MSA-1626: Complete integration for all Tado Heating & Cooling products with SmartThings, this release includes discovery for the Tado Smart Thermostat, Smart Radiator Thermostat, Extension Kit & Smart AC Control Units

Rolling down staging hotfix to master

README.md

@@ -1,10 +1,10 @@
-# SmartThings Public Github Repo
+# SmartThings Public GitHub Repo
 
 An official list of SmartApps and Device Types from SmartThings.
 
 Here are some links to help you get started coding right away:
 
-* [Github-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
+* [GitHub-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
 * [Full Documentation](http://docs.smartthings.com)
 * [IDE & Simulator](http://ide.smartthings.com)
 * [Community Forums](http://community.smartthings.com)

devicetypes/fuzzysb/tado-cooling-thermostat.src/tado-cooling-thermostat.groovy

@@ -0,0 +1,600 @@
+/**
+ *  Copyright 2015 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Tado AC Thermostat
+ *
+ *	Author: Stuart Buchanan, Based on original work by Ian M with thanks. also source for icons was from @tonesto7's excellent Nest Manager.
+ *	Date: 2016-11-28 v3.0 Moved all data collection functions into Tado (Connect) SmartApp, huge changes to device handler, existing devices and handler will need to be uninstalled before installing this version
+ *	Date: 2016-07-13 v2.9 Quick dirty workaround to control zones with a single account.
+ *	Date: 2016-05-07 v2.8 Corrected issue with Fan Speed commands not working.
+ *	Date: 2016-04-25 v2.7 Minor changes to thermostatOperatingState to Show "idle" and "fan only" state
+ *	Date: 2016-04-25 v2.6 Minor bug fix to correct issue with reading existing set point value.
+ *	Date: 2016-04-09 v2.5 Major bug fix exercise, found lots and lots and lots.....now 100% conforms to ST Thermostat capability. main panel now shows colour of operating state. new attributes tadoMode and tadoFanSpeed created.
+ *	Date: 2016-04-05 v2.4 Performed Testing with Thermostat Mode Director and found some deficiencies where this would not work correctly. i have now corrected, this now works fine and has been tested.
+ *	Date: 2016-04-05 v2.3 added device preference for default temps for some commands as requested by @mitchell_lu66, also added some additional refreshes and error control for unsupported capabilities
+ *	Date: 2016-04-05 v2.2 Added Fan Speed & Emergency Heat (1 Hour) Controls and also a manual Mode End function to fall back to Tado Control.
+ 						  Also added preference for how long manual mode runs for either ends at Tado Mode Change (TADO_MODE) or User Control (MANUAL),
+                          please ensure the default method is Set in the device properties
+ *	Date: 2016-04-05 v2.1 Minor Bug Fixes & improved Icons
+ *	Date: 2016-04-05 v2.0 Further Changes to MultiAttribute Tile
+ *	Date: 2016-04-05 v1.9 Amended Device Handler Name
+ *	Date: 2016-04-05 v1.8 Added all thermostat related capabilities
+ *  Date: 2016-04-05 v1.7 Amended device to be capable of both Fahrenheit and celsius and amended the Device multiattribute tile
+ *  Date: 2016-04-05 v1.6 switched API calls to new v2 calls as the old ones had been deprecated.
+ *  Date: 2016-02-21 v1.5 switched around thermostatOperatingState & thermostatMode to get better compatibility with Home Remote
+ *  Date: 2016-02-21 v1.4 added HeatingSetPoint & CoolingSetPoint to make compatible with SmartTiles
+ *  Date: 2016-02-21 v1.3 amended the read thermostat properties to match the ST Thermostat Capability
+ *  Date: 2016-02-14 v1.2 amended the thermostat properties to match the ST Capability.Thermostat values
+ *  Date: 2016-01-23 v1.1 fixed error in Tado Mode detection
+ *	Date: 2016-01-22 v1.1 Add Heating & Cooling Controls (initial offering, will need to look into adding all possible commands)
+ *	Date: 2015-12-04 v1.0 Initial Release With Temperatures & Relative Humidity
+ */
+
+import groovy.json.JsonOutput
+
+preferences {
+}
+
+metadata {
+	definition (name: "Tado Cooling Thermostat", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Actuator"
+    capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Fan Mode"
+		capability "Thermostat Setpoint"
+		capability "Thermostat Operating State"
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+		capability "Polling"
+		capability "Refresh"
+
+    attribute "tadoMode", "string"
+    attribute "tadoFanSpeed", "string"
+    command "temperatureUp"
+    command "temperatureDown"
+    command "heatingSetpointUp"
+    command "heatingSetpointDown"
+    command "coolingSetpointUp"
+    command "coolingSetpointDown"
+    command "cmdFanSpeedAuto"
+    command "cmdFanSpeedHigh"
+    command "cmdFanSpeedMid"
+    command "cmdFanSpeedLow"
+    command "dry"
+    command "on"
+		command "fan"
+    command "endManualControl"
+    command "emergencyHeat"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+
+		// reply messages
+	}
+
+	tiles(scale: 2){
+    multiAttributeTile(name: "thermostat", type:"thermostat", width:6, height:4) {
+      tileAttribute("device.temperature", key:"PRIMARY_CONTROL", canChangeIcon: true, canChangeBackground: true){
+        attributeState "default", label:'${currentValue}°', backgroundColor:"#fab907", icon:"st.Home.home1"
+      }
+      tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+        attributeState("VALUE_UP", action: "temperatureUp")
+        attributeState("VALUE_DOWN", action: "temperatureDown")
+      }
+      tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+        attributeState("default", label:'${currentValue}%', unit:"%")
+      }
+      tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+        attributeState("idle", backgroundColor:"#666666")
+        attributeState("heating", backgroundColor:"#ff471a")
+        attributeState("cooling", backgroundColor:"#1a75ff")
+        attributeState("emergency heat", backgroundColor:"#ff471a")
+        attributeState("drying", backgroundColor:"#c68c53")
+        attributeState("fan only", backgroundColor:"#39e600")
+        attributeState("heating|cooling", backgroundColor:"#ff9900")
+      }
+      tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+        attributeState("off", label:'${name}')
+        attributeState("heat", label:'${name}')
+        attributeState("cool", label:'${name}')
+        attributeState("auto", label:'${name}')
+        attributeState("fan", label:'${name}')
+        attributeState("dry", label:'${name}')
+      }
+      tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+        attributeState("default", label:'${currentValue}', unit:"dF")
+      }
+      tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+        attributeState("default", label:'${currentValue}', unit:"dF")
+      }
+    }
+
+    standardTile("tadoMode", "device.tadoMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+      state("SLEEP", label:'${name}', backgroundColor:"#0164a8", icon:"st.Bedroom.bedroom2")
+      state("HOME", label:'${name}', backgroundColor:"#fab907", icon:"st.Home.home2")
+      state("AWAY", label:'${name}', backgroundColor:"#62aa12", icon:"st.Outdoor.outdoor18")
+      state("OFF", label:'${name}', backgroundColor:"#ffffff", icon:"st.switches.switch.off", defaultState: true)
+      state("MANUAL", label:'${name}', backgroundColor:"#804000", icon:"st.Weather.weather1")
+    }
+
+    standardTile("refresh", "device.switch", inactiveLabel: false, width: 2, height: 1, decoration: "flat") {
+      state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+    }
+
+    standardTile("thermostatMode", "device.thermostatMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+      state("heat", label:'HEAT', backgroundColor:"#ea2a2a", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/heat_mode_icon.png")
+      state("emergency heat", label:'HEAT', backgroundColor:"#ea2a2a", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/heat_mode_icon.png")
+      state("cool", label:'COOL', backgroundColor:"#089afb", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/cool_mode_icon.png")
+      state("dry", label:'DRY', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/dry_mode_icon.png")
+      state("fan", label:'FAN', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_mode_icononly.png")
+      state("auto", label:'AUTO', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/auto_mode_icon.png")
+      state("off", label:'', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_off.png", defaultState: true)
+		}
+
+		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 2, height: 1, decoration: "flat") {
+			state "default", label: 'Set Point\r\n\${currentValue}°'
+		}
+
+    valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 1, decoration: "flat") {
+			state "default", label: 'Set Point\r\n\${currentValue}°'
+		}
+
+    valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 1, decoration: "flat") {
+			state "default", label: 'Set Point\r\n\${currentValue}°'
+		}
+
+		valueTile("outsidetemperature", "device.outsidetemperature", width: 2, height: 1, decoration: "flat") {
+			state "outsidetemperature", label: 'Outside Temp\r\n${currentValue}°'
+		}
+
+		standardTile("tadoFanSpeed", "device.tadoFanSpeed", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true, decoration: "flat") {
+      state("OFF", label:'', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_off_icon.png", defaultState: true)
+      state("AUTO", label:'', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_auto_icon.png")
+      state("HIGH", label:'', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_high_icon.png")
+      state("MIDDLE", label:'', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_med_icon.png")
+      state("LOW", label:'', icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_low_icon.png")
+		}
+
+		standardTile("setAuto", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.auto", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_auto.png"
+		}
+    standardTile("setDry", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"dry", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_dry.png"
+		}
+    standardTile("setOn", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"on", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_on.png"
+		}
+    standardTile("setOff", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.off", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_off.png"
+		}
+    standardTile("cool", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.cool", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_cool.png"
+		}
+    standardTile("heat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.heat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/hvac_heat.png"
+		}
+    standardTile("emergencyHeat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.emergencyHeat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/emergencyHeat.png"
+		}
+    standardTile("fan", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.fan", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_mode_icon.png"
+		}
+    standardTile("coolingSetpointUp", "device.coolingSetpoint", canChangeIcon: false, decoration: "flat") {
+      state "coolingSetpointUp", label:'  ', action:"coolingSetpointUp", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/cool_arrow_up.png"
+    }
+		standardTile("coolingSetpointDown", "device.coolingSetpoint", canChangeIcon: false, decoration: "flat") {
+      state "coolingSetpointDown", label:'  ', action:"coolingSetpointDown", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/cool_arrow_down.png"
+    }
+		standardTile("heatingSetpointUp", "device.heatingSetpoint", canChangeIcon: false, decoration: "flat") {
+      state "heatingSetpointUp", label:'  ', action:"heatingSetpointUp", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/heat_arrow_up.png"
+    }
+    standardTile("heatingSetpointDown", "device.heatingSetpoint", canChangeIcon: false, decoration: "flat") {
+      state "heatingSetpointDown", label:'  ', action:"heatingSetpointDown", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/heat_arrow_down.png"
+    }
+		standardTile("cmdFanSpeedAuto", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+      state("default", label:'', action:"cmdFanSpeedAuto",  icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_auto_icon.png")
+    }
+    standardTile("cmdFanSpeedHigh", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+      state("default", label:'', action:"cmdFanSpeedHigh",  icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_high_icon.png")
+    }
+    standardTile("cmdFanSpeedMid", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+      state("default", label:'', action:"cmdFanSpeedMid",  icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_med_icon.png")
+    }
+    standardTile("cmdFanSpeedLow", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+      state("default", label:'', action:"cmdFanSpeedLow",  icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/fan_low_icon.png")
+    }
+		standardTile("endManualControl", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+      state("default", label:'', action:"endManualControl", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado-Cooling-AC.src/Images/endManual.png")
+		}
+
+		main(["thermostat"])
+		details(["thermostat","thermostatMode","coolingSetpointUp","coolingSetpointDown","autoOperation","heatingSetpointUp","heatingSetpointDown","outsidetemperature","thermostatSetpoint","tadoMode","refresh","tadoFanSpeed","setAuto","setOn","setOff","fan","cool","heat","setDry","cmdFanSpeedAuto","emergencyHeat","endManualControl","cmdFanSpeedLow","cmdFanSpeedMid","cmdFanSpeedHigh"])
+  }
+}
+
+def setCapabilitytadoType(value){
+  state.tadoType = value
+  log.debug("state.tadoType = ${state.tadoType}")
+}
+
+def getCapabilitytadoType() {
+  def map = null
+  map = [name: "capabilityTadoType", value: state.tadoType]
+  return map
+}
+
+def setCapabilitySupportsAuto(value){
+  state.supportsAuto = value
+  log.debug("state.supportsAuto = ${state.supportsAuto}")
+}
+
+def getCapabilitySupportsAuto() {
+  def map = null
+  map = [name: "capabilitySupportsAuto", value: state.supportsAuto]
+  return map
+}
+
+def setCapabilitySupportsCool(value){
+  state.supportsCool = value
+  log.debug("state.supportsCool = ${state.supportsCool}")
+}
+
+def getCapabilitySupportsCool() {
+  def map = null
+  map = [name: "capabilitySupportsCool", value: state.supportsCool]
+  return map
+}
+
+def setCapabilitySupportsCoolAutoFanSpeed(value){
+  state.SupportsCoolAutoFanSpeed = value
+  log.debug("state.SupportsCoolAutoFanSpeed = ${state.SupportsCoolAutoFanSpeed}")
+}
+
+def getCapabilitySupportsCoolAutoFanSpeed() {
+  def map = null
+  map = [name: "capabilitySupportsCoolAutoFanSpeed", value: state.supportsCoolAutoFanSpeed]
+  return map
+}
+
+def setCapabilitySupportsDry(value){
+  state.supportsDry = value
+  log.debug("state.supportsDry = ${state.supportsDry}")
+}
+
+def getCapabilitySupportsDry() {
+  def map = null
+  map = [name: "capabilitySupportsDry", value: state.supportsDry]
+  return map
+}
+
+def setCapabilitySupportsFan(value){
+  state.supportsFan = value
+  log.debug("state.supportsFan = ${state.supportsFan}")
+}
+
+def getCapabilitySupportsFan() {
+  def map = null
+  map = [name: "capabilitySupportsFan", value: state.supportsFan]
+  return map
+}
+
+def setCapabilitySupportsHeat(value){
+  state.supportsHeat = value
+  log.debug("state.supportsHeat = ${state.supportsHeat}")
+}
+
+def getCapabilitySupportsHeat() {
+  def map = null
+  map = [name: "capabilitySupportsHeat", value: state.supportsHeat]
+  return map
+}
+
+def setCapabilitySupportsHeatAutoFanSpeed(value){
+  state.SupportsHeatAutoFanSpeed = value
+  log.debug("state.SupportsHeatAutoFanSpeed = ${state.SupportsHeatAutoFanSpeed}")
+}
+
+def getCapabilitySupportsHeatAutoFanSpeed() {
+  def map = null
+  map = [name: "capabilitySupportsHeatAutoFanSpeed", value: state.SupportsHeatAutoFanSpeed]
+  return map
+}
+
+def setCapabilityMaxCoolTemp(value){
+  state.MaxCoolTemp = value
+  log.debug("set state.MaxCoolTemp to : " + state.MaxCoolTemp)
+}
+
+def getCapabilityMaxCoolTemp() {
+  def map = null
+  map = [name: "capabilityMaxCoolTemp", value: state.MaxCoolTemp]
+  return map
+}
+
+def setCapabilityMinCoolTemp(value){
+  state.MinCoolTemp = value
+  log.debug("set state.MinCoolTemp to : " + state.MinCoolTemp)
+}
+
+def getCapabilityMinCoolTemp() {
+  def map = null
+  map = [name: "capabilityMinCoolTemp", value: state.MinCoolTemp]
+  return map
+}
+
+def setCapabilityMaxHeatTemp(value){
+  state.MaxHeatTemp = value
+  log.debug("set state.MaxHeatTemp to : " + state.MaxHeatTemp)
+}
+
+def getCapabilityMaxHeatTemp() {
+  def map = null
+  map = [name: "capabilityMaxHeatTemp", value: state.MaxHeatTemp]
+  return map
+}
+
+def setCapabilityMinHeatTemp(value){
+  state.MinHeatTemp = value
+  log.debug("set state.MinHeatTemp to : " + state.MinHeatTemp)
+}
+
+def getCapabilityMinHeatTemp() {
+  def map = null
+  map = [name: "capabilityMinHeatTemp", value: state.MinHeatTemp]
+  return map
+}
+
+def updated(){
+	refresh()
+}
+
+def installed(){
+  refresh()
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	refresh()
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+    parent.statusCommand(this)
+    getWeather()
+}
+
+def getWeather(){
+	parent.weatherStatusCommand(this)
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	parent.autoCommand(this)
+  parent.statusCommand(this)
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	parent.onCommand(this)
+  parent.statusCommand(this)
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	parent.offCommand(this)
+  parent.statusCommand(this)
+}
+
+def dry() {
+	log.debug "Executing 'dry'"
+	parent.dryCommand(this)
+  parent.statusCommand(this)
+}
+
+def setThermostatMode(requiredMode){
+	switch (requiredMode) {
+    	case "dry":
+        	dry()
+        break
+    	case "heat":
+        	heat()
+        break
+        case "cool":
+        	cool()
+        break
+        case "auto":
+        	auto()
+        break
+        case "fan":
+        	fan()
+        break
+		case "off":
+        	off()
+        break
+		case "emergency heat":
+        	emergencyHeat()
+        break
+     }
+}
+
+def thermostatFanMode(requiredMode){
+	switch (requiredMode) {
+    	case "auto":
+        	fan()
+        break
+    	case "on":
+        	fan()
+        break
+        case "circulate":
+        	fan()
+        break
+     }
+}
+
+def setHeatingSetpoint(targetTemperature) {
+	log.debug "Executing 'setHeatingSetpoint'"
+  log.debug "Target Temperature ${targetTemperature}"
+  parent.setHeatingTempCommand(this,targetTemperature)
+	refresh()
+}
+
+def temperatureUp(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointUp()
+    } else if (device.currentValue("thermostatMode") == "cool") {
+    	coolingSetpointUp()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def temperatureDown(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointDown()
+    } else if (device.currentValue("thermostatMode") == "cool") {
+    	coolingSetpointDown()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def heatingSetpointUp(){
+	def capabilitysupported = state.supportsHeat
+    if (capabilitysupported == "true"){
+		log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+    	if ((device.currentValue("thermostatSetpoint").toInteger() - 1 ) < state.MinHeatTemp){
+    		log.debug("cannot decrease heat setpoint, its already at the minimum level of " + state.MinHeatTemp)
+    	} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() + 1
+			log.debug "Setting heatingSetpoint up to: ${newSetpoint}"
+			setHeatingSetpoint(newSetpoint)
+    	}
+    } else {
+    	log.debug("Sorry Heat Capability not supported by your HVAC Device")
+    }
+}
+
+def heatingSetpointDown(){
+	def capabilitysupported = state.supportsHeat
+    if (capabilitysupported == "true"){
+		log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+    	if ((device.currentValue("thermostatSetpoint").toInteger() + 1 ) > state.MaxHeatTemp){
+    		log.debug("cannot increase heat setpoint, its already at the maximum level of " + state.MaxHeatTemp)
+    	} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() - 1
+			log.debug "Setting heatingSetpoint down to: ${newSetpoint}"
+			setHeatingSetpoint(newSetpoint)
+    	}
+    } else {
+    	log.debug("Sorry Heat Capability not supported by your HVAC Device")
+    }
+}
+
+def setCoolingSetpoint(targetTemperature) {
+	log.debug "Executing 'setCoolingSetpoint'"
+  log.debug "Target Temperature ${targetTemperature}"
+  parent.setCoolingTempCommand(this,targetTemperature)
+	refresh()
+}
+
+def coolingSetpointUp(){
+	def capabilitysupported = state.supportsCool
+    if (capabilitysupported == "true"){
+		log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+    	if ((device.currentValue("thermostatSetpoint").toInteger() + 1 ) > state.MaxCoolTemp){
+    		log.debug("cannot increase cool setpoint, its already at the maximum level of " + state.MaxCoolTemp)
+    	} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() + 1
+			log.debug "Setting coolingSetpoint up to: ${newSetpoint}"
+			setCoolingSetpoint(newSetpoint)
+    	}
+    } else {
+    	log.debug("Sorry Cool Capability not supported by your HVAC Device")
+    }
+}
+
+def coolingSetpointDown(){
+	def capabilitysupported = state.supportsCool
+    if (capabilitysupported == "true"){
+		log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+    	if ((device.currentValue("thermostatSetpoint").toInteger() - 1 ) < state.MinCoolTemp){
+    		log.debug("cannot decrease cool setpoint, its already at the minimum level of " + state.MinCoolTemp)
+    	} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() - 1
+			log.debug "Setting coolingSetpoint down to: ${newSetpoint}"
+			setCoolingSetpoint(newSetpoint)
+    	}
+    } else {
+    	log.debug("Sorry Cool Capability not supported by your HVAC Device")
+    }
+}
+
+def fanOn(){
+	fan()
+}
+
+def fanCirculate(){
+	fan()
+}
+
+def cool(){
+	def capabilitysupported = state.supportsCool
+  if (capabilitysupported == "true"){
+		parent.coolCommand(this)
+    parent.statusCommand(this)
+	} else {
+    	log.debug("Sorry Cool Capability not supported by your HVAC Device")
+    }
+}
+
+def heat(){
+	def capabilitysupported = state.supportsHeat
+	if (capabilitysupported == "true"){
+	parent.heatCommand(this)
+  parent.statusCommand(this)
+  } else {
+  	log.debug("Sorry Heat Capability not supported by your HVAC Device")
+  }
+}
+
+def fan(){
+	parent.fanAuto(this)
+	refresh()
+}
+
+def emergencyHeat(){
+	parent.emergencyHeat(this)
+}
+
+def cmdFanSpeedAuto(){
+	parent.cmdFanSpeedAuto(this)
+}
+
+def cmdFanSpeedHigh(){
+	parent.cmdFanSpeedHigh(this)
+}
+
+def cmdFanSpeedMed(){
+	parent.cmdFanSpeedMed(this)
+}
+
+def cmdFanSpeedLow(){
+	parent.cmdFanSpeedLow(this)
+}
+
+def endManualControl(){
+	parent.endManualControl(this)
+}

