MSA-2078: Door sensor

Rolling down staging to master

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://artifactory.smartthings.com/libs-release-local"
+            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://artifactory.smartthings.com/libs-release-local"
+        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'smartthings:appengine-common:0.1.9'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'Hickory'
+            username = 'DEV'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'Dickory'
+            username = 'STG'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'Dock'
+            username = 'PRD'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -0,0 +1,268 @@
+/**
+ *
+ *  Inovelli 2-Channel Smart Plug
+ *
+ *  github: Eric Maycock (erocm123)
+ *  Date: 2017-04-27
+ *  Copyright Eric Maycock
+ *
+ *  Includes all configuration parameters and ease of advanced configuration.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Sensor"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Health Check"
+
+		fingerprint manufacturer: "015D", prod: "0221", model: "251C", deviceJoinName: "Show Home 2-Channel Smart Plug"
+		fingerprint manufacturer: "0312", prod: "B221", model: "251C", deviceJoinName: "Inovelli 2-Channel Smart Plug"
+	}
+	simulator {}
+	preferences {}
+	tiles {
+		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
+		}
+		main(["switch"])
+		details(["switch",
+				 childDeviceTiles("all"), "refresh"
+		])
+	}
+}
+def parse(String description) {
+	def result = []
+	def cmd = zwave.parse(description)
+	if (cmd) {
+		result += zwaveEvent(cmd)
+		logging("Parsed ${cmd} to ${result.inspect()}", 1)
+	} else {
+		logging("Non-parsed event: ${description}", 2)
+	}
+	return result
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
+	logging("BasicReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		childDevices.each {
+			childDevice ->
+				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
+					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+				}
+		}
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n ->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	logging("BasicSet ${cmd}", 2)
+	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+	def cmds = []
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	return [result, response(commands(cmds))] // returns the result of reponse()
+}
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
+	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		def childDevice = childDevices.find {
+			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
+		}
+		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	} else {
+		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+		def cmds = []
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+		return [result, response(commands(cmds))] // returns the result of reponse()
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	logging("MultiChannelCmdEncap ${cmd}", 2)
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	logging("ManufacturerSpecificReport ${cmd}", 2)
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	logging("msr: $msr", 2)
+	updateDataValue("MSR", msr)
+}
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// This will capture any commands not handled by other instances of zwaveEvent
+	// and is recommended for development so you can see every command the device sends
+	logging("Unhandled Event: ${cmd}", 2)
+}
+def on() {
+	logging("on()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOn(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+def off() {
+	logging("off()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOff(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+void childOn(String dni) {
+	logging("childOn($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childOff(String dni) {
+	logging("childOff($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childRefresh(String dni) {
+	logging("childRefresh($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+def poll() {
+	logging("poll()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def refresh() {
+	logging("refresh()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def ping() {
+	logging("ping()", 1)
+	refresh()
+}
+def installed() {
+	logging("installed()", 1)
+	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
+	createChildDevices()
+}
+def updated() {
+	logging("updated()", 1)
+	if (!childDevices) {
+		createChildDevices()
+	} else if (device.label != state.oldLabel) {
+		childDevices.each {
+			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
+				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+				it.setLabel(newLabel)
+			}
+		}
+		state.oldLabel = device.label
+	}
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
+}
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
+}
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
+	} else {
+		cmd
+	}
+}
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+private commands(commands, delay = 1000) {
+	delayBetween(commands.collect {
+		command(it)
+	}, delay)
+}
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..2) {
+		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
+																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
+		])
+	}
+}
+
+private def logging(message, level) {
+	if (logLevel != "0") {
+		switch (logLevel) {
+			case "1":
+				if (level > 1) log.debug "$message"
+				break
+			case "99":
+				log.debug "$message"
+				break
+		}
+	}
+}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -0,0 +1,49 @@
+/**
+ *  Switch Child Device
+ *
+ *  Copyright 2017 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Refresh"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}
+
+void refresh() {
+	parent.childRefresh(device.deviceNetworkId)
+}

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -0,0 +1,34 @@
+# Aeon Labs Key Fob
+
+Cloud Execution
+
+Works with:
+
+* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
+* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -131,6 +133,9 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -0,0 +1,33 @@
+# Aeon Minimote
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
+* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -18,6 +19,7 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -119,5 +121,7 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -22,8 +22,6 @@ metadata {
 		capability "Battery"
 		capability "Health Check"
 
-		command "configureAfterSecure"
-
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
@@ -91,12 +89,12 @@ metadata {
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configure", icon:"st.secondary.configure"
 		}
 
