Revert "[CHF-404] [CHF-422] Health check for Leviton DZPA1 Plug-in Appliance Module and GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)"

DVCSMP-2155 ZigBee switch power DH health check

build.gradle

@@ -1,22 +1,25 @@
 import java.nio.charset.StandardCharsets
 import java.nio.file.Paths
+import com.smartthings.deployment.slack.FileUpload
+import com.smartthings.deployment.slack.Message
 
 apply plugin: 'groovy'
 apply plugin: 'smartthings-executable-deployment'
-apply plugin: 'smartthings-hipchat'
+apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.3"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
+        mavenLocal()
         jcenter()
         maven {
             credentials {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "http://artifactory.smartthings.com/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -24,12 +27,76 @@ buildscript {
 repositories {
     mavenLocal()
     jcenter()
+    maven {
+        credentials {
+            username smartThingsArtifactoryUserName
+            password smartThingsArtifactoryPassword
+        }
+        url "https://artifactory.smartthings.com/libs-release-local"
+    }
+}
+
+sourceSets {
+    devicetypes {
+        groovy {
+            srcDirs = ['devicetypes']
+        }
+    }
+    smartapps {
+        groovy {
+            srcDirs = ['smartapps']
+        }
+    }
 }
 
 dependencies {
+    devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
+    smartappsCompile 'org.grails:grails-web:2.3.11'
+    smartappsCompile 'org.json:json:20140107'
 }
 
-hipchatShareFile {
+slackSendMessage {
+    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
+    String token = project.hasProperty('slackToken') ? project.property('slackToken') : null
+    String webhookUrl = project.hasProperty('slackWebhookUrl') ? project.property('slackWebhookUrl') : null
+    String channel = project.hasProperty('slackChannel') ? project.property('slackChannel') : null
+    String drinks = 'https://dl.dropboxusercontent.com/s/m1z5mpd3c83lwev/minion_beer.jpeg?dl=0'
+    String wolverine = 'https://dl.dropboxusercontent.com/s/4lbjqzvm2v033u9/minion_wolverine.jpg?dl=0'
+    String beach = 'https://dl.dropboxusercontent.com/s/rqrfgxk53gfng69/minion_beach.png?dl=0'
+    String iconUrl
+    String color
+    String messageText
+    String username
+    switch (branch) {
+        case 'master':
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
+            break
+        case 'staging':
+            username = 'Dickory'
+            iconUrl = beach
+            color = '#FFDE20'
+            messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
+            break
+        case 'production':
+            username = 'Dock'
+            iconUrl = drinks
+            color = '#FF1D23'
+            messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'
+            break
+        default:
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = "Began deployment of an _SmartThingsPublic[${branch}]_ branch.  Have no idea what's going on."
+    }
     List<String> archives = []
     File rootDir = new File("${project.buildDir}/archives")
     if (rootDir.exists()) {
@@ -42,19 +109,25 @@ hipchatShareFile {
             }
         }
     }
+    Date date = new Date()
+    String fileDate = date.format('yyyy-MM-dd_HH-mm-ss', TimeZone.getTimeZone('GMT'))
 
-    // Set task properties
-    data = archives.join('\n').getBytes(StandardCharsets.UTF_8)
-    fileName = 'deployment-notes.txt'
-    contentType = 'text/html'
-}
-
-hipchatSendNotification {
-    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
-    message = "Began executable deploy of SmartThingsPublic(${branch})."
-    if (branch == 'master') {
-      message += ' (dev shards)'
-    }
-    color = branch == 'master' ? 'yellow' : 'red'
-    notify = true
+    // Required Task Arguments.
+    file = new FileUpload(
+        data: archives.join('\n').getBytes(StandardCharsets.UTF_8),
+        filename: "deployment-notes-${fileDate}.txt",
+        title: 'Deployment Notes',
+        channels: channel,
+        token: token,
+        color: color
+    )
+    message = new Message(
+        webhookUrl: webhookUrl,
+        username: username,
+        asUser: true,
+        iconUrl: iconUrl,
+        channel: channel,
+        fallback: 'Deployment Notification',
+        text: messageText
+    )
 }

circle.yml

@@ -5,7 +5,9 @@ machine:
 
 dependencies:
   override:
-    - echo "Nothing to do."
+    - ./gradlew dependencies -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
+  post:
+    - ./gradlew compileSmartappsGroovy compileDevicetypesGroovy -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
 
 test:
   override:
@@ -15,13 +17,11 @@ deployment:
   develop:
     branch: master
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3BucketName=$S3_BUCKET_NAME_PREPROD_DEV
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_DEV"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
 