devicetypes/fuzzysb/tado-heating-thermostat.src/tado-heating-thermostat.groovy

@@ -0,0 +1,270 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Tado Thermostat
+ *
+ * Author: Stuart Buchanan, Based on original work by Ian M with thanks. also source for icons was from @tonesto7's excellent Nest Manager.
+ *
+ *	Updates:
+ *	Date: 2016-11-28  v1.9 Moved all data collection functions into Tado (Connect) SmartApp, huge changes to device handler, existing devices and handler will need to be uninstalled before installing this version
+ *	Date: 2016-07-13  v1.8 Quick dirty workaround to control zones with a single account.
+ *  Date: 2016-04-25 	v1.7 Finally found time to update this with the lessons learnt from the Tado Cooling Device Type. will bring better support for RM and Thermostat Director
+ *  Date: 2016-04-08 	v1.6 added statusCommand calls to refresh more frequently, also improved compatibility with Rule Machine and Thermostat Mode Director in addition also added default heating temperature where you can set the default temperature for the mode commands.
+ *  Date: 2016-04-05 	v1.5 added improved icons and also a manual Mode End function to fall back to Tado Control.
+ 				Also added preference for how long manual mode runs for either ends at Tado Mode Change (TADO_MODE) or User Control (MANUAL),
+                please ensure the default method is Set in the device properties
+ *  Date: 2016-04-05 	v1.4 rewrite of complete functions to support Tado API v2
+ *  Date: 2016-01-20  v1.3 Updated hvacStatus to include include the correct HomeId for Humidity Value
+ *  Date: 2016-01-15  v1.2 Refactored API request code and added querying/display of humidity
+ *	Date: 2015-12-23	v1.1 Added functionality to change thermostat settings
+ *	Date: 2015-12-04	v1.0 Initial release
+ */
+
+preferences {
+	input("username", "text", title: "Username", description: "Your Tado username")
+	input("password", "password", title: "Password", description: "Your Tado password")
+	input("tadoZoneId", "number", title: "Enter Tado Zone ID?", required: true)
+  input("manualmode", "enum", title: "Default Manual Overide Method", options: ["TADO_MODE","MANUAL"], required: false, defaultValue:"TADO_MODE")
+	input("defHeatingTemp", "number", title: "Default Heating Temperature?", required: false, defaultValue: 21)
+}
+
+metadata {
+	definition (name: "Tado Heating Thermostat", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Actuator"
+    capability "Temperature Measurement"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+		capability "Polling"
+		capability "Refresh"
+		attribute "tadoMode", "string"
+		command "temperatureUp"
+    command "temperatureDown"
+    command "heatingSetpointUp"
+    command "heatingSetpointDown"
+		command "on"
+    command "endManualControl"
+		command "emergencyHeat"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+
+		// reply messages
+	}
+
+tiles(scale: 2){
+      	multiAttributeTile(name: "thermostat", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key:"PRIMARY_CONTROL", canChangeIcon: true, canChangeBackground: true){
+            	attributeState "default", label:'${currentValue}°', backgroundColor:"#fab907", icon:"st.Home.home1"
+            }
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+    			attributeState("VALUE_UP", action: "temperatureUp")
+    			attributeState("VALUE_DOWN", action: "temperatureDown")
+  			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+    			attributeState("default", label:'${currentValue}%', unit:"%")
+  			}
+            tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+    			attributeState("idle", backgroundColor:"#666666")
+    			attributeState("heating", backgroundColor:"#ff471a")
+                attributeState("emergency heat", backgroundColor:"#ff471a")
+  			}
+            tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+    			attributeState("off", label:'${name}')
+    			attributeState("heat", label:'${name}')
+  			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+    			attributeState("default", label:'${currentValue}', unit:"dF")
+  			}
+		}
+
+        valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 1, decoration: "flat") {
+			state "default", label: 'Set Point\r\n\${currentValue}°'
+		}
+
+        standardTile("tadoMode", "device.tadoMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state("SLEEP", label:'${name}', backgroundColor:"#0164a8", icon:"st.Bedroom.bedroom2")
+            state("HOME", label:'${name}', backgroundColor:"#fab907", icon:"st.Home.home2")
+            state("AWAY", label:'${name}', backgroundColor:"#62aa12", icon:"st.Outdoor.outdoor18")
+            state("OFF", label:'', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/hvac_off.png", defaultState: true)
+            state("MANUAL", label:'${name}', backgroundColor:"#804000", icon:"st.Weather.weather1")
+		}
+
+		standardTile("thermostatMode", "device.thermostatMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+        	state("heat", label:'HEAT', backgroundColor:"#ea2a2a", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/heat_mode_icon.png")
+            state("off", label:'', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/hvac_off.png", defaultState: true)
+		}
+
+        standardTile("refresh", "device.switch", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("Off", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.off", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/hvac_off.png"
+		}
+		standardTile("emergencyHeat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.emergencyHeat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/emergencyHeat.png"
+		}
+		valueTile("outsidetemperature", "device.outsidetemperature", width: 2, height: 1, decoration: "flat") {
+			state "outsidetemperature", label: 'Outside Temp\r\n${currentValue}°'
+		}
+		standardTile("heat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.heat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/hvac_heat.png"
+		}
+		standardTile("heatingSetpointUp", "device.heatingSetpoint", width: 1, height: 1, canChangeIcon: false, decoration: "flat") {
+            state "heatingSetpointUp", label:'', action:"heatingSetpointUp", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/heat_arrow_up.png"
+        }
+        standardTile("heatingSetpointDown", "device.heatingSetpoint", width: 1, height: 1, canChangeIcon: false, decoration: "flat") {
+            state "heatingSetpointDown", label:'', action:"heatingSetpointDown", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/heat_arrow_down.png"
+        }
+		standardTile("endManualControl", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+            state("default", label:'', action:"endManualControl", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Heating.src/Images/endManual.png")
+		}
+		main "thermostat"
+		details (["thermostat","thermostatMode","outsidetemperature","heatingSetpoint","refresh","heatingSetpointUp","heatingSetpointDown","tadoMode","emergencyHeat","heat","Off","endManualControl"])
+	}
+}
+
+
+def getWeather(){
+	parent.weatherStatusCommand(this)
+}
+
+def setCapabilitySupportsHeat(value){
+  state.supportsHeat = value
+  log.debug("state.supportsHeat = ${state.supportsHeat}")
+}
+
+def getCapabilitySupportsHeat() {
+  def map = null
+  map = [name: "capabilitySupportsHeat", value: state.supportsHeat]
+  return map
+}
+
+def updated(){
+	refresh()
+}
+
+def installed(){
+	refresh()
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	refresh()
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+    parent.statusCommand(this)
+    getWeather()
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	parent.autoCommand(this)
+  parent.statusCommand(this)
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	parent.onCommand(this)
+  parent.statusCommand(this)
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	parent.offCommand(this)
+  parent.statusCommand(this)
+}
+
+def setHeatingSetpoint(targetTemperature) {
+	log.debug "Executing 'setHeatingSetpoint'"
+  log.debug "Target Temperature ${targetTemperature}"
+  parent.setHeatingTempCommand(this,targetTemperature)
+	parent.statusCommand(this)
+}
+
+def setThermostatMode(requiredMode){
+	switch (requiredMode) {
+    	case "heat":
+        	heat()
+        break
+        case "auto":
+        	auto()
+        break
+		case "off":
+        	off()
+        break
+		case "emergency heat":
+        	emergencyHeat()
+        break
+     }
+}
+
+def temperatureUp(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointUp()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def temperatureDown(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointDown()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def heatingSetpointUp(){
+	log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+    if ((device.currentValue("thermostatSetpoint").toInteger() - 1 ) < state.MinHeatTemp){
+    	log.debug("cannot decrease heat setpoint, its already at the minimum level of " + state.MinHeatTemp)
+    } else {
+		int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() + 1
+		log.debug "Setting heatingSetpoint up to: ${newSetpoint}"
+		setHeatingSetpoint(newSetpoint)
+    }
+}
+
+def heatingSetpointDown(){
+	log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+  if ((device.currentValue("thermostatSetpoint").toInteger() + 1 ) > state.MaxHeatTemp){
+    log.debug("cannot increase heat setpoint, its already at the maximum level of " + state.MaxHeatTemp)
+    } else {
+      int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() - 1
+      log.debug "Setting heatingSetpoint down to: ${newSetpoint}"
+      setHeatingSetpoint(newSetpoint)
+    }
+}
+
+
+// Commands to device
+def heat(){
+	parent.heatCommand(this)
+	parent.statusCommand(this)
+}
+
+def emergencyHeat(){
+  parent.emergencyHeat(this)
+}
+
+def endManualControl(){
+	parent.endManualControl(this)
+}

devicetypes/fuzzysb/tado-heating-user-presence.src/tado-heating-user-presence.groovy

@@ -0,0 +1,174 @@
+/**
+ *  Copyright 2015 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Tado Thermostat
+ *
+ *	Author: Stuart Buchanan, Based on original work by Ian M with thanks
+ *	Date: 2015-04-28 v1.3 changed Presence tile as this was reporting a bug
+ *	Date: 2015-04-28 v1.2 updated API call found issue where session was closed and nothing else was returned, now add number generator to input noCache statement in the query
+ *	Date: 2015-04-27 v1.1 updated API call and added refresh function
+ *	Date: 2015-12-04 v1.0 Initial Release
+ */
+ 
+import groovy.json.JsonOutput
+import groovy.json.JsonSlurper
+import java.util.Random  
+
+preferences {
+	input("username", "text", title: "Username", description: "Your Tado username")
+	input("password", "password", title: "Password", description: "Your Tado password")
+	input("tadouser", "text", title: "Tado User", description: "Your Tado User")
+}  
+ 
+metadata {
+	definition (name: "Tado Heating User Presence", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Presence Sensor"
+		capability "Sensor"
+		capability "Polling"
+		capability "Refresh"
+        
+        command "arrived"
+		command "departed"
+              
+	}
+
+	// simulator metadata
+	simulator {
+		status "present": "presence: present"
+		status "not present": "presence: not present"
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ffffff")
+		}
+		standardTile("refresh", "device.refresh", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		main "presence"
+		details (["presence","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+private parseResponse(resp) {
+	def result
+    log.debug("Executing parseResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+    	log.debug("Executing parseResponse.successTrue")
+        def evtJson = new groovy.json.JsonOutput().toJson(resp.data)
+        def json = new JsonSlurper().parseText(evtJson)
+		def appuserarray = new groovy.json.JsonOutput().toJson(json.appUsers)
+        def list = new JsonSlurper().parseText(appuserarray)
+		list.each {
+    		if ((it.nickname).capitalize() == (settings.tadouser).capitalize()) {
+            	log.debug("Found Tado User : " + it.nickname)
+                if (it.geoTrackingEnabled == true) {
+                	log.debug("Users GeoTracking is Enabled")
+                	if (it.geolocationIsStale == false){
+                    	log.debug("Users Current Relative Position is : " + it.relativePosition )
+                		if (it.relativePosition == 0) {
+                  		  	result = arrived()
+                  		}else{
+                  		  	result = departed()
+                 	   }
+                	}else{
+                	log.debug("Geolocation is Stale Skipping")
+                	}
+                }else{
+                	log.debug("Users GeoTracking Not Enabled")
+                }     
+		}  
+        }
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+    return result  
+}
+
+def installed() {
+	log.debug "Executing 'installed'"
+	statusCommand()
+}
+
+def updated() {
+	log.debug "Executing 'updated'"
+	statusCommand()
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	refresh()
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+    statusCommand()   
+}
+
+
+private sendCommand(method, args = []) {
+    def methods = [
+		'status': [
+        			uri: "https://my.tado.com", 
+                    path: "/mobile/1.6/getAppUsersRelativePositions", 
+                    requestContentType: "application/json", 
+                    query: [username:settings.username, password:settings.password, noCache:args[0], webapp:1]
+                    ],
+	]
+
+	def request = methods.getAt(method)
+    
+    log.debug "Http Params ("+request+")"
+    
+    try{
+        log.debug "Executing 'sendCommand'"
+        
+        if (method == "status"){
+            httpGet(request) { resp ->            
+                parseResponse(resp)
+            }
+        }else{
+            httpGet(request)
+        }
+    } catch(Exception e){
+        log.debug("___exception: " + e)
+    }
+}
+
+
+
+// Commands
+def statusCommand(){
+	log.debug "Executing 'sendCommand.statusCommand'"
+    Random rand = new Random()
+    int min = 10000
+    int max = 99999
+    int randomNum = rand.nextInt((max - min) + 1) + min
+	sendCommand("status",[randomNum])
+}
+
+def arrived() {
+	log.trace "Executing 'arrived'"
+    def result = sendEvent(name: "presence", value: "present")
+    return result
+}
+
+
+def departed() {
+	log.trace "Executing 'departed'"
+	def result = sendEvent(name: "presence", value: "not present")
+    return result
+}
+

