MSA-1574: descricao

[CHF-441] Added Health Check Implementation for WeMo LED Bulb

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -28,17 +28,6 @@ metadata {
 
 	}
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -54,103 +43,54 @@ metadata {
 				attributeState "power", label:'${currentValue} W'
 			}
 		}
-		
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
 		main "switch"
-		details(["switch","refresh"])
+		details(["switch", "refresh"])
 	}
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.debug "Parse description $description"
-	def name = null
-	def value = null
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-	} else if (description?.startsWith("read attr -")) {
-		def descMap = parseDescriptionAsMap(description)
-		log.debug "Read attr: $description"
-		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
-			name = "switch"
-			value = descMap.value.endsWith("01") ? "on" : "off"
-		} else {
-			def reportValue = description.split(",").find {it.split(":")[0].trim() == "value"}?.split(":")[1].trim()
-			name = "power"
-			// assume 16 bit signed for encoding and power divisor is 10
-			value = Integer.parseInt(reportValue, 16) / 10
+	log.debug "description is $description"
+
+	def event = zigbee.getEvent(description)
+	if (event) {
+		log.info event
+		if (event.name == "power") {
+			if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
+				event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
+				sendEvent(event)
+			}
+		}
+		else {
+			sendEvent(event)
 		}
-	} else if (description?.startsWith("on/off:")) {
-		log.debug "Switch command"
-		name = "switch"
-		value = description?.endsWith(" 1") ? "on" : "off"
 	}
-
-	def result = createEvent(name: name, value: value)
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
-// Commands to device
-def on() {
-	[
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
-}
-
 def off() {
-	[
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
 }
 
 def setLevel(value) {
-	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	def cmd = "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 2000}"
-	log.debug cmd
-	cmd
-}
-
-def meter() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+	zigbee.setLevel(value)
 }
 
 def refresh() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}"
-	]
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
+	log.debug "Configuring Reporting and Bindings."
+	refresh()
 }

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -0,0 +1,45 @@
+# Z-wave Dimmer Switch
+
+
+
+Works with:
+
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
+* **Actuator** - represents that a Device has commands
+* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Check-in interval = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
@@ -82,6 +83,8 @@ metadata {
 }
 
 def updated(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -215,6 +218,13 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -23,6 +23,7 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -38,6 +39,7 @@ metadata {
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
 		attribute "deviceTemperatureUnit", "string"
+		attribute "deviceAlive", "enum", ["true", "false"]
 	}
 
 	tiles {
@@ -120,6 +122,21 @@ metadata {
 
 }
 
+void installed() {
+    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
+    // Using 12 minutes because in testing, device health team found that there could be "jitter"
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
+}
+
+// Device Watch will ping the device to proactively determine if the device has gone offline
+// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
+def ping() {
+    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
+    if (isAlive) {
+        refresh()
+    }
+}
+
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -148,14 +165,12 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -166,7 +181,11 @@ def generateEvent(Map results) {
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-			}  else {
+			} else if (name == "deviceAlive") {
+				isChange = isStateChange(device, name, value.toString())
+				event['isStateChange'] = isChange
+				event['displayed'] = false
+			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
@@ -253,7 +272,6 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -283,7 +301,6 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
-
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -354,7 +371,6 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -520,63 +536,56 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
-
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
-
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C")
-	{
-		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = roundC(minHeatingSetpoint)
-		minCoolingSetpoint = roundC(minCoolingSetpoint)
-		heatingSetpoint = roundC(heatingSetpoint)
-		coolingSetpoint = roundC(coolingSetpoint)
+	if(location.temperatureScale == "C") {
+		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
+		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
+		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
+		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
+	} else {
+		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
+		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
+		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
+		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
+		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
+		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
 	}
 
+	log.debug "Current Mode = ${mode}"
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-
+	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	if (mode == "heat") {
-
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-
 	}
 	else if (mode == "cool") {
-
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
-
 	} else if (mode == "auto") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
-
 	} else if (mode == "off") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
-
 	} else if (mode == "auxHeatOnly") {
-
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-
 	}
-
 }
 
 void raiseSetpoint() {
@@ -585,21 +594,31 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
+
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
+
+		if (location.temperatureScale == "C") {
+			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
+		} else {
+			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
+		}
+
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
-		} else {
-			targetvalue = 0
-		}
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -622,20 +641,29 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+
+		if (location.temperatureScale == "C") {
+			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
 		} else {
-			targetvalue = 0
+			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
 		}
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -653,7 +681,6 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
-
 	def mode = device.currentValue("thermostatMode")
 
 	if (mode == "off" || mode == "auto") {
@@ -666,6 +693,18 @@ void alterSetpoint(temp) {
 		def targetHeatingSetpoint
 		def targetCoolingSetpoint
 
+		def temperatureScaleHasChanged = false
+
+		if (location.temperatureScale == "C") {
+			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
+		} else {
+			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
+		}
+
 		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
 			if (temp.value > coolingSetpoint){
@@ -707,17 +746,18 @@ void alterSetpoint(temp) {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
 			}
 		}
+
+		if ( temperatureScaleHasChanged )
+			generateSetpointEvent()
 		generateStatusEvent()
 	}
 }
 
 def generateStatusEvent() {
-
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
-
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -727,36 +767,25 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "cool") {
-
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "auto") {
-
 		statusText = "Right Now: Auto"
-
 	} else if (mode == "off") {
-
 		statusText = "Right Now: Off"
-
 	} else if (mode == "auxHeatOnly") {
-
 		statusText = "Emergency Heat"
-
 	} else {
-
 		statusText = "?"
-
 	}
+
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -770,7 +799,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -28,17 +28,6 @@ metadata {
 
 	}
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -50,18 +39,15 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
 		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
-			state "power", label:'${currentValue} W'
-		}
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		main "switch"
-		details(["switch", "level", "power","levelSliderControl","refresh"])
+		details(["switch", "refresh"])
 	}
 }
 
@@ -69,283 +55,42 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
-
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
+	def event = zigbee.getEvent(description)
+	if (event) {
+		log.info event
+		if (event.name == "power") {
+			if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
+				event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
+				sendEvent(event)
+			}
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+			sendEvent(event)
 		}
 	}
 	else {
 		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug parseDescriptionAsMap(description)
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
-// Commands to device
-def zigbeeCommand(cluster, attribute){
-	["st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"]
-}
-
 def off() {
-	zigbeeCommand("6", "0")
+	zigbee.off()
 }
 
 def on() {
-	zigbeeCommand("6", "1")
+	zigbee.on()
 }
 
 def setLevel(value) {
-	value = value as Integer
-	if (value == 0) {
-		off()
-	}
-	else {
-		sendEvent(name: "level", value: value)
-		setLevelWithRate(value, "0000") + ["delay 1000"] + on()	//value is between 0 to 100; GE does NOT switch on if OFF
-	}
+	zigbee.setLevel(value)
 }
 
 def refresh() {
-	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
-	]
-
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-	onOffConfig() + levelConfig() + powerConfig() + refresh()
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-	byte tmp;
-	tmp = array[1];
-	array[1] = array[0];
-	array[0] = tmp;
-	return array
-}
-
-def parseDescriptionAsMap(description) {
-	if (description?.startsWith("read attr -")) {
-		(description - "read attr - ").split(",").inject([:]) { map, param ->
-			def nameAndValue = param.split(":")
-			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
-		}
-	}
-	else if (description?.startsWith("catchall: ")) {
-		def seg = (description - "catchall: ").split(" ")
-		def zigbeeMap = [:]
-		zigbeeMap += [raw: (description - "catchall: ")]
-		zigbeeMap += [profileId: seg[0]]
-		zigbeeMap += [clusterId: seg[1]]
-		zigbeeMap += [sourceEndpoint: seg[2]]
-		zigbeeMap += [destinationEndpoint: seg[3]]
-		zigbeeMap += [options: seg[4]]
-		zigbeeMap += [messageType: seg[5]]
-		zigbeeMap += [dni: seg[6]]
-		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
-		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
-		zigbeeMap += [manufacturerId: seg[9]]
-		zigbeeMap += [command: seg[10]]
-		zigbeeMap += [direction: seg[11]]
-		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
-			it.join('')
-		} : []]
-
-		zigbeeMap
-	}
-}
-
-def isKnownDescription(description) {
-	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-		def descMap = parseDescriptionAsMap(description)
-		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
-			isDescriptionOnOff(descMap)
-		}
-		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
-			isDescriptionLevel(descMap)
-		}
-		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
-			isDescriptionPower(descMap)
-		}
-		else {
-			return "false"
-		}
-	}
-	else if(description?.startsWith("on/off:")) {
-		def switchValue = description?.endsWith("1") ? "on" : "off"
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionOnOff(descMap) {
-	def switchValue = "undefined"
-	if (descMap.cluster == "0006") {				//cluster info from read attr
-		value = descMap.value
-		if (value == "01"){
-			switchValue = "on"
-		}
-		else if (value == "00"){
-			switchValue = "off"
-		}
-	}
-	else if (descMap.clusterId == "0006") {
-		//cluster info from catch all
-		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
-		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
-		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
-			switchValue = "on"
-		}
-		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
-			switchValue = "off"
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "switch (0006) capability configured successfully"]
-		}
-	}
-
-	if (switchValue != "undefined"){
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-
-}
-
-//@return - false or "success" or level [0-100]
-def isDescriptionLevel(descMap) {
-	def dimmerValue = -1
-	if (descMap.cluster == "0008"){
-		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
-		def value = convertHexToInt(descMap.value)
-		dimmerValue = Math.round(value * 100 / 255)
-		if(dimmerValue==0 && value > 0) {
-			dimmerValue = 1						//handling for non-zero hex value less than 3
-		}
-	}
-	else if(descMap.clusterId == "0008") {
-		if(descMap.command=="0B"){
-			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "level (0008) capability configured successfully"]
-		}
-	}
-
-	if (dimmerValue != -1){
-		return	[type: "level", value : dimmerValue]
-
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionPower(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0702") {
-		if (descMap.attrId == "0400") {
-			powerValue = convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0702") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0702) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-
-def onOffConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 8 0 0x20 1 3600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 05
-def powerConfig() {
-	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-def setLevelWithRate(level, rate) {
-	if(rate == null){
-		rate = "0000"
-	}
-	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	["st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"]
-}
-
-String convertToHexString(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
+	log.debug "Configuring Reporting and Bindings."
+	refresh()
 }

