MSA-2038: testing the iot devices

Rolling down staging to master

devicetypes/drzwave/ezmultipli.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/drzwave/ezmultipli.src/README.md

@@ -0,0 +1,44 @@
+# Express Controls EZMultiPli
+
+Works with: 
+
+* [Express Controls EZMultiPli](https://www.smartthings.com/works-with-smartthings/)
+
+## Table of contents
+
+* [Release Notes](#release-notes)
+* [Capabilities](#capabilities)
+* [Troubleshooting](#troubleshooting)
+
+## Release Notes
+
+* **2017-04-19** - _dkirker_ - Update default config values in config value range check functions, use lux if lum option is null, fix NullPointerException on initial pairing when color data has not been set (and set the default color data!)
+* **2017-04-10** - _DrZwave_ (with help from Donald Kirker) - changed fingerprint to the new format, lowered the OnTime and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+* **2016-10-06** - _erocm1231_ - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+* **2016-01-28** - _erocm1231_ - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers. Also, added configurationGet and a configurationReport method so that config values can be verified.
+* **2015-12-04** - _erocm1231_ - added range value to preferences as suggested by @Dela-Rick.
+* **2015-11-26** - _erocm1231_ - Fixed null condition error when adding as a new device. 
+* **2015-11-24** - _erocm1231_ - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed the device not having its on/off status updated when colors are changed.
+* **2015-11-23** - _erocm1231_ - Changed the look to match SmartThings v2 devices. 
+* **2015-11-21** - _erocm1231_ - Made code much more efficient. Also made it compatible when setColor is passed a hex value. Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, Daylight - Energize - Teal, Warm White - Relax - Yellow
+* **2015-11-19** - _erocm1231_ - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+* **2015-11-18** - _erocm1231_ - Added to setColor for compatibility with Smart Lighting
+* **v0.1.0** - _DrZWave_ - chose better icons, Got color LED to work - first fully functional version
+* **v0.0.9** - _jrs_ - got the temp and luminance to work. Motion works. Debugging the color wheel.
+* **v0.0.8** - _DrZWave_ 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+* **v0.0.7** - _jrs_ - 02/23/2015 - Jim Sulin
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Sensor** - detects sensor events
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Switch** - can detect state (possible values: on/off)
+* **Color Control** - represents that the color attributes of a device can be controlled (hue, saturation, color value
+* **Configuration** - configure() command called when device is installed or device preferences updated
+* **Refresh** - refresh() command for status updates
+
+## Troubleshooting
+

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -0,0 +1,405 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Actuator"
+	capability "Sensor"
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    capability "Refresh"
+
+	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+	} //end simulator
+
+    
+    tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
+				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+				attributeState "statusText", label:'${currentValue}'
+			}
+        }
+
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#153591"], // blue=cold
+				[value: 65, color: "#44b621"], // green
+				[value: 70, color: "#44b621"], // green
+				[value: 75, color: "#f1d801"], // yellow
+				[value: 80, color: "#f1d801"], // yellow
+				[value: 85, color: "#f1d801"], // yellow
+				[value: 90, color: "#d04e00"], // red
+				[value: 95, color: "#bc2323"]  // red=hot
+			]
+		}
+
+        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+			//state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"],
+                //lux measurement values
+                [value: 150, color: "#404040"],
+				[value: 300, color: "#808080"],
+				[value: 600, color: "#a0a0a0"],
+				[value: 900, color: "#e0e0e0"]
+			]
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}    
+		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["temperature","motion", "switch"])
+		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
+	}  // end tiles
+    
+	preferences {
+       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
+       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
+       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
+       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
+          [1:"Percent",
+           2:"Lux"])
+  }
+
+} // end metadata
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	//log.debug "==> New Zwave Event: ${description}"
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		def cmdData = zwaveEvent(cmd)
+		if (cmdData != [:])
+			result << createEvent(cmdData)
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == 1) ? "%" : "LUX"}"
+    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
+	}
+    if (result != [null] && result != []) log.debug "Parse returned ${result}"
+    
+    
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+            if(lum == 1) map.unit = "%"
+            else map.unit = "lux"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    // The EZMultiPli sets the color back to #ffffff on "off" or at init, so update the ST device to reflect this.
+    if (device.latestState("color") == null || (cmd.value == 0 && device.latestState("color").value != "#ffffff")) {
+        sendEvent(name: "color", value: "#ffffff", displayed: true)
+    }
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def updated()
+{
+    log.debug "updated() is being called"
+    
+    def cmds = configure()
+    
+    if (cmds != []) response(cmds)
+}
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value}"
+    def myred
+    def mygreen
+    def myblue
+    def hexValue
+    def cmds = []
+
+    if ( value.level == 1 && value.saturation > 20) {
+		def rgb = huesatToRGB(value.hue as Integer, 100)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if ( value.level > 1 ) {
+		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if (value.hex) {
+		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    }
+    else {
+        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+        mygreen=value.green >=128 ? 255 : 0
+        myblue=value.blue>=128 ? 255 : 0
+    }
+    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
+  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+    // So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    cmds << zwave.basicV1.basicGet().format()
+    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
+    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=6
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 6			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=2
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 2			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+def refresh() {
+	def cmd = []
+    cmd << zwave.switchColorV3.switchColorGet().format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
+    cmd << zwave.basicV1.basicGet().format()
+    delayBetween(cmd, 1000)
+}
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
+	], 100)
+	//log.debug cmd
+	cmd + refresh()
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}
+def rgbToHex(rgb) {
+    def r = hex(rgb.r)
+    def g = hex(rgb.g)
+    def b = hex(rgb.b)
+    def hexColor = "#${r}${g}${b}"
+    
+    hexColor
+}
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -0,0 +1,268 @@
+/**
+ *
+ *  Inovelli 2-Channel Smart Plug
+ *
+ *  github: Eric Maycock (erocm123)
+ *  Date: 2017-04-27
+ *  Copyright Eric Maycock
+ *
+ *  Includes all configuration parameters and ease of advanced configuration.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Sensor"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Health Check"
+
+		fingerprint manufacturer: "015D", prod: "0221", model: "251C", deviceJoinName: "Show Home 2-Channel Smart Plug"
+		fingerprint manufacturer: "0312", prod: "B221", model: "251C", deviceJoinName: "Inovelli 2-Channel Smart Plug"
+	}
+	simulator {}
+	preferences {}
+	tiles {
+		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
+		}
+		main(["switch"])
+		details(["switch",
+				 childDeviceTiles("all"), "refresh"
+		])
+	}
+}
+def parse(String description) {
+	def result = []
+	def cmd = zwave.parse(description)
+	if (cmd) {
+		result += zwaveEvent(cmd)
+		logging("Parsed ${cmd} to ${result.inspect()}", 1)
+	} else {
+		logging("Non-parsed event: ${description}", 2)
+	}
+	return result
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
+	logging("BasicReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		childDevices.each {
+			childDevice ->
+				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
+					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+				}
+		}
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n ->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	logging("BasicSet ${cmd}", 2)
+	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+	def cmds = []
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	return [result, response(commands(cmds))] // returns the result of reponse()
+}
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
+	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		def childDevice = childDevices.find {
+			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
+		}
+		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	} else {
+		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+		def cmds = []
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+		return [result, response(commands(cmds))] // returns the result of reponse()
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	logging("MultiChannelCmdEncap ${cmd}", 2)
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	logging("ManufacturerSpecificReport ${cmd}", 2)
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	logging("msr: $msr", 2)
+	updateDataValue("MSR", msr)
+}
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// This will capture any commands not handled by other instances of zwaveEvent
+	// and is recommended for development so you can see every command the device sends
+	logging("Unhandled Event: ${cmd}", 2)
+}
+def on() {
+	logging("on()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOn(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+def off() {
+	logging("off()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOff(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+void childOn(String dni) {
+	logging("childOn($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childOff(String dni) {
+	logging("childOff($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childRefresh(String dni) {
+	logging("childRefresh($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+def poll() {
+	logging("poll()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def refresh() {
+	logging("refresh()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def ping() {
+	logging("ping()", 1)
+	refresh()
+}
+def installed() {
+	logging("installed()", 1)
+	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
+	createChildDevices()
+}
+def updated() {
+	logging("updated()", 1)
+	if (!childDevices) {
+		createChildDevices()
+	} else if (device.label != state.oldLabel) {
+		childDevices.each {
+			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
+				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+				it.setLabel(newLabel)
+			}
+		}
+		state.oldLabel = device.label
+	}
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
+}
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
+}
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
+	} else {
+		cmd
+	}
+}
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+private commands(commands, delay = 1000) {
+	delayBetween(commands.collect {
+		command(it)
+	}, delay)
+}
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..2) {
+		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
+																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
+		])
+	}
+}
+
+private def logging(message, level) {
+	if (logLevel != "0") {
+		switch (logLevel) {
+			case "1":
+				if (level > 1) log.debug "$message"
+				break
+			case "99":
+				log.debug "$message"
+				break
+		}
+	}
+}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -0,0 +1,49 @@
+/**
+ *  Switch Child Device
+ *
+ *  Copyright 2017 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Refresh"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}
+
+void refresh() {
+	parent.childRefresh(device.deviceNetworkId)
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -39,8 +39,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -37,8 +37,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -34,8 +34,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -95,12 +95,12 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
 			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 			} 
@@ -135,13 +135,13 @@ metadata {
     	}        
         