   stage:
     branch: staging
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3BucketName=$S3_BUCKET_NAME_PREPROD_STAGING
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_STAGE"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,6 +15,8 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
+	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -0,0 +1,272 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+        
+        capability "Temperature Measurement"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86, 0x84", outClusters: ""//actual NIF
+	}
+
+	simulator {
+		
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        main "FGK"
+        details(["FGK","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+        
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -0,0 +1,239 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+        
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGK"
+        details(["FGK","battery"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -0,0 +1,269 @@
+/**
+ *  Fibaro Flood Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Water Sensor"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+	}
+
+	simulator {
+    
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGFS failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+
+	encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -0,0 +1,282 @@
+/**
+ *  Fibaro Motion Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Illuminance Measurement"
+		capability "Motion Sensor"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+	}
+    
+	simulator {
+		
+    }
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+		}
+        
+        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGMS"
+        details(["FGMS","battery","temperature","illuminance"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"        
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    switch (cmd.sensorType) {
+    	case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+            map.unit = getTemperatureScale()
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+            break
+    	case 3:
+        	map.name = "illuminance"
+            map.value = cmd.scaledSensorValue.toInteger().toString()
+            map.unit = "lux"
+            break
+    }
+
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	if (cmd.eventParameter[0] == 3) {
+            		map.name = "tamper"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+            	}
+            	if (cmd.eventParameter[0] == 8) {
+                	map.name = "motion"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: motion has stopped"
+                }
+        		break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+                
+            case 8:
+                map.name = "motion"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: motion detected"
+                break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+    
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -0,0 +1,795 @@
+/**
+ *  CoopBoss H3Vx
+ *	02/29/16	Fixed app crash with Android by changing the syntax of default state in tile definition. 
+ *				Fixed null value errors during join process.  Added 3 new commands to refresh data.
+ *
+ *	01/18/16	Masked invalid temperature reporting when TempProbe1 is below 0C
+ *				Added setBaseCurrentNE, readBaseCurrentNE, commands as well as baseCurrentNE attribute.  
+ *
+ *  Copyright 2016 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *  Icon location = http://scripts.3dgo.net/smartthings/icons/
+ */
+metadata {
+	definition (name: "CoopBoss H3Vx", namespace: "JohnRucker", author: "John.Rucker@Solar-Current.com") {
+        capability "Refresh"
+        capability "Polling"
+        capability "Sensor"
+        capability "Actuator"
+        capability "Configuration"
+		capability "Temperature Measurement"   
+        capability "Door Control"
+  		capability "Switch"
+        
+        command "closeDoor"
+        command "closeDoorHiI"
+        command "openDoor"
+        command "autoCloseOn"
+        command "autoCloseOff"
+        command "autoOpenOn"
+        command "autoOpenOff"
+        command "setCloseLevelTo"
+        command "setOpenLevelTo" 
+        command "setSensitivityLevel"
+        command "Aux1On"
+        command "Aux1Off"        
+        command "Aux2On"
+        command "Aux2Off" 
+        command "updateTemp1"
+        command "updateTemp2"
+        command "updateSun"
+        command "setNewBaseCurrent"
+        command "setNewPhotoCalibration"
+        command "readNewPhotoCalibration"
+        command "readBaseCurrentNE"
+        command "setBaseCurrentNE"
+        command "updateSensitivity"
+        command "updateCloseLightLevel"
+        command "updateOpenLightLevel"
+
+        attribute "doorState","string"
+        attribute "currentLightLevel","number"
+        attribute "closeLightLevel","number"
+        attribute "openLightLevel","number"
+        attribute "autoCloseEnable","string" 
+        attribute "autoOpenEnable","string"
+        attribute "TempProb1","number"
+        attribute "TempProb2","number"   
+        attribute "dayOrNight","string"
+        attribute "doorSensitivity","number"
+        attribute "doorCurrent","number"  
+        attribute "doorVoltage","number"
+        attribute "Aux1","string"
+        attribute "Aux2","string"
+        attribute "coopStatus","string"
+        attribute "baseDoorCurrent","number"
+        attribute "photoCalibration","number"
+        attribute "baseCurrentNE","string"
+        
+    	fingerprint profileId: "0104", inClusters: "0000,0101,0402", manufacturer: "Solar-Current", model: "Coop Boss"
+    
+	}
+
+	// simulator metadata
+	simulator {
+    }
+    
+    
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffsetCoop", "number", title: "Coop Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input "tempOffsetOutside", "number", title: "Outside Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false        
+	}    
+       
+
+	// UI tile definitions
+	tiles(scale: 2){        
+		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{  
+			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
+			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+			} 
+            tileAttribute ("device.coopStatus", key: "SECONDARY_CONTROL") {
+				attributeState "device.coopStatus", label:'${currentValue}'
+			}
+        }
+                     
+		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{
+      		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
+            attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
+            attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
+            attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
+            attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"
+            } 
+            tileAttribute ("device.doorState", key: "SECONDARY_CONTROL") {
+				attributeState "unknown", label: 'Door is in unknown state. Push to open.'
+                attributeState "open", label: 'Coop door is open. Push to close.'
+                attributeState "opening", label: 'Caution, door is opening!'
+                attributeState "closed", label: 'Coop door is closed. Push to open.'
+                attributeState "closing", label: 'Caution, door is closing!'
+                attributeState "jammed", label: 'Door open! Push for high-force close'
+                attributeState "forced close", label: "Door is closed. Push to open."
+                attributeState "fault", label: 'Door fault check electrical connection.'
+                attributeState "Sent", label: 'Command sent to CoopBoss...'
+			}                 
+    	}        
+        
+		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}    
+        
+		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}            
+        
+		valueTile("TempProb1", "device.TempProb1", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Coop\r${currentValue}°', unit:"F", action:"updateTemp1"}         
+        
+		valueTile("TempProb2", "device.TempProb2", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Outside\r${currentValue}°', unit:"F", action:"updateTemp2"}        
+
+		valueTile("currentLevel", "device.currentLightLevel", width: 2, height: 2, decoration: "flat") {
+        state "default", label:'Sun\r${currentValue}', action:"updateSun"}    
+                
+        valueTile("dayOrNight", "device.dayOrNight", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'${currentValue}.'
+        }             
+                
+        controlTile("SetClSlider", "device.closeLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "closeLightLevel", action:"setCloseLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetClValue", "device.closeLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Close\nSunlight\n${currentValue}', action:'updateCloseLightLevel'
+        }        
+        
+        controlTile("SetOpSlider", "device.openLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setOpenLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetOpValue", "device.openLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Open\nSunlight\n${currentValue}', action:'updateOpenLightLevel'
+        } 
+        
+        controlTile("SetSensitivitySlider", "device.doorSensitivity", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setSensitivityLevel", backgroundColor:"#d04e00"
+        }        
+        
+        valueTile("SetSensitivityValue", "device.doorSensitivity", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Door\nSensitivity\n${currentValue}', action:'updateSensitivity'
+        }          
+        
+        standardTile("refresh", "device.refresh", width: 2, height: 2, decoration: "flat", inactiveLabel: false) {
+		state "default", label:'All', action:"refresh.refresh", icon:"st.secondary.refresh-icon"
+		}   
+        
+		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
+		}        
+        
+		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
+		}            
+        
+		main "doorCtrl"
+		details (["dtlsDoorCtrl", "TempProb1", "TempProb2", "currentLevel", "autoClose", "autoOpen", "dayOrNight",
+        "SetClSlider", "SetClValue", "SetOpSlider", "SetOpValue", "SetSensitivitySlider", "SetSensitivityValue",
+        "aux1", "aux2", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events  def parse(String description) {
+def parse(String description) {
+	log.debug "description: $description"
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    log.debug map
+	//return map ? createEvent(map) : null
+    sendEvent(map)
+    callUpdateStatusTxt() 
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]    
+    def cluster = zigbee.parse(description)
+    log.debug cluster
+    if (cluster.clusterId == 0x0402) {
+        switch(cluster.sourceEndpoint) {
+
+            case 0x39:		// Endpoint 0x39 is the temperature of probe 1
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb1"
+            def celsius = Integer.valueOf(temp,16).shortValue()    
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+                celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)		
+                if (tempOffsetOutside) {
+                    def offset = tempOffsetOutside as int
+					resultMap.value = resultMap.value + offset
+                }                      
+            }
+            sendEvent(name: "temperature", value: resultMap.value, displayed: false)		// set the temperatureMeasurment capability to temperature
+            break
+
+            case 0x40:													// Endpoint 0x40 is the temperature of probe 2
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb2"
+            def celsius = Integer.valueOf(temp,16).shortValue() 									
+            //resultMap.descriptionText = "Prob2 celsius value = ${celsius}"
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+            	celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)			
+                if (tempOffsetCoop) {
+                    def offset = tempOffsetCoop as int
+					resultMap.value = resultMap.value + offset
+                }                                                
+            }                           
+            break
+    	}                        
+	}
+    
+    if (cluster.clusterId == 0x0101 && cluster.command == 0x0b) {		// This is a default response to a command sent to cluster 0x0101 door control
+    	//log.debug "Default Response Data = $cluster.data"
+        switch(cluster.data) {
+        
+        case "[10, 0]":		// 0x0a turn auto close on command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "on"        
+        break                 
+        
+        case "[11, 0]":		// 0x0b turn auto close off command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "off"        
+        break            
+        
+        case "[12, 0]":		// 0x0C turn auto open on command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "on"        
+        break    
+        
+        case "[13, 0]":		// 0x0d turn auto open off command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "off"        
+        break               
+        
+        
+        case "[20, 0]":		// 0x14 Aux1 On command verified 
+        log.info "verified Aux1 On"
+    	sendEvent(name: "switch", value: "on", displayed: false)   
+        resultMap.name = "Aux1"
+        resultMap.value = "on"        
+        break
+
+        case "[21, 0]":		// 0x15 Aux1 Off command verified 
+        log.info "verified Aux1 Off"
+    	sendEvent(name: "switch", value: "off", displayed: false)
+        resultMap.name = "Aux1"
+        resultMap.value = "off"
+        break
+        
+        case "[22, 0]":		// 0x16 Aux2 On command verified 
+        log.info "verified Aux2 On"    
+        resultMap.name = "Aux2"
+        resultMap.value = "on"        
+        break
+
+        case "[23, 0]":		// 0x17 Aux2 Off command verified 
+        log.info "verified Aux2 Off"
+        resultMap.name = "Aux2"
+        resultMap.value = "off"        
+        break        
+        
+        }
+    }
+    return resultMap
+}
+
+private Map parseReportAttributeMessage(String description) {
+    Map resultMap = [:]
+    def descMap = parseDescriptionAsMap(description)
+    //log.debug "read attr descMap --> $descMap"
+    if (descMap.cluster == "0101" && descMap.attrId == "0003") {
+        resultMap.name = "doorState"
+        if (descMap.value == "00"){
+            resultMap.value = "unknown"
+            sendEvent(name: "door", value: "unknown", displayed: false)
+        }else if(descMap.value == "01"){
+            resultMap.value = "closed"
+            sendEvent(name: "door", value: "closed", displayed: false)            
+        }else if(descMap.value == "02"){
+            resultMap.value = "open"    
+            sendEvent(name: "door", value: "open", displayed: false)              
+        }else if(descMap.value == "03"){
+            resultMap.value = "jammed"     
+        }else if(descMap.value == "04"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "05"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "06"){
+            resultMap.value = "closing"  
+            sendEvent(name: "door", value: "closing", displayed: false)              
+        }else if(descMap.value == "07"){
+            resultMap.value = "opening"
+            sendEvent(name: "door", value: "opening", displayed: false)                 
+        }else if(descMap.value == "08"){
+            resultMap.value = "fault"            
+        }else {            
+            resultMap.value = "unknown"
+        }   
+        resultMap.descriptionText = "Door State Changed to ${resultMap.value}"
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0400") { 
+        resultMap.name = "currentLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))      
+        resultMap.displayed = false
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0401") { 
+        resultMap.name = "closeLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0402") { 
+        resultMap.name = "openLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0403") { 
+        resultMap.name = "autoCloseEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}       
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0404") { 
+        resultMap.name = "autoOpenEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}  
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0405") { 
+        resultMap.name = "doorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001        
+
+     } else if (descMap.cluster == "0101" && descMap.attrId == "0408") { 
+        resultMap.name = "doorSensitivity"
+        resultMap.value = (100 - Integer.parseInt(descMap.value, 16))
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0409") { 
+        resultMap.name = "baseDoorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001                
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040a") { 
+        resultMap.name = "doorVoltage"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))  
+        resultMap.value = resultMap.value * 0.001
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040b") { 
+        resultMap.name = "Aux1"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+    	sendEvent(name: "switch", value: "on", displayed: false)        
+        }else{
+        resultMap.value = "off"        
+    	sendEvent(name: "switch", value: "off", displayed: false)        
+        }
+     
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040c") { 
+        resultMap.name = "Aux2"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+        }else{
+        resultMap.value = "off"        
+        }   
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040d") { 
+        resultMap.name = "photoCalibration"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040e") { 
+        resultMap.name = "baseCurrentNE"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    }    
+    return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+    //log.info "ParseCustomMessage called with ${description}"
+	Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        resultMap.name = "temperature"
+    	def rawT = (description - "temperature: ").trim()
+        resultMap.descriptionText = "Temperature celsius value = ${rawT}"
+        def rawTint = Float.parseFloat(rawT)
+        if (rawTint > 65){
+        	resultMap.name = null
+            resultMap.value = null
+            resultMap.descriptionText = "Temperature celsius value = ${rawT} is invalid not updating"
+            log.warn "Invalid temperature value detected! rawT = ${rawT}, description = ${description}"
+        }else if (rawT ==  -32768){											// This number is used to indicate an error in the temperature reading
+            resultMap.value = "ERR"
+        }else{
+            resultMap.value = celsiusToFahrenheit(rawT.toFloat()) as Float
+            sendEvent(name: "TempProb1", value: resultMap.value, displayed: false)		// Workaround for lack of access to endpoint information for Temperature report  
+        }        
+	}
+    resultMap.displayed = false
+    log.info "Temperature reported = ${resultMap.value}"
+    return resultMap    
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+// Added for Temeperature parse
+def getFahrenheit(value) {
+	def celsius = Integer.parseInt(value, 16)
+	return celsiusToFahrenheit(celsius) as Integer
+}
+
+// Private methods
+def callUpdateStatusTxt(){	
+	def cTemp = device.currentState("TempProb1")?.value
+    def cLight = 0
+    def testNull = device.currentState("currentLightLevel")?.value
+    if (testNull != null){
+    cLight = device.currentState("currentLightLevel")?.value as int
+    }   
+	updateStatusTxt(cTemp, cLight)
+}
+
+def updateStatusTxt(currentTemp, currentLight){
+	//log.info "called updateStatusTxt with ${currentTemp}, ${currentLight}"
+    def cTmp = currentTemp
+    def cLL = 10
+    def oLL = 10
+    
+    def testNull = device.currentState("closeLightLevel")?.value
+    if (testNull != null){
+    	cLL = device.currentState("closeLightLevel")?.value as int
+	}
+
+    testNull = device.currentState("openLightLevel")?.value
+    if (testNull != null){
+    	oLL = device.currentState("openLightLevel")?.value as int
+    }   
+    
+    def aOpnEn = device.currentState("autoOpenEnable")?.value
+    def aClsEn = device.currentState("autoCloseEnable")?.value
+    
+        if (currentLight < cLL){  
+        	if (aOpnEn == "on"){
+           		sendEvent(name: "dayOrNight", value: "Sun must be > ${oLL} to auto open", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} open at ${oLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Open is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto open off. Coop ${cTmp}°", displayed: false)                
+                }
+        }else { 
+        	if (aClsEn == "on"){        
+            	sendEvent(name: "dayOrNight", value: "Sun must be < ${cLL} to auto close", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} close at ${cLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Close is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto close off. Coop ${cTmp}°", displayed: false)                   
+                }
+        }
+}
+
+// Commands to device
+def on() {
+	log.debug "on calling Aux1On"
+    Aux1On()
+}
+
+def off() {
+	log.debug "off calling Aux1Off"
+    Aux1Off()
+}
+
+def close() {
+	log.debug "close calling closeDoor"
+	closeDoor()
+}
+
+def open() {
+	log.debug "open calling openDoor"
+	openDoor()
+}
+
+def Aux1On(){
+	log.debug "Sending Aux1 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x14 {}"             
+}
+
+def Aux1Off(){     
+	log.debug "Sending Aux1 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x15 {}"             
+}
+
+def Aux2On(){
+	log.debug "Sending Aux2 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x16 {}"             
+}
+
+def Aux2Off(){
+	log.debug "Sending Aux2 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x17 {}"             
+}
+
+def openDoor() {
+	log.debug "Sending Open command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x1 {}"
+}
+
+def closeDoor() {
+	log.debug "Sending Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0 {}"
+}
+
+def closeDoorHiI() {
+	log.debug "Sending High Current Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x4 {}"
+}
+
+def autoOpenOn() {
+	log.debug "Setting Auto Open On"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0C {}"
+}
+
+def autoOpenOff() {
+	log.debug "Setting Auto Open Off"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0D {}"
+}
+
+def autoCloseOn() {
+	log.debug "Setting Auto Close On"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0A {}"
+}
+
+def autoCloseOff() {
+	log.debug "Setting Auto Close Off"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0B {}"
+}
+
+def setOpenLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Open Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402"											// Read light value   
+    cmd    
+}
+
+def setCloseLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Close Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401"											// Read light value   
+    cmd 
+    
+}
+
+def setSensitivityLevel(cValue) {
+	def cX = 100 - cValue
+	log.debug "Setting Door sensitivity level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value. 
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408"											// Read attribute 
+    cmd    
+}
+
+def setNewBaseCurrent(cValue) {
+	def cX = cValue as int
+	log.info "Setting new BaseCurrent to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value.
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"											// Read attribute 
+    cmd    
+}
+
+def setNewPhotoCalibration(cValue) {
+	def cX = cValue as int
+	log.info "Setting new Photoresister calibration to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D 0x2B {${Integer.toHexString(cX)}}"		// Write attribute.  0x2B is a 32 bit signed integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readNewPhotoCalibration() {
+	log.info "Requesting current Photoresister calibration "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readBaseCurrentNE() {
+	log.info "Requesting base current never exceed setting "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def setBaseCurrentNE(cValue) {
+	def cX = cValue as int
+	log.info "Setting new base Current Never Exceed to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit unsigned integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def poll(){
+	log.debug "Polling Device"
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read probe 1 Temperature 
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read probe 2 Temperature        
+    
+    cmd
+}
+
+def updateTemp1() {
+	log.debug "Sending attribute read request for Temperature Probe1"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd
+}
+
+def updateTemp2() {
+	log.debug "Sending attribute read request for Temperature Probe2"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2   
+    cmd
+}
+
+
+def updateSun() {
+	log.debug "Sending attribute read request for Sun Light Level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd
+}
+
+def updateSensitivity() {
+	log.debug "Sending attribute read request for door sensitivity"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"	// Read Door sensitivity
+    cmd
+}
+
+def updateCloseLightLevel() {
+	log.debug "Sending attribute read close light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	
+    cmd
+}
+
+def updateOpenLightLevel() {
+	log.debug "Sending attribute read open light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	
+    cmd
+}
+
+def refresh() {
+	log.debug "sending refresh command"   
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	// Read Door Close Light Level
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	// Read Door Open Light Level
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0403"	// Read Auto Door Close Settings 
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0404"	// Read Auto Door Open Settings
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd << "delay 150" 
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"    // Object detection sensitivity 
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2    
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0405"    // Current required to close door      
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040B"    // Aux1 Status      
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040C"    // Aux2 Status      
+    cmd << "delay 150"     
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"		// Read Base current
+
+    cmd
+}
+
+def configure() {
+    log.debug "Binding SEP 0x38 DEP 0x01 Cluster 0x0101 Lock cluster to hub"  
+    log.debug "Binding SEP 0x39 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    log.debug "Binding SEP 0x40 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    
+    def cmd = []
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x38 0x01 0x0101 {${device.zigbeeId}} {}"			// Bind to end point 0x38 and the lock cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x39 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x39 and the temperature cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x40 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x40 and the temperature cluster
+    cmd << "delay 1500"    
+    
+    log.info "Sending ZigBee Configuration Commands to Coop Control"
+    return cmd + refresh()
+}
+
+