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -28,17 +28,6 @@ metadata {
 
 	}
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -47,238 +36,51 @@ metadata {
 				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "power", label:'${currentValue} Watts'
-		}
 		main "switch"
-		details(["switch", "power", "refresh"])
+		details(["switch", "refresh"])
 	}
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
 	log.debug "description is $description"
-
-	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
+	def event = zigbee.getEvent(description)
+	if (event) {
+		if (event.name == "power") {
+			def powerValue
+			powerValue = (event.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
 			sendEvent(name: "power", value: powerValue)
-
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+			sendEvent(event)
 		}
 	}
 	else {
 		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug parseDescriptionAsMap(description)
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
-// Commands to device
-def zigbeeCommand(cluster, attribute){
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
-}
-
 def off() {
-	zigbeeCommand("6", "0")
+	zigbee.off()
 }
 
 def on() {
-	zigbeeCommand("6", "1")
+	zigbee.on()
 }
 
 def refresh() {
-	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
-	]
-
+	zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-	onOffConfig() + powerConfig() + refresh()
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-	byte tmp;
-	tmp = array[1];
-	array[1] = array[0];
-	array[0] = tmp;
-	return array
-}
-
-def parseDescriptionAsMap(description) {
-	if (description?.startsWith("read attr -")) {
-		(description - "read attr - ").split(",").inject([:]) { map, param ->
-			def nameAndValue = param.split(":")
-			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
-		}
-	}
-	else if (description?.startsWith("catchall: ")) {
-		def seg = (description - "catchall: ").split(" ")
-		def zigbeeMap = [:]
-		zigbeeMap += [raw: (description - "catchall: ")]
-		zigbeeMap += [profileId: seg[0]]
-		zigbeeMap += [clusterId: seg[1]]
-		zigbeeMap += [sourceEndpoint: seg[2]]
-		zigbeeMap += [destinationEndpoint: seg[3]]
-		zigbeeMap += [options: seg[4]]
-		zigbeeMap += [messageType: seg[5]]
-		zigbeeMap += [dni: seg[6]]
-		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
-		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
-		zigbeeMap += [manufacturerId: seg[9]]
-		zigbeeMap += [command: seg[10]]
-		zigbeeMap += [direction: seg[11]]
-		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
-			it.join('')
-		} : []]
-
-		zigbeeMap
-	}
-}
-
-def isKnownDescription(description) {
-	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-		def descMap = parseDescriptionAsMap(description)
-		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
-			isDescriptionOnOff(descMap)
-		}
-		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
-			isDescriptionPower(descMap)
-		}
-		else {
-			return "false"
-		}
-	}
-	else if(description?.startsWith("on/off:")) {
-		def switchValue = description?.endsWith("1") ? "on" : "off"
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionOnOff(descMap) {
-	def switchValue = "undefined"
-	if (descMap.cluster == "0006") {				//cluster info from read attr
-		value = descMap.value
-		if (value == "01"){
-			switchValue = "on"
-		}
-		else if (value == "00"){
-			switchValue = "off"
-		}
-	}
-	else if (descMap.clusterId == "0006") {
-		//cluster info from catch all
-		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
-		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
-		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
-			switchValue = "on"
-		}
-		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
-			switchValue = "off"
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "switch (0006) capability configured successfully"]
-		}
-	}
-
-	if (switchValue != "undefined"){
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-
-}
-
-def isDescriptionPower(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0702") {
-		if (descMap.attrId == "0400") {
-			powerValue = convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0702") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0702) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-
-def onOffConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 05
-def powerConfig() {
-	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-String convertToHexString(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
+	log.debug "Configuring Reporting and Bindings."
+	refresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -172,6 +172,3 @@ def verifyPercent(percent) {
     }
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -87,6 +87,3 @@ def parse(description) {
 	results
 }
 
-def ping() {
-	log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -188,6 +188,3 @@ def verifyPercent(percent) {
     }
 }
 
-def ping() {
-    log.trace "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -93,6 +93,3 @@ void refresh() {
 	parent.manualRefresh()
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -107,6 +107,3 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,9 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -23,7 +23,6 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -64,12 +63,8 @@ metadata {
 	}
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -141,7 +136,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -193,14 +187,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+ 		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -209,19 +206,20 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
+	sendEvent(name: "model", value: data.product.name)
 
-	return []
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 }
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,9 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -22,13 +22,12 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
 			}
+
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -53,15 +52,10 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
-
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -71,7 +65,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -123,14 +116,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -138,16 +134,17 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	return []
-}
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
+	}
 }
 
 def selector() {

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -23,359 +23,123 @@ metadata {
         command "setAdjustedColor"
     }
 
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
     // UI tile definitions
-    tiles {
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-            state "color", action:"setAdjustedColor"
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-            state "colorName", label: '${currentValue}'
-        }
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-            state "level", label: 'Level ${currentValue}%'
-        }
-
         main(["switch"])
-        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "rgbSelector"])
+        details(["switch", "refresh"])
     }
 }
 
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-    //log.info "description is $description"
-    if (description?.startsWith("catchall:")) {
-        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-            def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            if(!(description?.startsWith("catchall: 0104 0300"))){
-                def result = createEvent(name: "switch", value: "off")
-                log.debug "Parse returned ${result?.descriptionText}"
-                return result
-            }
-        }
-    }
-    else if (description?.startsWith("read attr -")) {
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
+    log.debug "description is $description"
 
-        if (descMap.cluster == "0300") {
-            if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Hue value returned is $hueValue"
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(descMap.attrId == "0001"){ //Saturation Attribute
-                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Saturation from refresh is $saturationValue"
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else if(descMap.cluster == "0008"){
-            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-            log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.debug event
+        if (event.name=="level" && event.value==0) {}
+        else {
+            sendEvent(event)
         }
     }
     else {
-        def name = description?.startsWith("on/off: ") ? "switch" : null
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        def result = createEvent(name: name, value: value)
-        log.debug "Parse returned ${result?.descriptionText}"
-        return result
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+            }
+        }
+        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00){
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+            log.debug zigbeeMap
+        }
     }
-
-
 }
 
 def on() {
-    log.debug "on()"
-    sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def zigbeeOff() {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    zigbee.on()
 }
 
 def off() {
-    log.debug "off()"
-    sendEvent(name: "switch", value: "off")
-    zigbeeOff()
+    zigbee.off()
+}
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
-    [
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1"
-    ]
-
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
-    state.levelValue = 100
     log.debug "Configuring Reporting and Bindings."
-    def configCmds = [
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-            //Switch Reporting
-            "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-
-            //Level Control Reporting
-            "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-    ]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def poll(){
-    log.debug "Poll is calling refresh"
-    refresh()
-}
-
-def zigbeeSetLevel(level) {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
-	state.levelValue = (value==null) ? 100 : value
-    log.trace "setLevel($value)"
-    def cmds = []
-
-    if (value == 0) {
-        sendEvent(name: "switch", value: "off")
-        cmds << zigbeeOff()
-    }
-    else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-    }
-
-    sendEvent(name: "level", value: state.levelValue)
-    def level = hex(state.levelValue * 255 / 100)
-    cmds << zigbeeSetLevel(level)
-
-    //log.debug cmds
-    cmds
-}
-
-//input Hue Integer values; returns color name for saturation 100%
-private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
-        return
-
-    hueValue = Math.round(hueValue / 100 * 360)
-
-    log.debug "hue value is $hueValue"
-
-    def colorName = "Color Mode"
-    if(hueValue>=0 && hueValue <= 4){
-        colorName = "Red"
-    }
-    else if (hueValue>=5 && hueValue <=21 ){
-        colorName = "Brick Red"
-    }
-    else if (hueValue>=22 && hueValue <=30 ){
-        colorName = "Safety Orange"
-    }
-    else if (hueValue>=31 && hueValue <=40 ){
-        colorName = "Dark Orange"
-    }
-    else if (hueValue>=41 && hueValue <=49 ){
-        colorName = "Amber"
-    }
-    else if (hueValue>=50 && hueValue <=56 ){
-        colorName = "Gold"
-    }
-    else if (hueValue>=57 && hueValue <=65 ){
-        colorName = "Yellow"
-    }
-    else if (hueValue>=66 && hueValue <=83 ){
-        colorName = "Electric Lime"
-    }
-    else if (hueValue>=84 && hueValue <=93 ){
-        colorName = "Lawn Green"
-    }
-    else if (hueValue>=94 && hueValue <=112 ){
-        colorName = "Bright Green"
-    }
-    else if (hueValue>=113 && hueValue <=135 ){
-        colorName = "Lime"
-    }
-    else if (hueValue>=136 && hueValue <=166 ){
-        colorName = "Spring Green"
-    }
-    else if (hueValue>=167 && hueValue <=171 ){
-        colorName = "Turquoise"
-    }
-    else if (hueValue>=172 && hueValue <=187 ){
-        colorName = "Aqua"
-    }
-    else if (hueValue>=188 && hueValue <=203 ){
-        colorName = "Sky Blue"
-    }
-    else if (hueValue>=204 && hueValue <=217 ){
-        colorName = "Dodger Blue"
-    }
-    else if (hueValue>=218 && hueValue <=223 ){
-        colorName = "Navy Blue"
-    }
-    else if (hueValue>=224 && hueValue <=251 ){
-        colorName = "Blue"
-    }
-    else if (hueValue>=252 && hueValue <=256 ){
-        colorName = "Han Purple"
-    }
-    else if (hueValue>=257 && hueValue <=274 ){
-        colorName = "Electric Indigo"
-    }
-    else if (hueValue>=275 && hueValue <=289 ){
-        colorName = "Electric Purple"
-    }
-    else if (hueValue>=290 && hueValue <=300 ){
-        colorName = "Orchid Purple"
-    }
-    else if (hueValue>=301 && hueValue <=315 ){
-        colorName = "Magenta"
-    }
-    else if (hueValue>=316 && hueValue <=326 ){
-        colorName = "Hot Pink"
-    }
-    else if (hueValue>=327 && hueValue <=335 ){
-        colorName = "Deep Pink"
-    }
-    else if (hueValue>=336 && hueValue <=339 ){
-        colorName = "Raspberry"
-    }
-    else if (hueValue>=340 && hueValue <=352 ){
-        colorName = "Crimson"
-    }
-    else if (hueValue>=353 && hueValue <=360 ){
-        colorName = "Red"
-    }
-
-    colorName
-}
-
-private getEndpointId() {
-    new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}
-
-private evenHex(value){
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() % 2 != 0) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}
-
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
+    zigbee.setLevel(value)
 }
 
 def setColor(value){
     log.trace "setColor($value)"
-    def max = 0xfe
-
-    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
-
-    def colorName = getColorName(value.hue)
-    sendEvent(name: "colorName", value: colorName)
-
-    log.debug "color name is : $colorName"
-    sendEvent(name: "hue", value: value.hue, displayed:false)
-    sendEvent(name: "saturation", value: value.saturation, displayed:false)
-    def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
-    def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
-
-    def cmd = []
-    if (value.switch != "off" && device.latestValue("switch") == "off") {
-        cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-        cmd << "delay 150"
-    }
-
-    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
-    cmd << "delay 150"
-    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
-    
-    if (value.level) {
-        state.levelValue = value.level
-        sendEvent(name: "level", value: value.level)
-        def level = hex(value.level * 255 / 100)
-        cmd << zigbeeSetLevel(level)
-    }
-    
-    if (value.switch == "off") {
-        cmd << "delay 150"
-        cmd << off()
-    }
-
-    cmd
+    zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -29,431 +29,155 @@ metadata {
 
