+}
+
+def off() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity(device.deviceNetworkId,"end")
+}
+
+def huboff() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity(device.deviceNetworkId,"hub")
+}
+
+def alloff() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity("all","end")
+}
+
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	log.trace parent.poll()
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -15,19 +15,27 @@ metadata {
 		// TODO: define status and reply messages here
 	}
 
-	tiles {
+	tiles(scale: 2) {
+     	multiAttributeTile(name:"rich-control"){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			}    
+	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
+	            attributeState "default", label:'SN: ${currentValue}'
+			}    
+        }    
 		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
 			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
 		}
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
 		main (["icon"])
-		details(["networkAddress","serialNumber"])
+		details(["rich-control", "networkAddress"])
 	}
 }
 
@@ -36,7 +44,6 @@ def parse(description) {
 	log.debug "Parsing '${description}'"
 	def results = []
 	def result = parent.parse(this, description)
-
 	if (result instanceof physicalgraph.device.HubAction){
 		log.trace "HUE BRIDGE HubAction received -- DOES THIS EVER HAPPEN?"
 		results << result
@@ -44,32 +51,30 @@ def parse(description) {
 		//do nothing
 		log.trace "HUE BRIDGE was updated"
 	} else {
-		log.trace "HUE BRIDGE, OTHER"
 		def map = description
 		if (description instanceof String)  {
 			map = stringToMap(description)
 		}
 		if (map?.name && map?.value) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
-			results << createEvent(name: "${map?.name}", value: "${map?.value}")
-		}
-		else {
-			log.trace "HUE BRIDGE, OTHER"
+			results << createEvent(name: "${map.name}", value: "${map.value}")
+		} else {
+        	log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
 				if (contentType?.contains("json")) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
-						log.warn "NOT PROCESSED: $msg.body"
-					}
-					else {
-						log.debug "HUE BRIDGE, GENERATING BULB LIST EVENT: $bulbs"
-                        sendEvent(name: "bulbList", value: device.hub.id, isStateChange: true, data: bulbs, displayed: false)
+						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+                        if (parent.state.inBulbDiscovery)
+                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
-					log.debug "HUE BRIDGE, SWALLOWING BRIDGE DESCRIPTION RESPONSE -- BRIDGE ALREADY PRESENT"
+					log.debug "HUE BRIDGE ALREADY PRESENT"
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,4 @@
+
 /**
  *  Hue Bulb
  *
@@ -15,49 +16,40 @@ metadata {
 		capability "Sensor"
 
 		command "setAdjustedColor"
-        command "reset"        
-        command "refresh"
+                command "reset"        
+                command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-	standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821"
-		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff"
-	}
-	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"Color Reset", action:"reset", icon:"st.lights.philips.hue-single"
-	}
-	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-	}
-	controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-		state "color", action:"setAdjustedColor"
-	}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-		state "level", action:"switch level.setLevel"
-	}
-	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		state "level", label: 'Level ${currentValue}%'
-	}
-	controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "saturation", action:"color control.setSaturation"
-	}
-	valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-		state "saturation", label: 'Sat ${currentValue}    '
-	}
-	controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "hue", action:"color control.setHue"
-	}
-	valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
-		state "hue", label: 'Hue ${currentValue}   '
+	tiles (scale: 2){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 	}
 
 	main(["switch"])
 	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
-
 }
 
 // parse events into attributes
@@ -76,13 +68,13 @@ def parse(description) {
 }
 
 // handle commands
-def on(transition = "4") {
-	log.trace parent.on(this,transition)
+def on() {
+	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off(transition = "4") {
-	log.trace parent.off(this,transition)
+def off() {
+	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
@@ -115,9 +107,9 @@ def setHue(percent) {
 	sendEvent(name: "hue", value: percent)
 }
 
-def setColor(value,alert = "none",transition = 4) {
+def setColor(value) {
 	log.debug "setColor: ${value}, $this"
-	parent.setColor(this, value, alert, transition)
+	parent.setColor(this, value)
 	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
 	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
 	if (value.hex) { sendEvent(name: "color", value: value.hex)}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -19,24 +19,41 @@ metadata {
 	simulator {
 		// TODO: define status and reply messages here
 	}
+    
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
+        }
+    
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+        
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+           
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }        
 
-	standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821"
-		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff"
-	}
-	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-	}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-		state "level", action:"switch level.setLevel"
-	}
-	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		state "level", label: 'Level ${currentValue}%'
-	}
-
-	main(["switch"])
-	details(["switch", "levelSliderControl", "refresh"])
-
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }    
 }
 
 // parse events into attributes

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -0,0 +1,225 @@
+/**
+ *  LIFX Color Bulb
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+metadata {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+		capability "Actuator"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Switch"
+		capability "Switch Level" // brightness
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+	}
+
+	simulator {
+
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+
+			tileAttribute ("device.model", key: "SECONDARY_CONTROL") {
+				attributeState "model", label: '${currentValue}'
+			}
+		}
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:''
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+			state "colorTemp", label: '${currentValue}K'
+		}
+
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
+}
+
+// handle commands
+def setHue(percentage) {
+	log.debug "setHue ${percentage}"
+	parent.logErrors(logObject: log) {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "hue:${percentage * 3.6}", power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "hue", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setHue result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setSaturation(percentage) {
+	log.debug "setSaturation ${percentage}"
+	parent.logErrors(logObject: log) {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "saturation:${percentage / 100}", power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "saturation", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setSaturation result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColor(Map color) {
+	log.debug "setColor ${color}"
+	def attrs = []
+	def events = []
+	color.each { key, value ->
+		switch (key) {
+			case "hue":
+				attrs << "hue:${value * 3.6}"
+				events << createEvent(name: "hue", value: value)
+				break
+			case "saturation":
+				attrs << "saturation:${value / 100}"
+				events << createEvent(name: "saturation", value: value)
+				break
+			case "colorTemperature":
+				attrs << "kelvin:${value}"
+				events << createEvent(name: "colorTemperature", value: value)
+				break
+		}
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "color", value: color.hex)
+			sendEvent(name: "switch", value: "on")
+			events.each { sendEvent(it) }
+		} else {
+			log.error("Bad setColor result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setLevel(percentage) {
+	log.debug "setLevel ${percentage}"
+	if (percentage < 1 && percentage > 0) {
+		percentage = 1 // clamp to 1%
+	}
+	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
+		return off() // if the brightness is set to 0, just turn it off
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${selector()}/state", ["brightness": percentage / 100, "power": "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColorTemperature(kelvin) {
+	log.debug "Executing 'setColorTemperature' to ${kelvin}"
+	parent.logErrors() {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "colorTemperature", value: kelvin)
+			sendEvent(name: "color", value: "#ffffff")
+			sendEvent(name: "saturation", value: 0)
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+
+	}
+}
+
+def on() {
+	log.debug "Device setOn"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+			sendEvent(name: "switch", value: "on")
+		}
+	}
+}
+
+def off() {
+	log.debug "Device setOff"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+			sendEvent(name: "switch", value: "off")
+		}
+	}
+}
+
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		return []
+	}
+	def data = resp.data[0]
+	log.debug("Data: ${data}")
+
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
+	sendEvent(name: "hue", value: data.color.hue / 3.6)
+	sendEvent(name: "saturation", value: data.color.saturation * 100)
+	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
+
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
+}
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -0,0 +1,155 @@
+/**
+ *  LIFX White Bulb
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+metadata {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+		capability "Actuator"
+		capability "Color Temperature"
+		capability "Switch"
+		capability "Switch Level" // brightness
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+	}
+
+	simulator {
+
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:''
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+			state "colorTemp", label: '${currentValue}K'
+		}
+
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+	}
+
+}
+
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
+}
+
+// handle commands
+def setLevel(percentage) {
+	log.debug "setLevel ${percentage}"
+	if (percentage < 1 && percentage > 0) {
+		percentage = 1 // clamp to 1%
+	}
+	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
+		return off() // if the brightness is set to 0, just turn it off
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [brightness: percentage / 100, power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColorTemperature(kelvin) {
+	log.debug "Executing 'setColorTemperature' to ${kelvin}"
+	parent.logErrors() {
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		if (resp.status < 300) {
+			sendEvent(name: "colorTemperature", value: kelvin)
+			sendEvent(name: "color", value: "#ffffff")
+			sendEvent(name: "saturation", value: 0)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setColorTemperature result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def on() {
+	log.debug "Device setOn"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+			sendEvent(name: "switch", value: "on")
+		}
+	}
+}
+
+def off() {
+	log.debug "Device setOff"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+			sendEvent(name: "switch", value: "off")
+		}
+	}
+}
+
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		return []
+	}
+	def data = resp.data[0]
+
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: data.product.name)
+
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
+}
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -25,7 +25,7 @@ metadata {
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
 			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
-			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ffffff")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
 		}
 		main "presence"
 		details "presence"

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -24,8 +24,8 @@ metadata {
         command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3041"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3043"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3045"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3043", deviceJoinName: "NYCE Ceiling Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3045", deviceJoinName: "NYCE Curtain Motion Sensor"
 	}
 
 	tiles {
@@ -201,10 +201,10 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    	"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+    	"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
         
         "zcl global send-me-a-report 1 0x20 0x20 0x3600 0x3600 {01}", "delay 200",

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,10 +24,10 @@ metadata {
         command "enrollResponse"
  
  
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
  
 	simulator {
@@ -280,7 +280,7 @@ private List parseIasMessage(String description) {
 }
 
 def configure() {
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
 	def configCmds = [
 			//battery reporting and heartbeat
@@ -290,7 +290,7 @@ def configure() {
 
 
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
-			"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -22,10 +22,8 @@ metadata {
 
         command "setAdjustedColor"
 
-
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
-
     }
 
     // simulator metadata

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -5,6 +5,8 @@
     that issue by using state variables
 */
 
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
     definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
 
@@ -20,10 +22,7 @@ metadata {
 
         // indicates that device keeps track of heartbeat (in state.heartbeat)
         attribute "heartbeat", "string"
-
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White"
+        
 
     }
 

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -41,7 +41,7 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -287,7 +287,8 @@ def isDescriptionPower(descMap) {
 	def powerValue = "undefined"
 	if (descMap.cluster == "0B04") {
 		if (descMap.attrId == "050b") {
-			powerValue = convertHexToInt(descMap.value)
+			if(descMap.value!="ffff")
+				powerValue = convertHexToInt(descMap.value)
 		}
 	}
 	else if (descMap.clusterId == "0B04") {
@@ -327,10 +328,9 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0B04 0x050B 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,8 +1,19 @@
 /**
- *	CentraLite Switch
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
  *
  *	Author: SmartThings
- *	Date: 2013-12-02
+ *	Date: 2015-08-23
  */
 metadata {
 	// Automatically generated. Make future change here.
@@ -17,6 +28,9 @@ metadata {
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 
@@ -31,22 +45,33 @@ metadata {
 		reply "zcl on-off off": "on/off: 0"
 	}
 
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+	}
+
 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'
 			}
 		}
-		
+
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
 		main "switch"
 		details(["switch","refresh"])
 	}
@@ -54,67 +79,92 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.debug "Parse description $description"
-	def name = null
-	def value = null
+	log.debug "description is $description"
 
 	// save heartbeat (i.e. last time we got a message from device)
 	state.heartbeat = Calendar.getInstance().getTimeInMillis()
 
-	if (description?.startsWith("read attr -")) {
-		def descMap = parseDescriptionAsMap(description)
-		log.debug "Read attr: $description"
-		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
-			name = "switch"
-			value = descMap.value.endsWith("01") ? "on" : "off"
-		} else if (descMap.cluster.equalsIgnoreCase("0B04") && descMap.attrId.equalsIgnoreCase("050b")) {
-			def reportValue = descMap.value
-			name = "power"
-			//power divisor is 10
-			value = Integer.parseInt(reportValue, 16) / 10
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
 		}
-	} else if (description?.startsWith("on/off:")) {
-		log.debug "Switch command"
-		name = "switch"
-		value = description?.endsWith(" 1") ? "on" : "off"
 	}
-
-	def result = createEvent(name: name, value: value)
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
-// Commands to device
-def on() {
-	'zcl on-off on'
-}
-
 def off() {
-	'zcl on-off off'
+	zigbee.off()
 }
 
-def meter() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+def on() {
+	zigbee.on()
 }
 
 def refresh() {
 	sendEvent(name: "heartbeat", value: "alive", displayed:false)
-	[
-			"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
-	]
+	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
-	def configCmds = [
-			"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-			"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}", "delay 200"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -22,11 +22,11 @@ metadata {
 		capability "Water Sensor"
         
         command "enrollResponse"
- 
- 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S"
-	        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
-       		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu"
+
+
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 
 	}
  
@@ -35,18 +35,27 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+				])
+		}
+		section {
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
 	}
  
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -64,7 +73,7 @@ metadata {
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
 		main (["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
@@ -255,52 +264,51 @@ private Map getMoistureResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	[
-		
-
+	def refreshCmds = [
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [	
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 300 0600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x001 {${device.zigbeeId}} {}", "delay 1000",
-        
-        "raw 0x500 {01 23 00 00 00}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+    [
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
     ]
 }
 
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -35,8 +35,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		standardTile("temperature", "device.temperature", width: 2, height: 2) {
@@ -47,6 +47,7 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
+
 		main (["water", "temperature"])
 		details(["water", "temperature", "battery"])
 	}
@@ -128,6 +129,15 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 	map
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	def map = [:]
+	map.name = "water"
+	map.value = cmd.value ? "wet" : "dry"
+	map.descriptionText = "${device.displayName} is ${map.value}"
+	map
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd)
 {
 	log.debug "COMMAND CLASS: $cmd"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -25,7 +25,7 @@ metadata {
         command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
@@ -37,8 +37,17 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+				])
+		}
+		section {
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
 	}
 
 	tiles(scale: 2) {
@@ -137,10 +146,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-    return Math.round(Double.parseDouble(value))
-}
- 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -226,29 +231,30 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
-    log.debug rawValue
-    
-    def result = [
-    	name: 'battery',
-        value: '--'
-    ]
-    
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
 	def volts = rawValue / 10
 	def descriptionText
-    
-    if (rawValue == 0) {}
-     else {
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+
+	if (rawValue == 0) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
 	}
-	else if (volts > 0){
-		def minVolts = 2.1
-    	def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-	}}
 
 	return result
 }
@@ -280,51 +286,50 @@ private Map getMotionResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "refresh called"
-    [
+	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-		
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    
-   		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x402 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-        "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-        
-        "zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x20 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 1 0x20 0x20 300 3600 {01}", 
-        "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x001 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", 
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}"
-        
- 
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 ${endpointId}"
-        
-    ]
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
 }
 
 private hex(value) {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Battery"
         capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Sensor"
         
         command "enrollResponse"
 
@@ -136,10 +137,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-    return Math.round(Double.parseDouble(value))
-}
- 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -225,22 +222,29 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
-    def result = [
-    	name: 'battery'
-    ]
-    
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
+
+	if (rawValue == 0) {}
 	else {
-		def minVolts = 2.1
-    	def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
 	}
 
 	return result
@@ -273,50 +277,52 @@ private Map getMotionResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "refresh called"
-    [
+	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-		
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    	"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 300 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x001 {${device.zigbeeId}} {}", "delay 1500",
-        
-        "raw 0x500 {01 23 00 00 00}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
     ]
 }
 
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -29,8 +29,9 @@
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S"
-       
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+
+		attribute "status", "string"
  	}
 
  	simulator {
@@ -51,18 +52,36 @@
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
  	preferences {
- 		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+				])
+		}
+		section {
+ 			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		}
+		section {
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+		}
  	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
 				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
 				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
-
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
@@ -90,8 +109,9 @@
  			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
  		}
 
-		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery", "refresh"])
+
+		main(["status", "acceleration", "temperature"])
+		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
 	}
  }
 
@@ -158,10 +178,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-	return Math.round(Double.parseDouble(value))
-}
-
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -202,11 +218,15 @@ private Map parseIasMessage(String description) {
 	Map resultMap = [:]
 	switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
         break
 
         case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
         break
 
         case '0x0022': // Tamper Alarm
@@ -216,11 +236,15 @@ private Map parseIasMessage(String description) {
         break
 
         case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
         break
 
         case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
         break
 
         case '0x0026': // Trouble/Failure
@@ -232,6 +256,29 @@ private Map parseIasMessage(String description) {
     return resultMap
 }
 
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
+		}
+	}
+}
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -291,19 +338,16 @@ def getTemperature(value) {
 		log.debug "Contact"
 		def linkText = getLinkText(device)
 		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-		return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText
-		]
+		sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: value, descriptionText: descriptionText)
 	}
 
 	private getAccelerationResult(numValue) {
 		log.debug "Acceleration"
         def name = "acceleration"
 		def value = numValue.endsWith("1") ? "active" : "inactive"
-		//def linkText = getLinkText(device)
-		def descriptionText = "was $value"
+		def linkText = getLinkText(device)
+		def descriptionText = "$linkText was $value"
 		def isStateChange = isStateChange(device, name, value)
 		[
 			name: name,
@@ -313,77 +357,72 @@ def getTemperature(value) {
 		]
 	}
 
-	def refresh()
-	{
+	def refresh() {
 		log.debug "Refreshing Values "
-		[
+		def refreshCmds = [
         
         /* sensitivity - default value (8) */
         
         "zcl mfg-code 0x104E", "delay 200",
         "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0000", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
+
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0010", "delay 100",
+        "zcl global read 0xFC02 0x0010",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0012", "delay 100",
+        "zcl global read 0xFC02 0x0012",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0013", "delay 100",
+        "zcl global read 0xFC02 0x0013",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0014", "delay 100",
-        "send 0x${device.deviceNetworkId} 1 1"
+        "zcl global read 0xFC02 0x0014",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
+		]
 
-		] 
+		return refreshCmds + enrollResponse()
 	}
 
 	def configure() {
 
-		String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+		String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting"
 		
-        def configCmds = [
-        
-        "zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global write 0x500 0x10 0xf0 {${zigbeeId}}",
+		def configCmds = [
+
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x20 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x402 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
 		"zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0010 0x18 300 3600 {01}",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0012 0x29 300 3600 {01}",
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0013 0x29 300 3600 {01}", 
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0014 0x29 300 3600 {01}", 
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 
 		]
@@ -397,11 +436,14 @@ private getEndpointId() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-	"send 0x${device.deviceNetworkId} 1 1"
-
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
@@ -430,13 +472,33 @@ private Map parseAxis(String description) {
 			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
 			xyzResults.z = signedZ
             log.debug "Z Part: ${signedZ}"
+			if (garageSensor == "Yes")
+				garageEvent(signedZ)
         }
     }
 
 	getXyzResult(xyzResults, description)
 }
 
-
+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
+	}
+}
 
 private Map getXyzResult(results, description) {
 	def name = "threeAxis"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -284,52 +284,59 @@ def getTemperature(value) {
 		]
 	}
 
-	def refresh()
-	{
+	def refresh() {
 		log.debug "Refreshing Temperature and Battery "
-		[
+		def refreshCmds = [
 
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 
 		]
+
+		return refreshCmds + enrollResponse()
 	}
 
-	def configure() {
+def configure() {
 
-		String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-		log.debug "Confuguring Reporting, IAS CIE, and Bindings."
-		def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 0xFC02 2 0x18 300 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
-
-		]
-    return configCmds + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-	"send 0x${device.deviceNetworkId} 1 1"
-
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -260,51 +260,52 @@ private Map getContactResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	[
-    
+	def refreshCmds = [
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-        //"raw 0x500 {01 23 00 00 00}", "delay 200",
-        //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
-    ]
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
 }
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -251,25 +251,21 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
-
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {0100}", "delay 500",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zcl global send-me-a-report 0xFC45 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 1000",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/smartweather-station-tile.src/smartweather-station-tile.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
 
 		attribute "localSunrise", "string"
 		attribute "localSunset", "string"

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
 		capability "Switch Level"

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,5 +1,5 @@
 metadata {
-	definition (name: "Color Control Capability", namespace: "capabilities", author: "SmartThings") {
+	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -270,12 +270,12 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
         
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
         
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -15,6 +15,8 @@
  *  Thanks to Chad Monroe @cmonroe and Patrick Stuart @pstuart
  *
  */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
 	
@@ -25,7 +27,6 @@ metadata {
         capability "Switch"
 		capability "Switch Level"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,FF00", outClusters: "0019"
 	}
 
 	// simulator metadata
@@ -134,8 +135,7 @@ def setLevel(value) {
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [	
   
         //Switch Reporting

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -25,6 +25,8 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
+    attribute "currentIP", "string"
+
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -34,21 +36,36 @@ metadata {
 	// simulator metadata
 	simulator {}
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
-			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
-		}
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
 
-		main "switch"
-		details (["switch", "refresh"])
-	}
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes
@@ -68,6 +85,7 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
+		unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
@@ -78,13 +96,14 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "Notify: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
+			          result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}")
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "GetBinaryResponse: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
+			def dispaux = device.currentValue("switch") != value
+			result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
 		}
 	}
 