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -274,6 +274,7 @@ private Map makeTemperatureResult(value) {
         name: 'temperature',
         value: "" + value,
         descriptionText: "${linkText} is ${value}°${temperatureScale}",
+        unit: temperatureScale
     ]
 }
 

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -254,7 +254,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -28,6 +28,7 @@ metadata {
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
+		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -352,7 +353,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -21,6 +21,8 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
 
+		command "configureAfterSecure"
+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
 

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,16 +12,6 @@
  *
  */
  
- /*
- *  Purpose: Arrival Sensor HA DTH File
- *
- *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
- *
- *  Change History:
- *  1. 20160115 TW - Update/Edit to support i18n translations
- *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
- */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,35 +1,26 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: Arrival Sensor HA i18n Translation File
-#
-# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160115 TW Initial release with informal Korean translation.
-#	2. 20160121 TW Added def preference section titles.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
-'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
 '''Tap to set'''.ko=눌러서 설정
 '''Arrival Sensor'''.ko=도착알림 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events / Notifications
-'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
 #==============================================================================

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,16 +87,27 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
+	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -47,6 +47,9 @@ metadata {
 
         command "everywhereJoin"
         command "everywhereLeave"
+
+        command "forceOff"
+        command "forceOn"
     }
 
     /**
@@ -64,8 +67,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -138,8 +143,22 @@ metadata {
  * one place.
  *
  */
-def off() { onAction("off") }
-def on() { onAction("on") }
+def off() {
+    if (device.currentState("switch")?.value == "on") {
+        onAction("off")
+    }
+}
+def forceOff() {
+    onAction("off")
+}
+def on() {
+    if (device.currentState("switch")?.value == "off") {
+        onAction("on")
+    }
+}
+def forceOn() {
+    onAction("on")
+}
 def volup() { onAction("volup") }
 def voldown() { onAction("voldown") }
 def preset1() { onAction("1") }
@@ -238,11 +257,11 @@ def onAction(String user, data=null) {
     def actions = null
     switch (user) {
         case "on":
-            actions = boseSetPowerState(true)
+            boseSetPowerState(true)
             break
         case "off":
             boseSetNowPlaying(null, "STANDBY")
-            actions = boseSetPowerState(false)
+            boseSetPowerState(false)
             break
         case "volume":
             actions = boseSetVolume(data)
@@ -747,8 +766,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +814,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,11 +105,21 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -89,14 +89,17 @@ def parse(String description) {
 			log.debug "TEMP"
 			map.name = "temperature"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
@@ -169,7 +172,7 @@ def setHeatingSetpoint(degrees) {
 
 		def degreesInteger = Math.round(degrees)
 		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
@@ -180,7 +183,7 @@ def setCoolingSetpoint(degrees) {
 	if (degrees != null) {
 		def degreesInteger = Math.round(degrees)
 		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
 	}

devicetypes/smartthings/cree-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/cree-bulb.src/README.md

@@ -0,0 +1,34 @@
+# Connected Cree LED Bulb
+
+
+
+Works with: 
+
+* [Connected Cree LED Bulb](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Cree Connected LED Bulb Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
@@ -22,6 +22,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -58,6 +59,15 @@ metadata {
     }
 }
 
+def installed() {
+    log.debug "${device} installed"
+}
+
+def updated() {
+    log.debug "${device} updated"
+    configureHealthCheck()
+}
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -84,11 +94,31 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def configureHealthCheck() {
+    log.debug "configureHealthCheck"
+    unschedule("healthPoll")
+    runEvery5Minutes("healthPoll")
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    refresh()
 }

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -0,0 +1,45 @@
+# Z-wave Dimmer Switch
+
+
+
+Works with:
+
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
+* **Actuator** - represents that a Device has commands
+* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Check-in interval = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
+* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -20,8 +20,11 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
-		fingerprint inClusters: "0x26"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -42,6 +45,10 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -70,11 +77,30 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "indicator", "refresh"])
+		details(["switch", "level", "refresh"])
 
