Merge pull request #865 from SmartThingsCommunity/MSA-1255-1

MSA-1255: Gidjit - Smart Launcher with SmartThings support

.gitignore

@@ -0,0 +1,23 @@
+# Eclipse files
+/.settings
+/.classpath
+/.project
+/eclipse/
+/target-eclipse
+
+# IntelliJ files
+*.iws
+*.iml
+.idea
+/out
+*.ipr
+
+# Gradle files
+.gradletasknamecache
+.gradle/
+
+# Mac OS files
+.DS_Store
+
+# Build files
+/build

build.gradle

@@ -0,0 +1,105 @@
+import java.nio.charset.StandardCharsets
+import java.nio.file.Paths
+import com.smartthings.deployment.slack.FileUpload
+import com.smartthings.deployment.slack.Message
+
+apply plugin: 'groovy'
+apply plugin: 'smartthings-executable-deployment'
+apply plugin: 'smartthings-slack'
+
+buildscript {
+    dependencies {
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
+    }
+    repositories {
+        mavenLocal()
+        jcenter()
+        maven {
+            credentials {
+                username smartThingsArtifactoryUserName
+                password smartThingsArtifactoryPassword
+            }
+            url "http://artifactory.smartthings.com/libs-release-local"
+        }
+    }
+}
+
+repositories {
+    mavenLocal()
+    jcenter()
+}
+
+dependencies {
+}
+
+slackSendMessage {
+    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
+    String token = project.hasProperty('slackToken') ? project.property('slackToken') : null
+    String webhookUrl = project.hasProperty('slackWebhookUrl') ? project.property('slackWebhookUrl') : null
+    String channel = project.hasProperty('slackChannel') ? project.property('slackChannel') : null
+    String drinks = 'https://dl.dropboxusercontent.com/s/m1z5mpd3c83lwev/minion_beer.jpeg?dl=0'
+    String wolverine = 'https://dl.dropboxusercontent.com/s/4lbjqzvm2v033u9/minion_wolverine.jpg?dl=0'
+    String beach = 'https://dl.dropboxusercontent.com/s/rqrfgxk53gfng69/minion_beach.png?dl=0'
+    String iconUrl
+    String color
+    String messageText
+    String username
+    switch (branch) {
+        case 'master':
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
+            break
+        case 'staging':
+            username = 'Dickory'
+            iconUrl = beach
+            color = '#FFDE20'
+            messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
+            break
+        case 'production':
+            username = 'Dock'
+            iconUrl = drinks
+            color = '#FF1D23'
+            messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'
+            break
+        default:
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = "Began deployment of an _SmartThingsPublic[${branch}]_ branch.  Have no idea what's going on."
+    }
+    List<String> archives = []
+    File rootDir = new File("${project.buildDir}/archives")
+    if (rootDir.exists()) {
+        // Create a list of archives which were deployed.
+        java.nio.file.Path rootPath = Paths.get(rootDir.absolutePath)
+        rootDir.eachFileRecurse { File file ->
+            if (file.name.endsWith('.tar.gz')) {
+                java.nio.file.Path archivePath = Paths.get(file.absolutePath)
+                archives.add(rootPath.relativize(archivePath).toString())
+            }
+        }
+    }
+    Date date = new Date()
+    String fileDate = date.format('yyyy-MM-dd_HH-mm-ss', TimeZone.getTimeZone('GMT'))
+
+    // Required Task Arguments.
+    file = new FileUpload(
+        data: archives.join('\n').getBytes(StandardCharsets.UTF_8),
+        filename: "deployment-notes-${fileDate}.txt",
+        title: 'Deployment Notes',
+        channels: channel,
+        token: token,
+        color: color
+    )
+    message = new Message(
+        webhookUrl: webhookUrl,
+        username: username,
+        asUser: true,
+        iconUrl: iconUrl,
+        channel: channel,
+        fallback: 'Deployment Notification',
+        text: messageText
+    )
+}

circle.yml

@@ -0,0 +1,25 @@
+machine:
+  java:
+    version:
+      oraclejdk8
+
+dependencies:
+  override:
+    - echo "Nothing to do."
+
+test:
+  override:
+    - echo "We don't have any tests :-("
+
+deployment:
+  develop:
+    branch: master
+    commands:
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_DEV"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
+
+  stage:
+    branch: staging
+    commands:
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_STAGE"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace

devicetypes/com-obycode/beaconthing.src/beaconthing.groovy

@@ -0,0 +1,107 @@
+/**
+*  BeaconThing
+*
+*  Copyright 2015 obycode
+*
+*  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*  in compliance with the License. You may obtain a copy of the License at:
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*  for the specific language governing permissions and limitations under the License.
+*
+*/
+
+import groovy.json.JsonSlurper
+
+metadata {
+	definition (name: "BeaconThing", namespace: "com.obycode", author: "obycode") {
+		capability "Beacon"
+		capability "Presence Sensor"
+		capability "Sensor"
+
+		attribute "inRange", "json_object"
+		attribute "inRangeFriendly", "string"
+
+		command "setPresence", ["string"]
+		command "arrived", ["string"]
+		command "left", ["string"]
+	}
+
+	simulator {
+		status "present": "presence: 1"
+		status "not present": "presence: 0"
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
+		}
+		valueTile("inRange", "device.inRangeFriendly", inactiveLabel: true, height:1, width:3, decoration: "flat") {
+			state "default", label:'${currentValue}', backgroundColor:"#ffffff"
+		}
+		main "presence"
+		details (["presence","inRange"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "not present")
+	def emptyList = []
+	def json = new groovy.json.JsonBuilder(emptyList)
+	sendEvent(name:"inRange", value:json.toString())
+}
+
+def setPresence(status) {
+	log.debug "Status is $status"
+	sendEvent(name:"presence", value:status)
+}
+
+def arrived(id) {
+	log.debug "$id has arrived"
+	def theList = device.latestValue("inRange")
+	def inRangeList = new JsonSlurper().parseText(theList)
+	if (inRangeList.contains(id)) {
+		return
+	}
+	inRangeList += id
+	def json = new groovy.json.JsonBuilder(inRangeList)
+	log.debug "Now in range: ${json.toString()}"
+	sendEvent(name:"inRange", value:json.toString())
+
+	// Generate human friendly string for tile
+	def friendlyList = "Nearby: " + inRangeList.join(", ")
+	sendEvent(name:"inRangeFriendly", value:friendlyList)
+
+	if (inRangeList.size() == 1) {
+		setPresence("present")
+	}
+}
+
+def left(id) {
+	log.debug "$id has left"
+	def theList = device.latestValue("inRange")
+	def inRangeList = new JsonSlurper().parseText(theList)
+	inRangeList -= id
+	def json = new groovy.json.JsonBuilder(inRangeList)
+	log.debug "Now in range: ${json.toString()}"
+	sendEvent(name:"inRange", value:json.toString())
+
+	// Generate human friendly string for tile
+	def friendlyList = "Nearby: " + inRangeList.join(", ")
+
+	if (inRangeList.empty) {
+		setPresence("not present")
+		friendlyList = "No one is nearby"
+	}
+
+	sendEvent(name:"inRangeFriendly", value:friendlyList)
+}

devicetypes/encored-technologies/enertalk-energy-meter.src/enertalk-energy-meter.groovy

@@ -0,0 +1,104 @@
+/**
+ *  EnerTalk Energy Meter
+ *
+ *  Copyright 2015 hyeon seok yang
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "EnerTalk Energy Meter", namespace: "Encored Technologies", author: "hyeon seok yang") {
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles(scale:2) {
+    	valueTile("view", "device.view", decoration: "flat") {
+       		state "view", label:' ${currentValue} kWh'
+		}
+		valueTile("month", "device.month", width: 6, height : 3, decoration: "flat") {
+       		state "month", label:' ${currentValue}'
+		}
+        valueTile("real", "device.real", width: 2, height : 2, decoration: "flat") {
+       		state "real", label:' ${currentValue}'
+		}
+        valueTile("tier", "device.tier", width: 2, height : 2, decoration: "flat") {
+       		state "tier", label:' ${currentValue}'
+		}
+        valueTile("plan", "device.plan", width: 2, height : 2, decoration: "flat") {
+       		state "plan", label:' ${currentValue}'
+		}
+        
+        htmlTile(name:"deepLink", action:"linkApp", whitelist:["code.jquery.com", 
+    	"ajax.googleapis.com", 
+        "fonts.googleapis.com",
+    	"code.highcharts.com", 
+    	"enertalk-card.encoredtech.com", 
+    	"s3-ap-northeast-1.amazonaws.com",
+        "s3.amazonaws.com", 
+    	"ui-hub.encoredtech.com",
+        "enertalk-auth.encoredtech.com",
+        "api.encoredtech.com",
+        "cdnjs.cloudflare.com",
+        "encoredtech.com",
+        "itunes.apple.com"], width:2, height:2){}
+        
+        main (["view"])
+        details (["month", "real", "tier", "plan", "deepLink"])
+	}
+}
+
+mappings {
+	
+      path("/linkApp") {action: [ GET: "getLinkedApp" ]}
+}
+
+def getLinkedApp() {
+	def lang = clientLocale?.language
+    if ("${lang}" == "ko") {
+    	lang = "<p style=\'margin-left:15vw; color: #aeaeb0;\'>기기 설정</p>"
+    } else {
+    	lang = "<p style=\'margin-left:5vw; color: #aeaeb0;\'>Setup Device</p>"
+    }
+	renderHTML() {
+        head {
+           """
+			<meta name="viewport" content="initial-scale=1, maximum-scale=1, user-scalable=no, width=device-width, height=device-height">
+           	<style>
+            	#레이어_1 { margin-left : 17vw; width : 50vw; height : 50vw;}
+                .st0{fill:#B5B6BB;}
+            </style>
+        """ 
+        }
+        body {
+        """
+            <div id="container">
+            	<a id="st-deep-link" href="#">
+                	<svg version="1.1" id="레이어_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px" viewBox="0 0 40 40" style="enable-background:new 0 0 40 40;" xml:space="preserve"><path class="st0" d="M20,0C9,0,0,9,0,20C0,30.5,8,39,18.2,40l3.8-4.8l-3.9-4.8c-4.9-0.9-8.6-5.2-8.6-10.4c0-5.8,4.7-10.5,10.5-10.5
+					S30.5,14.2,30.5,20c0,5.1-3.7,9.4-8.5,10.3l3.7,4.5L21.8,40C32,39.1,40,30.5,40,20C40,9,31,0,20,0z"/></svg>
+                </a>
+                ${lang} 
+            </div>
+            <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js"></script>
+            <script>
+           		var ua = navigator.userAgent.toLowerCase();
+                var isAndroid = ua.indexOf("android") > -1;
+                if(!isAndroid) { 
+                	\$("#st-deep-link").attr("href", "https://itunes.apple.com/kr/app/enertalk-for-home/id1024660780?mt=8");
+                } else {
+                	\$("#st-deep-link").attr("href", "market://details?id=com.ionicframework.enertalkhome874425");
+                }
+            </script>
+        """
+        }
+	}
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -0,0 +1,272 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+        
+        capability "Temperature Measurement"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86, 0x84", outClusters: ""//actual NIF
+	}
+
+	simulator {
+		
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        main "FGK"
+        details(["FGK","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+        
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -0,0 +1,239 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+        
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGK"
+        details(["FGK","battery"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -0,0 +1,269 @@
+/**
+ *  Fibaro Flood Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Water Sensor"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+	}
+
+	simulator {
+    
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGFS failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+
+	encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -0,0 +1,281 @@
+/**
+ *  Fibaro Motion Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Illuminance Measurement"
+		capability "Motion Sensor"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+	}
+    
+	simulator {
+		
+    }
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
+            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+		}
+        
+        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGMS"
+        details(["FGMS","battery","temperature","illuminance"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"        
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    switch (cmd.sensorType) {
+    	case 1:
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
+            break
+    	case 3:
+        	map.name = "illuminance"
+            map.value = cmd.scaledSensorValue.toInteger().toString()
+            map.unit = "lux"
+            break
+    }
+
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	if (cmd.eventParameter[0] == 3) {
+            		map.name = "tamper"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+            	}
+            	if (cmd.eventParameter[0] == 8) {
+                	map.name = "motion"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: motion has stopped"
+                }
+        		break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+                
+            case 8:
+                map.name = "motion"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: motion detected"
+                break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+    
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -0,0 +1,795 @@
+/**
+ *  CoopBoss H3Vx
+ *	02/29/16	Fixed app crash with Android by changing the syntax of default state in tile definition. 
+ *				Fixed null value errors during join process.  Added 3 new commands to refresh data.
+ *
+ *	01/18/16	Masked invalid temperature reporting when TempProbe1 is below 0C
+ *				Added setBaseCurrentNE, readBaseCurrentNE, commands as well as baseCurrentNE attribute.  
+ *
+ *  Copyright 2016 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *  Icon location = http://scripts.3dgo.net/smartthings/icons/
+ */
+metadata {
+	definition (name: "CoopBoss H3Vx", namespace: "JohnRucker", author: "John.Rucker@Solar-Current.com") {
+        capability "Refresh"
+        capability "Polling"
+        capability "Sensor"
+        capability "Actuator"
+        capability "Configuration"
+		capability "Temperature Measurement"   
+        capability "Door Control"
+  		capability "Switch"
+        
+        command "closeDoor"
+        command "closeDoorHiI"
+        command "openDoor"
+        command "autoCloseOn"
+        command "autoCloseOff"
+        command "autoOpenOn"
+        command "autoOpenOff"
+        command "setCloseLevelTo"
+        command "setOpenLevelTo" 
+        command "setSensitivityLevel"
+        command "Aux1On"
+        command "Aux1Off"        
+        command "Aux2On"
+        command "Aux2Off" 
+        command "updateTemp1"
+        command "updateTemp2"
+        command "updateSun"
+        command "setNewBaseCurrent"
+        command "setNewPhotoCalibration"
+        command "readNewPhotoCalibration"
+        command "readBaseCurrentNE"
+        command "setBaseCurrentNE"
+        command "updateSensitivity"
+        command "updateCloseLightLevel"
+        command "updateOpenLightLevel"
+
+        attribute "doorState","string"
+        attribute "currentLightLevel","number"
+        attribute "closeLightLevel","number"
+        attribute "openLightLevel","number"
+        attribute "autoCloseEnable","string" 
+        attribute "autoOpenEnable","string"
+        attribute "TempProb1","number"
+        attribute "TempProb2","number"   
+        attribute "dayOrNight","string"
+        attribute "doorSensitivity","number"
+        attribute "doorCurrent","number"  
+        attribute "doorVoltage","number"
+        attribute "Aux1","string"
+        attribute "Aux2","string"
+        attribute "coopStatus","string"
+        attribute "baseDoorCurrent","number"
+        attribute "photoCalibration","number"
+        attribute "baseCurrentNE","string"
+        
+    	fingerprint profileId: "0104", inClusters: "0000,0101,0402", manufacturer: "Solar-Current", model: "Coop Boss"
+    
+	}
+
+	// simulator metadata
+	simulator {
+    }
+    
+    
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffsetCoop", "number", title: "Coop Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input "tempOffsetOutside", "number", title: "Outside Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false        
+	}    
+       
+
+	// UI tile definitions
+	tiles(scale: 2){        
+		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{  
+			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
+			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+			} 
+            tileAttribute ("device.coopStatus", key: "SECONDARY_CONTROL") {
+				attributeState "device.coopStatus", label:'${currentValue}'
+			}
+        }
+                     
+		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{
+      		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
+            attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
+            attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
+            attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
+            attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"
+            } 
+            tileAttribute ("device.doorState", key: "SECONDARY_CONTROL") {
+				attributeState "unknown", label: 'Door is in unknown state. Push to open.'
+                attributeState "open", label: 'Coop door is open. Push to close.'
+                attributeState "opening", label: 'Caution, door is opening!'
+                attributeState "closed", label: 'Coop door is closed. Push to open.'
+                attributeState "closing", label: 'Caution, door is closing!'
+                attributeState "jammed", label: 'Door open! Push for high-force close'
+                attributeState "forced close", label: "Door is closed. Push to open."
+                attributeState "fault", label: 'Door fault check electrical connection.'
+                attributeState "Sent", label: 'Command sent to CoopBoss...'
+			}                 
+    	}        
+        
+		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}    
+        
+		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}            
+        
+		valueTile("TempProb1", "device.TempProb1", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Coop\r${currentValue}°', unit:"F", action:"updateTemp1"}         
+        
+		valueTile("TempProb2", "device.TempProb2", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Outside\r${currentValue}°', unit:"F", action:"updateTemp2"}        
+
+		valueTile("currentLevel", "device.currentLightLevel", width: 2, height: 2, decoration: "flat") {
+        state "default", label:'Sun\r${currentValue}', action:"updateSun"}    
+                
+        valueTile("dayOrNight", "device.dayOrNight", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'${currentValue}.'
+        }             
+                
+        controlTile("SetClSlider", "device.closeLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "closeLightLevel", action:"setCloseLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetClValue", "device.closeLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Close\nSunlight\n${currentValue}', action:'updateCloseLightLevel'
+        }        
+        
+        controlTile("SetOpSlider", "device.openLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setOpenLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetOpValue", "device.openLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Open\nSunlight\n${currentValue}', action:'updateOpenLightLevel'
+        } 
+        
+        controlTile("SetSensitivitySlider", "device.doorSensitivity", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setSensitivityLevel", backgroundColor:"#d04e00"
+        }        
+        
+        valueTile("SetSensitivityValue", "device.doorSensitivity", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Door\nSensitivity\n${currentValue}', action:'updateSensitivity'
+        }          
+        
+        standardTile("refresh", "device.refresh", width: 2, height: 2, decoration: "flat", inactiveLabel: false) {
+		state "default", label:'All', action:"refresh.refresh", icon:"st.secondary.refresh-icon"
+		}   
+        
+		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
+		}        
+        
+		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
+		}            
+        
+		main "doorCtrl"
+		details (["dtlsDoorCtrl", "TempProb1", "TempProb2", "currentLevel", "autoClose", "autoOpen", "dayOrNight",
+        "SetClSlider", "SetClValue", "SetOpSlider", "SetOpValue", "SetSensitivitySlider", "SetSensitivityValue",
+        "aux1", "aux2", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events  def parse(String description) {
+def parse(String description) {
+	log.debug "description: $description"
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    log.debug map
+	//return map ? createEvent(map) : null
+    sendEvent(map)
+    callUpdateStatusTxt() 
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]    
+    def cluster = zigbee.parse(description)
+    log.debug cluster
+    if (cluster.clusterId == 0x0402) {
+        switch(cluster.sourceEndpoint) {
+
+            case 0x39:		// Endpoint 0x39 is the temperature of probe 1
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb1"
+            def celsius = Integer.valueOf(temp,16).shortValue()    
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+                celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)		
+                if (tempOffsetOutside) {
+                    def offset = tempOffsetOutside as int
+					resultMap.value = resultMap.value + offset
+                }                      
+            }
+            sendEvent(name: "temperature", value: resultMap.value, displayed: false)		// set the temperatureMeasurment capability to temperature
+            break
+
+            case 0x40:													// Endpoint 0x40 is the temperature of probe 2
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb2"
+            def celsius = Integer.valueOf(temp,16).shortValue() 									
+            //resultMap.descriptionText = "Prob2 celsius value = ${celsius}"
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+            	celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)			
+                if (tempOffsetCoop) {
+                    def offset = tempOffsetCoop as int
+					resultMap.value = resultMap.value + offset
+                }                                                
+            }                           
+            break
+    	}                        
+	}
+    
+    if (cluster.clusterId == 0x0101 && cluster.command == 0x0b) {		// This is a default response to a command sent to cluster 0x0101 door control
+    	//log.debug "Default Response Data = $cluster.data"
+        switch(cluster.data) {
+        
+        case "[10, 0]":		// 0x0a turn auto close on command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "on"        
+        break                 
+        
+        case "[11, 0]":		// 0x0b turn auto close off command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "off"        
+        break            
+        
+        case "[12, 0]":		// 0x0C turn auto open on command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "on"        
+        break    
+        
+        case "[13, 0]":		// 0x0d turn auto open off command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "off"        
+        break               
+        
+        
+        case "[20, 0]":		// 0x14 Aux1 On command verified 
+        log.info "verified Aux1 On"
+    	sendEvent(name: "switch", value: "on", displayed: false)   
+        resultMap.name = "Aux1"
+        resultMap.value = "on"        
+        break
+
+        case "[21, 0]":		// 0x15 Aux1 Off command verified 
+        log.info "verified Aux1 Off"
+    	sendEvent(name: "switch", value: "off", displayed: false)
+        resultMap.name = "Aux1"
+        resultMap.value = "off"
+        break
+        
+        case "[22, 0]":		// 0x16 Aux2 On command verified 
+        log.info "verified Aux2 On"    
+        resultMap.name = "Aux2"
+        resultMap.value = "on"        
+        break
+
+        case "[23, 0]":		// 0x17 Aux2 Off command verified 
+        log.info "verified Aux2 Off"
+        resultMap.name = "Aux2"
+        resultMap.value = "off"        
+        break        
+        
+        }
+    }
+    return resultMap
+}
+
+private Map parseReportAttributeMessage(String description) {
+    Map resultMap = [:]
+    def descMap = parseDescriptionAsMap(description)
+    //log.debug "read attr descMap --> $descMap"
+    if (descMap.cluster == "0101" && descMap.attrId == "0003") {
+        resultMap.name = "doorState"
+        if (descMap.value == "00"){
+            resultMap.value = "unknown"
+            sendEvent(name: "door", value: "unknown", displayed: false)
+        }else if(descMap.value == "01"){
+            resultMap.value = "closed"
+            sendEvent(name: "door", value: "closed", displayed: false)            
+        }else if(descMap.value == "02"){
+            resultMap.value = "open"    
+            sendEvent(name: "door", value: "open", displayed: false)              
+        }else if(descMap.value == "03"){
+            resultMap.value = "jammed"     
+        }else if(descMap.value == "04"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "05"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "06"){
+            resultMap.value = "closing"  
+            sendEvent(name: "door", value: "closing", displayed: false)              
+        }else if(descMap.value == "07"){
+            resultMap.value = "opening"
+            sendEvent(name: "door", value: "opening", displayed: false)                 
+        }else if(descMap.value == "08"){
+            resultMap.value = "fault"            
+        }else {            
+            resultMap.value = "unknown"
+        }   
+        resultMap.descriptionText = "Door State Changed to ${resultMap.value}"
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0400") { 
+        resultMap.name = "currentLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))      
+        resultMap.displayed = false
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0401") { 
+        resultMap.name = "closeLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0402") { 
+        resultMap.name = "openLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0403") { 
+        resultMap.name = "autoCloseEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}       
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0404") { 
+        resultMap.name = "autoOpenEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}  
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0405") { 
+        resultMap.name = "doorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001        
+
+     } else if (descMap.cluster == "0101" && descMap.attrId == "0408") { 
+        resultMap.name = "doorSensitivity"
+        resultMap.value = (100 - Integer.parseInt(descMap.value, 16))
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0409") { 
+        resultMap.name = "baseDoorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001                
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040a") { 
+        resultMap.name = "doorVoltage"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))  
+        resultMap.value = resultMap.value * 0.001
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040b") { 
+        resultMap.name = "Aux1"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+    	sendEvent(name: "switch", value: "on", displayed: false)        
+        }else{
+        resultMap.value = "off"        
+    	sendEvent(name: "switch", value: "off", displayed: false)        
+        }
+     
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040c") { 
+        resultMap.name = "Aux2"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+        }else{
+        resultMap.value = "off"        
+        }   
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040d") { 
+        resultMap.name = "photoCalibration"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040e") { 
+        resultMap.name = "baseCurrentNE"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    }    
+    return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+    //log.info "ParseCustomMessage called with ${description}"
+	Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        resultMap.name = "temperature"
+    	def rawT = (description - "temperature: ").trim()
+        resultMap.descriptionText = "Temperature celsius value = ${rawT}"
+        def rawTint = Float.parseFloat(rawT)
+        if (rawTint > 65){
+        	resultMap.name = null
+            resultMap.value = null
+            resultMap.descriptionText = "Temperature celsius value = ${rawT} is invalid not updating"
+            log.warn "Invalid temperature value detected! rawT = ${rawT}, description = ${description}"
+        }else if (rawT ==  -32768){											// This number is used to indicate an error in the temperature reading
+            resultMap.value = "ERR"
+        }else{
+            resultMap.value = celsiusToFahrenheit(rawT.toFloat()) as Float
+            sendEvent(name: "TempProb1", value: resultMap.value, displayed: false)		// Workaround for lack of access to endpoint information for Temperature report  
+        }        
+	}
+    resultMap.displayed = false
+    log.info "Temperature reported = ${resultMap.value}"
+    return resultMap    
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+// Added for Temeperature parse
+def getFahrenheit(value) {
+	def celsius = Integer.parseInt(value, 16)
+	return celsiusToFahrenheit(celsius) as Integer
+}
+
+// Private methods
+def callUpdateStatusTxt(){	
+	def cTemp = device.currentState("TempProb1")?.value
+    def cLight = 0
+    def testNull = device.currentState("currentLightLevel")?.value
+    if (testNull != null){
+    cLight = device.currentState("currentLightLevel")?.value as int
+    }   
+	updateStatusTxt(cTemp, cLight)
+}
+
+def updateStatusTxt(currentTemp, currentLight){
+	//log.info "called updateStatusTxt with ${currentTemp}, ${currentLight}"
+    def cTmp = currentTemp
+    def cLL = 10
+    def oLL = 10
+    
+    def testNull = device.currentState("closeLightLevel")?.value
+    if (testNull != null){
+    	cLL = device.currentState("closeLightLevel")?.value as int
+	}
+
+    testNull = device.currentState("openLightLevel")?.value
+    if (testNull != null){
+    	oLL = device.currentState("openLightLevel")?.value as int
+    }   
+    
+    def aOpnEn = device.currentState("autoOpenEnable")?.value
+    def aClsEn = device.currentState("autoCloseEnable")?.value
+    
+        if (currentLight < cLL){  
+        	if (aOpnEn == "on"){
+           		sendEvent(name: "dayOrNight", value: "Sun must be > ${oLL} to auto open", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} open at ${oLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Open is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto open off. Coop ${cTmp}°", displayed: false)                
+                }
+        }else { 
+        	if (aClsEn == "on"){        
+            	sendEvent(name: "dayOrNight", value: "Sun must be < ${cLL} to auto close", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} close at ${cLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Close is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto close off. Coop ${cTmp}°", displayed: false)                   
+                }
+        }
+}
+
+// Commands to device
+def on() {
+	log.debug "on calling Aux1On"
+    Aux1On()
+}
+
+def off() {
+	log.debug "off calling Aux1Off"
+    Aux1Off()
+}
+
+def close() {
+	log.debug "close calling closeDoor"
+	closeDoor()
+}
+
+def open() {
+	log.debug "open calling openDoor"
+	openDoor()
+}
+
+def Aux1On(){
+	log.debug "Sending Aux1 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x14 {}"             
+}
+
+def Aux1Off(){     
+	log.debug "Sending Aux1 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x15 {}"             
+}
+
+def Aux2On(){
+	log.debug "Sending Aux2 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x16 {}"             
+}
+
+def Aux2Off(){
+	log.debug "Sending Aux2 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x17 {}"             
+}
+
+def openDoor() {
+	log.debug "Sending Open command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x1 {}"
+}
+
+def closeDoor() {
+	log.debug "Sending Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0 {}"
+}
+
+def closeDoorHiI() {
+	log.debug "Sending High Current Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x4 {}"
+}
+
+def autoOpenOn() {
+	log.debug "Setting Auto Open On"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0C {}"
+}
+
+def autoOpenOff() {
+	log.debug "Setting Auto Open Off"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0D {}"
+}
+
+def autoCloseOn() {
+	log.debug "Setting Auto Close On"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0A {}"
+}
+
+def autoCloseOff() {
+	log.debug "Setting Auto Close Off"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0B {}"
+}
+
+def setOpenLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Open Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402"											// Read light value   
+    cmd    
+}
+
+def setCloseLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Close Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401"											// Read light value   
+    cmd 
+    
+}
+
+def setSensitivityLevel(cValue) {
+	def cX = 100 - cValue
+	log.debug "Setting Door sensitivity level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value. 
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408"											// Read attribute 
+    cmd    
+}
+
+def setNewBaseCurrent(cValue) {
+	def cX = cValue as int
+	log.info "Setting new BaseCurrent to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value.
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"											// Read attribute 
+    cmd    
+}
+
+def setNewPhotoCalibration(cValue) {
+	def cX = cValue as int
+	log.info "Setting new Photoresister calibration to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D 0x2B {${Integer.toHexString(cX)}}"		// Write attribute.  0x2B is a 32 bit signed integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readNewPhotoCalibration() {
+	log.info "Requesting current Photoresister calibration "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readBaseCurrentNE() {
+	log.info "Requesting base current never exceed setting "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def setBaseCurrentNE(cValue) {
+	def cX = cValue as int
+	log.info "Setting new base Current Never Exceed to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit unsigned integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def poll(){
+	log.debug "Polling Device"
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read probe 1 Temperature 
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read probe 2 Temperature        
+    
+    cmd
+}
+
+def updateTemp1() {
+	log.debug "Sending attribute read request for Temperature Probe1"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd
+}
+
+def updateTemp2() {
+	log.debug "Sending attribute read request for Temperature Probe2"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2   
+    cmd
+}
+
+
+def updateSun() {
+	log.debug "Sending attribute read request for Sun Light Level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd
+}
+
+def updateSensitivity() {
+	log.debug "Sending attribute read request for door sensitivity"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"	// Read Door sensitivity
+    cmd
+}
+
+def updateCloseLightLevel() {
+	log.debug "Sending attribute read close light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	
+    cmd
+}
+
+def updateOpenLightLevel() {
+	log.debug "Sending attribute read open light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	
+    cmd
+}
+
+def refresh() {
+	log.debug "sending refresh command"   
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	// Read Door Close Light Level
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	// Read Door Open Light Level
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0403"	// Read Auto Door Close Settings 
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0404"	// Read Auto Door Open Settings
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd << "delay 150" 
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"    // Object detection sensitivity 
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2    
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0405"    // Current required to close door      
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040B"    // Aux1 Status      
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040C"    // Aux2 Status      
+    cmd << "delay 150"     
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"		// Read Base current
+
+    cmd
+}
+
+def configure() {
+    log.debug "Binding SEP 0x38 DEP 0x01 Cluster 0x0101 Lock cluster to hub"  
+    log.debug "Binding SEP 0x39 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    log.debug "Binding SEP 0x40 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    
+    def cmd = []
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x38 0x01 0x0101 {${device.zigbeeId}} {}"			// Bind to end point 0x38 and the lock cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x39 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x39 and the temperature cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x40 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x40 and the temperature cluster
+    cmd << "delay 1500"    
+    
+    log.info "Sending ZigBee Configuration Commands to Coop Control"
+    return cmd + refresh()
+}
+
+