     }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
-			state "colorTemperature", action:"color temperature.setColorTemperature"
-		}
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
-			state "colorTemperature", label: '${currentValue} K'
-		}
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-			state "colorName", label: '${currentValue}'
-		}
-
-        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setAdjustedColor"
-		}
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-
-
-		main(["switch"])
-		details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp", "rgbSelector"])
-	}
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+    }
 }
 
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-	//log.info "description is $description"
-	if (description?.startsWith("catchall:")) {
-		if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            if(!(description?.startsWith("catchall: 0104 0300"))){
-                def result = createEvent(name: "switch", value: "off")
-                log.debug "Parse returned ${result?.descriptionText}"
-                return result
-            }
-        }
+    log.debug "description is $description"
 
-	}
-    else if (description?.startsWith("read attr -")) {	//for values returned after hitting refresh
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            if(descMap.attrId == "0007"){
-                log.debug "in read attr"
-                log.debug descMap.value
-                def tempInMired = convertHexToInt(descMap.value)
-                def tempInKelvin = Math.round(1000000/tempInMired)
-                log.trace "temp in kelvin: $tempInKelvin"
-                sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.debug event
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
             }
-            else if(descMap.attrId == "0008"){  //Color mode attribute
-                if(descMap.value == "00"){
-                    state.colorType = "rgb"
-                }else if(descMap.value == "02"){
-                    state.colorType = "white"
-                }
-            }
-            else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Hue value returned is $hueValue"
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(descMap.attrId == "0001"){ //Saturation Attribute
-                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Saturation from refresh is $saturationValue"
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else if(descMap.cluster == "0008"){
-        	def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-        	log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
+            sendEvent(event)
         }
     }
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-        log.debug "description is $description"
-		return result
-	}
-
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
 
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+            }
+        }
+        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00){
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+            log.debug zigbeeMap
+        }
+    }
 }
 
 def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def zigbeeOff() {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    zigbee.on()
 }
 
 def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	zigbeeOff()
+    zigbee.off()
+}
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
-    [
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 8"
-    ]
-
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
-    state.levelValue = 100
-    state.colorType = "white"
-	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
+    log.debug "Configuring Reporting and Bindings."
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    refresh()
 }
 
 def setColorTemperature(value) {
-    state?.colorType = "white"
-	if(value<101){
-    	value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
-    }
-
-    def tempInMired = Math.round(1000000/value)
-    def finalHex = swapEndianHex(hex(tempInMired, 4))
-    def genericName = getGenericName(value)
-    log.debug "generic name is : $genericName"
-
-    def cmds = []
-    sendEvent(name: "colorTemperature", value: value, displayed:false)
-    sendEvent(name: "colorName", value: genericName)
-
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
-
-    cmds
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def poll(){
-	log.debug "Poll is calling refresh"
-	refresh()
-}
-
-def zigbeeSetLevel(level) {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-}
-
-def setLevel(value) {
-	state.levelValue = (value==null) ? 100 : value
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << zigbeeOff()
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: state.levelValue)
-	def level = hex(state.levelValue * 255 / 100)
-	cmds << zigbeeSetLevel(level)
-
-	//log.debug cmds
-	cmds
+    setGenericName(value)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-private getGenericName(value){
-    def genericName = "White"
-    if(state?.colorType == "rgb"){
-        genericName = "Color Mode"
-    }
-	else{
-        if(value < 3300){
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
             genericName = "Soft White"
-        } else if(value < 4150){
+        } else if (value < 4150) {
             genericName = "Moonlight"
-        } else if(value < 5000){
+        } else if (value <= 5000) {
             genericName = "Cool White"
-        } else if(value <= 6500){
+        } else if (value >= 5000) {
             genericName = "Daylight"
         }
+        sendEvent(name: "colorName", value: genericName)
     }
-
-    genericName
 }
 
-//input Hue Integer values; returns color name for saturation 100%
-private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
-        return
-
-    hueValue = Math.round(hueValue / 100 * 360)
-
-    log.debug "hue value is $hueValue"
-
-    def colorName = "Color Mode"
-    if(hueValue>=0 && hueValue <= 4){
-        colorName = "Red"
-    }
-    else if (hueValue>=5 && hueValue <=21 ){
-        colorName = "Brick Red"
-    }
-    else if (hueValue>=22 && hueValue <=30 ){
-        colorName = "Safety Orange"
-    }
-    else if (hueValue>=31 && hueValue <=40 ){
-        colorName = "Dark Orange"
-    }
-    else if (hueValue>=41 && hueValue <=49 ){
-        colorName = "Amber"
-    }
-    else if (hueValue>=50 && hueValue <=56 ){
-        colorName = "Gold"
-    }
-    else if (hueValue>=57 && hueValue <=65 ){
-        colorName = "Yellow"
-    }
-    else if (hueValue>=66 && hueValue <=83 ){
-        colorName = "Electric Lime"
-    }
-    else if (hueValue>=84 && hueValue <=93 ){
-        colorName = "Lawn Green"
-    }
-    else if (hueValue>=94 && hueValue <=112 ){
-        colorName = "Bright Green"
-    }
-    else if (hueValue>=113 && hueValue <=135 ){
-        colorName = "Lime"
-    }
-    else if (hueValue>=136 && hueValue <=166 ){
-        colorName = "Spring Green"
-    }
-    else if (hueValue>=167 && hueValue <=171 ){
-        colorName = "Turquoise"
-    }
-    else if (hueValue>=172 && hueValue <=187 ){
-        colorName = "Aqua"
-    }
-    else if (hueValue>=188 && hueValue <=203 ){
-        colorName = "Sky Blue"
-    }
-    else if (hueValue>=204 && hueValue <=217 ){
-        colorName = "Dodger Blue"
-    }
-    else if (hueValue>=218 && hueValue <=223 ){
-        colorName = "Navy Blue"
-    }
-    else if (hueValue>=224 && hueValue <=251 ){
-        colorName = "Blue"
-    }
-    else if (hueValue>=252 && hueValue <=256 ){
-        colorName = "Han Purple"
-    }
-    else if (hueValue>=257 && hueValue <=274 ){
-        colorName = "Electric Indigo"
-    }
-    else if (hueValue>=275 && hueValue <=289 ){
-        colorName = "Electric Purple"
-    }
-    else if (hueValue>=290 && hueValue <=300 ){
-        colorName = "Orchid Purple"
-    }
-    else if (hueValue>=301 && hueValue <=315 ){
-        colorName = "Magenta"
-    }
-    else if (hueValue>=316 && hueValue <=326 ){
-        colorName = "Hot Pink"
-    }
-    else if (hueValue>=327 && hueValue <=335 ){
-        colorName = "Deep Pink"
-    }
-    else if (hueValue>=336 && hueValue <=339 ){
-        colorName = "Raspberry"
-    }
-    else if (hueValue>=340 && hueValue <=352 ){
-        colorName = "Crimson"
-    }
-    else if (hueValue>=353 && hueValue <=360 ){
-        colorName = "Red"
-    }
-
-    colorName
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private evenHex(value){
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() % 2 != 0) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}
-
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
+def setLevel(value) {
+    zigbee.setLevel(value)
 }
 
 def setColor(value){
-    state?.colorType = "rgb"
-	log.trace "setColor($value)"
-	def max = 0xfe
-
-    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
-
-    def colorName = getColorName(value.hue)
-    log.debug "color name is : $colorName"
-    sendEvent(name: "colorName", value: colorName)
-    sendEvent(name: "colorTemperature", value: "--", displayed:false)
-
-
-    sendEvent(name: "hue", value: value.hue, displayed:false)
-	sendEvent(name: "saturation", value: value.saturation, displayed:false)
-	def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
-	def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
-
-	def cmd = []
-	if (value.switch != "off" && device.latestValue("switch") == "off") {
-		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-		cmd << "delay 150"
-	}
-
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
-	cmd << "delay 150"
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
-
-    if (value.level) {
-        state.levelValue = value.level
-        sendEvent(name: "level", value: value.level)
-        def level = hex(value.level * 255 / 100)
-        cmd << zigbeeSetLevel(level)
-    }
-
-	if (value.switch == "off") {
-		cmd << "delay 150"
-		cmd << off()
-	}
-
-	cmd
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
 }
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -21,232 +21,119 @@ metadata {
         attribute "colorName", "string"
     }
 
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
     // UI tile definitions
-    tiles {
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorName", label: '${currentValue}'
         }
 
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-            state "level", label: 'Level ${currentValue}%'
-        }
-
-
         main(["switch"])
-        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-    //log.trace description
-
-    if (description?.startsWith("catchall:")) {
-        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-            def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            def result = createEvent(name: "switch", value: "off")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-
-    }
-    else if (description?.startsWith("read attr -")) {
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            log.debug descMap.value
-            def tempInMired = convertHexToInt(descMap.value)
-            def tempInKelvin = Math.round(1000000/tempInMired)
-            log.trace "temp in kelvin: $tempInKelvin"
-            sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
-        }
-        else if(descMap.cluster == "0008"){
-            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-            log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
         }
     }
     else {
-        def name = description?.startsWith("on/off: ") ? "switch" : null
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        def result = createEvent(name: name, value: value)
-        log.debug "Parse returned ${result?.descriptionText}"
-        return result
-    }
-}
+        def cluster = zigbee.parse(description)
 
-def on() {
-    log.debug "on()"
-    sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug "${cluster}"
+        }
+    }
 }
 
 def off() {
-    log.debug "off()"
-    sendEvent(name: "switch", value: "off")
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    zigbee.off()
 }
 