 	}
 }
 
+def updated(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -138,6 +164,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
@@ -191,6 +218,13 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []
@@ -201,19 +235,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on")
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+void indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off")
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+void indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never")
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+void indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {
@@ -223,4 +257,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint","number"
-		attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint", "number"
+		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "number"
+		attribute "deviceTemperatureUnit", "string"
 	}
 
 	tiles {
@@ -148,15 +148,13 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
-				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
-				event << [value: sendValue, displayed: false]
+				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
@@ -234,9 +232,9 @@ void setHeatingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -253,7 +251,6 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -271,9 +268,9 @@ void setCoolingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -283,18 +280,17 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
-
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.resumeProgram(this, deviceId)) {
+	if (parent.resumeProgram(deviceId)) {
 		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
 		runIn(5, "poll")
 		log.debug "resumeProgram() is done"
 		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
 	} else {
 		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
-		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+		log.error "Error resumeProgram() check parent.resumeProgram(deviceId)"
 	}
 
 }
@@ -354,7 +350,6 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -406,7 +401,7 @@ def generateOperatingStateEvent(operatingState) {
 def off() {
 	log.debug "off"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"off", deviceId))
+	if (parent.setMode ("off", deviceId))
 		generateModeEvent("off")
 	else {
 		log.debug "Error setting new mode."
@@ -420,7 +415,7 @@ def off() {
 def heat() {
 	log.debug "heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"heat", deviceId))
+	if (parent.setMode ("heat", deviceId))
 		generateModeEvent("heat")
 	else {
 		log.debug "Error setting new mode."
@@ -438,7 +433,7 @@ def emergencyHeat() {
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auxHeatOnly", deviceId))
+	if (parent.setMode ("auxHeatOnly", deviceId))
 		generateModeEvent("auxHeatOnly")
 	else {
 		log.debug "Error setting new mode."
@@ -452,7 +447,7 @@ def auxHeatOnly() {
 def cool() {
 	log.debug "cool"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"cool", deviceId))
+	if (parent.setMode ("cool", deviceId))
 		generateModeEvent("cool")
 	else {
 		log.debug "Error setting new mode."
@@ -466,7 +461,7 @@ def cool() {
 def auto() {
 	log.debug "auto"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auto", deviceId))
+	if (parent.setMode ("auto", deviceId))
 		generateModeEvent("auto")
 	else {
 		log.debug "Error setting new mode."
@@ -489,7 +484,7 @@ def fanOn() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -510,7 +505,7 @@ def fanAuto() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -520,63 +515,56 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
-
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
-
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C")
-	{
-		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = roundC(minHeatingSetpoint)
-		minCoolingSetpoint = roundC(minCoolingSetpoint)
-		heatingSetpoint = roundC(heatingSetpoint)
-		coolingSetpoint = roundC(coolingSetpoint)
+	if(location.temperatureScale == "C") {
+		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
+		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
+		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
+		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
+	} else {
+		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
+		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
+		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
+		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
+		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
+		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
 	}
 
+	log.debug "Current Mode = ${mode}"
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-
+	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	if (mode == "heat") {
-
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
-
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	}
 	else if (mode == "cool") {
-
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
-
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 	} else if (mode == "auto") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
-
 	} else if (mode == "off") {
-
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
-
 	} else if (mode == "auxHeatOnly") {
-
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
-
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	}
-
 }
 
 void raiseSetpoint() {
@@ -585,21 +573,31 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
+
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
+
+		if (location.temperatureScale == "C") {
+			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
+		} else {
+			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
+			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
+		}
+
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
-		} else {
-			targetvalue = 0
-		}
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -608,7 +606,7 @@ void raiseSetpoint() {
 			targetvalue = maxCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -622,20 +620,29 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value
-			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+
+		if (location.temperatureScale == "C") {
+			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
 		} else {
-			targetvalue = 0
+			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
+			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
+			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
+			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
+			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
 		}
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -644,7 +651,7 @@ void lowerSetpoint() {
 			targetvalue = minCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -653,66 +660,83 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
-
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	def targetHeatingSetpoint
-	def targetCoolingSetpoint
-
-	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat" || mode == "auxHeatOnly"){
-		if (temp.value > coolingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = coolingSetpoint
-		}
-	} else if (mode == "cool") {
-		//enforce limits before sending request to cloud
-		if (temp.value < heatingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = heatingSetpoint
-			targetCoolingSetpoint = temp.value
-		}
-	}
-
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
-		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow alterSetpoint"
 	} else {
-		log.error "Error alterSetpoint()"
-		if (mode == "heat" || mode == "auxHeatOnly"){
-			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-		} else if (mode == "cool") {
-			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def deviceId = device.deviceNetworkId.split(/\./).last()
+
+		def targetHeatingSetpoint
+		def targetCoolingSetpoint
+
+		def temperatureScaleHasChanged = false
+
+		if (location.temperatureScale == "C") {
+			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
+		} else {
+			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
+				temperatureScaleHasChanged = true
+			}
 		}
+
+		//step1: check thermostatMode, enforce limits before sending request to cloud
+		if (mode == "heat" || mode == "auxHeatOnly"){
+			if (temp.value > coolingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = coolingSetpoint
+			}
+		} else if (mode == "cool") {
+			//enforce limits before sending request to cloud
+			if (temp.value < heatingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = heatingSetpoint
+				targetCoolingSetpoint = temp.value
+			}
+		}
+
+		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+		} else {
+			log.error "Error alterSetpoint()"
+			if (mode == "heat" || mode == "auxHeatOnly"){
+				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			} else if (mode == "cool") {
+				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			}
+		}
+
+		if ( temperatureScaleHasChanged )
+			generateSetpointEvent()
+		generateStatusEvent()
 	}
-	generateStatusEvent()
 }
 
 def generateStatusEvent() {
-
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
-
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -722,36 +746,25 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "cool") {
-
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-
 	} else if (mode == "auto") {
-
 		statusText = "Right Now: Auto"
-
 	} else if (mode == "off") {
-
 		statusText = "Right Now: Off"
-
 	} else if (mode == "auxHeatOnly") {
-
 		statusText = "Emergency Heat"
-
 	} else {
-
 		statusText = "?"
-
 	}
+
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -765,7 +778,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -682,7 +682,7 @@ def setHeatingSetpoint(degrees) {
 	def temperatureScale = getTemperatureScale()
 
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
@@ -691,7 +691,7 @@ def setHeatingSetpoint(degrees) {
 
 def setCoolingSetpoint(degrees) {
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,6 +53,8 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -0,0 +1,174 @@
+/**
+ *  Hue Bloom
+ *
+ *  Philips Hue Type "Color Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Hue Bloom", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Health Check"
+
+		command "setAdjustedColor"
+        command "reset"
+        command "refresh"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles (scale: 2){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+
+		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["rich-control"])
+		details(["rich-control", "reset", "refresh"])
+	}
+}
+
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+void on() {
+	log.trace parent.on(this)
+}
+
+void off() {
+	log.trace parent.off(this)
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setLevel(this, percent)
+    }
+}
+
+void setSaturation(percent) {
+    log.debug "Executing 'setSaturation'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setSaturation(this, percent)
+    }
+}
+
+void setHue(percent) {
+    log.debug "Executing 'setHue'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setHue(this, percent)
+    }
+}
+
+void setColor(value) {
+    def events = []
+    def validValues = [:]
+
+    if (verifyPercent(value.hue)) {
+        validValues.hue = value.hue
+    }
+    if (verifyPercent(value.saturation)) {
+        validValues.saturation = value.saturation
+    }
+    if (value.hex != null) {
+        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            validValues.hex = value.hex
+        } else {
+            log.warn "$value.hex is not a valid color"
+        }
+    }
+    if (verifyPercent(value.level)) {
+        validValues.level = value.level
+    }
+    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        validValues.switch = "off"
+    } else {
+        validValues.switch = "on"
+    }
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
+    }
+}
+
+void reset() {
+    log.debug "Executing 'reset'"
+	def value = [hue:20, saturation:2]
+	setAdjustedColor(value)
+}
+
+void setAdjustedColor(value) {
+    if (value) {
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        // Needed because color picker always sends 100
+        adjusted.level = null
+	    setColor(adjusted)
+    } else {
+        log.warn "Invalid color input $value"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+
+
+def verifyPercent(percent) {
+    if (percent == null)
+        return false
+    else if (percent >= 0 && percent <= 100) {
+        return true
+    } else {
+        log.warn "$percent is not 0-100"
+        return false
+    }
+}
+

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,8 +7,15 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		attribute "serialNumber", "string"
+		capability "Health Check"
+
 		attribute "networkAddress", "string"
+		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+		// Possible values "Online" or "Offline"
+		attribute "status", "string"
+		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
+		// This is also used in the Hue application as ID
+		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -17,25 +24,30 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
-	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
+	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
-	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
-	            attributeState "default", label:'SN: ${currentValue}'
 			}
-        }
-		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
-			state "default", label:'SN: ${currentValue}'
+		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'If removed, Hue lights will not work properly'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
+		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'ID: ${currentValue}'
+		}
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'IP: ${currentValue}'
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "networkAddress"])
+		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
 	}
 }
 
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -56,7 +68,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-        	log.trace "Parsing description"
+			log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -64,18 +76,14 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
-					} else {
-						// Sending Bulbs List to parent"
-                        if (parent.state.inBulbDiscovery)
-                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				}
-				else if (contentType?.contains("xml")) {
+				} else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
+					parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}
 	}
 	results
 }
+

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,6 +1,8 @@
 /**
  *  Hue Bulb
  *
+ *  Philips Hue Type "Extended Color Light"
+ *
  *  Author: SmartThings
  */
 