@@ -101,14 +120,6 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-    [convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -195,6 +206,8 @@ def subscribe(ip, port) {
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
 		updateDataValue("ip", ip)
+    	def ipvalue = convertHexToIP(getDataValue("ip"))
+        sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -259,6 +272,8 @@ User-Agent: CyberGarage-HTTP/1.0
 
 def poll() {
 log.debug "Executing 'poll'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -274,3 +289,15 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
+
+def setOffline() {
+    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
+}
+
+private Integer convertHexToInt(hex) {
+ 	Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -21,6 +21,8 @@
 		capability "Refresh"
 		capability "Sensor"
 
+    	attribute "currentIP", "string"
+
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -31,17 +33,30 @@
 	}
 
 	// UI tile definitions
-	tiles {
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "motion", canChangeIcon: true){
+            tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+                 attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+                 attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+                 attributeState "offline", label:'${name}', icon:"st.motion.motion.active", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
+
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-		}
-		standardTile("refresh", "device.motion", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+      		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
 		main "motion"
-		details (["motion", "refresh"])
+		details (["rich-control", "refresh"])
 	}
 }
 
@@ -62,6 +77,7 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
+    unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
@@ -72,7 +88,7 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "active" : "inactive"
 			log.debug "Notify - BinaryState = ${value}"
-			result << createEvent(name: "motion", value: value)
+      result << createEvent(name: "motion", value: value, descriptionText: "Motion is ${value}")
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		}
@@ -91,14 +107,6 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -125,6 +133,8 @@ def refresh() {
 ////////////////////////////
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -165,7 +175,9 @@ def subscribe(ip, port) {
 	def existingPort = getDataValue("port")
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
-		updateDataValue("ip", ip)
+        updateDataValue("ip", ip)
+    	def ipvalue = convertHexToIP(getDataValue("ip"))
+    	sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -226,3 +238,15 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Envelope>
 """, physicalgraph.device.Protocol.LAN)
 }
+
+def setOffline() {
+    sendEvent(name: "motion", value: "offline", descriptionText: "The device is offline")
+}
+
+private Integer convertHexToInt(hex) {
+ 	Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -10,120 +10,142 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *	Wemo Switch
+ * Wemo Switch
  *
- *	Author: superuser
- *	Date: 2013-10-11
+ * Author: Juan Risso (SmartThings)
+ * Date: 2015-10-11
  */
  metadata {
-	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
-		capability "Actuator"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Switch"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
 
-		command "subscribe"
-		command "resubscribe"
-		command "unsubscribe"
-	}
+        attribute "currentIP", "string"
 
-	// simulator metadata
-	simulator {}
+        command "subscribe"
+        command "resubscribe"
+        command "unsubscribe"
+ }
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ // simulator metadata
+ simulator {}
 
-		main "switch"
-		details (["switch", "refresh"])
-	}
+ // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
+
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"
+    log.debug "Parsing '${description}'"
 
-	def msg = parseLanMessage(description)
-	def headerString = msg.header
+    def msg = parseLanMessage(description)
+    def headerString = msg.header
 
-	if (headerString?.contains("SID: uuid:")) {
-		def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
-		sid -= "SID: uuid:".trim()
+    if (headerString?.contains("SID: uuid:")) {
+        def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
+        sid -= "SID: uuid:".trim()
 
-		updateDataValue("subscriptionId", sid)
-	}
+        updateDataValue("subscriptionId", sid)
+ 	}
 
-	def result = []
-	def bodyString = msg.body
-	if (bodyString) {
-		def body = new XmlSlurper().parseText(bodyString)
-
-		if (body?.property?.TimeSyncRequest?.text()) {
-			log.trace "Got TimeSyncRequest"
-			result << timeSyncResponse()
-		} else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
-			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
-		} else if (body?.property?.BinaryState?.text()) {
-			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
-			log.trace "Notify: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
-		} else if (body?.property?.TimeZoneNotification?.text()) {
-			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
-		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
-			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
-			log.trace "GetBinaryResponse: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
-		}
-	}
-
-	result
+    def result = []
+    def bodyString = msg.body
+    if (bodyString) {
+    	unschedule("setOffline")
+        def body = new XmlSlurper().parseText(bodyString)
+ 		if (body?.property?.TimeSyncRequest?.text()) {
+        	log.trace "Got TimeSyncRequest"
+        	result << timeSyncResponse()
+        } else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
+ 			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
+ 		} else if (body?.property?.BinaryState?.text()) {
+        	def value = body?.property?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
+        	log.trace "Notify: BinaryState = ${value}, ${body.property.BinaryState}"
+            def dispaux = device.currentValue("switch") != value
+            result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
+        } else if (body?.property?.TimeZoneNotification?.text()) {
+ 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
+ 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
+ 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
+ 			log.trace "GetBinaryResponse: BinaryState = ${value}, ${body.property.BinaryState}"
+            log.info "Connection: ${device.currentValue("connection")}"
+            if (device.currentValue("currentIP") == "Offline") {
+                def ipvalue = convertHexToIP(getDataValue("ip"))
+                sendEvent(name: "IP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+            }
+            def dispaux2 = device.currentValue("switch") != value
+     		result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux2)
+ 		}
+ 	}
+ result
 }
 
 private getTime() {
-	// This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
-	((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
+    // This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
+    ((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
 }
 
 private getCallBackAddress() {
-	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
+ 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
 private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
+ 	Integer.parseInt(hex,16)
 }
 
 private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
 private getHostAddress() {
-	def ip = getDataValue("ip")
-	def port = getDataValue("port")
-
-	if (!ip || !port) {
-		def parts = device.deviceNetworkId.split(":")
-		if (parts.length == 2) {
-			ip = parts[0]
-			port = parts[1]
-		} else {
-			log.warn "Can't figure out ip and port for device: ${device.id}"
-		}
-	}
-	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
-	return convertHexToIP(ip) + ":" + convertHexToInt(port)
+ 	def ip = getDataValue("ip")
+ 	def port = getDataValue("port")
+ 	if (!ip || !port) {
+ 		def parts = device.deviceNetworkId.split(":")
+ 		if (parts.length == 2) {
+ 			ip = parts[0]
+ 			port = parts[1]
+ 		} else {
+ 			log.warn "Can't figure out ip and port for device: ${device.id}"
+		 }
+ 	}
+ 	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
+ 	return convertHexToIP(ip) + ":" + convertHexToInt(port)
 }
 
-
 def on() {
-	log.debug "Executing 'on'"
-    sendEvent(name: "switch", value: "on")
+log.debug "Executing 'on'"
 def turnOn = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
@@ -133,17 +155,16 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
-	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+ <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>1</BinaryState>
-	</m:SetBinaryState>
+ </m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
 def off() {
-	log.debug "Executing 'off'"
-	sendEvent(name: "switch", value: "off")
-	def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
+log.debug "Executing 'off'"
+def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
 Content-Type: text/xml
@@ -152,36 +173,13 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
-	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+ <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>0</BinaryState>
-	</m:SetBinaryState>
+ </m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
-/*def refresh() {
-	log.debug "Executing 'refresh'"
-new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
-SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
-Content-Length: 277
-Content-Type: text/xml; charset="utf-8"
-HOST: ${getHostAddress()}
-User-Agent: CyberGarage-HTTP/1.0
-
-<?xml version="1.0" encoding="utf-8"?>
-<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
-<s:Body>
-<u:GetBinaryState xmlns:u="urn:Belkin:service:basicevent:1">
-</u:GetBinaryState>
-</s:Body>
-</s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}*/
-
-def refresh() {
-	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
-	[subscribe(), timeSyncResponse(), poll()]
-}
-
 def subscribe(hostAddress) {
 log.debug "Executing 'subscribe()'"
 def address = getCallBackAddress()
@@ -200,27 +198,30 @@ def subscribe() {
 	subscribe(getHostAddress())
 }
 
-def subscribe(ip, port) {
-	def existingIp = getDataValue("ip")
-	def existingPort = getDataValue("port")
-	if (ip && ip != existingIp) {
-		log.debug "Updating ip from $existingIp to $ip"
-		updateDataValue("ip", ip)
-	}
-	if (port && port != existingPort) {
-		log.debug "Updating port from $existingPort to $port"
-		updateDataValue("port", port)
-	}
+def refresh() {
+ 	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
+ 	[subscribe(), timeSyncResponse(), poll()]
+}
 
+def subscribe(ip, port) {
+    def existingIp = getDataValue("ip")
+    def existingPort = getDataValue("port")
+    if (ip && ip != existingIp) {
+         log.debug "Updating ip from $existingIp to $ip"
+    	 updateDataValue("ip", ip)
+    	 def ipvalue = convertHexToIP(getDataValue("ip"))
+         sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
+    }
+ 	if (port && port != existingPort) {
+ 		log.debug "Updating port from $existingPort to $port"
+ 		updateDataValue("port", port)
+	}
 	subscribe("${ip}:${port}")
 }
 
-////////////////////////////
 def resubscribe() {
-log.debug "Executing 'resubscribe()'"
-
-def sid = getDeviceDataByName("subscriptionId")
-
+    log.debug "Executing 'resubscribe()'"
+    def sid = getDeviceDataByName("subscriptionId")
 new physicalgraph.device.HubAction("""SUBSCRIBE /upnp/event/basicevent1 HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -228,12 +229,11 @@ TIMEOUT: Second-5400
 
 
 """, physicalgraph.device.Protocol.LAN)
-
 }
 
-////////////////////////////
+
 def unsubscribe() {
-def sid = getDeviceDataByName("subscriptionId")
+    def sid = getDeviceDataByName("subscriptionId")
 new physicalgraph.device.HubAction("""UNSUBSCRIBE publisher path HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -242,7 +242,7 @@ SID: uuid:${sid}
 """, physicalgraph.device.Protocol.LAN)
 }
 
-////////////////////////////
+
 //TODO: Use UTC Timezone
 def timeSyncResponse() {
 log.debug "Executing 'timeSyncResponse()'"
@@ -267,9 +267,15 @@ User-Agent: CyberGarage-HTTP/1.0
 """, physicalgraph.device.Protocol.LAN)
 }
 
+def setOffline() {
+	//sendEvent(name: "currentIP", value: "Offline", displayed: false)
+    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
+}
 
 def poll() {
 log.debug "Executing 'poll'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -0,0 +1,101 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Power Meter"
+        capability "Sensor"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-CIA19NAE26", deviceJoinName: "Sengled Element touch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45852", deviceJoinName: "GE Zigbee Plug-In Dimmer"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45857", deviceJoinName: "GE Zigbee In-Wall Dimmer"
+    }
+
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("power", key: "SECONDARY_CONTROL") {
+                attributeState "power", label:'${currentValue} W'
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
+            def powerValue
+            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(name: "power", value: powerValue)
+            }
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
+}
+
+def on() {
+    zigbee.on()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value)
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
+}

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -11,133 +11,79 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
 metadata {
-	definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Refresh"
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05", outClusters: "0019"
-	}
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+    }
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
-		}
-		main "switch"
-		details(["switch", "refresh", "level", "levelSliderControl"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.info description
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-	}
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
+    log.debug "description is $description"
 
-// Commands to device
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
 }
 
 def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    zigbee.off()
 }
+
+def on() {
+    zigbee.on()
+}
+
 def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-	}
-	else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-        
-	}
-
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-	//log.debug cmds
-	cmds
+    zigbee.setLevel(value)
 }
 
 def refresh() {
-	[
-		"st wattr 0x${device.deviceNetworkId} 1 6 0", "delay 200",
-		"st wattr 0x${device.deviceNetworkId} 1 8 0"
-	]
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
-
-	/*log.debug "binding to switch and level control cluster"
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}"
-	]
-    */
-
-	//set transition time to 2 seconds. Not currently working.
-	"st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {1400}"
-}
-
-
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -0,0 +1,184 @@
+/**
+ *  ZigBee Lock
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ metadata {
+    definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
+    {
+        capability "Actuator"
+        capability "Lock"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Battery"
+        capability "Configuration"
+
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
+                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
+                        manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
+                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
+                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
+    }
+
+    tiles(scale: 2) {
+		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){
+			tileAttribute ("device.lock", key:"PRIMARY_CONTROL") {
+				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
+				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
+				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
+				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
+				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
+			}
+		}
+		standardTile("lock", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+			state "default", label:'lock', action:"lock.lock", icon:"st.locks.lock.locked", nextState:"locking"
+		}
+		standardTile("unlock", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+			state "default", label:'unlock', action:"lock.unlock", icon:"st.locks.lock.unlocked", nextState:"unlocking"
+		}
+		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "toggle"
+		details(["toggle", "lock", "unlock", "battery", "refresh"])
+	}
+}
+
+// Globals
+private getCLUSTER_POWER() { 0x0001 }
+private getCLUSTER_DOORLOCK() { 0x0101 }
+
+private getDOORLOCK_CMD_LOCK_DOOR() { 0x00 }
+private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
+private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
+private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
+// Public methods
+def installed() {
+    log.trace "installed()"
+}
+
+def uninstalled() {
+    log.trace "uninstalled()"
+}
+
+def configure() {
+    /*
+    def cmds =
+        zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
+                           "${TYPE_ENUM8}", 0, 3600, "{01}") +
+        zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
+                           "${TYPE_U8}", 600, 21600, "{01}")
+    */
+    def zigbeeId = device.zigbeeId
+    def cmds =
+        [
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+        ]
+    log.info "configure() --- cmds: $cmds"
+    return cmds + refresh() // send refresh cmds as part of config
+}
+
+def refresh() {
+    def cmds =
+        zigbee.refreshData("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}") +
+        zigbee.refreshData("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}")
+    log.info "refresh() --- cmds: $cmds"
+    return cmds
+}
+
+def parse(String description) {
+    log.trace "parse() --- description: $description"
+
+    Map map = [:]
+    if (description?.startsWith('read attr -')) {
+        map = parseReportAttributeMessage(description)
+    }
+
+    log.debug "parse() --- Parse returned $map"
+    def result = map ? createEvent(map) : null
+    return result
+}
+
+// Lock capability commands
+def lock() {
+    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    log.info "lock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
+}
+
+def unlock() {
+    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    log.info "unlock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
+}
+
+// Private methods
+private Map parseReportAttributeMessage(String description) {
+    log.trace "parseReportAttributeMessage() --- description: $description"
+
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+
+    log.debug "parseReportAttributeMessage() --- descMap: $descMap"
+
+    Map resultMap = [:]
+    if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
+        resultMap.name = "battery"
+        resultMap.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
+        if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
+            resultMap.value = Integer.parseInt(descMap.value, 16)
+        }
+        log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
+    }
+    else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {
+        def value = Integer.parseInt(descMap.value, 16)
+        resultMap.name = "lock"
+        resultMap.putAll([0:["value":"unknown",
+                             "descriptionText":"Not fully locked"],
+                          1:["value":"locked"],
+                          2:["value":"unlocked"]].get(value,
+                                                      ["value":"unknown",
+                                                       "descriptionText":"Unknown lock state"]))
+        log.info "parseReportAttributeMessage() --- lock: ${resultMap.value}"
+    }
+    else {
+        log.debug "parseReportAttributeMessage() --- ignoring attribute"
+    }
+    return resultMap
+}

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -0,0 +1,92 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Power Meter"
+        capability "Sensor"
+        capability "Switch"
+
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+    }
+
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("power", key: "SECONDARY_CONTROL") {
+                attributeState "power", label:'${currentValue} W'
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
+            def powerValue
+            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(name: "power", value: powerValue)
+            }
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
+}
+
+def on() {
+    zigbee.on()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
+}

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -0,0 +1,88 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Switch"
+
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
+}
+
+def on() {
+    zigbee.on()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.onOffConfig()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.onOffRefresh()
+}

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -0,0 +1,134 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  ZigBee White Color Temperature Bulb
+ *
+ *  Author: SmartThings
+ *  Date: 2015-09-22
+ */
+
+metadata {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getKnownDescription(description)
+    if (finalResult) {
+        log.info finalResult
+        if (finalResult.type == "update") {
+            log.info "$device updates: ${finalResult.value}"
+        }
+        else {
+            sendEvent(name: finalResult.type, value: finalResult.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
+}
+
+def on() {
+    zigbee.on()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value)
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value)
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+		capability "Valve"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint deviceId: "0x1006", inClusters: "0x25"
+	}
+
+	// simulator metadata
+	simulator {
+		status "open": "command: 2503, payload: FF"
+		status "close":  "command: 2503, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+
+	// tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#ffe71e"
+				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffe71e"
+			}
+		}
+
+		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "valve"
+		details(["valve","refresh"])
+	}
+
+}
+
+def updated() {
+	response(refresh())
+}
+
+def parse(String description) {
+	log.trace "parse description : $description"
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
+    log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+    def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+    updateDataValue("MSR", msr)
+    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	[:] // Handles all Z-Wave commands we aren't interested in
+}
+
+def open() {
+    delayBetween([
+            zwave.basicV1.basicSet(value: 0xFF).format(),
+            zwave.switchBinaryV1.switchBinaryGet().format()
+    ],10000) //wait for a water valve to be completely opened
+}
+
+def close() {
+    delayBetween([
+            zwave.basicV1.basicSet(value: 0x00).format(),
+            zwave.switchBinaryV1.switchBinaryGet().format()
+    ],10000) //wait for a water valve to be completely closed
+}
+
+def poll() {
+    zwave.switchBinaryV1.switchBinaryGet().format()
+}
+
+def refresh() {
+    log.debug "refresh() is called"
+    def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
+    if (getDataValue("MSR") == null) {
+        commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+    }
+    delayBetween(commands,100)
+}

devicetypes/superuser/switch-too.src/switch-too.groovy

@@ -1,48 +0,0 @@
-/**
- *  Switch Too
- *
- *  Copyright 2015 Bob Florian
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Switch Too", author: "Bob Florian") {
-		capability "Switch"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'switch' attribute
-
-}
-
-// handle commands
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-

devicetypes/zenwithin/zen-thermostat.src/zen-thermostat.groovy

@@ -8,6 +8,7 @@ metadata {
   definition (name: "Zen Thermostat", namespace: "zenwithin", author: "ZenWithin") {
     capability "Actuator"
     capability "Thermostat"
+    capability "Temperature Measurement"
     capability "Configuration"
     capability "Refresh"
     capability "Sensor"

smartapps/com-obycode/obything-music-connect.src/obything-music-connect.groovy

@@ -20,7 +20,8 @@ definition(
     description: "Use this free SmartApp in conjunction with the ObyThing Music app for your Mac to control and automate music and more with iTunes and SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "http://obycode.com/obything/ObyThingSTLogo.png",
-    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png")
+    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png",
+    singleInstance: true)
 
 
 preferences {

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -22,7 +22,8 @@ definition(
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -11,8 +11,13 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *
+ *  
+ *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
+ *  devices for which the user has authorized. Likewise, Initial State's services call this 
+ *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
+ *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
+
 definition(
     name: "Initial State Event Streamer",
     namespace: "initialstate.events",
@@ -28,32 +33,31 @@ import groovy.json.JsonSlurper
 
 preferences {
 	section("Choose which devices to monitor...") {
-        //input "accelerometers", "capability.accelerationSensor", title: "Accelerometers", multiple: true, required: false
+        input "accelerometers", "capability.accelerationSensor", title: "Accelerometers", multiple: true, required: false
         input "alarms", "capability.alarm", title: "Alarms", multiple: true, required: false
-        //input "batteries", "capability.battery", title: "Batteries", multiple: true, required: false
-        //input "beacons", "capability.beacon", title: "Beacons", multiple: true, required: false
-        //input "buttons", "capability.button", title: "Buttons", multiple: true, required: false
-        //input "cos", "capability.carbonMonoxideDetector", title: "Carbon  Monoxide Detectors", multiple: true, required: false
-        //input "colors", "capability.colorControl", title: "Color Controllers", multiple: true, required: false
+        input "batteries", "capability.battery", title: "Batteries", multiple: true, required: false
+        input "beacons", "capability.beacon", title: "Beacons", multiple: true, required: false
+        input "cos", "capability.carbonMonoxideDetector", title: "Carbon  Monoxide Detectors", multiple: true, required: false
+        input "colors", "capability.colorControl", title: "Color Controllers", multiple: true, required: false
         input "contacts", "capability.contactSensor", title: "Contact Sensors", multiple: true, required: false
-        //input "doorsControllers", "capability.doorControl", title: "Door Controllers", multiple: true, required: false
-        //input "energyMeters", "capability.energyMeter", title: "Energy Meters", multiple: true, required: false
-        //input "illuminances", "capability.illuminanceMeasurement", title: "Illuminance Meters", multiple: true, required: false
+        input "doorsControllers", "capability.doorControl", title: "Door Controllers", multiple: true, required: false
+        input "energyMeters", "capability.energyMeter", title: "Energy Meters", multiple: true, required: false
+        input "illuminances", "capability.illuminanceMeasurement", title: "Illuminance Meters", multiple: true, required: false
         input "locks", "capability.lock", title: "Locks", multiple: true, required: false
         input "motions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
-        //input "musicPlayers", "capability.musicPlayer", title: "Music Players", multiple: true, required: false
-        //input "powerMeters", "capability.powerMeter", title: "Power Meters", multiple: true, required: false
+        input "musicPlayers", "capability.musicPlayer", title: "Music Players", multiple: true, required: false
+        input "powerMeters", "capability.powerMeter", title: "Power Meters", multiple: true, required: false
         input "presences", "capability.presenceSensor", title: "Presence Sensors", multiple: true, required: false
         input "humidities", "capability.relativeHumidityMeasurement", title: "Humidity Meters", multiple: true, required: false
-        //input "relaySwitches", "capability.relaySwitch", title: "Relay Switches", multiple: true, required: false
-        //input "sleepSensors", "capability.sleepSensor", title: "Sleep Sensors", multiple: true, required: false
-        //input "smokeDetectors", "capability.smokeDetector", title: "Smoke Detectors", multiple: true, required: false
-        //input "peds", "capability.stepSensor", title: "Pedometers", multiple: true, required: false
+        input "relaySwitches", "capability.relaySwitch", title: "Relay Switches", multiple: true, required: false
+        input "sleepSensors", "capability.sleepSensor", title: "Sleep Sensors", multiple: true, required: false
+        input "smokeDetectors", "capability.smokeDetector", title: "Smoke Detectors", multiple: true, required: false
+        input "peds", "capability.stepSensor", title: "Pedometers", multiple: true, required: false
         input "switches", "capability.switch", title: "Switches", multiple: true, required: false
         input "switchLevels", "capability.switchLevel", title: "Switch Levels", multiple: true, required: false
         input "temperatures", "capability.temperatureMeasurement", title: "Temperature Sensors", multiple: true, required: false
         input "thermostats", "capability.thermostat", title: "Thermostats", multiple: true, required: false
-        //input "valves", "capability.valve", title: "Valves", multiple: true, required: false
+        input "valves", "capability.valve", title: "Valves", multiple: true, required: false
         input "waterSensors", "capability.waterSensor", title: "Water Sensors", multiple: true, required: false
     }
 }
@@ -74,77 +78,71 @@ mappings {
 }
 