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -0,0 +1,164 @@
+/**
+ *  PlantLink
+ *
+ *  This device type takes sensor data and converts it into a json packet to send to myplantlink.com
+ *  where its values will be computed for soil and plant type to show user readable values of how your
+ *  specific plant is doing.
+ *
+ *
+ *  Copyright 2015 Oso Technologies
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+import groovy.json.JsonBuilder
+
+metadata {
+    definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
+        capability "Sensor"
+
+        command "setStatusIcon"
+        command "setPlantFuelLevel"
+        command "setBatteryLevel"
+        command "setInstallSmartApp"
+
+        attribute "plantStatus","string"
+        attribute "plantFuelLevel","number"
+        attribute "linkBatteryLevel","string"
+        attribute "installSmartApp","string"
+
+        fingerprint profileId: "0104", inClusters: "0000,0001,0B04"
+    }
+
+    simulator {
+        status "battery": "read attr - raw: C0720100010A000021340A, dni: C072, endpoint: 01, cluster: 0001, size: 0A, attrId: 0000, encoding: 21, value: 0a34"
+        status "moisture": "read attr - raw: C072010B040A0001290000, dni: C072, endpoint: 01, cluster: 0B04, size: 0A, attrId: 0100, encoding: 29, value: 0000"
+    }
+
+    tiles {
+        standardTile("Title", "device.label") {
+            state("label", label:'PlantLink ${device.label}')
+        }
+
+        valueTile("plantMoistureTile", "device.plantFuelLevel", width: 1, height: 1) {
+            state("plantMoisture", label: '${currentValue}% Moisture')
+        }
+
+        valueTile("plantStatusTextTile", "device.plantStatus", decoration: "flat", width: 2, height: 2) {
+            state("plantStatusTextTile", label:'${currentValue}')
+        }
+
+        valueTile("battery", "device.linkBatteryLevel" ) {
+            state("battery", label:'${currentValue}% battery')
+        }
+        
+        valueTile("installSmartApp","device.installSmartApp", decoration: "flat", width: 3, height: 1) {
+        	state "needSmartApp", label:'Please install SmartApp "Required PlantLink Connector"', defaultState:true
+            state "connectedToSmartApp", label:'Connected to myplantlink.com'
+        }
+
+        main "plantStatusTextTile"
+        details(['plantStatusTextTile', "plantMoistureTile", "battery", "installSmartApp"])
+    }
+}
+
+def setStatusIcon(value){
+    def status = ''
+    switch (value) {
+    	case '0':
+	        status = 'Needs Water'
+            break
+    	case '1':
+        	status = 'Dry'
+            break
+    	case '2':
+   		case '3':
+        	status = 'Good'
+            break
+        case '4':
+        	status = 'Too Wet'
+            break
+    	case 'No Soil':
+        	status = 'Too Dry'
+        	setPlantFuelLevel(0)
+            break
+    	case 'Recently Watered':
+        	status = 'Watered'
+            setPlantFuelLevel(100)
+    		break
+    	case 'Low Battery':
+        	status = 'Low Battery'
+    		break
+    	case 'Waiting on First Measurement':
+	        status = 'Calibrating'
+            break
+    	default:
+        	status = "?"
+            break
+    }
+    sendEvent("name":"plantStatus", "value":status, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setPlantFuelLevel(value){
+    sendEvent("name":"plantFuelLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)	
+}
+
+def setBatteryLevel(value){
+    sendEvent("name":"linkBatteryLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setInstallSmartApp(value){
+	sendEvent("name":"installSmartApp", "value":value)
+}
+
+def parse(String description) {
+	log.debug description
+	def description_map = parseDescriptionAsMap(description)
+    def event_name = ""
+    def measurement_map = [
+            type: "link",
+            signal: "0x00",
+            zigbeedeviceid: device.zigbeeId,
+            created: new Date().time /1000 as int
+    ]
+    if (description_map.cluster == "0001"){
+        /* battery voltage in mV (device needs minimium 2.1v to run) */
+        log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
+        event_name = "battery_status"
+        measurement_map["battery"] = "0x${description_map.value}"
+        
+    } else if (description_map.cluster == "0B04"){
+        /* raw moisture reading (needs to be sent to plantlink for soil/plant type conversion) */
+        log.debug "PlantLink - id ${device.zigbeeId}  raw moisture ${description_map.value}"
+        measurement_map["moisture"] = "0x${description_map.value}"
+        event_name = "moisture_status"
+        
+    } else{
+        log.debug "PlantLink - id ${device.zigbeeId} Unknown '${description}'"
+        return
+    }
+    
+    def json_builder = new JsonBuilder(measurement_map)
+    def result = createEvent(name: event_name, value: json_builder.toString())
+    return result
+}
+
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        if(nameAndValue.length == 2){
+	        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        }else{
+        	map += []
+        }
+    }
+}

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -0,0 +1,627 @@
+/**
+ *  Spruce Controller - Pre Release V2 10/11/2015
+ *
+ *  Copyright 2015 Plaid Systems
+ *
+ *	Author: NC
+ *	Date: 2015-11
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ -----------V3 updates-11-2015------------
+ -Start program button updated to signal schedule check in Scheduler
+ 11/17 alarm "0" -> 0	(ln 305)
+ */
+
+metadata {
+	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
+		capability "Switch"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Actuator"
+        capability "Valve"        
+		
+        attribute "switch", "string"
+        attribute "switch1", "string"
+		attribute "switch2", "string"
+		attribute "switch8", "string"
+		attribute "switch5", "string"
+		attribute "switch3", "string"
+		attribute "switch4", "string"
+		attribute "switch6", "string"
+		attribute "switch7", "string"
+        attribute "switch9", "string"
+		attribute "switch10", "string"
+		attribute "switch11", "string"
+		attribute "switch12", "string"
+		attribute "switch13", "string"
+		attribute "switch14", "string"
+		attribute "switch15", "string"
+        attribute "switch16", "string"
+		attribute "status", "string"        
+        
+        command "programOn"
+        command "programOff"
+        command "on"
+        command "off"
+        command "z1on"
+		command "z1off"
+		command "z2on"
+		command "z2off"        
+		command "z3on"
+		command "z3off"
+		command "z4on"
+		command "z4off"
+		command "z5on"
+		command "z5off"
+		command "z6on"
+		command "z6off"
+		command "z7on"
+		command "z7off"
+		command "z8on"
+		command "z8off"
+        command "z9on"
+        command "z9off"
+		command "z10on"
+		command "z10off"
+		command "z11on"
+		command "z11off"
+		command "z12on"
+		command "z12off"
+		command "z13on"
+		command "z13off"
+		command "z14on"
+		command "z14off"
+		command "z15on"
+		command "z15off"
+		command "z16on"
+		command "z16off"
+        command "offtime"
+        
+        command "refresh"        
+        command "rain"
+        command "manual"
+        command "setDisplay"
+        
+        command "settingsMap"
+        command "writeTime"
+        command "writeType"        
+        command "notify"
+        command "updated"
+
+		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
+		
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		
+		// reply messages
+		
+	}
+    preferences {
+    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
+    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
+    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
+	}
+
+	// UI tile definitions
+	tiles {
+    
+    	standardTile("status", "device.status") {            
+            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
+            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
+            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
+            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
+            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
+            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#52c435"
+            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
+            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
+            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#f2a51f"           
+            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
+            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
+            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#888888"
+            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
+            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
+        }
+		standardTile("switch", "device.switch") {			
+			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
+            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
+            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
+            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
+		}
+        standardTile("rainsensor", "device.rainsensor") {			
+			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
+            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
+		}    	
+        standardTile("switch1", "device.switch1") {			
+			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch2", "device.switch2") {            
+            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
+			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
+            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
+            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
+            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
+            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
+            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
+			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
+            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
+			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
+            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
+            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
+            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
+            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}		
+        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
+            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", action: "refresh", icon:"st.secondary.refresh"            
+		}
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}		
+		
+        main (["status"])        
+        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
+    }    
+}
+
+def programOn(){
+    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
+    }
+    
+def programOff(){    
+    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
+    off()
+    }
+    
+def updated(){
+	log.debug "updated"    
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {	
+	//log.debug "Parse description $description"
+    def result = null
+    def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		//log.debug "Desc Map: $descMap"
+        //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
+		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
+			log.debug "Zone"
+            map = getZone(descMap)            
+		}
+        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
+			log.debug "Alarm"            
+            map = getAlarm(descMap)
+            }
+	}     
+	
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map $result"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getZone(descMap){
+	def map = [:]
+    
+    def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
+    
+    String onoff
+    if(descMap.value == "00"){
+    	onoff = "off"        
+    }    
+    else onoff = "on"
+            
+    if (EP == 1){
+    	map.name = "switch"
+        map.value = onoff
+        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
+        }
+        
+    else if (EP == 18) {
+        map.name = "rainsensor"
+    	map.value = "rainSensor" + onoff
+        map.descriptionText = "${device.displayName} rain sensor is $onoff"
+        }
+   	else {
+        EP -= 1
+        map.name = "switch" + EP
+    	map.value = "z" + EP + onoff
+    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
+    	}
+        
+    map.isStateChange = true 
+    map.displayed = true    
+    return map
+}
+
+def getAlarm(descMap){
+	def map = [:]
+    map.name = "status"
+    def alarmID = Integer.parseInt(descMap.value.trim(), 16)
+    log.debug "${alarmID}"
+    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
+    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
+	map.value = "alarm"
+    map.isStateChange = true
+    map.displayed = true
+    return map        
+}
+
+//status notify and change status
+def notify(value, text){	
+	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
+
+}
+
+//prefrences - rain sensor, manual time
+def rain() {
+    log.debug "Rain $RainEnable"
+    if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
+    else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
+}
+def manual(){
+	log.debug "Time $ManualTime"
+    def mTime = 10
+    if (ManualTime) mTime = ManualTime
+    def manualTime = hex(mTime)
+    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"
+    
+    }
+
+//write switch time settings map
+def settingsMap(WriteTimes, attrType){
+	log.debug WriteTimes    
+	
+    def i = 1
+    def runTime
+    def sendCmds = []
+    while(i <= 17){
+    	  
+    	if (WriteTimes."${i}"){        	
+        	runTime = hex(Integer.parseInt(WriteTimes."${i}"))
+        	log.debug "${i} : $runTime"
+		
+        	if (attrType == 4001) sendCmds.push("st wattr 0x${device.deviceNetworkId} ${i} 0x06 0x4001 0x21 {00${runTime}}")
+        	else sendCmds.push("st wattr 0x${device.deviceNetworkId} ${i} 0x06 0x4002 0x21 {00${runTime}}")
+            sendCmds.push("delay 500")
+        }
+        i++
+    }    
+    return sendCmds
+}
+
+//send switch time
+def writeType(wEP, cycle){
+	log.debug "wt ${wEP} ${cycle}"
+    "st wattr 0x${device.deviceNetworkId} ${wEP} 0x06 0x4001 0x21 {00" + hex(cycle) + "}"
+    }
+//send switch off time
+def writeTime(wEP, runTime){    
+    "st wattr 0x${device.deviceNetworkId} ${wEP} 0x06 0x4002 0x21 {00" + hex(runTime) + "}"
+    }
+
+//set reporting and binding
+def configure() {
+
+	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
+	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+    
+    def configCmds = [	
+        //program on/off
+        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x09 {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //zones 1-8
+        "zdo bind 0x${device.deviceNetworkId} 2 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 3 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} 4 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 5 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 6 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 7 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 8 1 0x0F {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 9 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //zones 9-16
+        "zdo bind 0x${device.deviceNetworkId} 10 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 11 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} 12 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 13 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 14 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 15 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 16 1 0x0F {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 17 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //rain sensor
+        "zdo bind 0x${device.deviceNetworkId} 18 1 0x0F {${device.zigbeeId}} {}",
+        
+        "zcl global send-me-a-report 6 0 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+       
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 2", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 3", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 4", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 5", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 6", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 7", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 8", "delay 500",      
+        
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 9", "delay 500",
+       
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 10", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 11", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 12", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 13", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 14", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 15", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 16", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 17", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 18", "delay 500",
+        
+        "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + rain() + manual()
+}
+
+
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}    
+
+def refresh() {
+
+	log.debug "refresh"
+    def refreshCmds = [
+	        
+        "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 2 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 3 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 4 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 5 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 6 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 7 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 8 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 9 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 10 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 11 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 12 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 13 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 14 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 15 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 16 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 17 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
+ 	
+    ]
+    return refreshCmds + rain() + manual()
+}
+
+// Commands to device
+//zones on - 8
+def on() {
+    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
+    log.debug "on"
+    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"    
+}
+def off() {
+    log.debug "off"
+    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"    
+}
+def z1on() {	
+    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
+}
+def z1off() {    
+    "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
+}
+def z2on() {	
+    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+}
+def z2off() {    
+    "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
+}
+def z3on() {        
+    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+}
+def z3off() {	
+    "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
+}
+def z4on() {	
+    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+}
+def z4off() {    
+    "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
+}
+def z5on() {	
+	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+}
+def z5off() {
+	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
+}
+def z6on() {
+	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+}
+def z6off() {
+    "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
+}
+def z7on() {
+	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+}
+def z7off() {
+	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
+}
+def z8on() {
+	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+}
+def z8off() {
+	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
+}
+
+//zones 9 - 16
+def z9on() {	
+    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+}
+def z9off() {	    
+    "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
+}
+def z10on() {	
+    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+}
+def z10off() {    
+    "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
+}
+def z11on() {        
+    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+}
+def z11off() {	
+    "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
+}
+def z12on() {	
+    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+}
+def z12off() {    
+    "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
+}
+def z13on() {	
+	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+}
+def z13off() {
+	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
+}
+def z14on() {
+	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+}
+def z14off() {
+    "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
+}
+def z15on() {
+	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+}
+def z15off() {
+	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
+}
+def z16on() {
+	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+}
+def z16off() {
+	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
+}

