Merge pull request #1834 from parijatdas/zwave_water_valve

[CHF-569] Health Check zwave-water-valve
Merge pull request #2006 from SmartThingsCommunity/staging
2026-04-26 06:13:06 +01:00 · 2017-05-17 17:05:10 -07:00 · 2017-05-16 15:37:10 -07:00 · 2017-05-16 14:37:15 -07:00 · 2017-05-16 12:26:48 +05:30 · 2017-05-15 12:31:34 -07:00
179 changed files with 6580 additions and 2282 deletions
@@ -0,0 +1,44 @@
+# Express Controls EZMultiPli
+
+Works with: 
+
+* [Express Controls EZMultiPli](https://www.smartthings.com/works-with-smartthings/)
+
+## Table of contents
+
+* [Release Notes](#release-notes)
+* [Capabilities](#capabilities)
+* [Troubleshooting](#troubleshooting)
+
+## Release Notes
+
+* **2017-04-19** - _dkirker_ - Update default config values in config value range check functions, use lux if lum option is null, fix NullPointerException on initial pairing when color data has not been set (and set the default color data!)
+* **2017-04-10** - _DrZwave_ (with help from Donald Kirker) - changed fingerprint to the new format, lowered the OnTime and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+* **2016-10-06** - _erocm1231_ - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+* **2016-01-28** - _erocm1231_ - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers. Also, added configurationGet and a configurationReport method so that config values can be verified.
+* **2015-12-04** - _erocm1231_ - added range value to preferences as suggested by @Dela-Rick.
+* **2015-11-26** - _erocm1231_ - Fixed null condition error when adding as a new device. 
+* **2015-11-24** - _erocm1231_ - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed the device not having its on/off status updated when colors are changed.
+* **2015-11-23** - _erocm1231_ - Changed the look to match SmartThings v2 devices. 
+* **2015-11-21** - _erocm1231_ - Made code much more efficient. Also made it compatible when setColor is passed a hex value. Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, Daylight - Energize - Teal, Warm White - Relax - Yellow
+* **2015-11-19** - _erocm1231_ - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+* **2015-11-18** - _erocm1231_ - Added to setColor for compatibility with Smart Lighting
+* **v0.1.0** - _DrZWave_ - chose better icons, Got color LED to work - first fully functional version
+* **v0.0.9** - _jrs_ - got the temp and luminance to work. Motion works. Debugging the color wheel.
+* **v0.0.8** - _DrZWave_ 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+* **v0.0.7** - _jrs_ - 02/23/2015 - Jim Sulin
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Sensor** - detects sensor events
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Switch** - can detect state (possible values: on/off)
+* **Color Control** - represents that the color attributes of a device can be controlled (hue, saturation, color value
+* **Configuration** - configure() command called when device is installed or device preferences updated
+* **Refresh** - refresh() command for status updates
+
+## Troubleshooting
+
@@ -0,0 +1,405 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Actuator"
+	capability "Sensor"
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    capability "Refresh"
+
+	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+	} //end simulator
+
+    
+    tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
+				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+				attributeState "statusText", label:'${currentValue}'
+			}
+        }
+
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#153591"], // blue=cold
+				[value: 65, color: "#44b621"], // green
+				[value: 70, color: "#44b621"], // green
+				[value: 75, color: "#f1d801"], // yellow
+				[value: 80, color: "#f1d801"], // yellow
+				[value: 85, color: "#f1d801"], // yellow
+				[value: 90, color: "#d04e00"], // red
+				[value: 95, color: "#bc2323"]  // red=hot
+			]
+		}
+
+        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+			//state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"],
+                //lux measurement values
+                [value: 150, color: "#404040"],
+				[value: 300, color: "#808080"],
+				[value: 600, color: "#a0a0a0"],
+				[value: 900, color: "#e0e0e0"]
+			]
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}    
+		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["temperature","motion", "switch"])
+		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
+	}  // end tiles
+    
+	preferences {
+       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
+       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
+       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
+       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
+          [1:"Percent",
+           2:"Lux"])
+  }
+
+} // end metadata
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	//log.debug "==> New Zwave Event: ${description}"
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		def cmdData = zwaveEvent(cmd)
+		if (cmdData != [:])
+			result << createEvent(cmdData)
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == 1) ? "%" : "LUX"}"
+    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
+	}
+    if (result != [null] && result != []) log.debug "Parse returned ${result}"
+    
+    
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+            if(lum == 1) map.unit = "%"
+            else map.unit = "lux"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    // The EZMultiPli sets the color back to #ffffff on "off" or at init, so update the ST device to reflect this.
+    if (device.latestState("color") == null || (cmd.value == 0 && device.latestState("color").value != "#ffffff")) {
+        sendEvent(name: "color", value: "#ffffff", displayed: true)
+    }
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def updated()
+{
+    log.debug "updated() is being called"
+    
+    def cmds = configure()
+    
+    if (cmds != []) response(cmds)
+}
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value}"
+    def myred
+    def mygreen
+    def myblue
+    def hexValue
+    def cmds = []
+
+    if ( value.level == 1 && value.saturation > 20) {
+		def rgb = huesatToRGB(value.hue as Integer, 100)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if ( value.level > 1 ) {
+		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if (value.hex) {
+		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    }
+    else {
+        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+        mygreen=value.green >=128 ? 255 : 0
+        myblue=value.blue>=128 ? 255 : 0
+    }
+    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
+  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+    // So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    cmds << zwave.basicV1.basicGet().format()
+    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
+    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=6
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 6			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=2
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 2			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+def refresh() {
+	def cmd = []
+    cmd << zwave.switchColorV3.switchColorGet().format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
+    cmd << zwave.basicV1.basicGet().format()
+    delayBetween(cmd, 1000)
+}
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
+	], 100)
+	//log.debug cmd
+	cmd + refresh()
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}
+def rgbToHex(rgb) {
+    def r = hex(rgb.r)
+    def g = hex(rgb.g)
+    def b = hex(rgb.b)
+    def hexColor = "#${r}${g}${b}"
+    
+    hexColor
+}
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
@@ -14,7 +14,7 @@
 *
 */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,41 @@
+# Fibaro Door Window Sensor ZW5
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor ZW5](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Tamper Alert** - detects tampers
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor ZW5 is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor ZW5 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)
@@ -14,12 +14,13 @@
 *
 */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
        capability "Configuration"
        capability "Tamper Alert"
+		capability "Health Check"

        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
 	}
@@ -199,6 +200,8 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca

 def configure() {
 	log.debug "Executing 'configure'"
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

    def cmds = []

@@ -14,7 +14,7 @@
 *
 */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
@@ -34,13 +34,13 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
 			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
+				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
 			}

 			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
+				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
 			}
 		}

@@ -14,7 +14,7 @@
 *
 */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"
@@ -34,8 +34,8 @@ metadata {
    tiles(scale: 2) {
    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
            }

            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -95,10 +95,10 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
        	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
 			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
 			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
@@ -135,13 +135,13 @@ metadata {
    	}        
        
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
        
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
        
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
        
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
        
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,39 @@
+# Keen Home Smart Vent
+
+Cloud Execution
+
+Works with: 
+
+* [Keen Home Smart Vent](https://www.smartthings.com/works-with-smartthings/keen-home/keen-home-smart-vent)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Sensor** - detects sensor events
+* **Temperature Measurement** - represents capability to measure temperature
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Keen Home Smart Vent with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Keen Home Smart Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205302050-Keen-Home-Smart-Vent)
@@ -11,6 +11,7 @@ metadata {
        capability "Sensor"
        capability "Temperature Measurement"
        capability "Battery"
+        capability "Health Check"

        command "getLevel"
        command "getOnOff"
@@ -20,10 +21,7 @@ metadata {
        command "setZigBeeIdTile"
        command "clearObstruction"

