MSA-986: 버튼/이온 LED 전구

devicetypes/smartthings/aeon-led-bulb.src/aeon-led-bulb.groovy

@@ -1,254 +1,254 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Aeon RGBW LED Bulb
- *
- *  Author: SmartThings
- *  Date: 2015-7-12
- */
-
-metadata {
-	definition (name: "Aeon LED Bulb", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Color Control"
-		capability "Color Temperature"
-		capability "Switch"
-		capability "Refresh"
-		capability "Actuator"
-		capability "Sensor"
-
-		command "reset"
-
-		fingerprint inClusters: "0x26,0x33,0x98"
-		fingerprint deviceId: "0x11", inClusters: "0x98,0x33"
-		fingerprint deviceId: "0x1102", inClusters: "0x98"
-	}
-
-	simulator {
-	}
-
-	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-		state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-	}
-	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
-	}
-	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-	}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-		state "level", action:"switch level.setLevel"
-	}
-	controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-		state "color", action:"setColor"
-	}
-	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		state "level", label: 'Level ${currentValue}%'
-	}
-	controlTile("colorTempControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "colorTemperature", action:"setColorTemperature"
-	}
-	valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
-		state "hue", label: 'Hue ${currentValue}   '
-	}
-
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "reset", "colorTempControl", "refresh"])
-}
-
-def updated() {
-	response(refresh())
-}
-
-def parse(description) {
-	def result = null
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x33:3])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-			log.debug("'$description' parsed to $result")
-		} else {
-			log.debug("Couldn't zwave.parse '$description'")
-		}
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
-	dimmerEvents(cmd)
-}
-
-private dimmerEvents(physicalgraph.zwave.Command cmd) {
-	def value = (cmd.value ? "on" : "off")
-	def result = [createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")]
-	if (cmd.value) {
-		result << createEvent(name: "level", value: cmd.value, unit: "%")
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	response(command(zwave.switchMultilevelV1.switchMultilevelGet()))
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x84: 1])
-	if (encapsulatedCommand) {
-		state.sec = 1
-		def result = zwaveEvent(encapsulatedCommand)
-		result = result.collect {
-			if (it instanceof physicalgraph.device.HubAction && !it.toString().startsWith("9881")) {
-				response(cmd.CMD + "00" + it.toString())
-			} else {
-				it
-			}
-		}
-		result
-	}
-}
-
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	def linkText = device.label ?: device.name
-	[linkText: linkText, descriptionText: "$linkText: $cmd", displayed: false]
-}
-
-def on() {
-	command(zwave.basicV1.basicSet(value: 0xFF))
-}
-
-def off() {
-	command(zwave.basicV1.basicSet(value: 0x00))
-}
-
-def setLevel(level) {
-	setLevel(level, 1)
-}
-
-def setLevel(level, duration) {
-	if(level > 99) level = 99
-	command(zwave.switchMultilevelV3.switchMultilevelSet(value: level, dimmingDuration: duration))
-}
-
-def refresh() {
-	commands([
-		zwave.switchMultilevelV1.switchMultilevelGet(),
-	], 1000)
-}
-
-def setSaturation(percent) {
-	log.debug "setSaturation($percent)"
-	setColor(saturation: percent)
-}
-
-def setHue(value) {
-	log.debug "setHue($value)"
-	setColor(hue: value)
-}
-
-def setColor(value) {
-	def result = []
-	log.debug "setColor: ${value}"
-	if (value.hex) {
-		def c = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
-		result << zwave.switchColorV3.switchColorSet(red:c[0], green:c[1], blue:c[2], warmWhite:0, coldWhite:0)
-	} else {