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -0,0 +1,397 @@
+/**
+ *  Spruce Sensor -Pre-release V2 10/8/2015
+ *
+ *  Copyright 2014 Plaid Systems
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ -------10/20/2015 Updates--------
+ -Fix/add battery reporting interval to update
+ -remove polling and/or refresh(?)
+ */
+metadata {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
+		
+		capability "Configuration"
+		capability "Battery"
+        capability "Relative Humidity Measurement"
+        capability "Temperature Measurement"
+        capability "Sensor"
+        //capability "Polling"
+		
+        attribute "maxHum", "string"
+        attribute "minHum", "string"        
+        
+        command "resetHumidity"
+        command "refresh"
+        
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
+	}
+
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph", title: ""
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+        input "interval", "number", title: "Measurement Interval 1-120 minutes (default: 10 minutes)", description: "Set how often you would like to check soil moisture in minutes", range: "1..120", defaultValue: 10, displayDuringSetup: false
+        input "resetMinMax", "bool", title: "Reset Humidity min and max", required: false, displayDuringSetup: false
+      }
+
+	tiles {
+		valueTile("temperature", "device.temperature", canChangeIcon: false, canChangeBackground: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("humidity", "device.humidity", width: 2, height: 2, canChangeIcon: false, canChangeBackground: true) {
+			state "humidity", label:'${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		}
+        
+        valueTile("maxHum", "device.maxHum", canChangeIcon: false, canChangeBackground: false) {
+			state "maxHum", label:'High ${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		}
+		valueTile("minHum", "device.minHum", canChangeIcon: false, canChangeBackground: false) {
+			state "minHum", label:'Low ${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		} 
+ 
+		valueTile("battery", "device.battery", decoration: "flat", canChangeIcon: false, canChangeBackground: false) {
+			state "battery", label:'${currentValue}% battery'
+		}
+        
+		main  (["humidity"])
+		details(["humidity","maxHum","minHum","temperature","battery"])
+	}
+}
+
+def parse(String description) {
+	log.debug "Parse description $description config: ${device.latestValue('configuration')} interval: $interval"      
+    
+    Map map = [:]
+    
+    if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}    
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    def result = map ? createEvent(map) : null
+ 	
+    //check in configuration change
+    if (!device.latestValue('configuration')) result = poll()
+    if (device.latestValue('configuration').toInteger() != interval && interval != null) {  	
+        result = poll()            
+    }
+ 	log.debug "result: $result"
+    return result
+    
+}
+
+
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def linkText = getLinkText(device)
+	//log.debug "Catchall"
+    def descMap = zigbee.parse(description)
+    
+    //check humidity configuration is complete
+    if (descMap.command == 0x07 && descMap.clusterId == 0x0405){    	
+        def configInterval = 10
+        if (interval != null) configInterval = interval        
+        sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration Successful")        
+        //setConfig()
+        log.debug "config complete"        
+        //return resultMap = [name: 'configuration', value: configInterval, descriptionText: "Settings configured successfully"]                
+    }
+    else if (descMap.command == 0x0001){    
+    	def hexString = "${hex(descMap.data[5])}" + "${hex(descMap.data[4])}"
+    	def intString = Integer.parseInt(hexString, 16)    
+    	//log.debug "command: $descMap.command clusterid: $descMap.clusterId $hexString $intString"
+    
+    	if (descMap.clusterId == 0x0402){    	
+            def value = getTemperature(hexString)
+            resultMap = getTemperatureResult(value)    
+        }
+        else if (descMap.clusterId == 0x0405){
+            def value = Math.round(new BigDecimal(intString / 100)).toString()
+            resultMap = getHumidityResult(value)
+
+        }
+        else return null
+    }
+    else return null 
+    
+    return resultMap
+}    
+    
+private Map parseReportAttributeMessage(String description) {	
+    def descMap = parseDescriptionAsMap(description)
+	log.debug "Desc Map: $descMap"
+    log.debug "Report Attributes"
+ 
+	Map resultMap = [:]
+	if (descMap.cluster == "0001" && descMap.attrId == "0000") {		
+        resultMap = getBatteryResult(descMap.value)
+	}    
+    return resultMap
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]  
+        
+	log.debug "parseCustom"
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	else if (description?.startsWith('humidity: ')) {
+		def pct = (description - "humidity: " - "%").trim()
+		if (pct.isNumber()) {        	
+            def value = Math.round(new BigDecimal(pct)).toString()
+			resultMap = getHumidityResult(value)
+		} else {
+			log.error "invalid humidity: ${pct}"
+		}    
+	}
+	return resultMap
+}
+ 
+private Map getHumidityResult(value) {
+    def linkText = getLinkText(device)
+    def maxHumValue = 0
+    def minHumValue = 0
+    if (device.currentValue("maxHum") != null) maxHumValue = device.currentValue("maxHum").toInteger()
+    if (device.currentValue("minHum") != null) minHumValue = device.currentValue("minHum").toInteger()
+    log.debug "Humidity max: ${maxHumValue} min: ${minHumValue}"
+    def compare = value.toInteger()
+    
+    if (compare > maxHumValue) {
+        sendEvent(name: 'maxHum', value: value, unit: '%', descriptionText: "${linkText} soil moisture high is ${value}%")
+        }
+    else if (((compare < minHumValue) || (minHumValue <= 2)) && (compare != 0)) {
+        sendEvent(name: 'minHum', value: value, unit: '%', descriptionText: "${linkText} soil moisture low is ${value}%")
+        }    
+    
+    return [
+    	name: 'humidity',
+    	value: value,
+    	unit: '%',
+        descriptionText: "${linkText} soil moisture is ${value}%"
+    ]
+}
+
+
+
+def getTemperature(value) {
+	def celsius = (Integer.parseInt(value, 16).shortValue()/100)
+    //log.debug "Report Temp $value : $celsius C"
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getTemperatureResult(value) {
+	log.debug "Temperature: $value"
+	def linkText = getLinkText(device)
+        
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset        
+	}
+	def descriptionText = "${linkText} is ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+private Map getBatteryResult(value) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+        
+    def result = [
+    	name: 'battery'
+    ]
+    	
+	def min = 2500   
+	def percent = ((Integer.parseInt(value, 16) - min) / 5)
+	percent = Math.max(0, Math.min(percent, 100.0))
+    result.value = Math.round(percent)
+    
+    def descriptionText
+    if (percent < 10) result.descriptionText = "${linkText} battery is getting low $percent %."
+	else result.descriptionText = "${linkText} battery is ${result.value}%"
+	
+	return result
+}
+
+def resetHumidity(){
+	def linkText = getLinkText(device)
+    def minHumValue = 0
+    def maxHumValue = 0
+    sendEvent(name: 'minHum', value: minHumValue, unit: '%', descriptionText: "${linkText} min soil moisture reset to ${minHumValue}%")
+    sendEvent(name: 'maxHum', value: maxHumValue, unit: '%', descriptionText: "${linkText} max soil moisture reset to ${maxHumValue}%")
+}	
+
+def setConfig(){
+	def configInterval = 100
+    if (interval != null) configInterval = interval        
+    sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
+}
+
+//when device preferences are changed
+def updated(){	
+    log.debug "device updated"
+    if (!device.latestValue('configuration')) configure()
+    else{
+    	if (resetMinMax == true) resetHumidity()
+        if (device.latestValue('configuration').toInteger() != interval && interval != null){    	
+            sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
+    	}
+    }
+}
+
+//poll
+def poll() {
+	log.debug "poll called"
+    List cmds = []
+    if (!device.latestValue('configuration')) cmds += configure()
+    else if (device.latestValue('configuration').toInteger() != interval && interval != null) { 
+    	cmds += intervalUpdate()
+    }
+    //cmds += refresh()
+    log.debug "commands $cmds"
+    return cmds?.collect { new physicalgraph.device.HubAction(it) }    
+}
+
+//update intervals
+def intervalUpdate(){
+	log.debug "intervalUpdate"
+    def minReport = 10
+    def maxReport = 610
+    if (interval != null) {
+    	minReport = interval
+        maxReport = interval * 61
+    }
+    [    
+    	"zcl global send-me-a-report 0x405 0x0000 0x21 $minReport $maxReport {6400}", "delay 500",
+    	"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "zcl global send-me-a-report 1 0x0000 0x21 0x0C 0 {0500}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+    ]    
+}
+
+def refresh() {
+	log.debug "refresh"
+    [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 1 0x405 0", "delay 500",    
+        "st rattr 0x${device.deviceNetworkId} 1 1 0"
+    ]    
+}
+
+//configure
+def configure() {
+	//set minReport = measurement in minutes
+    def minReport = 10
+    def maxReport = 610
+	    
+    //String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	//log.debug "zigbeeid ${device.zigbeeId} deviceId ${device.deviceNetworkId}"
+    if (!device.zigbeeId) sendEvent(name: 'configuration',value: 0, descriptionText: "Device Zigbee Id not found, remove and attempt to rejoin device")
+    else sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+    //log.debug "Configuring Reporting and Bindings. min: $minReport max: $maxReport "
+	
+    [
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x405 {${device.zigbeeId}} {}", "delay 500",                
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 1000",
+        
+        //temperature
+        "zcl global send-me-a-report 0x402 0x0000 0x29 1 0 {3200}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        
+        //min = soil measure interval
+        "zcl global send-me-a-report 0x405 0x0000 0x21 $minReport $maxReport {6400}",        
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",       
+     
+        //min = battery measure interval  1 = 1 hour     
+        "zcl global send-me-a-report 1 0x0000 0x21 0x0C 0 {0500}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	] + refresh()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -0,0 +1,128 @@
+/**
+ *  Simple Sync
+ *
+ *  Copyright 2015 Roomie Remote, Inc.
+ *
+ *	Date: 2015-09-22
+ */
+metadata
+{
+	definition (name: "Simple Sync", namespace: "roomieremote-agent", author: "Roomie Remote, Inc.")
+    {
+		capability "Media Controller"
+	}
+
+	// simulator metadata
+	simulator
+    {
+	}
+
+	// UI tile definitions
+	tiles
+    {
+		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
+        {
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
+		}
+        
+    	def detailTiles = ["mainTile"]
+		
+		main "mainTile"
+		details(detailTiles)
+	}
+}
+
+def parse(String description)
+{
+	def results = []
+	
+	try
+	{
+		def msg = parseLanMessage(description)
+		
+		if (msg.headers && msg.body)
+		{
+        	switch (msg.headers["X-Roomie-Echo"])
+			{
+            	case "getAllActivities":
+                    handleGetAllActivitiesResponse(msg)
+                	break
+			}
+    	}
+	}
+    catch (Throwable t)
+    {
+	    sendEvent(name: "parseError", value: "$t", description: description)
+    	throw t
+    }
+    
+    results
+}
+
+def handleGetAllActivitiesResponse(response)
+{
+	def body = parseJson(response.body)
+    
+    if (body.status == "success")
+    {
+	    def json = new groovy.json.JsonBuilder()
+	    def root = json activities: body.data
+	    def data = json.toString()
+    	
+	    sendEvent(name: "activities", value: data)
+    }
+}
+
+def getAllActivities(evt)
+{
+    def host = getHostAddress(device.deviceNetworkId)
+	
+	def action = new physicalgraph.device.HubAction(method: "GET",
+													path: "/api/v1/activities",
+													headers: [HOST: host, "X-Roomie-Echo": "getAllActivities"])
+	
+	action
+}
+
+def startActivity(evt)
+{
+    def uuid = evt
+    def host = getHostAddress(device.deviceNetworkId)
+    def activity = new groovy.json.JsonSlurper().parseText(device.currentValue('activities') ?: "{ 'activities' : [] }").activities.find { it.uuid == uuid }
+    def toggle = activity["toggle"]
+    def jsonMap = ["activity_uuid": uuid]
+    
+    if (toggle != null)
+    {
+        jsonMap << ["toggle_state": toggle ? "on" : "off"]
+    }
+    
+    def json = new groovy.json.JsonBuilder(jsonMap)
+    def jsonBody = json.toString()
+    def headers = [HOST: host, "Content-Type": "application/json"]
+    
+    def action = new physicalgraph.device.HubAction(method: "POST",
+													path: "/api/v1/runactivity",
+													body: jsonBody,
+													headers: headers)
+	
+    action
+}
+
+def getHostAddress(d)
+{
+	def parts = d.split(":")
+	def ip = convertHexToIP(parts[0])
+	def port = convertHexToInt(parts[1])
+	return ip + ":" + port
+}
+
+def String convertHexToIP(hex)
+{
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+def Integer convertHexToInt(hex)
+{
+	Integer.parseInt(hex,16)
+}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -0,0 +1,170 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
+        capability "Tone"
+        capability "Actuator"
+        capability "Presence Sensor"
+        capability "Sensor"
+        capability "Battery"
+        capability "Configuration"
+
+        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
+                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
+    }
+
+    preferences {
+        section {
+            image(name: 'educationalcontent', multiple: true, images: [
+                "http://cdn.device-gse.smartthings.com/Arrival/Arrival1.png",
+                "http://cdn.device-gse.smartthings.com/Arrival/Arrival2.png"
+                ])
+        }
+        section {
+            input "checkInterval", "enum", title: "Presence timeout (minutes)", description: "Tap to set",
+                    defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        }
+    }
+
+    tiles {
+        standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+        }
+        standardTile("beep", "device.beep", decoration: "flat") {
+            state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
+        }
+        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        main "presence"
+        details(["presence", "beep", "battery"])
+    }
+}
+
+def updated() {
+    startTimer()
+}
+
+def configure() {
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
+    log.debug "configure -- cmds: ${cmds}"
+    return cmds
+}
+
+def beep() {
+    log.debug "Sending Identify command to beep the sensor for 5 seconds"
+    return zigbee.command(0x0003, 0x00, "0500")
+}
+
+def parse(String description) {
+    state.lastCheckin = now()
+    handlePresenceEvent(true)
+
+    if (description?.startsWith('read attr -')) {
+        handleReportAttributeMessage(description)
+    }
+
+    return []
+}
+
+private handleReportAttributeMessage(String description) {
+    def descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+        handleBatteryEvent(Integer.parseInt(descMap.value, 16))
+    }
+}
+
+/**
+ * Create battery event from reported battery voltage.
+ *
+ * @param volts Battery voltage in .1V increments
+ */
+private handleBatteryEvent(volts) {
+	def descriptionText
+    if (volts == 0 || volts == 255) {
+        log.debug "Ignoring invalid value for voltage (${volts/10}V)"
+    }
+    else {
+        def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+                          22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+        def minVolts = 15
+        def maxVolts = 28
+
+        if (volts < minVolts)
+            volts = minVolts
+        else if (volts > maxVolts)
+            volts = maxVolts
+        def value = batteryMap[volts]
+        if (value != null) {
+            def linkText = getLinkText(device)
+            descriptionText = '{{ linkText }} battery was {{ value }}'
+            def eventMap = [
+                name: 'battery',
+                value: value,
+                descriptionText: descriptionText,
+                translatable: true
+            ]
+            log.debug "Creating battery event for voltage=${volts/10}V: ${linkText} ${eventMap.name} is ${eventMap.value}%"
+            sendEvent(eventMap)
+        }
+    }
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        log.debug "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        log.debug "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def descriptionText
+    if ( present )
+    	descriptionText = "{{ linkText }} has arrived"
+    else
+    	descriptionText = "{{ linkText }} has left"
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: descriptionText,
+        translatable: true
+    ]
+    log.debug "Creating presence event: ${device.displayName} ${eventMap.name} is ${eventMap.value}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    log.debug "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    log.debug "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    log.debug "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -0,0 +1,26 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 설정
+'''Set Device Image'''.ko=기기 이미지 설정
+'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
+'''Tap to set'''.ko=눌러서 설정
+'''Arrival Sensor'''.ko=도착알림 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
+# Events / Notifications
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+#==============================================================================

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  Cree Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -13,31 +13,32 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
-	definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
-		capability "Actuator"
+        capability "Actuator"
         capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
-	}
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
+    // UI tile definitions
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -62,18 +63,12 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getKnownDescription(description)
+    def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
+        sendEvent(resultMap)
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
         log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
@@ -87,13 +82,17 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -138,6 +138,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -0,0 +1,72 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Ecobee Sensor
+ *
+ *	Author: SmartThings
+ */
+metadata {
+	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Sensor"
+		capability "Temperature Measurement"
+		capability "Motion Sensor"
+		capability "Refresh"
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							// Celsius
+							[value: 0, color: "#153591"],
+							[value: 7, color: "#1e9cbb"],
+							[value: 15, color: "#90d2a7"],
+							[value: 23, color: "#44b621"],
+							[value: 28, color: "#f1d801"],
+							[value: 35, color: "#d04e00"],
+							[value: 37, color: "#bc2323"],
+							// Fahrenheit
+							[value: 40, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+			)
+		}
+
+		standardTile("motion", "device.motion") {
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["temperature","motion"])
+		details(["temperature","motion","refresh"])
+	}
+}
+
+def refresh() {
+	log.debug "refresh called"
+	poll()
+}
+
+void poll() {
+	log.debug "Executing 'poll' using parent SmartApp"
+	parent.pollChild()
+
+}

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -36,155 +36,73 @@
  *				Slider range from 0..100
  *	Change 9:	2015-03-06	(Juan Risso)
  *				Setlevel -> value to integer (to prevent smartapp calling this function from not working).
+ *	Change 10: 	2016-03-06	(Vinay Rao/Tom Manley)
+ *				changed 2/3rds of the file to clean up code and add zigbee library improvements
  *
  */
 
 metadata {
-	definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
 
-    	capability "Actuator"
+        capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-		capability "Sensor"
+        capability "Sensor"
         capability "Switch"
-		capability "Switch Level"
+        capability "Switch Level"
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
-	}
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
+    }
 
 	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821", nextState:"turningOff"
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff", nextState:"turningOn"
- 			state "turningOn", label:'${name}', action: "switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-            state "turningOff", label:'${name}', action: "switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-
-		main(["switch"])
-		details(["switch", "level", "levelSliderControl", "refresh"])
-	}
-
-	    preferences {
-
-        	input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
-            input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
 
+    preferences {
+        input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
+        input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
     }
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.trace description
-
-    if (description?.startsWith("on/off:")) {
-		log.debug "The bulb was sent a command to do something just now..."
-		if (description[-1] == "1") {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "On command was sent maybe from manually turning on? : Parse returned ${result?.descriptionText}"
-            return result
-        } else if (description[-1] == "0") {
-        	def result = createEvent(name: "switch", value: "off")
-            log.debug "Off command was sent : Parse returned ${result?.descriptionText}"
-            return result
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
+            sendEvent(resultMap)
         }
     }
-
-    def msg = zigbee.parse(description)
-
-	if (description?.startsWith("catchall:")) {
-		// log.trace msg
-		// log.trace "data: $msg.data"
-
-        def x = description[-4..-1]
-        // log.debug x
-
-        switch (x)
-        {
-
-        	case "0000":
-
-            	def result = createEvent(name: "switch", value: "off")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "1000":
-
-            	def result = createEvent(name: "switch", value: "off")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "0100":
-
-            	def result = createEvent(name: "switch", value: "on")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "1001":
-
-            	def result = createEvent(name: "switch", value: "on")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-        }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
-
-    if (description?.startsWith("read attr")) {
-
-        // log.trace description[27..28]
-        // log.trace description[-2..-1]
-
-    	if (description[27..28] == "0A") {
-
-        	// log.debug description[-2..-1]
-        	def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-			sendEvent( name: "level", value: i )
-        	sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-
-    	}
-
-    	else {
-
-    		if (description[-2..-1] == "00" && state.trigger == "setLevel") {
-        		// log.debug description[-2..-1]
-        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-				sendEvent( name: "level", value: i )
-        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-        	}
-
-        	if (description[-2..-1] == state.lvl) {
-        		// log.debug description[-2..-1]
-        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-				sendEvent( name: "level", value: i )
-        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-        	}
-
-    	}
-    }
-
 }
 
 def poll() {
-
-    [
-	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
-    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
+    def refreshCmds = [
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
+    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def updated() {
@@ -270,109 +188,63 @@ def updated() {
 }
 
 def on() {
-	state.lvl = "00"
     state.trigger = "on/off"
-
-    // log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    zigbee.on()
 }
 
 def off() {
-	state.lvl = "00"
     state.trigger = "on/off"
-
-    // log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    zigbee.off()
 }
 
 def refresh() {
-
-    [
-	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
-    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
+    def refreshCmds = [
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
-    poll()
 
+    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
 }
 
 def setLevel(value) {
-
-    def cmds = []
-	value = value as Integer
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} 1 8 0 {0000 ${state.rate}}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-    sendEvent(name: "level", value: value)
-    value = (value * 255 / 100)
-    def level = hex(value);
-
     state.trigger = "setLevel"
-    state.lvl = "${level}"
-
+    def cmd
+    def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {
-    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} ${state.rate}}"
+        def computedRate = convertRateValue(state.rate)
+        cmd = zigbee.setLevel(value, computedRate)
+        delayForRefresh += computedRate * 100       //converting tenth of second to milliseconds
     }
     else {
-    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 1500}"
+        cmd = zigbee.setLevel(value, 20)
+        delayForRefresh += 2000
     }
+    cmd + ["delay $delayForRefresh"] + zigbee.levelRefresh()
+}
 
-    log.debug cmds
-    cmds
+int convertRateValue(rate) {
+    int convertedRate = 0
+    switch (rate)
+    {
+        case "0000":
+            convertedRate = 0
+            break
+
+        case "1500":
+            convertedRate = 20      //0015 hex in int is 2.1
+            break
+
+        case "2500":
+            convertedRate = 35      //0025 hex in int is 3.7
+            break
+
+        case "3500":
+            convertedRate = 50      //0035 hex in int is 5.1
+            break
+    }
+    convertedRate
 }
 
 def configure() {
-
-	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 500",
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
+    log.debug "Configuring Reporting and Bindings."
+    return zigbee.onOffConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}

devicetypes/smartthings/gentle-wake-up-controller.src/gentle-wake-up-controller.groovy

@@ -0,0 +1,126 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+    definition (name: "Gentle Wake Up Controller", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch"
+        capability "Timed Session"
+
+        attribute "percentComplete", "number"
+
+        command "setPercentComplete", ["number"]
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles(scale: 2) {
+
+        multiAttributeTile(name: "richTile", type:"generic", width:6, height:4) {
+            tileAttribute("sessionStatus", key: "PRIMARY_CONTROL") {
+                attributeState "cancelled", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "running"
+                attributeState "stopped", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "cancelled"
+                attributeState "running", action: "timed session.stop", icon: "http://f.cl.ly/items/0B3y3p2V3X2l3P3y3W09/stopbutton.png", backgroundColor: "#79b821", nextState: "cancelled"
+            }
+            tileAttribute("timeRemaining", key: "SECONDARY_CONTROL") {
+                attributeState "timeRemaining", label:'${currentValue} remaining'
+            }
+            tileAttribute("percentComplete", key: "SLIDER_CONTROL") {
+                attributeState "percentComplete", action: "timed session.setTimeRemaining"
+            }
+        }
+
+        // start/stop
+        standardTile("sessionStatusTile", "sessionStatus", width: 1, height: 1, canChangeIcon: true) {
+            state "cancelled", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
+            state "stopped", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
+            state "running", label: "Running", action: "timed session.stop", backgroundColor: "#79b821", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
+        }
+
+        // duration
+        valueTile("timeRemainingTile", "timeRemaining", decoration: "flat", width: 2) {
+            state "timeRemaining", label:'${currentValue} left'
+        }
+        controlTile("percentCompleteTile", "percentComplete", "slider", height: 1, width: 3) {
+            state "percentComplete", action: "timed session.setTimeRemaining"
+        }
+
+        main "sessionStatusTile"
+        details "richTile"
+//        details(["richTile", "sessionStatusTile", "timeRemainingTile", "percentCompleteTile"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "Parsing '${description}'"
+    // TODO: handle 'switch' attribute
+    // TODO: handle 'level' attribute
+    // TODO: handle 'sessionStatus' attribute
+    // TODO: handle 'timeRemaining' attribute
+
+}
+
+// handle commands
+def on() {
+    log.debug "Executing 'on'"
+    startDimming()
+}
+
+def off() {
+    log.debug "Executing 'off'"
+    stopDimming()
+}
+
+def setTimeRemaining(percentComplete) {
+    log.debug "Executing 'setTimeRemaining' to ${percentComplete}% complete"
+    parent.jumpTo(percentComplete)
+}
+
+def start() {
+    log.debug "Executing 'start'"
+    startDimming()
+}
+
+def stop() {
+    log.debug "Executing 'stop'"
+    stopDimming()
+}
+
+def pause() {
+    log.debug "Executing 'pause'"
+    // TODO: handle 'pause' command
+}
+
+def cancel() {
+    log.debug "Executing 'cancel'"
+    stopDimming()
+}
+
+def startDimming() {
+    log.trace "startDimming"
+    log.debug "parent: ${parent}"
+    parent.start("controller")
+}
+
+def stopDimming() {
+    log.trace "stopDimming"
+    log.debug "parent: ${parent}"
+    parent.stop("controller")
+}
+
+def controllerEvent(eventData) {
+    log.trace "controllerEvent"
+    sendEvent(eventData)
+}

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -80,19 +80,12 @@ def parse(String description) {
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
-	// log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
+	log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
 	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.multiinstancev1.MultiInstanceCmdEncap cmd) {
-	def encapsulated = null
-	if (cmd.respondsTo("encapsulatedCommand")) {
-		encapsulated = cmd.encapsulatedCommand()
-	} else {
-		def hex1 = { n -> String.format("%02X", n) }
-		def sorry = "command: ${hex1(cmd.commandClass)}${hex1(cmd.command)}, payload: " + cmd.parameter.collect{ hex1(it) }.join(" ")
-		encapsulated = zwave.parse(sorry, [0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
-	}
+	def encapsulated = cmd.encapsulatedCommand([0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
 	return encapsulated ? zwaveEvent(encapsulated) : null
 }
 

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -0,0 +1,224 @@
+/**
+ *  Hue Bloom
+ *
+ *  Philips Hue Type "Color Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Hue Bloom", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+        command "reset"
+        command "refresh"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles (scale: 2){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+
+		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["rich-control"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+void on() {
+	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (verifyPercent(percent)) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
+    }
+}
+
+void setSaturation(percent) {
+    log.debug "Executing 'setSaturation'"
+    if (verifyPercent(percent)) {
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
+    }
+}
+
+void setHue(percent) {
+    log.debug "Executing 'setHue'"
+    if (verifyPercent(percent)) {
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
+    }
+}
+
+void setColor(value) {
+    log.debug "setColor: ${value}, $this"
+    def events = []
+    def validValues = [:]
+
+    if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
+        validValues.hue = value.hue
+    }
+    if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
+        validValues.saturation = value.saturation
+    }
+    if (value.hex != null) {
+        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
+            validValues.hex = value.hex
+        } else {
+            log.warn "$value.hex is not a valid color"
+        }
+    }
+    if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
+        validValues.level = value.level
+    }
+    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
+        validValues.switch = "off"
+    } else {
+        events << createEvent(name: "switch", value: "on")
+        validValues.switch = "on"
+    }
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
+    }
+}
+
+void reset() {
+    log.debug "Executing 'reset'"
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
+}
+
+void setAdjustedColor(value) {
+    if (value) {
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
+        // Needed because color picker always sends 100
+        adjusted.level = null
+        setColor(adjusted)
+    } else {
+        log.warn "Invalid color input"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+
+def verifyPercent(percent) {
+    if (percent == null)
+        return false
+    else if (percent >= 0 && percent <= 100) {
+        return true
+    } else {
+        log.warn "$percent is not 0-100"
+        return false
+    }
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -17,16 +17,13 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+			tileAttribute ("", key: "PRIMARY_CONTROL") {
 	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
-			}    
+			}
 	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
 	            attributeState "default", label:'SN: ${currentValue}'
-			}    
-        }    
-		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
-			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
-		}
+			}
+        }
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
@@ -34,7 +31,7 @@ metadata {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
-		main (["icon"])
+		main (["rich-control"])
 		details(["rich-control", "networkAddress"])
 	}
 }
@@ -75,6 +72,7 @@ def parse(description) {
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
+                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,9 +1,11 @@
-
 /**
  *  Hue Bulb
  *
+ *  Philips Hue Type "Extended Color Light"
+ *
  *  Author: SmartThings
  */
+
 // for the UI
 metadata {
 	// Automatically generated. Make future change here.
@@ -11,13 +13,14 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-                command "reset"        
-                command "refresh"
+        command "reset"
+        command "refresh"
 	}
 
 	simulator {
@@ -25,7 +28,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,34 +36,45 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+
+		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-	}
 