devicetypes/fuzzysb/tado-hot-water-control.src/tado-hot-water-control.groovy

@@ -0,0 +1,280 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Tado Thermostat
+ *
+ * 	Author: Stuart Buchanan, Based on original work by Ian M with thanks. also source for icons was from @tonesto7's excellent Nest Manager.
+* 	Date: 2016-11-28 v1.6 Moved all data collection functions into Tado (Connect) SmartApp, huge changes to device handler, existing devices and handler will need to be uninstalled before installing this version
+ *	Date: 2016-07-13 v1.5 Quick dirty workaround to control zones with a single account.
+ * 	Date: 2016-04-25 v1.4 Tado Hot water does not actually return the current water temps, it only returns the Current set point temp. to get around this when the power is on for the hot water botht the temp and setpoint will both display the setpoint value, otherwise will display --
+ * 	Date: 2016-04-25 v1.3 Finally found time to update this with the lessons learnt from the Tado Cooling Device Type. will bring better support for RM and Thermostat Director
+ * 	Date: 2016-04-08 v1.2 added setThermostatMode(mode) function to work better with Rule Machine and Thermostat Mode Director
+ *	Date: 2016-04-05 v1.1 change of default Water Heating Temps can now be defined in device preferences (default Value is 90C).
+ *	Date: 2016-04-05 v1.0 Initial release
+ */
+
+preferences {
+	input("username", "text", title: "Username", description: "Your Tado username")
+	input("password", "password", title: "Password", description: "Your Tado password")
+	input("tadoZoneId", "number", title: "Enter Tado Zone ID?", required: true)
+    input("manualmode", "enum", title: "Default Manual Overide Method", options: ["TADO_MODE","MANUAL"], required: false, defaultValue:"TADO_MODE")
+	input("defWaterTemp", "number", title: "Default Water Heating Temperature", required: false, defaultValue: 90)
+}
+
+metadata {
+	definition (name: "Tado Hot Water Control", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Actuator"
+    capability "Temperature Measurement"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat"
+		capability "Polling"
+		capability "Refresh"
+    attribute "tadoMode", "string"
+		command "temperatureUp"
+    command "temperatureDown"
+    command "heatingSetpointUp"
+    command "heatingSetpointDown"
+		command "on"
+    command "endManualControl"
+		command "emergencyHeat"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+
+		// reply messages
+	}
+
+tiles(scale: 2){
+      	multiAttributeTile(name: "thermostat", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key:"PRIMARY_CONTROL", canChangeIcon: true, canChangeBackground: true){
+            	attributeState "default", label:'${currentValue}°', backgroundColor:"#fab907", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/tap_icon.png"
+            }
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+    			attributeState("VALUE_UP", action: "temperatureUp")
+    			attributeState("VALUE_DOWN", action: "temperatureDown")
+  			}
+            tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+    			attributeState("idle", backgroundColor:"#666666")
+    			attributeState("heating", backgroundColor:"#ff471a")
+                attributeState("emergency heat", backgroundColor:"#ff471a")
+  			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+    			attributeState("off", label:'${name}')
+    			attributeState("heat", label:'${name}')
+  			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+    			attributeState("default", label:'${currentValue}', unit:"dF")
+  			}
+		}
+
+        valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 1, decoration: "flat") {
+			state "default", label: 'Set Point\r\n\${currentValue}°'
+		}
+
+        standardTile("tadoMode", "device.tadoMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state("SLEEP", label:'${name}', backgroundColor:"#0164a8", icon:"st.Bedroom.bedroom2")
+            state("HOME", label:'${name}', backgroundColor:"#fab907", icon:"st.Home.home2")
+            state("AWAY", label:'${name}', backgroundColor:"#62aa12", icon:"st.Outdoor.outdoor18")
+            state("OFF", label:'', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/hvac_off.png", defaultState: true)
+            state("MANUAL", label:'${name}', backgroundColor:"#804000", icon:"st.Weather.weather1")
+		}
+
+		standardTile("thermostatMode", "device.thermostatMode", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+        	state("heat", label:'HEAT', backgroundColor:"#ea2a2a", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/heat_mode_icon.png")
+            state("off", label:'', backgroundColor:"#ffffff", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/hvac_off.png", defaultState: true)
+		}
+
+        standardTile("refresh", "device.switch", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("Off", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.off", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/hvac_off.png"
+		}
+		standardTile("emergencyHeat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.emergencyHeat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/emergencyHeat.png"
+		}
+		valueTile("outsidetemperature", "device.outsidetemperature", width: 2, height: 1, decoration: "flat") {
+			state "outsidetemperature", label: 'Outside Temp\r\n${currentValue}°'
+		}
+		standardTile("heat", "device.thermostat", width: 2, height: 1, decoration: "flat") {
+			state "default", label:"", action:"thermostat.heat", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/hvac_heat.png"
+		}
+		standardTile("heatingSetpointUp", "device.heatingSetpoint", width: 1, height: 1, canChangeIcon: false, decoration: "flat") {
+            state "heatingSetpointUp", label:'', action:"heatingSetpointUp", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/heat_arrow_up.png"
+        }
+        standardTile("heatingSetpointDown", "device.heatingSetpoint", width: 1, height: 1, canChangeIcon: false, decoration: "flat") {
+            state "heatingSetpointDown", label:'', action:"heatingSetpointDown", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/heat_arrow_down.png"
+        }
+		standardTile("endManualControl", "device.thermostat", width: 2, height: 1, canChangeIcon: false, canChangeBackground: true, decoration: "flat") {
+            state("default", label:'', action:"endManualControl", icon:"https://raw.githubusercontent.com/fuzzysb/SmartThings/master/DeviceTypes/fuzzysb/tado.Hot.Water.src/Images/endManual.png")
+		}
+		main "thermostat"
+		details (["thermostat","thermostatMode","outsidetemperature","heatingSetpoint","refresh","heatingSetpointUp","heatingSetpointDown","tadoMode","emergencyHeat","heat","Off","endManualControl"])
+	}
+}
+
+def getWeather(){
+	parent.weatherStatusCommand(this)
+}
+
+def setCapabilitySupportsWater(value){
+  state.supportsWater = value
+  log.debug("state.supportsWater = ${state.supportsWater}")
+}
+
+def getCapabilitySupportsWater() {
+  def map = null
+  map = [name: "capabilitySupportsWater", value: state.supportsWater]
+  return map
+}
+
+def setCapabilitySupportsWaterTempControl(value){
+  state.supportsWaterTempControl = value
+  log.debug("state.supportsWaterTempControl = ${state.supportsWaterTempControl}")
+}
+
+def getCapabilitySupportsWaterTempControl() {
+  def map = null
+  map = [name: "capabilitySupportsWaterTempControl", value: state.supportsWaterTempControl]
+  return map
+}
+
+def updated(){
+	refresh()
+}
+
+def installed(){
+	refresh()
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	refresh()
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+    parent.statusCommand(this)
+    getWeather()
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	parent.autoCommand(this)
+  parent.statusCommand(this)
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	onCommand()
+    statusCommand()
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	offCommand()
+    statusCommand()
+}
+
+def setHeatingSetpoint(targetTemperature) {
+	log.debug "Executing 'setHeatingSetpoint'"
+    log.debug "Target Temperature ${targetTemperature}"
+    setHeatingTempCommand(targetTemperature)
+	statusCommand()
+}
+
+def temperatureUp(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointUp()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def temperatureDown(){
+	if (device.currentValue("thermostatMode") == "heat") {
+    	heatingSetpointDown()
+    } else {
+    	log.debug ("temperature setpoint not supported in the current thermostat mode")
+    }
+}
+
+def heatingSetpointUp(){
+	log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+	if(state.supportsWaterTempControl == "true"){
+		if ((device.currentValue("thermostatSetpoint").toInteger() - 1 ) < state.MinHeatTemp){
+			log.debug("cannot decrease heat setpoint, its already at the minimum level of " + state.MinHeatTemp)
+		} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() + 1
+			log.debug "Setting heatingSetpoint up to: ${newSetpoint}"
+			setHeatingSetpoint(newSetpoint)
+			statusCommand()
+		}
+	} else {
+		log.debug "Hot Water Temperature Capability Not Supported"
+	}
+}
+
+def heatingSetpointDown(){
+	log.debug "Current SetPoint Is " + (device.currentValue("thermostatSetpoint")).toString()
+	if(state.supportsWaterTempControl == "true"){
+		if ((device.currentValue("thermostatSetpoint").toInteger() + 1 ) > state.MaxHeatTemp){
+			log.debug("cannot increase heat setpoint, its already at the maximum level of " + state.MaxHeatTemp)
+		} else {
+			int newSetpoint = (device.currentValue("thermostatSetpoint")).toInteger() - 1
+			log.debug "Setting heatingSetpoint down to: ${newSetpoint}"
+			setHeatingSetpoint(newSetpoint)
+			statusCommand()
+		}
+	} else {
+		log.debug "Hot Water Temperature Capability Not Supported"
+	}
+}
+
+// Commands to device
+
+
+def setThermostatMode(requiredMode){
+	switch (requiredMode) {
+    	case "heat":
+        	heat()
+        break
+        case "auto":
+        	auto()
+        break
+		case "off":
+        	off()
+        break
+		case "emergency heat":
+        	emergencyHeat()
+        break
+     }
+}
+
+def heat(){
+  parent.heatCommand(this)
+  parent.statusCommand(this)
+}
+
+def emergencyHeat(){
+  parent.emergencyHeat(this)
+}
+
+def endManualControl(){
+	parent.endManualControl(this)
+}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -15,6 +15,7 @@ metadata {
 	definition (name: "Aeon Key Fob", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
@@ -118,3 +119,16 @@ def configure() {
 	log.debug("Sending configuration: $cmd")
 	return cmd
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -15,6 +15,7 @@ metadata {
 	definition (name: "Aeon Minimote", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 
@@ -107,3 +108,16 @@ def configure() {
 	log.debug("Sending configuration: $cmds")
 	return cmds
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Polling"
+        capability "Health Check"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,7 +236,33 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    onAction("refresh")
+    // Notify health check about this device with timeout interval 12 minutes
+    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+    startPoll()
+}
+
+/**
+ * Called by health check if no events been generated in the last 12 minutes
+ * If device doesn't respond it will be marked offline (not available)
+ */
+def ping() {
+    TRACE("ping")
+    boseSendGetNowPlaying()
+}
+
+/**
+ * Schedule a 2 minute poll of the device to refresh the
+ * tiles so the user gets the correct information.
+ */
+def startPoll() {
+    TRACE("startPoll")
+    unschedule()
+    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
+    def sec = Math.round(Math.floor(Math.random() * 60))
+    //def cron = "$sec 0/5 * * * ?" // every 5 min
+    def cron = "$sec 0/2 * * * ?" // every 2 min
+    log.debug "schedule('$cron', boseSendGetNowPlaying)"
+    schedule(cron, boseSendGetNowPlaying)
 }
 
 /**
@@ -316,14 +342,6 @@ def onAction(String user, data=null) {
     return actions
 }
 
-/**
- * Called every so often (every 5 minutes actually) to refresh the
- * tiles so the user gets the correct information.
- */
-def poll() {
-    return boseRefreshNowPlaying()
-}
-
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -837,6 +855,10 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
+def boseSendGetNowPlaying() {
+    sendHubCommand(boseGET("/now_playing"))
+}
+
 /**
  * Requests the list of presets
  *
@@ -1014,4 +1036,8 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
+}
+
+def TRACE(text) {
+    log.trace "${text}"
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -1,156 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	CentraLite Dimmer
- *
- *	Author: SmartThings
- *	Date: 2013-12-04
- */
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-metadata {
-	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Sensor"
-
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
-			}
-		}
-		
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		
-		main "switch"
-		details(["switch","refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "Parse description $description"
-	def name = null
-	def value = null
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-	} else if (description?.startsWith("read attr -")) {
-		def descMap = parseDescriptionAsMap(description)
-		log.debug "Read attr: $description"
-		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
-			name = "switch"
-			value = descMap.value.endsWith("01") ? "on" : "off"
-		} else {
-			def reportValue = description.split(",").find {it.split(":")[0].trim() == "value"}?.split(":")[1].trim()
-			name = "power"
-			// assume 16 bit signed for encoding and power divisor is 10
-			value = Integer.parseInt(reportValue, 16) / 10
-		}
-	} else if (description?.startsWith("on/off:")) {
-		log.debug "Switch command"
-		name = "switch"
-		value = description?.endsWith(" 1") ? "on" : "off"
-	}
-
-	def result = createEvent(name: name, value: value)
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-}
-
-// Commands to device
-def on() {
-	[
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
-}
-
-def off() {
-	[
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
-}
-
-def setLevel(value) {
-	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	def cmd = "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 2000}"
-	log.debug cmd
-	cmd
-}
-
-def meter() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
-}
-
-def refresh() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
-}
-
-def configure() {
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}"
-	]
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -16,7 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Button"
-        capability "Actuator"
+		capability "Actuator"
 
 		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
 	}
@@ -74,20 +74,20 @@ def off() {
 }
 
 def levelup() {
-	def curlevel = device.currentValue('level') as Integer 
+	def curlevel = device.currentValue('level') as Integer
 	if (curlevel <= 90)
-    	setLevel(curlevel + 10);     
+    	setLevel(curlevel + 10);
 }
 
 def leveldown() {
-	def curlevel = device.currentValue('level') as Integer 
+	def curlevel = device.currentValue('level') as Integer
 	if (curlevel >= 10)
-    	setLevel(curlevel - 10)    
+    	setLevel(curlevel - 10)
 }
 
 def setLevel(value) {
 	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value) 
+	sendEvent(name: "level", value: value)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
@@ -106,11 +106,11 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	if (cmd.upDown == true) {
 		Integer buttonid = 2
         leveldown()
-		checkbuttonEvent(buttonid)		
+		checkbuttonEvent(buttonid)
     } else if (cmd.upDown == false) {
 		Integer buttonid = 3
         levelup()
-		checkbuttonEvent(buttonid)       
+		checkbuttonEvent(buttonid)
 	}
 }
 
@@ -140,12 +140,12 @@ def buttonEvent(button) {
     def result = []
 	if (button == 1) {
     	def mystate = device.currentValue('switch');
-        if (mystate == "on") 
+        if (mystate == "on")
             off()
         else
-            on()   
+            on()
     }
-    updateState("currentButton", "$button")   
+    updateState("currentButton", "$button")
         // update the device state, recording the button press
         result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
     result
@@ -182,3 +182,16 @@ def updateState(String name, String value) {
 	state[name] = value
 	device.updateDataValue(name, value)
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 3)
+}

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,6 +1,6 @@
 # Connected Cree LED Bulb
 
-
+Cloud Execution
 
 Works with: 
 
@@ -23,8 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
-Check-in interval = 12 mins
+Connected Cree LED Bulb with cloud polling it every __5min__
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -105,7 +105,7 @@ def healthPoll() {
 def configure() {
     unschedule()
     runEvery5Minutes("healthPoll")
-    // Device-Watch allows 2 check-in misses from device
+    // Device-Watch allows 2 check-in misses from device + ping
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -0,0 +1,47 @@
+# Z-wave Dimmer Switch
+
+Local Execution on V2 Hubs
+
+Works with:
+
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
+* **Actuator** - represents that a Device has commands
+* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Check-in interval = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
@@ -82,6 +83,8 @@ metadata {
 }
 
 def updated(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -215,6 +218,13 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []
@@ -226,17 +236,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -23,6 +23,7 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -38,6 +39,7 @@ metadata {
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
 		attribute "deviceTemperatureUnit", "string"
+		attribute "deviceAlive", "enum", ["true", "false"]
 	}
 
 	tiles {
@@ -120,6 +122,21 @@ metadata {
 
 }
 
+void installed() {
+    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
+    // Using 12 minutes because in testing, device health team found that there could be "jitter"
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
+}
+
+// Device Watch will ping the device to proactively determine if the device has gone offline
+// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
+def ping() {
+    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
+    if (isAlive) {
+        refresh()
+    }
+}
+
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -148,14 +165,12 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -166,7 +181,11 @@ def generateEvent(Map results) {
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-			}  else {
+			} else if (name == "deviceAlive") {
+				isChange = isStateChange(device, name, value.toString())
+				event['isStateChange'] = isChange
+				event['displayed'] = false
+			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
@@ -253,7 +272,6 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -283,7 +301,6 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
-
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -354,7 +371,6 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -520,63 +536,56 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
-
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
-
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C")
-	{
-		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = roundC(minHeatingSetpoint)
-		minCoolingSetpoint = roundC(minCoolingSetpoint)
-		heatingSetpoint = roundC(heatingSetpoint)
-		coolingSetpoint = roundC(coolingSetpoint)
+	if(location.temperatureScale == "C") {
+		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
+		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
+		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
+		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
+	} else {
+		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
+		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
+		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
+		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
+		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
+		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
 	}
 
+	log.debug "Current Mode = ${mode}"
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-
+	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	if (mode == "heat") {
-
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-
 	}
 	else if (mode == "cool") {
-
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
-
 	} else if (mode == "auto") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
-
 	} else if (mode == "off") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
-
 	} else if (mode == "auxHeatOnly") {
-
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-
 	}
-
 }
 
 void raiseSetpoint() {
@@ -585,21 +594,31 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
+
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
+
+		if (location.temperatureScale == "C") {
+			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
+		} else {
+			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
+		}
+
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
-		} else {
-			targetvalue = 0
-		}
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -622,20 +641,29 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+
+		if (location.temperatureScale == "C") {
+			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
 		} else {
-			targetvalue = 0
+			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
 		}
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -653,7 +681,6 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
-
 	def mode = device.currentValue("thermostatMode")
 
 	if (mode == "off" || mode == "auto") {
@@ -666,6 +693,18 @@ void alterSetpoint(temp) {
 		def targetHeatingSetpoint
 		def targetCoolingSetpoint
 
+		def temperatureScaleHasChanged = false
+
+		if (location.temperatureScale == "C") {
+			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
+		} else {
+			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
+		}
+
 		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
 			if (temp.value > coolingSetpoint){
@@ -707,17 +746,18 @@ void alterSetpoint(temp) {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
 			}
 		}
+
+		if ( temperatureScaleHasChanged )
+			generateSetpointEvent()
 		generateStatusEvent()
 	}
 }
 
 def generateStatusEvent() {
-
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
-
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -727,36 +767,25 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "cool") {
-
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "auto") {
-
 		statusText = "Right Now: Auto"
-
 	} else if (mode == "off") {
-
 		statusText = "Right Now: Off"
-
 	} else if (mode == "auxHeatOnly") {
-
 		statusText = "Emergency Heat"
-
 	} else {
-
 		statusText = "?"
-
 	}
+
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -770,7 +799,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -29,10 +29,10 @@
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Configuration" 
+		capability "Configuration"
 		capability "Color Control"
         capability "Power Meter"
-       
+
         command "getDeviceData"
         command "softwhite"
         command "daylight"
@@ -54,12 +54,12 @@
         command "setAdjustedColor"
         command "setWhiteLevel"
         command "test"
-        
+
         attribute "whiteLevel", "string"
-      
+
 		fingerprint deviceId: "0x1101", inClusters: "0x27,0x72,0x86,0x26,0x60,0x70,0x32,0x31,0x85,0x33"
 	}
-    
+
     simulator {
     	status "on":  "command: 2003, payload: FF"
     	status "off": "command: 2003, payload: 00"
@@ -84,7 +84,7 @@
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
-		}     
+		}
 		controlTile("whiteSliderControl", "device.whiteLevel", "slider", height: 1, width: 3, inactiveLabel: false) {
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
@@ -183,24 +183,24 @@
 		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
 			state "hue", label: 'Hue ${currentValue}   '
 		}
-        
+
         main(["switch"])
-        details(["switch", 
-                 "levelSliderControl", 
-                 "rgbSelector", 
-                 "whiteSliderControl", 
+        details(["switch",
+                 "levelSliderControl",
+                 "rgbSelector",
+                 "whiteSliderControl",
                  /*"softwhite",
                  "daylight",
                  "warmwhite",
-                 "red", 
-                 "green", 
+                 "red",
+                 "green",
                  "blue",
                  "white",
                  "cyan",
                  "magenta",
                  "orange",
                  "purple",
-                 "yellow",                 
+                 "yellow",
                  "fireplace",
                  "storm",
                  "deepfade",
@@ -214,7 +214,7 @@
 
 def setAdjustedColor(value) {
 	log.debug "setAdjustedColor: ${value}"
-    
+
     toggleTiles("off") //turn off the hard color tiles
 
     def level = device.latestValue("level")
@@ -223,19 +223,19 @@ def setAdjustedColor(value) {
     log.debug "level is: ${level}"
     value.level = level
 
-	def c = hexToRgb(value.hex) 
+	def c = hexToRgb(value.hex)
 	value.rh = hex(c.r * (level/100))
 	value.gh = hex(c.g * (level/100))
 	value.bh = hex(c.b * (level/100))
-	
-    setColor(value)  
+
+    setColor(value)
 }
 
 def setColor(value) {
 	log.debug "setColor: ${value}"
     log.debug "hue is: ${value.hue}"
     log.debug "saturation is: ${value.saturation}"
-    
+
     if (value.size() < 8)
     	toggleTiles("off")
 