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
         
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
         
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
         
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
         

devicetypes/osotech/plantlink.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/osotech/plantlink.src/README.md

@@ -0,0 +1,33 @@
+# Osotech Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -24,6 +24,7 @@ import groovy.json.JsonBuilder
 metadata {
     definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
         capability "Sensor"
+        capability "Health Check"
 
         command "setStatusIcon"
         command "setPlantFuelLevel"
@@ -70,6 +71,16 @@ metadata {
     }
 }
 
+def updated() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def setStatusIcon(value){
     def status = ''
     switch (value) {
@@ -161,4 +172,4 @@ def parseDescriptionAsMap(description) {
         	map += []
         }
     }
-}
+}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Battery"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
+		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -130,5 +131,12 @@ def updated() {
 }
 
 def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
+	def zwMap = getZwaveInfo()
+	def buttons = 4 // Default for Key Fob
+
+	// Only one button for Aeon Panic Button
+	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
+		buttons = 1
+	}
+	sendEvent(name: "numberOfButtons", value: buttons)
 }

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -0,0 +1,43 @@
+# Aeon Multisensor 6
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs MultiSensor 6 is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -29,6 +30,7 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
+		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -103,7 +105,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -127,7 +129,14 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -326,6 +335,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
@@ -410,4 +426,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -22,8 +22,6 @@ metadata {
 		capability "Battery"
 		capability "Health Check"
 
-		command "configureAfterSecure"
-
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
@@ -86,17 +84,17 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configure", icon:"st.secondary.configure"
 		}
 
 		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery", "configure"])
 	}
 }
 
@@ -131,8 +129,8 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		log.debug("not sending wakeUpNoMoreInformation yet")
-        result += response(configureAfterSecure())
+		log.debug("not sending wakeUpNoMoreInformation yet: late configure")
+		result += response(configure())
 	} else {
 		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
@@ -150,11 +148,6 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 	}
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-    // log.debug "Received SecurityCommandsSupportedReport"
-	response(configureAfterSecure())
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -226,36 +219,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-def configureAfterSecure() {
-    // log.debug "configureAfterSecure()"
-
-    def request = [
-		// send temperature, humidity, and illuminance every 8 minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32),
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
-
-		// send battery every 20 hours
-		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1),
-		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60),
-
-		// send no-motion report 60 seconds after motion stops
-		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60),
-
-		// send binary sensor report instead of basic set for motion
-		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2),
-
-		// disable notification-style motion events
-		zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0),
-
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
-    ]
-	
-    setConfigured()
-	
-    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-}
-
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
@@ -265,7 +228,36 @@ def ping() {
 
 def configure() {
 	// log.debug "configure()"
-    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	def request = []
+	// send temperature, humidity, and illuminance every 8 minutes
+	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60)
+
+	// send battery every 20 hours
+	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60)
+
+	// send no-motion report 60 seconds after motion stops
+	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60)
+
+	// send binary sensor report instead of basic set for motion
+	request << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)
+
+	// Turn on the Multisensor Gen5 PIR sensor
+	request << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
+
+	// disable notification-style motion events
+	request << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
+
+	request << zwave.batteryV1.batteryGet()
+	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
+
+	setConfigured()
+
+	secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
 private setConfigured() {
@@ -282,5 +274,4 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
-
+}

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -0,0 +1,48 @@
+# Aeon Multisensor
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Aeon Labs MultiSensor is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Battery Specification
+
+Four AAA batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -79,7 +80,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -93,6 +94,16 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -179,6 +190,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
@@ -193,4 +211,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
@@ -61,6 +61,8 @@ metadata {
 def installed() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	response(secure(zwave.basicV1.basicGet()))
 }
 
 def updated() {
@@ -163,4 +165,4 @@ private secure(physicalgraph.zwave.Command cmd) {
  * */
 def ping() {
 	secure(zwave.basicV1.basicGet())
-}
+}

devicetypes/smartthings/arrival-sensor-ha.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor-ha.src/README.md

@@ -0,0 +1,50 @@
+# Arrival Sensor HA (2016+ Model)
+
+Cloud Execution
+
+Works with:
+
+* [Samsung SmartThings Arrival Sensor](https://support.smartthings.com/hc/en-us/articles/212417083-Samsung-SmartThings-Arrival-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Sends broadcast of battery level every 20 seconds.
+Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,5 +1,7 @@
+import groovy.json.JsonOutput
+
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -19,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
                         manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
@@ -58,8 +61,13 @@ def updated() {
     startTimer()
 }
 
+def installed() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }
@@ -166,4 +174,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/arrival-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor.src/README.md

@@ -0,0 +1,49 @@
+# Arrival Sensor (2015 Model)
+
+Cloud Execution
+
+Works with:
+
+* [Arrival Sensor](https://www.smartthings.com/products/samsung-smartthings-arrival-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Signal Strength** - device can read the strength of signal- lqi: Link Quality Indication, rssi: Received Signal Strength Indication
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +21,7 @@ metadata {
 		capability "Presence Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint profileId: "FC01", deviceId: "019A"
 		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
@@ -111,6 +114,11 @@ def beep() {
 	]
 }
 
+def installed() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def parse(String description) {
 	def results
 	if (isBatteryMessage(description)) {

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Bose SoundTouch
  *

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -9,6 +9,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -18,6 +19,7 @@ metadata {
 		command "quickSetHeat"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
+		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
 	// simulator metadata
@@ -106,6 +108,16 @@ metadata {
 	}
 }
 
+def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def result = []
@@ -439,6 +451,14 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"
@@ -23,9 +23,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer"
 		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 
@@ -108,11 +108,20 @@ def updated(){
     }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -179,6 +188,16 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -0,0 +1,163 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST815 Illuminance Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Illuminance Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0007", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 3:
+			// luminance
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			map.name = "illuminance"
+			break;
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report lux change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST814 Temperature/Humidity Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0006", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 1:
+			/* temperature */
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			break
+		case 5:
+			/* humidity */
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "humidity"
+			break
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	def result = null
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+	if (encapsulatedCommand) {
+		result = zwaveEvent(encapsulatedCommand)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report temperature change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
+
+		// Auto report humidity change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -68,8 +68,8 @@
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -86,7 +86,7 @@
 		}
         standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -107,8 +107,8 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
 		}
 
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,13 +12,13 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
-        
+
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
 		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
@@ -34,25 +34,30 @@ metadata {
 	}
 
 	// tile definitions
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
-		details(["contact","refresh"])
+		main "valve"
+		details(["valve","refresh"])
 	}
 }
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	response(refresh())
 }
 
 def updated(){
@@ -62,30 +67,37 @@ def updated(){
 
 def parse(String description) {
 	log.trace description
-	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
-	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
+	delayBetween([
+		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	], 500)
 }
 
 def close() {
-	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
+	delayBetween([
+		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	], 500)
 }
 
 /**
@@ -98,3 +110,9 @@ def ping() {
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
+	return event
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bloom
  *

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bridge
  *

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Bulb
  *

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Lux Bulb
  *

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue White Ambiance Bulb
  *

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -62,8 +62,8 @@ metadata {
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
         }
         standardTile("contact", "device.contact", inactiveLabel: false) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
         standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/plant-link.src/README.md

@@ -21,7 +21,7 @@ Works with:
 
 ## Device Health
 
-Plant Link sensor is a Z-wave sleepy device and checks in every 15 minutes.
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
 Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
 
 * __32min__ checkInterval

devicetypes/smartthings/smartalert-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartalert-siren.src/README.md

@@ -0,0 +1,39 @@
+# Smartalert Siren
+
+Cloud Execution
+
+Works with:
+
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/products/fortrezz-siren-strobe-alarm)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Switch** - can detect state (possible values: on/off)
+* **Sensor** - detects sensor events
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+FortrezZ Siren Strobe Alarm is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,15 +16,17 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
 		capability "Alarm"
+		capability "Health Check"
 
 		command "test"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -68,6 +70,16 @@ metadata {
 	}
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def on() {
 	[
 		zwave.basicV1.basicSet(value: 0xFF).format(),
@@ -149,3 +161,10 @@ def createEvents(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.warn "UNEXPECTED COMMAND: $cmd"
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -44,9 +44,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -56,8 +56,8 @@ metadata {
 			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
 		}
 		standardTile("contact", "device.contact") {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -61,8 +61,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#00A0DC"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
@@ -88,8 +87,8 @@ metadata {
 			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#00a0dc")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#cccccc")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label: '${currentValue}°',
@@ -179,7 +178,7 @@ private List<Map> handleAcceleration(descMap) {
 			result += parseAxis(descMap.additionalAttrs)
 		}
 	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
+		def addAttrs = descMap.additionalAttrs ?: []
 		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
 		result += parseAxis(addAttrs)
 	}
@@ -192,6 +191,10 @@ private List<Map> parseAxis(List<Map> attrData) {
 	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
 	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
 