-def refresh() {
-    [
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7"
-    ]
-
-}
-
-def configure() {
-    state.levelValue = 100
-    log.debug "Configuring Reporting and Bindings."
-    def configCmds = [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-    ]
-    return onOffConfig() + levelConfig() + configCmds + refresh() // send refresh cmds as part of config
-}
-
-def onOffConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 6 0 0x10 0 300 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-def setColorTemperature(value) {
-    if(value<101){
-        value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
-    }
-
-    def tempInMired = Math.round(1000000/value)
-    def finalHex = swapEndianHex(hex(tempInMired, 4))
-    def genericName = getGenericName(value)
-    log.debug "generic name is : $genericName"
-
-    def cmds = []
-    sendEvent(name: "colorTemperature", value: value, displayed:false)
-    sendEvent(name: "colorName", value: genericName)
-
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
-
-    cmds
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
+def on() {
+    zigbee.on()
 }
 
 def setLevel(value) {
-    state.levelValue = (value==null) ? 100 : value
-    log.trace "setLevel($value)"
-    def cmds = []
+    zigbee.setLevel(value)
+}
 
-    if (value == 0) {
-        sendEvent(name: "switch", value: "off")
-        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-    }
-    else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-    }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
 
-    sendEvent(name: "level", value: state.levelValue)
-    def level = hex(state.levelValue * 254 / 100)
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
 
-    //log.debug cmds
-    cmds
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    refresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-private getGenericName(value){
-    def genericName = "White"
-    if(value < 3300){
-        genericName = "Soft White"
-    } else if(value < 4150){
-        genericName = "Moonlight"
-    } else if(value < 5000){
-        genericName = "Cool White"
-    } else if(value <= 6500){
-        genericName = "Daylight"
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
     }
-
-    genericName
-}
-
-private getEndpointId() {
-    new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -143,7 +143,7 @@ def refresh() {
 def configure() {
 	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -202,48 +202,37 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
+
 	}
 
 	return result

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -220,48 +220,35 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
 	}
 

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -30,14 +30,18 @@ metadata {
 
 	}
 
-	simulator {
-		status "active": "zone report :: type: 19 value: 0031"
-		status "inactive": "zone report :: type: 19 value: 0030"
-	}
-
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+			])
+		}
+		section {
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
 	}
 
 	tiles(scale: 2) {
@@ -49,15 +53,15 @@ metadata {
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
@@ -85,55 +89,71 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
 
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
 
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
 
 			case 0x0406:
-            	log.debug 'motion'
-                resultMap.name = 'motion'
-                break
-        }
-    }
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					log.debug 'motion'
+					resultMap.name = 'motion'
+				}
+				break
+		}
+	}
 
-    return resultMap
+	return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+			cluster.command == 0x0B ||
+			(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -151,10 +171,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-    	resultMap = getMotionResult(value)
-    }
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
 
 	return resultMap
 }
@@ -170,15 +190,17 @@ private Map parseCustomMessage(String description) {
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -186,31 +208,21 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-	log.debug rawValue
-
-	def result = [
-		name: 'battery',
-		value: '--'
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
-	def descriptionText
 
-    if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-		}
-		else if (volts > 0){
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
-		}
+	if (!(rawValue == 0 || rawValue == 255)) {
+		def minVolts = 2.1
+		def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		def roundedPct = Math.round(pct * 100)
+		if (roundedPct <= 0)
+			roundedPct = 1
+		result.name = 'battery'
+		result.value = Math.min(100, roundedPct)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+
 	}
 
 	return result
@@ -218,68 +230,75 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	def descriptionText
+	if ( temperatureScale == 'C' )
+		descriptionText = '{{ device.displayName }} was {{ value }}°C'
+	else
+		descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			translatable: true,
+			unit: temperatureScale
 	]
 }
 
 private Map getMotionResult(value) {
 	log.debug 'motion'
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
-		name: 'motion',
-		value: value,
-		descriptionText: descriptionText
+			name: 'motion',
+			value: value,
+			descriptionText: descriptionText,
+			translatable: true
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+			"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+			"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-    return refresh() + configCmds  // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-    ]
+			//Resending the CIE in case the enroll request is sent before CIE is written
+			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+			//Enroll Response
+			"raw 0x500 {01 23 00 00 00}",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
 }
 
 private getEndpointId() {
@@ -291,19 +310,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -281,47 +281,35 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
 	}
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -16,51 +16,68 @@
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
- metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
- 		capability "Battery"
- 		capability "Configuration"
- 		capability "Contact Sensor"
- 		capability "Acceleration Sensor"
- 		capability "Refresh"
- 		capability "Temperature Measurement"
+metadata {
+	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Contact Sensor"
+		capability "Acceleration Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
 		capability "Health Check"
 		capability "Sensor"
 
 		command "enrollResponse"
- 	}
+		attribute "status", "string"
+	}
 
- 	simulator {
-
- 	}
-
- 	preferences {
- 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
- 	}
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+			])
+		}
+		section {
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
+		section {
+			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+		}
+	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
-		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°',
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -69,98 +86,121 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main (["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "battery", "refresh"])
+
+		main(["status", "acceleration", "temperature"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
- }
-
- def parse(String description) {
- 	log.debug "description: $description"
-
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
- 	else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
-
- 	log.debug "Parse returned $map"
- 	def result = map ? createEvent(map) : null
-
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
-
- private Map parseCatchAllMessage(String description) {
- 	Map resultMap = [:]
- 	def cluster = zigbee.parse(description)
- 	if (shouldProcessMessage(cluster)) {
- 		switch(cluster.clusterId) {
- 			case 0x0001:
- 			resultMap = getBatteryResult(cluster.data.last())
- 			break
-
- 			case 0xFC02:
- 			break
-
- 			case 0x0402:
- 			log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-            }
-        }
-
-        return resultMap
-    }
-
-    private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-    cluster.command == 0x0B ||
-    cluster.command == 0x07 ||
-    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
 }
 
-private int getHumidity(value) {
-	return Math.round(Double.parseDouble(value))
+def parse(String description) {
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
+	def result = map ? createEvent(map) : null
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
+	return result
 }
 
-private Map parseReportAttributeMessage(String description) {
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
+
+			case 0xFC02:
+				log.debug 'ACCELERATION'
+				break
+
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if(cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+			cluster.command == 0x0B ||
+			(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private List parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-	log.debug "Desc Map: $descMap"
 
-	Map resultMap = [:]
+	List result = []
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
+		result << getTemperatureResult(value)
 	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0002") {
-		Integer.parseInt(descMap.value,8)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+		result << getAccelerationResult(descMap.value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return resultMap
+	return result
 }
 
 private Map parseCustomMessage(String description) {
@@ -174,141 +214,270 @@ private Map parseCustomMessage(String description) {
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+	if (garageSensor != "Yes"){
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+	}
+
+	return resultMap
+}
+
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
 }
 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
-		} else {
-			return celsiusToFahrenheit(celsius) as Integer
-		}
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+
+	def result = [:]
+
+	def volts = rawValue / 10
+
+	if (!(rawValue == 0 || rawValue == 255)) {
+		def minVolts = 2.1
+		def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		def roundedPct = Math.round(pct * 100)
+		if (roundedPct <= 0)
+			roundedPct = 1
+		result.name = 'battery'
+		result.value = Math.min(100, roundedPct)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+
 	}
 
-	private Map getBatteryResult(rawValue) {
-		log.debug 'Battery'
-		def linkText = getLinkText(device)
+	return result
+}
 
-		def result = [
-		name: 'battery'
-		]
-
-		def volts = rawValue / 10
-		def descriptionText
-        if (rawValue == 0 || rawValue == 255) {}
-		else if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-		}
-		else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-	        if (roundedPct <= 0)
-		        roundedPct = 1
-			result.value = Math.min(100, roundedPct)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
-		}
-
-		return result
+private Map getTemperatureResult(value) {
+	log.debug "Temperature"
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
 	}
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
 
-	private Map getTemperatureResult(value) {
-		log.debug 'TEMP'
-		def linkText = getLinkText(device)
-		if (tempOffset) {
-			def offset = tempOffset as int
-			def v = value as int
-			value = v + offset
-		}
-		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-		return [
+	return [
 			name: 'temperature',
 			value: value,
 			descriptionText: descriptionText,
+			translatable: true,
 			unit: temperatureScale
-		]
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug "Contact: ${device.displayName} value = ${value}"
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration"
+	def name = "acceleration"
+	def value
+	def descriptionText
+
+	if ( numValue.endsWith("1") ) {
+		value = "active"
+		descriptionText = '{{ device.displayName }} was active'
+	} else {
+		value = "inactive"
+		descriptionText = '{{ device.displayName }} was inactive'
 	}
 
-	private Map getContactResult(value) {
-		log.debug 'Contact Status'
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-		return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText
-		]
-	}
-
-	private getAccelerationResult(numValue) {
-		def name = "acceleration"
-		def value = numValue.endsWith("1") ? "active" : "inactive"
-		//def linkText = getLinkText(device)
-		def descriptionText = "$linkText was $value"
-		def isStateChange = isStateChange(device, name, value)
-		[
+	def isStateChange = isStateChange(device, name, value)
+	return [
 			name: name,
 			value: value,
-			//unit: null,
-			//linkText: linkText,
 			descriptionText: descriptionText,
-			//handlerName: value,
-			isStateChange: isStateChange
-		//	displayed: displayed(description, isStateChange)
-		]
+			isStateChange: isStateChange,
+			translatable: true
+	]
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
+def refresh() {
+	log.debug "Refreshing Values "
+
+	def refreshCmds = []
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		log.debug "Refreshing Values for manufacturer: SmartThings "
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+	} else {
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
-	def refresh() {
-		log.debug "Refreshing Temperature and Battery "
-		def refreshCmds = [
+	//Common refresh commands
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
-
-		]
-
-		return refreshCmds + enrollResponse()
-	}
+	return refreshCmds + enrollResponse()
+}
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	log.debug "Configuring Reporting"
 