-        fingerprint endpoint: "1",
-        profileId: "0104",
-        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
-        outClusters: "0019"
+        fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019"
    }

    // simulator metadata
@@ -466,15 +464,27 @@ def refresh() {
    getBattery()
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def configure() {
    log.debug "CONFIGURE"

+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
    // get ZigBee ID by hidden tile because that's the only way we can do it
    setZigBeeIdTile()

    def configCmds = [
        // bind reporting clusters to hub
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
+            //commenting out switch cluster bind as using wrapper onOffConfig of zigbee class
+        //"zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
@@ -510,5 +520,5 @@ def configure() {
        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
    ]

-    return configCmds + refresh()
+    return configCmds + zigbee.onOffConfig() + refresh()
 }
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,33 @@
+# Osotech Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)
@@ -24,6 +24,7 @@ import groovy.json.JsonBuilder
 metadata {
    definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
        capability "Sensor"
+        capability "Health Check"

        command "setStatusIcon"
        command "setPlantFuelLevel"
@@ -70,6 +71,16 @@ metadata {
    }
 }

+def updated() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def setStatusIcon(value){
    def status = ''
    switch (value) {
@@ -1,6 +1,5 @@
 /**
- *  Spruce Controller - Pre Release V2 10/11/2015
- *
+ *  Spruce Controller V2_4 Big Tiles *
 *  Copyright 2015 Plaid Systems
 *
 *	Author: NC
@@ -21,82 +20,96 @@
 */

 metadata {
-	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
-		capability "Switch"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Actuator"
-        capability "Valve"        
+	definition (name: 'Spruce Controller', namespace: 'plaidsystems', author: 'Plaid Systems') {
+		capability 'Switch'
+        capability 'Configuration'
+        capability 'Refresh'
+        capability 'Actuator'
+        capability 'Valve'        
 		
-        attribute "switch", "string"
-        attribute "switch1", "string"
-		attribute "switch2", "string"
-		attribute "switch8", "string"
-		attribute "switch5", "string"
-		attribute "switch3", "string"
-		attribute "switch4", "string"
-		attribute "switch6", "string"
-		attribute "switch7", "string"
-        attribute "switch9", "string"
-		attribute "switch10", "string"
-		attribute "switch11", "string"
-		attribute "switch12", "string"
-		attribute "switch13", "string"
-		attribute "switch14", "string"
-		attribute "switch15", "string"
-        attribute "switch16", "string"
-		attribute "status", "string"        
+        attribute 'switch', 'string'
+        attribute 'switch1', 'string'
+		attribute 'switch2', 'string'
+		attribute 'switch8', 'string'
+		attribute 'switch5', 'string'
+		attribute 'switch3', 'string'
+		attribute 'switch4', 'string'
+		attribute 'switch6', 'string'
+		attribute 'switch7', 'string'
+        attribute 'switch9', 'string'
+		attribute 'switch10', 'string'
+		attribute 'switch11', 'string'
+		attribute 'switch12', 'string'
+		attribute 'switch13', 'string'
+		attribute 'switch14', 'string'
+		attribute 'switch15', 'string'
+        attribute 'switch16', 'string'
+		attribute 'rainsensor', 'string'
+        attribute 'status', 'string'
+        attribute 'tileMessage', 'string'
+        attribute 'minutes', 'string'
+        attribute 'VALUE_UP', 'string'
+        attribute 'VALUE_DOWN', 'string'        
        
-        command "programOn"
-        command "programOff"
-        command "on"
-        command "off"
-        command "z1on"
-		command "z1off"
-		command "z2on"
-		command "z2off"        
-		command "z3on"
-		command "z3off"
-		command "z4on"
-		command "z4off"
-		command "z5on"
-		command "z5off"
-		command "z6on"
-		command "z6off"
-		command "z7on"
-		command "z7off"
-		command "z8on"
-		command "z8off"
-        command "z9on"
-        command "z9off"
-		command "z10on"
-		command "z10off"
-		command "z11on"
-		command "z11off"
-		command "z12on"
-		command "z12off"
-		command "z13on"
-		command "z13off"
-		command "z14on"
-		command "z14off"
-		command "z15on"
-		command "z15off"
-		command "z16on"
-		command "z16off"
-        command "offtime"
+        command 'levelUp'
+        command 'levelDown'
+        command 'programOn'
+        command 'programOff'
+        command 'programWait'
+        command 'programEnd'
        
-        command "refresh"        
-        command "rain"
-        command "manual"
-        command "setDisplay"
+        command 'on'
+        command 'off'
+        command 'zon'
+        command 'zoff'
+        command 'z1on'
+		command 'z1off'
+		command 'z2on'
+		command 'z2off'        
+		command 'z3on'
+		command 'z3off'
+		command 'z4on'
+		command 'z4off'
+		command 'z5on'
+		command 'z5off'
+		command 'z6on'
+		command 'z6off'
+		command 'z7on'
+		command 'z7off'
+		command 'z8on'
+		command 'z8off'
+        command 'z9on'
+        command 'z9off'
+		command 'z10on'
+		command 'z10off'
+		command 'z11on'
+		command 'z11off'
+		command 'z12on'
+		command 'z12off'
+		command 'z13on'
+		command 'z13off'
+		command 'z14on'
+		command 'z14off'
+		command 'z15on'
+		command 'z15off'
+		command 'z16on'
+		command 'z16off'
        
-        command "settingsMap"
-        command "writeTime"
-        command "writeType"        
-        command "notify"
-        command "updated"
+        command 'config'
+        command 'refresh'        
+        command 'rain'
+        command 'manual'
+        command 'manualTime'
+        command 'settingsMap'
+        command 'writeTime'
+        command 'writeType'        
+        command 'notify'
+        command 'updated'      
        
-		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
+		//ST release
+		//fingerprint endpointId: '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18', profileId: '0104', deviceId: '0002', deviceVersion: '00', inClusters: '0000,0003,0004,0005,0006,000F', outClusters: '0003, 0019', manufacturer: 'PLAID SYSTEMS', model: 'PS-SPRZ16-01'
+		//new release
+        fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,0009,000A,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
 		
 	}

@@ -105,161 +118,229 @@ metadata {
 		// status messages
 		
 		// reply messages		
-		
 	}
+    
    preferences {
-    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
-    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
-    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
+    input description: 'If you have a rain sensor wired to the rain sensor input on the Spruce controller, turn it on here.', displayDuringSetup: true, type: 'paragraph', element: 'paragraph', title: 'Rain Sensor'
+    input description: 'The SYNC SETTINGS button must be pressed after making a change to the Rain sensor:', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''     
+    input 'RainEnable', 'bool', title: 'Rain Sensor Attached?', required: false, displayDuringSetup: true
+    input description: 'Adjust manual water time with arrows on main tile.  The time indicated in the first small tile indicates the time the zone will water when manually switched on.', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''
    }