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
+		main(["rich-control"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
 }
 
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
 	def results = []
+
 	def map = description
 	if (description instanceof String)  {
 		log.debug "Hue Bulb stringToMap - ${map}"
 		map = stringToMap(description)
 	}
+
 	if (map?.name && map?.value) {
 		results << createEvent(name: "${map?.name}", value: "${map?.value}")
 	}
@@ -68,17 +82,17 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
+void on() {
 	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
+void off() {
 	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def nextLevel() {
+void nextLevel() {
 	def level = device.latestValue("level") as Integer ?: 0
 	if (level <= 100) {
 		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
@@ -89,55 +103,105 @@ def nextLevel() {
 	setLevel(level)
 }
 
-def setLevel(percent) {
-	log.debug "Executing 'setLevel'"
-	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent)
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (verifyPercent(percent)) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
+    }
 }
 
-def setSaturation(percent) {
-	log.debug "Executing 'setSaturation'"
-	parent.setSaturation(this, percent)
-	sendEvent(name: "saturation", value: percent)
+void setSaturation(percent) {
+    log.debug "Executing 'setSaturation'"
+    if (verifyPercent(percent)) {
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
+    }
 }
 
-def setHue(percent) {
-	log.debug "Executing 'setHue'"
-	parent.setHue(this, percent)
-	sendEvent(name: "hue", value: percent)
+void setHue(percent) {
+    log.debug "Executing 'setHue'"
+    if (verifyPercent(percent)) {
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
+    }
 }
 
-def setColor(value) {
-	log.debug "setColor: ${value}, $this"
-	parent.setColor(this, value)
-	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
-	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
-	if (value.hex) { sendEvent(name: "color", value: value.hex)}
-	if (value.level) { sendEvent(name: "level", value: value.level)}
-	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
+void setColor(value) {
+    log.debug "setColor: ${value}, $this"
+    def events = []
+    def validValues = [:]
+
+    if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
+        validValues.hue = value.hue
+    }
+    if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
+        validValues.saturation = value.saturation
+    }
+    if (value.hex != null) {
+        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
+            validValues.hex = value.hex
+        } else {
+            log.warn "$value.hex is not a valid color"
+        }
+    }
+    if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
+        validValues.level = value.level
+    }
+    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
+        validValues.switch = "off"
+    } else {
+        events << createEvent(name: "switch", value: "on")
+        validValues.switch = "on"
+    }
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
+    }
 }
 
-def reset() {
-	log.debug "Executing 'reset'"
-    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+void reset() {
+    log.debug "Executing 'reset'"
+    def value = [level:100, saturation:56, hue:23]
     setAdjustedColor(value)
-	parent.poll()
+    parent.poll()
 }
 
-def setAdjustedColor(value) {
-	if (value) {
+void setAdjustedColor(value) {
+    if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
         adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
-        adjusted.level = null 
+        adjusted.level = null
         setColor(adjusted)
+    } else {
+        log.warn "Invalid color input"
     }
 }
 
-def refresh() {
-	log.debug "Executing 'refresh'"
-	parent.manualRefresh()
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -156,3 +220,14 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
+
+def verifyPercent(percent) {
+    if (percent == null)
+        return false
+    else if (percent >= 0 && percent <= 100) {
+        return true
+    } else {
+        log.warn "$percent is not 0-100"
+        return false
+    }
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,6 +1,8 @@
 /**
  *  Hue Lux Bulb
  *
+ *  Philips Hue Type "Dimmable Light"
+ *
  *  Author: SmartThings
  */
 // for the UI
@@ -12,14 +14,14 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-       
-        command "refresh"       
+
+        command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-    
+
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -31,29 +33,19 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
         }
-    
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-        }
-        
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
-           
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }        
 
-        main(["switch"])
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
         details(["rich-control", "refresh"])
-    }    
+    }
 }
 
 // parse events into attributes
@@ -74,23 +66,28 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
-	parent.on(this)
+void on() {
+	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
-	parent.off(this)
+void off() {
+	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def setLevel(percent) {
+void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
-	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent)
+    if (percent != null && percent >= 0 && percent <= 100) {
+		parent.setLevel(this, percent)
+		sendEvent(name: "level", value: percent)
+		sendEvent(name: "switch", value: "on")
+	} else {
+    	log.warn "$percent is not 0-100"
+    }
 }
 
-def refresh() {
+void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -84,6 +84,7 @@ def setHue(percentage) {
 			log.error("Bad setHue result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def setSaturation(percentage) {
@@ -97,6 +98,7 @@ def setSaturation(percentage) {
 			log.error("Bad setSaturation result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def setColor(Map color) {
@@ -122,13 +124,15 @@ def setColor(Map color) {
 	parent.logErrors(logObject:log) {
 		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
 		if (resp.status < 300) {
-			sendEvent(name: "color", value: color.hex)
+			if (color.hex)
+				sendEvent(name: "color", value: color.hex)
 			sendEvent(name: "switch", value: "on")
 			events.each { sendEvent(it) }
 		} else {
 			log.error("Bad setColor result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def setLevel(percentage) {
@@ -150,6 +154,7 @@ def setLevel(percentage) {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def setColorTemperature(kelvin) {
@@ -165,6 +170,7 @@ def setColorTemperature(kelvin) {
 		}
 
 	}
+	return []
 }
 
 def on() {
@@ -174,6 +180,7 @@ def on() {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
+	return []
 }
 
 def off() {
@@ -183,6 +190,7 @@ def off() {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
+	return []
 }
 
 def poll() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -84,6 +84,7 @@ def setLevel(percentage) {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def setColorTemperature(kelvin) {
@@ -99,6 +100,7 @@ def setColorTemperature(kelvin) {
 			log.error("Bad setColorTemperature result: [${resp.status}] ${resp.data}")
 		}
 	}
+	return []
 }
 
 def on() {
@@ -108,6 +110,7 @@ def on() {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
+	return []
 }
 
 def off() {
@@ -117,6 +120,7 @@ def off() {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
+	return []
 }
 
 def poll() {

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -0,0 +1,22 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 설정
+'''Set Device Image'''.ko=기기 이미지 설정
+# Events / Notifications
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''present'''.ko=집안
+'''not present'''.ko=외출

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,16 +1,19 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
  */
+ 
 metadata {
 	definition (name: "Mobile Presence", namespace: "smartthings", author: "SmartThings") {
 		capability "Presence Sensor"
@@ -41,6 +44,7 @@ def parse(String description) {
 	def isStateChange = isStateChange(device, name, value)
 
 	def results = [
+    	translatable: true,
 		name: name,
 		value: value,
 		unit: null,
@@ -72,8 +76,8 @@ private String parseValue(String description) {
 
 private parseDescriptionText(String linkText, String value, String description) {
 	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
+		case "present": return "{{ linkText }} has arrived"
+		case "not present": return "{{ linkText }} has left"
 		default: return value
 	}
 }
@@ -84,4 +88,4 @@ private getState(String value) {
 		case "not present": return "left"
 		default: return value
 	}
-}
+}

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,6 +24,7 @@ metadata {
         command "enrollResponse"
  
  
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -4,6 +4,7 @@
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
     that issue by using state variables
 */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
@@ -23,8 +24,8 @@ metadata {
         command "setAdjustedColor"
 
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
+        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
 
     }
 

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -19,11 +19,6 @@ metadata {
         capability "Sensor"
 
         attribute "colorName", "string"
-
-        // indicates that device keeps track of heartbeat (in state.heartbeat)
-        attribute "heartbeat", "string"
-        
-
     }
 
     // simulator metadata
@@ -75,9 +70,6 @@ metadata {
 def parse(String description) {
     //log.trace description
 
-    // save heartbeat (i.e. last time we got a message from device)
-    state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
     if (description?.startsWith("catchall:")) {
         if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
         {
@@ -132,7 +124,6 @@ def off() {
 }
 
 def refresh() {
-    sendEvent(name: "heartbeat", value: "alive", displayed:false)
     [
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",

devicetypes/smartthings/samsung-smart-tv.src/samsung-smart-tv.groovy

@@ -1,235 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Samsung TV
- *
- *  Author: SmartThings (juano23@gmail.com)
- *  Date: 2015-01-08
- */
- 
-metadata {
-	definition (name: "Samsung Smart TV", namespace: "smartthings", author: "SmartThings") {
-    		capability "switch" 
-            
-			command "mute" 
-			command "source"
-			command "menu"    
-            command "tools"           
-			command "HDMI"    
-            command "Sleep"
-            command "Up"
-            command "Down"
-            command "Left"
-            command "Right" 
-			command "chup" 
- 			command "chdown"               
-			command "prech"
-			command "volup"    
-            command "voldown"           
-            command "Enter"
-            command "Return"
-            command "Exit"
-            command "Info"            
-            command "Size"
-	}
-
-    standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "default", label:'TV', action:"switch.off", icon:"st.Electronics.electronics15", backgroundColor:"#ffffff"
-    }
-    standardTile("power", "device.switch", width: 1, height: 1, canChangeIcon: false) {
-        state "default", label:'', action:"switch.off", decoration: "flat", icon:"st.thermostat.heating-cooling-off", backgroundColor:"#ffffff"
-    }    
-    standardTile("mute", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Mute', action:"mute", icon:"st.custom.sonos.muted", backgroundColor:"#ffffff"
-    }    
-	standardTile("source", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Source', action:"source", icon:"st.Electronics.electronics15"
-    }
-	standardTile("tools", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Tools', action:"tools", icon:"st.secondary.tools"
-    }
-	standardTile("menu", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Menu', action:"menu", icon:"st.vents.vent"
-    }
-	standardTile("HDMI", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Source', action:"HDMI", icon:"st.Electronics.electronics15"
-    }
-    standardTile("Sleep", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Sleep', action:"Sleep", icon:"st.Bedroom.bedroom10"
-    }
-    standardTile("Up", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Up', action:"Up", icon:"st.thermostat.thermostat-up"
-    }
-    standardTile("Down", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Down', action:"Down", icon:"st.thermostat.thermostat-down"
-    }
-    standardTile("Left", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Left', action:"Left", icon:"st.thermostat.thermostat-left"
-    }
-    standardTile("Right", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Right', action:"Right", icon:"st.thermostat.thermostat-right"
-    }  
-	standardTile("chup", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'CH Up', action:"chup", icon:"st.thermostat.thermostat-up"
-    }
-	standardTile("chdown", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'CH Down', action:"chdown", icon:"st.thermostat.thermostat-down"
-    }
-	standardTile("prech", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Pre CH', action:"prech", icon:"st.secondary.refresh-icon"
-    }
-    standardTile("volup", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Vol Up', action:"volup", icon:"st.thermostat.thermostat-up"
-    }
-    standardTile("voldown", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Vol Down', action:"voldown", icon:"st.thermostat.thermostat-down"
-    }
-    standardTile("Enter", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Enter', action:"Enter", icon:"st.illuminance.illuminance.dark"
-    }
-    standardTile("Return", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Return', action:"Return", icon:"st.secondary.refresh-icon"
-    }
-    standardTile("Exit", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Exit', action:"Exit", icon:"st.locks.lock.unlocked"
-    }    
-    standardTile("Info", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Info', action:"Info", icon:"st.motion.acceleration.active"
-    }    
-    standardTile("Size", "device.switch", decoration: "flat", canChangeIcon: false) {
-        state "default", label:'Picture Size', action:"Size", icon:"st.contact.contact.open"
-    }      
-    main "switch"
-    details (["power","HDMI","Sleep","chup","prech","volup","chdown","mute","voldown", "menu", "Up", "tools", "Left", "Enter", "Right", "Return", "Down", "Exit", "Info","Size"])	
-}
-
-def parse(String description) {
-	return null
-}
-
-def off() {
-	log.debug "Turning TV OFF"
-    parent.tvAction("POWEROFF",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Power Off", displayed: true) 
-}
-
-def mute() {
-	log.trace "MUTE pressed"
-    parent.tvAction("MUTE",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Mute", displayed: true) 
-}
-
-def source() {
-	log.debug "SOURCE pressed"
-    parent.tvAction("SOURCE",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Source", displayed: true) 
-}
-
-def menu() {
-	log.debug "MENU pressed"
-    parent.tvAction("MENU",device.deviceNetworkId) 
-}
-
-def tools() {
-	log.debug "TOOLS pressed"
-    parent.tvAction("TOOLS",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Tools", displayed: true)     
-}
-
-def HDMI() {
-	log.debug "HDMI pressed"
-    parent.tvAction("HDMI",device.deviceNetworkId) 
-    sendEvent(name:"Command sent", value: "Source", displayed: true)
-}
-
-def Sleep() {
-	log.debug "SLEEP pressed"
-    parent.tvAction("SLEEP",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Sleep", displayed: true)
-}
-
-def Up() {
-	log.debug "UP pressed"
-    parent.tvAction("UP",device.deviceNetworkId)
-}
-
-def Down() {
-	log.debug "DOWN pressed"
-    parent.tvAction("DOWN",device.deviceNetworkId) 
-}
-
-def Left() {
-	log.debug "LEFT pressed"
-    parent.tvAction("LEFT",device.deviceNetworkId) 
-}
-
-def Right() {
-	log.debug "RIGHT pressed"
-    parent.tvAction("RIGHT",device.deviceNetworkId) 
-}
-
-def chup() {
-	log.debug "CHUP pressed"
-    parent.tvAction("CHUP",device.deviceNetworkId)
-    sendEvent(name:"Command", value: "Channel Up", displayed: true)         
-}
-
-def chdown() {
-	log.debug "CHDOWN pressed"
-    parent.tvAction("CHDOWN",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Channel Down", displayed: true)     
-}
-
-def prech() {
-	log.debug "PRECH pressed"
-    parent.tvAction("PRECH",device.deviceNetworkId)
-    sendEvent(name:"Command", value: "Prev Channel", displayed: true)       
-}
-
-def Exit() {
-	log.debug "EXIT pressed"
-    parent.tvAction("EXIT",device.deviceNetworkId) 
-}
-
-def volup() {
-	log.debug "VOLUP pressed"
-    parent.tvAction("VOLUP",device.deviceNetworkId)
-    sendEvent(name:"Command", value: "Volume Up", displayed: true)         
-}
-
-def voldown() {
-	log.debug "VOLDOWN pressed"
-    parent.tvAction("VOLDOWN",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Volume Down", displayed: true)         
-}
-
-def Enter() {
-	log.debug "ENTER pressed"
-    parent.tvAction("ENTER",device.deviceNetworkId) 
-}
-
-def Return() {
-	log.debug "RETURN pressed"
-    parent.tvAction("RETURN",device.deviceNetworkId) 
-}
-
-def Info() {
-	log.debug "INFO pressed"
-    parent.tvAction("INFO",device.deviceNetworkId) 
-	sendEvent(name:"Command", value: "Info", displayed: true)    
-}
-
-def Size() {
-	log.debug "PICTURE_SIZE pressed"
-    parent.tvAction("PICTURE_SIZE",device.deviceNetworkId) 
-    sendEvent(name:"Command", value: "Picture Size", displayed: true)
-}

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -5,7 +5,7 @@ metadata {
 		capability "Switch"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0006", outClusters: "0019"
+		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}
 
 	// simulator metadata

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -0,0 +1,26 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 설정
+'''Outlet'''.ko= 스마트 플러그 
+# Events descriptionText
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
+'''On'''.ko= 켜짐
+'''Off'''.ko=꺼짐
+'''Turning On'''.ko=켜는 중
+'''Turning Off'''.ko=끄는 중
+#==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,32 +1,29 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	SmartPower Outlet (CentraLite)
- *
- *	Author: SmartThings
- *	Date: 2015-08-23
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
+ *  under the License.
  */
+
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-
-		// indicates that device keeps track of heartbeat (in state.heartbeat)
-		attribute "heartbeat", "string"
+		capability "Health Check"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
@@ -58,10 +55,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'
@@ -81,9 +78,6 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	// save heartbeat (i.e. last time we got a message from device)
-	state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
 	def finalResult = zigbee.getKnownDescription(description)
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -91,22 +85,22 @@ def parse(String description) {
 		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
 
 	if (finalResult) {
-		log.info finalResult
+		log.info "final result = $finalResult"
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
+			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
 				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
 			*/
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
@@ -124,11 +118,11 @@ def on() {
 }
 
 def refresh() {
-	sendEvent(name: "heartbeat", value: "alive", displayed:false)
 	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -0,0 +1,35 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''Dry'''.ko=건조
+'''Wet'''.ko=누수
+'''dry'''.ko=건조
+'''wet'''.ko=누수
+'''battery'''.ko=배터리
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 설정
+'''Water Leak Sensor'''.ko=누수감지 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
+# Events descriptionText
+'''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
+'''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
+#==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,37 +1,39 @@
-/**
- *  SmartSense Moisture Sensor
+/*
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
+ *  under the License.
  */
+
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-        
-        command "enrollResponse"
+		capability "Health Check"
+
+		command "enrollResponse"
 
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
@@ -43,11 +45,11 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -78,7 +80,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -92,29 +94,29 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
             case 0x0402:
                 // temp is last 2 data values. reverse to swap endian
@@ -129,22 +131,22 @@ private Map parseCatchAllMessage(String description) {
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +155,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,42 +169,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMoistureResult('dry')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMoistureResult('wet')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0022': // Tamper Alarm
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			break
 
-        case '0x0024': // Supervision Report
-        	 log.debug 'dry with tamper alarm'
-        	resultMap = getMoistureResult('dry')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-        	log.debug 'water with tamper alarm'
-        	resultMap = getMoistureResult('wet')
-            break
+		case '0x0024': // Supervision Report
+			 log.debug 'dry with tamper alarm'
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0026': // Trouble/Failure
-            break
+		case '0x0025': // Restore Report
+			log.debug 'water with tamper alarm'
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -215,24 +217,48 @@ def getTemperature(value) {
 }
 
 private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
+	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
-    
-    def result = [
-    	name: 'battery'
-    ]
-    
+
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
+
 	def volts = rawValue / 10
-	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
+
+	if (rawValue == 0 || rawValue == 255) {}
 	else {
-		def minVolts = 2.1
-    	def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
+
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				result.value = Math.min(100, (int) pct * 100)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
+		}
 	}
 
 	return result
@@ -240,34 +266,44 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMoistureResult(value) {
-	log.debug 'water'
-	String descriptionText = "${device.displayName} is ${value}"
+	log.debug "water"
+    def descriptionText
+    if ( value == "wet" )
+    	descriptionText = '{{ device.displayName }} is wet'
+    else
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
 		name: 'water',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -275,34 +311,36 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [	
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-    [
+	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-    ]
+	]
 }
 
 private getEndpointId() {
@@ -314,19 +352,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
 }

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"
+        capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
@@ -39,17 +40,29 @@ metadata {
 				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
-		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
 			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
 			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
 			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
 		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+            state("temperature", label:'${currentValue}°',
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
+        }
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
-		main (["water", "temperature"])
-		details(["water", "temperature", "battery"])
+		main (["water", "temperatureState"])
+		details(["water", "temperatureState", "temperature", "battery"])
 	}
 }
 
@@ -115,7 +128,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 		map.descriptionText = "${device.displayName} is ${map.value}"
 	}
 	if(cmd.zwaveAlarmType ==  physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) {
-		map.name = "temperature"
+		map.name = "temperatureState"
 		if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"}
@@ -129,17 +142,30 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 	map
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
 {
 	def map = [:]
-	map.name = "water"
-	map.value = cmd.value ? "wet" : "dry"
-	map.descriptionText = "${device.displayName} is ${map.value}"
+	if(cmd.sensorType == 1) {
+		map.name = "temperature"
+        if(cmd.scale == 0) {
+        	map.value = getTemperature(cmd.scaledSensorValue)
+        } else {
+	        map.value = cmd.scaledSensorValue
+        }
+        map.unit = location.temperatureScale
+	}
 	map
 }
 
+def getTemperature(value) {
+	if(location.temperatureScale == "C"){
+		return value
+    } else {
+        return Math.round(celsiusToFahrenheit(value))
+    }
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd)
 {
 	log.debug "COMMAND CLASS: $cmd"
-}
-
+}

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -0,0 +1,33 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''battery'''.ko=배터리
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 설정
+'''Motion Sensor'''.ko=모션 센서
+'''motion'''.ko= 동작 감지 
+'''no motion'''.ko=동작 없음
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
+# Events descriptionText
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
+#==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,34 +1,37 @@
-/**
- *  SmartSense Motion/Temp Sensor
+/*
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
+ *  under the License.
  */
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-        capability "Temperature Measurement"
+		capability "Temperature Measurement"
 		capability "Refresh"
-        
-        command "enrollResponse"
+		capability "Health Check"
+
+		command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -45,7 +48,7 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
@@ -84,7 +87,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -95,55 +98,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
 
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 
 			case 0x0406:
-            	log.debug 'motion'
-                resultMap.name = 'motion'
-                break
-        }
-    }
+				log.debug 'motion'
+				resultMap.name = 'motion'
+				break
+		}
+	}
 
-    return resultMap
+	return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -152,7 +155,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -161,14 +164,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-    	resultMap = getMotionResult(value)
-    } 
- 
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -179,44 +182,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			log.debug 'motion with tamper alarm'
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-            break
+		case '0x0024': // Supervision Report
+			log.debug 'no motion with tamper alarm'
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0025': // Restore Report
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			log.debug 'motion with failure alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -229,30 +232,48 @@ def getTemperature(value) {
 }
 
 private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
+	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	log.debug rawValue
-
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
-	def descriptionText
 
-	if (rawValue == 0) {}
+	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
-		else if (volts > 0){
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
+
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				result.value = Math.min(100, (int) pct * 100)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
 		}
 	}
 
@@ -261,28 +282,33 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMotionResult(value) {
 	log.debug 'motion'
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
 		name: 'motion',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
@@ -297,6 +323,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
@@ -337,19 +365,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -14,6 +14,8 @@
  *
  */
 
+//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
@@ -25,10 +27,6 @@ metadata {
         
         command "enrollResponse"
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 	}
 
 	simulator {
@@ -233,7 +231,7 @@ private Map getBatteryResult(rawValue) {
 	def volts = rawValue / 10
 	def descriptionText
 
-	if (rawValue == 0) {}
+    if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -0,0 +1,41 @@
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
+#  under the License.
+# Korean (ko)
+# Device Preferences
+'''Yes'''.ko=예
+'''No'''.ko=아니요
+'''battery'''.ko=배터리
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+'''Tap to set'''.ko=눌러서 설정
+'''Give your device a name'''.ko=기기 이름 설정
+'''Multipurpose Sensor'''.ko=문 및 창 센서
+# Events descriptionText
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
+'''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
+'''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''Inactive'''.ko=비활성 상태
+'''Active'''.ko=활성 상태
+'''Open'''.ko= 열림이 감지될 때
+'''Closed'''.ko=닫힘
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,40 +1,42 @@
-/**
- *  SmartSense Multi
+/*
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
+ *  under the License.
  */
 
- metadata {
- 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
- 		
-        capability "Three Axis"
+metadata {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+
+		capability "Three Axis"
 		capability "Battery"
- 		capability "Configuration"
-        capability "Sensor"
+		capability "Configuration"
+		capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-        
+		capability "Health Check"
+
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
- 	}
+	}
 
- 	simulator {
+	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -51,7 +53,7 @@
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
- 	preferences {
+	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -61,30 +63,30 @@
 				])
 		}
 		section {
- 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
- 		}
-		section {
- 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
- 	}
+		section {
+			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+		}
+	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',
@@ -99,107 +101,117 @@
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
- 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
- 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
- 		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
  }
 