-		def hue = value.hue ?: device.currentValue("hue")
-		def saturation = value.saturation ?: device.currentValue("saturation")
-		if(hue == null) hue = 13
-		if(saturation == null) saturation = 13
-		def rgb = huesatToRGB(hue, saturation)
-		result << zwave.switchColorV3.switchColorSet(red: rgb[0], green: rgb[1], blue: rgb[2], warmWhite:0, coldWhite:0)
-	}
-
-	if(value.hue) sendEvent(name: "hue", value: value.hue)
-	if(value.hex) sendEvent(name: "color", value: value.hex)
-	if(value.switch) sendEvent(name: "switch", value: value.switch)
-	if(value.saturation) sendEvent(name: "saturation", value: value.saturation)
-
-	commands(result)
-}
-
-def setColorTemperature(percent) {
-	if(percent > 99) percent = 99
-	int warmValue = percent * 255 / 99
-	command(zwave.switchColorV3.switchColorSet(red:0, green:0, blue:0, warmWhite:warmValue, coldWhite:(255 - warmValue)))
-}
-
-def reset() {
-	log.debug "reset()"
-	sendEvent(name: "color", value: "#ffffff")
-	setColorTemperature(99)
-}
-
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec != 0) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
-}
-
-def rgbToHSV(red, green, blue) {
-	float r = red / 255f
-	float g = green / 255f
-	float b = blue / 255f
-	float max = [r, g, b].max()
-	float delta = max - [r, g, b].min()
-	def hue = 13
-	def saturation = 0
-	if (max && delta) {
-		saturation = 100 * delta / max
-		if (r == max) {
-			hue = ((g - b) / delta) * 100 / 6
-		} else if (g == max) {
-			hue = (2 + (b - r) / delta) * 100 / 6
-		} else {
-			hue = (4 + (r - g) / delta) * 100 / 6
-		}
-	}
-	[hue: hue, saturation: saturation, value: max * 100]
-}
-
-def huesatToRGB(float hue, float sat) {
-	while(hue >= 100) hue -= 100
-	int h = (int)(hue / 100 * 6)
-	float f = hue / 100 * 6 - h
-	int p = Math.round(255 * (1 - (sat / 100)))
-	int q = Math.round(255 * (1 - (sat / 100) * f))
-	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
-	switch (h) {
-		case 0: return [255, t, p]
-		case 1: return [q, 255, p]
-		case 2: return [p, 255, t]
-		case 3: return [p, q, 255]
-		case 4: return [t, p, 255]
-		case 5: return [255, p, q]
-	}
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Aeon RGBW LED Bulb
+ *
+ *  Author: SmartThings
+ *  Date: 2015-7-12
+ */
+
+metadata {
+	definition (name: "Aeon LED Bulb", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Switch"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+		command "reset"
+
+		fingerprint inClusters: "0x26,0x33,0x98"
+		fingerprint deviceId: "0x11", inClusters: "0x98,0x33"
+		fingerprint deviceId: "0x1102", inClusters: "0x98"
+	}
+
+	simulator {
+	}
+
+	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+		state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+	}
+	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {
+		state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+	}
+	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+	}
+	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+		state "level", action:"switch level.setLevel"
+	}
+	controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+		state "color", action:"setColor"
+	}
+	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+		state "level", label: 'Level ${currentValue}%'
+	}
+	controlTile("colorTempControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false) {
+		state "colorTemperature", action:"setColorTemperature"
+	}
+	valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+		state "hue", label: 'Hue ${currentValue}   '
+	}
+
+	main(["switch"])
+	details(["switch", "levelSliderControl", "rgbSelector", "reset", "colorTempControl", "refresh"])
+}
+
+def updated() {
+	response(refresh())
+}
+
+def parse(description) {
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x33:3])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+			log.debug("'$description' parsed to $result")