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	def configCmds = zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300) +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-	return refresh() + configCmds // send refresh cmds as part of config
+	return refresh() + configCmds
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+			//Resending the CIE in case the enroll request is sent before CIE is written
+			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+			//Enroll Response
+			"raw 0x500 {01 23 00 00 00}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
+private Map parseAxis(String description) {
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
+	} else {
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
+		// This may change in the future
+		xyzResults.x = z
+		xyzResults.y = x
+		xyzResults.z = y
+	}
+
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		garageEvent(xyzResults.z)
+
+	getXyzResult(xyzResults, description)
+}
+
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+	}
+}
+
+private Map getXyzResult(results, description) {
+	def name = "threeAxis"
+	def value = "${results.x},${results.y},${results.z}"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+			name: name,
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: name,
+			isStateChange: isStateChange,
+			displayed: false
+	]
+}
+
+private getManufacturerCode() {
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		return "0x110A"
+	} else {
+		return "0x104E"
+	}
+}
+
+private hexToInt(value) {
+	new BigInteger(value, 16)
 }
 
 private hex(value) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -196,25 +196,19 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
 	def volts = rawValue / 10
-	def descriptionText
-    if (rawValue == 0 || rawValue == 255) {}
-    else if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 	    if (roundedPct <= 0)
 		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
 	}
 
 	return result

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -207,25 +207,20 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
 	def volts = rawValue / 10
-	def descriptionText
-    if (rawValue == 0 || rawValue == 255) {}
-    else if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
+		if (roundedPct <= 0)
+			roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
+
 	}
 
 	return result
@@ -264,7 +259,6 @@ def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +  // New firmware
 			zigbee.readAttribute(0x0402, 0x0000) +
 			zigbee.readAttribute(0x0001, 0x0020)
 }

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -181,22 +181,17 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
-	def volts = rawValue / 10
-	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
+		def volts = rawValue / 10
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
 	}
 
 	return result

devicetypes/smartthings/zigbee-dimmer-power.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -0,0 +1,41 @@
+# GE Plug-In/In-Wall Smart Dimmer (ZigBee)
+
+
+
+Works with:
+
+* [GE In-Wall Smart Dimmer (ZigBee)](https://shop.smartthings.com/#!/products/ge-in-wall-smart-dimmer-switch)
+* [GE Plug-In Smart Dimmer (ZigBee)](https://www.smartthings.com/works-with-smartthings/ge/ge-plug-in-smart-dimmer-zigbee)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Power Meter** - ability to check the power meter(energy consumption) of device
+* **Sensor** - represents the device sensor capability
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
+This gives the device twice the amount of time to respond before it is marked as offline.
+Enrolls with default periodic reporting until newer 5 min interval is confirmed
+It then enrolls the device with updated checkInterval i.e. 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [GE Z-Wave In-Wall Smart Dimmer (GE 45857) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204988564-GE-In-Wall-Smart-Dimmer-45857GE-ZigBee-)
+* [GE Zigbee Plug-in Smart Dimmer (GE 45852) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205239280-GE-Plug-In-Smart-Dimmer-45852GE-ZigBee-)

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -21,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -70,8 +71,20 @@ def parse(String description) {
         }
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00){
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug zigbee.parseDescriptionAsMap(description)
+        }
     }
 }
 
@@ -87,11 +100,22 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
+
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify LED On/Off/Dim
+# Zigbee Dimmer
 
 
 
 Works with: 
 
 * [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+* [WeMo LED Bulb](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
 
 ## Table of contents
 
@@ -23,14 +24,16 @@ Works with:
 
 ## Device Health
 
-A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Enrolls with default periodic reporting until newer 5 min interval is confirmed
+It then enrolls the device with updated checkInterval i.e. 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [OSRAM Lightify LED On/Off/Dim Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [WeMo LED Bulb Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -104,7 +104,7 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -47,197 +47,122 @@ metadata {
 		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
 	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"color control.setColor"
+			}
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemperature", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "colorTemperature", label: '${currentValue} K'
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setAdjustedColor"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "saturation", action:"color control.setSaturation"
-		}
-		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-			state "saturation", label: 'Sat ${currentValue}    '
-		}
-		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "hue", action:"color control.setHue"
-		}
 
 		main(["switch"])
-		details(["switch", "levelSliderControl", "rgbSelector", "refresh"])
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
 }
 
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-	//log.trace description
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		//log.trace msg
-		//log.trace "data: $msg.data"
+	log.debug "description is $description"
+
+	def finalResult = zigbee.getEvent(description)
+	if (finalResult) {
+		log.debug finalResult
+		sendEvent(finalResult)
 	}
 	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
+		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+		log.trace "zigbeeMap : $zigbeeMap"
+
+		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				sendEvent(name: "hue", value: hueValue, displayed:false)
+			}
+			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				sendEvent(name: "saturation", value: saturationValue, displayed:false)
+			}
+		}
+		else {
+			log.info "DID NOT PARSE MESSAGE for description : $description"
+		}
 	}
 }
 
 def on() {
-	// just assume it works for now
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
 }
 
 def off() {
-	// just assume it works for now
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
 }
 
-def setHue(value) {
-	def max = 0xfe
-	log.trace "setHue($value)"
-	sendEvent(name: "hue", value: value)
-	def scaledValue = Math.round(value * max / 100.0)
-	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledValue)} 00 0000}"
-	//log.info cmd
-	cmd
+def refresh() {
+	refreshAttributes() + configureAttributes()
 }
 
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.hue = adjustOutgoingHue(value.hue)
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
+def poll() {
+	refreshAttributes()
+}
+
+def configure() {
+	log.debug "Configuring Reporting and Bindings."
+	configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+	zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+def setLevel(value) {
+	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){
 	log.trace "setColor($value)"
-	def max = 0xfe
+	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
 
-	sendEvent(name: "hue", value: value.hue)
-	sendEvent(name: "saturation", value: value.saturation)
-	def scaledHueValue = Math.round(value.hue * max / 100.0)
-	def scaledSatValue = Math.round(value.saturation * max / 100.0)
-
-	def cmd = []
-	if (value.switch != "off" && device.latestValue("switch") == "off") {
-		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-		cmd << "delay 150"
-	}
-
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledHueValue)} 00 0000}"
-	cmd << "delay 150"
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledSatValue)} 0000}"
-
-	if (value.level != null) {
-		cmd << "delay 150"
-		cmd.addAll(setLevel(value.level))
-	}
-
-	if (value.switch == "off") {
-		cmd << "delay 150"
-		cmd << off()
-	}
-	log.info cmd
-	cmd
+def setHue(value) {
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-	def max = 0xfe
-	log.trace "setSaturation($value)"
-	sendEvent(name: "saturation", value: value)
-	def scaledValue = Math.round(value * max / 100.0)
-	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledValue)} 0000}"
-	//log.info cmd
-	cmd
-}
-
-def refresh() {
-	"st rattr 0x${device.deviceNetworkId} 1 6 0"
-}
-
-def poll(){
-	log.debug "Poll is calling refresh"
-	refresh()
-}
-
-def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-	//log.debug cmds
-	cmds
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -145,7 +145,7 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Power Meter"
         capability "Sensor"
         capability "Switch"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
@@ -77,10 +78,26 @@ def on() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    Integer reportIntervalMinutes = 5
+    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0,reportIntervalMinutes * 60) + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    refresh()
+    log.debug "in configure()"
+    configureHealthCheck()
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    refresh()
+    sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+    log.debug "in updated()"
+    configureHealthCheck()
+}
+
+def ping() {
+    return zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify Tunable 60 White
+# ZigBee White Color Temperature Bulb
 
 
 
 Works with: 
 
 * [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+* [OSRAM LIGHTIFY RT5/6 Tunable White](https://www.smartthings.com/works-with-smartthings/light-bulbs/osram-lightify-rt56-tunable-white)
 
 ## Table of contents
 
@@ -24,14 +25,16 @@ Works with:
 
 ## Device Health
 
-A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+Zigbee Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Enrolls with default periodic reporting until newer 5 min interval is confirmed
+It then enrolls the device with updated checkInterval i.e. 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM Lightify Tunable 60 White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM LIGHTIFY RT5/6 Tunable White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/214191863-How-to-connect-OSRAM-LIGHTIFY-Bulbs)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -33,7 +33,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
@@ -83,24 +83,105 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
+        Map bindingTable = parseBindingTableResponse(description)
+        if (bindingTable) {
+            List<String> cmds = []
+            bindingTable.table_entries.inject(cmds) { acc, entry ->
+                // The binding entry is not for our hub and should be deleted
+                if (entry["dstAddr"] != zigbeeEui) {
+                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
+                }
+                acc
+            }
+            // There are more entries that we haven't examined yet
+            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
+                def startPos
+                if (cmds) {
+                    log.warn "Removing binding entries for other devices: $cmds"
+                    // Since we are removing some entries, we should start in the same spot as we just read since values
+                    // will fill in the newly vacated spots
+                    startPos = bindingTable.startIndex
+                } else {
+                    // Since we aren't removing anything we move forward to the next set of table entries
+                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
+                }
+                cmds.addAll(requestBindingTable(startPos))
+            }
+            sendHubCommand(cmds.collect { it ->
+                new physicalgraph.device.HubAction(it)
+            }, 2000)
+        } else {
+            def cluster = zigbee.parse(description)
 
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+                if (cluster.data[0] == 0x00) {
+                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                }
+                else {
+                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                }
             }
             else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                log.warn "DID NOT PARSE MESSAGE for description : $description"
+                log.debug "${cluster}"
             }
         }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
     }
 }
 
+def parseBindingTableResponse(description) {
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap["clusterInt"] == 0x8033) {
+        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
+        def field_values = [:]
+        def data = descMap["data"]
+        header_field_lengths.each { k, v ->
+            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
+            data = data.drop(v);
+        }
+
+        List<Map> table = []
+        if (field_values.numEntriesReturned) {
+            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
+            for (def i : 0..(field_values.numEntriesReturned - 1)) {
+                def entryMap = [:]
+                table_entry_lengths.each { k, v ->
+                    def val = data.take(v).reverse().join("")
+                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
+                    data = data.drop(v)
+                }
+
+                switch (entryMap.dstAddrMode) {
+                    case 0x01:
+                        entryMap["dstAddr"] = data.take(2).reverse().join("")
+                        data = data.drop(2)
+                        break
+                    case 0x03:
+                        entryMap["dstAddr"] = data.take(8).reverse().join("")
+                        data = data.drop(8)
+                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
+                        data = data.drop(1)
+                        break
+                }
+                table << entryMap
+            }
+        }
+        field_values["table_entries"] = table
+        return field_values
+    }
+    return [:]
+}
+
+def requestBindingTable(startPos=0) {
+    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
+}
+
+def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
+    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
+}
+
+
 def off() {
     zigbee.off()
 }
@@ -128,10 +209,9 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    refresh() + requestBindingTable(0) + ["delay 2000"]
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -21,6 +24,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -96,7 +100,38 @@ def poll() {
     refresh()
 }
 