 	// UI tile definitions
 	tiles {
    
-    	standardTile("status", "device.status") {            
-            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
-            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
-            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
-            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
-            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
-            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#00A0DC"
-            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
-            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
-            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
-            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#cccccc"
-            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
-            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
-        }
-		standardTile("switch", "device.switch") {			
-			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
-            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-		}
-        standardTile("rainsensor", "device.rainsensor") {			
-			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
-            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
-		}    	
-        standardTile("switch1", "device.switch1") {			
-			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch2", "device.switch2") {            
-            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}        
-        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
-			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
-            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
-            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
-            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
-            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
-            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
-			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
-            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}        
-        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
-			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
-            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
-            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
-            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}
-        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
-            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}		
-        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
-            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-		}        
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", action: "refresh", icon:"st.secondary.refresh"            
-		}
-        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+    	multiAttributeTile(name:"switchall", type:"generic", width:6, height:4) {        
+            tileAttribute('device.status', key: 'PRIMARY_CONTROL') {
+            attributeState 'schedule', label: 'Ready', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top.png'
+            attributeState 'finished', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#46c2e8'
+            attributeState 'raintoday', label: 'Rain Today', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'rainy', label: 'Rain', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'raintom', label: 'Rain Tomorrow', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            attributeState 'donewweek', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#00A0DC'
+            attributeState 'skipping', label: 'Skip', icon: 'st.Outdoor.outdoor20', backgroundColor: '#46c2e8'
+            attributeState 'moisture', label: 'Ready', icon: 'st.Weather.weather2', backgroundColor: '#46c2e8'
+            attributeState 'pause', label: 'PAUSE', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+			attributeState 'delayed', label: 'Delayed', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+            attributeState 'active', label: 'Active', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+            attributeState 'season', label: 'Adjust', icon: 'st.Outdoor.outdoor17', backgroundColor: '#ffb900'
+            attributeState 'disable', label: 'Off', icon: 'st.secondary.off', backgroundColor: '#cccccc'
+            attributeState 'warning', label: 'Warning', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top_yellow.png'
+            attributeState 'alarm', label: 'Alarm', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_s_red.png', backgroundColor: '#e66565'
            }
            
-        main (["status"])        
-        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
+            tileAttribute("device.minutes", key: "VALUE_CONTROL") {
+                attributeState "VALUE_UP", action: "levelUp"
+                attributeState "VALUE_DOWN", action: "levelDown"
+            }
+            
+            tileAttribute("device.tileMessage", key: "SECONDARY_CONTROL") {
+                attributeState "tileMessage", label: '${currentValue}'     
+            }            
+            
+        }
+        valueTile('minutes', 'device.minutes'){
+        	state 'minutes', label: '${currentValue} min'
+        }
+        valueTile('dummy', 'device.minutes'){
+        	state 'minutes', label: ''
+        }
+		standardTile('switch', 'device.switch', width:2, height:2) {
+            state 'off', label: 'Start', action: 'programOn', icon: 'st.Outdoor.outdoor12', backgroundColor: '#a9a9a9'
+            state 'programOn', label: 'Wait', action: 'programOff', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'programWait', label: 'Wait', action: 'programEnd', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state 'on', label: 'Running', action: 'programEnd', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+		}        
+        standardTile("rainsensor", "device.rainsensor", decoration: 'flat') {			
+			state "rainSensoroff", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
+            state "rainSensoron", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on_blue_small.png'
+            state "disable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_x_small.png'
+            state "enable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
+		}
+        standardTile('switch1', 'device.switch1', inactiveLabel: false) {			
+			state 'z1off', label: '1', action: 'z1on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z1on', label: '1', action: 'z1off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch2', 'device.switch2', inactiveLabel: false) {            
+            state 'z2off', label: '2', action: 'z2on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z2on', label: '2', action: 'z2off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}        
+        standardTile('switch3', 'device.switch3', inactiveLabel: false) {			
+			state 'z3off', label: '3', action: 'z3on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z3on', label: '3', action: 'z3off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch4', 'device.switch4', inactiveLabel: false) {            
+            state 'z4off', label: '4', action: 'z4on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z4on', label: '4', action: 'z4off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch5', 'device.switch5', inactiveLabel: false) {            
+            state 'z5off', label: '5', action: 'z5on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z5on', label: '5', action: 'z5off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch6', 'device.switch6', inactiveLabel: false) {            
+            state 'z6off', label: '6', action: 'z6on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z6on', label: '6', action: 'z6off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch7', 'device.switch7', inactiveLabel: false) {            
+            state 'z7off', label: '7', action: 'z7on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z7on', label: '7', action: 'z7off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch8', 'device.switch8', inactiveLabel: false) {            
+            state 'z8off', label: '8', action: 'z8on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z8on', label: '8', action: 'z8off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch9', 'device.switch9', inactiveLabel: false) {			
+			state 'z9off', label: '9', action: 'z9on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z9on', label: '9', action: 'z9off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch10', 'device.switch10', inactiveLabel: false) {            
+            state 'z10off', label: '10', action: 'z10on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z10on', label: '10', action: 'z10off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}        
+        standardTile('switch11', 'device.switch11', inactiveLabel: false) {			
+			state 'z11off', label: '11', action: 'z11on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z11on', label: '11', action: 'z11off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch12', 'device.switch12', inactiveLabel: false) {            
+            state 'z12off', label: '12', action: 'z12on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z12on', label: '12', action: 'z12off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch13', 'device.switch13', inactiveLabel: false) {            
+            state 'z13off', label: '13', action: 'z13on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z13on', label: '13', action: 'z13off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+		standardTile('switch14', 'device.switch14', inactiveLabel: false) {            
+            state 'z14off', label: '14', action: 'z14on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z14on', label: '14', action: 'z14off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}
+        standardTile('switch15', 'device.switch15', inactiveLabel: false) {            
+            state 'z15off', label: '15', action: 'z15on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z15on', label: '15', action: 'z15off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}		
+        standardTile('switch16', 'device.switch16', inactiveLabel: false) {            
+            state 'z16off',  label: '16', action: 'z16on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state 'z16on',  label: '16', action: 'z16off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+		}        
+        standardTile('refresh', 'device.switch', inactiveLabel: false, decoration: 'flat') {
+			state 'default', action: 'refresh', icon:'st.secondary.refresh'//-icon'            
+		}
+        standardTile('configure', 'device.configure', inactiveLabel: false, decoration: 'flat') {
+			state 'configure', label:'', action:'configuration.configure', icon:'http://www.plaidsystems.com/smartthings/st_syncsettings.png'//sync_icon_small.png'
+		}        
+		
+        main (['switchall'])        
+        details(['switchall','minutes','rainsensor','switch1','switch2','switch3','switch4','switch','switch5','switch6','switch7','switch8','switch9','switch10','switch11','switch12','refresh','configure','switch13','switch14','switch15','switch16'])		
    }       
 }

+//used for schedule 
 def programOn(){
-    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Program turned on')    
+    }
+
+def programWait(){    
+    sendEvent(name: 'switch', value: 'programWait', descriptionText: "Initializing Schedule")
+    }
+
+def programEnd(){
+	//sets switch to off and tells schedule switch is off/schedule complete with manaual
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program manually turned off')
+    zoff() 
    }
    
 def programOff(){    
-    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program turned off')
    off()
    }

-def updated(){
-	log.debug "updated"    
+//set minutes
+def levelUp(){
+	def newvalue = 1
+    if (device.latestValue('minutes') != null) newvalue = device.latestValue('minutes').toInteger()+1
+    if (newvalue >= 60) newvalue = 60
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)    
+}
+
+def levelDown(){
+	def newvalue = device.latestValue('minutes').toInteger()-1
+    if (newvalue <= 0) newvalue = 1
+    def value = newvalue.toString()    
+    log.debug value
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
 }

