MSA-1969: OpenGarage (https://opengarage.io/) is a garage door opener which will open/close your garage door and monitor its status. The device handler is a simple interface to the REST service provided by OpenGarage to both open/close and the status of the door.

[DVCSMP-2607] Standardize remaining SmartThingsPublic DTH colors

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -38,9 +38,9 @@ metadata {
     tiles (scale: 2){      
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
 				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
@@ -52,20 +52,20 @@ metadata {
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
 			backgroundColors:[
-				[value: 0,  color: "#1010ff"], // blue=cold
-				[value: 65, color: "#a0a0f0"],
-				[value: 70, color: "#e0e050"],
-				[value: 75, color: "#f0d030"], // yellow
-				[value: 80, color: "#fbf020"],
-				[value: 85, color: "#fbdc01"],
-				[value: 90, color: "#fb3a01"],
-				[value: 95, color: "#fb0801"]  // red=hot
+				[value: 0,  color: "#153591"], // blue=cold
+				[value: 65, color: "#44b621"], // green
+				[value: 70, color: "#44b621"], // green
+				[value: 75, color: "#f1d801"], // yellow
+				[value: 80, color: "#f1d801"], // yellow
+				[value: 85, color: "#f1d801"], // yellow
+				[value: 90, color: "#d04e00"], // red
+				[value: 95, color: "#bc2323"]  // red=hot
 			]
 		}
 

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -34,8 +34,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -95,12 +95,12 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
 			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 			} 
@@ -135,13 +135,13 @@ metadata {
     	}        
         
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
         
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
         
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
         
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
         

devicetypes/littlegumsmarthome/opengarage-io-handler.src/opengarage-io-handler.groovy