@@ -15,6 +17,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -28,32 +31,29 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
+    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        state "colorTemperature", action:"color temperature.setColorTemperature"
+    }
 
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
+    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        state "colorTemperature", label: 'WHITES'
+    }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -65,15 +65,21 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
 	def results = []
+
 	def map = description
 	if (description instanceof String)  {
 		log.debug "Hue Bulb stringToMap - ${map}"
 		map = stringToMap(description)
 	}
+
 	if (map?.name && map?.value) {
 		results << createEvent(name: "${map?.name}", value: "${map?.value}")
 	}
@@ -83,97 +89,102 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
-	log.debug "Executing 'setLevel'"
-	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+    log.debug "Executing 'setLevel'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setLevel(this, percent)
+    }
 }
 
 void setSaturation(percent) {
-	log.debug "Executing 'setSaturation'"
-	parent.setSaturation(this, percent)
-	sendEvent(name: "saturation", value: percent, displayed: false)
+    log.debug "Executing 'setSaturation'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setSaturation(this, percent)
+    }
 }
 
 void setHue(percent) {
-	log.debug "Executing 'setHue'"
-	parent.setHue(this, percent)
-	sendEvent(name: "hue", value: percent, displayed: false)
+    log.debug "Executing 'setHue'"
+    if (verifyPercent(percent)) {
+	    log.trace parent.setHue(this, percent)
+    }
 }
 
 void setColor(value) {
-	log.debug "setColor: ${value}, $this"
-	parent.setColor(this, value)
-	if (value.hue) { sendEvent(name: "hue", value: value.hue, displayed: false)}
-	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation, displayed: false)}
-	if (value.hex) { sendEvent(name: "color", value: value.hex)}
-	if (value.level) { sendEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")}
-	sendEvent(name: "switch", value: "on")
+    def events = []
+    def validValues = [:]
+
+    if (verifyPercent(value.hue)) {
+        validValues.hue = value.hue
+    }
+    if (verifyPercent(value.saturation)) {
+        validValues.saturation = value.saturation
+    }
+    if (value.hex != null) {
+        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            validValues.hex = value.hex
+        } else {
+            log.warn "$value.hex is not a valid color"
+        }
+    }
+    if (verifyPercent(value.level)) {
+        validValues.level = value.level
+    }
+    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        validValues.switch = "off"
+    } else {
+        validValues.switch = "on"
+    }
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
+    }
 }
 
 void reset() {
-	log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-	parent.poll()
+    log.debug "Executing 'reset'"
+	setColorTemperature(4000)
 }
 
 void setAdjustedColor(value) {
-	if (value) {
+    if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
+    } else {
+        log.warn "Invalid color input $value"
     }
 }
 
 void setColorTemperature(value) {
-	if (value) {
+    if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-	}
+	    log.trace parent.setColorTemperature(this, value)
+    } else {
+        log.warn "Invalid color temperature $value"
+    }
 }
 
 void refresh() {
-	log.debug "Executing 'refresh'"
-	parent.manualRefresh()
+    log.debug "Executing 'refresh'"
+    parent?.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
+def verifyPercent(percent) {
+    if (percent == null)
+        return false
+    else if (percent >= 0 && percent <= 100) {
+        return true
+    } else {
+        log.warn "$percent is not 0-100"
+        return false
+    }
 }
+

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,6 +1,8 @@
 /**
  *  Hue Lux Bulb
  *
+ *  Philips Hue Type "Dimmable Light"
+ *
  *  Author: SmartThings
  */
 // for the UI
@@ -12,6 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+        capability "Health Check"
 
         command "refresh"
 	}
@@ -31,9 +34,6 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
         }
 
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
@@ -49,6 +49,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -68,22 +72,24 @@ def parse(description) {
 
 // handle commands
 void on() {
-	parent.on(this)
-	sendEvent(name: "switch", value: "on")
+	log.trace parent.on(this)
 }
 
 void off() {
-	parent.off(this)
-	sendEvent(name: "switch", value: "off")
+	log.trace parent.off(this)
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
-	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent)
+    if (percent != null && percent >= 0 && percent <= 100) {
+		parent.setLevel(this, percent)
+	} else {
+    	log.warn "$percent is not 0-100"
+    }
 }
 
 void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }
+

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,109 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+        capability "Health Check"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: 'WHITES'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+}
+
+void off() {
+    log.trace parent.off(this)
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        log.trace parent.setLevel(this, percent)
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        log.trace parent.setColorTemperature(this, value)
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,9 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -23,7 +23,6 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -64,12 +63,8 @@ metadata {
 	}
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -141,7 +136,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -193,14 +187,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+ 		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -209,19 +206,20 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
+	sendEvent(name: "model", value: data.product.name)
 
-	return []
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 }
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,9 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -22,13 +22,12 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
 			}
+
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -53,15 +52,10 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
-
 }
 
-// parse events into attributes
-def parse(String description) {
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
+void installed() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
 }
 
 // handle commands
@@ -71,7 +65,6 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
-		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -123,14 +116,17 @@ def off() {
 	return []
 }
 
-def poll() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -138,16 +134,17 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	return []
-}
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
+	}
 }
 
 def selector() {

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -12,21 +11,12 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
-#==============================================================================
-# Purpose: Mobile Presence i18n Translation File
-#
-# Filename: mobile-presence.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160205 TW Initial release with informal Korean translation.
-#	2. 20160224 TW Updated with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
 '''present'''.ko=집안
 '''not present'''.ko=외출

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,14 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
-===============================================================================
- *  Purpose: Mobile Presence DTH File
- *
- *  Filename: mobile-presence.src/mobile-presence.groovy
- *
- *  Change History:
- *  1. 20160205 TW - Update/Edit to support i18n translations
-===============================================================================
  */
  
 metadata {

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -143,51 +144,14 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0030': // Closed/No Motion/Dry
-            log.debug 'no motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-        case '0x0032': // Open/Motion/Wet
-            log.debug 'motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
+	resultMap.name = 'motion'
+	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
-        case '0x0032': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0033': // Battery Alarm
-            break
-
-        case '0x0034': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
-
-        case '0x0035': // Restore Report
-            break
-
-        case '0x0036': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0038': // Test Mode
-            break
-    }
-    return resultMap
+	return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -0,0 +1,37 @@
+# Nyce Door/Window Sensor (Open/Close Sensor)
+
+
+
+Works with:
+
+* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+
+## Battery Specification
+
+One 3V CR2032 battery required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,27 +13,32 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
-        
-        command "enrollResponse"
- 
- 
+		capability "Health Check"
+
+		command "enrollResponse"
+
+
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
- 
+
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -218,40 +223,33 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	List parsedMsg = description.split(" ")
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	log.debug "parseIasMessage: $description"
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	// Relevant bit field definitions from ZigBee spec
-	def BATTERY_BIT = ( 1 << 3 )
-	def TROUBLE_BIT = ( 1 << 6 )
-	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
-
-	// Convert hex string to integer
-	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
-
-	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
+	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zoneStatus & TROUBLE_BIT) {
+	 if (zs.isTroubleSet()) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zoneStatus & BATTERY_BIT) {
+		 if (zs.isBatterySet()) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -269,9 +267,6 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
-	resultMap_sensor.name = "contact"
-	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
-
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor
@@ -279,23 +274,28 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def configCmds = [
-			//battery reporting and heartbeat
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-
-
+	def enrollCmds = [
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	return configCmds
+	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
@@ -340,7 +340,8 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	[
+	def refreshCmds = [
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
+	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -21,9 +21,6 @@ metadata {
         attribute "colorName", "string"
 
         command "setAdjustedColor"
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
     }
 
     // simulator metadata
@@ -91,7 +88,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +200,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/* 
+/*
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-        
+
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-                        
+
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-    
+
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -19,11 +19,6 @@ metadata {
         capability "Sensor"
 
         attribute "colorName", "string"
-
-        // indicates that device keeps track of heartbeat (in state.heartbeat)
-        attribute "heartbeat", "string"
-        
-
     }
 
     // simulator metadata
@@ -75,9 +70,6 @@ metadata {
 def parse(String description) {
     //log.trace description
 
-    // save heartbeat (i.e. last time we got a message from device)
-    state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
     if (description?.startsWith("catchall:")) {
         if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
         {
@@ -132,7 +124,6 @@ def off() {
 }
 
 def refresh() {
-    sendEvent(name: "heartbeat", value: "alive", displayed:false)
     [
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -133,7 +133,7 @@ def refresh() {
 }
 
 def configure() {
-	onOffConfig() + levelConfig() + powerConfig() + refresh()
+	refresh() + onOffConfig() + levelConfig() + powerConfig()
 }
 
 

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,9 +47,21 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+
+	]
+
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }

devicetypes/smartthings/smartpower-outlet.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -0,0 +1,38 @@
+# SmartPower Outlet
+
+
+
+Works with: 
+
+* [Samsung SmartPower Outlet](https://shop.smartthings.com/#!/products/smartpower-outlet)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Actuator** - represents that a Device has commands
+* **Switch** - can detect state (possible values: on/off)
+* **Refresh** - _refresh()_ command for status updates
+* **Power Meter** - detects power meter for device in either w or kw.
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
+for the different models:
+* [SmartPower Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201084854-SmartPower-Outlet)
+* [Samsung SmartThings Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957620)

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,20 +11,16 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartPower Outlet i18n Translation File
-#
-# Filename: SmartPower-Outlet.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Outlet'''.ko=플러그
+'''Give your device a name'''.ko=기기 이름 설정
+'''Outlet'''.ko= 스마트 플러그 
 # Events descriptionText
-'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
-'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
-'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
+'''On'''.ko= 켜짐
+'''Off'''.ko=꺼짐
+'''Turning On'''.ko=켜는 중
+'''Turning Off'''.ko=끄는 중
 #==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,8 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartPower Outlet DTH File
- *
- *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
-===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -31,9 +23,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-
-		// indicates that device keeps track of heartbeat (in state.heartbeat)
-		attribute "heartbeat", "string"
+		capability "Health Check"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
@@ -65,10 +55,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'
@@ -84,13 +74,19 @@ metadata {
 	}
 }
 