+		} else {
+			log.debug("Couldn't zwave.parse '$description'")
+		}
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")]
+	if (cmd.value) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	response(command(zwave.switchMultilevelV1.switchMultilevelGet()))
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x84: 1])
+	if (encapsulatedCommand) {
+		state.sec = 1
+		def result = zwaveEvent(encapsulatedCommand)
+		result = result.collect {
+			if (it instanceof physicalgraph.device.HubAction && !it.toString().startsWith("9881")) {
+				response(cmd.CMD + "00" + it.toString())
+			} else {
+				it
+			}
+		}
+		result
+	}
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	def linkText = device.label ?: device.name
+	[linkText: linkText, descriptionText: "$linkText: $cmd", displayed: false]
+}
+
+def on() {
+	command(zwave.basicV1.basicSet(value: 0xFF))
+}
+
+def off() {
+	command(zwave.basicV1.basicSet(value: 0x00))
+}
+
+def setLevel(level) {
+	setLevel(level, 1)
+}
+
+def setLevel(level, duration) {
+	if(level > 99) level = 99
+	command(zwave.switchMultilevelV3.switchMultilevelSet(value: level, dimmingDuration: duration))
+}
+
+def refresh() {
+	commands([
+		zwave.switchMultilevelV1.switchMultilevelGet(),
+	], 1000)
+}
+
+def setSaturation(percent) {
+	log.debug "setSaturation($percent)"
+	setColor(saturation: percent)
+}
+
+def setHue(value) {
+	log.debug "setHue($value)"
+	setColor(hue: value)
+}
+
+def setColor(value) {
+	def result = []
+	log.debug "setColor: ${value}"
+	if (value.hex) {
+		def c = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+		result << zwave.switchColorV3.switchColorSet(red:c[0], green:c[1], blue:c[2], warmWhite:0, coldWhite:0)
+	} else {
+		def hue = value.hue ?: device.currentValue("hue")
+		def saturation = value.saturation ?: device.currentValue("saturation")
+		if(hue == null) hue = 13
+		if(saturation == null) saturation = 13
+		def rgb = huesatToRGB(hue, saturation)
+		result << zwave.switchColorV3.switchColorSet(red: rgb[0], green: rgb[1], blue: rgb[2], warmWhite:0, coldWhite:0)
+	}
+
+	if(value.hue) sendEvent(name: "hue", value: value.hue)
+	if(value.hex) sendEvent(name: "color", value: value.hex)
+	if(value.switch) sendEvent(name: "switch", value: value.switch)
+	if(value.saturation) sendEvent(name: "saturation", value: value.saturation)
+
+	commands(result)
+}
+
+def setColorTemperature(percent) {
+	if(percent > 99) percent = 99
+	int warmValue = percent * 255 / 99
+	command(zwave.switchColorV3.switchColorSet(red:0, green:0, blue:0, warmWhite:warmValue, coldWhite:(255 - warmValue)))
+}
+
+def reset() {
+	log.debug "reset()"
+	sendEvent(name: "color", value: "#ffffff")
+	setColorTemperature(99)
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec != 0) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def rgbToHSV(red, green, blue) {
+	float r = red / 255f
+	float g = green / 255f
+	float b = blue / 255f
+	float max = [r, g, b].max()
+	float delta = max - [r, g, b].min()
+	def hue = 13
+	def saturation = 0
+	if (max && delta) {
+		saturation = 100 * delta / max
+		if (r == max) {
+			hue = ((g - b) / delta) * 100 / 6
+		} else if (g == max) {
+			hue = (2 + (b - r) / delta) * 100 / 6
+		} else {
+			hue = (4 + (r - g) / delta) * 100 / 6
+		}
+	}
+	[hue: hue, saturation: saturation, value: max * 100]
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -1,4 +1,6 @@
-/**
+private hideOptionsSection() {
+	(starting || ending || days || modes) ? false : true
+}/**
  *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -313,10 +315,8 @@ private hhmm(time, fmt = "h:mm a")
 	f.format(t)
 }
 
-private hideOptionsSection() {
-	(starting || ending || days || modes) ? false : true
-}
+
 
 private timeIntervalLabel() {
 	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
-}
+}