@@ -0,0 +1,212 @@
+/**
+ *  Copyright 2017 Ian Lindsay
+ *
+ *  Code snippets taken from Tim Slagle
+ *  https://community.smartthings.com/u/tslagle13
+ *  here:
+ *  https://community.smartthings.com/t/generic-camera-device-using-local-connection-new-version-now-available/3269/75?u=l0kiscot
+ *
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+preferences {
+  input("devicekey", "text",     title: "Device Key",   description: "Your OpenGarage.io device key")
+  input("ipadd",       "text",     title: "IP address", description: "The IP address of your OpenGarage.io unit")
+  input("port",     "text",     title: "Port",       description: "The port of your OpenGarage.io unit")
+}
+
+metadata {
+  definition (name: "OpenGarage.io Handler", namespace: "littlegumSmartHome", author: "Ian Lindsay") {
+		capability "Door Control"
+		capability "Garage Door Control"
+		capability "Refresh"
+	}
+
+	tiles (scale: 2){
+        standardTile("garagedoor", "device.garagedoor", width: 6, height: 4) {
+  			state "open", label: '${name}', action: "close", icon: "st.doors.garage.garage-open", backgroundColor: "#e54444"
+  			state "closed", label: '${name}', action: "open", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 6, height: 2) {
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+		}
+
+		main("garagedoor")
+		details(["garagedoor", "refresh"])
+	}
+    simulator {
+        // simulator metadata
+    }
+}
+
+def installed() {
+    initialize()
+}
+
+def initialize() {
+	log.debug "initialize triggered"
+    // initialize state
+    state.doorStatus =  1 // 1 means open, 0 means closed
+	api("getstatus", [])
+}
+
+def open() {
+    log.debug "Executing 'close'"
+    api("openclose", [])
+}
+
+def close() {
+	log.debug "Executing 'close'"
+    api("openclose", [])
+}
+
+def refresh() {
+	log.debug "Refreshing Values "
+    
+    api("getstatus", [])
+}
+
+def api(method, args = [], success = {}) {
+  def methods = [
+    "getstatus": [gdipadd: "${ipadd}", gdport:"${port}", gdpath:"/jc", gdtype: "get"],
+    "openclose": [gdipadd: "${ipadd}", gdport:"${port}", gdpath:"/cc?dkey=${devicekey}&click=1", gdtype: "get"]
+  ]
+
+  def request = methods.getAt(method)
+
+  doRequest(request.gdipadd, request.gdport, request.gdpath, request.gdtype, success)
+}
+
+private doRequest(gdipadd, gdport, gdpath, gdtype, success) {
+  log.debug(gdipadd)
+
+  //if(type == "post") {
+  //  httpPost(uri , "", success)
+  //}
+
+  //else if(type == "get") {
+  //  httpGet(uri, success)
+  //}
+  
+    def host = gdipadd
+    def hosthex = convertIPToHex(host)
+    def porthex = Long.toHexString(Long.parseLong((gdport)))
+    if (porthex.length() < 4) { porthex = "00" + porthex }
+    
+    //log.debug "Port in Hex is $porthex"
+    //log.debug "Hosthex is : $hosthex"
+    device.deviceNetworkId = "$hosthex:$porthex" 
+    
+     //log.debug "The device id configured is: $device.deviceNetworkId"
+
+    //def path = gdpath //"/SnapshotJPEG?Resolution=640x480&Quality=Clarity"
+    log.debug "path is: $gdpath"
+    
+    def headers = [:] //"HOST:" + getHostAddress() + ""
+    headers.put("HOST", "$host:$gdport")
+  
+  try {
+        def hubAction = new physicalgraph.device.HubAction(
+        	method: method,
+        	path: gdpath,
+        	headers: headers
+            )  
+    }
+    catch (Exception e) 
+    {
+        log.debug "Hit Exception on $hubAction"
+        log.debug e
+    }
+  
+}
+
+def parse(description) {
+
+    def msg = parseLanMessage(description)
+	
+    log.debug msg
+    
+    def headersAsString = msg.header // => headers as a string
+    def headerMap = msg.headers      // => headers as a Map
+    def body = msg.body              // => request body as a string
+    def status = msg.status          // => http status code of the response
+    //def json = msg.json              // => any JSON included in response body, as a data structure of lists and maps
+    //def xml = msg.xml                // => any XML included in response body, as a document tree structure
+    //def data = msg.data              // => either JSON or XML in response body (whichever is specified by content-type header in response)
+	
+    def slurper = new groovy.json.JsonSlurper()
+ 	def json = slurper.parseText(msg.body)
+ 
+    log.debug json
+    
+    def result
+	log.debug "before state.doorStatus: $state.doorStatus"
+    
+    // open / close event
+	if(json.result){
+    	if(state.doorStatus){
+        	log.debug "door open - so closing"
+        	state.doorStatus = 0
+            result = createEvent(name: "garagedoor", value: "closed")
+        } else {
+        	log.debug "door closed - so opening"
+        	state.doorStatus = 1
+            result = createEvent(name: "garagedoor", value: "open")
+        }
+     }
+    //status update request
+    if(json.mac){
+    	if(json.door){
+        	log.debug "door is open - refreshing setting"
+        	state.doorStatus = 1
+            result = createEvent(name: "garagedoor", value: "open")
+        } else {
+        	log.debug "door is closed - refreshing setting"
+        	state.doorStatus = 0
+            result = createEvent(name: "garagedoor", value: "closed")
+        }
+    }
+    
+    log.debug "after state.doorStatus: $state.doorStatus"
+    
+    return result
+}
+
+private Long converIntToLong(ipAddress) {
+	long result = 0
+	def parts = ipAddress.split("\\.")
+    for (int i = 3; i >= 0; i--) {
+        result |= (Long.parseLong(parts[3 - i]) << (i * 8));
+    }
+
+    return result & 0xFFFFFFFF;
+}
+
+private String convertIPToHex(ipAddress) {
+	return Long.toHexString(converIntToLong(ipAddress));
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+private String convertHexToIP(hex) {
+log.debug("Convert hex to ip: $hex") //	a0 00 01 6
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+private getHostAddress() {
+	def parts = device.deviceNetworkId.split(":")
+    log.debug device.deviceNetworkId
+	def ip = convertHexToIP(parts[0])
+	def port = convertHexToInt(parts[1])
+	return ip + ":" + port
+}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,5 +282,4 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
-
+}