+	if ([x, y ,z].any { it == null }) {
+		return []
+	}
+
 	def xyzResults = [:]
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
@@ -372,6 +375,10 @@ def updated() {
 }
 
 private hexToSignedInt(hexVal) {
+	if (!hexVal) {
+		return null
+	}
+
 	def unsignedVal = hexToInt(hexVal)
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -31,6 +31,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -49,6 +49,6 @@ def arrived() {
 
 
 def departed() {
-	log.trace "Executing 'arrived'"
+	log.trace "Executing 'departed'"
 	sendEvent(name: "presence", value: "not present")
 }

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -22,16 +22,16 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
 		}
 		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -25,8 +25,8 @@ metadata {
 
 	tiles(scale: 2) {
 		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#e86d13")
 		}
 		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
 		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -27,7 +27,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 		}
@@ -35,7 +35,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
@@ -59,7 +59,7 @@ metadata {
 			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "VALUE_CONTROL") {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -40,11 +42,11 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -46,8 +48,8 @@
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC")
       		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -38,11 +40,11 @@
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''
@@ -50,11 +52,11 @@
         }
 
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
         }
 
         standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -70,19 +70,27 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+            if (descMap.data[0] == "00") {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
+            } else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        }
-        else {
+        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+            // This is being done because the sengled element touch incorrectly uses the value 0xFF for the max level.
+            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
+            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
+            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
+            // something else.
+            if (descMap.value.toUpperCase() == "FF") {
+                descMap.value = "FE"
+            }
+            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
+            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
+        } else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
             log.debug zigbee.parseDescriptionAsMap(description)
         }
@@ -114,9 +122,17 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
+    def cmds = []
+    if (device.getDataValue("manufacturer") == "sengled") {
+        def startLevel = 0xFE
+        if ((device.currentState("level")?.value != null)) {
+            startLevel = Math.round(Integer.parseInt(device.currentState("level").value) * 0xFE / 100)
+        }
+        // Level Control Cluster, command Move to Level, level start level, transition time 0
+        cmds << zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, sprintf("%02X0000", startLevel))
+    }
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    cmds + refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -25,6 +25,7 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
@@ -65,22 +66,29 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+            if (descMap.data[0] == "00") {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
+            } else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        }
-        else {
+        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+            // This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
+            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
+            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
+            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
+            // something else.
+            if (descMap.value.toUpperCase() == "FF") {
+                descMap.value = "FE"
+            }
+            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
+            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
+        } else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
+            log.debug "${descMap}"
         }
     }
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,7 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,6 +64,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -84,11 +85,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -123,7 +124,12 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig()
 }
 
 def configure() {
@@ -133,26 +139,38 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	refresh()
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -161,4 +179,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -46,9 +46,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -78,6 +78,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -102,12 +103,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+                state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                runIn(5, updateColor, [overwrite: true])
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+                state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                runIn(5, updateColor, [overwrite: true])
             }
         }
         else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
@@ -126,6 +127,11 @@ def parse(String description) {
     }
 }
 
+def updateColor() {
+	sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
+	sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
+}
+
 def on() {
     zigbee.on()
 }
@@ -141,7 +147,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -156,7 +168,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -180,19 +197,31 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+    getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -201,4 +230,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,7 +27,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -41,9 +41,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -83,6 +83,9 @@ def parse(String description) {
             }
         }
         sendEvent(event)
+        //handle valve attribute
+        event.name = "valve"
+        sendEvent(event)
     }
     else {
         def descMap = zigbee.parseDescriptionAsMap(description)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -45,9 +45,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -71,6 +71,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -123,7 +128,11 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -138,7 +147,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+	value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -49,9 +49,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,6 +55,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -72,11 +73,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -108,28 +109,46 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() +
+	zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+	//payload-> sat value, transition time
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,6 +70,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -88,11 +89,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -124,11 +125,16 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -139,17 +145,32 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,6 +66,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -95,14 +100,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
     }
 
-	cmds
+    cmds
 }
 
 def poll() {
@@ -138,7 +143,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -148,7 +153,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,6 +68,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -94,7 +99,11 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def poll() {
@@ -129,8 +138,7 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
+    refresh()
 }
 
 def updated() {
@@ -140,7 +148,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -75,6 +75,10 @@ def parse(String description) {
 	return result
 }
 
+def uninstalled() {
+	sendEvent(name: "epEvent", value: "delete all", isStateChange: true, displayed: false, descriptionText: "Delete endpoint devices")
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	[ createEvent(descriptionText: "${device.displayName} woke up", isStateChange:true),
 	  response(["delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]) ]

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -88,11 +88,20 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -159,6 +168,16 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,6 +30,15 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"0086", prod:"0102", model:"0059", deviceJoinName: "Aeon Labs Recessed Door Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0003", deviceJoinName: "Ecolink Tilt Sensor"
+		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
+		fingerprint mfr:"014F", prod:"2001", model:"0102", deviceJoinName: "Nortek GoControl Door/Window Sensor"
+		fingerprint mfr:"0063", prod:"4953", model:"3031", deviceJoinName: "Jasco Hinge Pin Door Sensor"
+		fingerprint mfr:"019A", prod:"0003", model:"0003", deviceJoinName: "Sensative Strips"
+
 	}
 
 	// simulator metadata
@@ -104,9 +113,9 @@ def updated() {
 
 def configure() {
 	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
-	], 6000)
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW),
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+	], 1000)
 }
 
 def sensorValueEvent(value) {
@@ -181,11 +190,17 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
+
+	if (device.currentValue("contact") == null) { // Incase our initial request didn't make it
+		cmds << command(zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW))
+	}
+
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
-	} else {
+	} else { // If we check the battery state we will send NoMoreInfo in the handler for BatteryReport so that we definitely get the report
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
+
 	[event, response(cmds)]
 }
 

devicetypes/smartthings/zwave-lock.src/README.md

@@ -1,4 +1,4 @@
-# Z-Wave Switch
+# Z-Wave Lock
 
 Cloud Execution
 
@@ -6,7 +6,6 @@ Works with:
 
 * [Yale Key Free Touchscreen Deadbolt (YRD240)](https://www.smartthings.com/works-with-smartthings/yale/yale-key-free-touchscreen-deadbolt-yrd240)
 
-
 ## Table of contents
 
 * [Capabilities](#capabilities)
@@ -41,5 +40,3 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [General Z-Wave/ZigBee Yale Lock Troubleshooting](https://support.smartthings.com/hc/en-us/articles/205138400-How-to-connect-Yale-locks)
-
-

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -26,7 +26,24 @@ metadata {
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
-		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
+		fingerprint mfr:"0090", prod:"0001", model:"0236", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0238", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0001", deviceJoinName: "KwikSet SmartCode 910 Contemporary Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0339", deviceJoinName: "KwikSet SmartCode 912 Lever Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"4006", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock" //backlit version
+		fingerprint mfr:"0090", prod:"0003", model:"0440", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"0544", deviceJoinName: "Schlage Camelot Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"5044", deviceJoinName: "Schlage Century Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"634B", model:"504C", deviceJoinName: "Schlage Connected Keypad Lever Door Lock"
+		fingerprint mfr:"0129", prod:"0002", model:"0800", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD120
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD220, YRD240
+		fingerprint mfr:"0129", prod:"0002", model:"FFFF", deviceJoinName: "Yale Touchscreen Lever Door Lock" // YRD220
+		fingerprint mfr:"0129", prod:"0004", model:"0800", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD110
+		fingerprint mfr:"0129", prod:"0004", model:"0000", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"0001", model:"0000", deviceJoinName: "Yale Push Button Lever Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"8002", model:"0600", deviceJoinName: "Yale Assure Lock with Bluetooth"
 	}
 
 	simulator {
@@ -69,13 +86,13 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -135,6 +152,10 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
+
+	unschedule("followupStateCheck")
+	unschedule("stateCheck")
+
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
@@ -348,7 +369,7 @@ def zwaveEvent(UserCodeReport cmd) {
 			code = state["set$name"] ?: decrypt(state[name]) ?: "****"
 			state.remove("set$name".toString())
 		} else {
-			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
+			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
 			map.isStateChange = true
@@ -439,11 +460,12 @@ def zwaveEvent(physicalgraph.zwave.commands.timev1.TimeGet cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 	// The old Schlage locks use group 1 for basic control - we don't want that, so unsubscribe from group 1
 	def result = [ createEvent(name: "lock", value: cmd.value ? "unlocked" : "locked") ]
-	result << response(zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	if (state.assoc != zwaveHubNodeId) {
-		result << response(zwave.associationV1.associationGet(groupingIdentifier:2))
-	}
-	result
+	def cmds = [
+			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
+			"delay 1200",
+			zwave.associationV1.associationGet(groupingIdentifier:2).format()
+	]
+	[result, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
@@ -513,11 +535,18 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
 def ping() {
-	refresh()
+	runIn(30, followupStateCheck)
+	secure(zwave.doorLockV1.doorLockOperationGet())
+}
+
+def followupStateCheck() {
+	runEvery1Hour(stateCheck)
+	stateCheck()
+}
+
+def stateCheck() {
+	sendHubCommand(new physicalgraph.device.HubAction(secure(zwave.doorLockV1.doorLockOperationGet())))
 }
 
 def refresh() {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"
@@ -85,11 +85,21 @@ metadata {
 	details(["switch", "power", "energy", "levelSliderControl", "refresh", "reset"])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x26: 3,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+		0x32: 3,  // Meter
+	]
+}
+
 // parse events into attributes
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x32:3])
+		def cmd = zwave.parse(description, commandClassVersions)
 		if (cmd) {
 			result = zwaveEvent(cmd)
 	        log.debug("'$description' parsed to $result")
@@ -124,6 +134,21 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelR
 	dimmerEvents(cmd)
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
 def dimmerEvents(physicalgraph.zwave.Command cmd) {
 	def result = []
 	def value = (cmd.value ? "on" : "off")

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -89,10 +89,19 @@ def updated() {
 	} catch (e) { log.debug e }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x32: 1,  // SwitchMultilevel
+		0x56: 1,  // Crc16Encap
+		0x72: 2,  // ManufacturerSpecific
+	]
+}
+
 def parse(String description) {
 	def result = null
 	if(description == "updated") return
-	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
@@ -157,6 +166,16 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	result
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.debug "$device.displayName: Unhandled: $cmd"
 	[:]

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -29,7 +29,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Portable Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC"
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2014-07-15
  */
 metadata {
-	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -22,6 +22,7 @@ metadata {
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -71,9 +71,17 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -120,6 +128,15 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -22,9 +22,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "GE Plug-In Switch"
 		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
@@ -89,9 +89,17 @@ def updated(){
     }
 }
 
+def getCommandClassVersions() {
+	[
+		0x20: 1,  // Basic
+		0x56: 1,  // Crc16Encap
+		0x70: 1,  // Configuration
+	]
+}
+
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	def cmd = zwave.parse(description, commandClassVersions)
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -138,6 +146,16 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def versions = commandClassVersions
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -0,0 +1,38 @@
+# Z-Wave Water Valve
+
+Cloud Execution
+
+Works with: 
+
+* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Valve** - allows for the control of a valve device
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
+
+

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -12,14 +12,16 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
+		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
+		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -35,7 +37,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -43,7 +45,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -53,24 +55,32 @@ metadata {
 
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
 def parse(String description) {
 	log.trace "parse description : $description"
-	def result = null
 	def cmd = zwave.parse(description, [0x20: 1])
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
@@ -80,20 +90,22 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "productTypeId:    ${cmd.productTypeId}"
     def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
     updateDataValue("MSR", msr)
-    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
+    return createEventWithDebug([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
+    return createEventWithDebug([descriptionText: cmd.toString(), isStateChange: true, displayed: true])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -114,6 +126,13 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
@@ -122,3 +141,9 @@ def refresh() {
     }
     delayBetween(commands,100)
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.descriptionText}"
+	return event
+}

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,7 +765,6 @@ def turnOffSwitch() {
         } else {
             
             device.off();
-                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -789,6 +788,7 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-        	return [temperature: device.currentValue('temperature')] + bat
+            def scale = [Scale: location.temperatureScale]
+        	return [temperature: device.currentValue('temperature')] + bat + scale
    		}
-   }
+   }

smartapps/naissan/lights-off-with-no-motion-and-presence.src/lights-off-with-no-motion-and-presence.groovy

@@ -15,66 +15,66 @@ definition(
 )
 
 preferences {
-	section("Light switches to turn off") {
-		input "switches", "capability.switch", title: "Choose light switches", multiple: true
-	}
-	section("Turn off when there is no motion and presence") {
-		input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
-   		input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
-	}
-	section("Delay before turning off") {                    
-		input "delayMins", "number", title: "Minutes of inactivity?"
-	}
+  section("Light switches to turn off") {
+    input "switches", "capability.switch", title: "Choose light switches", multiple: true
+  }
+  section("Turn off when there is no motion and presence") {
+    input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
+    input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
+  }
+  section("Delay before turning off") {
+    input "delayMins", "number", title: "Minutes of inactivity?"
+  }
 }
 
 def installed() {
-	subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  subscribe(motionSensor, "motion", motionHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def updated() {
-	unsubscribe()
-	subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  unsubscribe()
+  subscribe(motionSensor, "motion", motionHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def motionHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "inactive") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
-	}
+  log.debug "handler $evt.name: $evt.value"
+  if (evt.value == "inactive") {
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
+  }
 }
 
 def presenceHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "not present") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
-	}
+  log.debug "handler $evt.name: $evt.value"
+  if (evt.value == "not present") {
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
+  }
 }
 
 def isActivePresence() {
-	// check all the presence sensors, make sure none are present
-	def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
-	!noPresence		
+  // check all the presence sensors, make sure none are present
+  def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
+  !noPresence
 }
 
 def scheduleCheck() {
-	log.debug "scheduled check"
-	def motionState = motionSensor.currentState("motion")
+  log.debug "scheduled check"
+  def motionState = motionSensor.currentState("motion")
     if (motionState.value == "inactive") {
-        def elapsed = now() - motionState.rawDateCreated.time
-    	def threshold = 1000 * 60 * delayMins - 1000
-    	if (elapsed >= threshold) {
-        	if (!isActivePresence()) {
-            	log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
-            	switches.off()
-            } else {
-            	log.debug "Presence is active: do nothing"
-            }
-    	} else {
-        	log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
+      def elapsed = now() - motionState.rawDateCreated.time
+      def threshold = 1000 * 60 * delayMins - 1000
+      if (elapsed >= threshold) {
+        if (!isActivePresence()) {
+          log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
+          switches.off()
+        } else {
+          log.debug "Presence is active: do nothing"
         }
+      } else {
+        log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
+      }
     } else {
-    	log.debug "Motion is active: do nothing"
+      log.debug "Motion is active: do nothing"
     }
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,3 +1,7 @@
+import javax.crypto.Mac;
+import javax.crypto.spec.SecretKeySpec;
+import java.security.InvalidKeyException;
+
 /**
  *  OpenT2T SmartApp Test
  *
@@ -39,7 +43,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -52,86 +56,109 @@ definition(
 //Device Inputs
 preferences {
 	section("Allow OpenT2T to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false, hideWhenEmpty: true
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors?: []
-	inputList += garageDoors?: []
-	inputList += locks?: []
-	inputList += cameras?: []
-	inputList += motionSensors?: []
-	inputList += presenceSensors?: []
-	inputList += switches?: []
-	inputList += thermostats?: []
-	inputList += waterSensors?: []
+	inputList += contactSensors ?: []
+	inputList += garageDoors ?: []
+	inputList += locks ?: []
+	inputList += cameras ?: []
+	inputList += motionSensors ?: []
+	inputList += presenceSensors ?: []
+	inputList += switches ?: []
+	inputList += thermostats ?: []
+	inputList += waterSensors ?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
-	path("/subscriptionURL/:url") {
-		action: [
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action: [
-				PUT: "updateConnectionId"
-		]
-	}
 	path("/devices") {
-		action: [
+		action:
+		[
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action: [
+		action:
+		[
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action: [
+		action:
+		[
 				PUT: "updateDevice"
 		]
 	}
-	path("/subscription/:id") {
-		action: [
-				POST: "registerDeviceChange",
+	path("/deviceSubscription") {
+		action:
+		[
+				POST  : "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
+	path("/locationSubscription") {
+		action:
+		[
+				POST  : "registerDeviceGraph",
+				DELETE: "unregisterDeviceGraph"
+		]
+	}
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+	log.debug "Installing with settings: ${settings}"
 	initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+	log.debug "Updating with settings: ${settings}"
+
+	//Initialize state variables if didn't exist.
+	if (state.deviceSubscriptionMap == null) {
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+	if (state.locationSubscriptionMap == null) {
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
+	if (state.verificationKeyMap == null) {
+		state.verificationKeyMap = [:]
+		log.debug "verificationKeyMap created."
+	}
+
 	unsubscribe()
-	registerSubscriptions()
+	registerAllDeviceSubscriptions()
 }
 
 def initialize() {
-	state.connectionId = ""
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
-	registerSubscriptions()
+	log.debug "Initializing with settings: ${settings}"
+	state.deviceSubscriptionMap = [:]
+	log.debug "deviceSubscriptionMap created."
+	state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
+	state.verificationKeyMap = [:]
+	log.debug "verificationKeyMap created."
+	registerAllDeviceSubscriptions()
 }
 