 def subscribeToEvents() {
-	/*if (accelerometers != null) {
+	if (accelerometers != null) {
 		subscribe(accelerometers, "acceleration", genericHandler)
-	}*/
+	}
 	if (alarms != null) {
 		subscribe(alarms, "alarm", genericHandler)
 	}
-	/*if (batteries != null) {
+	if (batteries != null) {
 		subscribe(batteries, "battery", genericHandler)
-	}*/
-	/*if (beacons != null) {
+	}
+	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
-	}*/
-	/*
-	if (buttons != null) {
-		subscribe(buttons, "button", genericHandler)
-	}*/
-	/*if (cos != null) {
+	}
+	
+	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
-	}*/
-	/*if (colors != null) {
+	}
+	if (colors != null) {
 		subscribe(colors, "hue", genericHandler)
 		subscribe(colors, "saturation", genericHandler)
 		subscribe(colors, "color", genericHandler)
-	}*/
+	}
 	if (contacts != null) {
 		subscribe(contacts, "contact", genericHandler)
 	}
-	/*if (doorsControllers != null) {
-		subscribe(doorsControllers, "door", genericHandler)
-	}*/
-	/*if (energyMeters != null) {
+	if (energyMeters != null) {
 		subscribe(energyMeters, "energy", genericHandler)
-	}*/
-	/*if (illuminances != null) {
+	}
+	if (illuminances != null) {
 		subscribe(illuminances, "illuminance", genericHandler)
-	}*/
+	}
 	if (locks != null) {
 		subscribe(locks, "lock", genericHandler)
 	}
 	if (motions != null) {
 		subscribe(motions, "motion", genericHandler)
 	}
-	/*if (musicPlayers != null) {
+	if (musicPlayers != null) {
 		subscribe(musicPlayers, "status", genericHandler)
 		subscribe(musicPlayers, "level", genericHandler)
 		subscribe(musicPlayers, "trackDescription", genericHandler)
 		subscribe(musicPlayers, "trackData", genericHandler)
 		subscribe(musicPlayers, "mute", genericHandler)
-	}*/
-	/*if (powerMeters != null) {
+	}
+	if (powerMeters != null) {
 		subscribe(powerMeters, "power", genericHandler)
-	}*/
+	}
 	if (presences != null) {
 		subscribe(presences, "presence", genericHandler)
 	}
 	if (humidities != null) {
 		subscribe(humidities, "humidity", genericHandler)
 	}
-	/*if (relaySwitches != null) {
+	if (relaySwitches != null) {
 		subscribe(relaySwitches, "switch", genericHandler)
-	}*/
-	/*if (sleepSensors != null) {
+	}
+	if (sleepSensors != null) {
 		subscribe(sleepSensors, "sleeping", genericHandler)
-	}*/
-	/*if (smokeDetectors != null) {
+	}
+	if (smokeDetectors != null) {
 		subscribe(smokeDetectors, "smoke", genericHandler)
-	}*/
-	/*if (peds != null) {
+	}
+	if (peds != null) {
 		subscribe(peds, "steps", genericHandler)
 		subscribe(peds, "goal", genericHandler)
-	}*/
+	}
 	if (switches != null) {
 		subscribe(switches, "switch", genericHandler)
 	}
@@ -163,9 +161,9 @@ def subscribeToEvents() {
 		subscribe(thermostats, "thermostatFanMode", genericHandler)
 		subscribe(thermostats, "thermostatOperatingState", genericHandler)
 	}
-	/*if (valves != null) {
+	if (valves != null) {
 		subscribe(valves, "contact", genericHandler)
-	}*/
+	}
 	if (waterSensors != null) {
 		subscribe(waterSensors, "water", genericHandler)
 	}
@@ -173,23 +171,23 @@ def subscribeToEvents() {
 
 def getAccessKey() {
 	log.trace "get access key"
-	if (state.accessKey == null) {
+	if (atomicState.accessKey == null) {
 		httpError(404, "Access Key Not Found")
 	} else {
 		[
-			accessKey: state.accessKey
+			accessKey: atomicState.accessKey
 		]
 	}
 }
 
 def getBucketKey() {
 	log.trace "get bucket key"
-	if (state.bucketKey == null) {
+	if (atomicState.bucketKey == null) {
 		httpError(404, "Bucket key Not Found")
 	} else {
 		[
-			bucketKey: state.bucketKey,
-			bucketName: state.bucketName
+			bucketKey: atomicState.bucketKey,
+			bucketName: atomicState.bucketName
 		]
 	}
 }
@@ -202,53 +200,94 @@ def setBucketKey() {
 	log.debug "bucket name: $newBucketName"
 	log.debug "bucket key: $newBucketKey"
 
-	if (newBucketKey && (newBucketKey != state.bucketKey || newBucketName != state.bucketName)) {
-		state.bucketKey = "$newBucketKey"
-		state.bucketName = "$newBucketName"
-		state.isBucketCreated = false
+	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
+		atomicState.bucketKey = "$newBucketKey"
+		atomicState.bucketName = "$newBucketName"
+		atomicState.isBucketCreated = false
 	}
+
+	tryCreateBucket()
 }
 
 def setAccessKey() {
 	log.trace "set access key"
 	def newAccessKey = request.JSON?.accessKey
+	def newGrokerSubdomain = request.JSON?.grokerSubdomain
 
-	if (newAccessKey && newAccessKey != state.accessKey) {
-		state.accessKey = "$newAccessKey"
-		state.isBucketCreated = false
+	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
+		atomicState.grokerSubdomain = "$newGrokerSubdomain"
+		atomicState.isBucketCreated = false
+	}
+    
+	if (newAccessKey && newAccessKey != atomicState.accessKey) {
+		atomicState.accessKey = "$newAccessKey"
+		atomicState.isBucketCreated = false
 	}
 }
 
 def installed() {
-
+	atomicState.version = "1.0.18"
 	subscribeToEvents()
 
-	state.isBucketCreated = false
+	atomicState.isBucketCreated = false
+	atomicState.grokerSubdomain = "groker"
+	atomicState.eventBuffer = []
+
+	runEvery15Minutes(flushBuffer)
+
+	log.debug "installed (version $atomicState.version)"
 }
 
 def updated() {
+	atomicState.version = "1.0.18"
 	unsubscribe()
 
-	if (state.bucketKey != null && state.accessKey != null) {
-		state.isBucketCreated = false
+	if (atomicState.bucketKey != null && atomicState.accessKey != null) {
+		atomicState.isBucketCreated = false
 	}
-	
+	if (atomicState.eventBuffer == null) {
+		atomicState.eventBuffer = []
+	}
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		atomicState.grokerSubdomain = "groker"
+	}
+
 	subscribeToEvents()
+
+	log.debug "updated (version $atomicState.version)"
 }
 
-def createBucket() {
+def uninstalled() {
+	log.debug "uninstalled (version $atomicState.version)"
+}
 
-	if (!state.bucketName) {
-    	state.bucketName = state.bucketKey
+def tryCreateBucket() {
+	
+	// can't ship events if there is no grokerSubdomain
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		log.error "streaming url is currently null"
+		return
+	}
+
+	// if the bucket has already been created, no need to continue
+	if (atomicState.isBucketCreated) {
+		return
+	}
+
+	if (!atomicState.bucketName) {
+    	atomicState.bucketName = atomicState.bucketKey
     }
-	def bucketName = "${state.bucketName}"
-	def bucketKey = "${state.bucketKey}"
-	def accessKey = "${state.accessKey}"
+    if (!atomicState.accessKey) {
+    	return
+    }
+	def bucketName = "${atomicState.bucketName}"
+	def bucketKey = "${atomicState.bucketKey}"
+	def accessKey = "${atomicState.accessKey}"
 
 	def bucketCreateBody = new JsonSlurper().parseText("{\"bucketKey\": \"$bucketKey\", \"bucketName\": \"$bucketName\"}")
 
 	def bucketCreatePost = [
-		uri: 'https://groker.initialstate.com/api/buckets',
+		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/buckets",
 		headers: [
 			"Content-Type": "application/json",
 			"X-IS-AccessKey": accessKey
@@ -258,10 +297,20 @@ def createBucket() {
 
 	log.debug bucketCreatePost
 
-	httpPostJson(bucketCreatePost) {
-		log.debug "bucket posted"
-		state.isBucketCreated = true
+	try {
+		// Create a bucket on Initial State so the data has a logical grouping
+		httpPostJson(bucketCreatePost) { resp ->
+			log.debug "bucket posted"
+			if (resp.status >= 400) {
+				log.error "bucket not created successfully"
+			} else {
+				atomicState.isBucketCreated = true
+			}
+		}
+	} catch (e) {
+		log.error "bucket creation error: $e"
 	}
+
 }
 
 def genericHandler(evt) {
@@ -273,33 +322,80 @@ def genericHandler(evt) {
 	}
 	def value = "$evt.value"
 
+	tryCreateBucket()
+
 	eventHandler(key, value)
 }
 
-def eventHandler(name, value) {
+// This is a handler function for flushing the event buffer
+// after a specified amount of time to reduce the load on ST servers
+def flushBuffer() {
+	log.trace "About to flush the buffer on schedule"
+	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
+		tryShipEvents()
+	}
+}
 
-	if (state.accessKey == null || state.bucketKey == null) {
+def eventHandler(name, value) {
+	log.debug atomicState.eventBuffer
+
+	def eventBuffer = atomicState.eventBuffer
+	def epoch = now() / 1000
+	
+	// if for some reason this code block is being run
+	// but the SmartApp wasn't propery setup during install
+	// we need to set initialize the eventBuffer.
+	if (!atomicState.eventBuffer) {
+		atomicState.eventBuffer = []
+	}
+	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
+	
+	log.debug eventBuffer
+
+	atomicState.eventBuffer = eventBuffer
+
+	if (eventBuffer.size() >= 10) {
+		tryShipEvents()
+	}
+}
+
+// a helper function for shipping the atomicState.eventBuffer to Initial State
+def tryShipEvents() {
+
+	// can't ship events if there is no grokerSubdomain
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		log.error "streaming url is currently null"
+		return
+	}
+	// can't ship if access key and bucket key are null, so finish trying
+	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
 		return
 	}
 
-	if (!state.isBucketCreated) {
-		createBucket()
-	}
-
-	def eventBody = new JsonSlurper().parseText("[{\"key\": \"$name\", \"value\": \"$value\"}]")
 	def eventPost = [
-		uri: 'https://groker.initialstate.com/api/events',
+		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${state.bucketKey}",
-			"X-IS-AccessKey": "${state.accessKey}"
+			"X-IS-BucketKey": "${atomicState.bucketKey}",
+			"X-IS-AccessKey": "${atomicState.accessKey}",
+			"Accept-Version": "0.0.2"
 		],
-		body: eventBody
+		body: atomicState.eventBuffer
 	]
 
-	log.debug eventPost
-
-	httpPostJson(eventPost) {
-		log.debug "event data posted"
+	try {
+		// post the events to initial state
+		httpPostJson(eventPost) { resp ->
+			log.debug "shipped events and got ${resp.status}"
+			if (resp.status >= 400) {
+				log.error "shipping failed... ${resp.data}"
+			} else {
+				// clear the buffer
+				atomicState.eventBuffer = []
+			}
+		}
+	} catch (e) {
+		log.error "shipping events failed: $e"
 	}
+	
 }

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -13,11 +13,11 @@ definition(
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up@2x.png",
 	oauth: true,
-    usePreferencesForAuthorization: false
+    usePreferencesForAuthorization: false,
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "serverUrl"
 }
 
 preferences {
@@ -28,16 +28,13 @@ mappings {
 	path("/receivedToken") { action: [ POST: "receivedToken", GET: "receivedToken"] }
 	path("/receiveToken") { action: [ POST: "receiveToken", GET: "receiveToken"] }
 	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
+    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}    
 	path("/oauth/callback") { action: [ GET: "callback" ] }
 }
 
-def getSmartThingsClientId() {
-   return appSettings.clientId
-}
-
-def getSmartThingsClientSecret() {
-   return appSettings.clientSecret
-}
+def getServerUrl() { return "https://graph.api.smartthings.com" }
+def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
+def buildRedirectUrl(page) { return buildActionUrl(page) }
 
 def callback() {
 	def redirectUrl = null
@@ -63,9 +60,8 @@ def callback() {
 				// SmartThings code, which we ignore, as we don't need to exchange for an access token.
 				// Instead, go initiate the Jawbone OAuth flow.
 				log.debug "Executing callback redirect to auth page"
-			    def stcid = getSmartThingsClientId()
 			    state.oauthInitState = UUID.randomUUID().toString()
-			    def oauthParams = [response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
+			    def oauthParams = [response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
 				redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
 			}
 		} else {
@@ -84,10 +80,11 @@ def authPage() {
 			createAccessToken()
 		}
         description = "Click to enter Jawbone Credentials"
-        def redirectUrl = oauthInitUrl()
-        // log.debug "RedirectURL = ${redirectUrl}"
-        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install:false) {
-               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", description:description }
+        def redirectUrl = buildRedirectUrl
+        log.debug "RedirectURL = ${redirectUrl}"
+        def donebutton= state.JawboneAccessToken != null 
+        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install: donebutton) {
+               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", state: hast ,description:description }
         }
     } else {
         description = "Jawbone Credentials Already Entered." 
@@ -99,17 +96,14 @@ def authPage() {
 
 def oauthInitUrl() {
     log.debug "oauthInitUrl"
-    def stcid = getSmartThingsClientId()
     state.oauthInitState = UUID.randomUUID().toString()
-    def oauthParams = [ response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: buildRedirectUrl("receiveToken") ]
-	return "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}"
+    def oauthParams = [ response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback" ]
+	redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
 	log.debug "receiveToken"
-    def stcid = getSmartThingsClientId()
-    def oauthClientSecret = getSmartThingsClientSecret()
-    def oauthParams = [ client_id: stcid, client_secret: oauthClientSecret, grant_type: "authorization_code", code: params.code ]
+    def oauthParams = [ client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}",
     ]
@@ -231,18 +225,10 @@ String toQueryString(Map m) {
 	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
 }
 
-def getServerUrl() { return appSettings.serverUrl ?: "https://graph.api.smartthings.com" }
-
-def buildRedirectUrl(page) {
-    // log.debug "buildRedirectUrl"
-    // /api/token/:st_token/smartapps/installations/:id/something
-    return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
-}
-
 def validateCurrentToken() {
 	log.debug "validateCurrentToken"
     def url = "https://jawbone.com/nudge/api/v.1.1/users/@me/refreshToken"
-    def requestBody = "secret=${getSmartThingsClientSecret()}"
+    def requestBody = "secret=${appSettings.clientSecret}"
 	
 	try {
 		httpPost(uri: url, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],  body: requestBody) {response ->
@@ -256,9 +242,7 @@ def validateCurrentToken() {
         if (e.statusCode == 401) { // token is expired
         	log.debug "Access token is expired"
         	if (state.refreshToken) { // if we have this we are okay
-            	def stcid = getSmartThingsClientId()
-    			def oauthClientSecret = getSmartThingsClientSecret()
-    			def oauthParams = [client_id: stcid, client_secret: oauthClientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
+    			def oauthParams = [client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
         		def tokenUrl = "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}"
         		def params = [
           			uri: tokenUrl
@@ -287,9 +271,10 @@ def validateCurrentToken() {
 }
 
 def initialize() {
-	def hookUrl = "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
-    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"
-    log.debug "Callback URL: $webhook"        
+    log.debug "Callback URL - Webhook"  
+	def localServerUrl = getApiServerUrl() 
+	def hookUrl = "${localServerUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
+    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"      
 	httpPost(uri: webhook, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ])
 }
 
@@ -327,7 +312,6 @@ def setup() {
 }
 
 def installed() {
-	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -340,7 +324,6 @@ def installed() {
 }
 
 def updated() {
-	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -499,4 +482,4 @@ def hookEventHandler() {
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
-}
+}

smartapps/macstainless/lights-on-when-door-opens-after-sundown.src/lights-on-when-door-opens-after-sundown.groovy

@@ -1,53 +0,0 @@
-/**
- *
- *  Lights On When Door Open After Sundown
- *
- *  Based on "Turn It On When It Opens" by SmartThings
- *
- *  Author: Aaron Crocco
- */
-preferences {
-	section("When the door opens..."){
-		input "contact1", "capability.contactSensor", title: "Where?"
-	}
-	section("Turn on these lights..."){
-		input "switches", "capability.switch", multiple: true
-	}
-	section("and change mode to...") {
-		input "HomeAfterDarkMode", "mode", title: "Mode?"
-	}
-}
-
-
-def installed()
-{
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def updated()
-{
-	unsubscribe()
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def contactOpenHandler(evt) {
-	log.debug "$evt.value: $evt, $settings"
-	
-	//Check current time to see if it's after sundown.
-	def s = getSunriseAndSunset(zipCode: zipCode, sunriseOffset: sunriseOffset, sunsetOffset: sunsetOffset)
-	def now = new Date()
-	def setTime = s.sunset
-	log.debug "Sunset is at $setTime. Current time is $now"
-        
-        
-    if (setTime.before(now)) {	//Executes only if it's after sundown.
-			
-		log.trace "Turning on switches: $switches"
-		switches.on()
-		log.trace "Changing house mode to $HomeAfterDarkMode"
-        setLocationMode(HomeAfterDarkMode)
-        sendPush("Welcome home! Changing mode to $HomeAfterDarkMode.")
-
-	}   
-}
-

smartapps/mager/weather-underground-pws-connect.src/weather-underground-pws-connect.groovy

@@ -26,7 +26,8 @@ definition(
     iconUrl: "http://i.imgur.com/HU0ANBp.png",
     iconX2Url: "http://i.imgur.com/HU0ANBp.png",
     iconX3Url: "http://i.imgur.com/HU0ANBp.png",
-    oauth: true)
+    oauth: true,
+    singleInstance: true)
 
 
 preferences {

smartapps/networkscanner/scanner-smartthings-apps.src/scanner-smartthings-apps.groovy

@@ -0,0 +1,69 @@
+/**
+ *  SCANNER SMARTTHINGS APPS
+ *
+ *  Copyright 2015 kathiresan
+ *
+ */
+definition(
+    name: "SCANNER SMARTTHINGS APPS",
+    namespace: "NetworkScanner",
+    author: "kathiresan",
+    description: "Network Scanner Smartthings Apps",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: true)
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+def hub = location.hubs[0]
+	initialize()
+    log.debug "id: ${hub.id}"
+    log.debug "zigbeeId: ${hub.zigbeeId}"
+    log.debug "zigbeeEui: ${hub.zigbeeEui}"
+
+    // PHYSICAL or VIRTUAL
+    log.debug "type: ${hub.type}"
+
+    log.debug "name: ${hub.name}"
+    log.debug "firmwareVersionString: ${hub.firmwareVersionString}"
+    log.debug "localIp: ${hub.localIP}"
+    log.debug "localSrvPortTCP: ${hub.localSrvPortTCP}"
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+
+mappings {
+  path("/HubInfo") {
+    action: [
+      GET: "hubInfo"
+    ]
+  }
+}
+
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def hubInfo() {
+
+    def hub = location.hubs[0]
+    return "localIp: ${hub.localIP}"
+}
+// TODO: implement event handlers

smartapps/smart-auto-lock-unlock/smart-auto-lock-unlock.src/smart-auto-lock-unlock.groovy

@@ -14,8 +14,8 @@
  *
  */
 definition(
-    name: "Smart Lock / Unlock",
-    namespace: "",
+    name: "Smart Auto Lock / Unlock",
+    namespace: "smart-auto-lock-unlock",
     author: "Arnaud",
     description: "Automatically locks door X minutes after being closed and keeps door unlocked if door is open.",
     category: "Safety & Security",