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "${device} updated"
+	configureHealthCheck()
+}
+
 // Parse incoming device messages to generate events
 def parse(String description) {
 	log.debug "description is $description"
 
-	// save heartbeat (i.e. last time we got a message from device)
-	state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
 	def finalResult = zigbee.getKnownDescription(description)
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -117,8 +113,21 @@ def parse(String description) {
 		}
 	}
 	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
+		def cluster = zigbee.parse(description)
+
+		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
+			if (cluster.data[0] == 0x00) {
+				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+			}
+			else {
+				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+			}
+		}
+		else {
+			log.warn "DID NOT PARSE MESSAGE for description : $description"
+			log.debug "${cluster}"
+		}
 	}
 }
 
@@ -129,14 +138,28 @@ def off() {
 def on() {
 	zigbee.on()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.onOffRefresh()
+}
 
 def refresh() {
-	sendEvent(name: "heartbeat", value: "alive", displayed:false)
-	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
+}
+
+def configureHealthCheck() {
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 def configure() {
-	zigbee.onOffConfig() + powerConfig() + refresh()
+
+
+	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -0,0 +1,44 @@
+# Smartsense Moisture Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Moisture Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-water-leak-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202847044-SmartSense-Moisture-Sensor)
+* [Samsung SmartThings Water Leak Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957630)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Water Leak Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,16 +11,10 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Moisture Sensor i18n Translation File
-#
-# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
+'''Dry'''.ko=건조
+'''Wet'''.ko=누수
 '''dry'''.ko=건조
 '''wet'''.ko=누수
 '''battery'''.ko=배터리
@@ -29,13 +22,14 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Water Leak Sensor'''.ko=누수센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Water Leak Sensor'''.ko=누수감지 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,16 +12,9 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Moisture Sensor DTH File
- *
- *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
@@ -31,6 +23,8 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
+		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -90,6 +84,15 @@ metadata {
 	}
 }
 
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "${device} updated"
+	configureHealthCheck()
+}
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -124,14 +127,28 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 				break
 
             case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
                 break
         }
     }
@@ -141,10 +158,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -178,50 +193,17 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0022': // Tamper Alarm
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -264,7 +246,10 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -290,7 +275,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -309,6 +295,13 @@ private Map getMoistureResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -319,22 +312,16 @@ def refresh() {
 	return refreshCmds + enrollResponse()
 }
 
+def configureHealthCheck() {
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,45 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2477 (for Samsung SmartThings Motion Sensor) / CR123A (SmartSense Motion Sensor) 3V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Motion Sensor (original model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903280-SmartSense-Motion-Sensor-original-model-)
+* [SmartSense Motion Sensor (2014 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203077520-SmartSense-Motion-Sensor-2014-model-)
+* [Samsung SmartThings Motion Sensor (2015 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957580-Samsung-SmartThings-Motion-Sensor-2015-model-)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Motion Sensor is stuck showing "Motion Detected" or "No Motion"](https://support.smartthings.com/hc/en-us/articles/200961130-Troubleshooting-Samsung-SmartThings-Motion-Sensor-is-stuck-showing-Motion-Detected-or-No-Motion-)
+* [Troubleshooting: Samsung SmartThings Motion Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Motion Sensor i18n Translation File
-#
-# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리
@@ -28,13 +18,16 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Motion Sensor'''.ko=모션 센서
+'''motion'''.ko= 동작 감지 
+'''no motion'''.ko=동작 없음
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,16 +12,9 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Motion Sensor DTH File
- *
- *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -31,6 +23,8 @@ metadata {
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -94,6 +88,15 @@ metadata {
 	}
 }
 
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "${device} updated"
+	configureHealthCheck()
+}
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -128,19 +131,37 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 				break
 
 			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
 				break
 
 			case 0x0406:
-				log.debug 'motion'
-				resultMap.name = 'motion'
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					log.debug 'motion'
+					resultMap.name = 'motion'
+				}
 				break
 		}
 	}
@@ -150,10 +171,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -191,52 +210,18 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0025': // Restore Report
-			break
-
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -280,7 +265,10 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -306,7 +294,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -321,6 +310,13 @@ private Map getMotionResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -331,23 +327,16 @@ def refresh() {
 	return refreshCmds + enrollResponse()
 }
 
+def configureHealthCheck() {
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,6 +15,7 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +25,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +74,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +129,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +142,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +154,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -168,44 +169,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0025': // Restore Report
-            break
-
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -240,7 +205,10 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}
@@ -260,7 +228,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -286,13 +255,9 @@ def refresh() {
 }
 
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -301,7 +266,7 @@ def configure() {
 		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+    return refresh() + configCmds  // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-multi-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -0,0 +1,45 @@
+# Smartsense Multi Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Multi Sensor](https://shop.smartthings.com/#!/products/smartsense-multi)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Three Axis** - monitors the state of a single axis
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Sensor** - detects sensor events
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Acceleration Sensor** - allows for acceleration detection.
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2450 (for Samsung SmartThings Multipurpose Sensor) battery / Two AAAA (for SmartSense Multi Sensor) batteries required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor is stuck on "open" or "closed"](https://support.smartthings.com/hc/en-us/articles/200955940-Troubleshooting-Samsung-SmartThings-Multipurpose-Sensor-is-stuck-on-open-or-closed-)
+* [Troubleshooting: Temperature reading for the Samsung SmartThings Multipurpose Sensor is off](https://support.smartthings.com/hc/en-us/articles/200756845-Troubleshooting-Temperature-reading-for-the-Samsung-SmartThings-Multipurpose-Sensor-is-off)
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Multi Sensor i18n Translation File
-#
-# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160117 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예
@@ -31,15 +22,20 @@
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Multipurpose Sensor'''.ko=멀티 센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Multipurpose Sensor'''.ko=문 및 창 센서
 # Events descriptionText
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''Inactive'''.ko=비활성 상태
+'''Active'''.ko=활성 상태
+'''Open'''.ko= 열림이 감지될 때
+'''Closed'''.ko=닫힘
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,16 +12,8 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Multi Sensor DTH File
- *
- *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -35,6 +26,7 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
+		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
@@ -83,19 +75,19 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',
@@ -123,6 +115,34 @@ metadata {
 	}
  }
 
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	configureHealthCheck()
+}
+
 def parse(String description) {
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
@@ -155,20 +175,33 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 			break
 
 			case 0xFC02:
-			log.debug 'ACCELERATION'
+				log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
+				if (cluster.command == 0x07) {
+					if(cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+			break
 		}
 	}
 
@@ -177,10 +210,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -233,79 +264,22 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+
 			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 			}
-		break
 
-		case '0x0021': // Open/Motion/Wet
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0022': // Tamper Alarm
-		break
-
-		case '0x0023': // Battery Alarm
-		break
-
-		case '0x0024': // Supervision Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
-
-		case '0x0025': // Restore Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0026': // Trouble/Failure
-		break
-
-		case '0x0028': // Test Mode
-		break
-	}
 	return resultMap
 }
 
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-	else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-}
-
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 		} else {
-			return celsiusToFahrenheit(celsius) as Integer
+			return Math.round(celsiusToFahrenheit(celsius))
 		}
 	}
 
@@ -347,7 +321,10 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -367,10 +344,11 @@ private Map getTemperatureResult(value) {
 			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText,
-    translatable: true
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -405,6 +383,13 @@ private getAccelerationResult(numValue) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -412,78 +397,44 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
 
+def configureHealthCheck(){
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	def configCmds = zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300) +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
-
-	return configCmds + refresh()
+	return refresh() + configCmds
 }
 
 private getEndpointId() {

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -203,7 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			results << getContactResult(part, description)
+			results.addAll(getContactResult(part, description))
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -316,7 +316,7 @@ private List getContactResult(part, description) {
 	results
 }
 
-private getAccelerationResult(part, description) {
+private Map getAccelerationResult(part, description) {
 	def name = "acceleration"
 	def value = part.endsWith("1") ? "active" : "inactive"
 	def linkText = getLinkText(device)
@@ -335,7 +335,7 @@ private getAccelerationResult(part, description) {
 	]
 }
 
-private getTempResult(part, description) {
+private Map getTempResult(part, description) {
 	def name = "temperature"
 	def temperatureScale = getTemperatureScale()
 	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
@@ -360,7 +360,7 @@ private getTempResult(part, description) {
 	]
 }
 
-private getXyzResult(results, description) {
+private Map getXyzResult(results, description) {
 	def name = "threeAxis"
 	def value = "${results.x},${results.y},${results.z}"
 	def linkText = getLinkText(device)
@@ -379,7 +379,7 @@ private getXyzResult(results, description) {
 	]
 }
 
-private getBatteryResult(part, description) {
+private Map getBatteryResult(part, description) {
 	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
 	def name = "battery"
 	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
@@ -400,7 +400,7 @@ private getBatteryResult(part, description) {
 	]
 }
 
-private getRssiResult(part, description, lastHop=false) {
+private Map getRssiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopRssi" : "rssi"
 	def valueString = part.split(":")[1].trim()
 	def value = (Integer.parseInt(valueString) - 128).toString()
@@ -431,7 +431,7 @@ private getRssiResult(part, description, lastHop=false) {
  * Note: To make the signal strength indicator more accurate, we could combine
  * LQI with RSSI.
  */
-private getLqiResult(part, description, lastHop=false) {
+private Map getLqiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopLqi" : "lqi"
 	def valueString = part.split(":")[1].trim()
 	def percentageOf = 255