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = refresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
+def configure() {
+    log.debug "configure()"
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
 }

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -22,6 +25,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
@@ -96,9 +100,41 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
+    log.debug "configure()"
+    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -0,0 +1,41 @@
+# Z-wave Dimmer
+
+
+
+Works with: 
+
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
+* [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-wave) and Leviton Universal Dimmer (DZMX1-LZ) (Z-Wave) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -15,12 +15,15 @@ metadata {
 	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
+		capability "Health Check"
 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
+		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
+		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
 	}
 
 	simulator {
@@ -68,6 +71,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -185,6 +193,13 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []

devicetypes/smartthings/zwave-switch-generic.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -0,0 +1,43 @@
+# Z-wave Switch
+
+
+
+Works with: 
+
+* [Leviton Appliance Module (DZPA1-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-appliance-module)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://www.smartthings.com/works-with-smartthings/outlets/ge-plug-in-outdoor-smart-switch)
+* [Leviton Outlet (DZR15-1LZ)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-outlet)
+* [Leviton Switch (DZS15-1LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-switch)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Leviton Appliance Module (DZPA1-1LW), GE Plug-In Outdoor Smart Switch (GE 12720), Leviton Outlet (DZR15-1LZ) and Leviton Switch (DZS15-1LZ) (Z-Wave) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+* [Leviton Outlet (DZR15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Switch (DZS15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -14,12 +14,17 @@
 metadata {
 	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
+		capability "Health Check"
  		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
+		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
+		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
+		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 	}
 
 	// simulator metadata
@@ -50,6 +55,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -126,6 +136,13 @@ def poll() {
 	])
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-switch.src/README.md

@@ -0,0 +1,49 @@
+# Z-Wave Switch
+
+
+Works with: 
+
+* [GE Z-Wave Plug-In Smart Switch (12719)](http://products.z-wavealliance.org/products/1193)
+* [GE Z-Wave In-Wall Smart Outlet (12721)](http://products.z-wavealliance.org/products/1195)
+* [GE Z-Wave In-Wall Smart Switch (12722)](http://products.z-wavealliance.org/products/1196)
+* [GE Z-Wave In-Wall Smart Toggle Switch (12727)](http://products.z-wavealliance.org/products/1200)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Switches (Plug-In, In-Wall(Toggle Switch, Switch, Outlet)) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave Dimmer/Switch Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
+* [GE Z-Wave Plug-In Smart Switch (12719) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903070-GE-Plug-In-Smart-Switch-GE-12719-Z-Wave)
+* [GE Z-Wave In-Wall Smart Outlet (12721) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903020-GE-In-Wall-Smart-Outlet-GE-12721-Z-Wave)
+* [GE Z-Wave In-Wall Smart Switch (12722) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200902540-GE-In-Wall-Smart-Switch-GE-12722-Z-Wave)
+* [GE Z-Wave In-Wall Smart Toggle Switch (12727) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/207568933-GE-In-Wall-Smart-Toggle-Switch-GE-12727-Z-Wave)
+
+

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -19,6 +19,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
@@ -64,6 +65,8 @@ metadata {
 }
 
 def updated(){
+		// Device-Watch simply pings if no device events received for 32min(checkInterval)
+		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -156,6 +159,13 @@ def poll() {
 	])
 }
 
+/**
+  * PING is used by Device-Watch in attempt to reach the Device
+**/
+def ping() {
+		refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -387,18 +387,18 @@ def getDeviceList() {
 	state.deviceDetail = [:]
 	state.deviceState = [:]
 
-	apiGet("/api/getstationsdata") { response ->
+	apiGet("/api/devicelist") { response ->
 		response.data.body.devices.each { value ->
 			def key = value._id
 			deviceList[key] = "${value.station_name}: ${value.module_name}"
 			state.deviceDetail[key] = value
             state.deviceState[key] = value.dashboard_data
-			value.modules.each { value2 ->            
-                def key2 = value2._id
-                deviceList[key2] = "${value.station_name}: ${value2.module_name}"
-                state.deviceDetail[key2] = value2
-                state.deviceState[key2] = value2.dashboard_data            
-            }
+		}
+		response.data.body.modules.each { value ->
+			def key = value._id
+			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
+			state.deviceDetail[key] = value
+            state.deviceState[key] = value.dashboard_data
 		}
 	}
 

smartapps/namespace/name.src/name.groovy

@@ -0,0 +1,50 @@
+/**
+ *  name
+ *
+ *  Copyright 2016 João Borges
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "name",
+    namespace: "namespace",
+    author: "João Borges",
+    description: "description",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -842,6 +842,7 @@ private void storeThermostatData(thermostats) {
             minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
             maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
             autoMode: stat.settings.autoHeatCoolFeatureEnabled,
+            deviceAlive: stat.runtime.connected == true ? "true" : "false",
             auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
             temperature: (stat.runtime.actualTemperature / 10),
             heatingSetpoint: stat.runtime.desiredHeat / 10,

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -8,7 +8,7 @@
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
  *
- *      http://www.apache.org/licenses/LICENSE-2.0
+ *  http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+	singleInstance: true
 )
 
 preferences {
@@ -37,7 +37,10 @@ preferences {
 
 def mainPage() {
 	def bridges = bridgesDiscovered()
-	if (state.username && bridges) {
+
+	if (state.refreshUsernameNeeded) {
+		return bridgeLinking()
+	} else if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
@@ -102,13 +105,22 @@ def bridgeLinking() {
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-    def paragraphText
+	def paragraphText
 	if (selectedHue) {
-		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-    } else {
-    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-    }
+		if (state.refreshUsernameNeeded) {
+			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
+		} else {
+			paragraphText = "Press the button on your Hue Bridge to setup a link. "
+		}
+	} else {
+		paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+	}
 	if (state.username) { //if discovery worked
+		if (state.refreshUsernameNeeded) {
+			state.refreshUsernameNeeded = false
+			// Issue one poll with new username to cancel local polling with old username
+			poll()
+		}
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
@@ -186,7 +198,7 @@ void ssdpSubscribe() {
 
 private sendDeveloperReq() {
 	def token = app.id
-    def host = getBridgeIP()
+	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "POST",
 		path: "/api",
@@ -197,7 +209,7 @@ private sendDeveloperReq() {
 }
 
 private discoverHueBulbs() {
-    def host = getBridgeIP()
+	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/api/${state.username}/lights",
@@ -219,8 +231,8 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 private verifyHueBridges() {
 	def devices = getHueBridges().findAll { it?.value?.verified != true }
 	devices.each {
-        def ip = convertHexToIP(it.value.networkAddress)
-        def port = convertHexToInt(it.value.deviceAddress)
+		def ip = convertHexToIP(it.value.networkAddress)
+		def port = convertHexToInt(it.value.deviceAddress)
 		verifyHueBridge("${it.value.mac}", (ip + ":" + port))
 	}
 }
@@ -249,7 +261,7 @@ Map bulbsDiscovered() {
 		bulbs.each {
 			def value = "${it.name}"
 			def key = app.id +"/"+ it.id
-            logg += "$value - $key, "
+			logg += "$value - $key, "
 			bulbmap["${key}"] = value
 		}
 	}
@@ -276,22 +288,23 @@ def installed() {
 def updated() {
 	log.trace "Updated with settings: ${settings}"
 	unsubscribe()
-    unschedule()
+	unschedule()
 	initialize()
 }
 
 def initialize() {
 	log.debug "Initializing"
-    unsubscribe(bridge)
-    state.inBulbDiscovery = false
-    state.bridgeRefreshCount = 0
-    state.bulbRefreshCount = 0
+	unsubscribe(bridge)
+	state.inBulbDiscovery = false
+	state.bridgeRefreshCount = 0
+	state.bulbRefreshCount = 0
 	state.updating = false
+	setupDeviceWatch()
 	if (selectedHue) {
-   		addBridge()
-        addBulbs()
-        doDeviceSync()
-        runEvery5Minutes("doDeviceSync")
+		addBridge()
+		addBulbs()
+		doDeviceSync()
+		runEvery5Minutes("doDeviceSync")
 	}
 }
 
@@ -309,6 +322,14 @@ def uninstalled(){
 	state.username = null
 }
 
+private setupDeviceWatch() {
+	def hub = location.hubs[0]
+	// Make sure that all child devices are enrolled in device watch
+	getChildDevices().each {
+		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
+	}
+}
+
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -357,7 +378,6 @@ def addBulbs() {
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
 						d.completedSetup = true
-						d.refresh()
 					}
 				} else {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
@@ -387,23 +407,23 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-     		// compatibility with old devices
-            def newbridge = true
-            childDevices.each {
-            	if (it.getDeviceDataByName("mac")) {
-                    def newDNI = "${it.getDeviceDataByName("mac")}"
-                    if (newDNI != it.deviceNetworkId) {
-                    	def oldDNI = it.deviceNetworkId
-                        log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-                        it.setDeviceNetworkId("${newDNI}")
+	 		// compatibility with old devices
+			def newbridge = true
+			childDevices.each {
+				if (it.getDeviceDataByName("mac")) {
+					def newDNI = "${it.getDeviceDataByName("mac")}"
+					if (newDNI != it.deviceNetworkId) {
+						def oldDNI = it.deviceNetworkId
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+						it.setDeviceNetworkId("${newDNI}")
 						if (oldDNI == selectedHue) {
 							app.updateSetting("selectedHue", newDNI)
 						}
-                        newbridge = false
-                    }
-                }
-            }
-        	if (newbridge) {
+						newbridge = false
+					}
+				}
+			}
+			if (newbridge) {
 				// Hue uses last 6 digits of MAC address as ID number, this number is shown on the bottom of the bridge
 				def idNumber = getBridgeIdNumber(selectedHue)
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub, ["label": "Hue Bridge ($idNumber)"])
@@ -414,9 +434,11 @@ def addBridge() {
 					d.completedSetup = true
 					log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
 					def childDevice = getChildDevice(d.deviceNetworkId)
+					childDevice?.sendEvent(name: "status", value: "Online")
+					childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					updateBridgeStatus(childDevice)
-					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
+					childDevice?.sendEvent(name: "idNumber", value: idNumber)
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -568,47 +590,47 @@ void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
 @Deprecated
 def locationHandler(evt) {
 	def description = evt.description
-    log.trace "Location: $description"
+	log.trace "Location: $description"
 