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -0,0 +1,607 @@
+/**
+ *  Bose SoundTouch (Connect)
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ definition(
+    name: "Bose SoundTouch (Connect)",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Control your Bose SoundTouch speakers",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    singleInstance: true
+)
+
+preferences {
+    page(name:"deviceDiscovery", title:"Device Setup", content:"deviceDiscovery", refreshTimeout:5)
+}
+
+/**
+ * Get the urn that we're looking for
+ *
+ * @return URN which we are looking for
+ *
+ * @todo This + getUSNQualifier should be one and should use regular expressions
+ */
+def getDeviceType() {
+    return "urn:schemas-upnp-org:device:MediaRenderer:1" // Bose
+}
+
+/**
+ * If not null, returns an additional qualifier for ssdUSN
+ * to avoid spamming the network
+ *
+ * @return Additional qualifier OR null if not needed
+ */
+def getUSNQualifier() {
+    return "uuid:BO5EBO5E-F00D-F00D-FEED-"
+}
+
+/**
+ * Get the name of the new device to instantiate in the user's smartapps
+ * This must be an app owned by the namespace (see #getNameSpace).
+ *
+ * @return name
+ */
+def getDeviceName() {
+    return "Bose SoundTouch"
+}
+
+/**
+ * Returns the namespace this app and siblings use
+ *
+ * @return namespace
+ */
+def getNameSpace() {
+    return "smartthings"
+}
+
+/**
+ * The deviceDiscovery page used by preferences. Will automatically
+ * make calls to the underlying discovery mechanisms as well as update
+ * whenever new devices are discovered AND verified.
+ *
+ * @return a dynamicPage() object
+ */
+def deviceDiscovery()
+{
+    if(canInstallLabs())
+    {
+        def refreshInterval = 3 // Number of seconds between refresh
+        int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
+        state.deviceRefreshCount = deviceRefreshCount + refreshInterval
+
+        def devices = getSelectableDevice()
+        def numFound = devices.size() ?: 0
+
+        // Make sure we get location updates (contains LAN data such as SSDP results, etc)
+        subscribeNetworkEvents()
+
+        //device discovery request every 15s
+        if((deviceRefreshCount % 15) == 0) {
+            discoverDevices()
+        }
+
+        // Verify request every 3 seconds except on discoveries
+        if(((deviceRefreshCount % 3) == 0) && ((deviceRefreshCount % 15) != 0)) {
+            verifyDevices()
+        }
+
+        log.trace "Discovered devices: ${devices}"
+
+        return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+            section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
+            }
+        }
+    }
+    else
+    {
+        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+        return dynamicPage(name:"deviceDiscovery", title:"Upgrade needed!", nextPage:"", install:true, uninstall: true) {
+            section("Upgrade") {
+                paragraph "$upgradeNeeded"
+            }
+        }
+    }
+}
+
+/**
+ * Called by SmartThings Cloud when user has selected device(s) and
+ * pressed "Install".
+ */
+def installed() {
+    log.trace "Installed with settings: ${settings}"
+    initialize()
+}
+
+/**
+ * Called by SmartThings Cloud when app has been updated
+ */
+def updated() {
+    log.trace "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+/**
+ * Called by SmartThings Cloud when user uninstalls the app
+ *
+ * We don't need to manually do anything here because any children
+ * are automatically removed upon the removal of the parent.
+ *
+ * Only time to do anything here is when you need to notify
+ * the remote end. And even then you're discouraged from removing
+ * the children manually.
+ */
+def uninstalled() {
+}
+
+/**
+ * If user has selected devices, will start monitoring devices
+ * for changes (new address, port, etc...)
+ */
+def initialize() {
+    log.trace "initialize()"
+    state.subscribe = false
+    if (selecteddevice) {
+        addDevice()
+        refreshDevices()
+        subscribeNetworkEvents(true)
+    }
+}
+
+/**
+ * Adds the child devices based on the user's selection
+ *
+ * Uses selecteddevice defined in the deviceDiscovery() page
+ */
+def addDevice(){
+    def devices = getVerifiedDevices()
+    def devlist
+    log.trace "Adding childs"
+
+    // If only one device is selected, we don't get a list (when using simulator)
+    if (!(selecteddevice instanceof List)) {
+        devlist = [selecteddevice]
+    } else {
+        devlist = selecteddevice
+    }
+
+    log.trace "These are being installed: ${devlist}"
+
+    devlist.each { dni ->
+        def d = getChildDevice(dni)
+        if(!d) {
+            def newDevice = devices.find { (it.value.mac) == dni }
+            def deviceName = newDevice?.value.name
+            if (!deviceName)
+                deviceName = getDeviceName() + "[${newDevice?.value.name}]"
+            d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
+            d.boseSetDeviceID(newDevice.value.deviceID)
+            log.trace "Created ${d.displayName} with id $dni"
+        } else {
+            log.trace "${d.displayName} with id $dni already exists"
+        }
+    }
+}
+
+/**
+ * Resolves a DeviceNetworkId to an address. Primarily used by children
+ *
+ * @param dni Device Network id
+ * @return address or null
+ */
+def resolveDNI2Address(dni) {
+    def device = getVerifiedDevices().find { (it.value.mac) == dni }
+    if (device) {
+        return convertHexToIP(device.value.networkAddress)
+    }
+    return null
+}
+
+/**
+ * Joins a child to the "Play Everywhere" zone
+ *
+ * @param child The speaker joining the zone
+ * @return A list of maps with POST data
+ */
+def boseZoneJoin(child) {
+    log = child.log // So we can debug this function
+
+    def results = []
+    def result = [:]
+
+    // Find the master (if any)
+    def server = getChildDevices().find{ it.boseGetZone() == "server" }
+
+    if (server) {
+        log.debug "boseJoinZone() We have a server already, so lets add the new speaker"
+        child.boseSetZone("client")
+
+        result['endpoint'] = "/setZone"
+        result['host'] = server.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${server.boseGetDeviceID()}\" senderIPAddress=\"${server.getDeviceIP()}\">"
+        getChildDevices().each{ it ->
+            log.trace "child: " + child
+            log.trace "zone : " + it.boseGetZone()
+            if (it.boseGetZone() || it.boseGetDeviceID() == child.boseGetDeviceID())
+                result['body'] = result['body'] + "<member ipaddress=\"${it.getDeviceIP()}\">${it.boseGetDeviceID()}</member>"
+        }
+        result['body'] = result['body'] + '</zone>'
+    } else {
+        log.debug "boseJoinZone() No server, add it!"
+        result['endpoint'] = "/setZone"
+        result['host'] = child.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${child.boseGetDeviceID()}\" senderIPAddress=\"${child.getDeviceIP()}\">"
+        result['body'] = result['body'] + "<member ipaddress=\"${child.getDeviceIP()}\">${child.boseGetDeviceID()}</member>"
+        result['body'] = result['body'] + '</zone>'
+        child.boseSetZone("server")
+    }
+    results << result
+    return results
+}
+
+def boseZoneReset() {
+    getChildDevices().each{ it.boseSetZone(null) }
+}
+
+def boseZoneHasMaster() {
+    return getChildDevices().find{ it.boseGetZone() == "server" } != null
+}
+
+/**
+ * Removes a speaker from the play everywhere zone.
+ *
+ * @param child Which speaker is leaving
+ * @return a list of maps with POST data
+ */
+def boseZoneLeave(child) {
+    log = child.log // So we can debug this function
+
+    def results = []
+    def result = [:]
+
+    // First, tag us as a non-member
+    child.boseSetZone(null)
+
+    // Find the master (if any)
+    def server = getChildDevices().find{ it.boseGetZone() == "server" }
+
+    if (server && server.boseGetDeviceID() != child.boseGetDeviceID()) {
+        log.debug "boseLeaveZone() We have a server, so tell him we're leaving"
+        result['endpoint'] = "/removeZoneSlave"
+        result['host'] = server.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${server.boseGetDeviceID()}\" senderIPAddress=\"${server.getDeviceIP()}\">"
+        result['body'] = result['body'] + "<member ipaddress=\"${child.getDeviceIP()}\">${child.boseGetDeviceID()}</member>"
+        result['body'] = result['body'] + '</zone>'
+        results << result
+    } else {
+        log.debug "boseLeaveZone() No server, then...uhm, we probably were it!"
+        // Dismantle the entire thing, first send this to master
+        result['endpoint'] = "/removeZoneSlave"
+        result['host'] = child.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${child.boseGetDeviceID()}\" senderIPAddress=\"${child.getDeviceIP()}\">"
+        getChildDevices().each{ dev ->
+            if (dev.boseGetZone() || dev.boseGetDeviceID() == child.boseGetDeviceID())
+                result['body'] = result['body'] + "<member ipaddress=\"${dev.getDeviceIP()}\">${dev.boseGetDeviceID()}</member>"
+        }
+        result['body'] = result['body'] + '</zone>'
+        results << result
+
+        // Also issue this to each individual client
+        getChildDevices().each{ dev ->
+            if (dev.boseGetZone() && dev.boseGetDeviceID() != child.boseGetDeviceID()) {
+                log.trace "Additional device: " + dev
+                result['host'] = dev.getDeviceIP() + ":8090"
+                results << result
+            }
+        }
+    }
+
+    return results
+}
+
+/**
+ * Define our XML parsers
+ *
+ * @return mapping of root-node <-> parser function
+ */
+def getParsers() {
+    [
+        "root" : "parseDESC",
+        "info" : "parseINFO"
+    ]
+}
+
+/**
+ * Called when location has changed, contains information from
+ * network transactions. See deviceDiscovery() for where it is
+ * registered.
+ *
+ * @param evt Holds event information
+ */
+def onLocation(evt) {
+    // Convert the event into something we can use
+    def lanEvent = parseLanMessage(evt.description, true)
+    lanEvent << ["hub":evt?.hubId]
+
+    // Determine what we need to do...
+    if (lanEvent?.ssdpTerm?.contains(getDeviceType()) &&
+        (getUSNQualifier() == null ||
+         lanEvent?.ssdpUSN?.contains(getUSNQualifier())
+        )
+       )
+    {
+        parseSSDP(lanEvent)
+    }
+    else if (
+        lanEvent.headers && lanEvent.body &&
+        lanEvent.headers."content-type".contains("xml")
+        )
+    {
+        def parsers = getParsers()
+        def xmlData = new XmlSlurper().parseText(lanEvent.body)
+
+        // Let each parser take a stab at it
+        parsers.each { node,func ->
+            if (xmlData.name() == node)
+                "$func"(xmlData)
+        }
+    }
+}
+
+/**
+ * Handles SSDP description file.
+ *
+ * @param xmlData
+ */
+private def parseDESC(xmlData) {
+    log.info "parseDESC()"
+
+    def devicetype = getDeviceType().toLowerCase()
+    def devicetxml = body.device.deviceType.text().toLowerCase()
+
+    // Make sure it's the type we want
+    if (devicetxml == devicetype) {
+        def devices = getDevices()
+        def device = devices.find {it?.key?.contains(xmlData?.device?.UDN?.text())}
+        if (device && !device.value?.verified) {
+            // Unlike regular DESC, we cannot trust this just yet, parseINFO() decides all
+            device.value << [name:xmlData?.device?.friendlyName?.text(),model:xmlData?.device?.modelName?.text(), serialNumber:xmlData?.device?.serialNum?.text()]
+        } else {
+            log.error "parseDESC(): The xml file returned a device that didn't exist"
+        }
+    }
+}
+
+/**
+ * Handle BOSE <info></info> result. This is an alternative to
+ * using the SSDP description standard. Some of the speakers do
+ * not support SSDP description, so we need this as well.
+ *
+ * @param xmlData
+ */
+private def parseINFO(xmlData) {
+    log.info "parseINFO()"
+    def devicetype = getDeviceType().toLowerCase()
+
+    def deviceID = xmlData.attributes()['deviceID']
+    def device = getDevices().find {it?.key?.contains(deviceID)}
+    if (device && !device.value?.verified) {
+        device.value << [name:xmlData?.name?.text(),model:xmlData?.type?.text(), serialNumber:xmlData?.serialNumber?.text(), "deviceID":deviceID, verified: true]
+    }
+}
+
+/**
+ * Handles SSDP discovery messages and adds them to the list
+ * of discovered devices. If it already exists, it will update
+ * the port and location (in case it was moved).
+ *
+ * @param lanEvent
+ */
+def parseSSDP(lanEvent) {
+    //SSDP DISCOVERY EVENTS
+    def USN = lanEvent.ssdpUSN.toString()
+    def devices = getDevices()
+
+    if (!(devices."${USN}")) {
+        //device does not exist
+        log.trace "parseSDDP() Adding Device \"${USN}\" to known list"
+        devices << ["${USN}":lanEvent]
+    } else {
+        // update the values
+        def d = devices."${USN}"
+        if (d.networkAddress != lanEvent.networkAddress || d.deviceAddress != lanEvent.deviceAddress) {
+            log.trace "parseSSDP() Updating device location (ip & port)"
+            d.networkAddress = lanEvent.networkAddress
+            d.deviceAddress = lanEvent.deviceAddress
+        }
+    }
+}
+
+/**
+ * Generates a Map object which can be used with a preference page
+ * to represent a list of devices detected and verified.
+ *
+ * @return Map with zero or more devices
+ */
+Map getSelectableDevice() {
+    def devices = getVerifiedDevices()
+    def map = [:]
+    devices.each {
+        def value = "${it.value.name}"
+        def key = it.value.mac
+        map["${key}"] = value
+    }
+    map
+}
+
+/**
+ * Starts the refresh loop, making sure to keep us up-to-date with changes
+ *
+ */
+private refreshDevices() {
+    discoverDevices()
+    verifyDevices()
+    runIn(300, "refreshDevices")
+}
+
+/**
+ * Starts a subscription for network events
+ *
+ * @param force If true, will unsubscribe and subscribe if necessary (Optional, default false)
+ */
+private subscribeNetworkEvents(force=false) {
+    if (force) {
+        unsubscribe()
+        state.subscribe = false
+    }
+
+    if(!state.subscribe) {
+        subscribe(location, null, onLocation, [filterEvents:false])
+        state.subscribe = true
+    }
+}
+
+/**
+ * Issues a SSDP M-SEARCH over the LAN for a specific type (see getDeviceType())
+ */
+private discoverDevices() {
+    log.trace "discoverDevice() Issuing SSDP request"
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery ${getDeviceType()}", physicalgraph.device.Protocol.LAN))
+}
+
+/**
+ * Walks through the list of unverified devices and issues a verification
+ * request for each of them (basically calling verifyDevice() per unverified)
+ */
+private verifyDevices() {
+    def devices = getDevices().findAll { it?.value?.verified != true }
+
+    devices.each {
+        verifyDevice(
+            it?.value?.mac,
+            convertHexToIP(it?.value?.networkAddress),
+            convertHexToInt(it?.value?.deviceAddress),
+            it?.value?.ssdpPath
+        )
+    }
+}
+
+/**
+ * Verify the device, in this case, we need to obtain the info block which
+ * holds information such as the actual mac to use in certain scenarios.
+ *
+ * Without this mac (henceforth referred to as deviceID), we can't do multi-speaker
+ * functions.
+ *
+ * @param deviceNetworkId The DNI of the device
+ * @param ip The address of the device on the network (not the same as DNI)
+ * @param port The port to use (0 will be treated as invalid and will use 80)
+ * @param devicessdpPath The URL path (for example, /desc)
+ *
+ * @note Result is captured in locationHandler()
+ */
+private verifyDevice(String deviceNetworkId, String ip, int port, String devicessdpPath) {
+    if(ip) {
+        def address = ip + ":8090"
+        sendHubCommand(new physicalgraph.device.HubAction([
+            method: "GET",
+            path: "/info",
+            headers: [
+                HOST: address,
+            ]]))
+    } else {
+        log.warn("verifyDevice() IP address was empty")
+    }
+}
+
+/**
+ * Returns an array of devices which have been verified
+ *
+ * @return array of verified devices
+ */
+def getVerifiedDevices() {
+    getDevices().findAll{ it?.value?.verified == true }
+}
+
+/**
+ * Returns all discovered devices or an empty array if none
+ *
+ * @return array of devices
+ */
+def getDevices() {
+    state.devices = state.devices ?: [:]
+}
+
+/**
+ * Converts a hexadecimal string to an integer
+ *
+ * @param hex The string with a hexadecimal value
+ * @return An integer
+ */
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+/**
+ * Converts an IP address represented as 0xAABBCCDD to AAA.BBB.CCC.DDD
+ *
+ * @param hex Address represented in hex
+ * @return String containing normal IPv4 dot notation
+ */
+private String convertHexToIP(hex) {
+    if (hex)
+        [convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+    else
+        hex
+}
+
+/**
+ * Tests if this setup can support SmarthThing Labs items
+ *
+ * @return true if it supports it.
+ */
+private Boolean canInstallLabs()
+{
+    return hasAllHubsOver("000.011.00603")
+}
+
+/**
+ * Tests if the firmwares on all hubs owned by user match or exceed the
+ * provided version number.
+ *
+ * @param desiredFirmware The version that must match or exceed
+ * @return true if hub has same or newer
+ */
+private Boolean hasAllHubsOver(String desiredFirmware)
+{
+    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
+}
+
+/**
+ * Creates a list of firmware version for every hub the user has
+ *
+ * @return List of firmwares
+ */
+private List getRealHubFirmwareVersions()
+{
+    return location.hubs*.firmwareVersionString.findAll { it }
+}

smartapps/smartthings/carpool-notifier.src/carpool-notifier.groovy

@@ -30,7 +30,7 @@ definition(
     name: "Carpool Notifier",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "This SmartApp is designed to send notifications to your carpooling buddies when you arrive to pick them up. What separates this SmartApp from other notification SmartApps is that it will only send a notification if your carpool buddy is not with you. If the person you are picking up is present, and has been for 5 minutes or more, they will get a notification when you become present.",
+    description: "Send notifications to your carpooling buddies when you arrive to pick them up. If the person you are picking up is home, and has been for 5 minutes or more, they will get a notification when you arrive.",
     category: "Green Living",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Family/App-IMadeIt.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Family/App-IMadeIt@2x.png"

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -26,7 +26,8 @@ definition(
     description: "Connect your Ecobee thermostat to SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/ecobee.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/ecobee@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/ecobee@2x.png",
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "serverUrl"

smartapps/smartthings/foscam-connect.src/foscam-connect.groovy

@@ -23,7 +23,8 @@ definition(
     description: "Connect and take pictures using your Foscam camera from inside the Smartthings app.",
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -27,7 +27,7 @@ definition(
 	name: "Gentle Wake Up",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Gentle Wake Up dims your lights slowly, allowing you to wake up more naturally. Once your lights have finished dimming, optionally turn on more things or send yourself a text for a more gentle nudge into the waking world (you may want to set your normal alarm as a backup plan).",
+	description: "Dim your lights up slowly, allowing you to wake up more naturally.",
 	category: "Health & Wellness",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/HealthAndWellness/App-SleepyTime.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/HealthAndWellness/App-SleepyTime@2x.png"

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -23,7 +23,8 @@ definition(
 	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png"
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
+    singleInstance: true
 )
 
 preferences {
@@ -64,10 +65,14 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }    
+
+	subscribe(location, null, locationHandler, [filterEvents:false])
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -94,11 +99,20 @@ def bridgeLinking()
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-	def paragraphText = "Press the button on your Hue Bridge to setup a link."
+    def paragraphText
+    def hueimage = null
+	if (selectedHue) {
+		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
+    } else {
+    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
+    }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
-		title = "Success! - click 'Next'"
+		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -106,30 +120,39 @@ def bridgeLinking()
 	}
 
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
-		section("Button Press") {
+		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
 
-def bulbDiscovery()
-{
+def bulbDiscovery() {
 	int bulbRefreshCount = !state.bulbRefreshCount ? 0 : state.bulbRefreshCount as int
 	state.bulbRefreshCount = bulbRefreshCount + 1
 	def refreshInterval = 3
-
-	def options = bulbsDiscovered() ?: []
-	def numFound = options.size() ?: 0
-
-	if((bulbRefreshCount % 3) == 0) {
+	state.inBulbDiscovery = true
+	def bridge = null
+	if (selectedHue) {
+        bridge = getChildDevice(selectedHue)
+        subscribe(bridge, "bulbList", bulbListData)
+	}
+    state.bridgeRefreshCount = 0
+	def bulboptions = bulbsDiscovered() ?: [:]
+	def numFound = bulboptions.size() ?: 0
+    if (numFound == 0)
+    	app.updateSetting("selectedBulbs", "") 
+        
+	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:options
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {
+		section {				
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -194,24 +217,29 @@ Map bridgesDiscovered() {
 
 Map bulbsDiscovered() {
 	def bulbs =  getHueBulbs()
-	def map = [:]
+	def bulbmap = [:]
 	if (bulbs instanceof java.util.Map) {
 		bulbs.each {
-			def value = "${it?.value?.name}"
-			def key = app.id +"/"+ it?.value?.id
-			map["${key}"] = value
+			def value = "${it.value.name}"
+			def key = app.id +"/"+ it.value.id
+			bulbmap["${key}"] = value
 		}
 	} else { //backwards compatable
 		bulbs.each {
-			def value = "${it?.name}"
-			def key = app.id +"/"+ it?.id
-			map["${key}"] = value
+			def value = "${it.name}"
+			def key = app.id +"/"+ it.id
+            logg += "$value - $key, "
+			bulbmap["${key}"] = value
 		}
 	}
-	map
+	return bulbmap
 }
 