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,17 +14,20 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
  		capability "Battery"
  		capability "Configuration"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
+		capability "Health Check"
+		capability "Sensor"
 
+		command "enrollResponse"
  	}
 
  	simulator {
@@ -170,40 +173,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0022': // Tamper Alarm
-        break
-
-        case '0x0023': // Battery Alarm
-        break
-
-        case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0026': // Trouble/Failure
-        break
-
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {
@@ -233,7 +205,10 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 
@@ -250,9 +225,10 @@ def getTemperature(value) {
 		}
 		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 		return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			unit: temperatureScale
 		]
 	}
 
@@ -299,13 +275,10 @@ def getTemperature(value) {
 	}
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -318,7 +291,7 @@ def configure() {
 		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	return refresh() + configCmds // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -0,0 +1,41 @@
+# Smartsense Open/Closed Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Open/Closed Sensor](https://shop.smartthings.com/#!/packs/smartsense-open-closed-sensor/)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [SmartSense Open/Closed Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202836844-SmartSense-Open-Closed-Sensor)

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,24 +22,26 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+		capability "Health Check"
+		capability "Sensor"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -71,10 +74,19 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "${device} updated"
+	configureHealthCheck()
+}
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +100,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,22 +111,35 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
                 break
 
             case 0x0402:
-                log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07){
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
                 break
         }
     }
@@ -124,10 +149,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -135,14 +158,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -151,10 +174,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -165,42 +188,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -213,11 +204,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -228,7 +219,10 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -247,7 +241,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -262,6 +257,13 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -272,23 +274,17 @@ def refresh() {
 	return refreshCmds + enrollResponse()
 }
 
+def configureHealthCheck() {
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
 def configure() {
-
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -0,0 +1,41 @@
+# SmartSense Temp/Humidity Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartSense Temp/Humidity Sensor](https://shop.smartthings.com/#!/products/smartsense-temp-humidity-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Relative Humidity Measurement** - defines device measures relative humidity
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 battery is required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203040294)

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -20,6 +20,8 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
+		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -67,6 +69,15 @@ metadata {
 	}
 }
 
+def installed() {
+	log.debug "${device} installed"
+}
+
+def updated() {
+	log.debug "${device} updated"
+	configureHealthCheck()
+}
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -91,20 +102,37 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
                 break
 
             case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
 
 			case 0xFC45:
-                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-                resultMap = getHumidityResult(display)
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+					resultMap = getHumidityResult(display)
+				}
                 break
         }
     }
@@ -114,10 +142,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
-    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -204,7 +230,10 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -223,50 +252,48 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
 private Map getHumidityResult(value) {
 	log.debug 'Humidity'
-	return [
-		name: 'humidity',
-		value: value,
-		unit: '%'
-	]
+	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
-	[
+	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020)
+}
 
-		"zcl mfg-code 0xC2DF", "delay 1000",
-		"zcl global read 0xFC45 0", "delay 1000",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
-	]
+def configureHealthCheck() {
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 def configure() {
-
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
+	def humidityConfigCmds = [
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,6 +16,8 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,6 +1,8 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
+		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,6 +15,8 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
+		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
+		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,6 +16,8 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,6 +16,7 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
+		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,6 +16,8 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
+		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tile-ux/README.md

@@ -0,0 +1,42 @@
+# Device Tiles Examples and Reference
+
+This package contains examples of Device tiles, organized by tile type.
+
+## Purpose
+
+Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
+
+The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
+
+## Installation
+
+1. Self-publish the Device Handlers in this package.
+2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
+3. Install the SmartApp from the Marketplace, under "My Apps".
+4. Select the simulated devices you want to install and press "Done".
+
+The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
+You may wish to create a new room for these simulated devices for easy access.
+
+## Usage
+
+Each simulated device can be interacted with like other devices.
+You can use the mobile app to interact with the tiles to see how they look and behave.
+
+## Troubleshooting
+
+If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
+Also check live logging to see if there is a specific tile that is causing installation issues.
+
+## FAQ
+
+*Question: A tile isn't behaving as expected. What should I do?*
+
+QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
+
+Developers may file a support ticket, and reference the specific tile and issue observed.
+
+*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
+
+We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
+That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.

devicetypes/smartthings/tile-ux/tile-basic-carousel.src/tile-basic-carousel.groovy

@@ -0,0 +1,225 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "carouselDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("default", action: "setTemperature")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		main("thermostatMulti")
+		details([
+			"thermostatMulti"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -0,0 +1,59 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "colorWheelDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Color Control"
+	}
+
+	tiles(scale: 2) {
+		valueTile("currentColor", "device.color") {
+			state "color", label: '${currentValue}', defaultState: true
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
+			state "color", action: "color control.setColor"
+		}
+
+		main("currentColor")
+		details([
+			"rgbSelector"
+		])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def setColor(value) {
+	log.debug "setting color: $value"
+    if (value.hex) { sendEvent(name: "color", value: value.hex) }
+    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
+    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
+}
+
+def setSaturation(percent) {
+	log.debug "Executing 'setSaturation'"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "Executing 'setHue'"
+	sendEvent(name: "hue", value: percent)
+}

devicetypes/smartthings/tile-ux/tile-basic-presence.src/tile-basic-presence.groovy

@@ -0,0 +1,63 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "presenceDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Presence Sensor"
+
+		command "arrived"
+		command "departed"
+	}
+
+	tiles(scale: 2) {
+		// You only get a presence tile view when the size is 3x3 otherwise it's a value tile
+		standardTile("presence", "device.presence", width: 3, height: 3, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
+		}
+
+		standardTile("notPresentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("not present", label:'not present', backgroundColor:"#ffffff", action:"departed")
+		}
+
+		standardTile("presentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("present", label:'present', backgroundColor:"#53a7c0", action:"arrived")
+		}
+
+		main("presence")
+		details([
+			"presence", "presenceControl", "notPresentBtn", "presentBtn"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "present")
+}
+
+def parse(String description) {
+}
+
+def arrived() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "present")
+}
+
+def departed() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "not present")
+}

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -0,0 +1,75 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "sliderDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		command "setRangedLevel", ["number"]
+	}
+
+	tiles(scale: 2) {
+		controlTile("tinySlider", "device.level", "slider", height: 2, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("mediumSlider", "device.level", "slider", height: 2, width: 4, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("largeSlider", "device.level", "slider", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("rangeSlider", "device.rangedLevel", "slider", height: 2, width: 4, range: "(20..80)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
+			state "range", label:'${currentValue}', defaultState: true
+		}
+
+		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		main("rangeValue")
+		details([
+			"tinySlider", "mediumSlider",
+			"largeSlider",
+			"rangeSlider", "rangeValue",
+			"rangeSliderConstrained"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "level", value: 63)
+	sendEvent(name: "rangedLevel", value: 47)
+}
+
+def parse(String description) {
+}
+
+def setLevel(value) {
+	log.debug "setting level to $value"
+	sendEvent(name:"level", value:value)
+}
+
+def setRangedLevel(value) {
+	log.debug "setting ranged level to $value"
+	sendEvent(name:"rangedLevel", value:value)
+}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -0,0 +1,121 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "standardDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch"
+	}
+
+	tiles(scale: 2) {
+		// standard tile with actions
+		standardTile("actionRings", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with actions
+		standardTile("actionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true, decoration: "flat") {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile without actions
+		standardTile("noActionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}',icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with only a label
+		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
+		}
+
+		// standard flat tile with icon and label
+		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
+		}
+
+		// standard flat tile with only icon (Refreh text is IN the icon file)
+		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+		}
+
+		// standard with defaultState = true
+		standardTile("flatDefaultState", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "on", label: 'Pass!', icon: "st.switches.switch.on", defaultState: true
+		}
+
+		// standard with implicit defaultState based on order (0 index is selected)
+		standardTile("flatImplicitDefaultState1", "null", width: 2, height: 2, decoration: "flat") {
+			state "on", label: 'Pass!', icon: "st.switches.switch.on"
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+		}
+
+		// standard with implicit defaultState based on state.name == default
+		standardTile("flatImplicitDefaultState2", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "default", label: 'Pass!', icon: "st.switches.switch.on"
+		}
+
+		// utility tiles to fill the spaces
+		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
+			state "emptySmall", label:'', defaultState: true
+		}
+		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
+			state "emptyBigger", label:'', defaultState: true
+		}
+
+		// multi-line text (explicit newlines)
+		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
+			state "multiLine", label: '${currentValue}', defaultState: true
+		}
+
+		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
+			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+		}
+
+		main("actionRings")
+		details([
+			"actionRings", "actionFlat", "noActionFlat",
+
+			"flatLabel", "flatIconLabel", "flatIcon",
+
+			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+
+			"multiLine", "multiLineWithIcon"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "switch", value: "off")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
+}
+
+def parse(String description) {
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+}