 		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery", "configure"])
 	}
 }
 
@@ -131,8 +129,8 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		log.debug("not sending wakeUpNoMoreInformation yet")
-        result += response(configureAfterSecure())
+		log.debug("not sending wakeUpNoMoreInformation yet: late configure")
+		result += response(configure())
 	} else {
 		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
@@ -150,11 +148,6 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 	}
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-    // log.debug "Received SecurityCommandsSupportedReport"
-	response(configureAfterSecure())
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -226,36 +219,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-def configureAfterSecure() {
-    // log.debug "configureAfterSecure()"
-
-    def request = [
-		// send temperature, humidity, and illuminance every 8 minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32),
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
-
-		// send battery every 20 hours
-		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1),
-		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60),
-
-		// send no-motion report 60 seconds after motion stops
-		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60),
-
-		// send binary sensor report instead of basic set for motion
-		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2),
-
-		// disable notification-style motion events
-		zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0),
-
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
-    ]
-	
-    setConfigured()
-	
-    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-}
-
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
@@ -265,7 +228,36 @@ def ping() {
 
 def configure() {
 	// log.debug "configure()"
-    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	def request = []
+	// send temperature, humidity, and illuminance every 8 minutes
+	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60)
+
+	// send battery every 20 hours
+	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60)
+
+	// send no-motion report 60 seconds after motion stops
+	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60)
+
+	// send binary sensor report instead of basic set for motion
+	request << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)
+
+	// Turn on the Multisensor Gen5 PIR sensor
+	request << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
+
+	// disable notification-style motion events
+	request << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
+
+	request << zwave.batteryV1.batteryGet()
+	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
+
+	setConfigured()
+
+	secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -0,0 +1,48 @@
+# Aeon Multisensor
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Aeon Labs MultiSensor is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Battery Specification
+
+Four AAA batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -93,6 +94,16 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -179,6 +190,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -61,6 +61,8 @@ metadata {
 def installed() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	response(secure(zwave.basicV1.basicGet()))
 }
 
 def updated() {
@@ -163,4 +165,4 @@ private secure(physicalgraph.zwave.Command cmd) {
  * */
 def ping() {
 	secure(zwave.basicV1.basicGet())
-}
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Bose SoundTouch
  *

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -108,11 +108,20 @@ def updated(){
     }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -179,6 +188,16 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
+			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -156,47 +156,49 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
-		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-			def isChange = false
-			def isDisplayed = true
+		def supportedThermostatModes = []
+		def thermostatMode = null
+
+		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
-				isChange = isTemperatureStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				if (value == true) {
+					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				}
+				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
+				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
 			}  else if (name=="humidity") {
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
+				event << [value: value.toString(), displayed: false, unit: "%"]
 			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
 				event['displayed'] = false
 			} else if (name == "thermostatMode") {
-				def mode = value.toString()
-				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
-				isChange = isStateChange(device, name, mode)
-				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
+				thermostatMode = value.toLowerCase()
+				return // as we don't want to send this event here, proceed to next name/value pair
 			} else {
-				isChange = isStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+				event << [value: value.toString()]
 			}
 			sendEvent(event)
 		}
+		if (state.supportedThermostatModes != supportedThermostatModes) {
+			state.supportedThermostatModes = supportedThermostatModes
+			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
+		}
+		if (thermostatMode) {
+			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
+					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
+		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -322,15 +324,7 @@ void resumeProgram() {
 }
 
 def modes() {
-	if (state.modes) {
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
-	else {
-		state.modes = parent.availableModes(this)
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
+	return state.supportedThermostatModes
 }
 
 def fanModes() {
@@ -413,11 +407,13 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
+	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
+	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -453,14 +449,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxHeatOnly()
+	auxheatonly()
 }
 
-def auxHeatOnly() {
-	log.debug "auxHeatOnly = emergency heat"
+def auxheatonly() {
+	log.debug "auxheatonly()"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
+		generateModeEvent("auxheatonly")
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -593,7 +589,7 @@ def generateSetpointEvent() {
 	} else if (mode == "off") {
 		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
+	} else if (mode == "auxheatonly") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
@@ -632,7 +628,7 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
@@ -678,7 +674,7 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
@@ -719,7 +715,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+		if (mode == "heat" || mode == "auxheatonly"){
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -754,7 +750,7 @@ void alterSetpoint(temp) {
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+			if (mode == "heat" || mode == "auxheatonly"){
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
@@ -783,7 +779,7 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat") {
+	if (mode == "heat" || mode == "auxheatonly") {
 		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
 		} else {
@@ -806,8 +802,6 @@ def generateStatusEvent() {
 		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
-		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
 	}