+/*** Subscription Functions  ***/
+
 //Subscribe events for all devices
-def registerSubscriptions() {
+def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
@@ -139,102 +166,249 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+		theAtts.each { att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
 	}
 }
 
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+
+	if (myDevice == null) {
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+		theAtts.each { att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
+		}
+		log.info "Subscribing for ${myDevice.displayName}"
+
+		if (subscriptionEndpt != null) {
+			if (state.deviceSubscriptionMap[deviceId] == null) {
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+
+			if (params.key != null) {
+				state.verificationKeyMap[subscriptionEndpt] = params.key
+				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+			}
 		}
-		return ["succeed"]
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
+	return ["succeed"]
 }
 
 //Endpoints function: Unsubscribe to events from a specific device
 def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+
+	if (myDevice == null) {
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+
 	try {
-		unsubscribe(myDevice)
-		log.info "Unregistering ${myDevice.displayName}"
-		return ["succeed"]
+		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)) {
+				if (state.deviceSubscriptionMap[deviceId].size() == 1) {
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+				state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+		} else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
+		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+		if (state.locationSubscriptionMap[location.id] == null) {
+			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)) {
+			state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+		}
+
+		if (params.key != null) {
+			state.verificationKeyMap[subscriptionEndpt] = params.key
+			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+		}
+
+		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+		log.info "Current verification key map is ${state.verificationKeyMap}"
+		return ["succeed"]
+	} else {
+		httpError(400, "missing input parameter: subscriptionURL")
+	}
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+
+	try {
+		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)) {
+				if (state.locationSubscriptionMap[location.id].size() == 1) {
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+				state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+		} else {
+			httpError(400, "missing input parameter: subscriptionURL")
+		}
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
-	def evt_device_id = evt.deviceId
-	def evt_device_value = evt.value
-	def evt_name = evt.name
-	def evt_device = evt.device
-	def evt_deviceType = getDeviceType(evt_device);
-	def deviceInfo
+def deviceEventHandler(evt) {
+	def evtDevice = evt.device
+	def evtDeviceType = getDeviceType(evtDevice)
+	def deviceData = [];
 
-	if(evt_deviceType == "thermostat")
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
+	if (evt.data != null) {
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
-	def params = [
-			uri: "${state.endpointURL}/${state.connectionId}",
-			body: [ deviceInfo ]
-	]
-	try {
-		log.trace "POST URI: ${params.uri}"
-		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
-			resp.headers.each {
-				log.debug "${it.name} : ${it.value}"
-			}
-			log.trace "response status code: ${resp.status}"
-			log.trace "response data: ${resp.data}"
+	if (evtDeviceType == "thermostat") {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id]
+	} else {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id]
+	}
+
+	def params = [body: deviceData]
+
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
+	state.deviceSubscriptionMap[evtDevice.id].each {
+		params.uri = "${it}"
+		if (state.verificationKeyMap[it] != null) {
+			def key = state.verificationKeyMap[it]
+			params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+		}
+		log.trace "POST URI: ${params.uri}"
+		log.trace "Header: ${params.header}"
+		log.trace "Payload: ${params.body}"
+		try {
+			httpPostJson(params) { resp ->
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
+			}
+		} catch (e) {
+			log.error "something went wrong: $e"
 		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
 	}
 }
 
-//Endpoints function: update subcription endpoint url [state.endpoint]
-void updateEndpointURL() {
-	state.endpointURL = params.url
-	log.info "Updated EndpointURL to ${state.endpointURL}"
+def locationEventHandler(evt) {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
+	switch (evt.name) {
+		case "DeviceCreated":
+		case "DeviceDeleted":
+			def evtDevice = evt.device
+			def evtDeviceType = getDeviceType(evtDevice)
+			def params = [body: [eventType: evt.name, deviceId: evtDevice.id, locationId: location.id]]
+
+			if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null) {
+				state.deviceSubscriptionMap.remove(evtDevice.id)
+			}
+
+			state.locationSubscriptionMap[location.id].each {
+				params.uri = "${it}"
+				if (state.verificationKeyMap[it] != null) {
+					def key = state.verificationKeyMap[it]
+					params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+				}
+				log.trace "POST URI: ${params.uri}"
+				log.trace "Header: ${params.header}"
+				log.trace "Payload: ${params.body}"
+				try {
+					httpPostJson(params) { resp ->
+						log.trace "response status code: ${resp.status}"
+						log.trace "response data: ${resp.data}"
+					}
+				} catch (e) {
+					log.error "something went wrong: $e"
+				}
+			}
+		case "DeviceUpdated":
+		default:
+			break
+	}
 }
 
-//Endpoints function: update global variable [state.connectionId]
-void updateConnectionId() {
-	def connId = params.connId
-	state.connectionId = connId
-	log.info "Updated ConnectionID to ${state.connectionId}"
+private ComputHMACValue(key, data) {
+	try {
+		SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
+		Mac mac = Mac.getInstance("HmacSHA1")
+		mac.init(secretKeySpec)
+		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
+		return byteArrayToString(digest)
+	} catch (InvalidKeyException e) {
+		log.error "Invalid key exception while converting to HMac SHA1"
+	}
 }
 
+private def byteArrayToString(byte[] data) {
+	BigInteger bigInteger = new BigInteger(1, data)
+	String hash = bigInteger.toString(16)
+	return hash
+}
+
+/*** Device Query/Update Functions  ***/
+
 //Endpoints function: return all device data in json format
 def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat")
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		}
-		else
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+		if (deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -247,14 +421,12 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat")
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+	if (deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
+
 	log.debug "getDevice, return: ${device}"
 	return device
 }
@@ -265,18 +437,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command){
+		if (command) {
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find {it.name == value}) {
+				if (location.modes?.find { it.name == value }) {
 					location.setMode(value)
 				}
-			}else if (command == "thermostatSetpoint"){
-				switch(device.currentThermostatMode){
+			} else if (command == "thermostatSetpoint") {
+				switch (device.currentThermostatMode) {
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -290,7 +462,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			}else if (!device) {
+			} else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -300,11 +472,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if(value.isNumber()) {
+				} else if (value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value){
+				} else if (value) {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -331,17 +503,16 @@ private getDeviceType(device) {
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
 
 	//Loop through the device capability list to determine the device type.
-	capabilities.each {capability ->
-		switch(capability.name.toLowerCase())
-		{
+	capabilities.each { capability ->
+		switch (capability.name.toLowerCase()) {
 			case "switch":
 				deviceType = "switch"
 
 				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+				if (capabilities.any { it.name.toLowerCase() == "switch level" }) {
 
 					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+					if (capabilities.any { it.name.toLowerCase() == "power meter" }) {
 						deviceType = "dimmerSwitch"
 						return deviceType
 					} else {
@@ -350,9 +521,6 @@ private getDeviceType(device) {
 					}
 				}
 				break
-			case "contact sensor":
-				deviceType = "contactSensor"
-				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
 				return deviceType
@@ -362,17 +530,15 @@ private getDeviceType(device) {
 			case "video camera":
 				deviceType = "camera"
 				return deviceType
-			case "motion sensor":
-				deviceType = "motionSensor"
-				return deviceType
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
 				return deviceType
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
 			case "water sensor":
-				deviceType = "waterSensor"
+				deviceType = "genericSensor"
 				return deviceType
 			default:
 				break
@@ -387,14 +553,33 @@ private findDevice(deviceId) {
 }
 
 //Return a list of device attributes
-private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute->
+private deviceAttributeList(device, deviceType) {
+	def attributeList = [:]
+	def allAttributes = device.supportedAttributes
+	allAttributes.each { attribute ->
 		try {
-			[ (attribute.name): device.currentValue(attribute.name) ]
-		} catch(e) {
-			[ (attribute.name): null ]
+			def currentState = device.currentState(attribute.name)
+			if (currentState != null) {
+				switch (attribute.name) {
+					case 'temperature':
+						attributeList.putAll([(attribute.name): currentState.value, 'temperatureScale': location.temperatureScale])
+						break;
+					default:
+						attributeList.putAll([(attribute.name): currentState.value])
+						break;
+				}
+				if (deviceType == "genericSensor") {
+					def key = attribute.name + "_lastUpdated"
+					attributeList.putAll([(key): currentState.isoDate])
+				}
+			} else {
+				attributeList.putAll([(attribute.name): null]);
+			}
+		} catch (e) {
+			attributeList.putAll([(attribute.name): null]);
 		}
 	}
+	return attributeList
 }
 
 //Map device command and value. 
@@ -464,8 +649,7 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			}
-			else if (value == 0 || value == "0" || value == "unlock") {
+			} else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -474,5 +658,5 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand,resultValue]
+	return [resultCommand, resultValue]
 }