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -0,0 +1,106 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "valueDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Sensor"
+	}
+
+	tiles(scale: 2) {
+		valueTile("text", "device.text", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("longText", "device.longText", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("integer", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("pi", "device.pi", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("bgColor", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
+		}
+
+		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#ff0000"],
+				[value: 90, color: "#0000ff"]
+			]
+		}
+
+		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#333333"]
+			]
+		}
+
+		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
+			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
+				[value: 10, color: "#990000"],
+				[value: 10, color: "#000099"]
+			]
+		}
+
+		valueTile("noValue", "device.nada", width: 4, height: 2) {
+			state "noval", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+		}
+
+		main("text")
+		details([
+			"text", "longText", "integer",
+            "integerFloat", "pi", "floatAsText",
+            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
+            "bgColorRangeConflict", "noValue",
+            "multiLine", "multiLineWithIcon"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "text", value: "Test")
+	sendEvent(name: "longText", value: "The Longer The Text, The Better The Test")
+	sendEvent(name: "integer", value: 47)
+	sendEvent(name: "integerFloat", value: 47.0)
+	sendEvent(name: "pi", value: 3.14159)
+	sendEvent(name: "floatAsText", value: "3.14159")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
+}
+
+def parse(String description) {
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -0,0 +1,151 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "genericDeviceTile", namespace: "smartthings/tile-ux", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Switch Level"
+
+		command "levelUp"
+		command "levelDown"
+		command "randomizeLevel"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"basicTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		multiAttributeTile(name:"sliderTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
+			}
+			tileAttribute("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
+				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
+					[value: 0, color: "#ff0000"],
+					[value: 20, color: "#ffff00"],
+					[value: 40, color: "#00ff00"],
+					[value: 60, color: "#00ffff"],
+					[value: 80, color: "#0000ff"],
+					[value: 100, color: "#ff00ff"]
+				]
+			}
+			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "VALUE_CONTROL") {
+				attributeState "VALUE_UP", action: "levelUp"
+				attributeState "VALUE_DOWN", action: "levelDown"
+			}
+		}
+		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
+
+		main(["basicTile"])
+		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
+	}
+}
+
+def installed() {
+	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
+	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
+}
+
+def parse(String description) {
+	// This is a simulated device. No incoming data to parse.
+}
+
+def on() {
+	log.debug "turningOn"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "turningOff"
+	sendEvent(name: "switch", value: "off")
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+}
+
+def randomizeLevel() {
+	def level = Math.round(Math.random() * 100)
+	setLevel(level)
+}
+
+def levelUp() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level < 100) {
+		level = level + 1
+	}
+	setLevel(level)
+}
+
+def levelDown() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level > 0) {
+		level = level - 1
+	}
+	setLevel(level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -0,0 +1,208 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "lightingDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Power Meter"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+		command "reset"
+		command "refresh"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'Power level: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoPower", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSlider", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The power level is currently: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSliderOrColor", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The light is currently consuming this amount of power: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+		}
+
+		valueTile("color", "device.color", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "color", label: '${currentValue}'
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+		}
+
+		main(["switch"])
+		details(["switch", "switchNoPower", "switchNoSlider", "switchNoSliderOrColor", "color", "refresh", "reset"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+def on() {
+	//log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	//log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+def nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+	def power = Math.round(percent / 1.175) * 0.1
+	sendEvent(name: "power", value: power)
+}
+
+def setSaturation(percent) {
+	log.debug "setSaturation: ${percent}, $this"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "setHue: ${percent}, $this"
+	sendEvent(name: "hue", value: percent)
+}
+
+def setColor(value) {
+	log.debug "setColor: ${value}, $this"
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+}
+
+def setAdjustedColor(value) {
+	if (value) {
+		log.trace "setAdjustedColor: ${value}"
+		def adjusted = value + [:]
+		adjusted.hue = adjustOutgoingHue(value.hue)
+		// Needed because color picker always sends 100
+		adjusted.level = null
+		setColor(adjusted)
+	}
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -0,0 +1,122 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "mediaPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Music Player"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState("paused", label:"Paused",)
+				attributeState("playing", label:"Playing")
+				attributeState("stopped", label:"Stopped")
+			}
+			tileAttribute("device.status", key: "MEDIA_STATUS") {
+				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
+				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
+				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
+			}
+			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
+				attributeState("status", action:"music Player.previousTrack", defaultState: true)
+			}
+			tileAttribute("device.status", key: "NEXT_TRACK") {
+				attributeState("status", action:"music Player.nextTrack", defaultState: true)
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState("level", action:"music Player.setLevel")
+			}
+			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
+				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
+				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
+			}
+			tileAttribute("device.trackDescription", key: "MARQUEE") {
+				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
+			}
+		}
+
+		main "mediaMulti"
+		details(["mediaMulti"])
+	}
+}
+
+def installed() {
+	state.tracks = [
+		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
+		"Careless Whisper\nWham!\nMake It Big",
+		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
+		"Shake It Off\nTaylor Swift\n1989",
+		"Ironic\nAlanis Morissette\nJagged Little Pill",
+		"Hotline Bling\nDrake\nHotline Bling - Single"
+	]
+	state.currentTrack = 0
+
+	sendEvent(name: "level", value: 72)
+	sendEvent(name: "mute", value: "unmuted")
+	sendEvent(name: "status", value: "stopped")
+}
+
+def parse(description) {
+	// No parsing will happen with this simulated device.
+}
+
+def play() {
+	sendEvent(name: "status", value: "playing")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def pause() {
+	sendEvent(name: "status", value: "paused")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def stop() {
+	sendEvent(name: "status", value: "stopped")
+}
+
+def previousTrack() {
+	state.currentTrack = state.currentTrack - 1
+	if (state.currentTrack < 0)
+		state.currentTrack = state.tracks.size()-1
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def nextTrack() {
+	state.currentTrack = state.currentTrack + 1
+	if (state.currentTrack == state.tracks.size())
+		state.currentTrack = 0
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def mute() {
+	sendEvent(name: "mute", value: "muted")
+}
+
+def unmute() {
+	sendEvent(name: "mute", value: "unmuted")
+}
+
+def setLevel(level) {
+	sendEvent(name: "level", value: level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -0,0 +1,343 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "thermostatDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+		}
+		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("temp", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+			}
+		}
+		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "tempDown", label:'down', action:"tempDown", defaultState: true
+		}
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "tempUp", label:'up', action:"tempUp", defaultState: true
+		}
+
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
+		}
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heatDown", label:'down', action:"heatDown", defaultState: true
+		}
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heatUp", label:'up', action:"heatUp", defaultState: true
+		}
+
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "coolDown", label:'down', action:"coolDown", defaultState: true
+		}
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "coolUp", label:'up', action:"coolUp", defaultState: true
+		}
+
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
+			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
+			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
+		}
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
+			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
+			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
+		}
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+			state "idle", label:'${name}', backgroundColor:"#ffffff"
+			state "heating", label:'${name}', backgroundColor:"#ffa81e"
+			state "cooling", label:'${name}', backgroundColor:"#269bd2"
+		}
+
+
+		main("thermostatFull")
+		details([
+			"thermostatFull", "thermostatNoHumidity", "thermostatBasic",
+			"temperature","tempDown","tempUp",
+			"mode", "fanMode", "operatingState",
+			"heatingSetpoint", "heatDown", "heatUp",
+			"coolingSetpoint", "coolDown", "coolUp"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+
+	if (mode == "off") {
+		idle = true
+	}
+
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def poll() {
+	null
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-videoplayer.src/tile-multiattribute-videoplayer.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "videoPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Configuration"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Refresh"
+		capability "Switch"
+
+		// custom commands
+		command "start"
+		command "stop"
+		command "setProfileHD"
+		command "setProfileSDH"
+		command "setProfileSDL"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "videoPlayer", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+
+			tileAttribute("device.profile", key: "STREAM_QUALITY") {
+				attributeState("1", label: "720p", action: "setProfileHD", defaultState: true)
+				attributeState("2", label: "h360p", action: "setProfileSDH", defaultState: true)
+				attributeState("3", label: "l360p", action: "setProfileSDL", defaultState: true)
+			}
+
+			tileAttribute("device.betaLogo", key: "BETA_LOGO") {
+				attributeState("betaLogo", label: "", value: "", defaultState: true)
+			}
+		}
+		
+		multiAttributeTile(name: "videoPlayerMin", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+		}
+
+		main("videoPlayer")
+		details([
+			"videoPlayer", "videoPlayerMin"
+		])
+	}
+}
+
+def installed() {
+}
+
+def parse(String description) {
+}
+
+def refresh() {
+	log.trace "refresh()"
+	// no-op
+}
+
+def on() {
+	log.trace "on()"
+	// no-op
+}
+
+def off() {
+	log.trace "off()"
+	// no-op
+}
+
+def setProfile(profile) {
+	log.trace "setProfile(): ${profile}"
+	sendEvent(name: "profile", value: profile, displayed: false)
+}
+
+def setProfileHD() {
+	setProfile(1)
+}
+
+def setProfileSDH() {
+	setProfile(2)
+}
+
+def setProfileSDL() {
+	setProfile(3)
+}
+
+def start() {
+	log.trace "start()"
+	def dataLiveVideo = [
+		OutHomeURL  : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		InHomeURL   : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		ThumbnailURL: "http://cdn.device-icons.smartthings.com/camera/dlink-indoor@2x.png",
+		cookie      : [key: "key", value: "value"]
+	]
+
+	def event = [
+		name           : "stream",
+		value          : groovy.json.JsonOutput.toJson(dataLiveVideo).toString(),
+		data		   : groovy.json.JsonOutput.toJson(dataLiveVideo),
+		descriptionText: "Starting the livestream",
+		eventType      : "VIDEO",
+		displayed      : false,
+		isStateChange  : true
+	]
+	sendEvent(event)
+}
+
+def stop() {
+	log.trace "stop()"
+}

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -0,0 +1,42 @@
+# Tyco Door Window Sensor
+
+
+
+Works with: 
+
+* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (open/close)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - can measure the device temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Contact sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 min
+
+## Battery Specification
+
+3V CR2032 battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
+Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
+It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +22,29 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+		capability "Health Check"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +60,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +90,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +101,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +127,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +149,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -161,42 +163,11 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +180,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +194,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -242,7 +214,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -257,53 +230,51 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
+}
+
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	[
-    
+	def refreshCmds = [
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
-        "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,7 +33,7 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"