-def getHueBulbs() {
+def bulbListData(evt) {
+	state.bulbs = evt.jsonData
+}
+
+Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
 
@@ -231,24 +259,19 @@ def installed() {
 def updated() {
 	log.trace "Updated with settings: ${settings}"
     unschedule()
-	unsubscribe()
+	unsubscribe() 
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"
-	state.subscribe = false
-	state.bridgeSelectedOverride = false
-	def bridge = null
-
+	log.debug "Initializing"  
+    unsubscribe(bridge)
+    state.inBulbDiscovery = false
+    state.bridgeRefreshCount = 0
+    state.bulbRefreshCount = 0
 	if (selectedHue) {
-		addBridge()
-        bridge = getChildDevice(selectedHue)
-        subscribe(bridge, "bulbList", bulbListHandler)
-	}
-
-	if (selectedBulbs) {
-		addBulbs()
+   		addBridge()
+        addBulbs()
         doDeviceSync()
         runEvery5Minutes("doDeviceSync")
 	}
@@ -263,38 +286,49 @@ def manualRefresh() {
 
 def uninstalled(){
 	state.bridges = [:]
-    state.subscribe = false
+    state.username = null
 }
 
 // Handles events to add new bulbs
-def bulbListHandler(evt) {
-	def bulbs = [:]
-	log.trace "Adding bulbs to state..."
-	state.bridgeProcessedLightList = true
-	evt.jsonData.each { k,v ->
-		log.trace "$k: $v"
-		if (v instanceof Map) {
-			bulbs[k] = [id: k, name: v.name, type: v.type, hub:evt.value]
-		}
-	}
-	state.bulbs = bulbs
-	log.info "${bulbs.size()} bulbs found"
+def bulbListHandler(hub, data = "") {
+	def msg = "Bulbs list not processed. Only while in settings menu."
+    def bulbs = [:]
+	if (state.inBulbDiscovery) {       
+        def logg = ""
+        log.trace "Adding bulbs to state..."
+        state.bridgeProcessedLightList = true
+        def object = new groovy.json.JsonSlurper().parseText(data)   
+        object.each { k,v ->
+            if (v instanceof Map) 
+                bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
+        }
+    }  
+    def bridge = null
+	if (selectedHue) 
+        bridge = getChildDevice(selectedHue)
+    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+    msg = "${bulbs.size()} bulbs found. ${bulbs}"
+	return msg
 }
 
 def addBulbs() {
 	def bulbs = getHueBulbs()
-	selectedBulbs.each { dni ->
+	selectedBulbs?.each { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-				if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light")) {
-					d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-				} else {
-					d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-				}
-			} else {
+                if (newHueBulb != null) {
+                    if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") ) {
+                        d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    } else {
+                        d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    }
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
+			} else { 
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -322,7 +356,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true
+            def newbridge = true 
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -332,22 +366,27 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false
+                        newbridge = false 
                     }
-                }
-            }
+                }    
+            }  
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
  				if (vbridge.value.ip && vbridge.value.port) {
-                	if (vbridge.value.ip.contains("."))
+                	if (vbridge.value.ip.contains(".")) {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
-                    else
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-				} else
+                        childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
+                    } else {
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                        childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
+                    }    
+				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
+                    childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
+                }    
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -355,7 +394,6 @@ def addBridge() {
 	}
 }
 
-
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -397,8 +435,11 @@ def locationHandler(evt) {
                         }
                     }
                 }
-            } else {
-            	networkAddress = d.latestState('networkAddress').stringValue
+			} else {
+            	if (d.getDeviceDataByName("networkAddress"))
+                	networkAddress = d.getDeviceDataByName("networkAddress")
+            	else
+                	networkAddress = d.latestState('networkAddress').stringValue
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -406,7 +447,8 @@ def locationHandler(evt) {
                     dstate.port = port
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
-            	}
+                    d.updateDataValue("networkAddress", host)
+            	} 
             }
 		}
 	}
@@ -454,17 +496,13 @@ def locationHandler(evt) {
 
 def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
-
-	//shrink the large bulb lists
 	convertBulbListToMap()
-
 	poll()
-
-	if(!state.subscribe) {
+    try {
 		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
-
+    } catch (all) {
+    	log.trace "Subscription already exist"
+ 	}
 	discoverBridges()
 }
 
@@ -473,44 +511,49 @@ def doDeviceSync(){
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description)
+	def parsedEvent = parseLanMessage(description) 
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
-		if (headerString?.contains("json")) {
-            def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
-            if (body instanceof java.util.HashMap)
-            { //poll response
+        def bodyString = parsedEvent.body.toString()
+		if (headerString?.contains("json")) { 
+        	def body
+        	try {
+            	body = new groovy.json.JsonSlurper().parseText(bodyString)
+            } catch (all) {
+            	log.warn "Parsing Body failed - trying again..."
+                poll()
+            }
+            if (body instanceof java.util.HashMap) { 
+            	//poll response
                 def bulbs = getChildDevices()
-                //for each bulb
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
                     if (d) {
                         if (bulb.value.state?.reachable) {
-                                sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
-                                sendEvent(d.deviceNetworkId, [name: "level", value: Math.round(bulb.value.state.bri * 100 / 255)])
-                                if (bulb.value.state.sat) {
-                                    def hue = Math.min(Math.round(bulb.value.state.hue * 100 / 65535), 65535) as int
-                                    def sat = Math.round(bulb.value.state.sat * 100 / 255) as int
-                                    def hex = colorUtil.hslToHex(hue, sat)
-                                    sendEvent(d.deviceNetworkId, [name: "color", value: hex])
-                                    sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                    sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
-                                }
-                            } else {
-                                sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                                sendEvent(d.deviceNetworkId, [name: "level", value: 100])
-                                if (bulb.value.state.sat) {
-                                    def hue = 23
-                                    def sat = 56
-                                    def hex = colorUtil.hslToHex(23, 56)
-                                    sendEvent(d.deviceNetworkId, [name: "color", value: hex])
-                                    sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                    sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
-                                }
-                         }
+                            sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
+                            sendEvent(d.deviceNetworkId, [name: "level", value: Math.round(bulb.value.state.bri * 100 / 255)])
+                            if (bulb.value.state.sat) {
+                                def hue = Math.min(Math.round(bulb.value.state.hue * 100 / 65535), 65535) as int
+                                def sat = Math.round(bulb.value.state.sat * 100 / 255) as int
+                                def hex = colorUtil.hslToHex(hue, sat)
+                                sendEvent(d.deviceNetworkId, [name: "color", value: hex])
+                                sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
+                        } else {
+                            sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            if (bulb.value.state.sat) {
+                                def hue = 23
+                                def sat = 56
+                                def hex = colorUtil.hslToHex(23, 56)
+                                sendEvent(d.deviceNetworkId, [name: "color", value: hex])
+                                sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
+                            }    
+                        }
                     }
-
-                }
+                }     
             }
             else
             { //put response
@@ -559,30 +602,29 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}
+    	}        
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
 	}
 }
 
-def on(childDevice, transition = 4) {
+def on(childDevice) {
 	log.debug "Executing 'on'"
-	// Assume bulb is off if no current state is found for level to avoid bulbs getting stuck in off after initial discovery
-    def percent = childDevice.device?.currentValue("level") as Integer ?: 0
-	def level = Math.min(Math.round(percent * 255 / 100), 255)
-	put("lights/${getId(childDevice)}/state", [bri: level, on: true, transitiontime: transition])
-    return "level: $percent"
+	put("lights/${getId(childDevice)}/state", [on: true])
+    return "Bulb is On"
 }
 
-def off(childDevice, transition = 4) {
+def off(childDevice) {
 	log.debug "Executing 'off'"
-	put("lights/${getId(childDevice)}/state", [on: false, transitiontime: transition])
+	put("lights/${getId(childDevice)}/state", [on: false])
+    return "Bulb is Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-	def level = Math.min(Math.round(percent * 255 / 100), 255)
+    def level 
+    if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
 
@@ -598,19 +640,21 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColor(childDevice, color, alert = "none", transition = 4) {
-	log.debug "Executing 'setColor($color)'"
-	def hue = Math.min(Math.round(color.hue * 65535 / 100), 65535)
-	def sat = Math.min(Math.round(color.saturation * 255 / 100), 255)
+def setColor(childDevice, huesettings) {
+	log.debug "Executing 'setColor($huesettings)'"
+	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
+    def alert = huesettings.alert ? huesettings.alert : "none"
+    def transition = huesettings.transition ? huesettings.transition : 4
 
 	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
-	if (color.level != null) {
-		value.bri = Math.min(Math.round(color.level * 255 / 100), 255)
+	if (huesettings.level != null) {
+        if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
 		value.on = value.bri > 0
 	}
 
-	if (color.switch) {
-		value.on = color.switch == "on"
+	if (huesettings.switch) {
+		value.on = huesettings.switch == "on"
 	}
 
 	log.debug "sending command $value"
@@ -640,15 +684,19 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-	log.debug "GET: $host$uri"
-	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+    try {
+		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
+	} catch (all) {
+        log.warn "Parsing Body failed - trying again..."
+        doDeviceSync()
+    }
 }
 
 private put(path, body) {
-	def host = getBridgeIP()
+	def host = getBridgeIP()	
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -668,12 +716,19 @@ ${bodyJSON}
 private getBridgeIP() {
 	def host = null
 	if (selectedHue) {
-        def d = getChildDevice(dni)
-    	if (d)
-        	host = d.latestState('networkAddress').stringValue
+        def d = getChildDevice(selectedHue)
+    	if (d) {
+        	if (d.getDeviceDataByName("networkAddress"))
+            	host =  d.getDeviceDataByName("networkAddress")
+            else
+        		host = d.latestState('networkAddress').stringValue
+        }    
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
+            if (!bridge) { 
+            	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
+            }
             if (bridge?.ip && bridge?.port) {
             	if (bridge?.ip.contains("."))
             		host = "${bridge?.ip}:${bridge?.port}"
@@ -681,9 +736,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }
+        }    
         log.trace "Bridge: $selectedHue - Host: $host"
-    }
+    }    
     return host
 }
 

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -98,6 +98,15 @@ def installed() {
 }
 
 def updated() {
+	def currentDeviceIds = settings.collect { k, devices -> devices }.flatten().collect { it.id }.unique()
+	def subscriptionDevicesToRemove = app.subscriptions*.device.findAll { device ->
+		!currentDeviceIds.contains(device.id)
+	}
+	subscriptionDevicesToRemove.each { device ->
+		log.debug "Removing $device.displayName subscription"
+		state.remove(device.id)
+		unsubscribe(device)
+	}
 	log.debug settings
 }
 

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -22,7 +22,8 @@ definition(
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/life360.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/life360@2x.png",
-    oauth: [displayName: "Life360", displayLink: "Life360"]
+    oauth: [displayName: "Life360", displayLink: "Life360"],
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
@@ -591,7 +592,7 @@ def updated() {
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device
-       		def childDevice = addChildDevice("smartthings", "life360-user", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
+       		def childDevice = addChildDevice("smartthings", "Life360 User", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
             // childDevice.setMemberId(member.id)
         
         	if (childDevice)

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -0,0 +1,404 @@
+/**
+ *  LIFX
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+definition(
+		name: "LIFX (Connect)",
+		namespace: "smartthings",
+		author: "LIFX",
+		description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+		category: "Convenience",
+		iconUrl: "https://cloud.lifx.com/images/lifx.png",
+		iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+		iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+		oauth: true,
+		singleInstance: true) {
+	appSetting "clientId"
+	appSetting "clientSecret"
+}
+
+
+preferences {
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: true)
+}
+
+mappings {
+	path("/receivedToken") { action: [ POST: "oauthReceivedToken", GET: "oauthReceivedToken"] }
+	path("/receiveToken") { action: [ POST: "oauthReceiveToken", GET: "oauthReceiveToken"] }
+	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
+	path("/oauth/callback") { action: [ GET: "oauthCallback" ] }
+	path("/oauth/initialize") { action: [ GET: "oauthInit"] }
+	path("/test") { action: [ GET: "oauthSuccess" ] }
+}
+
+def getServerUrl()               { return "https://graph.api.smartthings.com" }
+def getCallbackUrl()             { return "https://graph.api.smartthings.com/oauth/callback"}
+def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
+def getSecretKey()               { return appSettings.secretKey }
+def getClientId()                { return appSettings.clientId }
+
+def authPage() {
+	log.debug "authPage test1"
+	if (!state.lifxAccessToken) {
+		log.debug "no LIFX access token"
+		// This is the SmartThings access token
+		if (!state.accessToken) {
+			log.debug "no access token, create access token"
+			state.accessToken = createAccessToken() // predefined method
+		}
+		def description = "Tap to enter LIFX credentials"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
+//        def redirectUrl = "${apiServerUrl}"
+        log.debug "app id: ${app.id}"
+		log.debug "redirect url: ${redirectUrl}"
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
+			section {
+				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
+			}
+		}
+	} else {
+		log.debug "have LIFX access token"
+
+		def options = locationOptions() ?: []
+		def count = options.size()
+
+		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
+			section("Select your location") {
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options, submitOnChange: true
+			}
+		}
+	}
+}
+
+// OAuth
+
+def oauthInit() {
+	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote_control:all", response_type: "code" ]
+	log.info("Redirecting user to OAuth setup")
+	redirect(location: "https://cloud.lifx.com/oauth/authorize?${toQueryString(oauthParams)}")
+}
+
+def oauthCallback() {
+	def redirectUrl = null
+	if (params.authQueryString) {
+		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
+	} else {
+		log.warn "No authQueryString"
+	}
+
+	if (state.lifxAccessToken) {
+		log.debug "Access token already exists"
+		success()
+	} else {
+		def code = params.code
+		if (code) {
+			if (code.size() > 6) {
+				// LIFX code
+				log.debug "Exchanging code for access token"
+				oauthReceiveToken(redirectUrl)
+			} else {
+				// Initiate the LIFX OAuth flow.
+				oauthInit()
+			}
+		} else {
+			log.debug "This code should be unreachable"
+			success()
+		}
+	}
+}
+
+def oauthReceiveToken(redirectUrl = null) {
+	// Not sure what redirectUrl is for
+	log.debug "receiveToken - params: ${params}"
+	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
+	def params = [
+			uri: "https://cloud.lifx.com/oauth/token",
+			body: oauthParams,
+			headers: [
+					"User-Agent": "SmartThings Integration"
+			]
+	]
+	httpPost(params) { response ->
+		state.lifxAccessToken = response.data.access_token
+	}
+
+	if (state.lifxAccessToken) {
+		oauthSuccess()
+	} else {
+		oauthFailure()
+	}
+}
+
+def oauthSuccess() {
+	def message = """
+		<p>Your LIFX Account is now connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
+	oauthConnectionStatus(message)
+}
+
+def oauthFailure() {
+	def message = """
+		<p>The connection could not be established!</p>
+		<p>Click 'Done' to return to the menu.</p>
+	"""
+	oauthConnectionStatus(message)
+}
+
+def oauthReceivedToken() {
+	def message = """
+		<p>Your LIFX Account is already connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
+	oauthConnectionStatus(message)
+}
+
+def oauthConnectionStatus(message, redirectUrl = null) {
+	def redirectHtml = ""
+	if (redirectUrl) {
+		redirectHtml = """
+			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+		"""
+	}
+
+	def html = """
+		<!DOCTYPE html>
+		<html>
+		<head>
+		<meta name="viewport" content="width=device-width">
+		<title>SmartThings Connection</title>
+		<style type="text/css">
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				width: 280;
+				padding: 20px;
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+			}
+			img:nth-child(2) {
+				margin: 0 15px;
+			}
+			p {
+				font-size: 1.2em;
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				padding: 0 20px;
+				margin-bottom: 0;
+			}
+			span {
+				font-family: 'Swiss 721 W01 Light';
+			}
+		</style>
+		${redirectHtml}
+		</head>
+		<body>
+			<div class="container">
+				<img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+				<p>
+					${message}
+				</p>
+			</div>
+		</body>
+		</html>
+	"""
+	render contentType: 'text/html', data: html
+}
+
+String toQueryString(Map m) {
+	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}
+
+// App lifecycle hooks
+
+def installed() {
+	if (!state.accessToken) {
+		createAccessToken()
+	} else {
+		initialize()
+	}
+	// Check for new devices and remove old ones every 3 hours
+	runEvery3Hours('updateDevices')
+}
+
+// called after settings are changed
+def updated() {
+	if (!state.accessToken) {
+		createAccessToken()
+	} else {
+		initialize()
+	}
+}
+
+def uninstalled() {
+	log.info("Uninstalling, removing child devices...")
+	unschedule('updateDevices')
+	removeChildDevices(getChildDevices())
+}
+
+private removeChildDevices(devices) {
+	devices.each {
+		deleteChildDevice(it.deviceNetworkId) // 'it' is default
+	}
+}
+
+// called after Done is hit after selecting a Location
+def initialize() {
+	log.debug "initialize"
+	updateDevices()
+}
+
+// Misc
+
+Map apiRequestHeaders() {
+	return ["Authorization": "Bearer ${state.lifxAccessToken}",
+			"Accept": "application/json",
+			"Content-Type": "application/json",
+			"User-Agent": "SmartThings Integration"
+	]
+}
+
+// Requests
+
+def logResponse(response) {
+	log.info("Status: ${response.status}")
+	log.info("Body: ${response.data}")
+}
+
+// API Requests
+// logObject is because log doesn't work if this method is being called from a Device
+def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
+	try {
+		return c()
+	} catch (groovyx.net.http.HttpResponseException e) {
+		options.logObject.error("got error: ${e}, body: ${e.getResponse().getData()}")
+		if (e.statusCode == 401) { // token is expired
+			state.remove("lifxAccessToken")
+			options.logObject.warn "Access token is not valid"
+		}
+		return options.errorReturn
+	} catch (java.net.SocketTimeoutException e) {
+		options.logObject.warn "Connection timed out, not much we can do here"
+		return options.errorReturn
+	}
+}
+
+def apiGET(path) {
+	try {
+		httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
+	}
+}
+
+def apiPUT(path, body = [:]) {
+	try {
+		log.debug("Beginning API PUT: ${path}, ${body}")
+		httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
+	}}
+
+def devicesList(selector = '') {
+	logErrors([]) {
+		def resp = apiGET("/lights/${selector}")
+		if (resp.status == 200) {
+			return resp.data
+		} else {
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
+			return []
+		}
+	}
+}
+
+Map locationOptions() {
+	def options = [:]
+	def devices = devicesList()
+	devices.each { device ->
+		options[device.location.id] = device.location.name
+	}
+	log.debug("Locations: ${options}")
+	return options
+}
+
+def devicesInLocation() {
+	return devicesList("location_id:${settings.selectedLocationId}")
+}
+
+// ensures the devices list is up to date
+def updateDevices() {
+	if (!state.devices) {
+		state.devices = [:]
+	}
+	def devices = devicesInLocation()
+	def selectors = []
+
+	log.debug("All selectors: ${selectors}")
+
+	devices.each { device ->
+		def childDevice = getChildDevice(device.id)
+		selectors.add("${device.id}")
+		if (!childDevice) {
+			log.info("Adding device ${device.id}: ${device.product}")
+			def data = [
+					label: device.label,
+					level: Math.round((device.brightness ?: 1) * 100),
+					switch: device.connected ? device.power : "unreachable",
+					colorTemperature: device.color.kelvin
+			]
+			if (device.product.capabilities.has_color) {
+				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
+				data["hue"] = device.color.hue / 3.6
+				data["saturation"] = device.color.saturation * 100
+				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
+			} else {
+				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
+			}
+		}
+	}
+	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
+		log.info("Deleting ${it.deviceNetworkId}")
+		deleteChildDevice(it.deviceNetworkId)
+	}
+	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
+}
+
+def refreshDevices() {
+	log.info("Refreshing all devices...")
+	getChildDevices().each { device ->
+		device.refresh()
+	}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,20 +34,20 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
- 
+
 definition(
     name: "Logitech Harmony (Connect)",
     namespace: "smartthings",
-    author: "Juan Pablo Risso",
+    author: "SmartThings",
     description: "Allows you to integrate your Logitech Harmony account with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony%402x.png",
-    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"]    
+    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"],
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "callbackUrl"
 }
 
 preferences(oauthPage: "deviceAuthorization") {
@@ -89,16 +89,18 @@ mappings {
 }
 
 def getServerUrl() { return "https://graph.api.smartthings.com" }
+def getCallbackUrl() { "https://graph.api.smartthings.com/oauth/callback" }
+def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
 
 def authPage() {
-    def description = null          
+    def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
 			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
-        def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}"
+        def redirectUrl = buildRedirectUrl
         return dynamicPage(name: "Credentials", title: "Harmony", nextPage: null, uninstall: true, install:false) {
                section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
         }
@@ -110,7 +112,7 @@ def authPage() {
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
-        
+
 		def numFoundHub = huboptions.size() ?: 0
         def numFoundAct = actoptions.size() ?: 0
 		if((deviceRefreshCount % 5) == 0) {
@@ -120,13 +122,14 @@ def authPage() {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-            if (numFoundHub > 0 && numFoundAct > 0 && false)
+            // Virtual activity flag
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
 				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
-			}     
+			}
             if (state.resethub)
-			section("Connection to the hub timed out. Please restart the hub and try again.") {}     
-		}                       
+			section("Connection to the hub timed out. Please restart the hub and try again.") {}
+		}
     }
 }
 