@@ -246,22 +246,22 @@ def setColor(value) {
         value.gh = hex(rgb.g)
         value.bh = hex(rgb.b)
     }
-    
+
     if ((value.size() == 3) && (value.hue != null) && (value.saturation != null) && (value.level)) { //user passed in a level value too from outside (App)
     	def rgb = hslToRGB(value.hue, value.saturation, 0.5)
         value.hex = rgbToHex(rgb)
         value.rh = hex(rgb.r * value.level/100)
         value.gh = hex(rgb.g * value.level/100)
-        value.bh = hex(rgb.b * value.level/100)       
+        value.bh = hex(rgb.b * value.level/100)
     }
-    
+
     if (( value.size() == 1) && (value.hex)) { //being called from outside of device (App) with only hex
 		def rgbInt = hexToRgb(value.hex)
         value.rh = hex(rgbInt.r)
         value.gh = hex(rgbInt.g)
         value.bh = hex(rgbInt.b)
     }
-    
+
     if (( value.size() == 2) && (value.hex) && (value.level)) { //being called from outside of device (App) with only hex and level
 
         def rgbInt = hexToRgb(value.hex)
@@ -269,7 +269,7 @@ def setColor(value) {
         value.gh = hex(rgbInt.g * value.level/100)
         value.bh = hex(rgbInt.b * value.level/100)
     }
-    
+
     if (( value.size() == 1) && (value.colorName)) { //being called from outside of device (App) with only color name
         def colorData = getColorData(value.colorName)
         value.rh = colorData.rh
@@ -277,7 +277,7 @@ def setColor(value) {
         value.bh = colorData.bh
         value.hex = "#${value.rh}${value.gh}${value.bh}"
     }
-    
+
     if (( value.size() == 2) && (value.colorName) && (value.level)) { //being called from outside of device (App) with only color name and level
 		def colorData = getColorData(value.colorName)
         value.rh = hex(colorData.r * value.level/100)
@@ -285,7 +285,7 @@ def setColor(value) {
         value.bh = hex(colorData.b * value.level/100)
         value.hex = "#${hex(colorData.r)}${hex(colorData.g)}${hex(colorData.b)}"
     }
-    
+
     if (( value.size() == 3) && (value.red != null) && (value.green != null) && (value.blue != null)) { //being called from outside of device (App) with only color values (0-255)
         value.rh = hex(value.red)
         value.gh = hex(value.green)
@@ -299,7 +299,7 @@ def setColor(value) {
         value.bh = hex(value.blue * value.level/100)
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
-    
+
 	sendEvent(name: "hue", value: value.hue, displayed: false)
 	sendEvent(name: "saturation", value: value.saturation, displayed: false)
 	sendEvent(name: "color", value: value.hex, displayed: false)
@@ -309,26 +309,26 @@ def setColor(value) {
 	if (value.switch) {
 		sendEvent(name: "switch", value: value.switch)
 	}
-	   
+
     sendRGB(value.rh, value.gh, value.bh)
 }
 
 def setLevel(level) {
 	log.debug "setLevel($level)"
-    
+
 	if (level == 0) { off() }
 	else if (device.latestValue("switch") == "off") { on() }
-    
+
     def colorHex = device.latestValue("color")
     if (colorHex == null)
 		colorHex = "#FFFFFF"
-        
+
     def c = hexToRgb(colorHex)
-    
+
     def r = hex(c.r * (level/100))
     def g = hex(c.g * (level/100))
     def b = hex(c.b * (level/100))
-    
+
 	sendEvent(name: "level", value: level)
     sendEvent(name: "setLevel", value: level, displayed: false)
 	sendRGB(r, g, b)
@@ -337,14 +337,14 @@ def setLevel(level) {
 
 def setWhiteLevel(value) {
 	log.debug "setWhiteLevel: ${value}"
-    def level = Math.min(value as Integer, 99)    
+    def level = Math.min(value as Integer, 99)
     level = 255 * level/99 as Integer
     def channel = 0
 
 	if (device.latestValue("switch") == "off") { on() }
-    
+
     sendEvent(name: "whiteLevel", value: value)
-    sendWhite(channel, value)       
+    sendWhite(channel, value)
 }
 
 def sendWhite(channel, value) {
@@ -367,20 +367,20 @@ def sendRGBW(redHex, greenHex, blueHex, whiteHex) {
 
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-    
 
-    
+
+
     def cmds = []
-    
+
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId]).format()
-    
-    
+
+
     //cmds << sendEvent(name: "level", value: 50)
     //cmds << on()
     //cmds << doColorButton("Green")
     delayBetween(cmds, 500)
-    
+
 }
 
 def parse(String description) {
@@ -411,11 +411,11 @@ def parse(String description) {
 
 def getDeviceData() {
     def cmd = []
-    
-    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet()) 
+
+    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
     cmd << response(zwave.versionV1.versionGet())
 	cmd << response(zwave.firmwareUpdateMdV1.firmwareMdGet())
-    
+
     delayBetween(cmd, 500)
 }
 
@@ -426,7 +426,7 @@ def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.Manufacturer
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -435,13 +435,13 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) { 
+def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) {
 
 	log.debug "In CapabilityReport"
 }
@@ -546,7 +546,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
      def value = "when off"
      if (cmd.configurationValue[0] == 1) {value = "when on"}
      if (cmd.configurationValue[0] == 2) {value = "never"}
-     [name: "indicatorStatus", value: value, display: false]
+     [name: "indicatorStatus", value: value, displayed: false]
 }
 */
 def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
@@ -557,7 +557,7 @@ def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
 def on() {
 	log.debug "on()"
 	sendEvent(name: "switch", value: "on")
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), 
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(),
     			  zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
@@ -593,7 +593,7 @@ def refresh() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {   
+	if ( params ) {
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -601,9 +601,9 @@ def updateZwaveParam(params) {
 
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-        
+
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1500)        
+        delayBetween(cmds, 1500)
     }
 }
 
@@ -612,22 +612,22 @@ def test() {
     //value = [hue: 0, saturation: 100, level: 5]
     //value = [red: 255, green: 0, blue: 255, level: 60]
 	//setColor(value)
-    
+
     def cmd = []
-    
+
     if ( !state.cnt ) {
     	state.cnt = 6
     } else {
     	state.cnt = state.cnt + 1
     }
-    
+
     if ( state.cnt > 10 )
     	state.cnt = 6
-    
+
     // run programmed light show
 	cmd << zwave.configurationV1.configurationSet(configurationValue: [state.cnt], parameterNumber: 72, size: 1).format()
-    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()  
-    
+    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()
+
     delayBetween(cmd, 500)
 
 }
@@ -638,23 +638,23 @@ def colorNameToRgb(color) {
         [name:"Soft White",	r: 255, g: 241, b: 224	],
         [name:"Daylight", 	r: 255, g: 255, b: 251	],
         [name:"Warm White", r: 255, g: 244, b: 229	],
-        
+
         [name:"Red", 		r: 255, g: 0,	b: 0	],
 		[name:"Green", 		r: 0, 	g: 255,	b: 0	],
         [name:"Blue", 		r: 0, 	g: 0,	b: 255	],
-        
+
 		[name:"Cyan", 		r: 0, 	g: 255,	b: 255	],
-        [name:"Magenta", 	r: 255, g: 0,	b: 33	],       
+        [name:"Magenta", 	r: 255, g: 0,	b: 33	],
         [name:"Orange", 	r: 255, g: 102, b: 0	],
-        
+
         [name:"Purple", 	r: 170, g: 0,	b: 255	],
 		[name:"Yellow", 	r: 255, g: 255, b: 0	],
         [name:"White", 		r: 255, g: 255, b: 255	]
 	]
-    
-    def colorData = [:]    
+
+    def colorData = [:]
     colorData = colors.find { it.name == color }
-    
+
     colorData
 }
 
@@ -670,7 +670,7 @@ def hexToRgb(colorHex) {
 	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
     def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
     def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-    
+
     def colorData = [:]
     colorData = [r: rrInt, g: ggInt, b: bbInt]
     colorData
@@ -681,7 +681,7 @@ def rgbToHex(rgb) {
     def g = hex(rgb.g)
     def b = hex(rgb.b)
     def hexColor = "#${r}${g}${b}"
-    
+
     hexColor
 }
 
@@ -689,11 +689,11 @@ def hslToRGB(float var_h, float var_s, float var_l) {
 	float h = var_h / 100
     float s = var_s / 100
     float l = var_l
-    
+
     def r = 0
     def g = 0
     def b = 0
-    
+
 	if (s == 0) {
     	r = l * 255
         g = l * 255
@@ -705,26 +705,26 @@ def hslToRGB(float var_h, float var_s, float var_l) {
         } else {
         	var_2 = (l + s) - (s * l)
         }
-                
+
         float var_1 = 2 * l - var_2
-        
+
         r = 255 * hueToRgb(var_1, var_2, h + (1 / 3))
         g = 255 * hueToRgb(var_1, var_2, h)
-        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))    
+        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))
     }
-    
+
     def rgb = [:]
     rgb = [r: r, g: g, b: b]
 
-    rgb 
+    rgb
 }
 
 def hueToRgb(v1, v2, vh) {
-	if (vh < 0) { vh += 1 }            
+	if (vh < 0) { vh += 1 }
 	if (vh > 1) { vh -= 1 }
 	if ((6 * vh) < 1) { return (v1 + (v2 - v1) * 6 * vh) }
     if ((2 * vh) < 1) { return (v2) }
-    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }    
+    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }
     return (v1)
 }
 
@@ -735,49 +735,49 @@ def rgbToHSL(rgb) {
     def h = 0
     def s = 0
     def l = 0
-    
+
     def var_min = [r,g,b].min()
     def var_max = [r,g,b].max()
     def del_max = var_max - var_min
-    
+
     l = (var_max + var_min) / 2
-    
+
     if (del_max == 0) {
             h = 0
             s = 0
     } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
+    	if (l < 0.5) { s = del_max / (var_max + var_min) }
         else { s = del_max / (2 - var_max - var_min) }
 
         def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
         def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
         def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
 
-        if (r == var_max) { h = del_b - del_g } 
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
+        if (r == var_max) { h = del_b - del_g }
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b }
         else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-        
+
 		if (h < 0) { h += 1 }
         if (h > 1) { h -= 1 }
 	}
-    def hsl = [:]    
+    def hsl = [:]
     hsl = [h: h * 100, s: s * 100, l: l]
-    
+
     hsl
 }
 
 def getColorData(colorName) {
 	log.debug "getColorData: ${colorName}"
-    
+
     def colorRGB = colorNameToRgb(colorName)
     def colorHex = rgbToHex(colorRGB)
 	def colorHSL = rgbToHSL(colorRGB)
-        
+
     def colorData = [:]
-    colorData = [h: colorHSL.h, 
-    			 s: colorHSL.s, 
-                 l: device.latestValue("level"), 
-                 r: colorRGB.r, 
+    colorData = [h: colorHSL.h,
+    			 s: colorHSL.s,
+                 l: device.latestValue("level"),
+                 r: colorRGB.r,
                  g: colorRGB.g,
                  b: colorRGB.b,
                  rh: hex(colorRGB.r),
@@ -785,8 +785,8 @@ def getColorData(colorName) {
                  bh: hex(colorRGB.b),
                  hex: colorHex,
                  alpha: 1]
-     
-     colorData                 
+
+     colorData
 }
 
 def doColorButton(colorName) {
@@ -798,7 +798,7 @@ def doColorButton(colorName) {
     def maxLevel = hex(99)
 
     toggleTiles(colorName.toLowerCase().replaceAll("\\s",""))
-    
+
     if 		( colorName == "Fire Place" ) 	{ updateZwaveParam([paramNumber:72, value:6,  size:1]) }
 	else if ( colorName == "Storm" ) 		{ updateZwaveParam([paramNumber:72, value:7,  size:1]) }
     else if ( colorName == "Deep Fade" ) 	{ updateZwaveParam([paramNumber:72, value:8,  size:1]) }
@@ -808,8 +808,8 @@ def doColorButton(colorName) {
     else if ( colorName == "Daylight" ) 	{ String.format("33050400${maxLevel}02${maxLevel}03${maxLevel}04${maxLevel}%02X", 100) }
     else {
 		def c = getColorData(colorName)
-		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]  
-    	setColor(newValue)            
+		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]
+    	setColor(newValue)
     	def r = hex(c.r * (level/100))
     	def g = hex(c.g * (level/100))
     	def b = hex(c.b * (level/100))
@@ -823,19 +823,19 @@ def toggleTiles(color) {
 	if ( !state.colorTiles ) {
     	state.colorTiles = ["softwhite","daylight","warmwhite","red","green","blue","cyan","magenta","orange","purple","yellow","white","fireplace","storm","deepfade","litefade","police"]
     }
-    
+
     def cmds = []
-    
+
     state.colorTiles.each({
     	if ( it == color ) {
         	log.debug "Turning ${it} on"
-            cmds << sendEvent(name: it, value: "on${it}", display: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
+            cmds << sendEvent(name: it, value: "on${it}", displayed: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
         } else {
         	//log.debug "Turning ${it} off"
         	cmds << sendEvent(name: it, value: "off${it}", displayed: false)
         }
     })
-    
+
     delayBetween(cmds, 2500)
 }
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -87,7 +87,7 @@ metadata {
 def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
+        if (resultMap.name != "level" || resultMap.value != 0) {  // Ignore level reports of 0 sent when bulb turns off
             sendEvent(resultMap)
         }
     }
@@ -188,12 +188,10 @@ def updated() {
 }
 
 def on() {
-    state.trigger = "on/off"
     zigbee.on()
 }
 
 def off() {
-    state.trigger = "on/off"
     zigbee.off()
 }
 
@@ -206,7 +204,6 @@ def refresh() {
 }
 
 def setLevel(value) {
-    state.trigger = "setLevel"
     def cmd
     def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -1,351 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	    GE/Jasco ZigBee Dimmer
- *
- *	Author: SmartThings
- *	Date: 2015-07-01
- */
-
-metadata {
-	definition (name: "GE ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch"
-		capability "Switch Level"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Actuator"
-		capability "Sensor"
-
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
-			state "power", label:'${currentValue} W'
-		}
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		main "switch"
-		details(["switch", "level", "power","levelSliderControl","refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
-
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
-		}
-		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug parseDescriptionAsMap(description)
-	}
-}
-
-// Commands to device
-def zigbeeCommand(cluster, attribute){
-	["st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"]
-}
-
-def off() {
-	zigbeeCommand("6", "0")
-}
-
-def on() {
-	zigbeeCommand("6", "1")
-}
-
-def setLevel(value) {
-	value = value as Integer
-	if (value == 0) {
-		off()
-	}
-	else {
-		sendEvent(name: "level", value: value)
-		setLevelWithRate(value, "0000") + ["delay 1000"] + on()	//value is between 0 to 100; GE does NOT switch on if OFF
-	}
-}
-
-def refresh() {
-	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
-	]
-
-}
-
-def configure() {
-	onOffConfig() + levelConfig() + powerConfig() + refresh()
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-	byte tmp;
-	tmp = array[1];
-	array[1] = array[0];
-	array[0] = tmp;
-	return array
-}
-
-def parseDescriptionAsMap(description) {
-	if (description?.startsWith("read attr -")) {
-		(description - "read attr - ").split(",").inject([:]) { map, param ->
-			def nameAndValue = param.split(":")
-			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
-		}
-	}
-	else if (description?.startsWith("catchall: ")) {
-		def seg = (description - "catchall: ").split(" ")
-		def zigbeeMap = [:]
-		zigbeeMap += [raw: (description - "catchall: ")]
-		zigbeeMap += [profileId: seg[0]]
-		zigbeeMap += [clusterId: seg[1]]
-		zigbeeMap += [sourceEndpoint: seg[2]]
-		zigbeeMap += [destinationEndpoint: seg[3]]
-		zigbeeMap += [options: seg[4]]
-		zigbeeMap += [messageType: seg[5]]
-		zigbeeMap += [dni: seg[6]]
-		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
-		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
-		zigbeeMap += [manufacturerId: seg[9]]
-		zigbeeMap += [command: seg[10]]
-		zigbeeMap += [direction: seg[11]]
-		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
-			it.join('')
-		} : []]
-
-		zigbeeMap
-	}
-}
-
-def isKnownDescription(description) {
-	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-		def descMap = parseDescriptionAsMap(description)
-		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
-			isDescriptionOnOff(descMap)
-		}
-		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
-			isDescriptionLevel(descMap)
-		}
-		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
-			isDescriptionPower(descMap)
-		}
-		else {
-			return "false"
-		}
-	}
-	else if(description?.startsWith("on/off:")) {
-		def switchValue = description?.endsWith("1") ? "on" : "off"
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionOnOff(descMap) {
-	def switchValue = "undefined"
-	if (descMap.cluster == "0006") {				//cluster info from read attr
-		value = descMap.value
-		if (value == "01"){
-			switchValue = "on"
-		}
-		else if (value == "00"){
-			switchValue = "off"
-		}
-	}
-	else if (descMap.clusterId == "0006") {
-		//cluster info from catch all
-		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
-		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
-		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
-			switchValue = "on"
-		}
-		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
-			switchValue = "off"
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "switch (0006) capability configured successfully"]
-		}
-	}
-
-	if (switchValue != "undefined"){
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-
-}
-
-//@return - false or "success" or level [0-100]
-def isDescriptionLevel(descMap) {
-	def dimmerValue = -1
-	if (descMap.cluster == "0008"){
-		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
-		def value = convertHexToInt(descMap.value)
-		dimmerValue = Math.round(value * 100 / 255)
-		if(dimmerValue==0 && value > 0) {
-			dimmerValue = 1						//handling for non-zero hex value less than 3
-		}
-	}
-	else if(descMap.clusterId == "0008") {
-		if(descMap.command=="0B"){
-			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "level (0008) capability configured successfully"]
-		}
-	}
-
-	if (dimmerValue != -1){
-		return	[type: "level", value : dimmerValue]
-
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionPower(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0702") {
-		if (descMap.attrId == "0400") {
-			powerValue = convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0702") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0702) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-
-def onOffConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 8 0 0x20 1 3600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 05
-def powerConfig() {
-	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-def setLevelWithRate(level, rate) {
-	if(rate == null){
-		rate = "0000"
-	}
-	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	["st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"]
-}
-
-String convertToHexString(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -1,284 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	    GE/Jasco ZigBee Switch
- *
- *	Author: SmartThings
- *	Date: 2015-07-01
- */
-
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "GE ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Actuator"
-		capability "Sensor"
-
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "power", label:'${currentValue} Watts'
-		}
-		main "switch"
-		details(["switch", "power", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
-
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
-		}
-		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug parseDescriptionAsMap(description)
-	}
-}
-
-// Commands to device
-def zigbeeCommand(cluster, attribute){
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
-}
-
-def off() {
-	zigbeeCommand("6", "0")
-}
-
-def on() {
-	zigbeeCommand("6", "1")
-}
-
-def refresh() {
-	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
-	]
-
-}
-
-def configure() {
-	onOffConfig() + powerConfig() + refresh()
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-	byte tmp;
-	tmp = array[1];
-	array[1] = array[0];
-	array[0] = tmp;
-	return array
-}
-
-def parseDescriptionAsMap(description) {
-	if (description?.startsWith("read attr -")) {
-		(description - "read attr - ").split(",").inject([:]) { map, param ->
-			def nameAndValue = param.split(":")
-			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
-		}
-	}
-	else if (description?.startsWith("catchall: ")) {
-		def seg = (description - "catchall: ").split(" ")
-		def zigbeeMap = [:]
-		zigbeeMap += [raw: (description - "catchall: ")]
-		zigbeeMap += [profileId: seg[0]]
-		zigbeeMap += [clusterId: seg[1]]
-		zigbeeMap += [sourceEndpoint: seg[2]]
-		zigbeeMap += [destinationEndpoint: seg[3]]
-		zigbeeMap += [options: seg[4]]
-		zigbeeMap += [messageType: seg[5]]
-		zigbeeMap += [dni: seg[6]]
-		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
-		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
-		zigbeeMap += [manufacturerId: seg[9]]
-		zigbeeMap += [command: seg[10]]
-		zigbeeMap += [direction: seg[11]]
-		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
-			it.join('')
-		} : []]
-
-		zigbeeMap
-	}
-}
-
-def isKnownDescription(description) {
-	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-		def descMap = parseDescriptionAsMap(description)
-		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
-			isDescriptionOnOff(descMap)
-		}
-		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
-			isDescriptionPower(descMap)
-		}
-		else {
-			return "false"
-		}
-	}
-	else if(description?.startsWith("on/off:")) {
-		def switchValue = description?.endsWith("1") ? "on" : "off"
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-def isDescriptionOnOff(descMap) {
-	def switchValue = "undefined"
-	if (descMap.cluster == "0006") {				//cluster info from read attr
-		value = descMap.value
-		if (value == "01"){
-			switchValue = "on"
-		}
-		else if (value == "00"){
-			switchValue = "off"
-		}
-	}
-	else if (descMap.clusterId == "0006") {
-		//cluster info from catch all
-		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
-		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
-		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
-			switchValue = "on"
-		}
-		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
-			switchValue = "off"
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "switch (0006) capability configured successfully"]
-		}
-	}
-
-	if (switchValue != "undefined"){
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return "false"
-	}
-
-}
-
-def isDescriptionPower(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0702") {
-		if (descMap.attrId == "0400") {
-			powerValue = convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0702") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0702) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return "false"
-	}
-}
-
-
-def onOffConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 05
-def powerConfig() {
-	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-	]
-}
-
-String convertToHexString(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -172,6 +172,3 @@ def verifyPercent(percent) {
     }
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -87,6 +87,3 @@ def parse(description) {
 	results
 }
 