 // Parse incoming device messages to generate events
 def parse(String description) {	
-	//log.debug "Parse description $description"
+	log.debug "Parse description ${description}"
    def result = null
    def map = [:]
-	if (description?.startsWith("read attr -")) {
+	if (description?.startsWith('read attr -')) {
 		def descMap = parseDescriptionAsMap(description)
 		//log.debug "Desc Map: $descMap"
        //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
-		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
-			log.debug "Zone"
+		if (descMap.cluster == '000F' && descMap.attrId == '0055') {
+			log.debug 'Zone'
            map = getZone(descMap)            
 		}
-        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
-			log.debug "Alarm"            
+        else if (descMap.cluster == '0009' && descMap.attrId == '0000') {
+			log.debug 'Alarm'
            map = getAlarm(descMap)
            }
 	}
+    else if (description?.startsWith('catchall: 0104 0009')){
+    	log.debug 'Sync settings to controller complete'
+        if (device.latestValue('status') != 'alarm'){
+        	def configEvt = createEvent(name: 'status', value: 'schedule', descriptionText: "Sync settings to controller complete")
+            def configMsg = createEvent(name: 'tileMessage', value: 'Sync settings to controller complete', descriptionText: "Sync settings to controller complete", displayed: false)
+        	result = [configEvt, configMsg]
+            }
+        return result
+    }
  
    if (map) {
    	result = createEvent(map)
+    	//configure after reboot
+        if (map.value == 'warning' || map.value == 'alarm'){
+            def cmds = config()       
+            def alarmEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) } + createEvent(map) + alarmEvt           
+			return result
 		}
-	log.debug "Parse returned $map $result"
+        else if (map.name == 'rainsensor'){
+        	def rainEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
+        	result = [createEvent(map), rainEvt]
+            return result
+        }
+	}
+	if (map) log.debug "Parse returned ${map} ${result}"
 	return result
 }

 def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
+	(description - 'read attr - ').split(',').inject([:]) { map, param ->
+		def nameAndValue = param.split(':')
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 }
@@ -270,27 +351,28 @@ def getZone(descMap){
    def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
    
    String onoff
-    if(descMap.value == "00"){
-    	onoff = "off"        
+    if(descMap.value == '00'){
+    	onoff = 'off'        
    }    
-    else onoff = "on"
+    else onoff = 'on'
            
    if (EP == 1){
-    	map.name = "switch"
+    	map.name = 'switch'
        map.value = onoff
-        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
+        map.descriptionText = "${device.displayName} turned sprinkler program ${onoff}"
        }
        
    else if (EP == 18) {
-        map.name = "rainsensor"
-    	map.value = "rainSensor" + onoff
-        map.descriptionText = "${device.displayName} rain sensor is $onoff"
+        map.name = 'rainsensor'
+    	log.debug "Rain enable: ${RainEnable}, sensor: ${onoff}"
+        map.value = 'rainSensor' + onoff
+        map.descriptionText = "${device.displayName} rain sensor is ${onoff}"
        }
   	else {
        EP -= 1
-        map.name = "switch" + EP
-    	map.value = "z" + EP + onoff
-    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
+        map.name = 'switch' + EP
+    	map.value = 'z' + EP + onoff
+    	map.descriptionText = "${device.displayName} turned Zone $EP ${onoff}"
    	}
        
    map.isStateChange = true 
@@ -300,36 +382,58 @@ def getZone(descMap){

 def getAlarm(descMap){
 	def map = [:]
-    map.name = "status"
+    map.name = 'status'
    def alarmID = Integer.parseInt(descMap.value.trim(), 16)
    log.debug "${alarmID}"
-    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
-    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
-	map.value = "alarm"
-    map.isStateChange = true
+    map.value = 'alarm'
    map.displayed = true
+    map.isStateChange = true
+    if(alarmID <= 0){
+    	map.descriptionText = "${device.displayName} reboot, no other alarms"
+        map.value = 'warning'
+        //map.isStateChange = false
+        }
+    else map.descriptionText = "${device.displayName} reboot, reported zone ${alarmID - 1} error, please check zone is working correctly, press SYNC SETTINGS button to clear"
+       
    return map        
 }

 //status notify and change status
-def notify(value, text){	
-	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
+def notify(String val, String txt){
+	sendEvent(name: 'status', value: val, descriptionText: txt, isStateChange: true, display: false)
+    
+    //String txtShort = txt.take(100)
+    sendEvent(name: 'tileMessage', value: txt, descriptionText: "", isStateChange: true, display: false)
+}
+
+def updated(){
+	log.debug "updated"
    
 }

 //prefrences - rain sensor, manual time
 def rain() {
-    log.debug "Rain $RainEnable"
+    log.debug "Rain sensor: ${RainEnable}"
+    if (RainEnable) sendEvent(name: 'rainsensor', value: 'enable', descriptionText: "${device.displayName} rain sensor is enabled", isStateChange: true)
+    else sendEvent(name: 'rainsensor', value: 'disable', descriptionText: "${device.displayName} rain sensor is disabled", isStateChange: true)
+    
    if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
    else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
 }
-def manual(){
-	log.debug "Time $ManualTime"
-    def mTime = 10
-    if (ManualTime) mTime = ManualTime
-    def manualTime = hex(mTime)
-    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"

+def manualTime(value){	
+	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
+}
+
+def manual(){    
+    def newManaul = 10    
+    if (device.latestValue('minutes')) newManaul = device.latestValue('minutes').toInteger()    
+    log.debug "Manual Zone runtime ${newManaul} mins"    
+    def manualTime = hex(newManaul)  
+    
+    def sendCmds = []
+    sendCmds.push("st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}")
+    return sendCmds
 }

 //write switch time settings map
@@ -367,9 +471,16 @@ def writeTime(wEP, runTime){
 //set reporting and binding
 def configure() {
 	
+    sendEvent(name: 'status', value: 'schedule', descriptionText: "Syncing settings to controller")
+    sendEvent(name: 'minutes', value: "10", descriptionText: "Manual Time set to 10 mins", display: false)
+    sendEvent(name: 'tileMessage', value: 'Syncing settings to controller', descriptionText: 'Syncing settings to controller')
+    config()    
+}
+
+def config(){
+
 	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
-	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+	log.debug "Configuring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
    
    def configCmds = [	
        //program on/off        
@@ -458,36 +569,14 @@ def configure() {
        "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + rain() + manual()
-}
-
-
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+    return configCmds + rain()
 }

 def refresh() {

-	log.debug "refresh"
+	log.debug "refresh pressed"
+    sendEvent(name: 'tileMessage', value: 'Refresh', descriptionText: 'Refresh')
+        
    def refreshCmds = [	    
        
        "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
@@ -513,64 +602,96 @@ def refresh() {
        "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
 	
    ]
-    return refreshCmds + rain() + manual()
+    
+    return refreshCmds
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+//on & off redefined for Alexa to start manual schedule
+def on() {    
+    log.debug 'Alexa on'
+    //schedule subscribes to programOn
+    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Alexa turned program on')           
+}
+def off() {
+	log.debug 'Alexa off'
+    sendEvent(name: 'switch', value: 'off', descriptionText: 'Alexa turned program off')
+    zoff()        
 }