- def parse(String description) {
- 	
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
-    else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
+def parse(String description) {
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
 
- 	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : null
 
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
-
- private Map parseCatchAllMessage(String description) {
- 	Map resultMap = [:]
- 	def cluster = zigbee.parse(description)
-    log.debug cluster
- 	if (shouldProcessMessage(cluster)) {
- 		switch(cluster.clusterId) {
- 			case 0x0001:
- 			resultMap = getBatteryResult(cluster.data.last())
- 			break
-
- 			case 0xFC02:
-            log.debug 'ACCELERATION'
- 			break
-
- 			case 0x0402:
- 			log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-            }
-        }
-
-        return resultMap
-    }
-
-private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-    cluster.command == 0x0B ||
-    cluster.command == 0x07 ||
-    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
+	return result
 }
 
-private Map parseReportAttributeMessage(String description) {
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+			resultMap = getBatteryResult(cluster.data.last())
+			break
+
+			case 0xFC02:
+			log.debug 'ACCELERATION'
+			break
+
+			case 0x0402:
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private List parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-    
-    Map resultMap = [:]
+
+	List result = []
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
+		result << getTemperatureResult(value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-  		resultMap = getAccelerationResult(descMap.value)
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+		result << getAccelerationResult(descMap.value)
 	}
-    else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-  		resultMap = parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return resultMap
+	return result
 }
 
 private Map parseCustomMessage(String description) {
@@ -217,43 +229,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
+		case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0021': // Open/Motion/Wet
+		case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0022': // Tamper Alarm
-        break
+		case '0x0022': // Tamper Alarm
+		break
 
-        case '0x0023': // Battery Alarm
-        break
+		case '0x0023': // Battery Alarm
+		break
 
-        case '0x0024': // Supervision Report
+		case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0025': // Restore Report
+		case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0026': // Trouble/Failure
-        break
+		case '0x0026': // Trouble/Failure
+		break
 
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+		case '0x0028': // Test Mode
+		break
+	}
+	return resultMap
 }
 
 def updated() {
@@ -262,19 +274,19 @@ def updated() {
 	if (garageSensor == "Yes") {
 		def descriptionText = "Updating device to garage sensor"
 		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
 		def descriptionText = "Updating device to open/close sensor"
 		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 }
@@ -288,146 +300,183 @@ def getTemperature(value) {
 		}
 	}
 
-	private Map getBatteryResult(rawValue) {
-		log.debug "Battery"
-        log.debug rawValue
-		def linkText = getLinkText(device)
+private Map getBatteryResult(rawValue) {
+	log.debug "Battery rawValue = ${rawValue}"
 
-		def result = [
+	def result = [
 		name: 'battery',
-        value: '--'
-		]
+		value: '--',
+		translatable: true
+	]
 
-		def volts = rawValue / 10
-		def descriptionText
-        
-        if (rawValue == 255) {}
-        else {
-		
-        if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	def volts = rawValue / 10
+
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
-			result.descriptionText = "${linkText} battery was ${result.value}%"
-		}}
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
-		return result
-	}
-
-	private Map getTemperatureResult(value) {
-		log.debug "Temperature"
-		def linkText = getLinkText(device)
-		if (tempOffset) {
-			def offset = tempOffset as int
-			def v = value as int
-			value = v + offset
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				result.value = Math.min(100, (int) pct * 100)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
 		}
-		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-		return [
-		name: 'temperature',
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug "Temperature"
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
+
+	return [
+	name: 'temperature',
+	value: value,
+	descriptionText: descriptionText,
+    translatable: true
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug "Contact: ${device.displayName} value = ${value}"
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration"
+	def name = "acceleration"
+    def value
+    def descriptionText
+
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
+	]
+}
+
+def refresh() {
+	log.debug "Refreshing Values "
+
+	def refreshCmds = []
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		log.debug "Refreshing Values for manufacturer: SmartThings "
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
+	} else {
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
 		]
 	}
 
-	private Map getContactResult(value) {
-		log.debug "Contact"
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-		sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
-		sendEvent(name: 'status', value: value, descriptionText: descriptionText)
-	}
-
-	private getAccelerationResult(numValue) {
-		log.debug "Acceleration"
-        def name = "acceleration"
-		def value = numValue.endsWith("1") ? "active" : "inactive"
-		def linkText = getLinkText(device)
-		def descriptionText = "$linkText was $value"
-		def isStateChange = isStateChange(device, name, value)
-		[
-			name: name,
-			value: value,
-			descriptionText: descriptionText,
-			isStateChange: isStateChange
-		]
-	}
-
-	def refresh() {
-		log.debug "Refreshing Values "
-		def refreshCmds = [
-        
-        /* sensitivity - default value (8) */
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
+	//Common refresh commands
+	refreshCmds = refreshCmds + [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0010",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0012",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0013",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0014",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
-		]
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
-		return refreshCmds + enrollResponse()
-	}
+	return refreshCmds + enrollResponse()
+}
 
-	def configure() {
+def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-		String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-		log.debug "Configuring Reporting"
-		
-		def configCmds = [
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting"
 
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code 0x104E", 
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-
 		]
-   
-   return configCmds + refresh()
+
+	return configCmds + refresh()
 }
 
 private getEndpointId() {
@@ -442,44 +491,43 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
-
 private Map parseAxis(String description) {
-	log.debug "parseAxis"
-	def xyzResults = [x: 0, y: 0, z: 0]
-    def parts = description.split("2900")
-    parts[0] = "12" + parts[0]
-    parts.each { part ->
-    	part = part.trim()
-        if (part.startsWith("12")) {
-    		def unsignedX = hexToInt(part.split("12")[1].trim())
-			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
-			xyzResults.x = signedX
-            log.debug "X Part: ${signedX}"
-        }
-        else if (part.startsWith("13")) {
-			def unsignedY = hexToInt(part.split("13")[1].trim())
-			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
-			xyzResults.y = signedY
-            log.debug "Y Part: ${signedY}"
-        }
-        else if (part.startsWith("14")) {
-			def unsignedZ = hexToInt(part.split("14")[1].trim())
-			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
-			xyzResults.z = signedZ
-            log.debug "Z Part: ${signedZ}"
-			if (garageSensor == "Yes")
-				garageEvent(signedZ)
-        }
-    }
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
+	} else {
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
+		// This may change in the future
+		xyzResults.x = z
+		xyzResults.y = x
+		xyzResults.z = y
+	}
+
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		garageEvent(xyzResults.z)
 
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -493,10 +541,9 @@ def garageEvent(zValue) {
 		garageValue = 'garage-open'
 	}
 	if (contactValue != null){
-		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
 	}
 }
 
@@ -519,6 +566,14 @@ private Map getXyzResult(results, description) {
 	]
 }
 
+private getManufacturerCode() {
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		return "0x110A"
+	} else {
+		return "0x104E"
+	}
+}
+
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
@@ -544,4 +599,3 @@ private byte[] reverseArray(byte[] array) {
 	}
 	return array
 }
-

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -22,6 +22,8 @@ metadata {
 		capability "Battery"
 
 		fingerprint profileId: "FC01", deviceId: "0139"
+
+		attribute "status", "string"
 	}
 
 	simulator {
@@ -72,15 +74,12 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 
@@ -102,7 +101,7 @@ def parse(String description) {
 
 }
 
-private Map parseSingleMessage(description) {
+private List parseSingleMessage(description) {
 
 	def name = parseName(description)
 	def value = parseValue(description)
@@ -111,8 +110,9 @@ private Map parseSingleMessage(description) {
 	def handlerName = value == 'open' ? 'opened' : value
 	def isStateChange = isStateChange(device, name, value)
 
-	def results = [
-		name: name,
+	def results = []
+	results << createEvent(
+		name: "contact",
 		value: value,
 		unit: null,
 		linkText: linkText,
@@ -120,8 +120,18 @@ private Map parseSingleMessage(description) {
 		handlerName: handlerName,
 		isStateChange: isStateChange,
 		displayed: displayed(description, isStateChange)
-	]
-	log.debug "Parse results for $device: $results"
+	)
+
+	results << createEvent(
+		name: "status",
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	)
 
 	results
 }
@@ -193,7 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			results << getContactResult(part, description)
+			results.addAll(getContactResult(part, description))
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -272,7 +282,7 @@ private List parseRssiLqiMessage(String description) {
 	results
 }
 
-private getContactResult(part, description) {
+private List getContactResult(part, description) {
 	def name = "contact"
 	def value = part.endsWith("1") ? "open" : "closed"
 	def handlerName = value == 'open' ? 'opened' : value
@@ -280,19 +290,33 @@ private getContactResult(part, description) {
 	def descriptionText = "$linkText was $handlerName"
 	def isStateChange = isStateChange(device, name, value)
 
-	[
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
+	def results = []
+	results << createEvent(
+			name: "contact",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed:false
+	)
+
+	results << createEvent(
+			name: "status",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed: displayed(description, isStateChange)
+	)
+
+	results
 }
 
-private getAccelerationResult(part, description) {
+private Map getAccelerationResult(part, description) {
 	def name = "acceleration"
 	def value = part.endsWith("1") ? "active" : "inactive"
 	def linkText = getLinkText(device)
@@ -311,7 +335,7 @@ private getAccelerationResult(part, description) {
 	]
 }
 
-private getTempResult(part, description) {
+private Map getTempResult(part, description) {
 	def name = "temperature"
 	def temperatureScale = getTemperatureScale()
 	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
@@ -336,7 +360,7 @@ private getTempResult(part, description) {
 	]
 }
 
-private getXyzResult(results, description) {
+private Map getXyzResult(results, description) {
 	def name = "threeAxis"
 	def value = "${results.x},${results.y},${results.z}"
 	def linkText = getLinkText(device)
@@ -355,7 +379,7 @@ private getXyzResult(results, description) {
 	]
 }
 
-private getBatteryResult(part, description) {
+private Map getBatteryResult(part, description) {
 	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
 	def name = "battery"
 	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
@@ -376,7 +400,7 @@ private getBatteryResult(part, description) {
 	]
 }
 
-private getRssiResult(part, description, lastHop=false) {
+private Map getRssiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopRssi" : "rssi"
 	def valueString = part.split(":")[1].trim()
 	def value = (Integer.parseInt(valueString) - 128).toString()
@@ -407,7 +431,7 @@ private getRssiResult(part, description, lastHop=false) {
  * Note: To make the signal strength indicator more accurate, we could combine
  * LQI with RSSI.
  */
-private getLqiResult(part, description, lastHop=false) {
+private Map getLqiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopLqi" : "lqi"
 	def valueString = part.split(":")[1].trim()
 	def percentageOf = 255
@@ -452,6 +476,7 @@ private Boolean isOrientationMessage(String description) {
 	description ==~ /x:.*y:.*z:.*rssi:.*lqi:.*/
 }
 
+//Note: Not using this method anymore
 private String parseName(String description) {
 	if (isSupportedDescription(description)) {
 		return "contact"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -13,18 +13,19 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
  		capability "Battery"
  		capability "Configuration"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
- 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
+		capability "Health Check"
+
+		command "enrollResponse"
  	}
 
  	simulator {
@@ -225,7 +226,8 @@ def getTemperature(value) {
 
 		def volts = rawValue / 10
 		def descriptionText
-		if (volts > 3.5) {
+        if (rawValue == 0 || rawValue == 255) {}
+		else if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {
@@ -298,6 +300,7 @@ def getTemperature(value) {
 	}
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,17 +16,18 @@
  
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
         
-        command "enrollResponse"
+		command "enrollResponse"
  
  
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
  
 	simulator {
@@ -219,7 +220,8 @@ private Map getBatteryResult(rawValue) {
     
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,12 +14,13 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -196,7 +197,8 @@ private Map getBatteryResult(rawValue) {
 
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {
@@ -250,6 +252,7 @@ def refresh()
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2014 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
+		capability "Relative Humidity Measurement"
 
 		command "tempUp"
 		command "tempDown"
@@ -22,11 +23,41 @@ metadata {
 		command "heatDown"
 		command "coolUp"
 		command "coolDown"
-        command "setTemperature", ["number"]
+		command "setTemperature", ["number"]
 	}
 
-	tiles {
-		valueTile("temperature", "device.temperature", width: 1, height: 1) {
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ea5462")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -39,51 +70,51 @@ metadata {
 				]
 			)
 		}
-		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"tempDown"
 		}
-		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"tempUp"
 		}
 
-		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
-		standardTile("heatDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"heatDown"
 		}
-		standardTile("heatUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"heatUp"
 		}
 
-		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
-		standardTile("coolDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"coolDown"
 		}
-		standardTile("coolUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"coolUp"
 		}
 
-		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
 			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
 			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
 			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
 			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
 			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
 		}
-		standardTile("operatingState", "device.thermostatOperatingState") {
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
 			state "idle", label:'${name}', backgroundColor:"#ffffff"
 			state "heating", label:'${name}', backgroundColor:"#ffa81e"
 			state "cooling", label:'${name}', backgroundColor:"#269bd2"
 		}
 
-		main("temperature","operatingState")
+		main("thermostatMulti")
 		details([
 			"temperature","tempDown","tempUp",
 			"mode", "fanMode", "operatingState",
@@ -101,6 +132,7 @@ def installed() {
 	sendEvent(name: "thermostatMode", value: "off")
 	sendEvent(name: "thermostatFanMode", value: "fanAuto")
 	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/README.md

@@ -0,0 +1,42 @@
+# Device Tiles Examples and Reference
+
+This package contains examples of Device tiles, organized by tile type.
+
+## Purpose
+
+Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
+
+The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
+
+## Installation
+
+1. Self-publish the Device Handlers in this package.
+2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
+3. Install the SmartApp from the Marketplace, under "My Apps".
+4. Select the simulated devices you want to install and press "Done".
+
+The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
+You may wish to create a new room for these simulated devices for easy access.
+
+## Usage
+
+Each simulated device can be interacted with like other devices.
+You can use the mobile app to interact with the tiles to see how they look and behave.
+
+## Troubleshooting
+
+If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
+Also check live logging to see if there is a specific tile that is causing installation issues.
+
+## FAQ
+
+*Question: A tile isn't behaving as expected. What should I do?*
+
+QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
+
+Developers may file a support ticket, and reference the specific tile and issue observed.
+
+*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
+
+We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
+That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.

devicetypes/smartthings/tile-ux/tile-basic-carousel.src/tile-basic-carousel.groovy

@@ -0,0 +1,225 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "carouselDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("default", action: "setTemperature")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		main("thermostatMulti")
+		details([
+			"thermostatMulti"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -0,0 +1,59 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "colorWheelDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Color Control"
+	}
+
+	tiles(scale: 2) {
+		valueTile("currentColor", "device.color") {
+			state "color", label: '${currentValue}', defaultState: true
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
+			state "color", action: "color control.setColor"
+		}
+
+		main("currentColor")
+		details([
+			"rgbSelector"
+		])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def setColor(value) {
+	log.debug "setting color: $value"
+    if (value.hex) { sendEvent(name: "color", value: value.hex) }
+    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
+    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
+}
+
+def setSaturation(percent) {
+	log.debug "Executing 'setSaturation'"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "Executing 'setHue'"
+	sendEvent(name: "hue", value: percent)
+}

devicetypes/smartthings/tile-ux/tile-basic-presence.src/tile-basic-presence.groovy

@@ -0,0 +1,63 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "presenceDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Presence Sensor"
+
+		command "arrived"
+		command "departed"
+	}
+
+	tiles(scale: 2) {
+		// You only get a presence tile view when the size is 3x3 otherwise it's a value tile
+		standardTile("presence", "device.presence", width: 3, height: 3, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
+		}
+
+		standardTile("notPresentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("not present", label:'not present', backgroundColor:"#ffffff", action:"departed")
+		}
+
+		standardTile("presentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("present", label:'present', backgroundColor:"#53a7c0", action:"arrived")
+		}
+
+		main("presence")
+		details([
+			"presence", "presenceControl", "notPresentBtn", "presentBtn"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "present")
+}
+
+def parse(String description) {
+}
+
+def arrived() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "present")
+}
+
+def departed() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "not present")
+}

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -0,0 +1,75 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "sliderDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		command "setRangedLevel", ["number"]
+	}
+
+	tiles(scale: 2) {
+		controlTile("tinySlider", "device.level", "slider", height: 2, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("mediumSlider", "device.level", "slider", height: 2, width: 4, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("largeSlider", "device.level", "slider", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("rangeSlider", "device.rangedLevel", "slider", height: 2, width: 4, range: "(20..80)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
+			state "range", label:'${currentValue}', defaultState: true
+		}
+
+		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		main("rangeValue")
+		details([
+			"tinySlider", "mediumSlider",
+			"largeSlider",
+			"rangeSlider", "rangeValue",
+			"rangeSliderConstrained"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "level", value: 63)
+	sendEvent(name: "rangedLevel", value: 47)
+}
+
+def parse(String description) {
+}
+
+def setLevel(value) {
+	log.debug "setting level to $value"
+	sendEvent(name:"level", value:value)
+}
+
+def setRangedLevel(value) {
+	log.debug "setting ranged level to $value"
+	sendEvent(name:"rangedLevel", value:value)
+}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -0,0 +1,121 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "standardDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch"
+	}
+
+	tiles(scale: 2) {
+		// standard tile with actions
+		standardTile("actionRings", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with actions
+		standardTile("actionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true, decoration: "flat") {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile without actions
+		standardTile("noActionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}',icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with only a label
+		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
+		}
+
+		// standard flat tile with icon and label
+		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
+		}
+
+		// standard flat tile with only icon (Refreh text is IN the icon file)
+		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+		}
+
+		// standard with defaultState = true
+		standardTile("flatDefaultState", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "on", label: 'Pass!', icon: "st.switches.switch.on", defaultState: true
+		}
+
+		// standard with implicit defaultState based on order (0 index is selected)
+		standardTile("flatImplicitDefaultState1", "null", width: 2, height: 2, decoration: "flat") {
+			state "on", label: 'Pass!', icon: "st.switches.switch.on"
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+		}
+
+		// standard with implicit defaultState based on state.name == default
+		standardTile("flatImplicitDefaultState2", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "default", label: 'Pass!', icon: "st.switches.switch.on"
+		}
+
+		// utility tiles to fill the spaces
+		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
+			state "emptySmall", label:'', defaultState: true
+		}
+		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
+			state "emptyBigger", label:'', defaultState: true
+		}
+
+		// multi-line text (explicit newlines)
+		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
+			state "multiLine", label: '${currentValue}', defaultState: true
+		}
+
+		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
+			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+		}
+
+		main("actionRings")
+		details([
+			"actionRings", "actionFlat", "noActionFlat",
+
+			"flatLabel", "flatIconLabel", "flatIcon",
+
+			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+
+			"multiLine", "multiLineWithIcon"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "switch", value: "off")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
+}
+
+def parse(String description) {
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+}

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -0,0 +1,106 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "valueDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Sensor"
+	}
+
+	tiles(scale: 2) {
+		valueTile("text", "device.text", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("longText", "device.longText", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("integer", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("pi", "device.pi", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("bgColor", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
+		}
+
+		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#ff0000"],
+				[value: 90, color: "#0000ff"]
+			]
+		}
+
+		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#333333"]
+			]
+		}
+
+		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
+			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#990000"],
+				[value: 10, color: "#000099"]
+			]
+		}
+
+		valueTile("noValue", "device.nada", width: 4, height: 2) {
+			state "noval", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+		}
+
+		main("text")
+		details([
+			"text", "longText", "integer",
+            "integerFloat", "pi", "floatAsText",
+            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
+            "bgColorRangeConflict", "noValue",
+            "multiLine", "multiLineWithIcon"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "text", value: "Test")
+	sendEvent(name: "longText", value: "The Longer The Text, The Better The Test")
+	sendEvent(name: "integer", value: 47)
+	sendEvent(name: "integerFloat", value: 47.0)
+	sendEvent(name: "pi", value: 3.14159)
+	sendEvent(name: "floatAsText", value: "3.14159")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
+}
+
+def parse(String description) {
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -0,0 +1,151 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "genericDeviceTile", namespace: "smartthings/tile-ux", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Switch Level"
+
+		command "levelUp"
+		command "levelDown"
+		command "randomizeLevel"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"basicTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		multiAttributeTile(name:"sliderTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
+			}
+			tileAttribute("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
+				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
+					[value: 0, color: "#ff0000"],
+					[value: 20, color: "#ffff00"],
+					[value: 40, color: "#00ff00"],
+					[value: 60, color: "#00ffff"],
+					[value: 80, color: "#0000ff"],
+					[value: 100, color: "#ff00ff"]
+				]
+			}
+			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "VALUE_CONTROL") {
+				attributeState "VALUE_UP", action: "levelUp"
+				attributeState "VALUE_DOWN", action: "levelDown"
+			}
+		}
+		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
+
+		main(["basicTile"])
+		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
+	}
+}
+
+def installed() {
+	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
+	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
+}
+
+def parse(String description) {
+	// This is a simulated device. No incoming data to parse.
+}
+
+def on() {
+	log.debug "turningOn"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "turningOff"
+	sendEvent(name: "switch", value: "off")
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+}
+
+def randomizeLevel() {
+	def level = Math.round(Math.random() * 100)
+	setLevel(level)
+}
+
+def levelUp() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level < 100) {
+		level = level + 1
+	}
+	setLevel(level)
+}
+
+def levelDown() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level > 0) {
+		level = level - 1
+	}
+	setLevel(level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -0,0 +1,208 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "lightingDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Power Meter"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+		command "reset"
+		command "refresh"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'Power level: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoPower", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSlider", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The power level is currently: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSliderOrColor", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The light is currently consuming this amount of power: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+		}
+
+		valueTile("color", "device.color", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "color", label: '${currentValue}'
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+		}
+
+		main(["switch"])
+		details(["switch", "switchNoPower", "switchNoSlider", "switchNoSliderOrColor", "color", "refresh", "reset"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+def on() {
+	//log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	//log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+def nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+	def power = Math.round(percent / 1.175) * 0.1
+	sendEvent(name: "power", value: power)
+}
+
+def setSaturation(percent) {
+	log.debug "setSaturation: ${percent}, $this"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "setHue: ${percent}, $this"
+	sendEvent(name: "hue", value: percent)
+}
+
+def setColor(value) {
+	log.debug "setColor: ${value}, $this"
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+}
+
+def setAdjustedColor(value) {
+	if (value) {
+		log.trace "setAdjustedColor: ${value}"
+		def adjusted = value + [:]
+		adjusted.hue = adjustOutgoingHue(value.hue)
+		// Needed because color picker always sends 100
+		adjusted.level = null
+		setColor(adjusted)
+	}
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -0,0 +1,122 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "mediaPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Music Player"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState("paused", label:"Paused",)
+				attributeState("playing", label:"Playing")
+				attributeState("stopped", label:"Stopped")
+			}
+			tileAttribute("device.status", key: "MEDIA_STATUS") {
+				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
+				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
+				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
+			}
+			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
+				attributeState("status", action:"music Player.previousTrack", defaultState: true)
+			}
+			tileAttribute("device.status", key: "NEXT_TRACK") {
+				attributeState("status", action:"music Player.nextTrack", defaultState: true)
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState("level", action:"music Player.setLevel")
+			}
+			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
+				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
+				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
+			}
+			tileAttribute("device.trackDescription", key: "MARQUEE") {
+				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
+			}
+		}
+
+		main "mediaMulti"
+		details(["mediaMulti"])
+	}
+}
+
+def installed() {
+	state.tracks = [
+		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
+		"Careless Whisper\nWham!\nMake It Big",
+		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
+		"Shake It Off\nTaylor Swift\n1989",
+		"Ironic\nAlanis Morissette\nJagged Little Pill",
+		"Hotline Bling\nDrake\nHotline Bling - Single"
+	]
+	state.currentTrack = 0
+
+	sendEvent(name: "level", value: 72)
+	sendEvent(name: "mute", value: "unmuted")
+	sendEvent(name: "status", value: "stopped")
+}
+
+def parse(description) {
+	// No parsing will happen with this simulated device.
+}
+
+def play() {
+	sendEvent(name: "status", value: "playing")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def pause() {
+	sendEvent(name: "status", value: "paused")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def stop() {
+	sendEvent(name: "status", value: "stopped")
+}
+
+def previousTrack() {
+	state.currentTrack = state.currentTrack - 1
+	if (state.currentTrack < 0)
+		state.currentTrack = state.tracks.size()-1
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def nextTrack() {
+	state.currentTrack = state.currentTrack + 1
+	if (state.currentTrack == state.tracks.size())
+		state.currentTrack = 0
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def mute() {
+	sendEvent(name: "mute", value: "muted")
+}
+
+def unmute() {
+	sendEvent(name: "mute", value: "unmuted")
+}
+
+def setLevel(level) {
+	sendEvent(name: "level", value: level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -0,0 +1,343 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "thermostatDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+		}
+		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("temp", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+		}
+		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "tempDown", label:'down', action:"tempDown", defaultState: true
+		}
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "tempUp", label:'up', action:"tempUp", defaultState: true
+		}
+
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
+		}
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heatDown", label:'down', action:"heatDown", defaultState: true
+		}
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heatUp", label:'up', action:"heatUp", defaultState: true
+		}
+
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "coolDown", label:'down', action:"coolDown", defaultState: true
+		}
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "coolUp", label:'up', action:"coolUp", defaultState: true
+		}
+
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
+			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
+			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
+		}
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
+			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
+			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
+		}
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+			state "idle", label:'${name}', backgroundColor:"#ffffff"
+			state "heating", label:'${name}', backgroundColor:"#ffa81e"
+			state "cooling", label:'${name}', backgroundColor:"#269bd2"
+		}
+
+
+		main("thermostatFull")
+		details([
+			"thermostatFull", "thermostatNoHumidity", "thermostatBasic",
+			"temperature","tempDown","tempUp",
+			"mode", "fanMode", "operatingState",
+			"heatingSetpoint", "heatDown", "heatUp",
+			"coolingSetpoint", "coolDown", "coolUp"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+
+	if (mode == "off") {
+		idle = true
+	}
+
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def poll() {
+	null
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-videoplayer.src/tile-multiattribute-videoplayer.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "videoPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Configuration"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Refresh"
+		capability "Switch"
+
+		// custom commands
+		command "start"
+		command "stop"
+		command "setProfileHD"
+		command "setProfileSDH"
+		command "setProfileSDL"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "videoPlayer", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+
+			tileAttribute("device.profile", key: "STREAM_QUALITY") {
+				attributeState("1", label: "720p", action: "setProfileHD", defaultState: true)
+				attributeState("2", label: "h360p", action: "setProfileSDH", defaultState: true)
+				attributeState("3", label: "l360p", action: "setProfileSDL", defaultState: true)
+			}
+
+			tileAttribute("device.betaLogo", key: "BETA_LOGO") {
+				attributeState("betaLogo", label: "", value: "", defaultState: true)
+			}
+		}
+		
+		multiAttributeTile(name: "videoPlayerMin", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+		}
+
+		main("videoPlayer")
+		details([
+			"videoPlayer", "videoPlayerMin"
+		])
+	}
+}
+
+def installed() {
+}
+
+def parse(String description) {
+}
+
+def refresh() {
+	log.trace "refresh()"
+	// no-op
+}
+
+def on() {
+	log.trace "on()"
+	// no-op
+}
+
+def off() {
+	log.trace "off()"
+	// no-op
+}
+
+def setProfile(profile) {
+	log.trace "setProfile(): ${profile}"
+	sendEvent(name: "profile", value: profile, displayed: false)
+}
+
+def setProfileHD() {
+	setProfile(1)
+}
+
+def setProfileSDH() {
+	setProfile(2)
+}
+
+def setProfileSDL() {
+	setProfile(3)
+}
+
+def start() {
+	log.trace "start()"
+	def dataLiveVideo = [
+		OutHomeURL  : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		InHomeURL   : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		ThumbnailURL: "http://cdn.device-icons.smartthings.com/camera/dlink-indoor@2x.png",
+		cookie      : [key: "key", value: "value"]
+	]
+
+	def event = [
+		name           : "stream",
+		value          : groovy.json.JsonOutput.toJson(dataLiveVideo).toString(),
+		data		   : groovy.json.JsonOutput.toJson(dataLiveVideo),
+		descriptionText: "Starting the livestream",
+		eventType      : "VIDEO",
+		displayed      : false,
+		isStateChange  : true
+	]
+	sendEvent(event)
+}
+
+def stop() {
+	log.trace "stop()"
+}