-def ping() {
-	log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -188,6 +188,3 @@ def verifyPercent(percent) {
     }
 }
 
-def ping() {
-    log.trace "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -93,6 +93,3 @@ void refresh() {
 	parent.manualRefresh()
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes
@@ -107,6 +107,3 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def ping() {
-    log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,9 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -23,7 +23,6 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -64,12 +63,8 @@ metadata {
 	}
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -141,7 +136,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -193,14 +187,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+ 		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -209,19 +206,20 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
+	sendEvent(name: "model", value: data.product.name)
 
-	return []
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 }
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,9 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -22,13 +22,12 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
 			}
+
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -53,15 +52,10 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
-
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -71,7 +65,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -123,14 +116,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -138,16 +134,17 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	return []
-}
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
+	}
 }
 
 def selector() {

devicetypes/smartthings/momentary-button-tile.src/momentary-button-tile.groovy

@@ -43,8 +43,8 @@ def parse(String description) {
 }
 
 def push() {
-	sendEvent(name: "switch", value: "on", isStateChange: true, display: false)
-	sendEvent(name: "switch", value: "off", isStateChange: true, display: false)
+	sendEvent(name: "switch", value: "on", isStateChange: true, displayed: false)
+	sendEvent(name: "switch", value: "off", isStateChange: true, displayed: false)
 	sendEvent(name: "momentary", value: "pushed", isStateChange: true)
 }
 

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Nyce Door/Window Sensor (Open/Close Sensor)
 
-
+Cloud Execution
 
 Works with:
 
@@ -23,7 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+Nyce Door/Window sensor with reporting interval of 5 min.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+ 
+* __12min__ checkInterval
+
 
 ## Battery Specification
 

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -1,381 +0,0 @@
-/*
-    Osram Lightify Gardenspot Mini RGB
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-
-metadata {
-    definition (name: "OSRAM LIGHTIFY Gardenspot mini RGB", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Color Control"
-
-        attribute "colorName", "string"
-
-        command "setAdjustedColor"
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    // UI tile definitions
-    tiles {
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-            state "color", action:"setAdjustedColor"
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-            state "colorName", label: '${currentValue}'
-        }
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-            state "level", label: 'Level ${currentValue}%'
-        }
-
-        main(["switch"])
-        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "rgbSelector"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    //log.info "description is $description"
-    if (description?.startsWith("catchall:")) {
-        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-            def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            if(!(description?.startsWith("catchall: 0104 0300"))){
-                def result = createEvent(name: "switch", value: "off")
-                log.debug "Parse returned ${result?.descriptionText}"
-                return result
-            }
-        }
-    }
-    else if (description?.startsWith("read attr -")) {
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Hue value returned is $hueValue"
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(descMap.attrId == "0001"){ //Saturation Attribute
-                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Saturation from refresh is $saturationValue"
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else if(descMap.cluster == "0008"){
-            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-            log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
-        }
-    }
-    else {
-        def name = description?.startsWith("on/off: ") ? "switch" : null
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        def result = createEvent(name: name, value: value)
-        log.debug "Parse returned ${result?.descriptionText}"
-        return result
-    }
-
-
-}
-
-def on() {
-    log.debug "on()"
-    sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def zigbeeOff() {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-}
-
-def off() {
-    log.debug "off()"
-    sendEvent(name: "switch", value: "off")
-    zigbeeOff()
-}
-
-def refresh() {
-    [
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1"
-    ]
-
-}
-
-def configure() {
-    state.levelValue = 100
-    log.debug "Configuring Reporting and Bindings."
-    def configCmds = [
-
-            //Switch Reporting
-            "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-
-            //Level Control Reporting
-            "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-    ]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def poll(){
-    log.debug "Poll is calling refresh"
-    refresh()
-}
-
-def zigbeeSetLevel(level) {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-}
-
-def setLevel(value) {
-	state.levelValue = (value==null) ? 100 : value
-    log.trace "setLevel($value)"
-    def cmds = []
-
-    if (value == 0) {
-        sendEvent(name: "switch", value: "off")
-        cmds << zigbeeOff()
-    }
-    else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-    }
-
-    sendEvent(name: "level", value: state.levelValue)
-    def level = hex(state.levelValue * 255 / 100)
-    cmds << zigbeeSetLevel(level)
-
-    //log.debug cmds
-    cmds
-}
-
-//input Hue Integer values; returns color name for saturation 100%
-private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
-        return
-
-    hueValue = Math.round(hueValue / 100 * 360)
-
-    log.debug "hue value is $hueValue"
-
-    def colorName = "Color Mode"
-    if(hueValue>=0 && hueValue <= 4){
-        colorName = "Red"
-    }
-    else if (hueValue>=5 && hueValue <=21 ){
-        colorName = "Brick Red"
-    }
-    else if (hueValue>=22 && hueValue <=30 ){
-        colorName = "Safety Orange"
-    }
-    else if (hueValue>=31 && hueValue <=40 ){
-        colorName = "Dark Orange"
-    }
-    else if (hueValue>=41 && hueValue <=49 ){
-        colorName = "Amber"
-    }
-    else if (hueValue>=50 && hueValue <=56 ){
-        colorName = "Gold"
-    }
-    else if (hueValue>=57 && hueValue <=65 ){
-        colorName = "Yellow"
-    }
-    else if (hueValue>=66 && hueValue <=83 ){
-        colorName = "Electric Lime"
-    }
-    else if (hueValue>=84 && hueValue <=93 ){
-        colorName = "Lawn Green"
-    }
-    else if (hueValue>=94 && hueValue <=112 ){
-        colorName = "Bright Green"
-    }
-    else if (hueValue>=113 && hueValue <=135 ){
-        colorName = "Lime"
-    }
-    else if (hueValue>=136 && hueValue <=166 ){
-        colorName = "Spring Green"
-    }
-    else if (hueValue>=167 && hueValue <=171 ){
-        colorName = "Turquoise"
-    }
-    else if (hueValue>=172 && hueValue <=187 ){
-        colorName = "Aqua"
-    }
-    else if (hueValue>=188 && hueValue <=203 ){
-        colorName = "Sky Blue"
-    }
-    else if (hueValue>=204 && hueValue <=217 ){
-        colorName = "Dodger Blue"
-    }
-    else if (hueValue>=218 && hueValue <=223 ){
-        colorName = "Navy Blue"
-    }
-    else if (hueValue>=224 && hueValue <=251 ){
-        colorName = "Blue"
-    }
-    else if (hueValue>=252 && hueValue <=256 ){
-        colorName = "Han Purple"
-    }
-    else if (hueValue>=257 && hueValue <=274 ){
-        colorName = "Electric Indigo"
-    }
-    else if (hueValue>=275 && hueValue <=289 ){
-        colorName = "Electric Purple"
-    }
-    else if (hueValue>=290 && hueValue <=300 ){
-        colorName = "Orchid Purple"
-    }
-    else if (hueValue>=301 && hueValue <=315 ){
-        colorName = "Magenta"
-    }
-    else if (hueValue>=316 && hueValue <=326 ){
-        colorName = "Hot Pink"
-    }
-    else if (hueValue>=327 && hueValue <=335 ){
-        colorName = "Deep Pink"
-    }
-    else if (hueValue>=336 && hueValue <=339 ){
-        colorName = "Raspberry"
-    }
-    else if (hueValue>=340 && hueValue <=352 ){
-        colorName = "Crimson"
-    }
-    else if (hueValue>=353 && hueValue <=360 ){
-        colorName = "Red"
-    }
-
-    colorName
-}
-
-private getEndpointId() {
-    new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}
-
-private evenHex(value){
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() % 2 != 0) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}
-
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    def max = 0xfe
-
-    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
-
-    def colorName = getColorName(value.hue)
-    sendEvent(name: "colorName", value: colorName)
-
-    log.debug "color name is : $colorName"
-    sendEvent(name: "hue", value: value.hue, displayed:false)
-    sendEvent(name: "saturation", value: value.saturation, displayed:false)
-    def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
-    def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
-
-    def cmd = []
-    if (value.switch != "off" && device.latestValue("switch") == "off") {
-        cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-        cmd << "delay 150"
-    }
-
-    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
-    cmd << "delay 150"
-    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
-    
-    if (value.level) {
-        state.levelValue = value.level
-        sendEvent(name: "level", value: value.level)
-        def level = hex(value.level * 255 / 100)
-        cmd << zigbeeSetLevel(level)
-    }
-    
-    if (value.switch == "off") {
-        cmd << "delay 150"
-        cmd << off()
-    }
-
-    cmd
-}

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,459 +0,0 @@
-/*
-    Osram Flex RGBW Light Strip
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
-metadata {
-	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-		capability "Switch Level"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-		capability "Color Control"
-
-        attribute "colorName", "string"
-
-        command "setAdjustedColor"
-
-
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
-        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
-
-    }
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
-			state "colorTemperature", action:"color temperature.setColorTemperature"
-		}
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
-			state "colorTemperature", label: '${currentValue} K'
-		}
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-			state "colorName", label: '${currentValue}'
-		}
-
-        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setAdjustedColor"
-		}
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-
-
-		main(["switch"])
-		details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp", "rgbSelector"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	//log.info "description is $description"
-	if (description?.startsWith("catchall:")) {
-		if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            if(!(description?.startsWith("catchall: 0104 0300"))){
-                def result = createEvent(name: "switch", value: "off")
-                log.debug "Parse returned ${result?.descriptionText}"
-                return result
-            }
-        }
-
-	}
-    else if (description?.startsWith("read attr -")) {	//for values returned after hitting refresh
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            if(descMap.attrId == "0007"){
-                log.debug "in read attr"
-                log.debug descMap.value
-                def tempInMired = convertHexToInt(descMap.value)
-                def tempInKelvin = Math.round(1000000/tempInMired)
-                log.trace "temp in kelvin: $tempInKelvin"
-                sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
-            }
-            else if(descMap.attrId == "0008"){  //Color mode attribute
-                if(descMap.value == "00"){
-                    state.colorType = "rgb"
-                }else if(descMap.value == "02"){
-                    state.colorType = "white"
-                }
-            }
-            else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Hue value returned is $hueValue"
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(descMap.attrId == "0001"){ //Saturation Attribute
-                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
-                log.debug "Saturation from refresh is $saturationValue"
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else if(descMap.cluster == "0008"){
-        	def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-        	log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
-        }
-    }
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-        log.debug "description is $description"
-		return result
-	}
-
-
-}
-
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def zigbeeOff() {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-}
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	zigbeeOff()
-}
-
-def refresh() {
-    [
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7", "delay 500",
-        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 8"
-    ]
-
-}
-
-def configure() {
-    state.levelValue = 100
-    state.colorType = "white"
-	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def setColorTemperature(value) {
-    state?.colorType = "white"
-	if(value<101){
-    	value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
-    }
-
-    def tempInMired = Math.round(1000000/value)
-    def finalHex = swapEndianHex(hex(tempInMired, 4))
-    def genericName = getGenericName(value)
-    log.debug "generic name is : $genericName"
-
-    def cmds = []
-    sendEvent(name: "colorTemperature", value: value, displayed:false)
-    sendEvent(name: "colorName", value: genericName)
-
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
-
-    cmds
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def poll(){
-	log.debug "Poll is calling refresh"
-	refresh()
-}
-
-def zigbeeSetLevel(level) {
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-}
-
-def setLevel(value) {
-	state.levelValue = (value==null) ? 100 : value
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << zigbeeOff()
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: state.levelValue)
-	def level = hex(state.levelValue * 255 / 100)
-	cmds << zigbeeSetLevel(level)
-
-	//log.debug cmds
-	cmds
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-private getGenericName(value){
-    def genericName = "White"
-    if(state?.colorType == "rgb"){
-        genericName = "Color Mode"
-    }
-	else{
-        if(value < 3300){
-            genericName = "Soft White"
-        } else if(value < 4150){
-            genericName = "Moonlight"
-        } else if(value < 5000){
-            genericName = "Cool White"
-        } else if(value <= 6500){
-            genericName = "Daylight"
-        }
-    }
-
-    genericName
-}
-
-//input Hue Integer values; returns color name for saturation 100%
-private getColorName(hueValue){
-    if(hueValue>100 || hueValue<0)
-        return
-
-    hueValue = Math.round(hueValue / 100 * 360)
-
-    log.debug "hue value is $hueValue"
-
-    def colorName = "Color Mode"
-    if(hueValue>=0 && hueValue <= 4){
-        colorName = "Red"
-    }
-    else if (hueValue>=5 && hueValue <=21 ){
-        colorName = "Brick Red"
-    }
-    else if (hueValue>=22 && hueValue <=30 ){
-        colorName = "Safety Orange"
-    }
-    else if (hueValue>=31 && hueValue <=40 ){
-        colorName = "Dark Orange"
-    }
-    else if (hueValue>=41 && hueValue <=49 ){
-        colorName = "Amber"
-    }
-    else if (hueValue>=50 && hueValue <=56 ){
-        colorName = "Gold"
-    }
-    else if (hueValue>=57 && hueValue <=65 ){
-        colorName = "Yellow"
-    }
-    else if (hueValue>=66 && hueValue <=83 ){
-        colorName = "Electric Lime"
-    }
-    else if (hueValue>=84 && hueValue <=93 ){
-        colorName = "Lawn Green"
-    }
-    else if (hueValue>=94 && hueValue <=112 ){
-        colorName = "Bright Green"
-    }
-    else if (hueValue>=113 && hueValue <=135 ){
-        colorName = "Lime"
-    }
-    else if (hueValue>=136 && hueValue <=166 ){
-        colorName = "Spring Green"
-    }
-    else if (hueValue>=167 && hueValue <=171 ){
-        colorName = "Turquoise"
-    }
-    else if (hueValue>=172 && hueValue <=187 ){
-        colorName = "Aqua"
-    }
-    else if (hueValue>=188 && hueValue <=203 ){
-        colorName = "Sky Blue"
-    }
-    else if (hueValue>=204 && hueValue <=217 ){
-        colorName = "Dodger Blue"
-    }
-    else if (hueValue>=218 && hueValue <=223 ){
-        colorName = "Navy Blue"
-    }
-    else if (hueValue>=224 && hueValue <=251 ){
-        colorName = "Blue"
-    }
-    else if (hueValue>=252 && hueValue <=256 ){
-        colorName = "Han Purple"
-    }
-    else if (hueValue>=257 && hueValue <=274 ){
-        colorName = "Electric Indigo"
-    }
-    else if (hueValue>=275 && hueValue <=289 ){
-        colorName = "Electric Purple"
-    }
-    else if (hueValue>=290 && hueValue <=300 ){
-        colorName = "Orchid Purple"
-    }
-    else if (hueValue>=301 && hueValue <=315 ){
-        colorName = "Magenta"
-    }
-    else if (hueValue>=316 && hueValue <=326 ){
-        colorName = "Hot Pink"
-    }
-    else if (hueValue>=327 && hueValue <=335 ){
-        colorName = "Deep Pink"
-    }
-    else if (hueValue>=336 && hueValue <=339 ){
-        colorName = "Raspberry"
-    }
-    else if (hueValue>=340 && hueValue <=352 ){
-        colorName = "Crimson"
-    }
-    else if (hueValue>=353 && hueValue <=360 ){
-        colorName = "Red"
-    }
-
-    colorName
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private evenHex(value){
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() % 2 != 0) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}
-
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
-}
-
-def setColor(value){
-    state?.colorType = "rgb"
-	log.trace "setColor($value)"
-	def max = 0xfe
-
-    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
-
-    def colorName = getColorName(value.hue)
-    log.debug "color name is : $colorName"
-    sendEvent(name: "colorName", value: colorName)
-    sendEvent(name: "colorTemperature", value: "--", displayed:false)
-
-
-    sendEvent(name: "hue", value: value.hue, displayed:false)
-	sendEvent(name: "saturation", value: value.saturation, displayed:false)
-	def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
-	def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
-
-	def cmd = []
-	if (value.switch != "off" && device.latestValue("switch") == "off") {
-		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-		cmd << "delay 150"
-	}
-
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
-	cmd << "delay 150"
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
-
-    if (value.level) {
-        state.levelValue = value.level
-        sendEvent(name: "level", value: value.level)
-        def level = hex(value.level * 255 / 100)
-        cmd << zigbeeSetLevel(level)
-    }
-
-	if (value.switch == "off") {
-		cmd << "delay 150"
-		cmd << off()
-	}
-
-	cmd
-}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -1,252 +0,0 @@
-/*
-    Osram Tunable White 60 A19 bulb
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
-metadata {
-    definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-
-        attribute "colorName", "string"
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    // UI tile definitions
-    tiles {
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-            state "colorName", label: '${currentValue}'
-        }
-
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-            state "level", label: 'Level ${currentValue}%'
-        }
-
-
-        main(["switch"])
-        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    //log.trace description
-
-    if (description?.startsWith("catchall:")) {
-        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-            def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            def result = createEvent(name: "switch", value: "off")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-
-    }
-    else if (description?.startsWith("read attr -")) {
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            log.debug descMap.value
-            def tempInMired = convertHexToInt(descMap.value)
-            def tempInKelvin = Math.round(1000000/tempInMired)
-            log.trace "temp in kelvin: $tempInKelvin"
-            sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
-        }
-        else if(descMap.cluster == "0008"){
-            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-            log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
-        }
-    }
-    else {
-        def name = description?.startsWith("on/off: ") ? "switch" : null
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        def result = createEvent(name: name, value: value)
-        log.debug "Parse returned ${result?.descriptionText}"
-        return result
-    }
-}
-
-def on() {
-    log.debug "on()"
-    sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def off() {
-    log.debug "off()"
-    sendEvent(name: "switch", value: "off")
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-}
-
-def refresh() {
-    [
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7"
-    ]
-
-}
-
-def configure() {
-    state.levelValue = 100
-    log.debug "Configuring Reporting and Bindings."
-    def configCmds = [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-    ]
-    return onOffConfig() + levelConfig() + configCmds + refresh() // send refresh cmds as part of config
-}
-
-def onOffConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 6 0 0x10 0 300 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-def setColorTemperature(value) {
-    if(value<101){
-        value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
-    }
-
-    def tempInMired = Math.round(1000000/value)
-    def finalHex = swapEndianHex(hex(tempInMired, 4))
-    def genericName = getGenericName(value)
-    log.debug "generic name is : $genericName"
-
-    def cmds = []
-    sendEvent(name: "colorTemperature", value: value, displayed:false)
-    sendEvent(name: "colorName", value: genericName)
-
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
-
-    cmds
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def setLevel(value) {
-    state.levelValue = (value==null) ? 100 : value
-    log.trace "setLevel($value)"
-    def cmds = []
-
-    if (value == 0) {
-        sendEvent(name: "switch", value: "off")
-        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-    }
-    else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-    }
-
-    sendEvent(name: "level", value: state.levelValue)
-    def level = hex(state.levelValue * 254 / 100)
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-    //log.debug cmds
-    cmds
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-private getGenericName(value){
-    def genericName = "White"
-    if(value < 3300){
-        genericName = "Soft White"
-    } else if(value < 4150){
-        genericName = "Moonlight"
-    } else if(value < 5000){
-        genericName = "Cool White"
-    } else if(value <= 6500){
-        genericName = "Daylight"
-    }
-
-    genericName
-}
-
-private getEndpointId() {
-    new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -69,15 +69,17 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
+	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
+	if (finalResult) {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
+			event = null
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
+			event = createEvent(name: "power", value: powerValue)
 