 // Commands to device
 //zones on - 8
-def on() {
-    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
-    log.debug "on"
+def zon() {
 	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
-def off() {
-    log.debug "off"
+def zoff() {
 	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}" 
 }
 def z1on() {	
-    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
+    return manual() + "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"    
 }
 def z1off() {    
    "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
 }
 def z2on() {	
-    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
 }
 def z2off() {    
    "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
 }
 def z3on() {        
-    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
 }
 def z3off() {	
    "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
 }
 def z4on() {	
-    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
 }
 def z4off() {    
    "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
 }
 def z5on() {	
-	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
 }
 def z5off() {
 	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
 }
 def z6on() {
-	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
 }
 def z6off() {
    "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
 }
 def z7on() {
-	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
 }
 def z7off() {
 	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
 }
 def z8on() {
-	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
 }
 def z8off() {
 	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
@@ -578,50 +699,51 @@ def z8off() {

 //zones 9 - 16
 def z9on() {	
-    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
 }
 def z9off() {	    
    "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
 }
 def z10on() {	
-    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
 }
 def z10off() {    
    "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
 }
 def z11on() {        
-    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
 }
 def z11off() {	
    "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
 }
 def z12on() {	
-    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+    return manual() + "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
 }
 def z12off() {    
    "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
 }
 def z13on() {	
-	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+	return manual() + "st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
 }
 def z13off() {
 	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
 }
 def z14on() {
-	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+	return manual() + "st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
 }
 def z14off() {
    "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
 }
 def z15on() {
-	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+	return manual() + "st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
 }
 def z15off() {
 	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
 }
 def z16on() {
-	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+	return manual() + "st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
 }
 def z16off() {
 	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
 }
+
@@ -103,7 +103,7 @@ metadata {
 		}

 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}

 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -100,6 +100,11 @@ metadata {
 	}
 }

+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
@@ -278,4 +283,3 @@ private secure(physicalgraph.zwave.Command cmd) {
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
 }
-
@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -58,6 +58,11 @@ metadata {
 }
 }

+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,50 @@
+# Arrival Sensor HA (2016+ Model)
+
+Cloud Execution
+
+Works with:
+
+* [Samsung SmartThings Arrival Sensor](https://support.smartthings.com/hc/en-us/articles/212417083-Samsung-SmartThings-Arrival-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Sends broadcast of battery level every 20 seconds.
+Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)
@@ -1,5 +1,7 @@
+import groovy.json.JsonOutput
+
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -19,6 +21,7 @@ metadata {
        capability "Sensor"
        capability "Battery"
        capability "Configuration"
+        capability "Health Check"

        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
@@ -58,8 +61,13 @@ def updated() {
    startTimer()
 }

+def installed() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
    log.debug "configure -- cmds: ${cmds}"
    return cmds
 }
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,49 @@
+# Arrival Sensor (2015 Model)
+
+Cloud Execution
+
+Works with:
+
+* [Arrival Sensor](https://www.smartthings.com/products/samsung-smartthings-arrival-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Signal Strength** - device can read the strength of signal- lqi: Link Quality Indication, rssi: Received Signal Strength Indication
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)
@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
 *  Copyright 2015 SmartThings
 *
@@ -19,6 +21,7 @@ metadata {
 		capability "Presence Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"

 		fingerprint profileId: "FC01", deviceId: "019A"
 		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
@@ -111,6 +114,11 @@ def beep() {
 	]
 }

+def installed() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def parse(String description) {
 	def results
 	if (isBatteryMessage(description)) {
@@ -28,6 +28,8 @@ metadata {
        capability "Refresh"
        capability "Music Player"
        capability "Health Check"
+        capability "Sensor"
+        capability "Actuator"

        /**
         * Define all commands, ie, if you have a custom action not
@@ -15,7 +15,7 @@
 */

 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Configuration"
@@ -12,7 +12,7 @@
 *
 */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"
@@ -84,6 +84,11 @@ metadata {
 	}
 }

+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
@@ -32,7 +32,7 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"

-		attribute "thermostatSetpoint", "number"
+		attribute "displayThermostatSetpoint", "string" // Added to be able to show "Auto"/"Off" keeping attribute thermostatSetpoint a number
 		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
@@ -43,8 +43,8 @@ metadata {
 	}

 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
+		standardTile("temperature", "device.temperature", width: 2, height: 2, decoration: "flat") {
+			state("temperature", label:'${currentValue}°', unit:"F", icon: "st.thermostat.ac.air-conditioning",
 					backgroundColors:[
 							// Celsius
 							[value: 0, color: "#153591"],
@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -81,8 +81,8 @@ metadata {
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("displayThermostatSetpoint", "device.displayThermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "displayThermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
@@ -113,7 +113,7 @@ metadata {
 			state "humidity", label:'${currentValue}%'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "displayThermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}

 	preferences {
@@ -185,6 +185,11 @@ def generateEvent(Map results) {
 				isChange = isStateChange(device, name, value.toString())
 				event['isStateChange'] = isChange
 				event['displayed'] = false
+			} else if (name == "thermostatMode") {
+				def mode = value.toString()
+				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				isChange = isStateChange(device, name, mode)
+				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -452,10 +457,10 @@ def emergencyHeat() {
 }

 def auxHeatOnly() {
-	log.debug "auxHeatOnly"
+	log.debug "auxHeatOnly = emergency heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxHeatOnly")
+		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -574,17 +579,23 @@ def generateSetpointEvent() {
 	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)

+	def averageSetpoint = roundC((heatingSetpoint + coolingSetpoint) / 2)
 	if (mode == "heat") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 	else if (mode == "cool") {
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale, displayed: false)
 	} else if (mode == "auto") {
-		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Auto", displayed: false)
 	} else if (mode == "off") {
-		sendEvent("name":"thermostatSetpoint", "value":"Off")
-	} else if (mode == "auxHeatOnly") {
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 }

@@ -621,13 +632,14 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5

-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
 		}

 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"

 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -666,13 +678,14 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5

-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
 		}

 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"

 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -706,7 +719,7 @@ void alterSetpoint(temp) {
 		}

 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
+		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -735,15 +748,18 @@ void alterSetpoint(temp) {

 		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "displayThermostatSetpoint", "value": temp.value, displayed: false)
 			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
 			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
+			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			}
 		}

@@ -759,6 +775,7 @@ def generateStatusEvent() {
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
 	def statusText
+	def operatingState = "idle"

 	log.debug "Generate Status Event for Mode = ${mode}"
 	log.debug "Temperature = ${temperature}"
@@ -767,20 +784,29 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"

 	if (mode == "heat") {
-		if (temperature >= heatingSetpoint)
+		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+			operatingState = "heating"
+		}
 	} else if (mode == "cool") {
-		if (temperature <= coolingSetpoint)
+		if (temperature <= coolingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
+			operatingState = "cooling"
+		}
 	} else if (mode == "auto") {
 		statusText = "Right Now: Auto"
+		if (temperature < heatingSetpoint) {
+			operatingState = "heating"
+		} else if (temperature > coolingSetpoint) {
+			operatingState = "cooling"
+		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
@@ -788,6 +814,7 @@ def generateStatusEvent() {

 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
+	sendEvent("name":"thermostatOperatingState", "value":operatingState, "description":operatingState, displayed: false)
 }

 def generateActivityFeedsEvent(notificationMessage) {
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,43 @@
+# EcoNet Vent
+
+Cloud Execution
+
+Works with: 
+
+* [EcoNet Controls Z-Wave Vent](https://www.smartthings.com/works-with-smartthings/econet-controls/econet-controls-z-wave-vent)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - allows for the control of the level attribute of a light
+* **Actuator** - represents that a Device has commands
+* **Switch** - allows for the control of a switch device
+* **Battery** - defines that the device has a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Polling** - allows for the polling of devices that support it
+* **Configuration** - allow configuration of devices that support it
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+EcoNet Controls Z-Wave Vent is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [EcoNet Controls Z-Wave Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204556420-EcoNet-EV100-Vent)
@@ -26,11 +26,13 @@ metadata {
 		capability "Sensor"
        capability "Polling"
        capability "Configuration"
+		capability "Health Check"

 		command "open"
 		command "close"

 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
+		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}

 	simulator {
@@ -83,8 +85,15 @@ def parse(String description) {
    result
 }

+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }

@@ -169,6 +178,13 @@ def setLevel(value, duration) {
 	setLevel(value)
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,40 @@
+# Everspring Flood Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Everspring Water Detector](https://www.smartthings.com/works-with-smartthings/sensors/everspring-water-detector)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Everspring Water Detector is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+Three AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Everspring Water Detector Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088304-Everspring-Water-Detector)
@@ -12,11 +12,12 @@
 *
 */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"

 		fingerprint deviceId: "0xA102", inClusters: "0x86,0x72,0x85,0x84,0x80,0x70,0x9C,0x20,0x71"
 	}
@@ -138,6 +139,8 @@ def zwaveEvent(physicalgraph.zwave.Command cmd)

 def configure()
 {
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	if (!device.currentState("battery")) {
 		sendEvent(name: "battery", value:100, unit:"%", descriptionText:"(Default battery event)", displayed:false)
 	}
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,40 @@
+# Fibaro Door Window Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)
@@ -40,6 +40,7 @@
 		capability 	"Sensor"
 		capability 	"Battery"
 		capability 	"Configuration"
+		capability  "Health Check"
        
        command		"resetParams2StDefaults"
        command		"listCurrentParams"
@@ -67,8 +68,8 @@

 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -85,7 +86,7 @@
 		}
        standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -266,6 +267,9 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 */
 def configure() {
 	log.debug "Configuring Device..."
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	def cmds = []
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], parameterNumber: 1, size: 2).format()
 	// send associate to group 3 to get sensor data reported only to hub
@@ -38,7 +38,7 @@
 * @return none
 */
 metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -436,4 +436,3 @@ def listCurrentParams() {

 	delayBetween(cmds, 500)
 }
-
@@ -50,6 +50,11 @@ metadata {
 	}
 }

+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
@@ -42,7 +42,7 @@
 */

 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Configuration"
@@ -57,10 +57,20 @@ metadata {
 	}
 }

-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }

+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -45,10 +45,20 @@ metadata {
 	}
 }

-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }

+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -66,10 +66,20 @@ metadata {
 	}
 }

-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }

+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -50,10 +50,19 @@ metadata {
    }
 }

-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }

+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -55,10 +55,20 @@ metadata {
    }
 }

-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }

+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
    log.debug "parse() - $description"
@@ -5,7 +5,7 @@
 *
 */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }

+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }

 // handle commands
@@ -5,7 +5,7 @@
 *
 */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }

+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }

 // handle commands
@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
 *  Logitech Harmony Hub
 *
@@ -7,6 +8,7 @@ metadata {
 	definition (name: "Logitech Harmony Hub C2C", namespace: "smartthings", author: "SmartThings") {
 		capability "Media Controller"
        capability "Refresh"
+		capability "Health Check"
        
        command "activityoff"   
        command "alloff" 
@@ -38,6 +40,20 @@ metadata {
 	}
 }

+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
+def installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 def startActivity(String activityId) {
 	log.debug "Executing 'Start Activity'"
 	log.trace parent.activity("$device.deviceNetworkId-$activityId","start")    
@@ -58,6 +74,10 @@ def poll() {
 	log.trace parent.poll()
 }

+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "Executing 'Refresh'"
 	log.trace parent.poll()
@@ -62,8 +62,8 @@ metadata {
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
        }
        standardTile("contact", "device.contact", inactiveLabel: false) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
@@ -12,7 +12,7 @@
 *
 */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"

@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,35 @@
+# Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Relative Humidity Measurement** - allows reading the relative humidity from devices that support it
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)
@@ -21,8 +21,10 @@ metadata {
 		capability "Relative Humidity Measurement"
 		capability "Battery"
 		capability "Sensor"
+		capability "Health Check"

 		fingerprint profileId: "0104", inClusters: "0000,0003,0405,FC08", outClusters: "0003"
+		fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0B04", outClusters: "0003", manufacturer: "", model: "", deviceJoinName: "OSO Technologies PlantLink Soil Moisture Sensor"
 	}

 	tiles {
@@ -48,6 +50,11 @@ metadata {
 	}
 }

+def updated() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description) {
 	log.debug "Parse description $description"
@@ -17,7 +17,7 @@
 */

 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -1,10 +1,10 @@
-# Z-wave Siren
+# Smartalert Siren

 Cloud Execution

 Works with:

-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/products/fortrezz-siren-strobe-alarm)

 ## Table of contents

@@ -15,13 +15,10 @@ Works with:
 ## Capabilities

 * **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
 * **Switch** - can detect state (possible values: on/off)
+* **Sensor** - detects sensor events
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Health Check** - indicates ability to get device health notifications

 ## Device Health

@@ -16,15 +16,17 @@
 *  Date: 2013-03-05
 */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
 		capability "Alarm"
+		capability "Health Check"

 		command "test"

 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}

 	simulator {
@@ -68,6 +70,16 @@ metadata {
 	}
 }

+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def on() {
 	[
 		zwave.basicV1.basicSet(value: 0xFF).format(),
@@ -149,3 +161,10 @@ def createEvents(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.warn "UNEXPECTED COMMAND: $cmd"
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}
@@ -16,7 +16,7 @@
 *	Date: 2013-12-04
 */
 metadata {
-	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Dimming Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Power Meter"
@@ -44,9 +44,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -15,7 +15,7 @@
 */
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -56,8 +56,8 @@ metadata {
 			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
 		}
 		standardTile("contact", "device.contact") {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,36 @@
+# Smartsense Moisture
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Moisture Sensor](https://www.smartthings.com/works-with-smartthings/fortrezz/fortrezz-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Temperature Measurement** - represents capability to measure temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Smartsense Moisture is a Z-wave sleepy device type and checks in every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [FortrezZ Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200930740-FortrezZ-Moisture-Sensor)
@@ -17,9 +17,11 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
        capability "Temperature Measurement"
+		capability "Health Check"

 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
+		fingerprint mfr:"0084", prod:"0063", model:"010C", deviceJoinName: "FortrezZ Moisture Sensor"
 	}

 	simulator {
@@ -89,6 +91,16 @@ def parse(String description) {
 	return result
 }

+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 {
 	[descriptionText: "${device.displayName} woke up", isStateChange: false]
@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"

 		attribute "status", "string"
@@ -192,6 +191,10 @@ private List<Map> parseAxis(List<Map> attrData) {
 	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
 	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)

+	if ([x, y ,z].any { it == null }) {
+		return []
+	}
+
 	def xyzResults = [:]
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
@@ -372,6 +375,10 @@ def updated() {
 }

 private hexToSignedInt(hexVal) {
+	if (!hexVal) {
+		return null
+	}
+
 	def unsignedVal = hexToInt(hexVal)
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }
@@ -52,7 +52,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"##e86d13"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
 				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
 			}
 		}
@@ -31,6 +31,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 	}

 	simulator {
@@ -135,10 +135,7 @@ def refresh() {
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
 			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
 			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 }

 def configure() {
@@ -150,5 +147,10 @@ def configure() {

 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() +
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0x104E]) +   // New firmware
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300)
+
 }
@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH

 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"
@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}
@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}
@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#e86d13")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}
@@ -27,7 +27,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 		}
@@ -35,7 +35,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
@@ -59,7 +59,7 @@ metadata {
 			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "VALUE_CONTROL") {
@@ -23,6 +23,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"

 		command "enrollResponse"

@@ -20,6 +20,7 @@ metadata {
 	definition(name: "Wattvision", namespace: "smartthings", author: "Steve Vlaminck") {
 		capability "Power Meter"
 		capability "Refresh"
+		capability "Sensor"
 		attribute "powerContent", "string"
 	}

@@ -18,7 +18,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH

 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

    	capability "Actuator"
        capability "Configuration"
@@ -18,7 +18,7 @@


 metadata {
-	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Polling"
@@ -40,11 +40,11 @@ metadata {
    tiles(scale: 2) {
        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#cccccc"
 			}
            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
             	 attributeState "currentIP", label: ''
@@ -16,7 +16,7 @@
 * Date: 2015-10-11
 */
 metadata {
- 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
        capability "Actuator"
        capability "Switch"
        capability "Polling"
@@ -38,11 +38,11 @@
    tiles(scale: 2) {
        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
 			}
            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
             	 attributeState "currentIP", label: ''
@@ -50,11 +50,11 @@
        }

        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
        }

        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
@@ -28,6 +28,7 @@ metadata {
        command "enrollResponse"

        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,13 +252,20 @@ def initialize() {
    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
        sendEvent(name: "numberOfButtons", value: 2)
    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
+        if (device.getDataValue("model") == "3130") {
+            sendEvent(name: "numberOfButtons", value: 2)
+        }
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
            sendEvent(name: "numberOfButtons", value: 1)
        }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+        else if (device.getDataValue("model") == "3450-L") {
            sendEvent(name: "numberOfButtons", value: 4)
        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
+    }
    else {
        //default. can be changed
        sendEvent(name: "numberOfButtons", value: 4)
@@ -13,7 +13,7 @@
 */

 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
        capability "Actuator"
        capability "Configuration"
        capability "Refresh"
@@ -70,19 +70,27 @@ def parse(String description) {
        else {
            sendEvent(event)
        }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+            if (descMap.data[0] == "00") {
                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
+            } else {
                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
            }
+        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+            // This is being done because the sengled element touch incorrectly uses the value 0xFF for the max level.
+            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
+            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
+            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
+            // something else.
+            if (descMap.value.toUpperCase() == "FF") {
+                descMap.value = "FE"
            }
-        else {
+            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
+            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
+        } else {
            log.warn "DID NOT PARSE MESSAGE for description : $description"
            log.debug zigbee.parseDescriptionAsMap(description)
        }
@@ -114,9 +122,17 @@ def refresh() {

 def configure() {
    log.debug "Configuring Reporting and Bindings."
-
+    def cmds = []
+    if (device.getDataValue("manufacturer") == "sengled") {
+        def startLevel = 0xFE
+        if ((device.currentState("level")?.value != null)) {
+            startLevel = Math.round(Integer.parseInt(device.currentState("level").value) * 0xFE / 100)
+        }
+        // Level Control Cluster, command Move to Level, level start level, transition time 0
+        cmds << zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, sprintf("%02X0000", startLevel))
+    }
    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
    // enrolls with default periodic reporting until newer 5 min interval is confirmed
    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    cmds + refresh()
 }
@@ -13,7 +13,7 @@
 */

 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
        capability "Actuator"
        capability "Configuration"
        capability "Refresh"
@@ -25,6 +25,7 @@ metadata {

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,46 @@
+# Zigbee Lock
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Push Button Deadbolt (YRD210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-deadbolt-yrd210)
+* [Yale Touchscreen Lever (YRL220-ZB)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-lever-yrl220)
+* [Yale Touchscreen Deadbolt (YRD220-HA))](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-deadbolt-yrd220)
+* [Yale Key Free Touchscreen Deadbolt (YRD240-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-key-free-touchscreen-deadbolt-yrd240)
+* [Yale Push Button Lever Lock (YRL210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-lever-lock-yrl210)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Lock** - allows for the control of a lock device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Yale Push Button Deadbolt (YRD210-HA) is a Zigbee device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+ * __122min__ checkInterval
+
+## Battery Specification
+
+Four AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Yale Locks Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205138400)
@@ -24,6 +24,7 @@ import physicalgraph.zigbee.zcl.DataType
        capability "Sensor"
        capability "Battery"
        capability "Configuration"
+        capability "Health Check"

        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
@@ -83,6 +84,9 @@ def uninstalled() {
 }

 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
    def cmds =
        zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
                                  DataType.ENUM8, 0, 3600, null) +
@@ -92,6 +96,13 @@ def configure() {
    return refresh() + cmds // send refresh cmds as part of config
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE)
+}
+
 def refresh() {
    def cmds =
        zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,6 +64,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }

 // Parse incoming device messages to generate events
@@ -84,11 +85,11 @@ def parse(String description) {

 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -123,7 +124,12 @@ def ping() {
 }

 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig()
 }

 def configure() {
@@ -133,26 +139,38 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	refresh()
 }

 def setLevel(value) {
 	zigbee.setLevel(value)
 }

+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }

 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def installed() {
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -46,9 +46,9 @@ metadata {
    tiles(scale: 2) {
        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
            }
            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -78,6 +78,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }

@@ -102,11 +103,11 @@ def parse(String description) {

        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
            }
            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
            }
        }
@@ -141,7 +142,13 @@ def ping() {
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }

 def configure() {
@@ -156,7 +163,12 @@ def configure() {

 def setColorTemperature(value) {
    setGenericName(value)
-    zigbee.setColorTemperature(value)
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }

 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -180,19 +192,31 @@ def setLevel(value) {
    zigbee.setLevel(value)
 }

+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }

 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def installed() {
@@ -13,7 +13,7 @@
 */

 metadata {
-    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
        capability "Actuator"
        capability "Configuration"
        capability "Refresh"
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,35 @@
+# Leviton Switch (ZigBee)
+
+Cloud Execution
+
+Works with:
+
+* [Leviton Switch (ZigBee)](https://www.smartthings.com/works-with-smartthings/leviton/leviton-switch)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Zigbee Switch with reporting interval of 10 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __22min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209686003-How-to-connect-Leviton-ZigBee-devices)
@@ -13,11 +13,12 @@
 */

 metadata {
-    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
        capability "Actuator"
        capability "Configuration"
        capability "Refresh"
        capability "Switch"
+        capability "Health Check"

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
@@ -40,9 +41,9 @@ metadata {
    tiles(scale: 2) {
        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
            }
        }
@@ -75,11 +76,20 @@ def on() {
    zigbee.on()
 }

+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return refresh()
+}
+
 def refresh() {
    zigbee.onOffRefresh() + zigbee.onOffConfig()
 }

 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
    log.debug "Configuring Reporting and Bindings."
    zigbee.onOffRefresh() + zigbee.onOffConfig()
 }
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -45,9 +45,9 @@ metadata {
    tiles(scale: 2) {
        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
            }
            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -71,6 +71,11 @@ metadata {
    }
 }

+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
    log.debug "description is $description"
@@ -123,7 +128,11 @@ def ping() {
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }

 def configure() {
@@ -138,7 +147,12 @@ def configure() {

 def setColorTemperature(value) {
    setGenericName(value)
-    zigbee.setColorTemperature(value)
+	value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }

 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -16,7 +16,7 @@ import groovy.transform.Field
@Field Boolean hasConfiguredHealthCheck = false

 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Configuration"
@@ -49,9 +49,9 @@ metadata {
    tiles(scale: 2) {
        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
            }
            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType

 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

 		capability "Actuator"
 		capability "Color Control"
@@ -55,6 +55,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }

 // Parse incoming device messages to generate events
@@ -72,11 +73,11 @@ def parse(String description) {

 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -108,28 +109,46 @@ def configure() {
 }

 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() +
+	zigbee.levelConfig()
 }

 def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }

+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }

 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+	//payload-> sat value, transition time
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType

 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Color Control"
@@ -70,6 +70,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }

@@ -88,11 +89,11 @@ def parse(String description) {

        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                sendEvent(name: "hue", value: hueValue, displayed:false)
            }
            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                sendEvent(name: "saturation", value: saturationValue, displayed:false)
            }
        }
@@ -124,11 +125,16 @@ def configure() {
 }

 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }

 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setColorTemperature(value) {
@@ -139,17 +145,32 @@ def setLevel(value) {
    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }

+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }

 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -16,7 +16,7 @@ import groovy.transform.Field
@Field Boolean hasConfiguredHealthCheck = false

 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Color Temperature"
@@ -30,7 +30,7 @@ metadata {
        attribute "colorName", "string"
        command "setGenericName"

-        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_LT01", deviceJoinName: "Halo RL56 Wireless"
+        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_RL5601", deviceJoinName: "Halo RL56"
    }

    // UI tile definitions
@@ -66,6 +66,11 @@ metadata {
    }
 }

+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
    log.debug "description is $description"
@@ -99,7 +104,7 @@ def refresh() {

    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
    if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
    }

    cmds
@@ -138,7 +143,7 @@ def configure() {
    log.debug "configure()"
    configureHealthCheck()
    // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

 def updated() {
@@ -148,7 +153,12 @@ def updated() {

 def setColorTemperature(value) {
    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }

 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
@@ -16,7 +16,7 @@ import groovy.transform.Field
@Field Boolean hasConfiguredHealthCheck = false

 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {

        capability "Actuator"
        capability "Color Temperature"
@@ -68,6 +68,11 @@ metadata {
    }
 }

+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
    log.debug "description is $description"
@@ -94,7 +99,11 @@ def setLevel(value) {
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }

 def poll() {
@@ -129,8 +138,7 @@ def configureHealthCheck() {
 def configure() {
    log.debug "configure()"
    configureHealthCheck()
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
+    refresh()
 }

 def updated() {
@@ -140,7 +148,12 @@ def updated() {

 def setColorTemperature(value) {
    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }

 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -0,0 +1,41 @@
+/**
+ *  Zooz Power Strip Outlet
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip Outlet", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}
@@ -0,0 +1,217 @@
+/**
+ *  Zooz ZEN20 Power Strip Outlet
+ *
+ *  Implementation of the Zooz ZEN20 power strip that uses the new composite device capabilities to provide individual
+ *  control of each outlet from SmartApps as well as the mobile app. Incorporates contributions from:
+ *
+ *  Eric Maycock (https://github.com/erocm123/SmartThingsPublic/blob/master/devicetypes/erocm123/zooz-power-strip.src/zooz-power-strip.groovy)
+ *  Robert Vandervoort (https://github.com/robertvandervoort/SmartThings/blob/master/zooZ-Strip-ZEN20/device_type-zooZ-strip-ZEN20_v1.0)
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Zooz Power Strip", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Configuration"
+
+		fingerprint manufacturer: "015D", prod: "0651", model: "F51C", deviceJoinName: "Zooz ZEN 20 Power Strip"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		childDeviceTiles("outlets")
+		standardTile("refresh", "device.switch", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def installed() {
+	createChildDevices()
+}
+
+def updated() {
+	if (!childDevices) {
+		createChildDevices()
+	}
+	else if (device.label != state.oldLabel) {
+		childDevices.each {
+			def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+			it.setLabel(newLabel)
+		}
+		state.oldLabel = device.label
+	}
+}
+
+def configure() {
+	refresh()
+}
+
+
+//////////////////////
+// Event Generation //
+//////////////////////
+def parse(String description) {
+	trace "parse('$description')"
+	def result = []
+	if (description.startsWith("Err")) {
+		result = createEvent(descriptionText:description, isStateChange:true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x60: 3, 0x32: 3, 0x25: 1, 0x20: 1])
+		if (cmd) {
+			result += zwaveEvent(cmd, 1)
+		}
+		else {
+			log.warn "Unparsed description $description"
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd, ep) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, endpoint) {
+	trace "zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport $cmd, $endpoint)"
+	zwaveBinaryEvent(cmd, endpoint)
+}
+
+def zwaveBinaryEvent(cmd, endpoint) {
+	def result = []
+	def children = childDevices
+	def childDevice = children.find{it.deviceNetworkId.endsWith("$endpoint")}
+	if (childDevice) {
+		childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+
+		if (cmd.value) {
+			// One on and the strip is on
+			result << createEvent(name: "switch", value: "on")
+		} else {
+			// All off and the strip is off
+			if (!children.any { it.currentValue("switch") == "on" }) {
+				result << createEvent(name: "switch", value: "off")
+			}
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, ep) {
+	updateDataValue("MSR", String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId))
+	return null
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, ep) {
+	trace "applicationVersion $cmd.applicationVersion"
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd, ep) {
+	log.warn("${device.displayName}: Unhandled ${cmd}" + (ep ? " from endpoint $ep" : ""))
+}
+
+/////////////////////////////
+// Installation and update //
+/////////////////////////////
+def on() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+def off() {
+	def cmds = []
+	def cmd = zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00)
+	cmds << zwave.multiChannelV3.multiChannelCmdEncap(bitAddress: true, destinationEndPoint:0x1F).encapsulate(cmd).format()
+	cmds << "delay 400"
+	cmds.addAll(refresh())
+	return cmds
+}
+
+//////////////////////
+// Child Device API //
+//////////////////////
+void childOn(String dni) {
+	onOffCmd(0xFF, channelNumber(dni))
+}
+
+void childOff(String dni) {
+	onOffCmd(0, channelNumber(dni))
+}
+
+def refresh() {
+	def cmds = (1..5).collect { endpoint ->
+		encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)
+	}
+	delayBetween(cmds, 100)
+}
+
+///////////////////
+// Local Methods //
+///////////////////
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+
+private void onOffCmd(value, endpoint = null) {
+	def actions = [
+			new physicalgraph.device.HubAction(encap(zwave.basicV1.basicSet(value: value), endpoint)),
+			new physicalgraph.device.HubAction(encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint)),
+	]
+	sendHubCommand(actions, 500)
+}
+
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..5) {
+		addChildDevice("Zooz Power Strip Outlet", "${device.deviceNetworkId}-ep${i}", null,
+				[completedSetup: true, label: "${device.displayName} (CH${i})",
+				 isComponent: true, componentName: "ch$i", componentLabel: "Channel $i"])
+	}
+}
+
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:endpoint).encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private trace(msg) {
+	//log.trace(msg)
+}
--- a/Show More
+++ b/Show More