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Bose SoundTouch (Connect)
  *

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Hue Service Manager
  *
@@ -73,7 +75,7 @@ def bridgeDiscovery(params = [:]) {
 	}
 
 	ssdpSubscribe()
-
+	log.trace "bridgeRefreshCount: $bridgeRefreshCount"
 	//bridge discovery request every 15 //25 seconds
 	if ((bridgeRefreshCount % 5) == 0) {
 		discoverBridges()
@@ -207,6 +209,7 @@ def bulbDiscovery() {
 }
 
 private discoverBridges() {
+	log.trace "Sending Hue Discovery message to the hub"
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 
@@ -1082,7 +1085,6 @@ def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
 	updateInProgress()
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
 	return "Bulb is turning On"
 }
@@ -1091,7 +1093,6 @@ def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
 	updateInProgress()
-	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
 	return "Bulb is turning Off"
 }
@@ -1107,8 +1108,6 @@ def setLevel(childDevice, percent) {
 	else
 		level = Math.min(Math.round(percent * 254 / 100), 254)
 
-	createSwitchEvent(childDevice, level > 0, percent)
-
 	// For Zigbee lights, if level is set to 0 ST just turns them off without changing level
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
@@ -1127,7 +1126,6 @@ def setSaturation(childDevice, percent) {
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
@@ -1139,7 +1137,6 @@ def setHue(childDevice, percent) {
 	// 0 - 65535
 	def level = Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
@@ -1150,7 +1147,6 @@ def setColorTemperature(childDevice, huesettings) {
 	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000 / huesettings)
-	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $ct"
 }
@@ -1209,7 +1205,6 @@ def setColor(childDevice, huesettings) {
 	if (huesettings.switch == "off")
 		value.on = false
 
-	createSwitchEvent(childDevice, value.on ? "on" : "off")
 	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
@@ -1321,32 +1316,6 @@ private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }
 
-/**
- * Sends appropriate turningOn/turningOff state events depending on switch or level changes.
- *
- * @param childDevice device to send event for
- * @param setSwitch The new switch state, "on" or "off"
- * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- * 				  that should generate "off" instead of level change
- */
-private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
-
-	if (setLevel == null) {
-		setLevel = childDevice.device?.currentValue("level")
-	}
-	// Create on, off, turningOn or turningOff event as necessary
-	def currentState = childDevice.device?.currentValue("switch")
-	if ((currentState == "off" || currentState == "turningOff")) {
-		if (setSwitch == "on" || setLevel > 0) {
-			childDevice.sendEvent(name: "switch", value: "turningOn", displayed: false)
-		}
-	} else if ((currentState == "on" || currentState == "turningOn")) {
-		if (setSwitch == "off" || setLevel == 0) {
-			childDevice.sendEvent(name: "switch", value: "turningOff", displayed: false)
-		}
-	}
-}
-
 /**
  * Return the supported color range for different Hue lights. If model is not specified
  * it defaults to the smallest Gamut (B) to ensure that colors set on a mix of devices