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -68,8 +68,8 @@
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -86,7 +86,7 @@
 		}
         standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -62,8 +62,8 @@ metadata {
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
         }
         standardTile("contact", "device.contact", inactiveLabel: false) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
         standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -44,9 +44,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -56,8 +56,8 @@ metadata {
 			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
 		}
 		standardTile("contact", "device.contact") {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -22,16 +22,16 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
 		}
 		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -25,8 +25,8 @@ metadata {
 
 	tiles(scale: 2) {
 		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#e86d13")
 		}
 		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
 		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -27,7 +27,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 		}
@@ -35,7 +35,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
@@ -59,7 +59,7 @@ metadata {
 			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "VALUE_CONTROL") {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -40,11 +40,11 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -38,11 +38,11 @@
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''
@@ -50,11 +50,11 @@
         }
 
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
         }
 
         standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -46,9 +46,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -41,9 +41,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -45,9 +45,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -49,9 +49,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

smartapps/naissan/lights-off-with-no-motion-and-presence.src/lights-off-with-no-motion-and-presence.groovy

@@ -15,66 +15,66 @@ definition(
 )
 
 preferences {
-	section("Light switches to turn off") {
-		input "switches", "capability.switch", title: "Choose light switches", multiple: true
-	}
-	section("Turn off when there is no motion and presence") {
-		input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
-   		input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
-	}
-	section("Delay before turning off") {                    
-		input "delayMins", "number", title: "Minutes of inactivity?"
-	}
+  section("Light switches to turn off") {
+    input "switches", "capability.switch", title: "Choose light switches", multiple: true
+  }
+  section("Turn off when there is no motion and presence") {
+    input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
+    input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
+  }
+  section("Delay before turning off") {
+    input "delayMins", "number", title: "Minutes of inactivity?"
+  }
 }
 
 def installed() {
-	subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  subscribe(motionSensor, "motion", motionHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def updated() {
-	unsubscribe()
-	subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  unsubscribe()
+  subscribe(motionSensor, "motion", motionHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def motionHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "inactive") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
-	}
+  log.debug "handler $evt.name: $evt.value"
+  if (evt.value == "inactive") {
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
+  }
 }
 
 def presenceHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "not present") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
-	}
+  log.debug "handler $evt.name: $evt.value"
+  if (evt.value == "not present") {
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
+  }
 }
 
 def isActivePresence() {
-	// check all the presence sensors, make sure none are present
-	def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
-	!noPresence		
+  // check all the presence sensors, make sure none are present
+  def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
+  !noPresence
 }
 
 def scheduleCheck() {
-	log.debug "scheduled check"
-	def motionState = motionSensor.currentState("motion")
+  log.debug "scheduled check"
+  def motionState = motionSensor.currentState("motion")
     if (motionState.value == "inactive") {
-        def elapsed = now() - motionState.rawDateCreated.time
-    	def threshold = 1000 * 60 * delayMins - 1000
-    	if (elapsed >= threshold) {
-        	if (!isActivePresence()) {
-            	log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
-            	switches.off()
-            } else {
-            	log.debug "Presence is active: do nothing"
-            }
-    	} else {
-        	log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
+      def elapsed = now() - motionState.rawDateCreated.time
+      def threshold = 1000 * 60 * delayMins - 1000
+      if (elapsed >= threshold) {
+        if (!isActivePresence()) {
+          log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
+          switches.off()
+        } else {
+          log.debug "Presence is active: do nothing"
         }
+      } else {
+        log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
+      }
     } else {
-    	log.debug "Motion is active: do nothing"
+      log.debug "Motion is active: do nothing"
     }
-}
+}