@@ -138,7 +141,7 @@ def callback() {
 	} else {
 		log.warn "No authQueryString"
 	}
-	
+
 	if (state.HarmonyAccessToken) {
 		log.debug "Access token already exists"
 		discovery()
@@ -163,8 +166,8 @@ def callback() {
 
 def init() {
 	log.debug "Requesting Code"
-    def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${appSettings.callbackUrl}" ]
-    redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
+	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${callbackUrl}" ]
+	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
@@ -174,7 +177,7 @@ def receiveToken(redirectUrl = null) {
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
     ]
 	try {
-        httpPost(params) { response -> 
+        httpPost(params) { response ->
             state.HarmonyAccessToken = response.data.access_token
         }
 	} catch (java.util.concurrent.TimeoutException e) {
@@ -221,7 +224,7 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
-	
+
     def html = """
         <!DOCTYPE html>
         <html>
@@ -302,30 +305,28 @@ def buildRedirectUrl(page) {
 }
 
 def installed() {
-	enableCallback()	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {	
+	} else {
 		initialize()
 	}
 }
 
 def updated() {
 	unsubscribe()
-    unschedule()
-	enableCallback()	
+  unschedule()
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {	
+	} else {
 		initialize()
-	}   
+	}
 }
 
 def uninstalled() {
 	if (state.HarmonyAccessToken) {
-		try {	
+		try {
         	state.HarmonyAccessToken = ""
         	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
@@ -339,7 +340,7 @@ def initialize() {
 	if (selectedhubs || selectedactivities) {
 		addDevice()
         runEvery5Minutes("discovery")
-	}	
+	}
 }
 
 def getHarmonydevices() {
@@ -359,20 +360,20 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each { 
+        	it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
-           }            
+           }
         }
         state.HarmonyHubs = hubs
-        state.HarmonyActivities = activities              
-    }    
+        state.HarmonyActivities = activities
+    }
 }
 
 //CHILD DEVICE METHODS
 def discovery() {
-    def Params = [auth: state.HarmonyAccessToken]	    
+    def Params = [auth: state.HarmonyAccessToken]
     def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
@@ -384,22 +385,24 @@ def discovery() {
                 poll()
 	        } else {
             	log.debug "Error: $response.status"
-            }    
+            }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
-            state.remove("HarmonyAccessToken")        
+            state.remove("HarmonyAccessToken")
             log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
         state.resethub = true
-	}	
+ 	} catch (e) {
+		log.warn "Hostname in certificate didn't match. Please try again later."
+	}
     return null
 }
 
 def addDevice() {
-    log.trace "Adding Hubs" 
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -410,8 +413,8 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }  
-    log.trace "Adding Activities" 
+    }
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -422,7 +425,7 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }    
+    }
 }
 
 def activity(dni,mode) {
@@ -430,26 +433,26 @@ def activity(dni,mode) {
     def msg = "Command failed"
     def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"  
-    } else {    
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
+    } else {
         def aux = dni.split('-')
         def hubId = aux[1]
-        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){	
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}" 
+        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
             def activityId = aux[2]
         	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
-	}     
+	}
 	try {
-    	httpPostJson(uri: url) { response -> 
+    	httpPostJson(uri: url) { response ->
         	if (response.data.code == 200 || dni == "all") {
             	msg = "Command sent succesfully"
-            	state.aux = 0 
+            	state.aux = 0
             } else {
             	msg = "Command failed. Error: $response.data.code"
             }
-		} 
+		}
     } catch (groovyx.net.http.HttpResponseException ex) {
         log.error ex
         if (state.aux == 0) {
@@ -457,9 +460,11 @@ def activity(dni,mode) {
         	activity(dni,mode)
         } else {
         	msg = ex
-            state.aux = 0 
+            state.aux = 0
         }
-    } 
+    } catch(Exception ex) {
+    	msg = ex
+    }
     runIn(10, "poll", [overwrite: true])
     return msg
 }
@@ -468,10 +473,10 @@ def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 def map = [:]
                 response.data.hubs.each {
 		            if (it.value.message == "OK") {
@@ -484,20 +489,20 @@ def poll() {
 	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
 	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
 	                        }
-	                    }   
+	                    }
 	                } else {
 		                log.trace it.value.message
-	                }   
+	                }
                 }
-                def activities = getChildDevices() 
+                def activities = getChildDevices()
                 def activitynotrunning = true
                 activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-') 
+                    def act = activity.deviceNetworkId.split('-')
                     if (act.size() > 2) {
                         def aux = map.find { it.key == act[1] }
                         if (aux) {
                             def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)                   
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
                             if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
                                 childDevice?.sendEvent(name: "switch", value: "on")
                                 if (aux2[1] == "1")
@@ -507,28 +512,30 @@ def poll() {
                                 if (aux2[1] == "3")
                                     runIn(5, "poll", [overwrite: true])
                             }
-                        } 
-                    }    
+                        }
+                    }
                 }
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
             if (e.statusCode == 401) { // token is expired
-                state.remove("HarmonyAccessToken")        
+                state.remove("HarmonyAccessToken")
                 return "Harmony Access token has expired"
-            }    
-        }
-	}        
+            }
+		} catch(Exception e) {
+        	log.trace e
+		}
+	}
 }
 
 
 def getActivityList() {
 	// GET ACTIVITY'S NAME
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 response.data.hubs.each {
                     def hub = getChildDevice("harmony-${it.key}")
                     if (hub) {
@@ -541,17 +548,19 @@ def getActivityList() {
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
                             log.trace activities
-                        }    
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)   		
+                        }
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
 					}
-                }    
+                }
             }
         } catch (groovyx.net.http.HttpResponseException e) {
         	log.trace e
         } catch (java.net.SocketTimeoutException e) {
         	log.trace e
-        }
-    }    
+		} catch(Exception e) {
+        	log.trace e
+		}
+    }
 	return activity
 }
 
@@ -559,16 +568,16 @@ def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 actname = response.data.data.activities[activity].name
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }
-    }    
+		}
+    }
 	return actname
 }
 
@@ -576,19 +585,19 @@ def getActivityId(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actid = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
             	response.data.data.activities.each {
                 	if (it.value.name == activity)
                 		actid = it.key
-                }   
+                }
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }
-    }    
+		}
+    }
 	return actid
 }
 
@@ -596,16 +605,16 @@ def getHubName(hubId) {
 	// GET HUB'S NAME
     def hubname = hubId
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/discover?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 hubname = response.data.data.name
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }      
-    }    
+		}
+    }
 	return hubname
 }
 
@@ -616,8 +625,8 @@ def sendNotification(msg) {
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
     log.debug "request = ${request}"
-    
-    def json = request.JSON 
+
+    def json = request.JSON
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
@@ -651,12 +660,16 @@ def updateDevice() {
 	} else {
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			if (arguments) {
-				device."$command"(*arguments)
-			} else {
-				device."$command"()
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
 			}
-			render status: 204, data: "{}"
 		} else {
 			render status: 404, data: '{"msg": "Device not found"}'
 		}

smartapps/smartthings/mood-cube.src/mood-cube.groovy

@@ -79,12 +79,9 @@ def scenePage(params=[:]) {
 			href "devicePage", title: "Show Device States", params: [sceneId:sceneId], description: "", state: sceneIsDefined(sceneId) ? "complete" : "incomplete"
 		}
 
-		if (sceneId == currentSceneId) {
-			section {
-				href "saveStatesPage", title: "Record Current Device States", params: [sceneId:sceneId], description: ""
-			}
-		}
-
+        section {
+            href "saveStatesPage", title: "Record Current Device States", params: [sceneId:sceneId], description: ""
+        }
 	}
 }
 
@@ -225,7 +222,7 @@ private restoreStates(sceneId) {
 			if (type == "level") {
 				log.debug "${light.displayName} level is '$level'"
 				if (level != null) {
-					light.setLevel(value)
+					light.setLevel(level)
 				}
 			}
 			else if (type == "color") {

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -23,7 +23,7 @@ definition(
     name: "Notify Me When",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Get a push notification or text message when any of a variety of SmartThings is activated.  Supports button push, motion, contact, acceleration, moisture and presence sensors as well as switches.",
+    description: "Receive notifications when anything happens in your home.",
     category: "Convenience",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"

smartapps/smartthings/samsung-tv-connect.src/samsung-tv-connect.groovy

@@ -22,7 +22,8 @@ definition(
 	description: "Allows you to control your Samsung TV from the SmartThings app. Perform basic functions like power Off, source, volume, channels and other remote control functions.",
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/send-ham-bridge-command-when.src/send-ham-bridge-command-when.groovy

@@ -16,8 +16,8 @@
  *
  */
 definition(
-    name: "Send HAM Bridge Command When…",
-    namespace: "soletc.com",
+    name: "Send HAM Bridge Command When",
+    namespace: "smartthings",
     author: "Scottin Pollock",
     description: "Sends a command to your HAM Bridge server when SmartThings are activated.",
     category: "Convenience",
@@ -25,7 +25,6 @@ definition(
     iconX2Url: "http://solutionsetcetera.com/stuff/STIcons/HB@2x.png"
 )
 
-
 preferences {
 	section("Choose one or more, when..."){
 		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true

smartapps/smartthings/speaker-control.src/speaker-control.groovy

@@ -10,24 +10,24 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Control
+ *  Speaker Control
  *
  *  Author: SmartThings
  *
  *  Date: 2013-12-10
  */
 definition(
-    name: "Sonos Control",
+    name: "Speaker Control",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play or pause your Sonos when certain actions take place in your home.",
+    description: "Play or pause your Speaker when certain actions take place in your home.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Control your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
 			input "starting", "time", title: "Starting", required: false
@@ -81,7 +81,7 @@ def mainPage() {
 			]
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "Sonos music player", required: true
+			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false

smartapps/smartthings/speaker-mood-music.src/speaker-mood-music.groovy

@@ -10,7 +10,7 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Mood Music
+ *  Speaker Mood Music
  *
  *  Author: SmartThings
  *  Date: 2014-02-12
@@ -65,7 +65,7 @@ private saveSelectedSong() {
 }
 
 definition(
-    name: "Sonos Mood Music",
+    name: "Speaker Mood Music",
     namespace: "smartthings",
     author: "SmartThings",
     description: "Plays a selected song or station.",
@@ -75,7 +75,7 @@ definition(
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a selected song or station on your Sonos when something happens", nextPage: "chooseTrack", uninstall: true)
+	page(name: "mainPage", title: "Play a selected song or station on your Speaker when something happens", nextPage: "chooseTrack", uninstall: true)
 	page(name: "chooseTrack", title: "Select a song", install: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -125,7 +125,7 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume", description: "0-100%", required: false

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Custom Message
+ *  Speaker Custom Message
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-	name: "Sonos Notify with Sound",
+	name: "Speaker Notify with Sound",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Play a sound or custom message through your Sonos when the mode changes or other events occur.",
+	description: "Play a sound or custom message through your Speaker when the mode changes or other events occur.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a message on your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play a message on your Speaker when something happens", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -92,7 +92,7 @@ def mainPage() {
 			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after notification", required: false, defaultValue: true

smartapps/smartthings/speaker-weather-forecast.src/speaker-weather-forecast.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Weather Forecast
+ *  Speaker Weather Forecast
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-    name: "Sonos Weather Forecast",
+    name: "Speaker Weather Forecast",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play a weather report through your Sonos when the mode changes or other events occur",
+    description: "Play a weather report through your Speaker when the mode changes or other events occur",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play the weather report on your sonos", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play the weather report on your speaker", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -85,7 +85,7 @@ def mainPage() {
 			)
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after weather report finishes", required: false, defaultValue: true

smartapps/smartthings/tesla-connect.src/tesla-connect.groovy

@@ -23,7 +23,8 @@ definition(
     description: "Integrate your Tesla car with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/wattvision-manager.src/wattvision-manager.groovy

@@ -346,18 +346,20 @@ private getSensorJSON(id, key) {
 
 	def sensorUrl = "${wattvisionBaseURL()}/partners/smartthings/sensor_list?api_id=${id}&api_key=${key}"
 
-	httpGet(uri: sensorUrl) { response ->
+    httpGet(uri: sensorUrl) { response ->
 
-		def json = new org.json.JSONObject(response.data)
+		def sensors = [:]
 
-		state.sensors = json
-
-		json.each { sensorId, sensorName ->
+        response.data.each { sensorId, sensorName ->
+        	sensors[sensorId] = sensorName
 			createChild(sensorId, sensorName)
-		}
+        }
+        
+        state.sensors = sensors
 
 		return "success"
 	}
+    
 }
 
 def createChild(sensorId, sensorName) {

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -22,7 +22,8 @@ definition(
     description: "Allows you to integrate your WeMo Switch and Wemo Motion sensor with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png",
+    singleInstance: true
 )
 
 preferences {
@@ -61,10 +62,7 @@ def firstPage()
 
 		log.debug "REFRESH COUNT :: ${refreshCount}"
 
-		if(!state.subscribe) {
-			subscribe(location, null, locationHandler, [filterEvents:false])
-			state.subscribe = true
-		}
+		subscribe(location, null, locationHandler, [filterEvents:false])
 
 		//ssdp request every 25 seconds
 		if((refreshCount % 5) == 0) {
@@ -80,7 +78,7 @@ def firstPage()
 		def motionsDiscovered = motionsDiscovered()
 		def lightSwitchesDiscovered = lightSwitchesDiscovered()
 
-		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: selectedSwitches != null || selectedMotions != null || selectedLightSwitches != null) {
+		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
 			section("Select a device...") {
 				input "selectedSwitches", "enum", required:false, title:"Select Wemo Switches \n(${switchesDiscovered.size() ?: 0} found)", multiple:true, options:switchesDiscovered
 				input "selectedMotions", "enum", required:false, title:"Select Wemo Motions \n(${motionsDiscovered.size() ?: 0} found)", multiple:true, options:motionsDiscovered
@@ -168,21 +166,30 @@ def getWemoLightSwitches()
 def installed() {
 	log.debug "Installed with settings: ${settings}"
 	initialize()
-
-	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
-	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
-	runIn(900, "doDeviceSync" , [overwrite: false]) //setup ip:port syncing every 15 minutes
-
-	// SUBSCRIBE responses come back with TIMEOUT-1801 (30 minutes), so we refresh things a bit before they expire (29 minutes)
-	runIn(1740, "refresh", [overwrite: false])
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
 	initialize()
+}
 
-	runIn(5, "subscribeToDevices") //subscribe again to new/old devices wait 5 seconds
-	runIn(10, "refreshDevices") //refresh devices again, delayed by 10 seconds
+def initialize() {
+	unsubscribe()
+    unschedule()
+	subscribe(location, null, locationHandler, [filterEvents:false])
+
+	if (selectedSwitches)
+		addSwitches()
+
+	if (selectedMotions)
+		addMotions()
+
+	if (selectedLightSwitches)
+		addLightSwitches()
+
+	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
+	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
+    runEvery5Minutes("refresh")
 }
 
 def resubscribe() {
@@ -192,8 +199,7 @@ def resubscribe() {
 
 def refresh() {
 	log.debug "refresh() called"
-	//reschedule the refreshes
-	runIn(1740, "refresh", [overwrite: false])
+    doDeviceSync()
 	refreshDevices()
 }
 
@@ -236,7 +242,8 @@ def addSwitches() {
 							"port": selectedSwitch.value.port
 					]
 			])
-
+      def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -266,8 +273,9 @@ def addMotions() {
 					"port": selectedMotion.value.port
 				]
 			])
-
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+      def ipvalue = convertHexToIP(selectedMotion.value.ip)
+      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+      log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
 		}
@@ -296,7 +304,8 @@ def addLightSwitches() {
 					"port": selectedLightSwitch.value.port
 				]
 			])
-
+      def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 		   log.debug "found ${d.displayName} with id $dni already exists"
@@ -304,27 +313,6 @@ def addLightSwitches() {
 	}
 }
 
-def initialize() {
-	// remove location subscription afterwards
-	 unsubscribe()
-	 state.subscribe = false
-
-	if (selectedSwitches)
-	{
-		addSwitches()
-	}
-
-	if (selectedMotions)
-	{
-		addMotions()
-	}
-
-	if (selectedLightSwitches)
-	{
-		addLightSwitches()
-	}
-}
-
 def locationHandler(evt) {
 	def description = evt.description
 	def hub = evt?.hubId
@@ -333,53 +321,32 @@ def locationHandler(evt) {
     log.debug parsedEvent
 
 	if (parsedEvent?.ssdpTerm?.contains("Belkin:device:controllee") || parsedEvent?.ssdpTerm?.contains("Belkin:device:insight")) {
-
 		def switches = getWemoSwitches()
-
-		if (!(switches."${parsedEvent.ssdpUSN.toString()}"))
-		{ //if it doesn't already exist
+		if (!(switches."${parsedEvent.ssdpUSN.toString()}")) {
+        	//if it doesn't already exist
 			switches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else {
 			log.debug "Device was already found in state..."
-
 			def d = switches."${parsedEvent.ssdpUSN.toString()}"
 			boolean deviceChangedValues = false
-
+			log.debug "$d.ip <==> $parsedEvent.ip"
 			if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
 				d.ip = parsedEvent.ip
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
+                def child = getChildDevice(parsedEvent.mac)
+				child.subscribe(parsedEvent.ip, parsedEvent.port)
+                child.poll()
 			}
-
-			if (deviceChangedValues) {
-				def children = getChildDevices()
-				log.debug "Found children ${children}"
-				children.each {
-					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
-						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
-						it.subscribe(parsedEvent.ip, parsedEvent.port)
-					}
-				}
-			}
-
 		}
-
 	}
 	else if (parsedEvent?.ssdpTerm?.contains("Belkin:device:sensor")) {
-
 		def motions = getWemoMotions()
-
-		if (!(motions."${parsedEvent.ssdpUSN.toString()}"))
-		{ //if it doesn't already exist
+		if (!(motions."${parsedEvent.ssdpUSN.toString()}")) {
+        	//if it doesn't already exist
 			motions << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else { // just update the values
 			log.debug "Device was already found in state..."
 
 			def d = motions."${parsedEvent.ssdpUSN.toString()}"
@@ -412,10 +379,7 @@ def locationHandler(evt) {
 		if (!(lightSwitches."${parsedEvent.ssdpUSN.toString()}"))
 		{ //if it doesn't already exist
 			lightSwitches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else {
 			log.debug "Device was already found in state..."
 
 			def d = lightSwitches."${parsedEvent.ssdpUSN.toString()}"
@@ -426,21 +390,11 @@ def locationHandler(evt) {
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
+				def child = getChildDevice(parsedEvent.mac)
+				log.debug "updating ip and port, and resubscribing, for device with mac ${parsedEvent.mac}"
+				child.subscribe(parsedEvent.ip, parsedEvent.port)
 			}
-
-			if (deviceChangedValues) {
-				def children = getChildDevices()
-				log.debug "Found children ${children}"
-				children.each {
-					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
-						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
-						it.subscribe(parsedEvent.ip, parsedEvent.port)
-					}
-				}
-			}
-
 		}
-
 	}
 	else if (parsedEvent.headers && parsedEvent.body) {
 		String headerString = new String(parsedEvent.headers.decodeBase64())?.toLowerCase()
@@ -580,73 +534,30 @@ private def parseDiscoveryMessage(String description) {
 			}
 		}
 	}
-
 	device
 }
 
 def doDeviceSync(){
 	log.debug "Doing Device Sync!"
-	runIn(900, "doDeviceSync" , [overwrite: false]) //schedule to run again in 15 minutes
-
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
-
 	discoverAllWemoTypes()
 }
 
-def pollChildren() {
-	def devices = getAllChildDevices()
-	devices.each { d ->
-		//only poll switches?
-		d.poll()
-	}
+private String convertHexToIP(hex) {
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
-def delayPoll() {
-	log.debug "Executing 'delayPoll'"
-
-	runIn(5, "pollChildren")
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
 }
 
-/*def poll() {
-	log.debug "Executing 'poll'"
-	runIn(600, "poll", [overwrite: false]) //schedule to run again in 10 minutes
-
-	def lastPoll = getLastPollTime()
-	def currentTime = now()
-	def lastPollDiff = currentTime - lastPoll
-	log.debug "lastPoll: $lastPoll, currentTime: $currentTime, lastPollDiff: $lastPollDiff"
-	setLastPollTime(currentTime)
-
-	doDeviceSync()
-}
-
-
-def setLastPollTime(currentTime) {
-	state.lastpoll = currentTime
-}
-
-def getLastPollTime() {
-	state.lastpoll ?: now()
-}
-
-def now() {
-	new Date().getTime()
-}*/
-
-private Boolean canInstallLabs()
-{
+private Boolean canInstallLabs() {
 	return hasAllHubsOver("000.011.00603")
 }
 
-private Boolean hasAllHubsOver(String desiredFirmware)
-{
+private Boolean hasAllHubsOver(String desiredFirmware) {
 	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
 }
 