 	def hub = evt?.hubId
  	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
-    	//SSDP DISCOVERY EVENTS
+		//SSDP DISCOVERY EVENTS
 		log.trace "SSDP DISCOVERY EVENTS"
 		def bridges = getHueBridges()
 		log.trace bridges.toString()
 		if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
-        	//bridge does not exist
+			//bridge does not exist
 			log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
 			bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
 		} else {
 			// update the values
-            def ip = convertHexToIP(parsedEvent.networkAddress)
-            def port = convertHexToInt(parsedEvent.deviceAddress)
-            def host = ip + ":" + port
+			def ip = convertHexToIP(parsedEvent.networkAddress)
+			def port = convertHexToInt(parsedEvent.deviceAddress)
+			def host = ip + ":" + port
 			log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
-            def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+			def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
 			def dni = "${parsedEvent.mac}"
-            def d = getChildDevice(dni)
-            def networkAddress = null
-            if (!d) {
-            	childDevices.each {
-                    if (it.getDeviceDataByName("mac")) {
-                        def newDNI = "${it.getDeviceDataByName("mac")}"
+			def d = getChildDevice(dni)
+			def networkAddress = null
+			if (!d) {
+				childDevices.each {
+					if (it.getDeviceDataByName("mac")) {
+						def newDNI = "${it.getDeviceDataByName("mac")}"
 						d = it
-                        if (newDNI != it.deviceNetworkId) {
-                            def oldDNI = it.deviceNetworkId
-                            log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-                            it.setDeviceNetworkId("${newDNI}")
+						if (newDNI != it.deviceNetworkId) {
+							def oldDNI = it.deviceNetworkId
+							log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+							it.setDeviceNetworkId("${newDNI}")
 							if (oldDNI == selectedHue) {
 								app.updateSetting("selectedHue", newDNI)
 							}
-                            doDeviceSync()
-                        }
-                    }
-                }
+							doDeviceSync()
+						}
+					}
+				}
 			} else {
 				updateBridgeStatus(d)
 				if (d.getDeviceDataByName("networkAddress")) {
@@ -616,22 +638,22 @@ def locationHandler(evt) {
 				} else {
 					networkAddress = d.latestState('networkAddress').stringValue
 				}
-                log.trace "Host: $host - $networkAddress"
-                if(host != networkAddress) {
-                    log.debug "Device's port or ip changed for device $d..."
-                    dstate.ip = ip
-                    dstate.port = port
-                    dstate.name = "Philips hue ($ip)"
-                    d.sendEvent(name:"networkAddress", value: host)
-                    d.updateDataValue("networkAddress", host)
-            	}
-            }
+				log.trace "Host: $host - $networkAddress"
+				if(host != networkAddress) {
+					log.debug "Device's port or ip changed for device $d..."
+					dstate.ip = ip
+					dstate.port = port
+					dstate.name = "Philips hue ($ip)"
+					d.sendEvent(name:"networkAddress", value: host)
+					d.updateDataValue("networkAddress", host)
+				}
+			}
 		}
 	} else if (parsedEvent.headers && parsedEvent.body) {
 		log.trace "HUE BRIDGE RESPONSES"
 		def headerString = parsedEvent.headers.toString()
 		if (headerString?.contains("xml")) {
-            log.trace "description.xml response (application/xml)"
+			log.trace "description.xml response (application/xml)"
 			def body = new XmlSlurper().parseText(parsedEvent.body)
 			if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
 				def bridges = getHueBridges()
@@ -643,7 +665,7 @@ def locationHandler(evt) {
 				}
 			}
 		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
-            log.trace "description.xml response (application/json)"
+			log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
@@ -680,7 +702,7 @@ def doDeviceSync(){
 	poll()
 	ssdpSubscribe()
 	discoverBridges()
-    checkBridgeStatus()
+	checkBridgeStatus()
 }
 
 /**
@@ -693,10 +715,14 @@ def doDeviceSync(){
 private void updateBridgeStatus(childDevice) {
 	// Update activity timestamp if child device is a valid bridge
 	def vbridges = getVerifiedHueBridges()
-	def vbridge = vbridges.find {"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()}
+	def vbridge = vbridges.find {
+		"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()
+	}
 	vbridge?.value?.lastActivity = now()
-	if(vbridge) {
+	if (vbridge && childDevice?.device?.currentValue("status") == "Offline") {
+		log.debug "$childDevice is back Online"
 		childDevice?.sendEvent(name: "status", value: "Online")
+		childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 	}
 }
 
@@ -705,29 +731,37 @@ private void updateBridgeStatus(childDevice) {
  * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
-    def bridges = getHueBridges()
-    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 11)
-    bridges.each {
-        def d = getChildDevice(it.value.mac)
-	    if(d) {
-		    // Set id number on bridge if not done
-		    if (it.value.idNumber == null) {
-			    it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
+	def bridges = getHueBridges()
+	// Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
+	def time = now() - (1000 * 60 * 11)
+	bridges.each {
+		def d = getChildDevice(it.value.mac)
+		if (d) {
+			// Set id number on bridge if not done
+			if (it.value.idNumber == null) {
+				it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
-		    }
+			}
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.value.idNumber is Offline"
-				d.sendEvent(name: "status", value: "Offline")
+				if (d.currentStatus == "Online") {
+					log.warn "$d is Offline"
+					d.sendEvent(name: "status", value: "Offline")
+					d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 
-				state.bulbs?.each {
-					it.value.online = false
+					Calendar currentTime = Calendar.getInstance()
+					getChildDevices().each {
+						def id = getId(it)
+						if (state.bulbs[id]?.online == true) {
+							state.bulbs[id]?.online = false
+							state.bulbs[id]?.unreachableSince = currentTime.getTimeInMillis()
+							it.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
+						}
+					}
 				}
-				getChildDevices().each {
-					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
-				}
-			} else {
+			} else if (d.currentStatus == "Offline") {
+				log.debug "$d is back Online"
+				d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
 			}
 		}
@@ -779,24 +813,24 @@ def parse(childDevice, description) {
 	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
-        def bodyString = parsedEvent.body.toString()
+		def bodyString = parsedEvent.body.toString()
 		if (headerString?.contains("json")) {
-        	def body
-        	try {
-            	body = new groovy.json.JsonSlurper().parseText(bodyString)
-            } catch (all) {
-            	log.warn "Parsing Body failed - trying again..."
-                poll()
-            }
-            if (body instanceof java.util.Map) {
-                // get (poll) reponse
-                return handlePoll(body)
+			def body
+			try {
+				body = new groovy.json.JsonSlurper().parseText(bodyString)
+			} catch (all) {
+				log.warn "Parsing Body failed - trying again..."
+				poll()
+			}
+			if (body instanceof java.util.Map) {
+				// get (poll) reponse
+				return handlePoll(body)
 			} else {
 				//put response
 				return handleCommandResponse(body)
-            }
-        }
-   } else {
+			}
+		}
+	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
 	}
@@ -817,19 +851,19 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 		device.sendEvent([name: "colorTemperature", value: temp, descriptionText: "Color temperature has changed"])
 		// Return because color temperature change is not counted as a color change in SmartThings so no hex update necessary
 		return
-                    }
+	}
 
 	if (hue != null) {
 		// 0-65535
 		def value = Math.min(Math.round(hue * 100 / 65535), 65535) as int
 		events["hue"] = [name: "hue", value: value, descriptionText: "Color has changed", displayed: false]
-                }
+	}
 
 	if (sat != null) {
 		// 0-254
 		def value = Math.round(sat * 100 / 254) as int
-        events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
-            }
+		events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
+	}
 
 	// Following is used to decide what to base hex calculations on since it is preferred to return a colorchange in hex
 	if (xy != null && colormode != "hs") {
@@ -915,8 +949,15 @@ private handleCommandResponse(body) {
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
-		} else if (payload.error) {
-			log.warn "Error returned from Hue bridge error = ${body?.error}"
+		} else if (payload?.error) {
+			log.warn "Error returned from Hue bridge, error = ${payload?.error}"
+			// Check for unauthorized user
+			if (payload?.error?.type?.value == 1) {
+				log.error "Hue username is not valid"
+				state.refreshUsernameNeeded = true
+				state.username = null
+			}
+			return []
 		}
 	}
 
@@ -924,12 +965,9 @@ private handleCommandResponse(body) {
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
 		def id = getId(device)
-		// If device is offline, then don't send events which will update device watch
-		if (isOnline(id)) {
-			sendBasicEvents(device, "on", params.on)
-			sendBasicEvents(device, "bri", params.bri)
-			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
-		}
+		sendBasicEvents(device, "on", params.on)
+		sendBasicEvents(device, "bri", params.bri)
+		sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
 	}
 	return []
 }
@@ -962,39 +1000,38 @@ private handlePoll(body) {
 
 	def bulbs = getChildDevices()
 	for (bulb in body) {
-		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
+		def device = bulbs.find { it.deviceNetworkId == "${app.id}/${bulb.key}" }
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				if (state.bulbs[bulb.key]?.online == false) {
+				if (state.bulbs[bulb.key]?.online == false || state.bulbs[bulb.key]?.online == null) {
 					// light just came back online, notify device watch
-					def lastActivity = now()
-					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+					device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					log.debug "$device is Online"
 				}
 				// Mark light as "online"
 				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
-
-				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
-				if (!state.updating) {
-					sendBasicEvents(device, "on", bulb.value?.state?.on)
-					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
-					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
-				}
 			} else {
 				if (state.bulbs[bulb.key]?.unreachableSince == null) {
 					// Store the first time where device was reported as "unreachable"
 					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
-				} else if (state.bulbs[bulb.key]?.online) {
+				}
+				if (state.bulbs[bulb.key]?.online || state.bulbs[bulb.key]?.online == null) {
 					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
-					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis() || state.bulbs[bulb.key]?.online == null) {
 						log.warn "$device went Offline"
 						state.bulbs[bulb.key]?.online = false
-						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+						device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 					}
 				}
 				log.warn "$device may not reachable by Hue bridge"
 			}
+			// If user just executed commands, then do not send events to avoid confusing the turning on/off state
+			if (!state.updating) {
+				sendBasicEvents(device, "on", bulb.value?.state?.on)
+				sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+				sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+			}
 		}
 	}
 	return []
@@ -1013,16 +1050,16 @@ def updateHandler() {
 
 def hubVerification(bodytext) {
 	log.trace "Bridge sent back description.xml for verification"
-    def body = new XmlSlurper().parseText(bodytext)
-    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-        def bridges = getHueBridges()
-        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-        if (bridge) {
-            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-        } else {
-            log.error "/description.xml returned a bridge that didn't exist"
-        }
-    }
+	def body = new XmlSlurper().parseText(bodytext)
+	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+		def bridges = getHueBridges()
+		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (bridge) {
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a bridge that didn't exist"
+		}
+	}
 }
 
 def on(childDevice) {
@@ -1031,7 +1068,7 @@ def on(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
-    return "Bulb is turning On"
+	return "Bulb is turning On"
 }
 
 def off(childDevice) {
@@ -1040,15 +1077,15 @@ def off(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
-    return "Bulb is turning Off"
+	return "Bulb is turning Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 1 - 254
-    def level
+	def level
 	if (percent == 1)
 		level = 1
 	else
@@ -1082,7 +1119,7 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
@@ -1094,7 +1131,7 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
@@ -1103,14 +1140,14 @@ def setColorTemperature(childDevice, huesettings) {
 }
 
 def setColor(childDevice, huesettings) {
-    log.debug "Executing 'setColor($huesettings)'"
+	log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 
-    def value = [:]
-    def hue = null
-    def sat = null
-    def xy = null
+	def value = [:]
+	def hue = null
+	def sat = null
+	def xy = null
 