smartapps/smartthings/left-it-open.src/left-it-open.groovy

@@ -27,84 +27,82 @@ definition(
 
 preferences {
 
-	section("Monitor this door or window") {
-		input "contact", "capability.contactSensor"
-	}
-	section("And notify me if it's open for more than this many minutes (default 10)") {
-		input "openThreshold", "number", description: "Number of minutes", required: false
-	}
-    section("Delay between notifications (default 10 minutes") {
-        input "frequency", "number", title: "Number of minutes", description: "", required: false
+  section("Monitor this door or window") {
+    input "contact", "capability.contactSensor"
+  }
+
+  section("And notify me if it's open for more than this many minutes (default 10)") {
+    input "openThreshold", "number", description: "Number of minutes", required: false
+  }
+
+  section("Delay between notifications (default 10 minutes") {
+    input "frequency", "number", title: "Number of minutes", description: "", required: false
+  }
+
+  section("Via text message at this number (or via push notification if not specified") {
+    input("recipients", "contact", title: "Send notifications to") {
+      input "phone", "phone", title: "Phone number (optional)", required: false
     }
-	section("Via text message at this number (or via push notification if not specified") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone", "phone", title: "Phone number (optional)", required: false
-        }
-	}
+  }
 }
 
 def installed() {
-	log.trace "installed()"
-	subscribe()
+  log.trace "installed()"
+  subscribe()
 }
 
 def updated() {
-	log.trace "updated()"
-	unsubscribe()
-	subscribe()
+  log.trace "updated()"
+  unsubscribe()
+  subscribe()
 }
 
 def subscribe() {
-	subscribe(contact, "contact.open", doorOpen)
-	subscribe(contact, "contact.closed", doorClosed)
+  subscribe(contact, "contact.open", doorOpen)
+  subscribe(contact, "contact.closed", doorClosed)
 }
 
-def doorOpen(evt)
-{
-	log.trace "doorOpen($evt.name: $evt.value)"
-	def t0 = now()
-	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
-	runIn(delay, doorOpenTooLong, [overwrite: false])
-	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
+def doorOpen(evt) {
+  log.trace "doorOpen($evt.name: $evt.value)"
+  def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
+  runIn(delay, doorOpenTooLong, [overwrite: true])
 }
 
-def doorClosed(evt)
-{
-	log.trace "doorClosed($evt.name: $evt.value)"
+def doorClosed(evt) {
+  log.trace "doorClosed($evt.name: $evt.value)"
+  unschedule(doorOpenTooLong)
 }
 
 def doorOpenTooLong() {
-	def contactState = contact.currentState("contact")
-    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
+  def contactState = contact.currentState("contact")
+  def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
 
-	if (contactState.value == "open") {
-		def elapsed = now() - contactState.rawDateCreated.time
-		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
-		if (elapsed >= threshold) {
-			log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
-			sendMessage()
-            runIn(freq, doorOpenTooLong, [overwrite: false])
-		} else {
-			log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
-		}
-	} else {
-		log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
-	}
+  if (contactState.value == "open") {
+    def elapsed = now() - contactState.rawDateCreated.time
+    def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+    if (elapsed >= threshold) {
+      log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+      sendMessage()
+      runIn(freq, doorOpenTooLong, [overwrite: false])
+    } else {
+      log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+    }
+  } else {
+    log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
+  }
 }
 
-void sendMessage()
-{
-	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
-	def msg = "${contact.displayName} has been left open for ${minutes} minutes."
-	log.info msg
-    if (location.contactBookEnabled) {
-        sendNotificationToContacts(msg, recipients)
-    }
-    else {
-        if (phone) {
-            sendSms phone, msg
-        } else {
-            sendPush msg
-        }
+void sendMessage() {
+  def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
+  def msg = "${contact.displayName} has been left open for ${minutes} minutes."
+  log.info msg
+  if (location.contactBookEnabled) {
+    sendNotificationToContacts(msg, recipients)
+  } else {
+    if (phone) {
+      sendSms phone, msg
+    } else {
+      sendPush msg
     }
+  }
 }