-private List getRealHubFirmwareVersions()
-{
+private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }

smartapps/smartthings/withings-manager.src/withings-manager.groovy

@@ -0,0 +1,775 @@
+/**
+ *  Title: Withings Service Manager
+ * 	Description: Connect Your Withings Devices
+ *
+ *  Author: steve
+ *  Date: 1/9/15
+ *
+ *
+ *  Copyright 2015 steve
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+definition(
+	name: "Withings Manager",
+	namespace: "smartthings",
+	author: "SmartThings",
+	description: "Connect With Withings",
+	category: "",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/withings.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
+	iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
+	oauth: true
+) {
+	appSetting "consumerKey"
+	appSetting "consumerSecret"
+}
+
+// ========================================================
+// PAGES
+// ========================================================
+
+preferences {
+	page(name: "authPage")
+}
+
+def authPage() {
+
+	def installOptions = false
+	def description = "Required (tap to set)"
+	def authState
+
+	if (oauth_token()) {
+		// TODO: Check if it's valid
+		if (true) {
+			description = "Saved (tap to change)"
+			installOptions = true
+			authState = "complete"
+		} else {
+			// Worth differentiating here? (no longer valid vs. non-existent state.externalAuthToken?)
+			description = "Required (tap to set)"
+		}
+	}
+
+
+	dynamicPage(name: "authPage", install: installOptions, uninstall: true) {
+		section {
+
+			if (installOptions) {
+				input(name: "withingsLabel", type: "text", title: "Add a name", description: null, required: true)
+			}
+
+			href url: shortUrl("authenticate"), style: "embedded", required: false, title: "Authenticate with Withings", description: description, state: authState
+		}
+	}
+}
+
+// ========================================================
+// MAPPINGS
+// ========================================================
+
+mappings {
+	path("/authenticate") {
+		action:
+		[
+			GET: "authenticate"
+		]
+	}
+	path("/x") {
+		action:
+		[
+			GET: "exchangeTokenFromWithings"
+		]
+	}
+	path("/n") {
+		action:
+		[POST: "notificationReceived"]
+	}
+
+	path("/test/:action") {
+		action:
+		[GET: "test"]
+	}
+}
+
+def test() {
+	"${params.action}"()
+}
+
+def authenticate() {
+	// do not hit userAuthorizationUrl when the page is executed. It will replace oauth_tokens
+	// instead, redirect through here so we know for sure that the user wants to authenticate
+	// plus, the short-lived tokens that are used during authentication are only valid for 2 minutes
+	// so make sure we give the user as much of that 2 minutes as possible to enter their credentials and deal with network latency
+	log.trace "starting Withings authentication flow"
+	redirect location: userAuthorizationUrl()
+}
+
+def exchangeTokenFromWithings() {
+	// Withings hits us here during the oAuth flow
+//	log.trace "exchangeTokenFromWithings ${params}"
+	atomicState.userid = params.userid // TODO: restructure this for multi-user access
+	exchangeToken()
+}
+
+def notificationReceived() {
+//	log.trace "notificationReceived params: ${params}"
+
+	def notificationParams = [
+		startdate: params.startdate,
+		userid   : params.userid,
+		enddate  : params.enddate,
+	]
+
+	def measures = wGetMeasures(notificationParams)
+	sendMeasureEvents(measures)
+	return [status: 0]
+}
+
+// ========================================================
+// HANDLERS
+// ========================================================
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+//	wRevokeAllNotifications()
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	if (!getChild()) { createChild() }
+	app.updateLabel(withingsLabel)
+	wCreateNotification()
+	backfillMeasures()
+}
+
+// ========================================================
+// CHILD DEVICE
+// ========================================================
+
+private getChild() {
+	def children = childDevices
+	children.size() ? children.first() : null
+}
+
+private void createChild() {
+	def child = addChildDevice("smartthings", "Withings User", userid(), null, [name: app.label, label: withingsLabel])
+	atomicState.child = [dni: child.deviceNetworkId]
+}
+
+// ========================================================
+// URL HELPERS
+// ========================================================
+
+def stBaseUrl() {
+	if (!atomicState.serverUrl) {
+		stToken()
+		atomicState.serverUrl = buildActionUrl("").split(/api\//).first()
+	}
+	return atomicState.serverUrl
+}
+
+def stToken() {
+	atomicState.accessToken ?: createAccessToken()
+}
+
+def shortUrl(path = "", urlParams = [:]) {
+	attachParams("${stBaseUrl()}api/t/${stToken()}/s/${app.id}/${path}", urlParams)
+}
+
+def noTokenUrl(path = "", urlParams = [:]) {
+	attachParams("${stBaseUrl()}api/smartapps/installations/${app.id}/${path}", urlParams)
+}
+
+def attachParams(url, urlParams = [:]) {
+	[url, toQueryString(urlParams)].findAll().join("?")
+}
+
+String toQueryString(Map m = [:]) {
+//	log.trace "toQueryString. URLEncoder will be used on ${m}"
+	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}
+
+// ========================================================
+// WITHINGS MEASURES
+// ========================================================
+
+def unixTime(date = new Date()) {
+	def unixTime = date.time / 1000 as int
+//	log.debug "converting ${date.time} to ${unixTime}"
+	unixTime
+}
+
+def backfillMeasures() {
+//	log.trace "backfillMeasures"
+	def measureParams = [startdate: unixTime(new Date() - 10)]
+	def measures = wGetMeasures(measureParams)
+	sendMeasureEvents(measures)
+}
+
+// this is body measures. // TODO: get activity and others too
+def wGetMeasures(measureParams = [:]) {
+	def baseUrl = "https://wbsapi.withings.net/measure"
+	def urlParams = [
+		action     : "getmeas",
+		userid     : userid(),
+		startdate  : unixTime(new Date() - 5),
+		enddate    : unixTime(),
+		oauth_token: oauth_token()
+	] + measureParams
+	def measureData = fetchDataFromWithings(baseUrl, urlParams)
+//	log.debug "measureData: ${measureData}"
+	measureData.body.measuregrps.collect { parseMeasureGroup(it) }.flatten()
+}
+/*
+[
+	body:[
+		measuregrps:[
+			[
+				category:1, // 1 for real measurements, 2 for user objectives.
+				grpid:310040317,
+				measures:[
+					[
+						unit:0, 	// Power of ten the "value" parameter should be multiplied to to get the real value. Eg : value = 20 and unit=-1 means the value really is 2.0
+						value:60, // Value for the measure in S.I units (kilogram, meters, etc.). Value should be multiplied by 10 to the power of "unit" (see below) to get the real value.
+						type:11   // 1 : Weight (kg), 4 : Height (meter), 5 : Fat Free Mass (kg), 6 : Fat Ratio (%), 8 : Fat Mass Weight (kg), 9 : Diastolic Blood Pressure (mmHg), 10 : Systolic Blood Pressure (mmHg), 11 : Heart Pulse (bpm), 54 : SP02(%)
+					],
+					[
+						unit:-3,
+						value:-1000,
+						type:18
+					]
+				],
+				date:1422750210,
+				attrib:2
+			]
+		],
+		updatetime:1422750227
+	],
+	status:0
+]
+*/
+
+def sendMeasureEvents(measures) {
+//	log.debug "measures: ${measures}"
+	measures.each {
+		if (it.name && it.value) {
+			sendEvent(userid(), it)
+		}
+	}
+}
+
+def parseMeasureGroup(measureGroup) {
+	long time = measureGroup.date // must be long. INT_MAX is too small
+	time *= 1000
+	measureGroup.measures.collect { parseMeasure(it) + [date: new Date(time)] }
+}
+
+def parseMeasure(measure) {
+//	log.debug "parseMeasure($measure)"
+	[
+		name : measureAttribute(measure),
+		value: measureValue(measure)
+	]
+}
+
+def measureValue(measure) {
+	def value = measure.value * 10.power(measure.unit)
+	if (measure.type == 1) { // Weight (kg)
+		value *= 2.20462262 // kg to lbs
+	}
+	value
+}
+
+String measureAttribute(measure) {
+	def attribute = ""
+	switch (measure.type) {
+		case 1: attribute = "weight"; break;
+		case 4: attribute = "height"; break;
+		case 5: attribute = "leanMass"; break;
+		case 6: attribute = "fatRatio"; break;
+		case 8: attribute = "fatMass"; break;
+		case 9: attribute = "diastolicPressure"; break;
+		case 10: attribute = "systolicPressure"; break;
+		case 11: attribute = "heartPulse"; break;
+		case 54: attribute = "SP02"; break;
+	}
+	return attribute
+}
+
+String measureDescription(measure) {
+	def description = ""
+	switch (measure.type) {
+		case 1: description = "Weight (kg)"; break;
+		case 4: description = "Height (meter)"; break;
+		case 5: description = "Fat Free Mass (kg)"; break;
+		case 6: description = "Fat Ratio (%)"; break;
+		case 8: description = "Fat Mass Weight (kg)"; break;
+		case 9: description = "Diastolic Blood Pressure (mmHg)"; break;
+		case 10: description = "Systolic Blood Pressure (mmHg)"; break;
+		case 11: description = "Heart Pulse (bpm)"; break;
+		case 54: description = "SP02(%)"; break;
+	}
+	return description
+}
+
+// ========================================================
+// WITHINGS NOTIFICATIONS
+// ========================================================
+
+def wNotificationBaseUrl() { "https://wbsapi.withings.net/notify" }
+
+def wNotificationCallbackUrl() { shortUrl("n") }
+
+def wGetNotification() {
+	def userId = userid()
+	def url = wNotificationBaseUrl()
+	def params = [
+		action: "subscribe"
+	]
+
+}
+
+// TODO: keep track of notification expiration
+def wCreateNotification() {
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "subscribe",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token(),
+		comment    : "hmm" // TODO: figure out what to do here. spaces seem to break the request
+	]
+
+	fetchDataFromWithings(baseUrl, urlParams)
+}
+
+def wRevokeAllNotifications() {
+	def notifications = wListNotifications()
+	notifications.each {
+		wRevokeNotification([callbackurl: it.callbackurl]) // use the callbackurl Withings has on file
+	}
+}
+
+def wRevokeNotification(notificationParams = [:]) {
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "revoke",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token()
+	] + notificationParams
+
+	fetchDataFromWithings(baseUrl, urlParams)
+}
+
+def wListNotifications() {
+
+	/*
+	{
+		body: {
+			profiles: [
+				{
+					appli: 1,
+					expires: 2147483647,
+					callbackurl: "https://graph.api.smartthings.com/api/t/72ab3e57-5839-4cca-9562-dcc818f83bc9/s/537757a0-c4c8-40ea-8cea-aa283915bbd9/n",
+					comment: "hmm"
+				}
+			]
+		},
+		status: 0
+	}*/
+
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "list",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token()
+	]
+
+	def notificationData = fetchDataFromWithings(baseUrl, urlParams)
+	notificationData.body.profiles
+}
+
+def defaultOauthParams() {
+	defaultParameterKeys().inject([:]) { keyMap, currentKey ->
+		keyMap[currentKey] = "${currentKey}"()
+		keyMap
+	}
+}
+
+// ========================================================
+// WITHINGS DATA FETCHING
+// ========================================================
+
+def fetchDataFromWithings(baseUrl, urlParams) {
+
+//	log.debug "fetchDataFromWithings(${baseUrl}, ${urlParams})"
+
+	def defaultParams = defaultOauthParams()
+	def paramStrings = buildOauthParams(urlParams + defaultParams)
+//	log.debug "paramStrings: $paramStrings"
+	def url = buildOauthUrl(baseUrl, paramStrings, oauth_token_secret())
+	def json
+//	log.debug "about to make request to ${url}"
+	httpGet(uri: url, headers: ["Content-Type": "application/json"]) { response ->
+		json = new groovy.json.JsonSlurper().parse(response.data)
+	}
+	return json
+}
+
+// ========================================================
+// WITHINGS OAUTH LOGGING
+// ========================================================
+
+def wLogEnabled() { false } // For troubleshooting Oauth flow
+
+void wLog(message = "") {
+	if (!wLogEnabled()) { return }
+	def wLogMessage = atomicState.wLogMessage
+	if (wLogMessage.length()) {
+		wLogMessage += "\n|"
+	}
+	wLogMessage += message
+	atomicState.wLogMessage = wLogMessage
+}
+
+void wLogNew(seedMessage = "") {
+	if (!wLogEnabled()) { return }
+	def olMessage = atomicState.wLogMessage
+	if (oldMessage) {
+		log.debug "purging old wLogMessage: ${olMessage}"
+	}
+	atomicState.wLogMessage = seedMessage
+}
+
+String wLogMessage() {
+	if (!wLogEnabled()) { return }
+	def wLogMessage = atomicState.wLogMessage
+	atomicState.wLogMessage = ""
+	wLogMessage
+}
+
+// ========================================================
+// WITHINGS OAUTH DESCRIPTION
+// >>>>>>	The user opens the authPage for this SmartApp
+// STEP 1 get a token to be used in the url the user taps
+// STEP 2 generate the url to be tapped by the user
+// >>>>>>	The user taps the url and logs in to Withings
+// STEP 3 generate a token to be used for accessing user data
+// STEP 4 access user data
+// ========================================================
+
+// ========================================================
+// WITHINGS OAUTH STEP 1: get an oAuth "request token"
+// ========================================================
+
+def requestTokenUrl() {
+	wLogNew "WITHINGS OAUTH STEP 1: get an oAuth 'request token'"
+
+	def keys = defaultParameterKeys() + "oauth_callback"
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/request_token", paramStrings, "")
+}
+
+// ========================================================
+// WITHINGS OAUTH STEP 2: End-user authorization
+// ========================================================
+
+def userAuthorizationUrl() {
+
+	// get url from Step 1
+	def tokenUrl = requestTokenUrl()
+
+	// collect token from Withings
+	collectTokenFromWithings(tokenUrl)
+
+	wLogNew "WITHINGS OAUTH STEP 2: End-user authorization"
+
+	def keys = defaultParameterKeys() + "oauth_token"
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/authorize", paramStrings, oauth_token_secret())
+}
+
+// ========================================================
+// WITHINGS OAUTH STEP 3: Generating access token
+// ========================================================
+
+def exchangeTokenUrl() {
+	wLogNew "WITHINGS OAUTH STEP 3: Generating access token"
+
+	def keys = defaultParameterKeys() + ["oauth_token", "userid"]
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/access_token", paramStrings, oauth_token_secret())
+}
+
+def exchangeToken() {
+
+	def tokenUrl = exchangeTokenUrl()
+//	log.debug "about to hit ${tokenUrl}"
+
+	try {
+		// replace old token with a long-lived token
+		def token = collectTokenFromWithings(tokenUrl)
+//		log.debug "collected token from Withings: ${token}"
+		renderAction("authorized", "Withings Connection")
+	}
+	catch (Exception e) {
+		log.error e
+		renderAction("notAuthorized", "Withings Connection Failed")
+	}
+}
+
+// ========================================================
+// OAUTH 1.0
+// ========================================================
+
+def defaultParameterKeys() {
+	[
+		"oauth_consumer_key",
+		"oauth_nonce",
+		"oauth_signature_method",
+		"oauth_timestamp",
+		"oauth_version"
+	]
+}
+
+def oauth_consumer_key() { consumerKey }
+
+def oauth_nonce() { nonce() }
+
+def nonce() { UUID.randomUUID().toString().replaceAll("-", "") }
+
+def oauth_signature_method() { "HMAC-SHA1" }
+
+def oauth_timestamp() { (int) (new Date().time / 1000) }
+
+def oauth_version() { 1.0 }
+
+def oauth_callback() { shortUrl("x") }
+
+def oauth_token() { atomicState.wToken?.oauth_token }
+
+def oauth_token_secret() { atomicState.wToken?.oauth_token_secret }
+
+def userid() { atomicState.userid }
+
+String hmac(String oAuthSignatureBaseString, String oAuthSecret) throws java.security.SignatureException {
+	if (!oAuthSecret.contains("&")) { log.warn "Withings requires \"&\" to be included no matter what" }
+	// get an hmac_sha1 key from the raw key bytes
+	def signingKey = new javax.crypto.spec.SecretKeySpec(oAuthSecret.getBytes(), "HmacSHA1")
+	// get an hmac_sha1 Mac instance and initialize with the signing key
+	def mac = javax.crypto.Mac.getInstance("HmacSHA1")
+	mac.init(signingKey)
+	// compute the hmac on input data bytes
+	byte[] rawHmac = mac.doFinal(oAuthSignatureBaseString.getBytes())
+	return org.apache.commons.codec.binary.Base64.encodeBase64String(rawHmac)
+}
+
+Map parseResponseString(String responseString) {
+//	log.debug "parseResponseString: ${responseString}"
+	responseString.split("&").inject([:]) { c, it ->
+		def parts = it.split('=')
+		def k = parts[0]
+		def v = parts[1]
+		c[k] = v
+		return c
+	}
+}
+
+String applyParams(endpoint, oauthParams) { endpoint + "?" + oauthParams.sort().join("&") }
+
+String buildSignature(endpoint, oAuthParams, oAuthSecret) {
+	def oAuthSignatureBaseParts = ["GET", endpoint, oAuthParams.join("&")]
+	def oAuthSignatureBaseString = oAuthSignatureBaseParts.collect { URLEncoder.encode(it) }.join("&")
+	wLog "    ==> oAuth signature base string : \n${oAuthSignatureBaseString}"
+	wLog "    .. applying hmac-sha1 to base string, with secret : ${oAuthSecret} (notice the \"&\")"
+	wLog "    .. base64 encode then url-encode the hmac-sha1 hash"
+	String hmacResult = hmac(oAuthSignatureBaseString, oAuthSecret)
+	def signature = URLEncoder.encode(hmacResult)
+	wLog "    ==> oauth_signature = ${signature}"
+	return signature
+}
+
+List buildOauthParams(List parameterKeys) {
+	wLog "    .. adding oAuth parameters : "
+	def oauthParams = []
+	parameterKeys.each { key ->
+		def value = "${key}"()
+		wLog "        ${key} = ${value}"
+		oauthParams << "${key}=${URLEncoder.encode(value.toString())}"
+	}
+
+	wLog "    .. sorting all request parameters alphabetically "
+	oauthParams.sort()
+}
+
+List buildOauthParams(Map parameters) {
+	wLog "    .. adding oAuth parameters : "
+	def oauthParams = []
+	parameters.each { k, v ->
+		wLog "        ${k} = ${v}"
+		oauthParams << "${k}=${URLEncoder.encode(v.toString())}"
+	}
+
+	wLog "    .. sorting all request parameters alphabetically "
+	oauthParams.sort()
+}
+
+String buildOauthUrl(String endpoint, List parameterStrings, String oAuthTokenSecret) {
+	wLog "Api endpoint : ${endpoint}"
+
+	wLog "Signing request :"
+	def oAuthSecret = "${consumerSecret}&${oAuthTokenSecret}"
+	def signature = buildSignature(endpoint, parameterStrings, oAuthSecret)
+
+	parameterStrings << "oauth_signature=${signature}"
+
+	def finalUrl = applyParams(endpoint, parameterStrings)
+	wLog "Result: ${finalUrl}"
+	if (wLogEnabled()) {
+		log.debug wLogMessage()
+	}
+	return finalUrl
+}
+
+def collectTokenFromWithings(tokenUrl) {
+	// get token from Withings using the url generated in Step 1
+	def tokenString
+	httpGet(uri: tokenUrl) { resp -> // oauth_token=<token_key>&oauth_token_secret=<token_secret>
+		tokenString = resp.data.toString()
+//		log.debug "collectTokenFromWithings: ${tokenString}"
+	}
+	def token = parseResponseString(tokenString)
+	atomicState.wToken = token
+	return token
+}
+
+// ========================================================
+// APP SETTINGS
+// ========================================================
+
+def getConsumerKey() { appSettings.consumerKey }
+
+def getConsumerSecret() { appSettings.consumerSecret }
+
+// figure out how to put this in settings
+def getUserId() { atomicState.wToken?.userid }
+
+// ========================================================
+// HTML rendering
+// ========================================================
+
+def renderAction(action, title = "") {
+	log.debug "renderAction: $action"
+	renderHTML(title) {
+		head { "${action}HtmlHead"() }
+		body { "${action}HtmlBody"() }
+	}
+}
+
+def authorizedHtmlHead() {
+	log.trace "authorizedHtmlHead"
+	"""
+		<style type="text/css">
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				/*width: 560px;
+				padding: 40px;*/
+				/*background: #eee;*/
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+							max-width:20%;
+			}
+			img:nth-child(2) {
+				margin: 0 30px;
+			}
+			p {
+				/*font-size: 1.2em;*/
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				padding: 0 10px;
+				margin-bottom: 0;
+			}
+		/*
+			p:last-child {
+				margin-top: 0px;
+			}
+		*/
+			span {
+				font-family: 'Swiss 721 W01 Light';
+			}
+		</style>
+		"""
+}
+
+def authorizedHtmlBody() {
+	"""
+		<div class="container">
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/withings@2x.png" alt="withings icon" />
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+			<p>Your Withings scale is now connected to SmartThings!</p>
+			<p>Click 'Done' to finish setup.</p>
+		</div>
+		"""
+}
+
+def notAuthorizedHtmlHead() {
+	log.trace "notAuthorizedHtmlHead"
+	authorizedHtmlHead()
+}
+
+def notAuthorizedHtmlBody() {
+	"""
+		<div class="container">
+			<p>There was an error connecting to SmartThings!</p>
+			<p>Click 'Done' to try again.</p>
+		</div>
+		"""
+}

smartapps/smartthings/withings.src/withings.groovy

@@ -24,7 +24,8 @@ definition(
     category: "Connections",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/withings.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/smartthings/yoics-connect.src/yoics-connect.groovy