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
@@ -87,13 +89,14 @@ def parse(String description) {
 			*/
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+			event = createEvent(name: finalResult.type, value: finalResult.value)
 		}
 	}
 	else {
 		log.warn "DID NOT PARSE MESSAGE for description : $description"
 		log.debug parseDescriptionAsMap(description)
 	}
+	return event
 }
 
 // Commands to device
@@ -209,13 +212,16 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
+		else {
+			return [:]
+		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -249,7 +255,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 
 }
@@ -276,10 +282,9 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
-
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -301,7 +306,7 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -1,6 +1,6 @@
 # SmartPower Outlet
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartPower outlet with reporting interval of 5 mins
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __21min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -79,6 +79,7 @@ def parse(String description) {
 	log.debug "description is $description"
 
 	def finalResult = zigbee.getKnownDescription(description)
+	def event = [:]
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
 	if (!finalResult && description!="updated")
@@ -88,10 +89,11 @@ def parse(String description) {
 		log.info "final result = $finalResult"
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
+			event = null
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			event = createEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
@@ -100,7 +102,7 @@ def parse(String description) {
 		}
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			event = createEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
@@ -109,10 +111,11 @@ def parse(String description) {
 		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
 			if (cluster.data[0] == 0x00) {
 				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 			}
 			else {
 				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+				event = null
 			}
 		}
 		else {
@@ -120,6 +123,7 @@ def parse(String description) {
 			log.debug "${cluster}"
 		}
 	}
+	return event
 }
 
 def off() {
@@ -141,9 +145,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "parse($description)"
-	def results = null
+	def results = [:]
 
 	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Moisture Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Moisture sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -102,7 +102,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -202,48 +202,37 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
+
 	}
 
 	return result
@@ -304,9 +293,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Motion Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -22,10 +22,12 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Motion sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -106,7 +106,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -220,48 +220,35 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
 	}
 
@@ -319,9 +306,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -1,309 +0,0 @@
-/**
- *  SmartSense Motion/Temp Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-metadata {
-	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Configuration"
-		capability "Battery"
-        capability "Temperature Measurement"
-		capability "Refresh"
-		capability "Sensor"
-
-        command "enrollResponse"
-
-	}
-
-	simulator {
-		status "active": "zone report :: type: 19 value: 0031"
-		status "inactive": "zone report :: type: 19 value: 0030"
-	}
-
-	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-			}
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-			)
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery", "refresh"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
-
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
-}
-
-private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
-
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-
-			case 0x0406:
-            	log.debug 'motion'
-                resultMap.name = 'motion'
-                break
-        }
-    }
-
-    return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-    	resultMap = getMotionResult(value)
-    }
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
-	}
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
-	def linkText = getLinkText(device)
-
-	log.debug rawValue
-
-	def result = [
-		name: 'battery',
-		value: '--'
-	]
-
-	def volts = rawValue / 10
-	def descriptionText
-
-    if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-		}
-		else if (volts > 0){
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
-		}
-	}
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	def linkText = getLinkText(device)
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
-	]
-}
-
-private Map getMotionResult(value) {
-	log.debug 'motion'
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
-	return [
-		name: 'motion',
-		value: value,
-		descriptionText: descriptionText
-	]
-}
-
-def refresh() {
-	log.debug "refresh called"
-	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
-	]
-
-	return refreshCmds + enrollResponse()
-}
-
-def configure() {
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-    return refresh() + configCmds  // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-    ]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -44,7 +44,7 @@ metadata {
 }
 
 def parse(String description) {
-	def results
+	def results = [:]
 	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
@@ -57,21 +57,24 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def value = parseValue(description)
-	def linkText = getLinkText(device)
-	def descriptionText = parseDescriptionText(linkText, value, description)
-	def handlerName = value
-	def isStateChange = isStateChange(device, name, value)
+	def results = [:]
+	if (name != null) {
+		def value = parseValue(description)
+		def linkText = getLinkText(device)
+		def descriptionText = parseDescriptionText(linkText, value, description)
+		def handlerName = value
+		def isStateChange = isStateChange(device, name, value)
 
-	def results = [
-		name: name,
-		value: value,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
+		results = [
+				name           : name,
+				value          : value,
+				linkText       : linkText,
+				descriptionText: descriptionText,
+				handlerName    : handlerName,
+				isStateChange  : isStateChange,
+				displayed      : displayed(description, isStateChange)
+		]
+	}
 	log.debug "Parse returned $results.descriptionText"
 	return results
 }

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Multi Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -26,10 +26,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Multi sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -127,7 +127,7 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -281,47 +281,35 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
+	def result = [:]
 
 	def volts = rawValue / 10
 
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+	if (!(rawValue == 0 || rawValue == 255)) {
+		result.name = 'battery'
+		result.translatable = true
+		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+			volts = rawValue // For the batteryMap to work the key needs to be an int
+			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
+							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
+			def minVolts = 15
+			def maxVolts = 28
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-			}
+			if (volts < minVolts)
+				volts = minVolts
+			else if (volts > maxVolts)
+				volts = maxVolts
+			def pct = batteryMap[volts]
+			result.value = pct
+		} else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 		}
 	}
 
@@ -412,9 +400,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -1,334 +0,0 @@
-/**
- *  SmartSense Open/Closed Accelerometer Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
- metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
- 		capability "Battery"
- 		capability "Configuration"
- 		capability "Contact Sensor"
- 		capability "Acceleration Sensor"
- 		capability "Refresh"
- 		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
-		command "enrollResponse"
- 	}
-
- 	simulator {
-
- 	}
-
- 	preferences {
- 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
- 	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-			}
-		}
-		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
-		}
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main (["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "battery", "refresh"])
-	}
- }
-
- def parse(String description) {
- 	log.debug "description: $description"
-
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
- 	else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
-
- 	log.debug "Parse returned $map"
- 	def result = map ? createEvent(map) : null
-
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
-
- private Map parseCatchAllMessage(String description) {
- 	Map resultMap = [:]
- 	def cluster = zigbee.parse(description)
- 	if (shouldProcessMessage(cluster)) {
- 		switch(cluster.clusterId) {
- 			case 0x0001:
- 			resultMap = getBatteryResult(cluster.data.last())
- 			break
-
- 			case 0xFC02:
- 			break
-
- 			case 0x0402:
- 			log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-            }
-        }
-
-        return resultMap
-    }
-
-    private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-    cluster.command == 0x0B ||
-    cluster.command == 0x07 ||
-    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
-}
-
-private int getHumidity(value) {
-	return Math.round(Double.parseDouble(value))
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0002") {
-		Integer.parseInt(descMap.value,8)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-		} else {
-			return celsiusToFahrenheit(celsius) as Integer
-		}
-	}
-
-	private Map getBatteryResult(rawValue) {
-		log.debug 'Battery'
-		def linkText = getLinkText(device)
-
-		def result = [
-		name: 'battery'
-		]
-
-		def volts = rawValue / 10
-		def descriptionText
-        if (rawValue == 0 || rawValue == 255) {}
-		else if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-		}
-		else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-	        if (roundedPct <= 0)
-		        roundedPct = 1
-			result.value = Math.min(100, roundedPct)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
-		}
-
-		return result
-	}
-
-	private Map getTemperatureResult(value) {
-		log.debug 'TEMP'
-		def linkText = getLinkText(device)
-		if (tempOffset) {
-			def offset = tempOffset as int
-			def v = value as int
-			value = v + offset
-		}
-		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-		return [
-			name: 'temperature',
-			value: value,
-			descriptionText: descriptionText,
-			unit: temperatureScale
-		]
-	}
-
-	private Map getContactResult(value) {
-		log.debug 'Contact Status'
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-		return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText
-		]
-	}
-
-	private getAccelerationResult(numValue) {
-		def name = "acceleration"
-		def value = numValue.endsWith("1") ? "active" : "inactive"
-		//def linkText = getLinkText(device)
-		def descriptionText = "$linkText was $value"
-		def isStateChange = isStateChange(device, name, value)
-		[
-			name: name,
-			value: value,
-			//unit: null,
-			//linkText: linkText,
-			descriptionText: descriptionText,
-			//handlerName: value,
-			isStateChange: isStateChange
-		//	displayed: displayed(description, isStateChange)
-		]
-	}
-
-	def refresh() {
-		log.debug "Refreshing Temperature and Battery "
-		def refreshCmds = [
-
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
-
-		]
-
-		return refreshCmds + enrollResponse()
-	}
-
-def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-	return refresh() + configCmds // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Open/Closed Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -24,10 +24,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Open Closed sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -93,7 +93,7 @@ def parse(String description) {
     }
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : [:]
 
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
@@ -196,25 +196,19 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
 	def volts = rawValue / 10
-	def descriptionText
-    if (rawValue == 0 || rawValue == 255) {}
-    else if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 	    if (roundedPct <= 0)
 		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
 	}
 
 	return result
@@ -266,9 +260,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -1,6 +1,6 @@
 # SmartSense Temp/Humidity Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -24,10 +24,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Temp/Humidity Sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkIntervalr 5 min interval is confirmed
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	return map ? createEvent(map) : null
+	return map ? createEvent(map) : [:]
 }
 
 private Map parseCatchAllMessage(String description) {
@@ -207,25 +207,20 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
 	def volts = rawValue / 10
-	def descriptionText
-    if (rawValue == 0 || rawValue == 255) {}
-    else if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
+		if (roundedPct <= 0)
+			roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
+
 	}
 
 	return result
@@ -264,15 +259,14 @@ def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +  // New firmware
 			zigbee.readAttribute(0x0402, 0x0000) +
 			zigbee.readAttribute(0x0001, 0x0020)
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -15,9 +15,10 @@ metadata {
 	definition (name: "Simulated Minimote", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-        
+
         command "push1"
         command "push2"
         command "push3"
@@ -45,42 +46,42 @@ metadata {
 		}
  		standardTile("push1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 1", backgroundColor: "#ffffff", action: "push1"
-		} 
+		}
  		standardTile("push2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 2", backgroundColor: "#ffffff", action: "push2"
-		} 
+		}
  		standardTile("push3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 3", backgroundColor: "#ffffff", action: "push3"
-		} 
+		}
  		standardTile("push4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 4", backgroundColor: "#ffffff", action: "push4"
-		} 
+		}
  		standardTile("dummy1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}         
+		}
  		standardTile("hold1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 1", backgroundColor: "#ffffff", action: "hold1"
-		}          
+		}
  		standardTile("hold2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 2", backgroundColor: "#ffffff", action: "hold2"
-		}          
+		}
  		standardTile("dummy2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}         
+		}
  		standardTile("hold3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 3", backgroundColor: "#ffffff", action: "hold3"
-		}          
+		}
  		standardTile("hold4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 4", backgroundColor: "#ffffff", action: "hold4"
-		}          
-        
+		}
+
 		main "button"
 		details(["push1","push2","button","push3","push4","dummy1","hold1","hold2","dummy2","hold3","hold4"])
 	}
 }
 
 def parse(String description) {
-	
+
 }
 
 def push1() {
@@ -125,3 +126,15 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Tyco Door Window Sensor
 
-
+Cloud Execution
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-Contact sensor with maxReportTime of 5 mins.
+Tyco Door Window Sensor with reporting interval of 5 mins.
 Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 min
+
+* __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -181,22 +181,17 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [
-    	name: 'battery'
-    ]
+    def result = [:]
 
-	def volts = rawValue / 10
-	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
+	if (!(rawValue == 0 || rawValue == 255)) {
+		def volts = rawValue / 10
 		def minVolts = 2.1
-    	def maxVolts = 3.0
+		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
 	}
 
 	return result

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -19,6 +19,7 @@ metadata {
         capability "Actuator"
         capability "Battery"
         capability "Button"
+        capability "Holdable Button"        
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"

devicetypes/smartthings/zigbee-dimmer-power.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -0,0 +1,41 @@
+# GE Plug-In/In-Wall Smart Dimmer (ZigBee)
+
+Cloud Execution
+
+Works with:
+
+* [GE In-Wall Smart Dimmer (ZigBee)](https://shop.smartthings.com/#!/products/ge-in-wall-smart-dimmer-switch)
+* [GE Plug-In Smart Dimmer (ZigBee)](https://www.smartthings.com/works-with-smartthings/ge/ge-plug-in-smart-dimmer-zigbee)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Power Meter** - ability to check the power meter(energy consumption) of device
+* **Sensor** - represents the device sensor capability
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Zigbee Power Dimmer with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [GE Z-Wave In-Wall Smart Dimmer (GE 45857) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204988564-GE-In-Wall-Smart-Dimmer-45857GE-ZigBee-)
+* [GE Zigbee Plug-in Smart Dimmer (GE 45852) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205239280-GE-Plug-In-Smart-Dimmer-45852GE-ZigBee-)

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -21,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -70,8 +71,20 @@ def parse(String description) {
         }
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00){
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug zigbee.parseDescriptionAsMap(description)
+        }
     }
 }
 
@@ -87,11 +100,22 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
+
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify LED On/Off/Dim
-
+# Zigbee Dimmer
 
+Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+* [WeMo LED Bulb](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
 
 ## Table of contents
 
@@ -23,14 +24,16 @@ Works with:
 
 ## Device Health
 
-A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+ZigBee Dimmer with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
+
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [OSRAM Lightify LED On/Off/Dim Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [WeMo LED Bulb Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,9 +23,11 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
     }
 
     tiles(scale: 2) {
@@ -102,9 +104,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -1,243 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-//@Deprecated - Moved to zll-rgbw-bulb
-
-/* Philips Hue (via Zigbee)
-
-Capabilities:
-  Actuator
-  Color Control
-  Configuration
-  Polling
-  Refresh
-  Sensor
-  Switch
-  Switch Level
-
-Custom Commands:
-  setAdjustedColor
-
-*/
-
-metadata {
-	definition (name: "Zigbee Hue Bulb", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Color Control"
-		capability "Switch"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		command "setAdjustedColor"
-
-		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setAdjustedColor"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "saturation", action:"color control.setSaturation"
-		}
-		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-			state "saturation", label: 'Sat ${currentValue}    '
-		}
-		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "hue", action:"color control.setHue"
-		}
-
-		main(["switch"])
-		details(["switch", "levelSliderControl", "rgbSelector", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	//log.trace description
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		//log.trace msg
-		//log.trace "data: $msg.data"
-	}
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
-
-def on() {
-	// just assume it works for now
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-}
-
-def off() {
-	// just assume it works for now
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-}
-
-def setHue(value) {
-	def max = 0xfe
-	log.trace "setHue($value)"
-	sendEvent(name: "hue", value: value)
-	def scaledValue = Math.round(value * max / 100.0)
-	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledValue)} 00 0000}"
-	//log.info cmd
-	cmd
-}
-
-def setAdjustedColor(value) {
-	log.debug "setAdjustedColor: ${value}"
-	def adjusted = value + [:]
-	adjusted.hue = adjustOutgoingHue(value.hue)
-	adjusted.level = null // needed because color picker always sends 100
-	setColor(adjusted)
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	def max = 0xfe
-
-	sendEvent(name: "hue", value: value.hue)
-	sendEvent(name: "saturation", value: value.saturation)
-	def scaledHueValue = Math.round(value.hue * max / 100.0)
-	def scaledSatValue = Math.round(value.saturation * max / 100.0)
-
-	def cmd = []
-	if (value.switch != "off" && device.latestValue("switch") == "off") {
-		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-		cmd << "delay 150"
-	}
-
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledHueValue)} 00 0000}"
-	cmd << "delay 150"
-	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledSatValue)} 0000}"
-
-	if (value.level != null) {
-		cmd << "delay 150"
-		cmd.addAll(setLevel(value.level))
-	}
-
-	if (value.switch == "off") {
-		cmd << "delay 150"
-		cmd << off()
-	}
-	log.info cmd
-	cmd
-}
-
-def setSaturation(value) {
-	def max = 0xfe
-	log.trace "setSaturation($value)"
-	sendEvent(name: "saturation", value: value)
-	def scaledValue = Math.round(value * max / 100.0)
-	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledValue)} 0000}"
-	//log.info cmd
-	cmd
-}
-
-def refresh() {
-	"st rattr 0x${device.deviceNetworkId} 1 6 0"
-}
-
-def poll(){
-	log.debug "Poll is calling refresh"
-	refresh()
-}
-
-def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-	//log.debug cmds
-	cmds
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,6 +1,6 @@
 # OSRAM LIGHTIFY LED RGBW Bulb
 