 	// Prefer hue/sat over hex to make sure it works with the majority of the smartapps
 	if (huesettings.hue != null || huesettings.sat != null) {
@@ -1135,48 +1172,32 @@ def setColor(childDevice, huesettings) {
 		// value.xy = calculateXY(hex, model)
 		// Once groups, or scenes are introduced it might be a good idea to use unique models again
 		value.xy = calculateXY(hex)
-    }
+	}
 */
 
-    // Default behavior is to turn light on
-    value.on = true
+	// Default behavior is to turn light on
+	value.on = true
 
-    if (huesettings.level != null) {
-        if (huesettings.level <= 0)
-            value.on = false
-        else if (huesettings.level == 1)
-            value.bri = 1
-        else
+	if (huesettings.level != null) {
+		if (huesettings.level <= 0)
+			value.on = false
+		else if (huesettings.level == 1)
+			value.bri = 1
+		else
 			value.bri = Math.min(Math.round(huesettings.level * 254 / 100), 254)
-    }
-    value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
+	}
+	value.alert = huesettings.alert ? huesettings.alert : "none"
+	value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
-    // Make sure to turn off light if requested
-    if (huesettings.switch == "off")
-        value.on = false
+	// Make sure to turn off light if requested
+	if (huesettings.switch == "off")
+		value.on = false
 
 	createSwitchEvent(childDevice, value.on ? "on" : "off")
-    put("lights/$id/state", value)
+	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
 
-def ping(childDevice) {
-	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
-		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
-			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
-			return "Bridge is Online"
-		} else {
-			return "Bridge is Offline"
-		}
-	} else if (isOnline(getId(childDevice))) {
-		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
-		return "Device is Online"
-	} else {
-		return "Device is Offline"
-	}
-}
-
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
@@ -1227,30 +1248,30 @@ private getBridgeIdNumber(serialNumber) {
 private getBridgeIP() {
 	def host = null
 	if (selectedHue) {
-        def d = getChildDevice(selectedHue)
-    	if (d) {
-        	if (d.getDeviceDataByName("networkAddress"))
-            	host =  d.getDeviceDataByName("networkAddress")
-        else
-        		host = d.latestState('networkAddress').stringValue
-        }
-        if (host == null || host == "") {
-            def serialNumber = selectedHue
-            def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) {
-            	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
-            }
-            if (bridge?.ip && bridge?.port) {
-            	if (bridge?.ip.contains("."))
-            		host = "${bridge?.ip}:${bridge?.port}"
-                else
-                	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
-            } else if (bridge?.networkAddress && bridge?.deviceAddress)
-            	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }
-        log.trace "Bridge: $selectedHue - Host: $host"
-    }
-    return host
+		def d = getChildDevice(selectedHue)
+		if (d) {
+			if (d.getDeviceDataByName("networkAddress"))
+				host =  d.getDeviceDataByName("networkAddress")
+		else
+				host = d.latestState('networkAddress').stringValue
+		}
+		if (host == null || host == "") {
+			def serialNumber = selectedHue
+			def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
+			if (!bridge) {
+				bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
+			}
+			if (bridge?.ip && bridge?.port) {
+				if (bridge?.ip.contains("."))
+					host = "${bridge?.ip}:${bridge?.port}"
+				else
+					host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
+			} else if (bridge?.networkAddress && bridge?.deviceAddress)
+				host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
+		}
+		log.trace "Bridge: $selectedHue - Host: $host"
+	}
+	return host
 }
 
 private Integer convertHexToInt(hex) {
@@ -1290,7 +1311,7 @@ private List getRealHubFirmwareVersions() {
  * @param childDevice device to send event for
  * @param setSwitch The new switch state, "on" or "off"
  * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- *                  that should generate "off" instead of level change
+ *				  that should generate "off" instead of level change
  */
 private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 
@@ -1433,8 +1454,8 @@ private float[] calculateXY(colorStr, model = null) {
 		xy[0] = closestPoint.x;
 		xy[1] = closestPoint.y;
 	}
-	//        xy[0] = PHHueHelper.precision(4, xy[0]);
-	//        xy[1] = PHHueHelper.precision(4, xy[1]);
+	//		xy[0] = PHHueHelper.precision(4, xy[0]);
+	//		xy[1] = PHHueHelper.precision(4, xy[1]);
 
 
 	// TODO needed, assume it just sets number of decimals?
@@ -1452,7 +1473,7 @@ private float[] calculateXY(colorStr, model = null) {
  *
  * @param points the float array contain x and the y value. [x,y]
  * @param model the model of the lamp, example: "LCT001" for hue bulb. Used to calculate the color gamut.
- *          If this value is empty the default gamut values are used.
+ *		If this value is empty the default gamut values are used.
  * @return the color value in hex (#ff03d3). If xy is null OR xy is not an array of size 2, Color. BLACK will be returned
  */
 private String colorFromXY(points, model ) {
@@ -1766,3 +1787,4 @@ def hsvToHex(hue, sat, value = 100){
 
 	return "#$r1$g1$b1"
 }
+

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -242,8 +242,6 @@ def installed() {
 	} else {
 		initialize()
 	}
-	// Check for new devices and remove old ones every 3 hours
-	runEvery3Hours('updateDevices')
 }
 
 // called after settings are changed
@@ -271,9 +269,19 @@ private removeChildDevices(devices) {
 def initialize() {
 	log.debug "initialize"
 	updateDevices()
+	// Check for new devices and remove old ones every 3 hours
+	runEvery5Minutes('updateDevices')
+	setupDeviceWatch()
 }
 
 // Misc
+private setupDeviceWatch() {
+	def hub = location.hubs[0]
+	// Make sure that all child devices are enrolled in device watch
+	getChildDevices().each {
+		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
+	}
+}
 
 Map apiRequestHeaders() {
 	return ["Authorization": "Bearer ${state.lifxAccessToken}",
@@ -376,7 +384,7 @@ def updateDevices() {
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),
-					switch: device.connected ? device.power : "unreachable",
+					switch: device.power,
 					colorTemperature: device.color.kelvin
 			]
 			if (device.product.capabilities.has_color) {
@@ -387,18 +395,42 @@ def updateDevices() {
 			} else {
 				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
+			childDevice?.completedSetup = true
+		} else {
+			if (device.product.capabilities.has_color) {
+				sendEvent(name: "color", value: colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int))
+				sendEvent(name: "hue", value: device.color.hue / 3.6)
+				sendEvent(name: "saturation", value: device.color.saturation * 100)
+			}
+			childDevice.sendEvent(name: "label", value: device.label)
+			childDevice.sendEvent(name: "level", value: Math.round((device.brightness ?: 1) * 100))
+			childDevice.sendEvent(name: "switch.setLevel", value: Math.round((device.brightness ?: 1) * 100))
+			childDevice.sendEvent(name: "switch", value: device.power)
+			childDevice.sendEvent(name: "colorTemperature", value: device.color.kelvin)
+			childDevice.sendEvent(name: "model", value: device.product.name)
 		}
+
+		if (state.devices[device.id] == null) {
+			// State missing, add it and set it to opposite status as current status to provoke event below
+			state.devices[device.id] = [online : !device.connected]
+		}
+
+		if (!state.devices[device.id]?.online && device.connected) {
+			// Device came online after being offline
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+			log.debug "$device is back Online"
+		} else if (state.devices[device.id]?.online && !device.connected) {
+			// Device went offline after being online
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+			log.debug "$device went Offline"
+		}
+		state.devices[device.id] = [online: device.connected]
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
+		state.devices[it.deviceNetworkId] = null
 		deleteChildDevice(it.deviceNetworkId)
 	}
-	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
 }
 
-def refreshDevices() {
-	log.info("Refreshing all devices...")
-	getChildDevices().each { device ->
-		device.refresh()
-	}
-}
+

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -24,6 +24,12 @@
  *  switches             | switch            | on, off                     | on, off
  *  motionSensors        | motion            |                             | active, inactive
  *  contactSensors       | contact           |                             | open, closed
+ *  thermostat           | thermostat        | setHeatingSetpoint,         | temperature, heatingSetpoint
+ *                       |                   | setCoolingSetpoint(number)  | coolingSetpoint, thermostatSetpoint
+ *                       |                   | off, heat, emergencyHeat    | thermostatMode — ["emergency heat", "auto", "cool", "off", "heat"]
+ *                       |                   | cool, setThermostatMode     | thermostatFanMode — ["auto", "on", "circulate"]
+ *                       |                   | fanOn, fanAuto, fanCirculate| thermostatOperatingState — ["cooling", "heating", "pending heat",
+ *                       |                   | setThermostatFanMode, auto  | "fan only", "vent economizer", "pending cool", "idle"]
  *  presenceSensors      | presence          |                             | present, 'not present'
  *  temperatureSensors   | temperature       |                             | <numeric, F or C according to unit>
  *  accelerationSensors  | acceleration      |                             | active, inactive
@@ -58,6 +64,7 @@ preferences(oauthPage: "deviceAuthorization") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 			input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 			input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
+      input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
 			input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
 			input "temperatureSensors", "capability.temperatureMeasurement", title: "Which Temperature Sensors?", multiple: true, required: false
 			input "accelerationSensors", "capability.accelerationSensor", title: "Which Vibration Sensors?", multiple: true, required: false
@@ -936,7 +943,7 @@ def deleteHarmony() {
 }
 
 private getAllDevices() {
-	([] + switches + motionSensors + contactSensors + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
+	([] + switches + motionSensors + contactSensors + thermostats + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
 }
 
 private deviceItem(device) {