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -29,18 +29,18 @@ metadata {
 
 	tiles {
 
-		valueTile("power", "device.power") {
+		valueTile("power", "device.power", canChangeIcon: true) {
 			state "power", label: '${currentValue} W'
 		}
 
-		tile(name: "powerChart", attribute: "powerContent", type: "HTML", url: '${currentValue}', width: 3, height: 2) { }
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "power"
-		details(["powerChart", "power", "refresh"])
+		details(["powerContent", "power", "refresh"])
 
 	}
 }
@@ -74,10 +74,10 @@ public addWattvisionData(json) {
 
 	log.trace "Adding data from Wattvision"
 
-	def data = json.data
+	def data = parseJson(json.data.toString())
 	def units = json.units ?: "watts"
 
-	if (data) {
+	if (data.size() > 0) {
 		def latestData = data[-1]
 		data.each {
 			sendPowerEvent(it.t, it.v, units, (latestData == it))
@@ -103,3 +103,7 @@ private sendPowerEvent(time, value, units, isLatest = false) {
 	sendEvent(eventData)
 
 }
+
+def parseJson(String s) {
+	new groovy.json.JsonSlurper().parseText(s)
+}

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -273,7 +273,7 @@ User-Agent: CyberGarage-HTTP/1.0
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -77,9 +77,8 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-    unschedule("setOffline")
+    	unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
-
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
@@ -134,7 +133,7 @@ def refresh() {
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -28,6 +28,7 @@
         command "subscribe"
         command "resubscribe"
         command "unsubscribe"
+        command "setOffline"
  }
 
  // simulator metadata
@@ -207,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -275,7 +276,7 @@ def setOffline() {
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -290,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -0,0 +1,194 @@
+/**
+ *  Iris Smart Fob
+ *
+ *  Copyright 2015 Mitch Pond
+ *	Presence code adapted from SmartThings Arrival Sensor HA device type
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+		capability "Battery"
+		capability "Button"
+        capability "Configuration"
+		capability "Presence Sensor"
+		capability "Sensor"
+        
+		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
+	}
+    
+    preferences{
+	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
+    		defaultValue: 3, displayDuringSetup: false)
+        input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        input "logging", "bool", title: "Enable debug logging",
+            defaultValue: false, displayDuringSetup: false
+    }
+
+	tiles(scale: 2) {
+    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
+            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+        }
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+        }
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["presence"])
+		details(["presence","button","battery"])
+	}
+}
+
+def parse(String description) {
+    def descMap = zigbee.parseDescriptionAsMap(description)
+    logIt descMap
+    state.lastCheckin = now()
+    logIt "lastCheckin = ${state.lastCheckin}"
+    handlePresenceEvent(true)
+    
+	def results = []
+    if (description?.startsWith('catchall:'))
+		results = parseCatchAllMessage(descMap)
+	else if (description?.startsWith('read attr -'))
+		results = parseReportAttributeMessage(descMap)
+    else logIt(descMap, "trace")
+        
+	return results;
+}
+
+def updated() {
+	startTimer()
+    configure()
+}
+
+def configure(){
+	logIt "Configuring Smart Fob..."
+	[
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
+    ] +
+    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
+}
+
+def parseCatchAllMessage(descMap) {
+    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
+    	handleButtonPress(descMap.sourceEndpoint as int)
+    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
+    	handleButtonRelease(descMap.sourceEndpoint as int)
+    else logIt("Parse: Unhandled message: ${descMap}","trace")
+}
+
+def parseReportAttributeMessage(descMap) {
+	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
+    else logIt descMap
+}
+
+private createBatteryEvent(percent) {
+	logIt "Battery level at " + percent
+	return createEvent([name: "battery", value: percent])
+}
+
+//this method determines if a press should count as a push or a hold and returns the relevant event type
+private handleButtonRelease(button) {
+	logIt "lastPress state variable: ${state.lastPress}"
+    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
+    
+    if (!state.lastPress) return sequenceError()
+	else if (state.lastPress.button != button) return sequenceError()
+    
+    def currentTime = now()
+    def startOfPress = state.lastPress?.time
+    def timeDif = currentTime - startOfPress
+    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
+    
+    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
+    
+    if (timeDif < 0) 
+    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
+    	return sequenceError()
+    else if (timeDif < holdTimeMillisec)
+    	return createButtonEvent(button,"pushed")
+    else 
+    	return createButtonEvent(button,"held")
+}
+
+private handleButtonPress(button) {
+	state.lastPress = [button: button, time: now()]
+}
+
+private createButtonEvent(button,action) {
+	logIt "Button ${button} ${action}"
+	return createEvent([
+    	name: "button",
+        value: action, 
+        data:[buttonNumber: button], 
+        descriptionText: "${device.displayName} button ${button} was ${action}",
+        isStateChange: true, 
+        displayed: true])
+}
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        logIt "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        logIt "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    logIt "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    logIt "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    logIt "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}
+
+// ****** Utility functions ******
+
+private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -44,7 +44,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"
@@ -56,21 +56,17 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else if (resultMap.type == "power") {
-            def powerValue
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.info event
+        if (event.name == "power") {
             if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(name: "power", value: powerValue)
+                event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(event)
             }
         }
         else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
+            sendEvent(event)
         }
     }
     else {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -39,7 +39,7 @@ metadata {
                 attributeState "level", action:"switch level.setLevel"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"
@@ -51,15 +51,9 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -22,10 +25,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-  
+
 Custom Commands:
   setAdjustedColor
-    
+
 */
 
 metadata {
@@ -41,7 +44,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata
@@ -63,7 +66,7 @@ metadata {
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -23,22 +23,14 @@
         capability "Battery"
         capability "Configuration"
 
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
     }
 
     tiles(scale: 2) {
@@ -60,7 +52,7 @@
 		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+		standardTile("refresh", "device.refresh", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -91,32 +83,19 @@ def uninstalled() {
 }
 
 def configure() {
-    /*
     def cmds =
-        zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
-                           "${TYPE_ENUM8}", 0, 3600, "{01}") +
-        zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
-                           "${TYPE_U8}", 600, 21600, "{01}")
-    */
-    def zigbeeId = device.zigbeeId
-    def cmds =
-        [
-            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
-            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
-            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
-
-            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
-            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
-            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
-        ]
+        zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
+                                  TYPE_ENUM8, 0, 3600, null) +
+        zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
+                                  TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
     return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {
     def cmds =
-        zigbee.refreshData("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}") +
-        zigbee.refreshData("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}")
+        zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +
+        zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
     log.info "refresh() --- cmds: $cmds"
     return cmds
 }
@@ -129,34 +108,27 @@ def parse(String description) {
         map = parseReportAttributeMessage(description)
     }
 
-    log.debug "parse() --- Parse returned $map"
     def result = map ? createEvent(map) : null
+    log.debug "parse() --- returned: $result"
     return result
 }
 
 // Lock capability commands
 def lock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_LOCK_DOOR)
     log.info "lock() -- cmds: $cmds"
-    //return cmds
-    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
+    return cmds
 }
 
 def unlock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_UNLOCK_DOOR)
     log.info "unlock() -- cmds: $cmds"
-    //return cmds
-    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
+    return cmds
 }
 
 // Private methods
 private Map parseReportAttributeMessage(String description) {
-    log.trace "parseReportAttributeMessage() --- description: $description"
-
     Map descMap = zigbee.parseDescriptionAsMap(description)
-
-    log.debug "parseReportAttributeMessage() --- descMap: $descMap"
-
     Map resultMap = [:]
     if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
         resultMap.name = "battery"
@@ -164,18 +136,24 @@ private Map parseReportAttributeMessage(String description) {
         if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
             resultMap.value = Integer.parseInt(descMap.value, 16)
         }
-        log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
     }
     else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {
         def value = Integer.parseInt(descMap.value, 16)
+        def linkText = getLinkText(device)
         resultMap.name = "lock"
-        resultMap.putAll([0:["value":"unknown",
-                             "descriptionText":"Not fully locked"],
-                          1:["value":"locked"],
-                          2:["value":"unlocked"]].get(value,
-                                                      ["value":"unknown",
-                                                       "descriptionText":"Unknown lock state"]))
-        log.info "parseReportAttributeMessage() --- lock: ${resultMap.value}"
+        if (value == 0) {
+            resultMap.value = "unknown"
+            resultMap.descriptionText = "${linkText} is not fully locked"
+        } else if (value == 1) {
+            resultMap.value = "locked"
+            resultMap.descriptionText = "${linkText} is locked"
+        } else if (value == 2) {
+            resultMap.value = "unlocked"
+            resultMap.descriptionText = "${linkText} is unlocked"
+        } else {
+            resultMap.value = "unknown"
+            resultMap.descriptionText = "${linkText} is in unknown lock state"
+        }
     }
     else {
         log.debug "parseReportAttributeMessage() --- ignoring attribute"

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -0,0 +1,144 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Author: SmartThings
+ *  Date: 2016-01-19
+ *
+ *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
+ */
+
+metadata {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Control"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
+    }
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        log.trace "zigbeeMap : $zigbeeMap"
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+        }
+    }
+}
+
+def on() {
+    zigbee.on()
+}
+
+def off() {
+    zigbee.off()
+}
+
+def refresh() {
+    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+    zigbee.setColorTemperature(value)
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value)
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+}

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -25,6 +25,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {
@@ -39,7 +40,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"
@@ -50,22 +51,15 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else if (resultMap.type == "power") {
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if (event.name == "power") {
             def powerValue
-            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(name: "power", value: powerValue)
-            }
+            powerValue = (event.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+            sendEvent(name: "power", value: powerValue)
         }
         else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
+            sendEvent(event)
         }
     }
     else {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -42,7 +42,7 @@ metadata {
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"
@@ -53,16 +53,9 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -54,7 +54,7 @@ metadata {
             }
         }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
@@ -73,16 +73,9 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-
-    def finalResult = zigbee.getKnownDescription(description)
-    if (finalResult) {
-        log.info finalResult
-        if (finalResult.type == "update") {
-            log.info "$device updates: ${finalResult.value}"
-        }
-        else {
-            sendEvent(name: finalResult.type, value: finalResult.value)
-        }
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -0,0 +1,102 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        sendEvent(resultMap)
+    }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def poll() {
+    refresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -0,0 +1,150 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Control"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
+    }
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        log.trace "zigbeeMap : $zigbeeMap"
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+        }
+    }
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def refresh() {
+    refreshAttributes() + configureAttributes()
+}
+
+def poll() {
+    refreshAttributes()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -25,7 +25,10 @@ metadata {
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -240,17 +243,25 @@ def batteryGetCommand() {
 def retypeBasedOnMSR() {
 	switch (state.MSR) {
 		case "0086-0002-002D":
-			log.debug("Changing device type to Z-Wave Water Sensor")
+			log.debug "Changing device type to Z-Wave Water Sensor"
 			setDeviceType("Z-Wave Water Sensor")
 			break
 		case "011F-0001-0001":  // Schlage motion
 		case "014A-0001-0001":  // Ecolink motion
+		case "014A-0004-0001":  // Ecolink motion +
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug("Changing device type to Z-Wave Motion Sensor")
+			log.debug "Changing device type to Z-Wave Motion Sensor"
 			setDeviceType("Z-Wave Motion Sensor")
 			break
-		
+		case "013C-0002-000D":  // Philio multi +
+			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
+			setDeviceType("3-in-1 Multisensor Plus (SG)")
+			break
+		case "0109-2001-0106":  // Vision door/window
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
+			setDeviceType("Door / Window Sensor Plus (SG)")
+			break
 	}
 }

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -66,9 +66,20 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def updated() {
+	try {
+		if (!state.init) {
+			state.init = true
+			response(secureSequence([zwave.doorLockV1.doorLockOperationGet(), zwave.batteryV1.batteryGet()]))
+		}
+	} catch (e) {
+		log.warn "updated() threw $e"
+	}
+}
+
 def parse(String description) {
 	def result = null
-	if (description.startsWith("Err")) {
+	if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -80,6 +91,8 @@ def parse(String description) {
 				displayed: true,
 			)
 		}
+	} else if (description == "updated") {
+		return null
 	} else {
 		def cmd = zwave.parse(description, [ 0x98: 1, 0x72: 2, 0x85: 2, 0x86: 1 ])
 		if (cmd) {
@@ -262,6 +275,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 		case 32:
 			map = [ name: "codeChanged", value: "all", descriptionText: "$device.displayName: all user codes deleted", isStateChange: true ]
 			allCodesDeleted()
+			break
 		case 33:
 			map = [ name: "codeReport", value: cmd.alarmLevel, data: [ code: "" ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.alarmLevel was deleted"
@@ -286,7 +300,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 			}
 			break
 		case 167:
-			if (!state.lastbatt || (new Date().time) - state.lastbatt > 12*60*60*1000) {
+			if (!state.lastbatt || now() - state.lastbatt > 12*60*60*1000) {
 				map = [ descriptionText: "$device.displayName: battery low", isStateChange: true ]
 				result << response(secure(zwave.batteryV1.batteryGet()))
 			} else {
@@ -328,14 +342,14 @@ def zwaveEvent(UserCodeReport cmd) {
 			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
-			map.isStateChange = (code != decrypt(state[name]))
+			map.isStateChange = true
 		}
 		result << createEvent(map)
 	} else {
 		map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: "" ] ]
 		if (state.blankcodes && state["reset$name"]) {  // we deleted this code so we can tell that our new code gets set
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier was reset"
-			map.displayed = map.isStateChange = false
+			map.displayed = map.isStateChange = true
 			result << createEvent(map)
 			state["set$name"] = state["reset$name"]
 			result << response(setCode(cmd.userIdentifier, state["reset$name"]))
@@ -347,7 +361,7 @@ def zwaveEvent(UserCodeReport cmd) {
 				map.descriptionText = "$device.displayName code $cmd.userIdentifier is not set"
 			}
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
-			map.isStateChange = state[name] as Boolean
+			map.isStateChange = true
 			result << createEvent(map)
 		}
 		code = ""
@@ -431,7 +445,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	} else {
 		map.value = cmd.batteryLevel
 	}
-	state.lastbatt = new Date().time
+	state.lastbatt = now()
 	createEvent(map)
 }
 
@@ -499,15 +513,14 @@ def refresh() {
 		cmds << "delay 4200"
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()  // old Schlage locks use group 2 and don't secure the Association CC
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
-	} else if (new Date().time - state.associationQuery.toLong() > 9000) {
-		log.debug "setting association"
+		state.associationQuery = now()
+	} else if (secondsPast(state.associationQuery, 9)) {
 		cmds << "delay 6000"
 		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
 		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
+		state.associationQuery = now()
 	}
 	log.debug "refresh sending ${cmds.inspect()}"
 	cmds
@@ -515,55 +528,22 @@ def refresh() {
 
 def poll() {
 	def cmds = []
-	if (state.assoc != zwaveHubNodeId && secondsPast(state.associationQuery, 19 * 60)) {
-		log.debug "setting association"
-		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
-		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
-		cmds << "delay 6000"
-		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		cmds << "delay 6000"
-		state.associationQuery = new Date().time
-	} else {
-		// Only check lock state if it changed recently or we haven't had an update in an hour
-		def latest = device.currentState("lock")?.date?.time
-		if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
-			cmds << secure(zwave.doorLockV1.doorLockOperationGet())
-			state.lastPoll = (new Date()).time
-		} else if (!state.MSR) {
-			cmds << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-		} else if (!state.fw) {
-			cmds << zwave.versionV1.versionGet().format()
-		} else if (!state.codes) {
-			state.pollCode = 1
-			cmds << secure(zwave.userCodeV1.usersNumberGet())
-		} else if (state.pollCode && state.pollCode <= state.codes) {
-			cmds << requestCode(state.pollCode)
-		} else if (!state.lastbatt || (new Date().time) - state.lastbatt > 53*60*60*1000) {
-			cmds << secure(zwave.batteryV1.batteryGet())
-		} else if (!state.enc) {
-			encryptCodes()
-			state.enc = 1
-		}
+	// Only check lock state if it changed recently or we haven't had an update in an hour
+	def latest = device.currentState("lock")?.date?.time
+	if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
+		cmds << secure(zwave.doorLockV1.doorLockOperationGet())
+		state.lastPoll = now()
+	} else if (!state.lastbatt || now() - state.lastbatt > 53*60*60*1000) {
+		cmds << secure(zwave.batteryV1.batteryGet())
+		state.lastbatt = now()  //inside-214
 	}
-	log.debug "poll is sending ${cmds.inspect()}"
-	device.activity()
-	cmds ?: null
-}
-
-private def encryptCodes() {
-	def keys = new ArrayList(state.keySet().findAll { it.startsWith("code") })
-	keys.each { key ->
-		def match = (key =~ /^code(\d+)$/)
-		if (match) try {
-			def keynum = match[0][1].toInteger()
-			if (keynum > 30 && !state[key]) {
-				state.remove(key)
-			} else if (state[key] && !state[key].startsWith("~")) {
-				log.debug "encrypting $key: ${state[key].inspect()}"
-				state[key] = encrypt(state[key])
-			}
-		} catch (java.lang.NumberFormatException e) { }
+	if (cmds) {
+		log.debug "poll is sending ${cmds.inspect()}"
+		cmds
+	} else {
+		// workaround to keep polling from stopping due to lack of activity
+		sendEvent(descriptionText: "skipping poll", isStateChange: true, displayed: false)
+		null
 	}
 }
 
@@ -672,7 +652,7 @@ private Boolean secondsPast(timestamp, seconds) {
 			return true
 		}
 	}
-	return (new Date().time - timestamp) > (seconds * 1000)
+	return (now() - timestamp) > (seconds * 1000)
 }
 
 private allCodesDeleted() {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -57,7 +57,7 @@ def parse(String description) {
 	return result
 }
 
-def sensorValueEvent(Short value) {
+def sensorValueEvent(value) {
 	if (value) {
 		createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
 	} else {
@@ -94,24 +94,24 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 {
 	def result = []
 	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice ensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02 || cmd.event == 0x07 || cmd.event == 0x08) {
 			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			result << sensorValueEvent(0)
 		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.batteryV1.batteryGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-			result << sensorValueEvent(1)
 		}
 	} else if (cmd.notificationType) {
 		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, isStateChange: true, displayed: false)
 	} else {
 		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
 	}
 	result
 }
@@ -119,6 +119,10 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
+
+	if (state.MSR == "011A-0601-0901" && device.currentState('motion') == null) {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
+		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
 		result << response("delay 1200")
@@ -179,4 +183,4 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
-}
+}

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -115,6 +115,10 @@ def strobe() {
 	]
 }
 
+def both() {
+	on()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -61,37 +61,44 @@ def parse(String description) {
 			zwaveEvent(cmd, results)
 		}
 	}
-	// log.debug "\"$description\" parsed to ${results.inspect()}"
+	log.debug "'$description' parsed to ${results.inspect()}"
 	return results
 }
 
 
 def createSmokeOrCOEvents(name, results) {
 	def text = null
-	if (name == "smoke") {
-		text = "$device.displayName smoke was detected!"
-		// these are displayed:false because the composite event is the one we want to see in the app
-		results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
-	} else if (name == "carbonMonoxide") {
-		text = "$device.displayName carbon monoxide was detected!"
-		results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
-	} else if (name == "tested") {
-		text = "$device.displayName was tested"
-		results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
-		results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
-	} else if (name == "smokeClear") {
-		text = "$device.displayName smoke is clear"
-		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-		name = "clear"
-	} else if (name == "carbonMonoxideClear") {
-		text = "$device.displayName carbon monoxide is clear"
-		results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
-		name = "clear"
-	} else if (name == "testClear") {
-		text = "$device.displayName smoke is clear"
-		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-		results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-		name = "clear"
+	switch (name) {
+		case "smoke":
+			text = "$device.displayName smoke was detected!"
+			// these are displayed:false because the composite event is the one we want to see in the app
+			results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
+			break
+		case "carbonMonoxide":
+			text = "$device.displayName carbon monoxide was detected!"
+			results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
+			break
+		case "tested":
+			text = "$device.displayName was tested"
+			results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
+			results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
+			break
+		case "smokeClear":
+			text = "$device.displayName smoke is clear"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+			name = "clear"
+			break
+		case "carbonMonoxideClear":
+			text = "$device.displayName carbon monoxide is clear"
+			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
+			name = "clear"
+			break
+		case "testClear":
+			text = "$device.displayName test cleared"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
+			name = "clear"
+			break
 	}
 	// This composite event is used for updating the tile
 	results << createEvent(name: "alarmState", value: name, descriptionText: text)
@@ -117,8 +124,10 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			createSmokeOrCOEvents(cmd.alarmLevel ? "tested" : "testClear", results)
 			break
 		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
-			if (cmd.alarmLevel != 255) {
-				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", displayed: true)
+			if (cmd.alarmLevel == 255) {
+				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
+			} else {
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
 			}
 			
 			// Clear smoke in case they pulled batteries and we missed the clear msg
@@ -127,9 +136,8 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			}
 			
 			// Check battery if we don't have a recent battery event
-			def prevBattery = device.currentState("battery")
-			if (!prevBattery || (new Date().time - prevBattery.date.time)/60000 >= 60 * 53) {
-				results << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
+			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
+				results << response(zwave.batteryV1.batteryGet())
 			}
 			break
 		default:
@@ -158,12 +166,17 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd,
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
-	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
 	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
+	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
+		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
+	} else {
+		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
-	def map = [ name: "battery", unit: "%" ]
+	def map = [ name: "battery", unit: "%", isStateChange: true ]
+	state.lastbatt = now()
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
 		map.descriptionText = "$device.displayName battery is low!"