@@ -24,7 +24,8 @@ definition(
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ) {
   appSetting "serverUrl"
 }

smartapps/sprayercontroller/sprayer-controller-2.src/sprayer-controller-2.groovy

@@ -15,7 +15,7 @@
  */
 definition(
     name: "Sprayer Controller 2",
-    namespace: "",
+    namespace: "sprayercontroller",
     author: "Cooper Lee",
     description: "Control Sprayers for a period of time a number of times per hour",
     category: "My Apps",

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -1,4 +1,4 @@
-    /**
+/**
      *  Magic Home
      *
      *  Copyright 2014 Tim Slagle
@@ -198,7 +198,7 @@
     
     //set home mode when house is occupied
     def setHome() {
-    
+    sendOutOfDateNotification()
     log.info("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
@@ -319,3 +319,14 @@
     private hideOptionsSection() {
     	(starting || ending || days || modes) ? false : true
     }
+    
+    def sendOutOfDateNotification(){
+    	if(!state.lastTime){
+    		state.lastTime = (new Date() + 31).getTime()
+            sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
+        }
+        else if (((new Date()).getTime()) >= state.lastTime){
+        	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
+        	state.lastTime = (new Date() + 31).getTime()
+        }
+    }

smartapps/tslagle13/routine-director.src/routine-director.groovy

@@ -0,0 +1,346 @@
+/**
+ *  Rotuine Director
+ *
+ *
+ *  Changelog
+ *
+ *  2015-09-01
+ *     --Added Contact Book
+ *     --Removed references to phrases and replaced with routines
+ *     --Added bool logic to inputs instead of enum for "yes" "no" options
+ *     --Fixed halting error with code installation
+ *
+ *  Copyright 2015 Tim Slagle
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Routine Director",
+    namespace: "tslagle13",
+    author: "Tim Slagle",
+    description: "Monitor a set of presence sensors and activate routines based on whether your home is empty or occupied.  Each presence status change will check against the current 'sun state' to run routines based on occupancy and whether the sun is up or down.",
+    category: "Convenience",
+    iconUrl: "http://icons.iconarchive.com/icons/icons8/ios7/512/Very-Basic-Home-Filled-icon.png",
+    iconX2Url: "http://icons.iconarchive.com/icons/icons8/ios7/512/Very-Basic-Home-Filled-icon.png"
+)
+
+preferences {
+    page(name: "selectRoutines")
+
+    page(name: "Settings", title: "Settings", uninstall: true, install: true) {
+        section("False alarm threshold (defaults to 10 min)") {
+            input "falseAlarmThreshold", "decimal", title: "Number of minutes", required: false
+        }
+
+        section("Zip code (for sunrise/sunset)") {
+            input "zip", "text", required: true
+        }
+
+        section("Notifications") {
+            input "sendPushMessage", "bool", title: "Send notifications when house is empty?"
+            input "sendPushMessageHome", "bool", title: "Send notifications when home is occupied?"
+        }
+        section("Send Notifications?") {
+            input("recipients", "contact", title: "Send notifications to") {
+                input "phone", "phone", title: "Send an SMS to this number?", required:false
+            }
+        }
+
+        section(title: "More options", hidden: hideOptionsSection(), hideable: true) {
+            label title: "Assign a name", required: false
+            input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+                options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+            input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+        }
+    }
+}
+
+def selectRoutines() {
+    def configured = (settings.awayDay && settings.awayNight && settings.homeDay && settings.homeNight)
+    dynamicPage(name: "selectRoutines", title: "Configure", nextPage: "Settings", uninstall: true) {
+        section("Who?") {
+            input "people", "capability.presenceSensor", title: "Monitor These Presences", required: true, multiple: true, submitOnChange: true
+        }
+
+        def routines = location.helloHome?.getPhrases()*.label
+        if (routines) {
+            routines.sort()
+            section("Run This Routine When...") {
+                    log.trace routines
+                    input "awayDay", "enum", title: "Everyone Is Away And It's Day", required: true, options: routines, submitOnChange: true
+                    input "awayNight", "enum", title: "Everyone Is Away And It's Night", required: true, options: routines, submitOnChange: true
+                    input "homeDay", "enum", title: "At Least One Person Is Home And It's Day", required: true, options: routines, submitOnChange: true
+                    input "homeNight", "enum", title: "At Least One Person Is Home And It's Night", required: true, options: routines, submitOnChange: true
+                }
+                /*    section("Select modes used for each condition.") { This allows the director to know which rotuine has already been ran so it does not run again if someone else comes home. 
+        input "homeModeDay", "mode", title: "Select Mode Used for 'Home Day'", required: true
+        input "homeModeNight", "mode", title: "Select Mode Used for 'Home Night'", required: true
+    }*/
+        }
+    }
+}
+
+def installed() {
+	log.debug "Updated with settings: ${settings}"
+    initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+    subscribe(people, "presence", presence)
+    checkSun()
+    subscribe(location, "sunrise", setSunrise)
+    subscribe(location, "sunset", setSunset)
+    state.homestate = null
+}
+
+//check current sun state when installed.
+def checkSun() {
+    def zip = settings.zip as String
+    def sunInfo = getSunriseAndSunset(zipCode: zip)
+    def current = now()
+
+    if (sunInfo.sunrise.time < current && sunInfo.sunset.time > current) {
+        state.sunMode = "sunrise"
+        runIn(60,"setSunrise")
+    }
+    else {
+        state.sunMode = "sunset"
+        runIn(60,"setSunset")
+    }
+}
+
+//change to sunrise mode on sunrise event
+def setSunrise(evt) {
+    state.sunMode = "sunrise";
+    changeSunMode(newMode);
+    log.debug "Current sun mode is ${state.sunMode}"
+}
+
+//change to sunset mode on sunset event
+def setSunset(evt) {
+    state.sunMode = "sunset";
+    changeSunMode(newMode)
+    log.debug "Current sun mode is ${state.sunMode}"
+}
+
+//change mode on sun event
+def changeSunMode(newMode) {
+    if (allOk) {
+
+        if (everyoneIsAway()) /*&& (state.sunMode == "sunrise")*/ {
+            log.info("Home is Empty  Setting New Away Mode")
+            def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
+            setAway()
+        }
+/*
+        else if (everyoneIsAway() && (state.sunMode == "sunset")) {
+            log.info("Home is Empty  Setting New Away Mode")
+            def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
+            setAway()
+        }*/
+        else if (anyoneIsHome()) {
+            log.info("Home is Occupied Setting New Home Mode")
+            setHome()
+
+
+        }
+    }
+}
+
+//presence change run logic based on presence state of home
+def presence(evt) {
+    if (allOk) {
+        if (evt.value == "not present") {
+            log.debug("Checking if everyone is away")
+
+            if (everyoneIsAway()) {
+                log.info("Nobody is home, running away sequence")
+                def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
+                runIn(delay, "setAway")
+            }
+        }
+        else {
+            def lastTime = state[evt.deviceId]
+            if (lastTime == null || now() - lastTime >= 1 * 60000) {
+                log.info("Someone is home, running home sequence")
+                setHome()
+            }
+            state[evt.deviceId] = now()
+
+        }
+    }
+}
+
+//if empty set home to one of the away modes
+def setAway() {
+    if (everyoneIsAway()) {
+        if (state.sunMode == "sunset") {
+            def message = "Performing \"${awayNight}\" for you as requested."
+            log.info(message)
+            sendAway(message)
+            location.helloHome.execute(settings.awayNight)
+            state.homestate = "away"
+
+        }
+        else if (state.sunMode == "sunrise") {
+            def message = "Performing \"${awayDay}\" for you as requested."
+            log.info(message)
+            sendAway(message)
+            location.helloHome.execute(settings.awayDay)
+            state.homestate = "away"
+        }
+        else {
+            log.debug("Mode is the same, not evaluating")
+        }
+    }
+}
+
+//set home mode when house is occupied
+def setHome() {
+    log.info("Setting Home Mode!!")
+    if (anyoneIsHome()) {
+        if (state.sunMode == "sunset") {
+            if (state.homestate != "homeNight") {
+                def message = "Performing \"${homeNight}\" for you as requested."
+                log.info(message)
+                sendHome(message)
+                location.helloHome.execute(settings.homeNight)
+                state.homestate = "homeNight"
+            }
+        }
+
+        if (state.sunMode == "sunrise") {
+            if (state.homestate != "homeDay") {
+                def message = "Performing \"${homeDay}\" for you as requested."
+                log.info(message)
+                sendHome(message)
+                location.helloHome.execute(settings.homeDay)
+                state.homestate = "homeDay"
+            }
+        }
+    }
+}
+
+private everyoneIsAway() {
+  def result = true
+
+  if(people.findAll { it?.currentPresence == "present" }) {
+    result = false
+  }
+
+  log.debug("everyoneIsAway: ${result}")
+
+  return result
+}
+
+private anyoneIsHome() {
+  def result = false
+
+  if(people.findAll { it?.currentPresence == "present" }) {
+    result = true
+  }
+
+  log.debug("anyoneIsHome: ${result}")
+
+  return result
+}
+
+def sendAway(msg) {
+    if (sendPushMessage) {
+    	if (recipients) {
+        	sendNotificationToContacts(msg, recipients)
+        }
+        else {
+        	sendPush(msg)
+        	if(phone){
+            		sendSms(phone, msg)
+        	}	
+        }    
+    }
+
+    log.debug(msg)
+}
+
+def sendHome(msg) {
+    if (sendPushMessageHome) {
+    	if (recipients) {
+        	sendNotificationToContacts(msg, recipients)
+        }
+        else {
+        	sendPush(msg)
+                if(phone){
+            		sendSms(phone, msg)
+        	}
+        }    
+    }
+
+    log.debug(msg)
+}
+
+private getAllOk() {
+    modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+    def result = !modes || modes.contains(location.mode)
+    log.trace "modeOk = $result"
+    result
+}
+
+private getDaysOk() {
+    def result = true
+    if (days) {
+        def df = new java.text.SimpleDateFormat("EEEE")
+        if (location.timeZone) {
+            df.setTimeZone(location.timeZone)
+        }
+        else {
+            df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+        }
+        def day = df.format(new Date())
+        result = days.contains(day)
+    }
+    log.trace "daysOk = $result"
+    result
+}
+
+private getTimeOk() {
+    def result = true
+    if (starting && ending) {
+        def currTime = now()
+        def start = timeToday(starting, location?.timeZone).time
+        def stop = timeToday(ending, location?.timeZone).time
+        result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+    }
+    log.trace "timeOk = $result"
+    result
+}
+
+private hhmm(time, fmt = "h:mm a") {
+    def t = timeToday(time, location.timeZone)
+    def f = new java.text.SimpleDateFormat(fmt)
+    f.setTimeZone(location.timeZone?:timeZone(time))
+    f.format(t)
+}
+
+private getTimeIntervalLabel() {
+    (starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z"): ""
+}
+
+private hideOptionsSection() {
+    (starting || ending || days || modes) ? false: true
+}

smartapps/tslagle13/thermostat-mode-director.src/thermostat-mode-director.groovy

@@ -622,7 +622,7 @@ def greyedOutTime(starting, ending){
     }
     result
 }
-
+	
 private anyoneIsHome() {
   def result = false
 
@@ -634,10 +634,10 @@ private anyoneIsHome() {
 
   return result
 }
-
+	
 page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
 			input "starting", "time", title: "Starting (both are required)", required: false 
 			input "ending", "time", title: "Ending (both are required)", required: false 
 		}
-        }
+        }

smartapps/wackford/quirky-connect.src/quirky-connect.groovy

@@ -58,7 +58,8 @@ definition(
     description: "Connect your Quirky to SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png",
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/wackford/tcp-bulbs-connect.src/tcp-bulbs-connect.groovy

@@ -25,7 +25,8 @@ definition(
 	description: "Connect your TCP bulbs to SmartThings using Cloud to Cloud integration. You must create a remote login acct on TCP Mobile App.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png"
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png",
+	singleInstance: true
 )
 
 

smartapps/weatherbug/weatherbug-home.src/weatherbug-home.groovy

@@ -0,0 +1,307 @@
+/**
+ *  WeatherBug Home
+ *
+ *  Copyright 2015 WeatherBug
+ *
+ */
+definition(
+    name: "WeatherBug Home",
+    namespace: "WeatherBug",
+    author: "WeatherBug Home",
+    description: "WeatherBug Home",
+    category: "My Apps",
+    iconUrl: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughomemedium.png",
+    iconX2Url: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughomemedium.png",
+    iconX3Url: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughome.png",
+    oauth: [displayName: "WeatherBug Home", displayLink: "http://weatherbughome.com/"])
+
+
+preferences {
+        section("Select thermostats") {
+        input "thermostatDevice", "capability.thermostat", multiple: true
+    }
+}
+
+mappings {
+  path("/appInfo") {    action: [      GET: "getAppInfo"    ]  }
+  path("/getLocation") {    action: [      GET: "getLoc"    ]  }
+  path("/currentReport/:id") {    action: [      GET: "getCurrentReport"    ]  }
+  path("/setTemp/:temp/:id") {    action: [      POST: "setTemperature", GET: "setTemperature"    ]  }
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * data from the installed SmartApp, including the location data, and 
+ * a list of the devices that were authorized to be accessed.  The WeatherBug
+ * Home Service will leverage this data to represent the connected devices as well as their
+ * location and associated the data with a WeatherBug user account.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ * @return Location, including id, latitude, longitude, zip code, and name, and the list of devices
+ */
+def getAppInfo() {
+   def devices = thermostatDevice
+   def lat = location.latitude
+   def lon = location.longitude
+   if(!(devices instanceof Collection))
+   {
+     devices = [devices]
+   }
+   return [
+   			Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+   			Result: [ "Devices": devices, 
+   			"Location":[
+            	"Id": location.id, 
+            	"Latitude":lat,
+            	"Longitude":lon,
+            	"ZipCode":location.zipCode,
+            	"Name":location.name
+                ]
+            ]
+         ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * location data from the installed SmartApp.  The WeatherBug
+ * Home Service will leverage this data to associate the location to a WeatherBug Home account
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @return Location, including id, latitude, longitude, zip code, and name
+ */
+def getLoc() {
+   return [
+   		Id: UUID.randomUUID().toString(),
+        Code: 200,
+        ErrorMessage: null,
+        Result: [
+        "Id": location.id, 
+        "Latitude":location.latitude,
+        "Longitude":location.longitude,
+        "ZipCode":location.zipCode,
+        "Name":location.name]
+    ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * thermostat data and store it for display to a WeatherBug user.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @param id The id of the device to get data for
+ * @return Thermostat data including temperature, set points, running modes, and operating states
+ */
+def getCurrentReport() {
+	log.debug "device id parameter=" + params.id
+    def unixTime = (int)((new Date().getTime() / 1000))
+    def device = thermostatDevice.find{ it.id == params.id}
+    
+    if(device == null)
+    {
+    	return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 404,
+            ErrorMessage: "Device not found. id=" + params.id,
+            Result: null
+        ]
+    }
+    return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+            Result: [
+                DeviceId: device.id, 
+                LocationId: location.id, 
+                ReportType: 2, 
+                ReportList: [ 
+                    [Key: "Temperature", Value: GetOrDefault(device, "temperature")], 
+                	[Key: "ThermostatSetpoint", Value: GetOrDefault(device, "thermostatSetpoint")],
+                    [Key: "CoolingSetpoint", Value: GetOrDefault(device, "coolingSetpoint")],
+                    [Key: "HeatingSetpoint", Value: GetOrDefault(device, "heatingSetpoint")],
+                    [Key: "ThermostatMode", Value: GetOrDefault(device, "thermostatMode")],
+                    [Key: "ThermostatFanMode", Value: GetOrDefault(device, "thermostatFanMode")],
+                    [Key: "ThermostatOperatingState", Value: GetOrDefault(device, "thermostatOperatingState")]
+                ],
+                UnixTime: unixTime
+            ]
+        ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to set
+ * the thermostat setpoint.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @param id The id of the device to set
+ * @return Indication of whether the operation succeeded or failed
+ 
+def setTemperature() {
+	log.debug "device id parameter=" + params.id
+	def device = thermostatDevice.find{ it.id == params.id}
+    if(device != null)
+    {
+        def mode = device.latestState('thermostatMode').stringValue
+        def value = params.temp as Integer
+        log.trace "Suggested temperature: $value, $mode"
+        if ( mode == "cool")
+            device.setCoolingSetpoint(value)
+        else if ( mode == "heat")
+            device.setHeatingSetpoint(value)           
+        return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+            Result: null
+        ]
+    }
+    return [
+        	Id: UUID.randomUUID().toString(),
+            Code : 404,
+            ErrorMessage: "Device not found. id=" + params.id,
+            Result: null
+        ]
+}
+*/
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+/**
+ * The updated event will be pushed to a WeatherBug Home Service to notify the system to take appropriate action.
+ * Data that will be sent includes the list of devices, and location data
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+    log.debug "Updated with state: ${state}"
+	log.debug "Updated with location ${location} ${location.id} ${location.name}"
+    unsubscribe()
+    initialize()
+	def postParams = [
+		uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive/smartapp/update',
+		body:  [ 
+			"Devices": devices, 
+			"Location":[
+				"Id": location.id, 
+				"Latitude":location.latitude,
+				"Longitude":location.longitude,
+				"ZipCode":location.zipCode,
+				"Name":location.name
+			]
+	   ]
+    ]
+    sendToWeatherBug(postParams)
+}
+
+/*
+* Subscribe to changes on the thermostat attributes
+*/
+def initialize() {
+	log.trace "initialize enter"
+    subscribe(thermostatDevice, "heatingSetpoint", pushLatest)
+    subscribe(thermostatDevice, "coolingSetpoint", pushLatest)
+    subscribe(thermostatDevice, "thermostatSetpoint", pushLatest)
+    subscribe(thermostatDevice, "thermostatMode", pushLatest)
+    subscribe(thermostatDevice, "thermostatFanMode", pushLatest)
+    subscribe(thermostatDevice, "thermostatOperatingState", pushLatest)
+    subscribe(thermostatDevice, "temperature", pushLatest)
+}
+
+/**
+ * The uninstall event will be pushed to a WeatherBug Home Service to notify the system to take appropriate action.
+ * Data that will be sent includes the list of devices, and location data
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def uninstalled() {
+	log.trace "uninstall entered"
+    def postParams = [
+    	uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive/smartapp/delete',
+        body:  [ 
+        	"Devices": devices, 
+            "Location":[
+                "Id": location.id, 
+                "Latitude":location.latitude,
+                "Longitude":location.longitude,
+                "ZipCode":location.zipCode,
+                "Name":location.name
+            ]
+       ]
+    ]
+    sendToWeatherBug(postParams)
+}
+
+/**
+ * This method will push the latest thermostat data to the WeatherBug Home Service so it can store
+ * and display the data to the WeatherBug user.  Data pushed includes the thermostat data as well
+ * as location id.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def pushLatest(evt) {
+	def unixTime = (int)((new Date().getTime() / 1000))
+    def device = thermostatDevice.find{ it.id == evt.deviceId}
+    def postParams = [
+        uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive',
+        body: [
+        	DeviceId: evt.deviceId, 
+            LocationId: location.id,
+            ReportType: 2, 
+            ReportList: [ 
+        		[Key: "Temperature", Value: GetOrDefault(device, "temperature")], 
+                [Key: "ThermostatSetpoint", Value: GetOrDefault(device, "thermostatSetpoint")],
+        		[Key: "CoolingSetpoint", Value: GetOrDefault(device, "coolingSetpoint")],
+        		[Key: "HeatingSetpoint", Value: GetOrDefault(device, "heatingSetpoint")],
+                [Key: "ThermostatMode", Value: GetOrDefault(device, "thermostatMode")],
+                [Key: "ThermostatFanMode", Value: GetOrDefault(device, "thermostatFanMode")],
+                [Key: "ThermostatOperatingState", Value: GetOrDefault(device, "thermostatOperatingState")]
+        	], 
+            UnixTime: unixTime
+        ]
+    ]
+    log.debug postParams
+    sendToWeatherBug(postParams)
+}
+
+/*
+* This method attempts to get the value of a device attribute, but if an error occurs null is returned
+* @return The device attribute value, or null
+*/
+def GetOrDefault(device, attrib)
+{
+	def val
+ 	try{
+    	val = device.latestValue(attrib)
+    
+    }catch(ex)
+    {
+        log.debug "Failed to get attribute " + attrib + " from device " + device
+        val = null
+    }
+    return val
+}
+
+/*
+* Convenience method that sends data to WeatherBug, logging any exceptions that may occur
+* Privacy Policy: http://weatherbughome.com/privacy/
+*/
+def sendToWeatherBug(postParams)
+{
+ 	try{
+    	log.debug postParams
+        httpPostJson(postParams) { resp ->
+        	resp.headers.each {
+           log.debug "${it.name} : ${it.value}"
+        }
+        log.debug "response contentType: ${resp.contentType}"
+        log.debug "response data: ${resp.data}"
+        }
+        log.debug "Communication with WeatherBug succeeded";
+    
+    }catch(ex)
+    {
+        log.debug "Communication with WeatherBug failed.\n${ex}";
+    }
+}