smartapps/smartthings/json-complete-api.src/json-complete-api.groovy

@@ -0,0 +1,447 @@
+/**
+ *  JSON Complete API
+ *
+ *  Copyright 2017 Paul Lovelace
+ *
+ */
+definition(
+    name: "JSON Complete API",
+    namespace: "smartthings",
+    author: "Ashok Malhotra",
+    description: "API for JSON with complete set of devices",
+    category: "SmartThings Labs",
+    iconUrl:   "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%401.png",
+    iconX2Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%402.png",
+    iconX3Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%403.png",
+    oauth: true)
+
+
+preferences {
+    page(name: "copyConfig")
+}
+
+//When adding device groups, need to add here
+def copyConfig() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+    dynamicPage(name: "copyConfig", title: "Configure Devices", install:true, uninstall:true) {
+        section("Select devices to include in the /devices API call") {
+            paragraph "Version 0.5.5"
+            input "deviceList", "capability.refresh", title: "Most Devices", multiple: true, required: false
+            input "sensorList", "capability.sensor", title: "Sensor Devices", multiple: true, required: false
+            input "switchList", "capability.switch", title: "All Switches", multiple: true, required: false
+            //paragraph "Devices Selected: ${deviceList ? deviceList?.size() : 0}\nSensors Selected: ${sensorList ? sensorList?.size() : 0}\nSwitches Selected: ${switchList ? switchList?.size() : 0}"
+        }
+        section("Configure Pubnub") {
+            input "pubnubSubscribeKey", "text", title: "PubNub Subscription Key", multiple: false, required: false
+            input "pubnubPublishKey", "text", title: "PubNub Publish Key", multiple: false, required: false
+            input "subChannel", "text", title: "Channel (Can be anything)", multiple: false, required: false
+        }
+        section() {
+            paragraph "View this SmartApp's configuration to use it in other places."
+            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
+        }
+ 
+        section() {
+        	paragraph "View the JSON generated from the installed devices."
+            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Device Results", description:"View accessories JSON"
+        }
+        section() {
+        	paragraph "Enter the name you would like shown in the smart app list"
+        	label title:"SmartApp Label (optional)", required: false 
+        }
+    }
+}
+
+def renderDevices() {
+    def deviceData = []
+        deviceList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+        sensorList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+        switchList.each { 
+        	try {
+            deviceData << [name: it.displayName,
+    				basename: it.name,
+    				deviceid: it.id, 
+                    status: it.status,
+                    manufacturerName: it.getManufacturerName(),
+                    modelName: it.getModelName(),
+                    lastTime: it.getLastActivity(),
+                    capabilities: deviceCapabilityList(it), 
+                    commands: deviceCommandList(it), 
+                    attributes: deviceAttributeList(it)
+                    ]
+      		} catch (e) {
+      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
+      		}
+        }    
+    return deviceData
+}
+
+def findDevice(paramid) {
+	def device = deviceList.find { it.id == paramid }
+  	if (device) return device
+	device = sensorList.find { it.id == paramid }
+	if (device) return device
+  	device = switchList.find { it.id == paramid }
+
+	return device
+ }
+//No more individual device group definitions after here.
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	if(!state.accessToken) {
+         createAccessToken()
+    }
+    registerAll()
+	state.subscriptionRenewed = 0
+    subscribe(location, null, HubResponseEvent, [filterEvents:false])
+    log.debug "0.5.5"
+}
+
+def authError() {
+    [error: "Permission denied"]
+}
+def renderConfig() {
+    def configJson = new groovy.json.JsonOutput().toJson([
+        description: "JSON API",
+        platforms: [
+            [
+                platform: "SmartThings",
+                name: "SmartThings",
+                app_url: apiServerUrl("/api/smartapps/installations/"),
+                app_id: app.id,
+                access_token:  state.accessToken
+            ]
+        ],
+    ])
+
+    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
+    render contentType: "text/plain", data: configString
+}
+def renderLocation() {
+  	[
+    	latitude: location.latitude,
+    	longitude: location.longitude,
+    	mode: location.mode,
+    	name: location.name,
+    	temperature_scale: location.temperatureScale,
+    	zip_code: location.zipCode,
+        hubIP: location.hubs[0].localIP,
+        smartapp_version: '0.5.5'
+  	]
+}
+def CommandReply(statusOut, messageOut) {
+	def replyData =
+    	[
+        	status: statusOut,
+            message: messageOut
+        ]
+
+    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
+    render contentType: "application/json", data: replyJson
+}
+def deviceCommand() {
+	log.info("Command Request")
+	def device = findDevice(params.id)    
+    def command = params.command
+    
+  	if (!device) {
+		log.error("Device Not Found")
+      	CommandReply("Failure", "Device Not Found")
+  	} else if (!device.hasCommand(command)) {
+      	log.error("Device "+device.displayName+" does not have the command "+command)
+      	CommandReply("Failure", "Device "+device.displayName+" does not have the command "+command)
+  	} else {
+      	def value1 = request.JSON?.value1
+      	def value2 = request.JSON?.value2
+      	try {
+      		if (value2) {
+	       		device."$command"(value1,value2)
+	    	} else if (value1) {
+	    		device."$command"(value1)
+	    	} else {
+	    		device."$command"()
+	    	}
+        	log.info("Command Successful for Device "+device.displayName+", Command "+command)
+        	CommandReply("Success", "Device "+device.displayName+", Command "+command)
+      	} catch (e) {
+      		log.error("Error Occurred For Device "+device.displayName+", Command "+command)
+ 	    	CommandReply("Failure", "Error Occurred For Device "+device.displayName+", Command "+command)
+      	}
+  	}
+}
+def deviceAttribute() {
+	def device = findDevice(params.id)    
+    def attribute = params.attribute
+  	if (!device) {
+    	httpError(404, "Device not found")
+  	} else {
+      	def currentValue = device.currentValue(attribute)
+      	[currentValue: currentValue]
+  	}
+}
+def deviceQuery() {
+	def device = findDevice(params.id)    
+    if (!device) { 
+    	device = null
+        httpError(404, "Device not found")
+    } 
+    
+    if (result) {
+    	def jsonData =
+        	[
+         		name: device.displayName,
+            	deviceid: device.id,
+            	capabilities: deviceCapabilityList(device),
+            	commands: deviceCommandList(device),
+            	attributes: deviceAttributeList(device)
+         	]
+    	def resultJson = new groovy.json.JsonOutput().toJson(jsonData)
+    	render contentType: "application/json", data: resultJson
+    }
+}
+def deviceCapabilityList(device) {
+  	def i=0
+  	device.capabilities.collectEntries { capability->
+    	[
+      		(capability.name):1
+    	]
+  	}
+}
+def deviceCommandList(device) {
+  	def i=0
+  	device.supportedCommands.collectEntries { command->
+    	[
+      		(command.name): (command.arguments)
+    	]
+  	}
+}
+def deviceAttributeList(device) {
+  	device.supportedAttributes.collectEntries { attribute->
+    	try {
+      		[
+        		(attribute.name): device.currentValue(attribute.name)
+      		]
+    	} catch(e) {
+      		[
+        		(attribute.name): null
+      		]
+    	}
+  	}
+}
+def getAllData() {
+	//Since we're about to send all of the data, we'll count this as a subscription renewal and clear out pending changes.
+	state.subscriptionRenewed = now()
+    state.devchanges = []
+
+
+	def deviceData =
+    [	location: renderLocation(),
+        deviceList: renderDevices() ]
+    def deviceJson = new groovy.json.JsonOutput().toJson(deviceData)
+    render contentType: "application/json", data: deviceJson
+}
+def startSubscription() {
+//This simply registers the subscription.
+    state.subscriptionRenewed = now()
+	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
+    render contentType: "application/json", data: deviceJson    
+}
+def endSubscription() {
+//Because it takes too long to register for an api command, we don't actually unregister.
+//We simply blank the devchanges and change the subscription renewal to two hours ago.
+	state.devchanges = []
+    state.subscriptionRenewed = 0
+ 	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
+    render contentType: "application/json", data: deviceJson     
+}
+def registerAll() {
+//This has to be done at startup because it takes too long for a normal command.
+	log.debug "Registering All Events"
+    state.devchanges = []
+	registerChangeHandler(deviceList)
+	registerChangeHandler(sensorList)
+	registerChangeHandler(switchList)
+}
+def registerChangeHandler(myList) {
+	myList.each { myDevice ->
+		def theAtts = myDevice.supportedAttributes
+		theAtts.each {att ->
+		    subscribe(myDevice, att.name, changeHandler)
+    	log.debug "Registering ${myDevice.displayName}.${att.name}"
+		}
+	}
+}
+def changeHandler(evt) {
+	//Send to Pubnub if we need to.
+    if (pubnubPublishKey!=null) {
+	    def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+		def changeJson = new groovy.json.JsonOutput().toJson(deviceData)
+		def changeData = URLEncoder.encode(changeJson)
+        def uri = "http://pubsub.pubnub.com/publish/${pubnubPublishKey}/${pubnubSubscribeKey}/0/${subChannel}/0/${changeData}"
+		log.debug "${uri}"
+    	httpGet(uri)
+    }
+  
+  	if (state.directIP!="") {
+    	//Send Using the Direct Mechanism
+        def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+        //How do I control the port?!?
+        log.debug "Sending Update to ${state.directIP}:${state.directPort}"
+        def result = new physicalgraph.device.HubAction(
+    		method: "GET",
+    		path: "/update",
+    		headers: [
+        		HOST: "${state.directIP}:${state.directPort}",
+                change_device: evt.deviceId,
+                change_attribute: evt.name,
+                change_value: evt.value,
+                change_date: evt.date
+    		]
+		)
+        sendHubCommand(result)
+    }
+    
+	//Only add to the state's devchanges if the endpoint has renewed in the last 10 minutes.
+    if (state.subscriptionRenewed>(now()-(1000*60*10))) {
+  		if (evt.isStateChange()) {
+			state.devchanges << [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
+      }
+    } else if (state.subscriptionRenewed>0) { //Otherwise, clear it
+    	log.debug "Endpoint Subscription Expired. No longer storing changes for devices."
+        state.devchanges=[]
+        state.subscriptionRenewed=0
+    }
+}
+def getChangeEvents() {
+    //Store the changes so we can swap it out very quickly and eliminate the possibility of losing any.
+    //This is mainly to make this thread safe because I'm willing to bet that a change event can fire
+    //while generating/sending the JSON.
+    def oldchanges = state.devchanges
+    state.devchanges=[]
+    state.subscriptionRenewed = now()
+	if (oldchanges.size()==0) {
+        def deviceJson = new groovy.json.JsonOutput().toJson([status: "None"])
+	    render contentType: "application/json", data: deviceJson    
+    } else {
+    	def changeJson = new groovy.json.JsonOutput().toJson([status: "Success", attributes:oldchanges])
+    	render contentType: "application/json", data: changeJson
+	}
+}
+def enableDirectUpdates() {
+	log.debug("Command Request")
+	state.directIP = params.ip
+    state.directPort = params.port
+	log.debug("Trying ${state.directIP}:${state.directPort}")
+	def result = new physicalgraph.device.HubAction(
+    		method: "GET",
+    		path: "/initial",
+    		headers: [
+        		HOST: "${state.directIP}:${state.directPort}"
+    		],
+    		query: deviceData
+		)
+     sendHubCommand(result)
+}
+
+def HubResponseEvent(evt) {
+	log.debug(evt.description)
+}
+
+def locationHandler(evt) {
+    def description = evt.description
+    def hub = evt?.hubId
+
+    log.debug "cp desc: " + description
+    if (description.count(",") > 4)
+    {
+def bodyString = new String(description.split(',')[5].split(":")[1].decodeBase64())
+log.debug(bodyString)
+}
+}
+
+def getSubscriptionService() {
+	def replyData =
+    	[
+        	pubnub_publishkey: pubnubPublishKey,
+            pubnub_subscribekey: pubnubSubscribeKey,
+            pubnub_channel: subChannel
+        ]
+
+    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
+    render contentType: "application/json", data: replyJson
+}
+
+mappings {
+    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
+        path("/devices")                        { action: [GET: "authError"] }
+        path("/config")                         { action: [GET: "authError"] }
+        path("/location")                       { action: [GET: "authError"] }
+        path("/:id/command/:command")     		{ action: [POST: "authError"] }
+        path("/:id/query")						{ action: [GET: "authError"] }
+        path("/:id/attribute/:attribute") 		{ action: [GET: "authError"] }
+        path("/subscribe")                      { action: [GET: "authError"] }
+        path("/getUpdates")                     { action: [GET: "authError"] }
+        path("/unsubscribe")                    { action: [GET: "authError"] }
+        path("/startDirect/:ip/:port")          { action: [GET: "authError"] }
+        path("/getSubcriptionService")          { action: [GET: "authError"] }
+
+    } else {
+        path("/devices")                        { action: [GET: "getAllData"] }
+        path("/config")                         { action: [GET: "renderConfig"]  }
+        path("/location")                       { action: [GET: "renderLocation"] }
+        path("/:id/command/:command")     		{ action: [POST: "deviceCommand"] }
+        path("/:id/query")						{ action: [GET: "deviceQuery"] }
+        path("/:id/attribute/:attribute") 		{ action: [GET: "deviceAttribute"] }
+        path("/subscribe")                      { action: [GET: "startSubscription"] }
+        path("/getUpdates")                     { action: [GET: "getChangeEvents"] }
+        path("/unsubscribe")                    { action: [GET: "endSubscription"] }
+        path("/startDirect/:ip/:port")          { action: [GET: "enableDirectUpdates"] }
+        path("/getSubcriptionService")          { action: [GET: "getSubscriptionService"] }
+    }
+}

smartapps/smartthings/left-it-open.src/left-it-open.groovy

@@ -27,84 +27,82 @@ definition(
 
 preferences {
 
-	section("Monitor this door or window") {
-		input "contact", "capability.contactSensor"
-	}
-	section("And notify me if it's open for more than this many minutes (default 10)") {
-		input "openThreshold", "number", description: "Number of minutes", required: false
-	}
-    section("Delay between notifications (default 10 minutes") {
-        input "frequency", "number", title: "Number of minutes", description: "", required: false
+  section("Monitor this door or window") {
+    input "contact", "capability.contactSensor"
+  }
+
+  section("And notify me if it's open for more than this many minutes (default 10)") {
+    input "openThreshold", "number", description: "Number of minutes", required: false
+  }
+
+  section("Delay between notifications (default 10 minutes") {
+    input "frequency", "number", title: "Number of minutes", description: "", required: false
+  }
+
+  section("Via text message at this number (or via push notification if not specified") {
+    input("recipients", "contact", title: "Send notifications to") {
+      input "phone", "phone", title: "Phone number (optional)", required: false
     }
-	section("Via text message at this number (or via push notification if not specified") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone", "phone", title: "Phone number (optional)", required: false
-        }
-	}
+  }
 }
 
 def installed() {
-	log.trace "installed()"
-	subscribe()
+  log.trace "installed()"
+  subscribe()
 }
 
 def updated() {
-	log.trace "updated()"
-	unsubscribe()
-	subscribe()
+  log.trace "updated()"
+  unsubscribe()
+  subscribe()
 }
 
 def subscribe() {
-	subscribe(contact, "contact.open", doorOpen)
-	subscribe(contact, "contact.closed", doorClosed)
+  subscribe(contact, "contact.open", doorOpen)
+  subscribe(contact, "contact.closed", doorClosed)
 }
 