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -95,11 +95,17 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	if (state.manufacturer != cmd.manufacturerName) {
-		updateDataValue("manufacturer", cmd.manufacturerName)
-	}
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/timevalve-gaslock-t-08/timevalve-smart.src/timevalve-smart.groovy

@@ -0,0 +1,243 @@
+metadata {
+        definition (name: "Timevalve Smart", namespace: "timevalve.gaslock.t-08", author: "ruinnel") {
+                capability "Valve"
+                capability "Refresh"
+                capability "Battery"
+                capability "Temperature Measurement"
+                
+                command "setRemaining"
+                command "setTimeout"
+                command "setTimeout10"
+                command "setTimeout20"
+                command "setTimeout30"
+                command "setTimeout40"
+                
+                command "remainingLevel"
+                
+                attribute "remaining", "number"
+                attribute "remainingText", "String"
+                attribute "timeout", "number"
+                
+                //raw desc : 0 0 0x1006 0 0 0 7 0x5E 0x86 0x72 0x5A 0x73 0x98 0x80
+                //fingerprint deviceId:"0x1006", inClusters:"0x5E, 0x86, 0x72, 0x5A, 0x73, 0x98, 0x80"
+        }
+
+        tiles (scale: 2) {
+        	multiAttributeTile(name:"statusTile", type:"generic", width:6, height:4) {
+            	tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+	            	attributeState "open", label: '${name}', action: "close", icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'${name}', action: "", icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+                tileAttribute("device.remainingText", key: "SECONDARY_CONTROL") {
+	            	attributeState "open", label: '${currentValue}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+            }
+            
+            standardTile("refreshTile", "command.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+            }
+            
+            controlTile("remainingSliderTile", "device.remaining", "slider", inactiveLabel: false, range:"(0..590)", height: 2, width: 4) {
+            	state "level", action:"remainingLevel"
+            }
+            valueTile("setRemaining", "device.remainingText", inactiveLabel: false, decoration: "flat", height: 2, width: 2){
+                state "remainingText", label:'${currentValue}\nRemaining'//, action: "setRemaining"//, icon: "st.Office.office6"
+            }
+
+            standardTile("setTimeout10", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'10Min', action: "setTimeout10", icon:"st.Health & Wellness.health7", defaultState: true
+                state "10", label:'10Min', action: "setTimeout10", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout20", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'20Min', action: "setTimeout20", icon:"st.Health & Wellness.health7", defaultState: true
+                state "20", label:'20Min', action: "setTimeout20", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout30", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'30Min', action: "setTimeout30", icon:"st.Health & Wellness.health7", defaultState: true
+                state "30", label:'30Min', action: "setTimeout30", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout40", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'40Min', action: "setTimeout40", icon:"st.Health & Wellness.health7", defaultState: true
+                state "40", label:'40Min', action: "setTimeout40", icon:"st.Office.office13"
+            }
+
+            valueTile("batteryTile", "device.battery", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "battery", label:'${currentValue}% battery', unit:""
+            }
+
+            main (["statusTile"])
+//            details (["statusTile", "remainingSliderTile", "setRemaining", "setTimeout10", "setTimeout20", "batteryTile", "refreshTile", "setTimeout30", "setTimeout40"])
+//            details (["statusTile", "batteryTile", "setRemaining", "refreshTile"])
+            details (["statusTile", "batteryTile", "refreshTile"])
+        }
+}
+
+def parse(description) {
+//	log.debug "parse - " + description
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent(descriptionText: description, isStateChange: true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+		if (cmd) {
+        	log.debug "parsed cmd = " + cmd
+			result = zwaveEvent(cmd)
+			//log.debug("'$description' parsed to $result")
+		} else {
+			log.debug("Couldn't zwave.parse '$description'")
+		}
+	}
+	return result
+}
+
+// 복호화 후 zwaveEvent() 호출
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	//log.debug "SecurityMessageEncapsulation - " + cmd
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		state.sec = 1
+        log.debug "encapsulatedCommand = " + encapsulatedCommand
+        zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	//log.debug "switch status - " + cmd.value
+    createEvent(name:"contact", value: cmd.value ? "open" : "closed")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+    def map = [ name: "battery", unit: "%" ]
+    if (cmd.batteryLevel == 0xFF) {  // Special value for low battery alert
+        map.value = 1
+        map.descriptionText = "${device.displayName} has a low battery"
+        map.isStateChange = true
+    } else {
+        map.value = cmd.batteryLevel
+    }
+    
+    log.debug "battery - ${map.value}${map.unit}"
+    // Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = new Date().time
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+  //log.debug "zwaveEvent - ${device.displayName}: ${cmd}"
+  createEvent(descriptionText: "${device.displayName}: ${cmd}")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def result = []
+	log.info "zwave.configurationV1.configurationGet - " + cmd
+    def array = cmd.configurationValue
+    def value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    if (device.currentValue("contact") == "open") {
+    	value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    } else {
+    	value = 0
+    }
+    
+    if (device.currentValue('contact') == 'open') {
+    	def hour = value.intdiv(60);
+        def min = (value % 60).toString().padLeft(2, '0');
+        def text = "${hour}:${min}M"
+        
+        log.info "remain - " + text
+        result.add( createEvent(name: "remaining", value: value, displayed: false, isStateChange: true) )
+        result.add( createEvent(name: "remainingText", value: text, displayed: false, isStateChange: true) )
+    } else {
+    	result.add( createEvent(name: "timeout", value: value, displayed: false, isStateChange: true) )
+    }
+    return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def type = cmd.notificationType
+    if (type == cmd.NOTIFICATION_TYPE_HEAT) {
+    	log.info "NotificationReport - ${type}"
+        createEvent(name: "temperature", value: 999, unit: "C", descriptionText: "${device.displayName} is over heat!", displayed: true, isStateChange: true)
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	def type = cmd.alarmType
+    def level = cmd.alarmLevel
+    
+    log.info "AlarmReport - type : ${type}, level : ${level}"
+    def msg = "${device.displayName} is over heat!"
+    def result = createEvent(name: "temperature", value: 999, unit: "C", descriptionText: msg, displayed: true, isStateChange: true)
+    if (sendPushMessage) {
+    	sendPushMessage(msg)
+    }
+    return result
+}
+
+// remote open not allow
+def open() {}
+
+def close() {
+//	log.debug 'cmd - close()'
+    commands([
+        zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00),
+		zwave.switchBinaryV1.switchBinaryGet()
+	])
+}
+
+def setTimeout10() { setTimeout(10) }
+def setTimeout20() { setTimeout(20) }
+def setTimeout30() { setTimeout(30) }
+def setTimeout40() { setTimeout(40) }
+
+
+def setTimeout(value) {
+//	log.debug "setDefaultTime($value)"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 4, scaledConfigurationValue: value * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x01)
+    ]);
+}
+
+def remainingLevel(value) {
+//	log.debug "remainingLevel($value)"
+    def hour = value.intdiv(60);
+    def min = (value % 60).toString().padLeft(2, '0');
+    def text = "${hour}:${min}M"
+    sendEvent(name: "remaining", value: value, displayed: false, isStateChange: true)
+    sendEvent(name: "remainingText", value: text, displayed: false, isStateChange: true)
+}
+
+def setRemaining() {
+	def remaining = device.currentValue("remaining")
+//	log.debug "setConfiguration() - remaining : $remaining"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x03, size: 4, scaledConfigurationValue: remaining * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+    ]);
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec != 0 && !(cmd instanceof physicalgraph.zwave.commands.batteryv1.BatteryGet)) {
+    	log.debug "cmd = " + cmd + ", encapsulation"
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+    	log.debug "cmd = " + cmd + ", plain"
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def refresh() {
+//	log.debug 'cmd - refresh()'
+	commands([
+    			zwave.batteryV1.batteryGet(),
+                zwave.switchBinaryV1.switchBinaryGet(),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x01),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+        ], 400)
+}

gradle/wrapper/gradle-wrapper.properties

@@ -0,0 +1,6 @@
+#Thu Feb 25 08:56:06 CST 2016
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-2.10-bin.zip

gradlew

@@ -0,0 +1,160 @@
+#!/usr/bin/env bash
+
+##############################################################################
+##
+##  Gradle start up script for UN*X
+##
+##############################################################################
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS=""
+
+APP_NAME="Gradle"
+APP_BASE_NAME=`basename "$0"`
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD="maximum"
+
+warn ( ) {
+    echo "$*"
+}
+
+die ( ) {
+    echo
+    echo "$*"
+    echo
+    exit 1
+}
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+case "`uname`" in
+  CYGWIN* )
+    cygwin=true
+    ;;
+  Darwin* )
+    darwin=true
+    ;;
+  MINGW* )
+    msys=true
+    ;;
+esac
+
+# Attempt to set APP_HOME
+# Resolve links: $0 may be a link
+PRG="$0"
+# Need this for relative symlinks.
+while [ -h "$PRG" ] ; do
+    ls=`ls -ld "$PRG"`
+    link=`expr "$ls" : '.*-> \(.*\)$'`
+    if expr "$link" : '/.*' > /dev/null; then
+        PRG="$link"
+    else
+        PRG=`dirname "$PRG"`"/$link"
+    fi
+done
+SAVED="`pwd`"
+cd "`dirname \"$PRG\"`/" >/dev/null
+APP_HOME="`pwd -P`"
+cd "$SAVED" >/dev/null
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD="$JAVA_HOME/jre/sh/java"
+    else
+        JAVACMD="$JAVA_HOME/bin/java"
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD="java"
+    which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+fi
+
+# Increase the maximum file descriptors if we can.
+if [ "$cygwin" = "false" -a "$darwin" = "false" ] ; then
+    MAX_FD_LIMIT=`ulimit -H -n`
+    if [ $? -eq 0 ] ; then
+        if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ] ; then
+            MAX_FD="$MAX_FD_LIMIT"
+        fi
+        ulimit -n $MAX_FD
+        if [ $? -ne 0 ] ; then
+            warn "Could not set maximum file descriptor limit: $MAX_FD"
+        fi
+    else
+        warn "Could not query maximum file descriptor limit: $MAX_FD_LIMIT"
+    fi
+fi
+
+# For Darwin, add options to specify how the application appears in the dock
+if $darwin; then
+    GRADLE_OPTS="$GRADLE_OPTS \"-Xdock:name=$APP_NAME\" \"-Xdock:icon=$APP_HOME/media/gradle.icns\""
+fi
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin ; then
+    APP_HOME=`cygpath --path --mixed "$APP_HOME"`
+    CLASSPATH=`cygpath --path --mixed "$CLASSPATH"`
+    JAVACMD=`cygpath --unix "$JAVACMD"`
+
+    # We build the pattern for arguments to be converted via cygpath
+    ROOTDIRSRAW=`find -L / -maxdepth 1 -mindepth 1 -type d 2>/dev/null`
+    SEP=""
+    for dir in $ROOTDIRSRAW ; do
+        ROOTDIRS="$ROOTDIRS$SEP$dir"
+        SEP="|"
+    done
+    OURCYGPATTERN="(^($ROOTDIRS))"
+    # Add a user-defined pattern to the cygpath arguments
+    if [ "$GRADLE_CYGPATTERN" != "" ] ; then
+        OURCYGPATTERN="$OURCYGPATTERN|($GRADLE_CYGPATTERN)"
+    fi
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    i=0
+    for arg in "$@" ; do
+        CHECK=`echo "$arg"|egrep -c "$OURCYGPATTERN" -`
+        CHECK2=`echo "$arg"|egrep -c "^-"`                                 ### Determine if an option
+
+        if [ $CHECK -ne 0 ] && [ $CHECK2 -eq 0 ] ; then                    ### Added a condition
+            eval `echo args$i`=`cygpath --path --ignore --mixed "$arg"`
+        else
+            eval `echo args$i`="\"$arg\""
+        fi
+        i=$((i+1))
+    done
+    case $i in
+        (0) set -- ;;
+        (1) set -- "$args0" ;;
+        (2) set -- "$args0" "$args1" ;;
+        (3) set -- "$args0" "$args1" "$args2" ;;
+        (4) set -- "$args0" "$args1" "$args2" "$args3" ;;
+        (5) set -- "$args0" "$args1" "$args2" "$args3" "$args4" ;;
+        (6) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" ;;
+        (7) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" ;;
+        (8) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" ;;
+        (9) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" "$args8" ;;
+    esac
+fi
+
+# Split up the JVM_OPTS And GRADLE_OPTS values into an array, following the shell quoting and substitution rules
+function splitJvmOpts() {
+    JVM_OPTS=("$@")
+}
+eval splitJvmOpts $DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS
+JVM_OPTS[${#JVM_OPTS[*]}]="-Dorg.gradle.appname=$APP_BASE_NAME"
+
+exec "$JAVACMD" "${JVM_OPTS[@]}" -classpath "$CLASSPATH" org.gradle.wrapper.GradleWrapperMain "$@"

gradlew.bat

@@ -0,0 +1,90 @@
+@if "%DEBUG%" == "" @echo off
+@rem ##########################################################################
+@rem
+@rem  Gradle startup script for Windows
+@rem
+@rem ##########################################################################
+
+@rem Set local scope for the variables with windows NT shell
+if "%OS%"=="Windows_NT" setlocal
+
+@rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+set DEFAULT_JVM_OPTS=
+
+set DIRNAME=%~dp0
+if "%DIRNAME%" == "" set DIRNAME=.
+set APP_BASE_NAME=%~n0
+set APP_HOME=%DIRNAME%
+
+@rem Find java.exe
+if defined JAVA_HOME goto findJavaFromJavaHome
+
+set JAVA_EXE=java.exe
+%JAVA_EXE% -version >NUL 2>&1
+if "%ERRORLEVEL%" == "0" goto init
+
+echo.
+echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:findJavaFromJavaHome
+set JAVA_HOME=%JAVA_HOME:"=%
+set JAVA_EXE=%JAVA_HOME%/bin/java.exe
+
+if exist "%JAVA_EXE%" goto init
+
+echo.
+echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME%
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:init
+@rem Get command-line arguments, handling Windowz variants
+
+if not "%OS%" == "Windows_NT" goto win9xME_args
+if "%@eval[2+2]" == "4" goto 4NT_args
+
+:win9xME_args
+@rem Slurp the command line arguments.
+set CMD_LINE_ARGS=
+set _SKIP=2
+
+:win9xME_args_slurp
+if "x%~1" == "x" goto execute
+
+set CMD_LINE_ARGS=%*
+goto execute
+
+:4NT_args
+@rem Get arguments from the 4NT Shell from JP Software
+set CMD_LINE_ARGS=%$
+
+:execute
+@rem Setup the command line
+
+set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar
+
+@rem Execute Gradle
+"%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" org.gradle.wrapper.GradleWrapperMain %CMD_LINE_ARGS%
+
+:end
+@rem End local scope for the variables with windows NT shell
+if "%ERRORLEVEL%"=="0" goto mainEnd
+
+:fail
+rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of
+rem the _cmd.exe /c_ return code!
+if  not "" == "%GRADLE_EXIT_CONSOLE%" exit 1
+exit /b 1
+
+:mainEnd
+if "%OS%"=="Windows_NT" endlocal
+
+:omega

settings.gradle

@@ -0,0 +1,19 @@
+/*
+ * This settings file was auto generated by the Gradle buildInit task
+ * by 'jblaisdell' at '2/25/16 8:56 AM' with Gradle 2.10
+ *
+ * The settings file is used to specify which projects to include in your build.
+ * In a single project build this file can be empty or even removed.
+ *
+ * Detailed information about configuring a multi-project build in Gradle can be found
+ * in the user guide at https://docs.gradle.org/2.10/userguide/multi_project_builds.html
+ */
+
+/*
+// To declare projects as part of a multi-project build use the 'include' method
+include 'shared'
+include 'api'
+include 'services:webservice'
+*/
+
+rootProject.name = 'SmartThingsPublic'

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -0,0 +1,252 @@
+/**
+ *  Gidjit Hub
+ *
+ *  Copyright 2016 Matthew Page
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gidjit Hub",
+    namespace: "com.gidjit.smartthings.hub",
+    author: "Matthew Page",
+    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
+    category: "Convenience",
+    iconUrl: "http://www.gidjit.com/appicon.png",
+    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
+    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
+    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
+
+
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
+}
+mappings {
+  path("/structureinfo") {
+    action: [
+      GET: "structureInfo"
+    ]
+  }
+  path("/helloactions") {
+    action: [
+      GET: "helloActions"
+    ]
+  }
+  path("/helloactions/:label") {
+    action: [
+      PUT: "executeAction"
+    ]
+  }
+
+  path("/switch/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+
+  path("/thermostat/:id/:command") {
+    action: [
+      PUT: "updateThermostat"
+    ]
+  }
+
+  path("/windowshade/:id/:command") {
+    action: [
+      PUT: "updateWindowShade"
+    ]
+  }
+  path("/acquiredata/:id") {
+    action: [
+      GET: "acquiredata"
+    ]
+  }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// subscribe to attributes, devices, locations, etc.
+}
+def helloActions() {
+	def actions = location.helloHome?.getPhrases()*.label
+    if(!actions) {
+    	return []
+    }
+	return actions
+}
+def executeAction() {
+    def actions = location.helloHome?.getPhrases()*.label
+    def a = actions?.find() { it == params.label }
+    if (!a) {
+        httpError(400, "invalid label $params.label")
+        return
+    }
+    location.helloHome?.execute(params.label)
+}
+/*  this is the primary function called to query at the structure and its devices */
+def structureInfo() { //list all devices
+	def list = [:]
+    def currId = location.id
+    list[currId] = [:]
+    list[currId].name = location.name
+    list[currId].id = location.id
+    list[currId].temperatureScale = location.temperatureScale
+    list[currId].devices = [:]
+  
+    def setValues = {
+   		if (params.brief) {
+            return [id: it.id, name: it.displayName]
+        }
+        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
+            "$it.name"
+        }, suppAttributes: it.supportedAttributes.collect {
+            "$it.name"      
+        }, suppCommands: it.supportedCommands.collect {
+            "$it.name"      
+        }]
+
+        return newList
+    }
+    switches?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    thermostats?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    windowShades?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+
+    return list
+
+}
+/*  This function returns all of the current values of the specified Devices attributes */
+def acquiredata() {
+	def resp = [:]
+    if (!params.id) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
+    	thermostats.find() { it.id == params.id }    
+   
+    if (!dev) {
+    	httpError(400, "invalid id $params.id")
+        return    
+    }
+    def att = dev.supportedAttributes
+    att.each {
+    	resp[it.name] = dev.currentValue("$it.name")
+    }
+    return resp
+}
+
+void updateSwitch() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def sw = switches.find() { it.id == params.id }
+    if (!sw) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    switch(command) {
+        case "on":
+        	if ( sw.currentSwitch != "on" ) {
+            	sw.on()
+            }
+            break
+        case "off":
+        	if ( sw.currentSwitch != "off" ) {
+            	sw.off()
+            }
+            break
+        default:
+            httpError(400, "$command is not a valid")
+    }
+}
+
+
+void updateThermostat() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def therm = thermostats.find() { it.id == params.id }
+    if (!therm || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+        "off",
+        "heat",
+        "emergencyHeat",
+        "cool",
+        "fanOn",
+        "fanAuto",
+        "fanCirculate",
+        "auto"
+
+	]
+    def passNumParamComm = [
+    	"setHeatingSetpoint",
+    	"setCoolingSetpoint",   
+    ]
+    def passStringParamComm = [
+        "setThermostatMode",
+        "setThermostatFanMode",
+	]
+    if (command in passComm) {
+    	therm."$command"()	
+    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
+    	therm."$command"(Float.parseFloat(params.p1))	
+    } else if (command in passStringParamComm && params.p1) {
+    	therm."$command"(params.p1)	
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+
+void updateWindowShade() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def ws = windowShades.find() { it.id == params.id }
+    if (!ws || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+		"open",
+        "close",
+        "presetPosition",
+	]
+    if (command in passComm) {
+    	ws."$command"()		
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+// TODO: implement event handlers

smartapps/com-obycode/beaconthings-manager.src/beaconthings-manager.groovy

@@ -0,0 +1,147 @@
+/**
+ *  BeaconThing Manager
+ *
+ *  Copyright 2015 obycode
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "BeaconThings Manager",
+    namespace: "com.obycode",
+    author: "obycode",
+    description: "SmartApp to interact with the BeaconThings iOS app. Use this app to integrate iBeacons into your smart home.",
+    category: "Convenience",
+    iconUrl: "http://beaconthingsapp.com/images/Icon-60.png",
+    iconX2Url: "http://beaconthingsapp.com/images/Icon-60@2x.png",
+    iconX3Url: "http://beaconthingsapp.com/images/Icon-60@3x.png",
+    oauth: true)
+
+
+preferences {
+	section("Allow BeaconThings to talk to your home") {
+
+	}
+}
+
+def installed() {
+  log.debug "Installed with settings: ${settings}"
+
+  initialize()
+}
+
+def initialize() {
+}
+
+def uninstalled() {
+  removeChildDevices(getChildDevices())
+}
+
+mappings {
+  path("/beacons") {
+    action: [
+    DELETE: "clearBeacons",
+    POST:   "addBeacon"
+    ]
+  }
+
+  path("/beacons/:id") {
+    action: [
+    PUT: "updateBeacon",
+    DELETE: "deleteBeacon"
+    ]
+  }
+}
+
+void clearBeacons() {
+  removeChildDevices(getChildDevices())
+}
+
+void addBeacon() {
+  def beacon = request.JSON?.beacon
+  if (beacon) {
+    def beaconId = "BeaconThings"
+    if (beacon.major) {
+      beaconId = "$beaconId-${beacon.major}"
+      if (beacon.minor) {
+        beaconId = "$beaconId-${beacon.minor}"
+      }
+    }
+    log.debug "adding beacon $beaconId"
+    def d = addChildDevice("com.obycode", "BeaconThing", beaconId,  null, [label:beacon.name, name:"BeaconThing", completedSetup: true])
+    log.debug "addChildDevice returned $d"
+
+    if (beacon.present) {
+      d.arrive(beacon.present)
+    }
+    else if (beacon.presence) {
+      d.setPresence(beacon.presence)
+    }
+  }
+}
+
+void updateBeacon() {
+  log.debug "updating beacon ${params.id}"
+  def beaconDevice = getChildDevice(params.id)
+  // def children = getChildDevices()
+  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+  if (!beaconDevice) {
+    log.debug "Beacon not found directly"
+    def children = getChildDevices()
+    beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+    if (!beaconDevice) {
+      log.debug "Beacon not found in list either"
+      return
+    }
+  }
+
+  // This could be just updating the presence
+  def presence = request.JSON?.presence
+  if (presence) {
+    log.debug "Setting ${beaconDevice.label} to $presence"
+    beaconDevice.setPresence(presence)
+  }
+
+  // It could be someone arriving
+  def arrived = request.JSON?.arrived
+  if (arrived) {
+    log.debug "$arrived arrived at ${beaconDevice.label}"
+    beaconDevice.arrived(arrived)
+  }
+
+  // It could be someone left
+  def left = request.JSON?.left
+  if (left) {
+    log.debug "$left left ${beaconDevice.label}"
+    beaconDevice.left(left)
+  }
+
+  // or it could be updating the name
+  def beacon = request.JSON?.beacon
+  if (beacon) {
+    beaconDevice.label = beacon.name
+  }
+}
+
+void deleteBeacon() {
+  log.debug "deleting beacon ${params.id}"
+  deleteChildDevice(params.id)
+  // def children = getChildDevices()
+  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+  // if (beaconDevice) {
+  //   deleteChildDevice(beaconDevice.deviceNetworkId)
+  // }
+}
+
+private removeChildDevices(delete) {
+  delete.each {
+    deleteChildDevice(it.deviceNetworkId)
+  }
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Vinli Home Beta
+ *
+ *  Copyright 2015 Daniel
+ *
+ */
+definition(
+    name: "Vinli Home Connect",
+    namespace: "com.vinli.smartthings",
+    author: "Daniel",
+    description: "Allows Vinli users to connect their car to SmartThings",
+    category: "SmartThings Labs",
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_60.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
+    oauth: true)
+  
+preferences {
+  section ("Allow external service to control these things...") {
+    input "switches", "capability.switch", multiple: true, required: true
+    input "locks", "capability.lock", multiple: true, required: true
+  }
+}
+
+mappings {
+  
+  path("/devices") {
+    action: [
+      GET: "listAllDevices"
+    ]
+  }
+	
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+  path("/switches/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+   path("/locks/:command") {
+    action: [
+      PUT: "updateLocks"
+    ]
+  }
+  path("/locks/:id/:command") {
+    action: [
+      PUT: "updateLock"
+    ]
+  }
+  
+   path("/devices/:id/:command") {
+    action: [
+      PUT: "commandDevice"
+    ]
+  }
+}
+
+// returns a list of all devices
+def listAllDevices() {
+   	def resp = []
+   	switches.each {
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub?.name]
+    }
+    
+    locks.each {
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub?.name]
+    }
+    return resp
+}
+ 
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def listSwitches() {
+    def resp = []
+    switches.each {
+      resp << [name: it.displayName, value: it.currentValue("switch"), type: "switch", id: it.id]
+    }
+    return resp
+}
+
+void updateLocks() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    if (command) {
+
+        // check that the switch supports the specified command
+        // If not, return an error using httpError, providing a HTTP status code.
+        locks.each {
+            if (!it.hasCommand(command)) {
+                httpError(501, "$command is not a valid command for all switches specified")
+            } 
+        }
+        
+        // all switches have the comand
+        // execute the command on all switches
+        // (note we can do this on the array - the command will be invoked on every element
+        locks."$command"()
+    }
+}
+
+void updateLock() {
+    def command = params.command
+    
+    locks.each {
+      	if (!it.hasCommand(command)) {
+            httpError(400, "$command is not a valid command for all lock specified")
+        }
+        
+        if (it.id == params.id) {
+            it."$command"()
+        }
+    }
+}
+
+void updateSwitch() {
+    def command = params.command
+    
+    switches.each {
+      	if (!it.hasCommand(command)) {
+            httpError(400, "$command is not a valid command for all switches specified")
+        }
+        
+        if (it.id == params.id) {
+            it."$command"()
+        }
+    }
+}
+
+void commandDevice() {
+    def command = params.command
+    def devices = []
+    
+    switches.each {
+    	devices << it
+    }
+    
+    locks.each {
+    	devices << it
+    }
+    
+    devices.each {
+        if (it.id == params.id) {
+            if (!it.hasCommand(command)) {
+                httpError(400, "$command is not a valid command for specified device")
+            }
+            it."$command"()
+        }
+    }
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    if (command) {
+
+        // check that the switch supports the specified command
+        // If not, return an error using httpError, providing a HTTP status code.
+        switches.each {
+            if (!it.hasCommand(command)) {
+                httpError(400, "$command is not a valid command for all switches specified")
+            } 
+        }
+        
+        // all switches have the comand
+        // execute the command on all switches
+        // (note we can do this on the array - the command will be invoked on every element
+        switches."$command"()
+    }
+}
+
+ def installed() {
+	log.debug "Installed with settings: ${settings}"
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -4,29 +4,33 @@
 import java.text.DecimalFormat
 import groovy.json.JsonSlurper
 
-private apiUrl() 			{ "https://api.netatmo.com" }
-private getVendorName() 	{ "netatmo" }
-private getVendorAuthPath()	{ "https://api.netatmo.com/oauth2/authorize?" }
-private getVendorTokenPath(){ "https://api.netatmo.com/oauth2/token" }
+private getApiUrl()			{ "https://api.netatmo.com" }
+private getVendorName()		{ "netatmo" }
+private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
+private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
-private getClientId() 		{ appSettings.clientId }
-private getClientSecret() 	{ appSettings.clientSecret }
-private getServerUrl() 		{ "https://graph.api.smartthings.com" }
+private getClientId()		{ appSettings.clientId }
+private getClientSecret()	{ appSettings.clientSecret }
+private getServerUrl() 		{ appSettings.serverUrl }
+private getShardUrl()		{ return getApiServerUrl() }
+private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
+private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
 
 // Automatically generated. Make future change here.
 definition(
-    name: "Netatmo (Connect)",
-    namespace: "dianoga",
-    author: "Brian Steere",
-    description: "Netatmo Integration",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-    oauth: true,
-    singleInstance: true
+	name: "Netatmo (Connect)",
+	namespace: "dianoga",
+	author: "Brian Steere",
+	description: "Netatmo Integration",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
+	oauth: true,
+	singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
+	appSetting "serverUrl"
 }
 
 preferences {
@@ -35,35 +39,52 @@ preferences {
 }
 
 mappings {
-	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
-	path("/receiveToken"){action: [POST: "receiveToken", GET: "receiveToken"]}
-    path("/auth"){action: [GET: "auth"]}
+	path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
+	path("/oauth/callback") {action: [GET: "callback"]}
 }
 
 def authPage() {
 	log.debug "In authPage"
-	if(canInstallLabs()) {
-		def description = null
 
-		if (state.vendorAccessToken == null) {
-			log.debug "About to create access token."
+	def description
+	def uninstallAllowed = false
+	def oauthTokenProvided = false
 
-			createAccessToken()
-			description = "Tap to enter Credentials."
+	if (!state.accessToken) {
+		log.debug "About to create access token."
+		state.accessToken = createAccessToken()
+	}
 
-			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: true, install:false) {
-				section { href url:buildRedirectUrl("auth"), style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description }
+	if (canInstallLabs()) {
+
+		def redirectUrl = getBuildRedirectUrl()
+		log.debug "Redirect url = ${redirectUrl}"
+
+		if (state.authToken) {
+			description = "Tap 'Next' to proceed"
+			uninstallAllowed = true
+			oauthTokenProvided = true
+		} else {
+			description = "Click to enter Credentials."
+		}
+
+		if (!oauthTokenProvided) {
+			log.debug "Show the login page"
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
+				section() {
+					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
+					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
+				}
 			}
 		} else {
-			description = "Tap 'Next' to proceed"
-
-			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: true, install:false) {
-				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
+			log.debug "Show the devices page"
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
+				section() {
+					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
+				}
 			}
 		}
-	}
-	else
-	{
+	} else {
 		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
 
 To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
@@ -78,229 +99,175 @@ To update your Hub, access Location Settings in the Main Menu (tap the gear next
 	}
 }
 
-def auth() {
-	redirect location: oauthInitUrl()
-}
-
 def oauthInitUrl() {
 	log.debug "In oauthInitUrl"
 
-	/* OAuth Step 1: Request access code with our client ID */
-
 	state.oauthInitState = UUID.randomUUID().toString()
 
-	def oauthParams = [ response_type: "code",
-		client_id: getClientId(),
-		state: state.oauthInitState,
-		redirect_uri: buildRedirectUrl("receiveToken") ,
-		scope: "read_station"
-		]
-
-	return getVendorAuthPath() + toQueryString(oauthParams)
-}
-
-def buildRedirectUrl(endPoint) {
-	log.debug "In buildRedirectUrl"
-
-	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
-}
-
-def receiveToken() {
-	log.debug "In receiveToken"
-
 	def oauthParams = [
-		client_secret: getClientSecret(),
+		response_type: "code",
 		client_id: getClientId(),
-		grant_type: "authorization_code",
-		redirect_uri: buildRedirectUrl('receiveToken'),
-		code: params.code,
+		client_secret: getClientSecret(),
+		state: state.oauthInitState,
+		redirect_uri: getCallbackUrl(),
 		scope: "read_station"
-		]
-
-	def tokenUrl = getVendorTokenPath()
-	def params = [
-		uri: tokenUrl,
-		contentType: 'application/x-www-form-urlencoded',
-		body: oauthParams,
 	]
 
-    log.debug params
+	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
-	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
-	try {
-		httpPost(params) { response ->
-        	log.debug response.data
-			def slurper = new JsonSlurper();
+	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
+}
 
-			response.data.each {key, value ->
-				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+def callback() {
+	log.debug "callback()>> params: $params, params.code ${params.code}"
 
-				state.vendorRefreshToken = data.refresh_token
-				state.vendorAccessToken = data.access_token
-				state.vendorTokenExpires = now() + (data.expires_in * 1000)
-				return
+	def code = params.code
+	def oauthState = params.state
+
+	if (oauthState == state.oauthInitState) {
+
+		def tokenParams = [
+			client_secret: getClientSecret(),
+			client_id : getClientId(),
+			grant_type: "authorization_code",
+			redirect_uri: getCallbackUrl(),
+			code: code,
+			scope: "read_station"
+		]
+
+		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+
+		def tokenUrl = getVendorTokenPath()
+		def params = [
+			uri: tokenUrl,
+			contentType: 'application/x-www-form-urlencoded',
+			body: tokenParams
+		]
+
+		log.debug "PARAMS: ${params}"
+
+		httpPost(params) { resp ->
+
+			def slurper = new JsonSlurper()
+
+			resp.data.each { key, value ->
+				def data = slurper.parseText(key)
+
+				state.refreshToken = data.refresh_token
+				state.authToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
+				log.debug "swapped token: $resp.data"
 			}
-
 		}
-	} catch (Exception e) {
-		log.debug "Error: $e"
+
+		// Handle success and failure here, and render stuff accordingly
+		if (state.authToken) {
+			success()
+		} else {
+			fail()
+		}
+
+	} else {
+		log.error "callback() failed oauthState != state.oauthInitState"
 	}
+}
 
-	log.debug "State: $state"
+def success() {
+	log.debug "in success"
+	def message = """
+	<p>We have located your """ + getVendorName() + """ account.</p>
+	<p>Tap 'Done' to continue to Devices.</p>
+	"""
+	connectionStatus(message)
+}
 
-	if ( !state.vendorAccessToken ) {  //We didn't get an access token, bail on install
-		return
+def fail() {
+	log.debug "in fail"
+	def message = """
+	<p>The connection could not be established!</p>
+	<p>Click 'Done' to return to the menu.</p>
+	"""
+	connectionStatus(message)
+}
+
+def connectionStatus(message, redirectUrl = null) {
+	def redirectHtml = ""
+	if (redirectUrl) {
+		redirectHtml = """
+			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+		"""
 	}
 
-	/* OAuth Step 3: Use the access token to call into the vendor API throughout your code using state.vendorAccessToken. */
-
 	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width, initial-scale=1">
-        <title>${getVendorName()} Connection</title>
-        <style type="text/css">
-            * { box-sizing: border-box; }
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 100%;
-                padding: 40px;
-                /*background: #eee;*/
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 30px;
-            }
-            p {
-                font-size: 2.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                margin-bottom: 0;
-            }
-        /*
-            p:last-child {
-                margin-top: 0px;
-            }
-        */
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        </head>
-        <body>
-            <div class="container">
-                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-                <p>We have located your """ + getVendorName() + """ account.</p>
-                <p>Tap 'Done' to process your credentials.</p>
+		<!DOCTYPE html>
+		<html>
+		<head>
+		<meta name="viewport" content="width=device-width, initial-scale=1">
+		<title>${getVendorName()} Connection</title>
+		<style type="text/css">
+			* { box-sizing: border-box; }
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				width: 100%;
+				padding: 40px;
+				/*background: #eee;*/
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+			}
+			img:nth-child(2) {
+				margin: 0 30px;
+			}
+			p {
+				font-size: 2.2em;
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				margin-bottom: 0;
+			}
+			/*
+			p:last-child {
+				margin-top: 0px;
+			}
+			*/
+			span {
+				font-family: 'Swiss 721 W01 Light';
+				}
+		</style>
+		</head>
+		<body>
+			<div class="container">
+				<img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+				${message}
 			</div>
         </body>
         </html>
-        """
+	"""
 	render contentType: 'text/html', data: html
 }
 
-def receivedToken() {
-	log.debug "In receivedToken"
-
-	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width, initial-scale=1">
-        <title>Withings Connection</title>
-        <style type="text/css">
-            * { box-sizing: border-box; }
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 560px;
-                padding: 40px;
-                /*background: #eee;*/
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 30px;
-            }
-            p {
-                font-size: 2.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                margin-bottom: 0;
-            }
-        /*
-            p:last-child {
-                margin-top: 0px;
-            }
-        */
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        </head>
-        <body>
-            <div class="container">
-                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-                <p>Tap 'Done' to continue to Devices.</p>
-			</div>
-        </body>
-        </html>
-        """
-	render contentType: 'text/html', data: html
-}
-
-// "
-
 def refreshToken() {
 	log.debug "In refreshToken"
 
@@ -308,8 +275,8 @@ def refreshToken() {
 		client_secret: getClientSecret(),
 		client_id: getClientId(),
 		grant_type: "refresh_token",
-		refresh_token: state.vendorRefreshToken
-		]
+		refresh_token: state.refreshToken
+	]
 
 	def tokenUrl = getVendorTokenPath()
 	def params = [
@@ -318,7 +285,7 @@ def refreshToken() {
 		body: oauthParams,
 	]
 
-	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
+	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
 	try {
 		httpPost(params) { response ->
 			def slurper = new JsonSlurper();
@@ -327,9 +294,9 @@ def refreshToken() {
 				def data = slurper.parseText(key);
 				log.debug "Data: $data"
 
-				state.vendorRefreshToken = data.refresh_token
-				state.vendorAccessToken = data.access_token
-				state.vendorTokenExpires = now() + (data.expires_in * 1000)
+				state.refreshToken = data.refresh_token
+				state.accessToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
 				return true
 			}
 
@@ -338,9 +305,8 @@ def refreshToken() {
 		log.debug "Error: $e"
 	}
 
-	log.debug "State: $state"
-
-	if ( !state.vendorAccessToken ) {  //We didn't get an access token
+	// We didn't get an access token
+	if ( !state.accessToken ) {
 		return false
 	}
 }
@@ -482,13 +448,13 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-	if(now() >= state.vendorTokenExpires) {
+	if(now() >= state.tokenExpires) {
 		refreshToken();
 	}
 
-	query['access_token'] = state.vendorAccessToken
+	query['access_token'] = state.accessToken
 	def params = [
-		uri: apiUrl(),
+		uri: getApiUrl(),
 		path: path,
 		'query': query
 	]

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -1,7 +1,7 @@
 /**
  *  Initial State Event Streamer
  *
- *  Copyright 2015 David Sulpy
+ *  Copyright 2016 David Sulpy
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,9 +11,9 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *  
+ *
  *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
- *  devices for which the user has authorized. Likewise, Initial State's services call this 
+ *  devices for which the user has authorized. Likewise, Initial State's services call this
  *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
  *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
@@ -77,6 +77,62 @@ mappings {
 	}
 }
 
+def getAccessKey() {
+	log.trace "get access key"
+	if (atomicState.accessKey == null) {
+		httpError(404, "Access Key Not Found")
+	} else {
+		[
+			accessKey: atomicState.accessKey
+		]
+	}
+}
+
+def getBucketKey() {
+	log.trace "get bucket key"
+	if (atomicState.bucketKey == null) {
+		httpError(404, "Bucket key Not Found")
+	} else {
+		[
+			bucketKey: atomicState.bucketKey,
+			bucketName: atomicState.bucketName
+		]
+	}
+}
+
+def setBucketKey() {
+	log.trace "set bucket key"
+	def newBucketKey = request.JSON?.bucketKey
+	def newBucketName = request.JSON?.bucketName
+
+	log.debug "bucket name: $newBucketName"
+	log.debug "bucket key: $newBucketKey"
+
+	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
+		atomicState.bucketKey = "$newBucketKey"
+		atomicState.bucketName = "$newBucketName"
+		atomicState.isBucketCreated = false
+	}
+
+	tryCreateBucket()
+}
+
+def setAccessKey() {
+	log.trace "set access key"
+	def newAccessKey = request.JSON?.accessKey
+	def newGrokerSubdomain = request.JSON?.grokerSubdomain
+
+	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
+		atomicState.grokerSubdomain = "$newGrokerSubdomain"
+		atomicState.isBucketCreated = false
+	}
+
+	if (newAccessKey && newAccessKey != atomicState.accessKey) {
+		atomicState.accessKey = "$newAccessKey"
+		atomicState.isBucketCreated = false
+	}
+}
+
 def subscribeToEvents() {
 	if (accelerometers != null) {
 		subscribe(accelerometers, "acceleration", genericHandler)
@@ -90,7 +146,7 @@ def subscribeToEvents() {
 	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
 	}
-	
+
 	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
 	}
@@ -169,85 +225,27 @@ def subscribeToEvents() {
 	}
 }
 
-def getAccessKey() {
-	log.trace "get access key"
-	if (atomicState.accessKey == null) {
-		httpError(404, "Access Key Not Found")
-	} else {
-		[
-			accessKey: atomicState.accessKey
-		]
-	}
-}
-
-def getBucketKey() {
-	log.trace "get bucket key"
-	if (atomicState.bucketKey == null) {
-		httpError(404, "Bucket key Not Found")
-	} else {
-		[
-			bucketKey: atomicState.bucketKey,
-			bucketName: atomicState.bucketName
-		]
-	}
-}
-
-def setBucketKey() {
-	log.trace "set bucket key"
-	def newBucketKey = request.JSON?.bucketKey
-	def newBucketName = request.JSON?.bucketName
-
-	log.debug "bucket name: $newBucketName"
-	log.debug "bucket key: $newBucketKey"
-
-	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
-		atomicState.bucketKey = "$newBucketKey"
-		atomicState.bucketName = "$newBucketName"
-		atomicState.isBucketCreated = false
-	}
-
-	tryCreateBucket()
-}
-
-def setAccessKey() {
-	log.trace "set access key"
-	def newAccessKey = request.JSON?.accessKey
-	def newGrokerSubdomain = request.JSON?.grokerSubdomain
-
-	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
-		atomicState.grokerSubdomain = "$newGrokerSubdomain"
-		atomicState.isBucketCreated = false
-	}
-    
-	if (newAccessKey && newAccessKey != atomicState.accessKey) {
-		atomicState.accessKey = "$newAccessKey"
-		atomicState.isBucketCreated = false
-	}
-}
-
 def installed() {
-	atomicState.version = "1.0.18"
+	atomicState.version = "1.1.0"
+
+	atomicState.isBucketCreated = false
+	atomicState.grokerSubdomain = "groker"
+
 	subscribeToEvents()
 
 	atomicState.isBucketCreated = false
 	atomicState.grokerSubdomain = "groker"
-	atomicState.eventBuffer = []
-
-	runEvery15Minutes(flushBuffer)
 
 	log.debug "installed (version $atomicState.version)"
 }
 
 def updated() {
-	atomicState.version = "1.0.18"
+	atomicState.version = "1.1.0"
 	unsubscribe()
 
 	if (atomicState.bucketKey != null && atomicState.accessKey != null) {
 		atomicState.isBucketCreated = false
 	}
-	if (atomicState.eventBuffer == null) {
-		atomicState.eventBuffer = []
-	}
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		atomicState.grokerSubdomain = "groker"
 	}
@@ -262,7 +260,7 @@ def uninstalled() {
 }
 
 def tryCreateBucket() {
-	
+
 	// can't ship events if there is no grokerSubdomain
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		log.error "streaming url is currently null"
@@ -327,60 +325,40 @@ def genericHandler(evt) {
 	eventHandler(key, value)
 }
 
-// This is a handler function for flushing the event buffer
-// after a specified amount of time to reduce the load on ST servers
-def flushBuffer() {
-	log.trace "About to flush the buffer on schedule"
-	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
-		tryShipEvents()
-	}
-}
-
 def eventHandler(name, value) {
-	log.debug atomicState.eventBuffer
-
-	def eventBuffer = atomicState.eventBuffer
 	def epoch = now() / 1000
-	
-	// if for some reason this code block is being run
-	// but the SmartApp wasn't propery setup during install
-	// we need to set initialize the eventBuffer.
-	if (!atomicState.eventBuffer) {
-		atomicState.eventBuffer = []
-	}
-	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
-	
-	log.debug eventBuffer
 
-	atomicState.eventBuffer = eventBuffer
+	def event = new JsonSlurper().parseText("{\"key\": \"$name\", \"value\": \"$value\", \"epoch\": \"$epoch\"}")
 
-	if (eventBuffer.size() >= 10) {
-		tryShipEvents()
-	}
+	tryShipEvents(event)
+	
+	log.debug "Shipped Event: " + event
 }
 
-// a helper function for shipping the atomicState.eventBuffer to Initial State
-def tryShipEvents() {
+def tryShipEvents(event) {
 
+	def grokerSubdomain = atomicState.grokerSubdomain
 	// can't ship events if there is no grokerSubdomain
-	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+	if (grokerSubdomain == null || grokerSubdomain == "") {
 		log.error "streaming url is currently null"
 		return
 	}
+	def accessKey = atomicState.accessKey
+	def bucketKey = atomicState.bucketKey
 	// can't ship if access key and bucket key are null, so finish trying
-	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
+	if (accessKey == null || bucketKey == null) {
 		return
 	}
 
 	def eventPost = [
-		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
+		uri: "https://${grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${atomicState.bucketKey}",
-			"X-IS-AccessKey": "${atomicState.accessKey}",
+			"X-IS-BucketKey": "${bucketKey}",
+			"X-IS-AccessKey": "${accessKey}",
 			"Accept-Version": "0.0.2"
 		],
-		body: atomicState.eventBuffer
+		body: event
 	]
 
 	try {
@@ -389,13 +367,10 @@ def tryShipEvents() {
 			log.debug "shipped events and got ${resp.status}"
 			if (resp.status >= 400) {
 				log.error "shipping failed... ${resp.data}"
-			} else {
-				// clear the buffer
-				atomicState.eventBuffer = []
 			}
 		}
 	} catch (e) {
 		log.error "shipping events failed: $e"
 	}
-	
+
 }

smartapps/johnrucker/door-jammed-notification.src/door-jammed-notification.groovy

@@ -0,0 +1,66 @@
+/**
+ *  Door Jammed Notification
+ *
+ *  Copyright 2015 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Door Jammed Notification",
+    namespace: "JohnRucker",
+    author: "John.Rucker@Solar-current.com",
+    description: "Sends a SmartThings notification and text messages when your CoopBoss detects a door jam.",
+    category: "My Apps",
+    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
+    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
+    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
+
+preferences {
+    section("When the door state changes") {
+        paragraph "Send a SmartThings notification when the coop's door jammed and did not close."
+		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false            
+        input("recipients", "contact", title: "Recipients", description: "Send notifications to") {
+        	input "phone", "phone", title: "Phone number?", required: true}
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(doorSensor, "doorState", coopDoorStateHandler)
+}
+
+def coopDoorStateHandler(evt) {
+	if (evt.value == "jammed"){
+        def msg = "WARNING ${doorSensor.displayName} door is jammed and did not close!"
+        log.debug "WARNING ${doorSensor.displayName} door is jammed and did not close, texting $phone"
+
+        if (location.contactBookEnabled) {
+            sendNotificationToContacts(msg, recipients)
+        }
+        else {
+            sendPush(msg)
+            if (phone) {
+                sendSms(phone, msg)
+            }
+        }
+	}        
+}