-
+Cloud Execution
 
 Works with: 
 
@@ -27,11 +27,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+OSRAM LIGHTIFY LED RGBW Bulb with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
 
+* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
     }
 
     // UI tile definitions
@@ -143,9 +144,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Power Meter"
         capability "Sensor"
         capability "Switch"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
@@ -77,10 +78,28 @@ def on() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    Integer reportIntervalMinutes = 5
+    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0,reportIntervalMinutes * 60) + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    refresh()
+    log.debug "in configure()"
+    return configureHealthCheck()
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    return refresh()
+}
+
+def updated() {
+    log.debug "in updated()"
+    // updated() doesn't have it's return value processed as hub commands, so we have to send them explicitly
+    def cmds = configureHealthCheck()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it)) }
+}
+
+def ping() {
+    return zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify Tunable 60 White
-
+# ZigBee White Color Temperature Bulb
 
+Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+* [OSRAM LIGHTIFY RT5/6 Tunable White](https://www.smartthings.com/works-with-smartthings/light-bulbs/osram-lightify-rt56-tunable-white)
 
 ## Table of contents
 
@@ -24,14 +25,15 @@ Works with:
 
 ## Device Health
 
-A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Zigbee Bulb with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+*__12min__ checkInterval
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM Lightify Tunable 60 White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM LIGHTIFY RT5/6 Tunable White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/214191863-How-to-connect-OSRAM-LIGHTIFY-Bulbs)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -126,9 +127,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -21,6 +24,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -96,7 +100,38 @@ def poll() {
     refresh()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = refresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
+    log.debug "configure()"
+    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -27,6 +27,10 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -22,12 +25,14 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -96,9 +101,41 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
+    log.debug "configure()"
+    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -0,0 +1,43 @@
+# Z-wave Dimmer Switch Generic
+
+Cloud Execution
+
+Works with: 
+
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
+* [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-wave) and Leviton Universal Dimmer (DZMX1-LZ) (Z-Wave) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -15,12 +15,15 @@ metadata {
 	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
+		capability "Health Check"
 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
+		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
+		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
 	}
 
 	simulator {
@@ -68,6 +71,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -185,6 +193,13 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []

devicetypes/smartthings/zwave-relay.src/zwave-relay.groovy

@@ -81,7 +81,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	[name: "indicatorStatus", value: value, displayed: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {

devicetypes/smartthings/zwave-switch-generic.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -0,0 +1,45 @@
+# Z-wave Switch
+
+Cloud Execution
+
+Works with: 
+
+* [Leviton Appliance Module (DZPA1-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-appliance-module)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://www.smartthings.com/works-with-smartthings/outlets/ge-plug-in-outdoor-smart-switch)
+* [Leviton Outlet (DZR15-1LZ)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-outlet)
+* [Leviton Switch (DZS15-1LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-switch)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+Leviton Appliance Module (DZPA1-1LW), GE Plug-In Outdoor Smart Switch (GE 12720), Leviton Outlet (DZR15-1LZ) and Leviton Switch (DZS15-1LZ) (Z-Wave) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+* [Leviton Outlet (DZR15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Switch (DZS15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -14,12 +14,17 @@
 metadata {
 	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
+		capability "Health Check"
  		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
+		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
+		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
+		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 	}
 
 	// simulator metadata
@@ -50,6 +55,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -126,6 +136,13 @@ def poll() {
 	])
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-switch.src/README.md

@@ -0,0 +1,51 @@
+# Z-Wave Switch
+
+Local Execution on V2 Hubs
+
+Works with: 
+
+* [GE Z-Wave Plug-In Smart Switch (12719)](http://products.z-wavealliance.org/products/1193)
+* [GE Z-Wave In-Wall Smart Outlet (12721)](http://products.z-wavealliance.org/products/1195)
+* [GE Z-Wave In-Wall Smart Switch (12722)](http://products.z-wavealliance.org/products/1196)
+* [GE Z-Wave In-Wall Smart Toggle Switch (12727)](http://products.z-wavealliance.org/products/1200)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Switches (Plug-In, In-Wall(Toggle Switch, Switch, Outlet)) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave Dimmer/Switch Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
+* [GE Z-Wave Plug-In Smart Switch (12719) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903070-GE-Plug-In-Smart-Switch-GE-12719-Z-Wave)
+* [GE Z-Wave In-Wall Smart Outlet (12721) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903020-GE-In-Wall-Smart-Outlet-GE-12721-Z-Wave)
+* [GE Z-Wave In-Wall Smart Switch (12722) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200902540-GE-In-Wall-Smart-Switch-GE-12722-Z-Wave)
+* [GE Z-Wave In-Wall Smart Toggle Switch (12727) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/207568933-GE-In-Wall-Smart-Toggle-Switch-GE-12727-Z-Wave)
+
+

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -19,6 +19,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
@@ -64,6 +65,8 @@ metadata {
 }
 
 def updated(){
+		// Device-Watch simply pings if no device events received for 32min(checkInterval)
+		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -111,7 +114,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	[name: "indicatorStatus", value: value, displayed: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
@@ -156,6 +159,13 @@ def poll() {
 	])
 }
 
+/**
+  * PING is used by Device-Watch in attempt to reach the Device
+**/
+def ping() {
+		refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),
@@ -164,17 +174,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,9 +1,10 @@
 /**
  * 	Color Coordinator 
- *  Version 1.0.0 - 7/4/15
+ *  Version 1.1.0 - 11/9/16
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
+ *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -31,27 +32,35 @@ preferences {
 }
 
 def mainPage() {
-	dynamicPage(name: "mainPage", title: "", install: true, uninstall: true) {
-		section("Master Light") {
+	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
+		def masterInList = slaves.id.find{it==master.id}
+        if (masterInList) {
+        	section ("**WARNING**"){
+            	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
+            }
+        }
+        section("Master Light") {
 			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
 		}
     	section([mobileOnly:true], "Options") {
-			label(title: "Assign a name", required: false)
+			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
 			href "pageAbout", title: "About ${textAppName()}", description: "Tap to get application version, license and instructions"
         }
 	}
 }
 
-page(name: "pageAbout", title: "About ${textAppName()}") {
+page(name: "pageAbout", title: "About ${textAppName()}", uninstall: true) {
 	section {
     	paragraph "${textVersion()}\n${textCopyright()}\n\n${textLicense()}\n"
 	}
 	section("Instructions") {
 		paragraph textHelp()
 	}
+    section("Tap button below to remove application"){
+    }
 }
 
 def installed() {   
@@ -72,27 +81,55 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (master.currentValue("switch") == "on"){
-    	slaves?.on()
-    }
-    else {
-		slaves?.off()  
-    }
+	if (!slaves.id.find{it==master.id}){
+        if (master.currentValue("switch") == "on"){
+            if (randomYes) getRandomColorMaster()
+			else slaves?.on()
+        }
+        else {
+            slaves?.off()  
+        }
+	}
 }
 
 def colorHandler(evt) {
-   	def dimLevel = master.currentValue("level")
-    def hueLevel = master.currentValue("hue")
-    def saturationLevel = master.currentValue("saturation")
+   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+		log.debug "Changing Slave units H,S,L"
+    	def dimLevel = master.currentValue("level")
+    	def hueLevel = master.currentValue("hue")
+    	def saturationLevel = master.currentValue("saturation")
+		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+    	slaves?.setColor(newValue)
+    	try {
+    		log.debug "Changing Slave color temp"
+        	def tempLevel = master.currentValue("colorTemperature")
+    		slaves?.setColorTemperature(tempLevel)
+    	}
+   		catch (e){
+    		log.debug "Color temp for master --"
+    	}
+	}
+}
+
+def getRandomColorMaster(){
+    def hueLevel = Math.floor(Math.random() *1000)
+    def saturationLevel = Math.floor(Math.random() * 100)
+    def dimLevel = master.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    slaves?.setColor(newValue)
+    log.debug hueLevel
+    log.debug saturationLevel
+    master.setColor(newValue)
+    slaves?.setColor(newValue)   
 }
 
 def tempHandler(evt){
-    if (evt.value != "--") {
-    	def tempLevel = master.currentValue("colorTemperature")
-    	slaves?.setColorTemperature(tempLevel)
-    }
+    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+        if (evt.value != "--") {
+            log.debug "Changing Slave color temp based on Master change"
+            def tempLevel = master.currentValue("colorTemperature")
+            slaves?.setColorTemperature(tempLevel)
+        }
+	}
 }
 
 //Version/Copyright/Information/Help
@@ -102,11 +139,11 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.0.0 (07/04/2015)"
+    def text = "Version 1.1.0 (11/09/2016)"
 }
 
 private def textCopyright() {
-    def text = "Copyright © 2015 Michael Struck"
+    def text = "Copyright © 2016 Michael Struck"
 }
 
 private def textLicense() {
@@ -128,5 +165,5 @@ private def textHelp() {
 	def text =
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
-        "including on/off conditions, hue, saturation, level and color temperature."
+        "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
 }

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
             }
         }
     }
@@ -196,6 +196,8 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
+            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
+            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -842,6 +842,7 @@ private void storeThermostatData(thermostats) {
             minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
             maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
             autoMode: stat.settings.autoHeatCoolFeatureEnabled,
+            deviceAlive: stat.runtime.connected == true ? "true" : "false",
             auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
             temperature: (stat.runtime.actualTemperature / 10),
             heatingSetpoint: stat.runtime.desiredHeat / 10,

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -8,7 +8,7 @@
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
  *
- *      http://www.apache.org/licenses/LICENSE-2.0
+ *  http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+	singleInstance: true
 )
 
 preferences {
@@ -37,7 +37,10 @@ preferences {
 
 def mainPage() {
 	def bridges = bridgesDiscovered()
-	if (state.username && bridges) {
+
+	if (state.refreshUsernameNeeded) {
+		return bridgeLinking()
+	} else if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
@@ -102,13 +105,22 @@ def bridgeLinking() {
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-    def paragraphText
+	def paragraphText
 	if (selectedHue) {
-		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-    } else {
-    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-    }
+		if (state.refreshUsernameNeeded) {
+			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
+		} else {
+			paragraphText = "Press the button on your Hue Bridge to setup a link. "
+		}
+	} else {
+		paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+	}
 	if (state.username) { //if discovery worked
+		if (state.refreshUsernameNeeded) {
+			state.refreshUsernameNeeded = false
+			// Issue one poll with new username to cancel local polling with old username
+			poll()
+		}
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
@@ -186,7 +198,7 @@ void ssdpSubscribe() {
 
 private sendDeveloperReq() {
 	def token = app.id
-    def host = getBridgeIP()
+	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "POST",
 		path: "/api",
@@ -197,7 +209,7 @@ private sendDeveloperReq() {
 }
 
 private discoverHueBulbs() {
-    def host = getBridgeIP()
+	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/api/${state.username}/lights",
@@ -219,8 +231,8 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 private verifyHueBridges() {
 	def devices = getHueBridges().findAll { it?.value?.verified != true }
 	devices.each {
-        def ip = convertHexToIP(it.value.networkAddress)
-        def port = convertHexToInt(it.value.deviceAddress)
+		def ip = convertHexToIP(it.value.networkAddress)
+		def port = convertHexToInt(it.value.deviceAddress)
 		verifyHueBridge("${it.value.mac}", (ip + ":" + port))
 	}
 }
@@ -249,7 +261,7 @@ Map bulbsDiscovered() {
 		bulbs.each {
 			def value = "${it.name}"
 			def key = app.id +"/"+ it.id
-            logg += "$value - $key, "
+			logg += "$value - $key, "
 			bulbmap["${key}"] = value
 		}
 	}
@@ -276,22 +288,23 @@ def installed() {
 def updated() {
 	log.trace "Updated with settings: ${settings}"
 	unsubscribe()
-    unschedule()
+	unschedule()
 	initialize()
 }
 
 def initialize() {
 	log.debug "Initializing"
-    unsubscribe(bridge)
-    state.inBulbDiscovery = false
-    state.bridgeRefreshCount = 0
-    state.bulbRefreshCount = 0
+	unsubscribe(bridge)
+	state.inBulbDiscovery = false
+	state.bridgeRefreshCount = 0
+	state.bulbRefreshCount = 0
 	state.updating = false
+	setupDeviceWatch()
 	if (selectedHue) {
-   		addBridge()
-        addBulbs()
-        doDeviceSync()
-        runEvery5Minutes("doDeviceSync")
+		addBridge()
+		addBulbs()
+		doDeviceSync()
+		runEvery5Minutes("doDeviceSync")
 	}
 }
 
@@ -309,6 +322,14 @@ def uninstalled(){
 	state.username = null
 }
 
+private setupDeviceWatch() {
+	def hub = location.hubs[0]
+	// Make sure that all child devices are enrolled in device watch
+	getChildDevices().each {
+		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
+	}
+}
+
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -357,7 +378,6 @@ def addBulbs() {
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
 						d.completedSetup = true
-						d.refresh()
 					}
 				} else {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
@@ -387,23 +407,23 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-     		// compatibility with old devices
-            def newbridge = true
-            childDevices.each {
-            	if (it.getDeviceDataByName("mac")) {
-                    def newDNI = "${it.getDeviceDataByName("mac")}"
-                    if (newDNI != it.deviceNetworkId) {
-                    	def oldDNI = it.deviceNetworkId
-                        log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-                        it.setDeviceNetworkId("${newDNI}")
+	 		// compatibility with old devices
+			def newbridge = true
+			childDevices.each {
+				if (it.getDeviceDataByName("mac")) {
+					def newDNI = "${it.getDeviceDataByName("mac")}"
+					if (newDNI != it.deviceNetworkId) {
+						def oldDNI = it.deviceNetworkId
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+						it.setDeviceNetworkId("${newDNI}")
 						if (oldDNI == selectedHue) {
 							app.updateSetting("selectedHue", newDNI)
 						}
-                        newbridge = false
-                    }
-                }
-            }
-        	if (newbridge) {
+						newbridge = false
+					}
+				}
+			}
+			if (newbridge) {
 				// Hue uses last 6 digits of MAC address as ID number, this number is shown on the bottom of the bridge
 				def idNumber = getBridgeIdNumber(selectedHue)
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub, ["label": "Hue Bridge ($idNumber)"])
@@ -414,9 +434,11 @@ def addBridge() {
 					d.completedSetup = true
 					log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
 					def childDevice = getChildDevice(d.deviceNetworkId)
+					childDevice?.sendEvent(name: "status", value: "Online")
+					childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					updateBridgeStatus(childDevice)
-					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
+					childDevice?.sendEvent(name: "idNumber", value: idNumber)
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -568,47 +590,47 @@ void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
 @Deprecated
 def locationHandler(evt) {
 	def description = evt.description
-    log.trace "Location: $description"
+	log.trace "Location: $description"
 
 	def hub = evt?.hubId
  	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
-    	//SSDP DISCOVERY EVENTS
+		//SSDP DISCOVERY EVENTS
 		log.trace "SSDP DISCOVERY EVENTS"
 		def bridges = getHueBridges()
 		log.trace bridges.toString()
 		if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
-        	//bridge does not exist
+			//bridge does not exist
 			log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
 			bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
 		} else {
 			// update the values
-            def ip = convertHexToIP(parsedEvent.networkAddress)
-            def port = convertHexToInt(parsedEvent.deviceAddress)
-            def host = ip + ":" + port
+			def ip = convertHexToIP(parsedEvent.networkAddress)
+			def port = convertHexToInt(parsedEvent.deviceAddress)
+			def host = ip + ":" + port
 			log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
-            def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+			def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
 			def dni = "${parsedEvent.mac}"
-            def d = getChildDevice(dni)
-            def networkAddress = null
-            if (!d) {
-            	childDevices.each {
-                    if (it.getDeviceDataByName("mac")) {
-                        def newDNI = "${it.getDeviceDataByName("mac")}"
+			def d = getChildDevice(dni)
+			def networkAddress = null
+			if (!d) {
+				childDevices.each {
+					if (it.getDeviceDataByName("mac")) {
+						def newDNI = "${it.getDeviceDataByName("mac")}"
 						d = it
-                        if (newDNI != it.deviceNetworkId) {
-                            def oldDNI = it.deviceNetworkId
-                            log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-                            it.setDeviceNetworkId("${newDNI}")
+						if (newDNI != it.deviceNetworkId) {
+							def oldDNI = it.deviceNetworkId
+							log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+							it.setDeviceNetworkId("${newDNI}")
 							if (oldDNI == selectedHue) {
 								app.updateSetting("selectedHue", newDNI)
 							}
-                            doDeviceSync()
-                        }
-                    }
-                }
+							doDeviceSync()
+						}
+					}
+				}
 			} else {
 				updateBridgeStatus(d)
 				if (d.getDeviceDataByName("networkAddress")) {
@@ -616,22 +638,22 @@ def locationHandler(evt) {
 				} else {
 					networkAddress = d.latestState('networkAddress').stringValue
 				}
-                log.trace "Host: $host - $networkAddress"
-                if(host != networkAddress) {
-                    log.debug "Device's port or ip changed for device $d..."
-                    dstate.ip = ip
-                    dstate.port = port
-                    dstate.name = "Philips hue ($ip)"
-                    d.sendEvent(name:"networkAddress", value: host)
-                    d.updateDataValue("networkAddress", host)
-            	}
-            }
+				log.trace "Host: $host - $networkAddress"
+				if(host != networkAddress) {
+					log.debug "Device's port or ip changed for device $d..."
+					dstate.ip = ip
+					dstate.port = port
+					dstate.name = "Philips hue ($ip)"
+					d.sendEvent(name:"networkAddress", value: host)
+					d.updateDataValue("networkAddress", host)
+				}
+			}
 		}
 	} else if (parsedEvent.headers && parsedEvent.body) {
 		log.trace "HUE BRIDGE RESPONSES"
 		def headerString = parsedEvent.headers.toString()
 		if (headerString?.contains("xml")) {
-            log.trace "description.xml response (application/xml)"
+			log.trace "description.xml response (application/xml)"
 			def body = new XmlSlurper().parseText(parsedEvent.body)
 			if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
 				def bridges = getHueBridges()
@@ -643,7 +665,7 @@ def locationHandler(evt) {
 				}
 			}
 		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
-            log.trace "description.xml response (application/json)"
+			log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
@@ -680,7 +702,7 @@ def doDeviceSync(){
 	poll()
 	ssdpSubscribe()
 	discoverBridges()
-    checkBridgeStatus()
+	checkBridgeStatus()
 }
 