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,15 +300,21 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-	sendEvent(name: "hue", value: value.hue, displayed: false)
-	sendEvent(name: "saturation", value: value.saturation, displayed: false)
-	sendEvent(name: "color", value: value.hex, displayed: false)
-	if (value.level) {
-		sendEvent(name: "level", value: value.level)
-	}
-	if (value.switch) {
-		sendEvent(name: "switch", value: value.switch)
-	}
+    if(value.hue) {
+        sendEvent(name: "hue", value: value.hue, displayed: false)
+    }
+    if(value.saturation) {
+        sendEvent(name: "saturation", value: value.saturation, displayed: false)
+    }
+    if(value.hex?.trim()) {
+        sendEvent(name: "color", value: value.hex, displayed: false)
+    }
+    if (value.level) {
+        sendEvent(name: "level", value: value.level)
+    }
+    if (value.switch?.trim()) {
+        sendEvent(name: "switch", value: value.switch)
+    }
 
     sendRGB(value.rh, value.gh, value.bh)
 }

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -35,8 +35,8 @@ metadata {
 
 	// tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -48,14 +48,16 @@ metadata {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "valve"
-		details(["valve","refresh"])
+		main "contact"
+		details(["contact","refresh"])
 	}
 }
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	response(refresh())
 }
 
 def updated(){
@@ -85,11 +87,17 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def open() {
-	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
+	delayBetween([
+		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	], 500)
 }
 
 def close() {
-	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
+	delayBetween([
+		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	], 500)
 }
 
 /**
@@ -105,6 +113,6 @@ def refresh() {
 
 def createEventWithDebug(eventMap) {
 	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.descriptionText}"
+	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
 	return event
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bloom
  *

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bridge
  *

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bulb
  *

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Lux Bulb
  *

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue White Ambiance Bulb
  *

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -49,6 +49,6 @@ def arrived() {
 
 
 def departed() {
-	log.trace "Executing 'arrived'"
+	log.trace "Executing 'departed'"
 	sendEvent(name: "presence", value: "not present")
 }

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -293,4 +293,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -0,0 +1,43 @@
+# ZigBee Button
+
+Cloud Execution
+
+Works with: 
+
+* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Battery** - It defines that the device has a battery
+* **Button** - It defines that a device has one or more buttons
+* **Holdable Button** - It defines that a device has one or more holdable buttons
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - it represents that a Device has attributes.
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __722min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -24,6 +24,7 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
+        capability "Health Check"
 
         command "enrollResponse"
 
@@ -182,6 +183,13 @@ private Map parseNonIasButtonMessage(Map descMap){
     }
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    refresh()
+}
+
 def refresh() {
     log.debug "Refreshing Battery"
 
@@ -190,6 +198,8 @@ def refresh() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device (plus 2 mins lag time)
+    sendEvent(name: "checkInterval", value: 2 * 6 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting, IAS CIE, and Bindings."
     def cmds = []
     if (device.getDataValue("model") == "3450-L") {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -66,22 +66,29 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+            if (descMap.data[0] == "00") {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
+            } else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        }
-        else {
+        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+            // This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
+            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
+            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
+            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
+            // something else.
+            if (descMap.value.toUpperCase() == "FF") {
+                descMap.value = "FE"
+            }
+            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
+            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
+        } else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
+            log.debug "${descMap}"
         }
     }
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -103,12 +103,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+                state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                runIn(5, updateColor, [overwrite: true])
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+                state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                runIn(5, updateColor, [overwrite: true])
             }
         }
         else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
@@ -127,6 +127,11 @@ def parse(String description) {
     }
 }
 
+def updateColor() {
+	sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
+	sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
+}
+
 def on() {
     zigbee.on()
 }
@@ -204,9 +209,9 @@ def setColor(value){
     log.trace "setColor($value)"
     zigbee.on() +
     zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setHue(value) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -38,8 +38,8 @@ metadata {
     }
 
     tiles(scale: 2) {
-        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+        multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -58,8 +58,8 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["valve"])
-        details(["valve", "battery", "refresh"])
+        main(["contact"])
+        details(["contact", "battery", "refresh"])
     }
 }
 

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -88,11 +88,20 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -159,6 +168,16 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -113,9 +113,9 @@ def updated() {
 
 def configure() {
 	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
-	], 6000)
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW),
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+	], 1000)
 }
 
 def sensorValueEvent(value) {
@@ -190,11 +190,17 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
+
+	if (device.currentValue("contact") == null) { // Incase our initial request didn't make it
+		cmds << command(zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW))
+	}
+
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
-	} else {
+	} else { // If we check the battery state we will send NoMoreInfo in the handler for BatteryReport so that we definitely get the report
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
+
 	[event, response(cmds)]
 }
 