-def doorOpen(evt)
-{
-	log.trace "doorOpen($evt.name: $evt.value)"
-	def t0 = now()
-	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
-	runIn(delay, doorOpenTooLong, [overwrite: false])
-	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
+def doorOpen(evt) {
+  log.trace "doorOpen($evt.name: $evt.value)"
+  def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
+  runIn(delay, doorOpenTooLong, [overwrite: true])
 }
 
-def doorClosed(evt)
-{
-	log.trace "doorClosed($evt.name: $evt.value)"
+def doorClosed(evt) {
+  log.trace "doorClosed($evt.name: $evt.value)"
+  unschedule(doorOpenTooLong)
 }
 
 def doorOpenTooLong() {
-	def contactState = contact.currentState("contact")
-    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
+  def contactState = contact.currentState("contact")
+  def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
 
-	if (contactState.value == "open") {
-		def elapsed = now() - contactState.rawDateCreated.time
-		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
-		if (elapsed >= threshold) {
-			log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
-			sendMessage()
-            runIn(freq, doorOpenTooLong, [overwrite: false])
-		} else {
-			log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
-		}
-	} else {
-		log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
-	}
+  if (contactState.value == "open") {
+    def elapsed = now() - contactState.rawDateCreated.time
+    def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+    if (elapsed >= threshold) {
+      log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+      sendMessage()
+      runIn(freq, doorOpenTooLong, [overwrite: false])
+    } else {
+      log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+    }
+  } else {
+    log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
+  }
 }
 
-void sendMessage()
-{
-	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
-	def msg = "${contact.displayName} has been left open for ${minutes} minutes."
-	log.info msg
-    if (location.contactBookEnabled) {
-        sendNotificationToContacts(msg, recipients)
-    }
-    else {
-        if (phone) {
-            sendSms phone, msg
-        } else {
-            sendPush msg
-        }
+void sendMessage() {
+  def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
+  def msg = "${contact.displayName} has been left open for ${minutes} minutes."
+  log.info msg
+  if (location.contactBookEnabled) {
+    sendNotificationToContacts(msg, recipients)
+  } else {
+    if (phone) {
+      sendSms phone, msg
+    } else {
+      sendPush msg
     }
+  }
 }

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -47,6 +47,7 @@ def getCallbackUrl()             { return "${getServerUrl()}/oauth/callback" }
 def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
 def getSecretKey()               { return appSettings.secretKey }
 def getClientId()                { return appSettings.clientId }
+private getVendorName() { "LIFX" }
 
 def authPage() {
 	log.debug "authPage test1"
@@ -76,6 +77,7 @@ def authPage() {
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {
 				input "selectedLocationId", "enum", required:true, title:"Select location ({{count}} found)", messageArgs: [count: count], multiple:false, options:options, submitOnChange: true
+				paragraph "Devices will be added automatically from your ${vendorName} account. To add or delete devices please use the Official ${vendorName} App."
 			}
 		}
 	}

smartapps/smartthings/smart-nightlight.src/smart-nightlight.groovy

@@ -98,7 +98,7 @@ def motionHandler(evt) {
 	else {
 		state.motionStopTime = now()
 		if(delayMinutes) {
-			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: false])
+			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: true])
 		} else {
 			turnOffMotionAfterDelay()
 		}

smartapps/smartthings/wattvision-manager.src/wattvision-manager.groovy

@@ -136,10 +136,20 @@ def getDataForChild(child, startDate, endDate) {
 
 	def wattvisionURL = wattvisionURL(child.deviceNetworkId, startDate, endDate)
 	if (wattvisionURL) {
-		httpGet(uri: wattvisionURL) { response ->
-			def json = new org.json.JSONObject(response.data.toString())
-			child.addWattvisionData(json)
-			return "success"
+		try {
+			httpGet(uri: wattvisionURL) { response ->
+				def json = new org.json.JSONObject(response.data.toString())
+				child.addWattvisionData(json)
+				return "success"
+			}
+		} catch (groovyx.net.http.HttpResponseException httpE) {
+			log.error "Wattvision getDataForChild HttpResponseException: ${httpE} -> ${httpE.response.data}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
+		} catch (e) {
+			log.error "Wattvision getDataForChild General Exception: ${e}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
 		}
 	}
 }
@@ -164,9 +174,14 @@ def wattvisionURL(senorId, startDate, endDate) {
 	if (diff > 259200000) { // 3 days in milliseconds
 		// Wattvision only allows pulling 3 hours of data at a time
 		startDate = new Date(hours: endDate.hours - 3)
+	} else if (diff < 10000) { // 10 seconds in milliseconds
+		// Wattvision throws errors when the difference between start_time and end_time is 5 seconds or less
+		// So we are going to make sure that we have a few more seconds of breathing room
+		use (groovy.time.TimeCategory) {
+			startDate = endDate - 10.seconds
+		}
 	}
 
-
 	def params = [
 		"sensor_id" : senorId,
 		"api_id"    : wattvisionApiAccess.id,
@@ -480,4 +495,3 @@ def connectionSuccessful(deviceName, iconSrc) {
 
 	render contentType: 'text/html', data: html
 }
-

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -1,3 +1,5 @@
+//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
+
 /**
  *  Copyright 2015 SmartThings
  *

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -125,19 +125,19 @@
       if(allOk) {
     
       if(everyoneIsAway() && (state.sunMode == "sunrise")) {
-        log.info("Home is Empty  Setting New Away Mode")
+        log.debug("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
     
       if(everyoneIsAway() && (state.sunMode == "sunset")) {
-        log.info("Home is Empty  Setting New Away Mode")
+        log.debug("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
       
       else {
-      log.info("Home is Occupied Setting New Home Mode")
+      log.debug("Home is Occupied Setting New Home Mode")
       setHome()
     
     
@@ -152,7 +152,7 @@
         log.debug("Checking if everyone is away")
     
         if(everyoneIsAway()) {
-          log.info("Nobody is home, running away sequence")
+          log.debug("Nobody is home, running away sequence")
           def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
           runIn(delay, "setAway")
         }
@@ -161,7 +161,7 @@
     else {
     	def lastTime = state[evt.deviceId]
         if (lastTime == null || now() - lastTime >= 1 * 60000) {
-      		log.info("Someone is home, running home sequence")
+      		log.debug("Someone is home, running home sequence")
       		setHome()
         }    
     	state[evt.deviceId] = now()
@@ -175,14 +175,14 @@
       if(everyoneIsAway()) {
         if(state.sunMode == "sunset") {
           def message = "Performing \"${awayNight}\" for you as requested."
-          log.info(message)
+          log.debug(message)
           sendAway(message)
           location.helloHome.execute(settings.awayNight)
         }
         
         else if(state.sunMode == "sunrise") {
           def message = "Performing \"${awayDay}\" for you as requested."
-          log.info(message)
+          log.debug(message)
           sendAway(message)
           location.helloHome.execute(settings.awayDay)
           }
@@ -192,19 +192,19 @@
       }
     
       else {
-        log.info("Somebody returned home before we set to '${newAwayMode}'")
+        log.debug("Somebody returned home before we set to '${newAwayMode}'")
       }
     }
     
     //set home mode when house is occupied
     def setHome() {
     sendOutOfDateNotification()
-    log.info("Setting Home Mode!!")
+    log.debug("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
           if (location.mode != "${homeModeNight}"){
           def message = "Performing \"${homeNight}\" for you as requested."
-            log.info(message)
+            log.debug(message)
             sendHome(message)
             location.helloHome.execute(settings.homeNight)
             }
@@ -213,7 +213,7 @@
           if(state.sunMode == "sunrise"){
           if (location.mode != "${homeModeDay}"){
           def message = "Performing \"${homeDay}\" for you as requested."
-            log.info(message)
+            log.debug(message)
             sendHome(message)
             location.helloHome.execute(settings.homeDay)
                 }
@@ -329,4 +329,4 @@
         	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
         	state.lastTime = (new Date() + 31).getTime()
         }
-    }
+    }