 /**
@@ -693,10 +715,14 @@ def doDeviceSync(){
 private void updateBridgeStatus(childDevice) {
 	// Update activity timestamp if child device is a valid bridge
 	def vbridges = getVerifiedHueBridges()
-	def vbridge = vbridges.find {"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()}
+	def vbridge = vbridges.find {
+		"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()
+	}
 	vbridge?.value?.lastActivity = now()
-	if(vbridge) {
+	if (vbridge && childDevice?.device?.currentValue("status") == "Offline") {
+		log.debug "$childDevice is back Online"
 		childDevice?.sendEvent(name: "status", value: "Online")
+		childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 	}
 }
 
@@ -705,29 +731,37 @@ private void updateBridgeStatus(childDevice) {
  * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
-    def bridges = getHueBridges()
-    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 11)
-    bridges.each {
-        def d = getChildDevice(it.value.mac)
-	    if(d) {
-		    // Set id number on bridge if not done
-		    if (it.value.idNumber == null) {
-			    it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
+	def bridges = getHueBridges()
+	// Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
+	def time = now() - (1000 * 60 * 11)
+	bridges.each {
+		def d = getChildDevice(it.value.mac)
+		if (d) {
+			// Set id number on bridge if not done
+			if (it.value.idNumber == null) {
+				it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
-		    }
+			}
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.value.idNumber is Offline"
-				d.sendEvent(name: "status", value: "Offline")
+				if (d.currentStatus == "Online") {
+					log.warn "$d is Offline"
+					d.sendEvent(name: "status", value: "Offline")
+					d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 
-				state.bulbs?.each {
-					it.value.online = false
+					Calendar currentTime = Calendar.getInstance()
+					getChildDevices().each {
+						def id = getId(it)
+						if (state.bulbs[id]?.online == true) {
+							state.bulbs[id]?.online = false
+							state.bulbs[id]?.unreachableSince = currentTime.getTimeInMillis()
+							it.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
+						}
+					}
 				}
-				getChildDevices().each {
-					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
-				}
-			} else {
+			} else if (d.currentStatus == "Offline") {
+				log.debug "$d is back Online"
+				d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
 			}
 		}
@@ -779,24 +813,24 @@ def parse(childDevice, description) {
 	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
-        def bodyString = parsedEvent.body.toString()
+		def bodyString = parsedEvent.body.toString()
 		if (headerString?.contains("json")) {
-        	def body
-        	try {
-            	body = new groovy.json.JsonSlurper().parseText(bodyString)
-            } catch (all) {
-            	log.warn "Parsing Body failed - trying again..."
-                poll()
-            }
-            if (body instanceof java.util.Map) {
-                // get (poll) reponse
-                return handlePoll(body)
+			def body
+			try {
+				body = new groovy.json.JsonSlurper().parseText(bodyString)
+			} catch (all) {
+				log.warn "Parsing Body failed - trying again..."
+				poll()
+			}
+			if (body instanceof java.util.Map) {
+				// get (poll) reponse
+				return handlePoll(body)
 			} else {
 				//put response
 				return handleCommandResponse(body)
-            }
-        }
-   } else {
+			}
+		}
+	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
 	}
@@ -817,19 +851,19 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 		device.sendEvent([name: "colorTemperature", value: temp, descriptionText: "Color temperature has changed"])
 		// Return because color temperature change is not counted as a color change in SmartThings so no hex update necessary
 		return
-                    }
+	}
 
 	if (hue != null) {
 		// 0-65535
 		def value = Math.min(Math.round(hue * 100 / 65535), 65535) as int
 		events["hue"] = [name: "hue", value: value, descriptionText: "Color has changed", displayed: false]
-                }
+	}
 
 	if (sat != null) {
 		// 0-254
 		def value = Math.round(sat * 100 / 254) as int
-        events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
-            }
+		events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
+	}
 
 	// Following is used to decide what to base hex calculations on since it is preferred to return a colorchange in hex
 	if (xy != null && colormode != "hs") {
@@ -915,8 +949,15 @@ private handleCommandResponse(body) {
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
-		} else if (payload.error) {
-			log.warn "Error returned from Hue bridge error = ${body?.error}"
+		} else if (payload?.error) {
+			log.warn "Error returned from Hue bridge, error = ${payload?.error}"
+			// Check for unauthorized user
+			if (payload?.error?.type?.value == 1) {
+				log.error "Hue username is not valid"
+				state.refreshUsernameNeeded = true
+				state.username = null
+			}
+			return []
 		}
 	}
 
@@ -924,12 +965,9 @@ private handleCommandResponse(body) {
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
 		def id = getId(device)
-		// If device is offline, then don't send events which will update device watch
-		if (isOnline(id)) {
-			sendBasicEvents(device, "on", params.on)
-			sendBasicEvents(device, "bri", params.bri)
-			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
-		}
+		sendBasicEvents(device, "on", params.on)
+		sendBasicEvents(device, "bri", params.bri)
+		sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
 	}
 	return []
 }
@@ -962,39 +1000,38 @@ private handlePoll(body) {
 
 	def bulbs = getChildDevices()
 	for (bulb in body) {
-		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
+		def device = bulbs.find { it.deviceNetworkId == "${app.id}/${bulb.key}" }
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				if (state.bulbs[bulb.key]?.online == false) {
+				if (state.bulbs[bulb.key]?.online == false || state.bulbs[bulb.key]?.online == null) {
 					// light just came back online, notify device watch
-					def lastActivity = now()
-					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+					device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					log.debug "$device is Online"
 				}
 				// Mark light as "online"
 				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
-
-				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
-				if (!state.updating) {
-					sendBasicEvents(device, "on", bulb.value?.state?.on)
-					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
-					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
-				}
 			} else {
 				if (state.bulbs[bulb.key]?.unreachableSince == null) {
 					// Store the first time where device was reported as "unreachable"
 					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
-				} else if (state.bulbs[bulb.key]?.online) {
+				}
+				if (state.bulbs[bulb.key]?.online || state.bulbs[bulb.key]?.online == null) {
 					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
-					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis() || state.bulbs[bulb.key]?.online == null) {
 						log.warn "$device went Offline"
 						state.bulbs[bulb.key]?.online = false
-						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+						device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 					}
 				}
 				log.warn "$device may not reachable by Hue bridge"
 			}
+			// If user just executed commands, then do not send events to avoid confusing the turning on/off state
+			if (!state.updating) {
+				sendBasicEvents(device, "on", bulb.value?.state?.on)
+				sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+				sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+			}
 		}
 	}
 	return []
@@ -1013,16 +1050,16 @@ def updateHandler() {
 
 def hubVerification(bodytext) {
 	log.trace "Bridge sent back description.xml for verification"
-    def body = new XmlSlurper().parseText(bodytext)
-    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-        def bridges = getHueBridges()
-        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-        if (bridge) {
-            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-        } else {
-            log.error "/description.xml returned a bridge that didn't exist"
-        }
-    }
+	def body = new XmlSlurper().parseText(bodytext)
+	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+		def bridges = getHueBridges()
+		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (bridge) {
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a bridge that didn't exist"
+		}
+	}
 }
 
 def on(childDevice) {
@@ -1031,7 +1068,7 @@ def on(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
-    return "Bulb is turning On"
+	return "Bulb is turning On"
 }
 
 def off(childDevice) {
@@ -1040,15 +1077,15 @@ def off(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
-    return "Bulb is turning Off"
+	return "Bulb is turning Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 1 - 254
-    def level
+	def level
 	if (percent == 1)
 		level = 1
 	else
@@ -1082,7 +1119,7 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
@@ -1094,7 +1131,7 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
@@ -1103,14 +1140,14 @@ def setColorTemperature(childDevice, huesettings) {
 }
 
 def setColor(childDevice, huesettings) {
-    log.debug "Executing 'setColor($huesettings)'"
+	log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-    updateInProgress()
+	updateInProgress()
 
-    def value = [:]
-    def hue = null
-    def sat = null
-    def xy = null
+	def value = [:]
+	def hue = null
+	def sat = null
+	def xy = null
 
 	// Prefer hue/sat over hex to make sure it works with the majority of the smartapps
 	if (huesettings.hue != null || huesettings.sat != null) {
@@ -1135,48 +1172,32 @@ def setColor(childDevice, huesettings) {
 		// value.xy = calculateXY(hex, model)
 		// Once groups, or scenes are introduced it might be a good idea to use unique models again
 		value.xy = calculateXY(hex)
-    }
+	}
 */
 
-    // Default behavior is to turn light on
-    value.on = true
+	// Default behavior is to turn light on
+	value.on = true
 
-    if (huesettings.level != null) {
-        if (huesettings.level <= 0)
-            value.on = false
-        else if (huesettings.level == 1)
-            value.bri = 1
-        else
+	if (huesettings.level != null) {
+		if (huesettings.level <= 0)
+			value.on = false
+		else if (huesettings.level == 1)
+			value.bri = 1
+		else
 			value.bri = Math.min(Math.round(huesettings.level * 254 / 100), 254)
-    }
-    value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
+	}
+	value.alert = huesettings.alert ? huesettings.alert : "none"
+	value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
-    // Make sure to turn off light if requested
-    if (huesettings.switch == "off")
-        value.on = false
+	// Make sure to turn off light if requested
+	if (huesettings.switch == "off")
+		value.on = false
 
 	createSwitchEvent(childDevice, value.on ? "on" : "off")
-    put("lights/$id/state", value)
+	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
 
-def ping(childDevice) {
-	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
-		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
-			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
-			return "Bridge is Online"
-		} else {
-			return "Bridge is Offline"
-		}
-	} else if (isOnline(getId(childDevice))) {
-		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
-		return "Device is Online"
-	} else {
-		return "Device is Offline"
-	}
-}
-
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
@@ -1227,30 +1248,30 @@ private getBridgeIdNumber(serialNumber) {
 private getBridgeIP() {
 	def host = null
 	if (selectedHue) {
-        def d = getChildDevice(selectedHue)
-    	if (d) {
-        	if (d.getDeviceDataByName("networkAddress"))
-            	host =  d.getDeviceDataByName("networkAddress")
-        else
-        		host = d.latestState('networkAddress').stringValue
-        }
-        if (host == null || host == "") {
-            def serialNumber = selectedHue
-            def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) {
-            	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
-            }
-            if (bridge?.ip && bridge?.port) {
-            	if (bridge?.ip.contains("."))
-            		host = "${bridge?.ip}:${bridge?.port}"
-                else
-                	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
-            } else if (bridge?.networkAddress && bridge?.deviceAddress)
-            	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }
-        log.trace "Bridge: $selectedHue - Host: $host"
-    }
-    return host
+		def d = getChildDevice(selectedHue)
+		if (d) {
+			if (d.getDeviceDataByName("networkAddress"))
+				host =  d.getDeviceDataByName("networkAddress")
+		else
+				host = d.latestState('networkAddress').stringValue
+		}
+		if (host == null || host == "") {
+			def serialNumber = selectedHue
+			def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
+			if (!bridge) {
+				bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
+			}
+			if (bridge?.ip && bridge?.port) {
+				if (bridge?.ip.contains("."))
+					host = "${bridge?.ip}:${bridge?.port}"
+				else
+					host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
+			} else if (bridge?.networkAddress && bridge?.deviceAddress)
+				host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
+		}
+		log.trace "Bridge: $selectedHue - Host: $host"
+	}
+	return host
 }
 
 private Integer convertHexToInt(hex) {
@@ -1290,7 +1311,7 @@ private List getRealHubFirmwareVersions() {
  * @param childDevice device to send event for
  * @param setSwitch The new switch state, "on" or "off"
  * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- *                  that should generate "off" instead of level change
+ *				  that should generate "off" instead of level change
  */
 private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 
@@ -1433,8 +1454,8 @@ private float[] calculateXY(colorStr, model = null) {
 		xy[0] = closestPoint.x;
 		xy[1] = closestPoint.y;
 	}
-	//        xy[0] = PHHueHelper.precision(4, xy[0]);
-	//        xy[1] = PHHueHelper.precision(4, xy[1]);
+	//		xy[0] = PHHueHelper.precision(4, xy[0]);
+	//		xy[1] = PHHueHelper.precision(4, xy[1]);
 
 
 	// TODO needed, assume it just sets number of decimals?
@@ -1452,7 +1473,7 @@ private float[] calculateXY(colorStr, model = null) {
  *
  * @param points the float array contain x and the y value. [x,y]
  * @param model the model of the lamp, example: "LCT001" for hue bulb. Used to calculate the color gamut.
- *          If this value is empty the default gamut values are used.
+ *		If this value is empty the default gamut values are used.
  * @return the color value in hex (#ff03d3). If xy is null OR xy is not an array of size 2, Color. BLACK will be returned
  */
 private String colorFromXY(points, model ) {
@@ -1766,3 +1787,4 @@ def hsvToHex(hue, sat, value = 100){
 
 	return "#$r1$g1$b1"
 }
+

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -242,8 +242,6 @@ def installed() {
 	} else {
 		initialize()
 	}
-	// Check for new devices and remove old ones every 3 hours
-	runEvery3Hours('updateDevices')
 }
 
 // called after settings are changed
@@ -271,9 +269,19 @@ private removeChildDevices(devices) {
 def initialize() {
 	log.debug "initialize"
 	updateDevices()
+	// Check for new devices and remove old ones every 3 hours
+	runEvery5Minutes('updateDevices')
+	setupDeviceWatch()
 }
 
 // Misc
+private setupDeviceWatch() {
+	def hub = location.hubs[0]
+	// Make sure that all child devices are enrolled in device watch
+	getChildDevices().each {
+		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
+	}
+}
 
 Map apiRequestHeaders() {
 	return ["Authorization": "Bearer ${state.lifxAccessToken}",
@@ -373,32 +381,46 @@ def updateDevices() {
 		selectors.add("${device.id}")
 		if (!childDevice) {
 			// log.info("Adding device ${device.id}: ${device.product}")
-			def data = [
-					label: device.label,
-					level: Math.round((device.brightness ?: 1) * 100),
-					switch: device.connected ? device.power : "unreachable",
-					colorTemperature: device.color.kelvin
-			]
 			if (device.product.capabilities.has_color) {
-				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
-				data["hue"] = device.color.hue / 3.6
-				data["saturation"] = device.color.saturation * 100
-				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, ["label": device.label, "completedSetup": true])
 			} else {
-				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, ["label": device.label, "completedSetup": true])
 			}
 		}
+
+		if (device.product.capabilities.has_color) {
+			childDevice.sendEvent(name: "color", value: colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int))
+			childDevice.sendEvent(name: "hue", value: device.color.hue / 3.6)
+			childDevice.sendEvent(name: "saturation", value: device.color.saturation * 100)
+		}
+		childDevice.sendEvent(name: "label", value: device.label)
+		childDevice.sendEvent(name: "level", value: Math.round((device.brightness ?: 1) * 100))
+		childDevice.sendEvent(name: "switch.setLevel", value: Math.round((device.brightness ?: 1) * 100))
+		childDevice.sendEvent(name: "switch", value: device.power)
+		childDevice.sendEvent(name: "colorTemperature", value: device.color.kelvin)
+		childDevice.sendEvent(name: "model", value: device.product.name)
+
+		if (state.devices[device.id] == null) {
+			// State missing, add it and set it to opposite status as current status to provoke event below
+			state.devices[device.id] = [online: !device.connected]
+		}
+
+		if (!state.devices[device.id]?.online && device.connected) {
+			// Device came online after being offline
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+			log.debug "$device is back Online"
+		} else if (state.devices[device.id]?.online && !device.connected) {
+			// Device went offline after being online
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+			log.debug "$device went Offline"
+		}
+		state.devices[device.id] = [online: device.connected]
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
+		state.devices[it.deviceNetworkId] = null
 		deleteChildDevice(it.deviceNetworkId)
 	}
-	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
 }
 
-def refreshDevices() {
-	log.info("Refreshing all devices...")
-	getChildDevices().each { device ->
-		device.refresh()
-	}
-}
+

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -24,6 +24,12 @@
  *  switches             | switch            | on, off                     | on, off
  *  motionSensors        | motion            |                             | active, inactive
  *  contactSensors       | contact           |                             | open, closed
+ *  thermostat           | thermostat        | setHeatingSetpoint,         | temperature, heatingSetpoint
+ *                       |                   | setCoolingSetpoint(number)  | coolingSetpoint, thermostatSetpoint
+ *                       |                   | off, heat, emergencyHeat    | thermostatMode — ["emergency heat", "auto", "cool", "off", "heat"]
+ *                       |                   | cool, setThermostatMode     | thermostatFanMode — ["auto", "on", "circulate"]
+ *                       |                   | fanOn, fanAuto, fanCirculate| thermostatOperatingState — ["cooling", "heating", "pending heat",
+ *                       |                   | setThermostatFanMode, auto  | "fan only", "vent economizer", "pending cool", "idle"]
  *  presenceSensors      | presence          |                             | present, 'not present'
  *  temperatureSensors   | temperature       |                             | <numeric, F or C according to unit>
  *  accelerationSensors  | acceleration      |                             | active, inactive
@@ -58,6 +64,7 @@ preferences(oauthPage: "deviceAuthorization") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 			input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 			input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
+      input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
 			input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
 			input "temperatureSensors", "capability.temperatureMeasurement", title: "Which Temperature Sensors?", multiple: true, required: false
 			input "accelerationSensors", "capability.accelerationSensor", title: "Which Vibration Sensors?", multiple: true, required: false
@@ -509,7 +516,7 @@ def pollResponse(response, data) {
               def hub = getChildDevice("harmony-${it.key}")
               if (hub) {
                   if (it.value.response.data.currentAvActivity == "-1") {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", displayed: false)
                   } else {
                       def currentActivity
                       def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
@@ -517,7 +524,7 @@ def pollResponse(response, data) {
                         currentActivity = activityDTH.device.displayName
                       else
                         currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", displayed: false)
                   }
               }
           } else {
@@ -569,7 +576,7 @@ def getActivityList() {
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
                         }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", displayed: false)
 					          }
                 }
             }
@@ -936,7 +943,7 @@ def deleteHarmony() {
 }
 
 private getAllDevices() {
-	([] + switches + motionSensors + contactSensors + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
+	([] + switches + motionSensors + contactSensors + thermostats + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
 }
 
 private deviceItem(device) {