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -86,13 +86,13 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -152,6 +152,10 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
+
+	unschedule("followupStateCheck")
+	unschedule("stateCheck")
+
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
@@ -365,7 +369,7 @@ def zwaveEvent(UserCodeReport cmd) {
 			code = state["set$name"] ?: decrypt(state[name]) ?: "****"
 			state.remove("set$name".toString())
 		} else {
-			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
+			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
 			map.isStateChange = true
@@ -456,11 +460,12 @@ def zwaveEvent(physicalgraph.zwave.commands.timev1.TimeGet cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 	// The old Schlage locks use group 1 for basic control - we don't want that, so unsubscribe from group 1
 	def result = [ createEvent(name: "lock", value: cmd.value ? "unlocked" : "locked") ]
-	result << response(zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	if (state.assoc != zwaveHubNodeId) {
-		result << response(zwave.associationV1.associationGet(groupingIdentifier:2))
-	}
-	result
+	def cmds = [
+			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
+			"delay 1200",
+			zwave.associationV1.associationGet(groupingIdentifier:2).format()
+	]
+	[result, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
@@ -530,11 +535,18 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
 def ping() {
-	refresh()
+	runIn(30, followupStateCheck)
+	secure(zwave.doorLockV1.doorLockOperationGet())
+}
+
+def followupStateCheck() {
+	runEvery1Hour(stateCheck)
+	stateCheck()
+}
+
+def stateCheck() {
+	sendHubCommand(new physicalgraph.device.HubAction(secure(zwave.doorLockV1.doorLockOperationGet())))
 }
 
 def refresh() {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -85,11 +85,21 @@ metadata {
 	details(["switch", "power", "energy", "levelSliderControl", "refresh", "reset"])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 3,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+		0x32: 3,  // Meter
+	]
+}
+
 // parse events into attributes
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x32:3])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 	        log.debug("'$description' parsed to $result")
@@ -124,6 +134,21 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelR
 	dimmerEvents(cmd)
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
 def dimmerEvents(physicalgraph.zwave.Command cmd) {
 	def result = []
 	def value = (cmd.value ? "on" : "off")

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -89,10 +89,19 @@ def updated() {
 	} catch (e) { log.debug e }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x32: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x72: 2,  // ManufacturerSpecific
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if(description == "updated") return
-	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
@@ -157,6 +166,16 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	result
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.debug "$device.displayName: Unhandled: $cmd"
 	[:]

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2014-07-15
  */
 metadata {
-	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -71,9 +71,17 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -120,6 +128,15 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -89,9 +89,17 @@ def updated(){
     }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -138,6 +146,16 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -195,7 +195,10 @@ def registerDeviceChange() {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
-				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				// For now, we will only have one subscription endpoint per device
+				state.deviceSubscriptionMap.remove(deviceId)
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Bose SoundTouch (Connect)
  *

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Service Manager
  *
@@ -1083,7 +1085,6 @@ def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
 	updateInProgress()
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
 	return "Bulb is turning On"
 }
@@ -1092,7 +1093,6 @@ def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
 	updateInProgress()
-	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
 	return "Bulb is turning Off"
 }
@@ -1108,8 +1108,6 @@ def setLevel(childDevice, percent) {
 	else
 		level = Math.min(Math.round(percent * 254 / 100), 254)
 
-	createSwitchEvent(childDevice, level > 0, percent)
-
 	// For Zigbee lights, if level is set to 0 ST just turns them off without changing level
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
@@ -1128,7 +1126,6 @@ def setSaturation(childDevice, percent) {
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
@@ -1140,7 +1137,6 @@ def setHue(childDevice, percent) {
 	// 0 - 65535
 	def level = Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
@@ -1151,7 +1147,6 @@ def setColorTemperature(childDevice, huesettings) {
 	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000 / huesettings)
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $ct"
 }
@@ -1210,7 +1205,6 @@ def setColor(childDevice, huesettings) {
 	if (huesettings.switch == "off")
 		value.on = false
 
-	createSwitchEvent(childDevice, value.on ? "on" : "off")
 	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
@@ -1322,32 +1316,6 @@ private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }
 
-/**
- * Sends appropriate turningOn/turningOff state events depending on switch or level changes.
- *
- * @param childDevice device to send event for
- * @param setSwitch The new switch state, "on" or "off"
- * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- * 				  that should generate "off" instead of level change
- */
-private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
-
-	if (setLevel == null) {
-		setLevel = childDevice.device?.currentValue("level")
-	}
-	// Create on, off, turningOn or turningOff event as necessary
-	def currentState = childDevice.device?.currentValue("switch")
-	if ((currentState == "off" || currentState == "turningOff")) {
-		if (setSwitch == "on" || setLevel > 0) {
-			childDevice.sendEvent(name: "switch", value: "turningOn", displayed: false)
-		}
-	} else if ((currentState == "on" || currentState == "turningOn")) {
-		if (setSwitch == "off" || setLevel == 0) {
-			childDevice.sendEvent(name: "switch", value: "turningOff", displayed: false)
-		}
-	}
-}
-
 /**
  * Return the supported color range for different Hue lights. If model is not specified
  * it defaults to the smallest Gamut (B) to ensure that colors set on a mix of devices

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *